Displaying publications 81 - 100 of 142 in total

Abstract:
Sort:
  1. Irzaman, Jamal, Z., Idris, M.S., Kurnia, D., Barmawi, M.
    MyJurnal
    The specimens used were CaCO3 (Sigma Aldrich, purity 99.9 %). We have 23 parameters and 20 iterations, including two theta zero error, scale factor, thermal effect, coefficients for polynomial describing the background; U, V, W and mixing parameters of the profile peak function, lattice constants, positional parameters and overall isotropic temperature factors. Most the samples show that the crystal structure are rhombohedral with lattice constants a = b = 4.981 Å, c = 17.044 Å and space group is R3C. The microstrain (K) and the particle size (V) of CaCO3 ceramic were calculated using 10 the full width at half maximum (FWHM) of diffraction peaks from (0 1 2), (1 0 4), (0 0 6), (1 1 0), (1 1 3), (2 0 2), (0 1 8), (1 1 6), (2 2 1 ), (1 2 2) crystal planes are 2.1 x 10-2 and
    362 nm, respectively.
    Matched MeSH terms: Calcium Carbonate
  2. Sajahan NA, Wan Ibrahim WM
    ScientificWorldJournal, 2014;2014:275984.
    PMID: 25383364 DOI: 10.1155/2014/275984
    Due to similarity in composition to the mineral component of bones and human hard tissues, hydroxyapatite with chemical formula Ca10(PO4)6(OH)2 has been widely used in medical field. Both chicken and duck eggshells are mainly composed of calcium carbonate. An attempt has been made to fabricate nanohydroxyapatite (nHA) by chicken (CES) and duck eggshells (DES) as calcium carbonate source (CaCO3). CES and DES were reacted with diammonium hydrogen [(NH4)2HPO4] solution and subjected to microwave heating at 15 mins. Under the effect of microwave irradiation, nHA was produced directly in the solution and involved in crystallographic transformation. Sample characterization was done using by X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM).
    Matched MeSH terms: Calcium Carbonate/chemical synthesis*; Calcium Carbonate/chemistry
  3. Bharatham H, Md Zuki Abu Bakar Zakaria, Perimal EK, Loqman Mohamad Yusof, Muhajir Hamid
    Sains Malaysiana, 2014;43:1023-1029.
    Molluscan shells are attracting research interest due to the diverse application properties possessed. As shells are very similar to bones, this study was conducted to analyze the mineral and physiochemical composition of Cockle (Anadara granosa) shell and three other types of molluscan shell, namely Strombus canarium, Oliva sayana and Terebra dislocata as potential biomaterial for bone tissue engineering applications. Approximately 200 g of shells from each species were processed and powdered for the purpose of this study. Carbon was analyzed using the carbon analyzer while minerals and heavy metals through ICP-MS. The phase purity and crystallographic structures of the powders were identified using X-Ray Diffractometer (XRD) while the chemical functionality was determined using the Fourier transform infrared (FTIR) spectrophotometer. The analysis showed that Cockle shells contained higher content of calcium and carbon including varying amount of other minor elements comparatively. However, all four types of shell powders were found to contain below detectable levels of toxic elements. Physiochemical analysis on phase purity and crystallographic structures showed similar characteristics of carbonate group present in all four shell types. A predominantly aragonite form of calcium carbonate was detected in both XRD diffractogram and FTIR spectra for all samples. Our findings demonstrated that different types of molluscan shells have almost similar mineral and physiochemical characteristics and a predominantly aragonite form of calcium carbonate that provides a strong basis for their use as a potential bone tissues engineering material.
    Matched MeSH terms: Calcium Carbonate
  4. Molahid VLM, Kusin FM, Syed Hasan SNM
    Environ Geochem Health, 2023 Jul;45(7):4439-4460.
