Displaying publications 81 - 100 of 2877 in total

Abstract:
Sort:
  1. Kesan Komposisi Magnesium ke atas Pemagnetan dan Kerintangan Elektrik Ferit Mnx-zMgzZn1-xFe2O4 (Effects of Magnesium Composition on the Magnetization and Electrical Resistivity of Mnx-zMgzZn1-xFe2O4 Ferrites)
    Ahmad Nazlin Yusoff, Mustaffa Hj. Abdullah, Sahrin Hj. Ahmab, Ng L
    Sains Malaysiana, 1996;25.
    Sampels of Mnx-zMgzZn1-xFe2O4 ferrites, with x = 0.5, 0 < z < 0.5; x = 0.6, 0 < z 0.6 and x = 0.7, 0 < z < 0.7, were prepared by solid state reaction. For all samples, magnetization as a function of applied magnetic field was measured at room temperature (TR) and several temperatures above TR but below the Neel temperature (TN); while magnetic hysteresis was obtained at TR and 373 K using a vibrating sample magnetometer (VSM). Electrical resistivity at TR was measured by a two terminal method. The three series of Mn-Mg-Zn ferrite indicate a maximum ,agnetization at certain substitution of Mg. TN increased with the increase of Mg content while resistivity varied in the opposite manner. The variation of magnetization is interpreted as due to Mg started to replace the Mn at the tetrahedral sites (A) so that the resultant magnetic moment increased. However further substitution occurred at the octahedral sites (B), thus lowering the magnetic moment. A small coercivity indicates that the samples are soft ferrites with a small energy loss. A reduction in the electrical resistivity with Mg content probably due to an increase in the mobility of charge hopping between the Fe2+ and Fe3+ ions and also between Mn2+ and Mn3+ ions.
    Sampel ferit Mnx-zMgzZn1-xFe2O4 dengan x = 0.5, 0 < z < 0.5; x = 0.6, 0 < z 0.6 dan x = 0.7, 0 < z < 0.7, disediakan dengan tindak balas keadaan pepejal. Pengukuran pemagnetan sebagai fungsi medan magnet dilakukan pada suhu bilik (TR) dan suhu-suhu yang lebih tinggi tetapi di bawah suhu Neel bilik (TR) dan suhu-suhu yang lebih tinggi tetapi di bawah suhu Neel (TN) serta histerisis magnet pada suhu bilik dan 373 K diperolehi untuk semua sampel menggunakan magnetometer sampel bergetar (VSM). Kerintangan elektrik pada suhu bilik diperolehi dengan kaedah dua terminal. Ketiga-tiga siri ferit Mn-Mg-Zn itu masing-masing menunjukkan suatu pemagnetan maksimum pada suatu kadar penggantian Mn oleh Mg. TN meningkat dengan kandungan Mg tetapi kerintangan elektrik berubah sebaliknya. Perubahan pemagnetan seperti yang tersebut disebabkan Mg mula menggantikan Mn pada tapak tetrahedron (A) menyebabkan momen magnet paduan meningkat. Penambahan Mg seterusnya menyebabkan Mn pada tapak oktahedron pula diganti, sehingga momen magnet paduan mengurang. Koersiviti yang kecil menunjukkan sampel bersifat magnet lembut dengan kehilangan tenaga yang sangat kecil. Pengurangan kerintangan dengan penambahan Mg mungkin disebabkan oleh peningkatan kelincahan pembawa cas yang melompat di antara ion-ion Fe2+ dan Fe3+ dan juga di antara Mn2+ dan Mn3+.
    Matched MeSH terms: Temperature
  2. Chromium(III) sorption enhancement through NTA--modification of biological materials
    Low KS, Lee CK, Lee PL
    Bull Environ Contam Toxicol, 1997 Mar;58(3):380-6.
    PMID: 9008046
    Matched MeSH terms: Temperature
  3. The effect of filler content and processing variables on dimensional accuracy of experimental composite inlay material
    Razak AA, Harrison A
    J Prosthet Dent, 1997 Apr;77(4):353-8.
    PMID: 9104710
    Dimensional accuracy of a composite inlay restoration is important to ensure an accurate fit and to minimize cementation stresses.
