Displaying publications 81 - 100 of 164 in total

Abstract:
Sort:
  1. Fulltext COSMO-RS Based Prediction for Alpha-Linolenic Acid (ALA) Extraction from Microalgae Biomass Using Room Temperature Ionic Liquids (RTILs)
    Rezaei Motlagh S, Harun R, Awang Biak DR, Hussain SA, Omar R, Elgharbawy AA
    Mar Drugs, 2020 Feb 12;18(2).
    PMID: 32059424 DOI: 10.3390/md18020108
    One of the essential fatty acids with therapeutic impacts on human health is known to be omega-3 polyunsaturated fatty acids (PUFA). More lately, ionic liquids (ILs) have received significant attention among scientists in overcoming the disadvantages of traditional solvents in biomass lipid extraction. However, the large pool of cations and anions possibly accessible will lead to a growing number of innovatively synthesized ILs. Nevertheless, the exhaustive measurement of all these systems is economically impractical. The conductive screening model for real solvents (COSMO-RS) is considered a precious approach with the availability of a few models to predict the characteristics of ILs. This work introduces the estimate of capacity values at infinite dilution for a range of ILs using COSMO-RS software as part of solid-liquid extraction. This favorable outcome presented that the capacity values of the IL molecules are extremely dependent on both anions and cations. Among the 352 combinations of cation/anion tested, short alkyl chain cations coupled with inorganic anions were found to be most efficient and therefore superior in the extraction method. Sulphate-, chloride-, and bromide-based ILs were found to have higher extraction capacities in contrast with the remainders, while propanoate revealed an extraordinary capacity when combined with ethyl-based cations. Eventually, the predicted results from COSMO-RS were validated through the experimentally calculated extraction yield of alpha-linolenic acid (ALA) compound from Nannochloropsis sp. microalgae. Three selected ILs namely [EMIM][Cl], [TMAm][Cl], and [EMPyrro][Br] were selected from COSMO-RS for empirical extraction purpose and the validation results pinpointed the good prediction capability of COSMO-RS.
    Matched MeSH terms: Cations/chemistry
  2. Fulltext Causes of low HbA1c in Malaysian university hospital
    Sthaneshwar P, Vethakkan SR, Wong CW
    Med J Malaysia, 2014 Aug;69(4):175-7.
    PMID: 25500845 MyJurnal
    INTRODUCTION: Glycohemoglobin (HbA1c) most accurately reflects the previous two to three months of glycaemic control. HbA1c should be measured regularly in all patients with diabetes, and values should be maintained below 7% to prevent the risk of chronic complications. Apart from the genetic variants of haemoglobins many other conditions also known to affect HbA1c measurements. In this study we evaluated the conditions that cause low HbA1c results.

    METHODS AND MATERIALS: The data was collected retrospectively HbA1c was measured in our laboratory by Biorad Variant II turbo 2.0. The method is based on chromatographic separation of HbA1c on a cation exchange cartridge. This method has been certified by National Glycohemoglobin Standardization Programme (NGSP). 58437 requests were received in a period of one year (January to December 2011). Medical records were reviewed to identify the conditions that might be associated with these low values.

    RESULTS: Among 58437 samples analysed, 53 patients had HbA1c levels < 4.0%. Fourteen patients had haemoglobinopathy. In 34 patients without Hb variants had conditions such as chronic liver disease, chronic kidney disease, haemolytic anaemia, pregnancy, and anaemia of chronic disease. Five non-pregnant individuals who were screened for diabetes mellitus had HbA1c levels < 4%.

    CONCLUSION: Our study underscores the importance of that both laboratories and the physicians should be aware of the factors that can influence the HbA1c results. The haematological status should be taken into consideration for proper interpretation of HbA1c results.
    Matched MeSH terms: Cations
  3. Cation dependence, pH tolerance, and dosage requirement of a bioflocculant produced by Bacillus spp. UPMB13: flocculation performance optimization through kaolin assays
    Zulkeflee Z, Aris AZ, Shamsuddin ZH, Yusoff MK
    ScientificWorldJournal, 2012;2012:495659.
