Displaying publications 761 - 780 of 1133 in total

Abstract:
Sort:
  1. Fathin Nadhirah Binti Kamal Ariffin, Yusilawati Ahmad Nor, Sarina Sulaiman, Nur Ayuni Jamal
    MyJurnal
    This paper addresses the treatment of waste engine oils (WEO) by acid/clay refining method using glacial acetic acid. An optimization of the process parameters in terms of settling time, stirring speed and mixing temperature for treating the WEO was performed using Response Surface Methodology to improve the quality of treated lubricating oil. The quality of the treated WEO (Castrol brand) was evaluated in terms of viscosity index and flash point value. The treated fuel quality is found to have about 95% similarity to the fresh oil used as a standard at the settling time of 24 hours, temperature of 50 °C and mixing speed of 150 rpm. Analysis of variances (ANOVA) showed that settling time plays the most significant parameters of the process followed by the mixing temperature. Solid contaminants which were collected after the treatment were analyzed using SEM-EDS. They contained rough heteregenous shaped particles with elements such as carbon (97%), calcium (1.12%), zinc (0.74%), sulphur (0.73%) and phosphorus (0.29%). Then, four different brands of WEO (Liqui Moly, Castrol, Shell and Pennzoil) were treated at the optimized conditions to determine the feasibility of the method to treat any brands of WEO. It can be concluded that the optimized treatement method is suitable to treat most of WEO. The findings of this study provide the information on the best process condition for treating WEO as well as the solid contaminants present in it.
    Matched MeSH terms: Oils
  2. Nur Afiqah Saparin, Mohd Muzamir Mahat, Muhd Fauzi Safian, Shahrul Hisham Zainal Ariffin, Nor Azah Mohamad Ali, Zaidah Zainal Ariffin
    Science Letters, 2020;14(1):62-67.
    MyJurnal
    The evolution of cosmetic products results in the growing demands for cosmetics that are preservatives free. Plant essential oils were found to be a promising antimicrobial and also antioxidant agent. In this study, Cymbopogon citratus (lemongrass), Laurus nobilis (bay leaf) and Backhousia citriodora (lemon myrtle) essential oils were selected and evaluated for their antimicrobial properties. It was found that Laurus nobilis exhibited strong antimicrobial activity against the selected bacteria Streptococcus saprophyticus (ATCC 49619), Streptococcus aureus (ATCC 22923), Streptococcus pyogenes (ATCC 29436), Pseudomonas aeruginosa (ATCC 13048), Klebsiella pneumoniae (ATCC 700603), Escherichia coli (ATCC 22922) with MIC ranging between 7.8 ug/mL to 250 μg/mL. The antioxidant activity of selected essential oils was determined by antioxidant assays which were 1,1-Diphenyl-2-picrylhydrazyl assay (DPPH), determination of ferric reducing antioxidant power assay (FRAP) and β-Carotene/linoleic acid bleaching assay. Backhousia citriodora and Laurus nobilis showed the highest antioxidant activity.
    n-Octanal and β-Selinene were identified to be the major components with peak area of 26.37 % and 13.92 % respectively in secondary metabolites analysis by Gas Chromatography-Mass Spectrometry (GCMS).
    Matched MeSH terms: Oils, Volatile
  3. Abdul Aziz NU, Chiroma SM, Mohd Moklas MA, Adenan MI, Ismail A, Hidayat Baharuldin MT
    Brain Sci, 2020 Oct 13;10(10).