    Matched MeSH terms: Hot Temperature
  4. Single dose pharmacokinetics of oral artemether in healthy Malaysian volunteers
    Mordi MN, Mansor SM, Navaratnam V, Wernsdorfer WH
    Br J Clin Pharmacol, 1997 Apr;43(4):363-5.
    PMID: 9146847
    AIMS: To determine the pharmacokinetics of artemether (ARM) and its principal active metabolite, dihydroartemisinin (DHA) in healthy volunteers.

    METHODS: Six healthy male Malaysian subjects were given a single oral dose of 200 mg artemether. Blood samples were collected to 72 h. Plasma concentrations of the two compounds were measured simultaneously by reversed-phase h.p.l.c. with electro-chemical detection in the reductive mode.

    RESULTS: Mean (+/- s.d.) maximum concentrations of ARM, 310 +/- 153 micrograms l-1, were reached 1.88 +/- 0.21 h after drug intake. The mean elimination half-life was 2.00 +/- 0.59 h, and the mean AUC 671 +/- 271 micrograms l-1 h. The mean Cmax of DHA, 273 +/- 64 micrograms l-1 was observed at 1.92 +/- 0.13 h. The mean AUC of DHA was 753 +/- 233 micrograms h l-1'. ARM and DHA were stable at < or = -20 degrees C for at least 4 months in plasma samples.

    CONCLUSIONS: The relatively short half-life of ARM may be one of the factors responsible for the poor radical cure rate of falciparum malaria with regimens employing daily dosing. In view of the rapid loss of DHA in plasma samples held at room temperature (26 degrees C) it is recommended to store them at a temperature of < or = -20 degrees C as early as possible after sample collection.

    Matched MeSH terms: Temperature
  5. Fulltext Carbon monoxide poisoning from gas water heater installed and operated in the bathroom
    Chong CK, Senan P, Kumar GV
    Med J Malaysia, 1997 Jun;52(2):169-71.
    PMID: 10968076
    Two cases of carbon monoxide poisoning involving 3 victims occurred in Cameron Highlands in the months of August and September 1995. Two of the victims were found dead in the bathrooms where they were taking a bath while the other one survived. Blood toxicology from the post mortems revealed high levels of carbon monoxide. The only significant source of carbon monoxide in both cases were the gas water heaters which were installed in the bathrooms. A multigas detector was used to monitor the level of carbon monoxide in one of the bathrooms and carbon monoxide was found to be produced to 1200 ppm in 16 minutes during operation of the heater. Carbon monoxide poisoning from gas water heaters installed in bathroom is a significant hazard.
    Matched MeSH terms: Hot Temperature
  6. Influence of iron, growth temperature and plasmids on siderophore production in Aeromonas hydrophila
    Naidu AJ, Yadav M
    J Med Microbiol, 1997 Oct;46(10):833-8.
    PMID: 9364139
    Aeromonas hydrophila strains obtained from diarrhoeal samples of human patients (19 isolates) and freshwater ponds (11 isolates) were analysed for siderophore production. Both clinical and environmental isolates showed significantly increased siderophore production under iron-limiting conditions both at 28 degrees C and at 37 degrees C. Clinical isolates consistently produced higher levels of siderophores than did the environmental isolates. The role of plasmids in moderating siderophore production was studied after curing with acridine orange. Treatment with acridine orange for 24 h removed the larger plasmids but the smaller plasmids (< 5 MDa), more common in the environmental isolates, were resistant to curing. As found in the untreated isolates, the cured clinical isolates produced higher mean levels of siderophores than the cured environmental isolates. Siderophore production in A. hydrophila was significantly influenced by iron-limiting cultural conditions and the source of isolates, but plasmid content and growth temperature at 28 degrees C or 37 degrees C had little effect on production. The basis for the greater production of siderophores in clinical isolates than in environmental isolates needs further study.
    Matched MeSH terms: Temperature
  7. Studies on variation in Lancefield group A type 50 streptococcal cell-wall carbohydrate
    Kurl DN
    Adv Exp Med Biol, 1997;418:607-10.