    PMID: 36811700 DOI: 10.1007/s10653-023-01513-y
    Mining activities have often been associated with the issues of waste generation, while mining is considered a carbon-intensive industry that contributes to the increasing carbon dioxide emission to the atmosphere. This study attempts to evaluate the potential of reusing mining waste as feedstock material for carbon dioxide sequestration through mineral carbonation. Characterization of mining waste was performed for limestone, gold and iron mine waste, which includes physical, mineralogical, chemical and morphological analyses that determine its potential for carbon sequestration. The samples were characterized as having alkaline pH (7.1-8.3) and contain fine particles, which are important to facilitate precipitation of divalent cations. High amount of cations (CaO, MgO and Fe2O3) was found in limestone and iron mine waste, i.e., total of 79.55% and 71.31%, respectively, that are essential for carbonation process. Potential Ca/Mg/Fe silicates, oxides and carbonates have been identified, which was confirmed by the microstructure analysis. The limestone waste composed majorly of CaO (75.83%), which was mainly originated from calcite and akermanite minerals. The iron mine waste consisted of Fe2O3 (56.60%), mainly from magnetite and hematite, and CaO (10.74%) which was derived from anorthite, wollastonite and diopside. The gold mine waste was attributed to a lower cation content (total of 7.71%), associated mainly with mineral illite and chlorite-serpentine. The average capacity for carbon sequestration was between 7.73 and79.55%, which corresponds to 383.41 g, 94.85 g and 4.72 g CO2 that were potentially sequestered per kg of limestone, iron and gold mine waste, respectively. Therefore, it has been learned that the mine waste might be utilized as feedstock for mineral carbonation due to the availability of reactive silicate/oxide/carbonate minerals. Utilization of mine waste would be beneficial in light of waste restoration in most mining sites while tackling the issues of CO2 emission in mitigating the global climate change.
    Matched MeSH terms: Calcium Carbonate/chemistry
  5. Junaidi Asis, Basir Jasin
    Sains Malaysiana, 2015;44:1397-1405.
    Miocene larger benthic foraminifera have been discovered from a limestone unit of the Kalumpang Formation. The limestone is exposed at the Teck Guan Quarry, Tawau, southeast Sabah. The Kalumpang Formation consists predominantly of interbedded mudstone and sandstone (graywacke), conglomerate, limestone, marl, chert and volcanic rocks. Five limestone samples have been collected and processed for petrographic analysis and identification of larger benthic foraminifera. The limestone is classified as packstone and mudstone. A total of seventeen species of larger benthic foraminifera have been identified. The foraminifera are divided into two assemblages namely Assemblage I and Assemblage II. Assemblage I is characterized by the presence of Lepidocyclina (Nephrolepidina) parva, Operculina sp. and Lepidocyclina (Eulepidina) formosa. This assemblage is an indicative of Aquitanian to Burdigalian in age (Early Miocene). Assembalge II comprises of Lepidocyclina (Nephrolepidina) sumatrensis, Lepidocyclina (Nephrolepidina) angulosa, Lepidocyclina (Nephrolepidina) ferreroi Lepidocyclina sp., Miogypsina sp., Katacycloclypeus annulatus, Katacyloclypeus martini, Cycloclypeus carpenteri, Cycloclypeus indopacificus, Cycloclypeus sp., Flosculinella bontangensis, Operculina complanata, Amphistegina bowdenensis and Amphistegina sp. This assemblage is an indicative of Langhian to Serravallian age (Middle Miocene). The foraminiferal assemblages suggest that the depositional environment was a warm tropical shallow-marine at the fore-reef shelf zone.
    Matched MeSH terms: Calcium Carbonate
  6. Hamidu A, Mokrish A, Mansor R, Razak ISA, Danmaigoro A, Jaji AZ, et al.
    Int J Nanomedicine, 2019;14:3615-3627.
