Displaying publications 61 - 80 of 279 in total

Abstract:
Sort:
  1. Sirunyan AM, Tumasyan A, Adam W, Asilar E, Bergauer T, Brandstetter J, et al.
    Eur Phys J C Part Fields, 2017;77(12):845.
    PMID: 31985736 DOI: 10.1140/epjc/s10052-017-5317-4
    A search is presented for an excess of events with heavy-flavor quark pairs (

    t

    t
    ¯


    and

    b

    b
    ¯


    ) and a large imbalance in transverse momentum in data from proton-proton collisions at a center-of-mass energy of 13


    TeV

    . The data correspond to an integrated luminosity of 2.2



    fb

    -
    1



    collected with the CMS detector at the CERN LHC. No deviations are observed with respect to standard model predictions. The results are used in the first interpretation of dark matter production in

    t

    t
    ¯


    and

    b

    b
    ¯


    final states in a simplified model. This analysis is also the first to perform a statistical combination of searches for dark matter produced with different heavy-flavor final states. The combination provides exclusions that are stronger than those achieved with individual heavy-flavor final states.
    Matched MeSH terms: Motion
  2. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Bergauer T, Brandstetter J, et al.
    Phys Rev Lett, 2020 May 22;124(20):202001.
    PMID: 32501048 DOI: 10.1103/PhysRevLett.124.202001
    A measurement is reported of the jet mass distribution in hadronic decays of boosted top quarks produced in pp collisions at sqrt[s]=13  TeV. The data were collected with the CMS detector at the LHC and correspond to an integrated luminosity of 35.9  fb^{-1}. The measurement is performed in the lepton+jets channel of tt[over ¯] events, where the lepton is an electron or muon. The products of the hadronic top quark decay t→bW→bqq[over ¯]^{'} are reconstructed as a single jet with transverse momentum larger than 400 GeV. The tt[over ¯] cross section as a function of the jet mass is unfolded at the particle level and used to extract a value of the top quark mass of 172.6±2.5  GeV. A novel jet reconstruction technique is used for the first time at the LHC, which improves the precision by a factor of 3 relative to an earlier measurement. This highlights the potential of measurements using boosted top quarks, where the new technique will enable future precision measurements.
    Matched MeSH terms: Motion
  3. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Bergauer T, Dragicevic M, et al.
    Phys Rev Lett, 2020 Apr 24;124(16):162002.
    PMID: 32383915 DOI: 10.1103/PhysRevLett.124.162002
    The polarizations of promptly produced χ_{c1} and χ_{c2} mesons are studied using data collected by the CMS experiment at the LHC, in proton-proton collisions at sqrt[s]=8  TeV. The χ_{c} states are reconstructed via their radiative decays χ_{c}→J/ψγ, with the photons being measured through conversions to e^{+}e^{-}, which allows the two states to be well resolved. The polarizations are measured in the helicity frame, through the analysis of the χ_{c2} to χ_{c1} yield ratio as a function of the polar or azimuthal angle of the positive muon emitted in the J/ψ→μ^{+}μ^{-} decay, in three bins of J/ψ transverse momentum. While no differences are seen between the two states in terms of azimuthal decay angle distributions, they are observed to have significantly different polar anisotropies. The measurement favors a scenario where at least one of the two states is strongly polarized along the helicity quantization axis, in agreement with nonrelativistic quantum chromodynamics predictions. This is the first measurement of significantly polarized quarkonia produced at high transverse momentum.
    Matched MeSH terms: Motion
  4. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Phys Rev Lett, 2017 Sep 15;119(11):111802.
    PMID: 28949210 DOI: 10.1103/PhysRevLett.119.111802