    PMID: 9331725
    Matched MeSH terms: Temperature
  8. The relationship between Kuala Lumpur haze and asthmatic attacks in children
    Zailina Hashim, Juliana Jalaludin, Norzila Muhamad Zainudin, Azizi Omar, Jamal H. Hashim
    Malaysian Journal of Child Health, 1997;9(2):151-159.
    MyJurnal
    A study on 30 asthmatic children was conducted in Kuala Lumpur. The objective of this study was to study the relationship between respirable particulate (PM10), sulphur dioxide, ozone and various meteorological factors such as humidity, level ofrainfall and temperature with asthma attacks. This study was conducted from 1st September to 31 December 1994. Patients were selected from the Paediatric Unit, Kuala Lumpur Hospital. Questionnaires were used to obtain information from their parents on the history and severity ofasthmatic attacks ofthese patients. Questionnaires were also used to determine if the indoor sources contributed to the attack. Diary cards were used to collect information on the frequency of asthmatic attacks. Each patient's progress was followed through every week during the study period and the attacks were recorded. The data on air quality on the PM10, sulphur dioxide, nitrogen dioxide, carbon monoxide and ozone were collected hourly using the microcomputer system of air monitoring unit from the Universiti Pertanian Malaysia air quality monitoring station located at the City Hall, Kuala Lumpur. The meteorological parameters such as temperature, relative humidity and rain-fall levels were also monitored daily. The asthmatic attack percentage was obtained by dividing the number of attacks in a day with the total number of sample and multiplying by a hundred. Statistical tests indicated that there was a significant correlation between asthmatic attacks and the PM10 concentrations (r=0.73), nitrogen dioxide (r=0.57) and.carbon monoxide (r=0.53) throughout the study period. During the haze episode, more significant correlations between asthmatic attacks, PM10 concentra-tions (0.86), carbon monoxide (0.79) and nitrogen oxide (0.53) were found. Multiple regression statistical test showed that PM10 had the greatest influence on the asthmatic attack rate. The minute respirable particulate which entered the respiratory system of the asthmatics triggered attacks on these patients.
    Matched MeSH terms: Temperature
  9. Effects of Yttria Doping on Some Properties of YBa2Cu3O7-δ Superconductor
    Mustaffa Hj. Abdullah, Tan TK
    Sains Malaysiana, 1997;26.
    Samples of Y-Ba-Cu-O superconductor with nominal compositions of YBa2Cu3O7-d + x (weight %) Y2O3 (x = 0 - 15) were prepared by solid state reaction method using the Y2Cu2O5 and BaCuO2 precursors as the starting reagents. The X-ray diffraction (XRD) diffractograms for the doped samples (x> 0) show an additional non-superconducting Y2BaCuO5 (211) phase. The scanning electron microscope (SEM) micrographs show that the smaller Y2BaCuO5 grains are precipitated on the surface of the larger YBa2Cu3O7-d (YBCO) crystals. The grain size of the YBCO decreases with increasing yttria. The superconducting zero resistivity critical temperature (Tco) of the doped samples is very close to the Tco of the YBCO for x < 5, but it seems to be significantly decreasing for larger x. The transport critical current density (J) for x < 5 is enhanced due to magnetic flux pinning process by the 211 phase. However, Jc decreased for larger x due to the increase of weak links at the grain boundaries of the YBCO phase.
    Sampel superkonduktor Y-Ba-Cu-O dengan komposisi nominal YBa2Cu3O7-d + x (% berat) Y2O3 (x = 0 -15) disediakan dengan kaedah tindakbalas keadaan pepejal menggunakan bahan pelopor Y2Cu2O5 dan BaCuO2 Difraktogram pembelauan sinar-X (XRD) bagi sampel yang didop (x > 0) menunjukkan wujudnya fasa tak mensuperkonduksi Y2BaCuO5 (211). Mikrograf mikroskop imbasan elektron (SEM) menunjukkan bahawa butiran Y2BaCuO5 yang lebih kecil itu termendap di atas permukaan hablur YBa2Cu3O7-d yang lebih besar. Saiz hablur YBCO mengecil dengan peningkatan yittria. Suhu genting kerintangan sifar (Tc) bagi sampel yang didop adalah hampir dengan Tco bagi YBCO untuk x<5, tetapi menurun dengan agak cepat untuk x yang lebih besar. Ketumpatan arus genting angkutan (J) untuk x < 5 meningkat jika dibandingkan dengan YBCO disebabkan oleh proses kepinan fluks magnet oleh fasa 211. Walau bagaimanapun, Jc menurun untuk x yang lebih tinggi kerana meningkatnya hubungan lemah pada sempadan butiran fasa YBCO.