    PMID: 31190815 DOI: 10.2147/IJN.S190830
    Purpose: Modified top-down procedure was successfully employed in the synthesis of aragonite nanoparticles (NPs) from cheaply available natural seawater cockle shells. This was with the aim of developing a pH-sensitive nano-carrier for effective delivery of doxorubicin (DOX) on MCF-7 breast cancer cell line. Methods: The shells were cleaned with banana pelts, ground using a mortar and pestle, and stirred vigorously on a rotary pulverizing blending machine in dodecyl dimethyl betane solution. This simple procedure avoids the use of stringent temperatures and unsafe chemicals associated with NP production. The synthesized NPs were loaded with DOX to form DOX-NPs. The free and DOX-loaded NPs were characterized for physicochemical properties using field emission scanning electron microscopy, transmission electron microscopy, zeta potential analysis, Fourier transform infrared spectroscopy, and X-ray diffraction. The release profile, cytotoxicity, and cell uptake were evaluated. Results: NPs had an average diameter of 35.50 nm, 19.3% loading content, 97% encapsulation efficiency, and a surface potential and intensity of 19.1±3.9 mV and 100%, respectively. A slow and sustained pH-specific controlled discharge profile of DOX from DOX-NPs was observed, clearly showing apoptosis/necrosis induced by DOX-NPs through endocytosis. The DOX-NPs had IC50 values 1.829, 0.902, and 1.0377 µg/mL at 24, 48, and 72 hrs, while those of DOX alone were 0.475, 0.2483, and 0.0723 µg/mL, respectively. However, even at higher concentration, no apparent toxicity was observed with the NPs, revealing their compatibility with MCF-7 cells with a viability of 92%. Conclusions: The modified method of NPs synthesis suggests the tremendous potential of the NPs as pH-sensitive nano-carriers in cancer management because of their pH targeting ability toward cancerous cells.
    Matched MeSH terms: Calcium Carbonate/chemistry
  7. Altay V, Karahan F, Öztürk M, Hakeem KR, Ilhan E, Erayman M
    J Plant Res, 2016 Nov;129(6):1021-1032.
    PMID: 27655558
    This paper covers studies on the molecular and ecological aspects of G. glabra var. glandulifera, G. flavescens ssp. flavescens and G. echinata collected from Hatay (Turkey); with the aim to better understand their genetic variation and ecological requirements for possible conservation programs. The material including total genomic DNA was extracted by the CTAB, and for PCR reaction, a total of 14 SSR primers developed for Medicago truncatula were used. PCR amplifications were performed in a Multigen(®) Thermal Cycler. Soil samples were analysed for their texture, pH, total soluble salts, calcium carbonate, total N content, total phosphorus and organic matter content. In order to see the association between genetic, ecological and geographical data, a similarity matrix was generated. Genetic similarity distances between genotypes were correlated with those of Eucledian distances obtained from ecological and geographical data. Analysis of molecular variance (AMOVA) was performed using GenAlEx 6.5 software to determine variation among and within genetic variations. The genetic analysis showed that the highest expected heterozygosity values were obtained from G. glabra while the lowest were obtained from G. echinata. In general heterozygosity values were low, especially for G. echinata. Therefore, variation appears to be lower within each species than among three species. The physical and chemical analysis of soil and plant samples indicates that mineral accumulation in plants is substantially affected by the soil characteristics. There is a need for identification of better strategies for the improvement of varieties, especially for small farmers managing marginal soils. More studies should be conducted in order to safeguard these taxa, especially G. glabra var. glandulifera which is collected intensively due to its economic value, the same is true for endemic taxon G. flavescens ssp. flavescens.
    Matched MeSH terms: Calcium Carbonate
  8. Norhazrina N, Syazwana N, Aisyah M, Aznani H, Maideen H, M S Nizam
    PhytoKeys, 2019;128:57-72.