    PMID: 33066310 DOI: 10.3390/brainsci10100733
    Pathophysiology of postpartum depression (PPD) has been associated with many factors, such as neuroendocrine, neuroinflammation and neurotransmitter changes. Fish oil (FO) improves PPD both in humans and animals. However, little is known with regards to its pharmacology on a PPD-like rat model. Hence, the current study aimed at investigating the effects of FO on a PPD-like rat model. Female rats were induced with PPD-like symptoms and then randomly divided into six groups (n = 6) for two experimental protocols. Protocol 1 consisted of PPD-like rats (2 mL distilled water), PPD-like + FO (9 g/kg/d) and PPD-like + Fluoxetine (FLX) (15 mg/kg/d) groups of rats, whereas Protocol 2 consisted of PPD-like rats (2 mL distilled water) + PCPA (p-chlorophenylalanine) 150 mg/kg, PPD-like + FO (9 g/kg/d) + PCPA 150 mg/kg and PPD-like + FLX (15 mg/d) + PCPA 150 mg/kg groups of rats, respectively. All treatments were administered orally for 10 days postpartum, except PCPA, which was given intraperitoneally. Prior to euthanasia, the antidepressant-like effect of the FO was evaluated using the forced swimming test (FST) and open field test (OFT) on day 10 postpartum. Biochemical analysis of serotonin, serotonin metabolite and serotonin turnover from their prefrontal cortex and hippocampus were also measured. The results showed that FO decreased immobility time and increased swimming time significantly, but not climbing time in FST. Further, it also decreased serotonin metabolite and turnover significantly in the hippocampus of the PPD-like rats. In contrast, administration with PCPA reversed all the outcomes. The antidepressant-like effects of FO were found to be similar with that of FLX. Thus, it can be concluded that FO exerts its antidepressant-like effects in PPD-like rats through modulation of serotonergic system.
    Matched MeSH terms: Fish Oils
  4. Goh EML, Tan LC, Chow SK, Teh LK, Yeap SS
    DOI: 10.1046/j.0219-0494.2003.00021.x
    Aim: To determine the prevalence of the use of complementary medicine in patients with systemic lupus erythematosus (SLE)., Method: A prospective survey was conducted of 132 patients using a standard questionnaire., Results: Of the 132 patients, 15.2% were on alternative therapy and 56.7% were taking food supplements. The common types of alternative therapy taken were oral traditional herbs (50%) and noni juice (20%). Vitamin C, calcium, vitamin E, vitamin B, Spirulina, evening primrose oil, fish oil and multivitamins were the commonest food supplements. There was no significant relationships between taking alternative treatment and educational level (P = 0.16), income (P = 0.05) or race (P = 0.42) of the patients. The majority of these patients took these therapies or supplements for up to 1 year. Up to 70% of the patients had not consulted a doctor before taking these therapies, with immediate family members and friends being the main sources of recommendation. The majority of patients spent RM50-RM500 (US$13-US$132) for 2 months' supply of medications. In conclusion, 15.2% of SLE patients in our study were on alternative therapy and 57.6% on food supplements., Conclusion: Physicians should be aware of these practices which should be taken into account during the history-taking and subsequent management of the patients.
    Matched MeSH terms: Fish Oils
  5. Zulkiply SH, Balasubramaniam V, Abu Bakar NA, Abd Rashed A, Ismail SR
    PLoS One, 2019;14(8):e0220877.
    PMID: 31415611 DOI: 10.1371/journal.pone.0220877
    INTRODUCTION: Vegetable oil is an important source of fatty acids, and as palm oil being the highest consumed vegetable oil in many countries, its high saturated fatty acid content has led many concerns on cardiometabolic health. Dietary fatty acids has also been linked to affect glucose metabolism and insulin sensitivity. This systematic review is aimed at critically evaluating the available evidence on the association of palm oil with the biomarkers of glucose metabolism as compared to other vegetable oils.

    METHODS: We systemically searched PubMed, CENTRAL and Scopus up to June 2018. We searched for published interventional studies on biomarkers of glucose metabolism (defined as fasting glucose, fasting insulin, HOMA, 2-hour post prandial glucose and HbA1C) that compared palm oil- or palm olein-rich diets with other edible vegetable oils (such as olive oil, canola oil and soybean oil). Two reviewers independently extracted data and assessed study risks of bias. Mean differences of outcomes were pooled for the meta-analysis.