    Matched MeSH terms: Temperature
  10. Anthropometric status and resting metabolic rate in users of the areca nut and smokers of tobacco in rural Sarawak
    Strickland SS, Duffield AE
    Ann Hum Biol, 1997 Sep-Oct;24(5):453-74.
    PMID: 9300122
    The areca nut is chewed by many of the world's population, mainly in South and Southeast Asia. Anthropometric data for 458 Sarawaki adults aged over 24 years, measured both in 1990 and in 1996, were examined in relation to use of tobacco and areca nut. Compared to non-smokers, smoking men were significantly taller and slightly (not significantly) thinner in both years, while smoking women were thinner in 1990 and slightly (not significantly) thinner in 1996. In both sexes there was an increase in the mean and range of body mass index (BMI, W/H2) over the 6-year interval. Smoking women showed a significantly smaller increment in BMI after allowing for areca nut use, which was associated with a similar trend, and this finding depended on including areca use in the model. The trend for men was similar. Possible effects of areca use could reflect variation in 'affluence' or conservatism, or appetite suppression. However, resting metabolic rate in 54 men and 70 women aged 24-60 years was associated with areca use. This association appeared to be mediated by the maximum room temperature of the 24 h preceding measurement. In women, a significant curvilinear association of RMR with maximum temperature was found in users of areca nut but not in non-users. In men, RMR was 7% higher (p < 0.05) in users of areca nut than in non-users, after allowing for age, height, weight, the sum of four skinfold thicknesses, and haemoglobin, but the association with maximum temperature was similar in both groups. It is speculated that constituents of areca nut modulate thermoregulatory pathways, resulting in prolonged temperature-dependent and hyperthermic heat production in this population; that males are more responsive to this effect than females; and that by this mechanism, and possibly also through centrally mediated effects on appetite for food, areca use could contribute to long-term variation in energy balance represented by change in BMI.
    Matched MeSH terms: Body Temperature Regulation/physiology; Temperature
  11. Detection of microleakage around dental restorations: a review
    Alani AH, Toh CG
    Oper Dent, 1997 Jul-Aug;22(4):173-85.
    PMID: 9484158
    Matched MeSH terms: Hot Temperature
  12. Survival of Vibrio spp. including inoculated V. cholerae 0139 during heat-treatment of cockles (Anadara granosa)
    Liew WS, Leisner JJ, Rusul G, Radu S, Rassip A
    Int J Food Microbiol, 1998 Jul 21;42(3):167-73.
    PMID: 9728687
    The effect of heat-treatment on the internal temperature of raw cockles (Anadara granosa) and survival of their intrinsic flora of Vibrio spp. as well as of inoculated V. cholerae 0139 was examined. The cockles were purchased from markets in Malaysia and had an average weight including shells of 8.90+/-2.45 g. In one experiment heatpenetration of individual cockles was examined. Cockles weighing < 8 g (including shell) exhibited maximum internal temperatures of between 50 and 75 degrees C when heated in water at 99 degrees C for 10 s and 71-93 degrees C when heated for 30 s. Cockles weighing > 12 g exhibited maximum internal temperatures between 42 and 58 degrees C when heated in water at 99 degrees C for 10 s and 56-69 degrees C when heated for 30 s. In another experiment, heat-treatment of 10 cockles treated as a group at 99 degrees C for 10 or 30 s resulted in reduction of levels of intrinsic Vibrio spp. (enumerated directly on thiosulphate-citrate-bile salt sucrose agar; TCBS) from 5.73 to 3.15 log cfu g(-1) or below 1 log cfu g(-1), respectively. The levels of Vibrio spp. after heat-treatment decreased with an increase in numbers of cockles grouped together during treatment. In a third experiment V. cholerae 0139 was inoculated into cockles and subjected to heat-treatment at 99 degrees C for 0, 10, 15, 20, 25 or 30 s. The levels of Vibrio spp. in uninoculated, non-heat-treated cockles was 4.89 log cfu g(-1) on TCBS, and the predominant species were V. parahaemolyticus and V. alginolyticus. V. cholerae 0139 inoculated into cockles with an average weight of 13.5+/-1.90 g (including shell) decreased for samples examined immediately after heat-treatment from 6 log cfu g(-1) initially to 3.5 log cfu g(-1) after 25 s and < 1 log cfu g(-1) (TCBS) after 30 s of heat-treatment. The most probable number method by enrichment in alkaline peptone water gave in general within 1 log unit higher counts than TCBS direct enumeration. TCBS direct enumeration and MPN counts were up to 2.38 or 1.30 log units higher, respectively, for samples heat-treated for 20 s or longer and stored for 6 h at 30 degrees C before examination, than for samples heat-treated for same periods of time and examined immediately. This study shows that a mild heat-treatment of cockles for up to 25 s is inadequate to ensure a large reduction in numbers of Vibrio spp., including V. cholerae 0139.