    PMID: 22997497
    A bioflocculant-producing bacterial strain with highly mucoid and ropy colony morphological characteristics identified as Bacillus spp. UPMB13 was found to be a potential bioflocculant-producing bacterium. The effect of cation dependency, pH tolerance and dosage requirement on flocculating ability of the strain was determined by flocculation assay with kaolin as the suspended particle. The flocculating activity was measured as optical density and by flocs formation. A synergistic effect was observed with the addition of monovalent and divalent cations, namely, Na⁺, Ca²⁺, and Mg²⁺, while Fe²⁺ and Al³⁺ produced inhibiting effects on flocculating activity. Divalent cations were conclusively demonstrated as the best cation source to enhance flocculation. The bioflocculant works in a wide pH range, from 4.0 to 8.0 with significantly different performances (P < 0.05), respectively. It best performs at pH 5.0 and pH 6.0 with flocculating performance of above 90%. A much lower or higher pH would inhibit flocculation. Low dosage requirements were needed for both the cation and bioflocculant, with only an input of 50 mL/L for 0.1% (w/v) CaCl₂ and 5 mL/L for culture broth, respectively. These results are comparable to other bioflocculants produced by various microorganisms with higher dosage requirements.
    Matched MeSH terms: Cations, Divalent/chemistry*; Cations, Monovalent/chemistry*
  4. Simultaneous analysis of silicon and boron dissolved in water by combination of electrodialytic salt removal and ion-exclusion chromatography with corona charged aerosol detection
    Mori M, Sagara K, Arai K, Nakatani N, Ohira S, Toda K, et al.
    J Chromatogr A, 2016 Jan 29;1431:131-7.
    PMID: 26755416 DOI: 10.1016/j.chroma.2015.12.064
    Selective separation and sensitive detection of dissolved silicon and boron (DSi and DB) in aqueous solution was achieved by combining an electrodialytic ion isolation device (EID) as a salt remover, an ion-exclusion chromatography (IEC) column, and a corona charged aerosol detector (CCAD) in sequence. DSi and DB were separated by IEC on the H(+)-form of a cation exchange resin column using pure water eluent. DSi and DB were detected after IEC separation by the CCAD with much greater sensitivity than by conductimetric detection. The five-channel EID, which consisted of anion and cation acceptors, cathode and anode isolators, and a sample channel, removed salt from the sample prior to the IEC-CCAD. DSi and DB were scarcely attracted to the anion accepter in the EID and passed almost quantitatively through the sample channel. Thus, the coupled EID-IEC-CCAD device can isolate DSi and DB from artificial seawater and hot spring water by efficiently removing high concentrations of Cl(-) and SO4(2-) (e.g., 98% and 80% at 0.10molL(-1) each, respectively). The detection limits at a signal-to-noise ratio of 3 were 0.52μmolL(-1) for DSi and 7.1μmolL(-1) for DB. The relative standard deviations (RSD, n=5) of peak areas were 0.12% for DSi and 4.3% for DB.
    Matched MeSH terms: Cations
  5. Fulltext Effect of Extra-Framework Cations of LTL Nanozeolites to Inhibit Oil Oxidation
    Tan KH, Cham HY, Awala H, Ling TC, Mukti RR, Wong KL, et al.
    Nanoscale Res Lett, 2015 Dec;10(1):956.
    PMID: 26058517 DOI: 10.1186/s11671-015-0956-6
    Lubricant oils take significant part in current health and environmental considerations since they are an integral and indispensable component of modern technology. Antioxidants are probably the most important additives used in oils because oxidative deterioration plays a major role in oil degradation. Zeolite nanoparticles (NPs) have been proven as another option as green antioxidants in oil formulation. The anti-oxidative behavior of zeolite NPs is obvious; however, the phenomenon is still under investigation. Herein, a study of the effect of extra-framework cations stabilized on Linde Type L (LTL) zeolite NPs (ca. 20 nm) on inhibition of oxidation in palm oil-based lubricant oil is reported. Hydrophilic LTL zeolites with a Si/Al ratio of 3.2 containing four different inorganic cations (Li(+), Na(+), K(+), Ca(2+)) were applied. The oxidation of the lubricant oil was followed by visual observation, colorimetry, fourier transform infrared (FTIR) spectroscopy, (1)H NMR spectroscopy, total acid number (TAN), and rheology analyses. The effect of extra-framework cations to slow down the rate of oil oxidation and to control the viscosity of oil is demonstrated. The degradation rate of the lubricant oil samples is decreased considerably as the polarizability of cation is increased with the presence of zeolite NPs. More importantly, the microporous zeolite NPs have a great influence in halting the steps that lead to the polymerization of the oils and thus increasing the lifetime of oils.