    RESULTS: We identified 1921 potentially eligible articles with only eight included studies. Seven randomised cross-over trials and one parallel trial were included. Study population were among young to middle-aged, healthy, non-diabetic, and normal weight participants. Intervention duration ranged from three to seven weeks, and fat substitution ranged from 15% to 20% energy. There were insignificant differences in fasting glucose when compared to partially hydrogenated soybean oil [-0.15mmol/L (-0.46,0.16) P = 0.33, I2 = 48%], soybean oil [0.05mmol/L (-0.09,0.18) P = 0.49, I2 = 0%] and olive oil [0.04mmol/L (-0.09,0.17) P = 0.76, I2 = 0%]. Insignificant effects were also seen on fasting insulin when compared to partially hydrogenated soybean oil [1.72pmol/L (-11.39,14.84) P = 0.80, I2 = 12%] and olive oil diet [-0.14pmol/L (-4.87,4.59) P = 0.95, I2 = 0%].

    CONCLUSION: Current evidence on the effects of palm oil consumption on biomarkers of glucose metabolism is poor and limited to only healthy participants. We conclude that little or no additional benefit will be obtained by replacing palm oil with other oils rich in mono or polyunsaturated fatty acids for changes in glucose metabolism.

    Matched MeSH terms: Plant Oils
  6. Olujobi OJ
    Heliyon, 2021 Feb;7(2):e06123.
    PMID: 33659729 DOI: 10.1016/j.heliyon.2021.e06123
    Insolvency and business recovery laws in Nigeria have not evolved to incorporate reorganisation, reforming insolvent oil firms' operations to boost commercial oil firms' steadiness and economic suitability like other moderately developed countries. In Nigeria, liquidation is understood by many as the panacea to indebtedness. The research evaluates the Nigerian insolvency and business recovery legal regime to sustain indebted oil firms from economic shocks due to the global decline in the oil price to avert imminent business failures due to insufficient cash flows. The aim is to fill the gaps in Nigeria's insolvency and business recovery laws by recommending a model for the sustenance of oil firms and to suggest the reform of the gaps identified in the existing laws and the extant literature on the subject. The paper opted for conceptual legal review, comparative legal and policies analyses of solvency and business recovery legislations in Nigeria, Malaysia, India, South Africa, the United Kingdom and the United States. These nations were designated for this study because their insolvency and business recovery legal regime are business rescued driven, not winding up centred. The study is library research-based to address some of the flaws in Nigeria's insolvency and business recovery laws. The study finds that Nigerian legislation on insolvency is flawed in oil firms' salvage, improvement and rearrangement. It ends that, statutory bodies in the designated case study nations are efficient than those in Nigeria due to the strong political will of their governments in supporting insolvent oil firms for successful financial recovery, to safeguard jobs, to protect creditors and to enhance the wealth of their nations through sound business recovery policies and laws. The study, advocates, remodel of Nigeria's insolvency and business recovery legislations and policies in compliance with the international standards on insolvent oil firms salvaged and creditors focused policies for a robust economy. The study concludes with the recommendation for further study to consider quantitative analysis research methodology to project further scholarship on the subject.
    Matched MeSH terms: Industrial Oils
  7. Misni N, Nor ZM, Ahmad R
    J Am Mosq Control Assoc, 2016 Jun;32(2):117-23.
    PMID: 27280349 DOI: 10.2987/moco-32-02-117-123.1
    Based on an ethnobotanical study on use for plant species against mosquito bites in the Kota Tinggi District, Johor State, Malaysia, 3 plants selected for study, Citrus aurantifolia (leaves), Citrus grandis (fruit peel), and Alpinia galanga (rhizome), were extracted using hydrodistillation to produce essential oils. These essential oils were then formulated as a lotion using a microencapsulation process and then tested for their repellent effect against Aedes aegypti. N,N-diethyl-m-toluamide (deet) was also prepared in the same formulation and tested for repellency as controls. Four commercial plant-based repellent (KAPS(®), MozAway(®), BioZ Natural(®), and Mosiquard(®)) also were incorporated in the bioassay for comparison purposes. Bioassays revealed that at 20% concentration all repellent formulations demonstrated complete protection for 2 h and >90% for 4 h post-application. The A. galanga-based formulation provided the greatest level of protection (98.91%), which extended for 4 h post-application and was not significantly different from deet at similar concentration. When compared with commercial plant-based repellents (KAPS(®), MozAway(®), and BioZ Natural(®)), the 3 lotion formulations showed significantly better protection against Ae. aegypti bites, providing >90% protection for 4 h. In conclusion, our 3 plant-based lotion formulations provided acceptable levels of protection against host-seeking Ae. aegypti and should be developed.