    PMID: 31388328 DOI: 10.3897/phytokeys.128.33860
    Gunung Senyum Recreational Forest harbours 59 species, two subspecies and five varieties of mosses in 32 genera and 16 families that had been identified from a total of 589 specimens collected from the area. These figures represent 11.8% out of the 558 taxa, 20.2% out of the 158 genera and 34.7% out of the 46 families of mosses reported for Peninsular Malaysia. The total also represents 14.9% of the 442 taxa, 24.0% of the 133 genera and 40.0% of the 40 families of mosses recorded in Pahang. The largest family of mosses found in this limestone forest is Calymperaceae followed by Fissidentaceae. There are two new records for Pahang, Calymperespallidum Mitt. and Taxitheliumbinsteadii Broth. & Dixon. The analysis of species similarities of mosses found in the study area with some other selected areas showed that Gunung Senyum Recreational Forest had a high percentage of species similarity with Perlis State Park at Wang Kelian, another limestone forest, at 38%. Corticol is the main habitat utilised by mosses in Gunung Senyum Recreational Forest with 47 taxa, followed by the lignicol and calcicol each with 35 and 26 taxa, respectively.
    Matched MeSH terms: Calcium Carbonate
  9. Suzina AH, Azlina A, Shamsuria O, Samsudin AR
    Med J Malaysia, 2004 May;59 Suppl B:105-6.
    PMID: 15468840
    Mutagenicity of CORAGRAF (natural coral) and REKAGRAF (hydroxyapatite) was tested in Ames test with and without an external metabolic activation system (S9). The test revealed no mutagenic activity of both locally produced osseous substitutes.
    Matched MeSH terms: Calcium Carbonate/toxicity*
  10. Gunny AA, Arbain D, Sithamparam L
    Pak J Biol Sci, 2013 Sep 15;16(18):960-4.
    PMID: 24502155
    Production cost of enzyme is largely determined by the type of the strain and raw material used to propagate the strain. Hence, selection of the strain and raw materials is crucial in enzyme production. For Glucose oxidase (GOx), previous studies showed Aspergillus terreus UniMAP AA-1 offers a better alternative to the existing sources. Thus, a lower production cost could be logically anticipated by growing the strain in a cheaper complex media such as molasses. In this work, sugar cane molasses, supplemented with urea and carbonate salt and a locally isolated strain Aspergillus terreus UniMAP AA-1 were used to produce a crude GOx enzyme in a small scale. A statistical optimization approach namely Response Surface Methodology (RSM) was used to optimize the media components for highest GOx activity. It was found that the highest GOx activity was achieved using a combination of molasses, carbonate salt and urea at concentration 32.51, 4.58 and 0.93% (w/v), respectively. This study provides an alternative optimized media conditions for GOx production using locally available raw materials.
    Matched MeSH terms: Calcium Carbonate/metabolism
  11. Nur Hafiza, Z., Maskat, M.Y., Wan Aida, W.M., Osman, H.
    MyJurnal
    A study was carried out to optimize the deacidification process for noni (Morinda citrifolia L.) extract using packed column of calcium carbonate. The experiments were based on a 3-level factorial design to study the optimum process of deacidification for M. citrifolia extract. The M. citrifolia extract was treated with CaCO3 packed in different column diameter (20, 25 and 30 mm), height of calcium carbonate (0, 0.5 and 1 cm) and feed rate (10, 30 and 50 ml/min). Physico-chemical characteristics which include pH, titratable acidity, turbidity, total polyphenol content and total soluble solids were measured. Results showed that only pH, titratable acidity and turbidity could be well represented using statistical models. For pH, only the effect of height of CaCO3 was found to be significant. While for titratable acidity and turbidity, effects of diameter column and height of CaCO3 were significant. The optimum conditions for the deacidification of M. citrifolia extract was by using a column diameter of 30 mm, CaCO3 height of 1 cm, and a feed rate of 50 ml/min.
    Matched MeSH terms: Calcium Carbonate
  12. Shafiu Kamba A, Zakaria ZA
    Biomed Res Int, 2014;2014:215097.