    A search is reported for a narrow vector resonance decaying to quark-antiquark pairs in proton-proton collisions at sqrt[s]=13  TeV, collected with the CMS detector at the LHC. The data sample corresponds to an integrated luminosity of 2.7   fb^{-1}. The vector resonance is produced at large transverse momenta, with its decay products merged into a single jet. The resulting signature is a peak over background in the distribution of the invariant mass of the jet. The results are interpreted in the framework of a leptophobic vector resonance and no evidence is found for such particles in the mass range of 100-300 GeV. Upper limits at 95% confidence level on the production cross section are presented in a region of mass-coupling phase space previously unexplored at the LHC. The region below 140 GeV has not been explored by any previous experiments.
    Matched MeSH terms: Motion
  5. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Phys Rev Lett, 2017 Oct 13;119(15):151802.
    PMID: 29077436 DOI: 10.1103/PhysRevLett.119.151802
    Results are reported from a search for supersymmetric particles in proton-proton collisions in the final state with a single lepton, multiple jets, including at least one b-tagged jet, and large missing transverse momentum. The search uses a sample of proton-proton collision data at sqrt[s]=13  TeV recorded by the CMS experiment at the LHC, corresponding to an integrated luminosity of 35.9  fb^{-1}. The observed event yields in the signal regions are consistent with those expected from standard model backgrounds. The results are interpreted in the context of simplified models of supersymmetry involving gluino pair production, with gluino decay into either on- or off-mass-shell top squarks. Assuming that the top squarks decay into a top quark plus a stable, weakly interacting neutralino, scenarios with gluino masses up to about 1.9 TeV are excluded at 95% confidence level for neutralino masses up to about 1 TeV.
    Matched MeSH terms: Motion
  6. Sirunyan AM, Tumasyan A, Adam W, Asilar E, Bergauer T, Brandstetter J, et al.
    Phys Rev Lett, 2017 Oct 13;119(15):152301.
    PMID: 29077459 DOI: 10.1103/PhysRevLett.119.152301
    The differential production cross sections of B^{±} mesons are measured via the exclusive decay channels B^{±}→J/ψK^{±}→μ^{+}μ^{-}K^{±} as a function of transverse momentum in pp and Pb-Pb collisions at a center-of-mass energy sqrt[s_{NN}]=5.02  TeV per nucleon pair with the CMS detector at the LHC. The pp(Pb-Pb) data set used for this analysis corresponds to an integrated luminosity of 28.0  pb^{-1} (351  μb^{-1}). The measurement is performed in the B^{±} meson transverse momentum range of 7 to 50  GeV/c, in the rapidity interval |y|<2.4. In this kinematic range, a strong suppression of the production cross section by about a factor of 2 is observed in the Pb-Pb system in comparison to the expectation from pp reference data. These results are found to be roughly compatible with theoretical calculations incorporating beauty quark diffusion and energy loss in a quark-gluon plasma.
    Matched MeSH terms: Motion
  7. Sirunyan AM, Tumasyan A, Adam W, Asilar E, Bergauer T, Brandstetter J, et al.
    Phys Rev Lett, 2017 Oct 06;119(14):141802.
    PMID: 29053305 DOI: 10.1103/PhysRevLett.119.141802
    A search for charged Higgs bosons produced via vector boson fusion and decaying into W and Z bosons using proton-proton collisions at sqrt[s]=13  TeV is presented. The data sample corresponds to an integrated luminosity of 15.2  fb^{-1} collected with the CMS detector in 2015 and 2016. The event selection requires three leptons (electrons or muons), two jets with large pseudorapidity separation and high dijet mass, and missing transverse momentum. The observation agrees with the standard model prediction. Limits on the vector boson fusion production cross section times branching fraction for new charged physical states are reported as a function of mass from 200 to 2000 GeV and interpreted in the context of Higgs triplet models.
    Matched MeSH terms: Motion
  8. Sirunyan AM, Tumasyan A, Adam W, Asilar E, Bergauer T, Brandstetter J, et al.
    Phys Rev Lett, 2017 Aug 25;119(8):082301.
    PMID: 28952777 DOI: 10.1103/PhysRevLett.119.082301