    Matched MeSH terms: Oils, Volatile
  8. Nuraznee Mashodi, Nurul Yani Rahim, Norhayati Muhammad, Saliza Asman
    MyJurnal
    Extra virgin olive oil (EVOO) is categorized as expensive oil due to high-quality nutritional value. Unfortunately, EVOO is easily adulterated with other low-quality edible oils. Therefore, this study was done to differentiate and analyze the adulteration of EVOO with other edible oils using Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spectroscopy. The study was used several edible oils included canola oil, corn oil, sunflower oil, and soybean oil as an adulterant for EVOO. The adulterant EVOO samples were prepared by mixing with dissimilar concentrations of the solely edible oils (20 %, 40 %, 60 % and 80 % (v/v)). The main functional groups of EVOO and other edible oils are O-H, C-H, C=C and C=O groups were assigned around 3500 cm-1, 2925 cm-1, 3006 cm-1 and 1745 cm-1 wavenumbers, respectively. From the comparison of EVOO and other adulterant edibles oil spectra, it showed that the EVOO has the lowest absorbance intensity at around 3006 cm-1 represented double bond which is closely related to the composition of oil sample. The adulteration of EVOO was evaluated by analysing the changes in the absorbance based on the linear regression analysis graph of the bands at 3006 and 2925 cm-1 and the limit of detection (LOD) was measured. The graph of A3008/A2925 with good relative coefficients (R2) and lower LOD is more favourable than the linear regression graph of A3006 versus percentage of edible oils added in EVOO. This study showed that ATR-FTIR spectroscopy is a convenient tool for analysing the adulteration of EVOO.
    Matched MeSH terms: Plant Oils
  9. Zadeh-Ardabili PM, Rad SK
    Biotechnol Rep (Amst), 2019 Jun;22:e00341.
    PMID: 31061816 DOI: 10.1016/j.btre.2019.e00341
    Although inflammation is a reactive to injurious stimuli and considered as beneficial process in body, but it causes some discomforts, such as pain. Murine dietary contains appreciable amounts of fatty acids and antioxidants which encourages researchers to focus on their potential therapeutic effects. This study is aimed to examine the analgesic and anti-inflammatory activity of Neptune krill oil (NKO) and fish oil (FO) in rodent model which are two well-known sources of rich content of n-3 polyunsaturated fatty acids (n-3 PUFAs), mostly eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA). NKO and FO were used at the same dose of 500 mg and also balanced at similar doses of EPA: 12 in NKO vs. 12 in FO wt%, DHA: 7 NKO vs. 8 FO wt%. Application of NKO and FO in acetic acid-induced writhing effect, hot plate, and formalin induced test, indicated the nociceptive activity of the two tested drugs in comparison with normal saline. Also, the anti-inflammatory effect of these supplements was confirmed by carrageenan test. Analysis of cytokines levels in the blood samples of the mice after induction inflammation by carrageenan indicated decreased levels of those proteins compared to that in the normal groups. Both tested drugs, effectively could reduce severe inflammation and pain in rodents in comparison with the references drugs (depends on the tests); however, NKO was found to be more effective.
    Matched MeSH terms: Fish Oils
  10. Saalah S, Abdullah LC, Aung MM, Salleh MZ, Awang Biak DR, Basri M, et al.
    Polymers (Basel), 2021 Mar 05;13(5).