    PMID: 24734228 DOI: 10.1155/2014/215097
    Calcium carbonate (CaCO3) nanocrystals derived from cockle shells emerge to present a good concert in bone tissue engineering because of their potential to mimic the composition, structure, and properties of native bone. The aim of this study was to evaluate the biological response of CaCO3 nanocrystals on hFOB 1.19 and MC3T3 E-1 osteoblast cells in vitro. Cell viability and proliferation were assessed by MTT and BrdU assays, and LDH was measured to determine the effect of CaCO3 nanocrystals on cell membrane integrity. Cellular morphology was examined by SEM and fluorescence microscopy. The results showed that CaCO3 nanocrystals had no toxic effects to some extent. Cell proliferation, alkaline phosphatase activity, and protein synthesis were enhanced by the nanocrystals when compared to the control. Cellular interactions were improved, as indicated by SEM and fluorescent microscopy. The production of VEGF and TGF-1 was also affected by the CaCO3 nanocrystals. Therefore, bio-based CaCO3 nanocrystals were shown to stimulate osteoblast differentiation and improve the osteointegration process.
    Matched MeSH terms: Calcium Carbonate/chemistry*
  13. Melek Zeng?n, Semra Sayg?n, Nazm? Polat
    Sains Malaysiana, 2015;44:657-662.
    Otoliths, which can be used for the evaluation of relationships between the environment and organisms, are structures
    consisting of calcium carbonate. The aim of this study was to realize the shape analysis. In addition, it is to detect the
    characteristics of otolith biometrics in order to determine the relationship between the fish size of Engraulis encrasicolus
    L. from the Black and Marmara Seas. The samples were obtained from the Black and Marmara Seas between December
    2013 and February 2014. The relationships between the TL (Total length) and OL (Otolith length), TL and OB (Otolith
    breadth), and TL and OW (Otolith weight) were determined using the linear regression equation. Form factor, roundness,
    circularity and rectangularity were used for shape analyses. According to the data, there was no difference between
    localities (p>0.05). Moreover, there was no difference between the left and right otoliths of the individuals sampled from
    the same locality (p>0.05). According to the regression coefficient for relationships of TL-OL, TL-OB and TL-OW, otolith
    length was identified as the best index for estimating fish length (r
    2
    >0.70). It showed that index values were statistically
    different between two populations (p<0.001).
    Matched MeSH terms: Calcium Carbonate
  14. Muhammad SN, Kusin FM, Md Zahar MS, Mohamat Yusuff F, Halimoon N
    Environ Technol, 2017 Aug;38(16):2003-2012.
    PMID: 27745113 DOI: 10.1080/09593330.2016.1244568
    Passive bioremediation of metal- and sulfate-containing acid mine drainage (AMD) has been investigated in a batch study. Multiple substrates were used in the AMD remediation using spent mushroom compost (SMC), limestone, activated sludge (AS), and woodchips (WC) under anoxic conditions suitable for bacterial sulfate reduction (BSR). Limestones used were of crushed limestone (CLS) and uncrushed limestone, provided at two different ratios in mixed substrates treatment and varied by the proportion of SMC and limestone. The SMC greatly assisted the removals of sulfate and metals and also acted as an essential carbon source for BSR. The mixed substrate composed of 40% CLS, 30% SMC, 20% AS, and 10% WC was found to be effective for metal removal. Mn, Cu, Pb, and Zn were greatly removed (89-100%) in the mixed substrates treatment, while Fe was only removed at 65%. Mn was found to be removed at a greatly higher rate than Fe, suggesting important Mn adsorption onto organic materials, that is, greater sorption affinity to the SMC. Complementary with multiple treatment media was the main mechanism assisting the AMD treatment through microbial metal reduction reactions.
    Matched MeSH terms: Calcium Carbonate
  15. Idris SB, Abdul Kadir A, Abdullah JFF, Ramanoon SZ, Basit MA, Abubakar MZZA
    Front Vet Sci, 2020;7:270.