    Matched MeSH terms: Cations
  6. New crown-shaped polyoxovanadium(V) cluster cation with a mu(6)-sulfato anion and zwitterionic mu-(beta-alanine): crystal structure of [V(6)O(12)(OH)(3)(O(2)CCH(2)CH(2)NH(3))(3)(SO(4))][Na][SO(4)].13H(2)O
    Ng CH, Lim CW, Teoh SG, Fun HK, Usman A, Ng SW
    Inorg Chem, 2002 Jan 14;41(1):2-3.
    PMID: 11782136
    Treatment of vanadium(V) oxide with an ethanol-concentrated sulfuric acid mixture, followed by the addition of an equimolar amount of beta-alanine and sodium hydroxide, and finally raising the pH to 3.9 with sodium carbonate solution, under continuous heating in a water bath and in the presence of air, leads to the polyionic sodium cyclo-[mu(6)-(sulfato-O,O',O'')tris[mu-(beta-alanine-O,O')-mu-oxo]tris(mu-hydroxo-mu-oxo)hexa[oxovanadium(V)]] sulfate tridecahydrate which crystallizes in the monoclinic P2(1)/n space group [a = 9.5192(4), b = 20.1185(9), c = 22.6174(9) A, beta = 97.011(1) degrees; Z = 4]. The crown-shaped polyoxovanadium(V) cluster cation, with carboxylate-bridging amino acid ligands, has an Anderson structure with two unique capping sulfato ligands. Its structural analysis, together with IR, UV-vis, and preliminary data on its solution properties, is presented.
    Matched MeSH terms: Cations
  7. Fulltext Integrated Stirred-Tank Bioreactor with Internal Adsorption for the Removal of Ammonium to Enhance the Cultivation Performance of gdhA Derivative Pasteurella multocida B:2
    Oslan SNH, Tan JS, Abbasiliasi S, Ziad Sulaiman A, Saad MZ, Halim M, et al.
    Microorganisms, 2020 Oct 24;8(11).
    PMID: 33114463 DOI: 10.3390/microorganisms8111654
    Growth of mutant gdhA Pasteurella multocida B:2 was inhibited by the accumulation of a by-product, namely ammonium in the culture medium during fermentation. The removal of this by-product during the cultivation of mutant gdhA P. multocida B:2 in a 2 L stirred-tank bioreactor integrated with an internal column using cation-exchange adsorption resin for the improvement of cell viability was studied. Different types of bioreactor system (dispersed and internal) with resins were successfully used for ammonium removal at different agitation speeds. The cultivation in a bioreactor integrated with an internal column demonstrated a significant improvement in growth performance of mutant gdhA P. multocida B:2 (1.05 × 1011 cfu/mL), which was 1.6-fold and 8.4-fold as compared to cultivation with dispersed resin (7.2 × 1010 cfu/mL) and cultivation without resin (1.25 × 1010 cfu/mL), respectively. The accumulation of ammonium in culture medium without resin (801 mg/L) was 1.24-fold and 1.37-fold higher than culture with dispersed resin (642.50 mg/L) and culture in the bioreactor integrated with internal adsorption (586.50 mg/L), respectively. Results from this study demonstrated that cultivation in a bioreactor integrated with the internal adsorption column in order to remove ammonium could reduce the inhibitory effect of this by-product and improve the growth performance of mutant gdhA P. multocida B:2.
    Matched MeSH terms: Cations
  8. Fulltext Simultaneous Adsorption of Cationic Dyes from Binary Solutions by Thiourea-Modified Poly(acrylonitrile-co-acrylic acid): Detailed Isotherm and Kinetic Studies
    Adeyi AA, Jamil SNAM, Abdullah LC, Choong TSY, Lau KL, Abdullah M
    Materials (Basel), 2019 Sep 08;12(18).
    PMID: 31500398 DOI: 10.3390/ma12182903
    In this study, simultaneous adsorption of cationic dyes was investigated by using binary component solutions. Thiourea-modified poly(acrylonitrile-co-acrylic acid) (TMPAA) polymer was used as an adsorbent for uptake of cationic dyes (malachite green, MG and methylene blue, MB) from aqueous solution in a binary system. Adsorption tests revealed that TMPAA presented high adsorption of MG and MB at higher pH and higher dye concentrations. It suggested that there are strong electrostatic attractions between the surface functional groups of the adsorbent and cationic dyes. The equilibrium analyses explain that both extended Langmuir and extended models are suitable for the description of adsorption data in the binary system. An antagonistic effect was found, probably due to triangular (MG) and linear (MB) molecular structures that mutually hinder the adsorption of both dyes on TMPAA. Besides, the kinetic studies for sorption of MG and MB dyes onto adsorbent were better represented by a pseudo-second-order model, which demonstrates chemisorption between the polymeric TMPAA adsorbent and dye molecules. According to experimental findings, TMPAA is an attractive adsorbent for treatment of wastewater containing multiple cationic dyes.