    Matched MeSH terms: Hot Temperature
  13. Immigrant Health Study. 5. Faecal pathogens in foreign workers. [Abstract]
    Suresh K, Rajah S, Khairul Anuar A, Anuar Zaini MZ, Saminathan R, Ramakrishnan S
    JUMMEC, 1998;3:62-63.
    One hundred seventy three stool samples were obtained from workers from Indonesia, Bangladesh, Myanmar, Pakistan and others. The stool samples were examined for Ascaris, Trichuris, Hookworm, Schistosomes, trematodes and cestodes. The protozaon parasites included Bnlantidiirrir coli, Blastocystis honlinis, Cyclospora cryptosporidium, Microsporidiirin, Entamoeeba histolytica, Giardia lamblia, lodamoeba butschilli. Of these 21.9%, 17% and 1% of the population studied had hookworm, Trichuris trichiura and Ascaris lumbricoides infections respectively. There was only one Indonesian reported to have Hymenolepis nana infections. The most common protozoan seen in the faecal sample is Blastocystis hominis (36%) followed by Giardia lamblia (4%). Most of the stools positive with these faecal pathogens were semisolid especially the ones positive for the protozoan. We have also shown Blastocystis from the Indonesian workers show very small forms almost 3-5 in size compared to the normal size of 10-15 pm in the other nationalities. These forms show a distinct growth profile in cultures and appears to be more resistant to temperature changes than Blastocystis seen in the other two nationalities. The high incidence of Hookworm and Trichuris infections is suggestive that if these workers are left unheated their productivity will be hampered by other possible serious complications such as anaemia, weight loss, abdominal pain with diarrhoea1 stools and nausea. There are increasing reports that Blastocystis hominis is pathogenic. Flatulence, abdominal discomfort and the increase in the frequency of the passing watery stool has been noted in patients infected with the parasite. Since most of the workers are generally housed in crowded rooms it is highly likely that this will facilitate transmission through the faecal-oral route of both Giardia and Blastocystis possibly increasing the incidences of these infections among workers.
    Matched MeSH terms: Temperature
  14. Fulltext Haematological and plasma electrolyte changes after long distance running in high heat and humidity
    Singh R, Sirisinghe RG
    Singapore Med J, 1999 Feb;40(2):84-7.
    PMID: 10414164
    To investigate the acute effects of an 18 km run on the haematological and plasma electrolyte parameters, in recreational runners under conditions of high temperatures and humidity.
    Matched MeSH terms: Body Temperature
  15. Production of organic acids from kitchen wastes
    Loh CW, Fakhru'l-Razi A, Hassan MA, Karim MI
    Artif Cells Blood Substit Immobil Biotechnol, 1999 Sep-Nov;27(5-6):455-9.