    The production of jets in association with Z bosons, reconstructed via the μ^{+}μ^{-} and e^{+}e^{-} decay channels, is studied in pp and, for the first time, in Pb-Pb collisions. Both data samples were collected by the CMS experiment at the LHC, at a nucleon-nucleon center-of-mass energy of 5.02 TeV. The Pb-Pb collisions were analyzed in the 0%-30% centrality range. The back-to-back azimuthal alignment was studied in both pp and Pb-Pb collisions for Z bosons with transverse momentum p_{T}^{Z}>60  GeV/c and a recoiling jet with p_{T}^{jet}>30  GeV/c. The p_{T} imbalance x_{jZ}=p_{T}^{jet}/p_{T}^{Z}, as well as the average number of jet partners per Z, R_{jZ}, was studied in intervals of p_{T}^{Z}. The R_{jZ} is found to be smaller in Pb-Pb than in pp collisions, which suggests that in Pb-Pb collisions a larger fraction of partons associated with the Z bosons fall below the 30  GeV/c p_{T}^{jet} threshold because they lose energy.
    Matched MeSH terms: Motion
  9. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Phys Rev Lett, 2018 Feb 23;120(8):081801.
    PMID: 29542998 DOI: 10.1103/PhysRevLett.120.081801
    The first observation of electroweak production of same-sign W boson pairs in proton-proton collisions is reported. The data sample corresponds to an integrated luminosity of 35.9    fb^{-1} collected at a center-of-mass energy of 13 TeV with the CMS detector at the LHC. Events are selected by requiring exactly two leptons (electrons or muons) of the same charge, moderate missing transverse momentum, and two jets with a large rapidity separation and a large dijet mass. The observed significance of the signal is 5.5 standard deviations, where a significance of 5.7 standard deviations is expected based on the standard model. The ratio of measured event yields to that expected from the standard model at leading order is 0.90±0.22. A cross section measurement in a fiducial region is reported. Bounds are given on the structure of quartic vector boson interactions in the framework of dimension-8 effective field theory operators and on the production of doubly charged Higgs bosons.
    Matched MeSH terms: Motion
  10. Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Asilar E, Bergauer T, et al.
    Phys Rev Lett, 2018 Feb 16;120(7):071802.
    PMID: 29542941 DOI: 10.1103/PhysRevLett.120.071802
    An inclusive search for the standard model Higgs boson (H) produced with large transverse momentum (p_{T}) and decaying to a bottom quark-antiquark pair (bb[over ¯]) is performed using a data set of pp collisions at sqrt[s]=13  TeV collected with the CMS experiment at the LHC. The data sample corresponds to an integrated luminosity of 35.9  fb^{-1}. A highly Lorentz-boosted Higgs boson decaying to bb[over ¯] is reconstructed as a single, large radius jet, and it is identified using jet substructure and dedicated b tagging techniques. The method is validated with Z→bb[over ¯] decays. The Z→bb[over ¯] process is observed for the first time in the single-jet topology with a local significance of 5.1 standard deviations (5.8 expected). For a Higgs boson mass of 125 GeV, an excess of events above the expected background is observed (expected) with a local significance of 1.5 (0.7) standard deviations. The measured cross section times branching fraction for production via gluon fusion of H→bb[over ¯] with reconstructed p_{T}>450  GeV and in the pseudorapidity range -2.5
    Matched MeSH terms: Motion
  11. Siow WM, Chin PL, Chia SL, Lo NN, Yeo SJ
    Clin Orthop Relat Res, 2013 May;471(5):1451-7.
    PMID: 23299954 DOI: 10.1007/s11999-012-2776-7
    There is marked racial disparity in TKA use rates, demographics, and outcomes between white and Afro-Caribbean Americans. Comparative studies of ethnicity in patients undergoing TKAs have been mostly in American populations with an underrepresentation of Asian groups. It is unclear whether these disparities exist in Chinese, Malays, and Indians.
    Matched MeSH terms: Range of Motion, Articular
  12. Siong FT, Kim TW, Kim SC, Lee ES, Jaffar MSA, Lee YS
    J Arthroplasty, 2020 02;35(2):380-387.
    PMID: 31587980 DOI: 10.1016/j.arth.2019.09.005
    BACKGROUND: The aims of this study were to (1) describe our functional stepwise multiple needle puncturing (MNP) technique as the final step in medial ligament balancing during total knee arthroplasty (TKA) and (2) evaluate whether this technique can provide sufficient medial release with safety.