    PMID: 32613011 DOI: 10.3389/fvets.2020.00270
    The development and utilization of nano-antibiotics is currently gaining attention as a possible solution to antibiotic resistance. The aim of this study was therefore to determine the pharmacokinetics of free oxytetracycline (OTC) and oxytetracycline loaded cockle shell calcium carbonate-based nanoparticle (OTC-CNP) after a single dose of intraperitoneal (IP) administration in BALB/c mice. A total of 100 female BALB/c mice divided into two groups of equal number (n = 50) were administered with 10 mg/kg OTC and OTC-CNP, respectively. Blood samples were collected before and post-administration from both groups at time 0, 5, 10, 15, and 30 min and 1, 2, 6, 24, and 48 h, and OTC plasma concentration was quantified using a validated HPLC-UV method. The pharmacokinetic parameters were analyzed using a non-compartment model. The Cmax values of OTC in OTC-CNP and free OTC treated group were 64.99 and 23.53 μg/ml, respectively. OTC was detected up to 24 h in the OTC-CNP group as against 1 h in the free OTC group following intraperitoneal administration. In the OTC-CNP group, the plasma elimination rate of OTC was slower while the half-life, the area under the curve, and the volume of the distribution were increased. In conclusion, the pharmacokinetic profile of OTC in the OTC-CNP group differs significantly from that of free OTC. However, further studies are necessary to determine the antibacterial efficacy of OTC-CNP for the treatment of bacterial diseases.
    Matched MeSH terms: Calcium Carbonate
  16. Chung KF, Leong WC, Rubite RR, Repin R, Kiew R, Liu Y, et al.
    Bot Stud, 2014 Dec;55(1):1.
    PMID: 28510906 DOI: 10.1186/1999-3110-55-1
    BACKGROUND: The picturesque limestone karsts across the Sino-Vietnamese border are renowned biodiversity hotspot, distinguished for extremely high endemism of calciphilous plants restricted to caves and cave-like microhabitats that have functioned as biological refugia on the otherwise harsh habitats. To understand evolutionary mechanisms underlying the splendid limestone flora, dated phylogeny is reconstructed for Asian Begonia, a species-rich genus on limestone substrates represented by no less than 60 species in southern China, using DNA sequences of nrITS and chloroplast rpL16 intron. The sampling includes 94 Begonia species encompassing most major Asian clades with a special emphasized on Chinese species.

    RESULTS: Except for two tuberous deciduous species and a species with upright stems, a majority of Sino-Vietnamese limestone Begonia (SVLB), including sect. Coelocentrum (19 species sampled) and five species of sect. Diploclinium, Leprosae, and Petermannia, are rhizomatous and grouped in a strongly supported and yet internally poorly resolved clade (Clade SVLB), suggesting a single evolutionary origin of the adaptation to limestone substrates by rhizomatous species, subsequent species radiation, and a strong tendency to retain their ancestral niche. Divergence-time estimates indicate a late Miocene diversification of Clade SVLB, coinciding with the onset of the East Asian monsoon and the period of extensive karstification in the area.

    CONCLUSIONS: Based on our phylogenetic study, Begonia sect. Coelocentrum is recircumscribed and expanded to include other members of the Clade SVLB (sect. Diploclinium: B. cavaleriei, B. pulvinifera, and B. wangii; sect. Leprosae: B. cylindrica and B. leprosa; sect. Petermannia: B. sinofloribunda). Because species of Clade SVLB have strong niche conservatism to retain in their ancestral habitats in cave-like microhabitats and Begonia are generally poor dispersers prone to diversify allopatrically, we propose that extensive and continuous karstification of the Sino-Vietnamese limestone region facilitated by the onset of East Asian monsoon since the late Miocene has been the major driving force for species accumulation via geographic isolation in Clade SVLB. Morphologically species of Clade SVLB differ mainly in vegetative traits without apparent adaptive value, suggesting that limestone Begonia radiation is better characterized as non-adaptive, an underappreciated speciation mode crucial for rapid species accumulations in organisms of low vagility and strong niche conservatism.

    Matched MeSH terms: Calcium Carbonate
  17. Hussain S, Aziz HA, Isa MH, Adlan MN, Asaari FA
    Bioresour Technol, 2007 Mar;98(4):874-80.