    PMID: 10595448
    This study involves the production of short-chain organic acids from kitchen wastes as intermediates for the production of biodegradable plastics. Flasks, without mixing were used for the anaerobic conversion of the organic fraction of kitchen wastes into short-chain organic acids. The influence of pH, temperature and addition of sludge cake on the rate of organic acids production and yield were evaluated. Fermentations were carried out in an incubator at different temperatures controlled at 30 degrees C. 40 degrees C, 50 degrees C, 60 degrees C and uncontrolled at room temperature. The pH was also varied at pH 5, 6, 7, and uncontrolled pH. 1.0 M phosphate buffer was used for pH control, and 1.0 M HCl and 1.0 M NaOH were added when necessary. Sludge cake addition enhanced the rate of maximum acids production from 4 days to 1 day. The organic acids produced were maximum at pH 7 and 50 degrees C i.e., 39.84 g/l on the fourth day of fermentation with a yield of 0.87 g/g soluble COD consumed, and 0.84 g/g TVS. The main organic acid produced was lactic acid (65-85%), with small amounts of acetic (10-30%), propionic (5-10%), and butyric (5-20%) acids. The results of this study showed that kitchen wastes could be fermented to high concentration of organic acids, which could be used as substrates for the production of biodegradable plastics.
    Matched MeSH terms: Temperature
  16. Kinetics study of palm oil hydrolysis using immobilized lipase Candida rugosa in packed bed reactor
    Min CS, Bhatia S, Kamaruddin AH
    Artif Cells Blood Substit Immobil Biotechnol, 1999 Sep-Nov;27(5-6):417-21.
    PMID: 10595442
    Continuous hydrolysis of palm oil triglyceride in organic solvent using immobilized Candida rugosa on the Amberlite MB-1 as a source of immobilized lipase was studied in packed bed reactor. The enzymatic kinetics of hydrolysis reaction was studied by changing the substrate concentration, reaction temperature and residence time(tau) in the reactor. At 55 degrees C, the optimum water concentration was found to be 15 % weight per volume of solution (%w/v). The Michaelis-Menten kinetic model was used to obtain the reaction parameters, Km(app) and V max(app). The activation energies were found to be quite low indicating that the lipase-catalyzed process is controlled by diffusion of substrates. The Michaelis-Menten kinetic model was found to be suitable at low water concentration 10-15 %w/v of solution. At higher water concentration, substrate inhibition model was used for data analysis. Reactor operation was found to play an important role in the palm oil hydrolysis kinetic.
    Matched MeSH terms: Temperature
  17. Studies on the kinetics of Isopropyl Palmitate synthesis in packed bed bioreactor using immobilized lipase
    Kee CY, Hassan M, Ramachandran KB
    Artif Cells Blood Substit Immobil Biotechnol, 1999 Sep-Nov;27(5-6):393-8.
    PMID: 10595438
    The objective of this research was to study the kinetics of synthesis of a commercially important ester - Isopropyl Palmitate (IPP) using immobilized lipase (Lipozyme IM). It was studied in a packed bed differential reactor. In order to establish the kinetics of the reaction, parameters such as linear velocity of the fluid through the reactor, particle size, substrate concentration, substrate molar ratio, temperature and water activity were studied. Operational and storage stability of the enzyme were also assessed. The reaction followed Michaelis-Menton kinetics as observed from the relationship of initial rate of the reaction as a function of substrate concentration. It was found that the optimum substrate concentration was 0.15M palmitic acid and isopropyl alcohol in 1:1 stoichiometric ratio. Inhibition by excess of isopropyl alcohol has been identified. The optimum temperature for the esterification reaction was found to be around 50 degrees C. The activation energy of this process was determined to be 43.67 kJ/mol. The optimum water content was 0.50%. The reaction rates were measured in the absence of any significant external diffusional limitations. Since internal diffusional limitations could not be eliminated, the kinetics observed is only apparent.
    Matched MeSH terms: Temperature
  18. Ability of Pycnoporus sanguineus to remove copper ions from aqueous solution
    Mashitah, Zulfadhly Z, Bhatia S
    Artif Cells Blood Substit Immobil Biotechnol, 1999 Sep-Nov;27(5-6):429-33.