    PMID: 33807622 DOI: 10.3390/polym13050795
    Nowadays, there is a significant trend away from solvent-based polyurethane systems towards waterborne polyurethane dispersions due to government regulations requiring manufacturers to lower total volatile organic compounds, as well as consumer preference for more environmentally friendly products. In this work, a renewable vegetable oil-based polyol derived from jatropha oil was polymerized with isophorone diisocyanate and dimethylol propionic acid to produce anionic waterborne polyurethane dispersion. Free standing films with up to 62 wt.% bio-based content were successfully produced after evaporation of water from the jatropha oil-based waterborne polyurethane (JPU) dispersion, which indicated good film formation. The chemical and thermo-mechanical properties of the JPU films were characterized. By increasing the OH numbers of polyol from 161 mgKOH/g to 217 mgKOH/g, the crosslinking density of the JPU was significantly increased, which lead to a better storage modulus and improved hydrophobicity. Overall, JPU produced from polyol having OH number of 217 mgKOH/g appears to be a promising product for application as a binder for wood and decorative coatings.
    Matched MeSH terms: Plant Oils
  11. Mohamad NA, Azis N, Jasni J, Kadir MZAA, Yunus R, Yaakub Z
    Nanomaterials (Basel), 2021 Mar 19;11(3).
    PMID: 33808641 DOI: 10.3390/nano11030786
    This experimental study aims to examine the partial discharge (PD) properties of palm oil and coconut oil (CO) based aluminum oxide (Al2O3) nanofluids with and without surfactants. The type of surfactant used in this study was sodium dodecyl sulfate (SDS). The volume concentrations range of Al2O3 dispersed in oil samples was varied from 0.001% to 0.05%. The ratio of surfactants to nanoparticles was set to 1:2. In total, two different types of refined, bleached and deodorized palm oil (RBDPO) and one type of CO were measured for PD. Mineral oil (MO) was also examined for comparison purpose. PDIV measurements for all samples were carried out based on rising voltage method whereby a needle-sphere electrode configuration with a gap distance of 50 mm was chosen in this study. Al2O3 improves the PDIVs of RBDPO, CO and MO whereby the highest improvements of PDIVs are 34%, 39.3% and 27%. The PD amplitude and repetition rate of RBDPO improve by 38% and 81% while for CO, it can increase up to 65% and 80% respectively. The improvement of PD amplitude and repetition rate for MO are 18% and 95%, regardless with and without SDS. Without SDS, the presence of Al2O3 could cause 26%, 75% and 65% reductions of the average emission of light signals for RBDPOA, RBDPOB and CO with the improvement of PD characteristics but both events do not correlate at the same volume concentration of Al2O3. On the other hand, the average emission of light signal levels of the oils increases with the introduction of SDS. The emission of light signal in MO does not correlate with the PD characteristics improvement either with or without SDS.
    Matched MeSH terms: Oils
  12. Yasmin F, Tamrin KF, Sheikh NA, Barroy P, Yassin A, Khan AA, et al.
    Materials (Basel), 2021 Mar 09;14(5).
    PMID: 33803364 DOI: 10.3390/ma14051311
    Laser-assisted high speed milling is a subtractive machining method that employs a laser to thermally soften a difficult-to-cut material's surface in order to enhance machinability at a high material removal rate with improved surface finish and tool life. However, this machining with high speed leads to high friction between workpiece and tool, and can result in high temperatures, impairing the surface quality. Use of conventional cutting fluid may not effectively control the heat generation. Besides, vegetable-based cutting fluids are invariably a major source of food insecurity of edible oils which is traditionally used as a staple food in many countries. Thus, the primary objective of this study is to experimentally investigate the effects of water-soluble sago starch-based cutting fluid on surface roughness and tool's flank wear using response surface methodology (RSM) while machining of 316 stainless steel. In order to observe the comparison, the experiments with same machining parameters are conducted with conventional cutting fluid. The prepared water-soluble sago starch based cutting fluid showed excellent cooling and lubricating performance. Therefore, in comparison to the machining using conventional cutting fluid, a decrease of 48.23% in surface roughness and 38.41% in flank wear were noted using presented approach. Furthermore, using the extreme learning machine (ELM), the obtained data is modeled to predict surface roughness and flank wear and showed good agreement between observations and predictions.