    METHODS: A total of 137 patients with 212 consecutive knees who underwent TKAs with or without functional stepwise MNP of superficial medial collateral ligament was recruited in this prospective cohort. Eighty-one patients with 129 knees who performed serial stress radiographs were enrolled in the final assessment. Superficial medial collateral ligament was punctured selectively (anteriorly or posteriorly or both) and sequentially depending on the site and degree of tightness. Mediolateral stability was assessed using serial stress radiographs and comparison was performed between the MNP and the non-MNP groups at postoperative 6 months and 1 year. Clinical outcomes were also evaluated between 2 groups.

    RESULTS: Fifty-five TKAs required additional stepwise MNP (anterior needling 19, posterior needling 3, both anterior and posterior needling 33). Preoperative hip-knee-ankle angle and the difference in varus-valgus stress angle showed significant difference between the MNP and the non-MNP groups, respectively (P = .009, P = .037). However, there was no significant difference when comparing the varus-valgus stress angle between the MNP and the non-MNP groups during serial assessment. Clinical outcomes including range of motion also showed no significant differences between the 2 groups.

    CONCLUSION: Functional medial ligament balancing with stepwise MNP can provide sufficient medial release with safety in TKA with varus aligned knee without clinical deterioration or complication such as instability.

    LEVEL OF EVIDENCE: Level II, Prospective cohort study.

    Matched MeSH terms: Range of Motion, Articular
  13. Singh N, Pandey CR, Tamang B, Singh R
    Malays Orthop J, 2020 Jul;14(2):64-71.
    PMID: 32983379 DOI: 10.5704/MOJ.2007.014
    Introduction: The study was conducted to evaluate the efficacy of arthroscopic debridement, microfracture and plasma rich in growth factor (PRGF) injection in the management of type V (Scranton) osteochondral lesions of talus and its role in healing the subchondral cyst and cessation of progression of ankle osteoarthritis.

    Material and Methods: This is a prospective case series conducted on patients who were diagnosed with type V osteochondral lesions of talus. All the cases were treated with arthroscopic debridement, microfracture, and PRGF injections. The patients were evaluated for the healing of subchondral cysts and progression of osteoarthritis with radiography (plain radiographs and computerised tomography Scan). Also, the patients' outcome was evaluated with Quadruple Visual Analogue Scale, Ankle Range of Motion, Foot and Ankle Disability Index, Foot and Ankle Outcome Instrument and a Satisfaction Questionnaire.

    Results: Five male patients underwent arthroscopic debridement, microfracture and PRGF injection for type V osteochondral lesion of talus. The mean age of patients was 27.4 years (19-47 years). All the patients gave history of minor twisting injury. Subchondral cyst healing was achieved in all patients by six months post-surgery. However, four out of five patients had developed early osteoarthritic changes of the ankle by their last follow-up [mean follow-up 29 months (ranged 15-36 months)]. Despite arthritic changes, all the patients reported 'Good' to 'Excellent' results on satisfaction questionnaire and Foot and Ankle Disability Index and could perform their day to day activities including sports.

    Conclusion: Arthroscopic debridement, microfracture, and PRGF causes healing of the subchondral cyst but does not cause cessation of progression to osteoarthritis of ankle in type V osteochondral defects of talus. However, despite progress to osteoarthritis, patient satisfaction post-procedure is good to excellent at short-term follow-up.