    PMID: 10595444
    The equilibrium sorption capacity of a macro-fungi, Pycnoporus sanguineus biomass was studied using a single-metal system comprising copper ions. The rate and extent for the removal of copper were subjected to environmental parameters such as pH, biomass loading, temperature, and contact time. Results showed that the uptake of copper increased as the pH increased. However, as the biomass loading increased, the amount of metal uptake decreased. Instead, temperature does not have a significant effect on the metal uptake, especially between 30 to 40 degrees C. A maximum adsorption of copper ions was also observed within 15 minutes of reaction time for the entire sample tested. Furthermore, pre-treatment with sodium bicarbonate and boiling water significantly improved the sorption capacity of copper by Pycnoporus sanguineus.
    Matched MeSH terms: Temperature
  19. Risk factors associated with neonatal hypothermia during cleaning of newborn infants in labour rooms
    Cheah FC, Boo NY
    J Trop Pediatr, 2000 Feb;46(1):46-50.
    PMID: 10730042
    Cleaning newborn infants with coconut oil shortly after birth is a common practice in Malaysian labour rooms. This study aimed: (1) to determine whether this practice was associated with a significant decrease in the core temperature of infants; and (2) to identify significant risk factors associated with neonatal hypothermia. The core temperature of 227 randomly selected normal-term infants immediately before and after cleaning in labour rooms was measured with an infrared tympanic thermometer inserted into their left ears. Their mean post-cleaning body temperature (36.6 degrees C, SD = 1.0) was significantly lower than their mean pre-cleaning temperature (37.1 degrees C, SD = 1.0; p < 0.001). Logistic regression analysis showed that the risk factors significantly associated with pre-cleaning hypothermia (< 36.5 degrees C) were: (1) not being placed under radiant warmer before cleaning p = 0.03); and (2) lower labour room temperature (p < 0.001). Logistic regression analysis also showed that the risk factors significantly associated with post-cleaning hypothermia were: (1) lower labour room temperature (p < 0.001); (2) lower pre-cleaning body temperature (p < 0.001); and (3) longer duration of cleaning (p = 0.002). In conclusion, to prevent neonatal hypothermia, labour room temperature should be set at a higher level and cleaning infants in the labour room should be discouraged.
    Matched MeSH terms: Body Temperature; Cold Temperature/adverse effects*
  20. Heat inactivation of hepatitis A virus in dairy foods
    Bidawid S, Farber JM, Sattar SA, Hayward S
    J Food Prot, 2000 Apr;63(4):522-8.
    PMID: 10772219
    Experiments were performed to determine the thermal resistance of hepatitis A virus (HAV) in three types of dairy products containing increased amounts of fat content (skim milk, homogenized milk; 3.5% MFG, and table cream; 18% MFG). HAV-inoculated dairy products were introduced into custom-made U-shaped microcapillary tubes that in turn were simultaneously immersed in a waterbath, using custom-made floating boats and a carrying platform. Following exposure to the desired time and temperature combinations, the contents of each of the tubes was retrieved and was tested by plaque assay to determine the reduction in virus titer. Our data indicated that < 0.5 min at 85 degrees C was sufficient to cause a 5-log reduction in HAV titer in all three dairy products, whereas at 80 degrees C, < or = 0.68 min (for skim and homogenized milk), and 1.24 min (for cream) were needed to cause a similar log reduction. Using a nonlinear two-phase negative exponential model (two-compartment model) to analyze the data, it was found that at temperatures of 65, 67, 69, 71, and 75 degrees C, significantly (P < 0.05) higher exposure times were needed to achieve a 1-log reduction in virus titer in cream, as compared to skim and homogenized milk. For example, at 71 degrees C, a significantly (P < 0.05) higher exposure time of 0.52 min (for cream) was needed as compared to < or = 0.18 min (for skim and homogenized milk) to achieve a 1-log reduction in virus titer. A similar trend of inactivation was observed at 73 and 75 degrees C where significantly (P < 0.05) higher exposure times of 0.29 to 0.36 min for cream were needed to cause a 1-log reduction in HAV in cream, as compared to < or = 0.17 min for skim and homogenized milk. This study has provided information on the heat resistance of HAV in skim milk, homogenized milk, and table cream and demonstrated that an increase in fat content appears to play a protective role and contributes to the heat stability of HAV.
    Matched MeSH terms: Hot Temperature*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links