    Matched MeSH terms: Plant Oils
  13. Nurul Fatihah Mohamed Yusoff, Basma Ezzat Mustafa, Pram Kumar Subramaniam, Nazih Shaban Mustafa, Muhannad Ali Kashmoola, Khairani Idah Mokhtar, et al.
    MyJurnal
    Introduction:Linum usitatissimum (flax seed) has been cultivated for domestic use since prehistoric times. Its use as a dietary supplement becomes more popular nowadays. Nigella sativa seeds and oils have been widely used for centuries in the treatment of various ailments throughout the world. It is an important drug in the Indian traditional system of medicine like Unani and Ayurveda. Methods: This is a laboratory experimental in-vitro study using select-ed oral pathogens (Streptococcus mutans, Klebsiella pneumoniae and Pseudomonas aeruginosa) cultured in nutrient agar. The pathogens were then inoculated in nutrient based broth and incubation for 24hours. Linum usitatissimum and Nigella sativa extract efficacy was tested by measurement of the zone of inhibition. The result of the extracts antimicrobial activities were compared with positive control (penicillin) and negative control(Dimethyl sulfoxide DMSO). The statistical analysis was done by using SPSS18. Results: The antibacterial effect of Linum usitatissimum and Nigella sativa extract is comparable to the effect of penicillin and this study shows that flax seed extract shows more potent antibacterial effect than Nigella sativa on Streptococcus mutans and Pseudomonas aeruginosa while both extracts didn’t show an effect on Klebsiella pneumoniae. Conclusion: The results of the present study scien-tifically validate the inhibitory capacity of Linum usitatissimum or Nigella sativa as antibiotic against selective oral pathogens this will contribute towards the development of new treatment options based on natural base products.
    Matched MeSH terms: Plant Oils
  14. Syafiq R, Sapuan SM, Zuhri MYM, Ilyas RA, Nazrin A, Sherwani SFK, et al.
    Polymers (Basel), 2020 Oct 19;12(10).
    PMID: 33086533 DOI: 10.3390/polym12102403
    Recently, many scientists and polymer engineers have been working on eco-friendly materials for starch-based food packaging purposes, which are based on biopolymers, due to the health and environmental issues caused by the non-biodegradable food packaging. However, to maintain food freshness and quality, it is necessary to choose the correct materials and packaging technologies. On the other hand, the starch-based film's biggest flaws are high permeability to water vapor transfer and the ease of spoilage by bacteria and fungi. One of the several possibilities that are being extensively studied is the incorporation of essential oils (EOs) into the packaging material. The EOs used in food packaging films actively prevent inhibition of bacteria and fungi and have a positive effect on food storage. This work intended to present their mechanical and barrier properties, as well as the antimicrobial activity of anti-microbacterial agent reinforced starch composites for extending product shelf life. A better inhibition of zone of antimicrobial activity was observed with higher content of essential oil. Besides that, the mechanical properties of starch-based polymer was slightly decreased for tensile strength as the increasing of essential oil while elongation at break was increased. The increasing of essential oil would cause the reduction of the cohesion forces of polymer chain, creating heterogeneous matrix and subsequently lowering the tensile strength and increasing the elongation (E%) of the films. The present review demonstrated that the use of essential oil represents an interesting alternative for the production of active packaging and for the development of eco-friendly technologies.
    Matched MeSH terms: Oils, Volatile
  15. Kamarudin SH, Abdullah LC, Aung MM, Ratnam CT
    Polymers (Basel), 2020 Nov 06;12(11).
    PMID: 33171889 DOI: 10.3390/polym12112604
    New environmentally friendly plasticized poly(lactic acid) (PLA) kenaf biocomposites were obtained through a melt blending process from a combination of epoxidized jatropha oil, a type of nonedible vegetable oil material, and renewable plasticizer. The main objective of this study is to investigate the effect of the incorporation of epoxidized jatropha oil (EJO) as a plasticizer and alkaline treatment of kenaf fiber on the thermal properties of PLA/Kenaf/EJO biocomposites. Kenaf fiber was treated with 6% sodium hydroxide (NaOH) solution for 4 h. The thermal properties of the biocomposites were analyzed using a differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). It must be highlighted that the addition of EJO resulted in a decrease of glass transition temperature which aided PLA chain mobility in the blend as predicted. TGA demonstrated that the presence of treated kenaf fiber together with EJO in the blends reduced the rate of decomposition of PLA and enhanced the thermal stability of the blend. The treatment showed a rougher surface fiber in scanning electron microscopy (SEM) micrographs and had a greater mechanical locking with matrix, and this was further supported with Fourier-transform infrared spectroscopy (FTIR) analysis. Overall, the increasing content of EJO as a plasticizer has improved the thermal properties of PLA/Kenaf/EJO biocomposites.