    Matched MeSH terms: Range of Motion, Articular
  14. Singh G, Makinde OD
    Sains Malaysiana, 2014;43:483-489.
    The paper is aimed at studying fluid flow heat transfer in the axisymmetric boundary layer flow of a viscous incompressible fluid, along the axial direction of a vertical stationary isothermal cylinder in presence of uniform free stream with momentum slip. The equations governing the flow i.e. continuity, momentum and energy equation are transformed into non-similar boundary layer equations and are solved numerically employing asymptotic series method with Shanks transformation. The numerical scheme involves the Runge-Kutta fourth order scheme along with the shooting technique. The flow is analyzed for both assisting and opposing buoyancy and the effect of different parameters on fluid velocity, temperature distribution, heat transfer and shear stress parameters is presented graphically.
    Matched MeSH terms: Motion
  15. Sibidanov A, Varvell KE, Adachi I, Aihara H, Al Said S, Asner DM, et al.
    Phys Rev Lett, 2018 Jul 20;121(3):031801.
    PMID: 30085771 DOI: 10.1103/PhysRevLett.121.031801
    We report the results of a search for the rare, purely leptonic decay B^{-}→μ^{-}ν[over ¯]_{μ} performed with a 711  fb^{-1} data sample that contains 772×10^{6}  BB[over ¯] pairs, collected near the ϒ(4S) resonance with the Belle detector at the KEKB asymmetric-energy e^{+}e^{-} collider. The signal events are selected based on the presence of a high momentum muon and the topology of the rest of the event showing properties of a generic B-meson decay, as well as the missing energy and momentum being consistent with the hypothesis of a neutrino from the signal decay. We find a 2.4 standard deviation excess above background including systematic uncertainties, which corresponds to a branching fraction of B(B^{-}→μ^{-}ν[over ¯]_{μ})=(6.46±2.22±1.60)×10^{-7} or a frequentist 90% confidence level interval on the B^{-}→μ^{-}ν[over ¯]_{μ} branching fraction of [2.9,10.7]×10^{-7}.
    Matched MeSH terms: Motion
  16. Siar CH, Tan BH
    J Oral Sci, 2000 Dec;42(4):205-10.
    PMID: 11269378
    The turnaround time (TAT) for oral biopsies received for histological examination by the Department of Oral Pathology, Oral Medicine and Periodontology, Faculty of Dentistry, University of Malaya, for the years 1978, 1988 and 1998 was evaluated. For the three years studied, TATs for 61, 233 and 463 specimens were retrospectively analysed. Testing intervals, that is, from the dates the surgeons procured the specimens, the laboratories accessioned them and until the pathologists signed off the diagnoses, were used to calculate TAT. The performance level of the respective pathologists, the growth of tissue diagnostic services and the possible variables that influence TAT were also evaluated. As prompt diagnosis means prompt treatment, which in turn has a bearing on prognosis, the TAT pertinent to oral malignant tumors was emphasized. The mean TAT, its mode and median fell significantly in 1998 compared with the previous 2 years; it was lower for soft tissue than for hard tissue specimens, and lower for malignant, than for non-malignant specimens. The progression of tissue diagnostic services is up to a satisfactory level, as 88.89 % of biopsies could render diagnoses within a fair period of time in 1998.
    Matched MeSH terms: Time and Motion Studies
  17. Shokravi H, Shokravi H, Bakhary N, Heidarrezaei M, Rahimian Koloor SS, Petrů M
    Sensors (Basel), 2020 Jun 19;20(12).
    PMID: 32575359 DOI: 10.3390/s20123460