    PMID: 16716587
    The purpose of the present study was to examine the removal of ammoniacal nitrogen (NH4-N) from synthetic wastewater using limestone (LS) and granular activated carbon (GAC) mixture as low cost adsorbent. In batch study, optimum shaking and settling times were 150 and 120 min, respectively. The LS-GAC mixture ratio of 25:15 removed about 58% NH4-N. The smaller particle size of medium yielded higher adsorption capacity. The equilibrium adsorption data followed the Freundlich isotherm (R2 > 0.98) but it showed weak bond. Adsorption kinetics were well described by the pseudo second-order rate model (R2 > 0.93). The upflow column showed that higher flow rate and initial concentration resulted in shorter column saturation time. The study showed that the usage of GAC could be reduced by combining GAC with LS for the removal of NH4-N from wastewater; thus reducing the cost of treatment.
    Matched MeSH terms: Calcium Carbonate*
  18. Aziz HA, Yusoff MS, Adlan MN, Adnan NH, Alias S
    Waste Manag, 2004;24(4):353-8.
    PMID: 15081062
    Limestone has been proven effective in removing metals from water and wastewater. A literature review indicated that limestone is capable of removing heavy metals such as Cu, Zn, Cd, Pb, Ni, Cr, Fe and Mn are through a batch process or by filtration technique. The removal capability is reported at up to 90%. However, to date most of the studies have been focused on synthetic wastewater. The present study attempts to investigate the suitability of limestone to attenuate total iron (Fe) from semi aerobic leachate at Pulau Burung Landfill Site in Penang, Malaysia. Iron was found in significant quantities at the landfill site. The study also aims to establish the Fe isotherm and breakthrough time of the proposed limestone filter for post-treatment to the migrating landfill leachate before its release to the environment. The Fe isotherms were established using a batch equilibrium test, while the breakthrough characteristics were determined using continuous flow permeating through a limestone column. The latter was used in order to simulate the continuous flow of leachate that would occur in the proposed limestone filter. The limestone media used in the experiment contain more than 90% CaCO3 with particle sizes ranging from 2 to 4 mm. Four filter columns (each 150 mm in diameter and 1000 mm depth) were installed at the landfill site. Metal loadings were kept below 0.5 kg /m3 day and the experiment was run continuously for 30 days. Initial results indicated that 90% of Fe can be removed from the leachate based on retention time of 57.8 min and surface loading of 12.2 m3/m2 day. For the batch study on the Fe isotherm, the results indicated that limestone is potentially useful as an alternative leachate treatment system at a relatively low cost.
    Matched MeSH terms: Calcium Carbonate/chemistry*
  19. Zwain HM, Chang SM, Dahlan I
    Prep Biochem Biotechnol, 2019;49(4):344-351.
    PMID: 30712465 DOI: 10.1080/10826068.2019.1566144
    Microbial content formed in bioreactors plays a significant role in the anaerobic process. Therefore, the physicochemical characteristics of microbial content in a modified anaerobic inclining-baffled reactor (MAI-BR) treating recycled paper mill effluent (RPME) were investigated using Fourier transform infrared (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric (TG), and derivative thermogravimetric (DTG) analyses, scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), Brunauer-Emmett-Teller (BET), and surface area analyzer. FTIR spectra revealed that the microbial content had stronger characteristic peaks corresponding to alcohols, water, lipids carbohydrates, proteins, and mineral compounds. Calcite, muscovite, and lepidolite were the prevalent mineral phases found by XRD analysis. The elemental of these minerals like C, Ca, N, O, and Si was confirmed by XPS results. The microbial content samples from each compartment showed similar thermal behavior. SEM images showed that straight rod-shaped and Methanosaeta-like microorganisms were predominant, whereas C, O, and Ca were noticed by EDS on the surface of granules. The BET surface areas and pores of granules are found to decline throughout the reactor's compartment, where Compartment 1 had the largest values. Thus, the findings of this study establish further understanding of the physicochemical properties of microbial content formed in MAI-BR during the RPME treatment.
    Matched MeSH terms: Calcium Carbonate
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links