    Matched MeSH terms: Plant Oils
  16. Lyn CW, Bashir MJ, Wong LY, Lim JW, Sethupathi S, Ng CA
    Chemosphere, 2020 Nov 25.
    PMID: 33276996 DOI: 10.1016/j.chemosphere.2020.129050
    Domestic wastewater has been generated massively along with rapid growth of population and economic. Biological treatment using sequencing batch reactor (SBR) augmented with palm oil fuel ash (POFA) was investigated for the first time. The performance of POFA in enhancing biological treatment of wastewater has not been tested. The porosity property of POFA can improve SBR efficiency by promoting growth of mixed liquor suspended solids (MLSS) and formation of larger flocs for settling and facilitating attachment of microorganisms and pollutants onto POFA surfaces. The properties of POFA were tested to identify morphological properties, particle size, surface area, chemical compositions. Four SBRs, namely SBR1, SBR2, SBR3 and SBR4 were provided with aeration rate of 1, 2, 3 and 4 L/min, respectively. Each reactor was augmented with different dosages of POFA. Optimum aeration rate and POFA concentration were identified by the performance of SBRs in removing chemical oxygen demand (COD), ammoniacal nitrogen (NH3-N) and colour from domestic wastewater. The results showed the most efficient COD (97.8%), NH3-N (99.4%) and colour (98.8%) removals were achieved at optimum POFA concentration of 4 g/L in SBR and aeration rate of 1 L/min. The study also found that higher aeration rate would contribute to the smaller specific size of flocs and decrease the pollutant removal efficiency.
    Matched MeSH terms: Fuel Oils
  17. Singh AK, Hakimi MH, Kumar A, Ahmed A, Abidin NSZ, Kinawy M, et al.
    Sci Rep, 2020 12 17;10(1):22108.
    PMID: 33335176 DOI: 10.1038/s41598-020-78906-x
    A high bituminous shale horizon from the Gurha mine in the Bikaner sub-basin of the Rajasthan District, NW India, was studied using a collection of geochemical and petrological techniques. This study investigated the nature and environmental conditions of the organic matter and its relation to the unconventional oil-shale resources of the bituminous shale. The analyzed shales have high total organic carbon and total sulfur contents, suggesting that these shale sediments were deposited in a paralic environment under reducing conditions. The dominant presence of organic matter derived from phytoplankton algae suggests warm climatic marine environment, with little connection to freshwater enhancing the growth of algae and other microorganisms. The analyzed bituminous shales have high aquatic-derived alginite organic matters, with low Pr/Ph, Pr/n-C17, and Ph/n-C18 ratios. It is classified as Type II oil-prone kerogen, consistent with high hydrogen index value. Considering the maturity indicators of geochemical Tmax (
    Matched MeSH terms: Industrial Oils
  18. Reza MS, Ahmed A, Caesarendra W, Abu Bakar MS, Shams S, Saidur R, et al.
    Bioengineering (Basel), 2019 Apr 16;6(2).