    Bridges are designed to withstand different types of loads, including dead, live, environmental, and occasional loads during their service period. Moving vehicles are the main source of the applied live load on bridges. The applied load to highway bridges depends on several traffic parameters such as weight of vehicles, axle load, configuration of axles, position of vehicles on the bridge, number of vehicles, direction, and vehicle's speed. The estimation of traffic loadings on bridges are generally notional and, consequently, can be excessively conservative. Hence, accurate prediction of the in-service performance of a bridge structure is very desirable and great savings can be achieved through the accurate assessment of the applied traffic load in existing bridges. In this paper, a review is conducted on conventional vehicle-based health monitoring methods used for bridges. Vision-based, weigh in motion (WIM), bridge weigh in motion (BWIM), drive-by and vehicle bridge interaction (VBI)-based models are the methods that are generally used in the structural health monitoring (SHM) of bridges. The performance of vehicle-assisted methods is studied and suggestions for future work in this area are addressed, including alleviating the downsides of each approach to disentangle the complexities, and adopting intelligent and autonomous vehicle-assisted methods for health monitoring of bridges.
    Matched MeSH terms: Motion
  18. Sheykhi-Dolagh R, Saeedi H, Farahmand B, Kamyab M, Kamali M, Gholizadeh H, et al.
    Prosthet Orthot Int, 2015 Jun;39(3):190-6.
    PMID: 24604086 DOI: 10.1177/0309364614521652
    BACKGROUND: Flexible flat foot is described as a reduction in the height of the medial longitudinal arch and may occur from abnormal foot pronation. A foot orthosis is thought to modify and control excessive pronation and improve arch height.
    OBJECTIVE: To compare the immediate effect of three types of orthoses on foot mobility and the arch height index in subjects with flexible flat feet.
    STUDY DESIGN: A quasi-experimental study.
    METHOD: The dorsal arch height, midfoot width, foot mobility and arch height index were assessed in 20 participants with flexible flat feet (mean age = 23.2 ± 3 years) for three different foot orthosis conditions: soft, semi-rigid and rigid University of California Biomechanics Laboratory (UCBL).
    RESULTS: Maximum midfoot width at 90% with arch mobility in the coronal plane was shown in the semi-rigid orthosis condition. The semi-rigid orthosis resulted in the highest mean foot mobility in 90% of weight bearing, and the rigid orthosis (UCBL) had the lowest mean foot mobility. The soft orthosis resulted in foot mobility between that of the rigid and the semi-rigid orthosis. UCBL orthosis showed the highest arch height index, and the semi-rigid orthosis showed the lowest mean arch height index.
    CONCLUSION: Due to its rigid structure and long medial-lateral walls, the UCBL orthosis appears to limit foot mobility. Therefore, it is necessary to make an orthosis that facilitates foot mobility in the normal range of the foot arch. Future studies should address the dynamic mobility of the foot with using various types of foot orthoses.
    CLINICAL RELEVANCE: Although there are many studies focussed on flat foot and the use of foot orthoses, the mechanism of action is still unclear. This study explored foot mobility and the influence of foot orthoses and showed that a more rigid foot orthosis should be selected based on foot mobility.
    KEYWORDS: Foot orthosis; arch height index; foot mobility magnitude
    Matched MeSH terms: Range of Motion, Articular/physiology*
  19. Shetty P
    Lancet, 2013 May 18;381(9879):1709-10.
    PMID: 23691551
    Matched MeSH terms: Motion Pictures as Topic*
  20. Sheikholeslami M, Shah Z, Shafee A, Khan I, Tlili I
    Sci Rep, 2019 02 04;9(1):1196.
    PMID: 30718893 DOI: 10.1038/s41598-018-37964-y
    In the present research, aluminum oxide- water (Al2O3-H2O) nanofluid free convection due to magnetic forces through a permeable cubic domain with ellipse shaped obstacle has been reported. Lattice Boltzmann approach is involved to depict the impacts of magnetic, buoyancy forces and permeability on nanoparticles migration. To predict properties of Al2O3- water nanofluid, Brownian motion impact has been involved. Outcomes revels that considering higher magnetic forces results in greater conduction mechanism. Permeability can enhance the temperature gradient.
    Matched MeSH terms: Motion
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links