    PMID: 30995765 DOI: 10.3390/bioengineering6020033
    To evaluate the possibilities for biofuel and bioenergy production Acacia Holosericea, which is an invasive plant available in Brunei Darussalam, was investigated. Proximate analysis of Acacia Holosericea shows that the moisture content, volatile matters, fixed carbon, and ash contents were 9.56%, 65.12%, 21.21%, and 3.91%, respectively. Ultimate analysis shows carbon, hydrogen, and nitrogen as 44.03%, 5.67%, and 0.25%, respectively. The thermogravimetric analysis (TGA) results have shown that maximum weight loss occurred for this biomass at 357 °C for pyrolysis and 287 °C for combustion conditions. Low moisture content (<10%), high hydrogen content, and higher heating value (about 18.13 MJ/kg) makes this species a potential biomass. The production of bio-char, bio-oil, and biogas from Acacia Holosericea was found 34.45%, 32.56%, 33.09% for 500 °C with a heating rate 5 °C/min and 25.81%, 37.61%, 36.58% with a heating rate 10 °C/min, respectively, in this research. From Fourier transform infrared (FTIR) spectroscopy it was shown that a strong C-H, C-O, and C=C bond exists in the bio-char of the sample.
    Matched MeSH terms: Plant Oils
  19. Jaganathan SK, Mani MP, Ismail AF, Ayyar M
    Polymers (Basel), 2017 May 04;9(5).
    PMID: 30970842 DOI: 10.3390/polym9050163
    The objective of this work is to characterize and investigate the blood compatibility of polyurethane (PU)/mustard oil composites fabricated using electrospinning technique. The fabricated scaffold was characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), thermogravimetric analysis (TGA) and contact angle measurements. The activated partial thromboplastin time (APPT), prothrombin time (PT) and the hemolytic assay were done to investigate the blood compatibility of the developed composites. The SEM results revealed that the fiber diameter of the composites (761 ± 123 nm) was reduced compared to pristine PU control. The interaction between PU and mustard oil was confirmed by FTIR as evident through the shifting of peaks. The fabricated composites depicted hydrophobic behavior as insinuated by the increase in contact angle measurements. PU/mustard composites displayed improved crystallinity as confirmed by TGA. Atomic force micrographs suggested that developed PU/mustard oil composites showed an increase in the surface roughness (Ra) compared to pure PU. The Ra of pure PU was observed to be 723 nm but for the fabricated PU/mustard oil composite the Ra was found to be 1298 nm (Ra). The hemolytic index value for pure PU and fabricated composites was observed to be 2.73% and 1.15% indicating that developed composites showed a non-hemolytic behavior signifying the safety of the composites with red blood cells. Hence the newly developed composites with improved physicochemical and blood compatibility properties may be considered as a potential candidate for fabricating cardiac patches and grafts.
    Matched MeSH terms: Plant Oils
  20. Ong AL, Teh CK, Kwong QB, Tangaya P, Appleton DR, Massawe F, et al.
    Sci Rep, 2019 04 29;9(1):6619.
    PMID: 31036825 DOI: 10.1038/s41598-019-42989-y
    Meiotic crossovers in outbred species, such as oil palm (Elaeis guineensis Jacq., 2n = 32) contribute to allelic re-assortment in the genome. Such genetic variation is usually exploited in breeding to combine positive alleles for trait superiority. A good quality reference genome is essential for identifying the genetic factors underlying traits of interest through linkage or association studies. At the moment, an AVROS pisifera genome is publicly available for oil palm. Distribution and frequency of crossovers throughout chromosomes in different origins of oil palm are still unclear. Hence, an ultrahigh-density genomic linkage map of a commercial Deli dura x AVROS pisifera family was constructed using the OP200K SNP array, to evaluate the genetic alignment with the genome assembly. A total of 27,890 linked SNP markers generated a total map length of 1,151.7 cM and an average mapping interval of 0.04 cM. Nineteen linkage groups represented 16 pseudo-chromosomes of oil palm, with 61.7% of the mapped SNPs present in the published genome. Meanwhile, the physical map was also successfully extended from 658 Mb to 969 Mb by assigning unplaced scaffolds to the pseudo-chromosomes. A genic linkage map with major representation of sugar and lipid biosynthesis pathways was subsequently built for future studies on oil related quantitative trait loci (QTL). This study improves the current physical genome of the commercial oil palm, and provides important insights into its recombination landscape, eventually unlocking the full potential genome sequence-enabled biology for oil palm.
    Matched MeSH terms: Industrial Oils
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links