    Matched MeSH terms: Cations
  9. Quadrupole-Time-of-Flight Mass Spectrometric Identification of Hemoglobin Subunits α, β, γ and δ in Unknown Peaks of High Performance Liquid Chromatography of Hemoglobin in β-Thalassemias
    Abdullah UYH, Ibrahim HM, Mahmud NB, Salleh MZ, Kek TL, Noorizhab MNFB, et al.
    Hemoglobin, 2019 May;43(3):182-187.
    PMID: 31298599 DOI: 10.1080/03630269.2019.1632893
    This is the first report of quadrupole time-of-flight (Q-TOF) mass spectrometric identification of the hemoglobin (Hb) subunits, α, β, δ and γ peptides, derived from enzymatic-digestion of proteins in the early unknown peaks of the cation exchange chromatography of Hb. The objectives were to identify the unknown high performance liquid chromatography (HPLC) peaks in healthy subjects and in patients with β-thalassemia (β-thal). The results demonstrate the existence of pools of free globin chains in red blood cells (RBCs). The α-, β-, δ- and γ-globin peptides were identified in the unknown HPLC peaks. The quantification and role of the free globin pool in patients with β-thal requires further investigation. Identification of all types of Hb subunits in the retention time (RT) before 1 min. suggests that altered Hbs is the nature of these fast-eluting peaks. Relevancy of thalassemias to the protein-aggregation disorders will require review of the role of free globin in the pathology of the disease.
    Matched MeSH terms: Cations
  10. Fulltext Characteristics of unsafe deliveries in Malaysia: 2015 to 2017 [Abstract]
    Dahlan SA, Mohamed M
    Malaysian Journal of Medicine and Health Sciences, 2019;15(104):92-92.
    MyJurnal
    ABSTRACTS FOR INTERNATIONAL FAMILY HEALTH CONFERENCE 2019 (I-FaH 2019). Health Intervention Towards Community Wellness, Held at Oriental Crystal Hotel, Kajang, Selangor, Malaysia. 4-5th September, 2019
    Introduction: In Malaysia, the proportion of safe deliveries remains above 98% since 2010. Safe delivery is defined as deliveries conducted by trained personnel; either doctors, nurses with midwifery training or community nurses. Despite the good coverage of trained personnel and continuous effort to promote birth preparedness among antenatal mothers, unsafe delivery still occur in Malaysia and reported as 0.5% in NHMS 2016.
    Methods: A retrospective analysis on the characteristics of unsafe deliveries from the national surveillance data for the period of 2015 to 2017 was carried out. Characteristics of mothers are extracted from the reports of unsafe delivery investigation by Ministry of Health Malaysia and descriptive analyses are carried out by year for trending.
    Results: Total of 985 unsafe deliver-ies were reported and investigated in 2015, 1201 in 2016 and 1045 in 2017. About 37.7% to 49.9% (n=453-521) of these deliveries were among Malaysians followed by 22.9% to 40% (n=239-394) among non-citizen without identification document and 11.1% to 27.6% (109-332 deliveries) among non-citizen with identification document. It is commonly reported among mothers aged 26 to 35 years old (38.6% to 43.4%; n=454-463) and multiparous (47.3% to 52.0%; n=494-512). About 25.5% to 35.4% (n=251-370) of these mothers never attended antenatal check-up. Five main reported reasons which had contributed to the unsafe deliveries in 2015 to 2017 were; invalid identification documents, financial constraints, transportation problems, far distance from health facilities and mother’s personal choice.
    Conclusion: These findings translate into possible intervention targeted the above population on unsafe deliveries. Multi-sectoral strategies and inter-agency partnership are needed in strengthening the intervention.
    Matched MeSH terms: Cations
  11. Biomimetic amphiphilic chitosan nanoparticles: Synthesis, characterization and antimicrobial activity
    Ahmad N, Wee CE, Wai LK, Zin NM, Azmi F
    Carbohydr Polym, 2021 Feb 15;254:117299.
    PMID: 33357867 DOI: 10.1016/j.carbpol.2020.117299
    Naturally derived antimicrobial peptides (AMPs) are an attractive source of new antimicrobial agents. However, clinical application of AMPs is associated with poor bioavailability and toxicity. In this study, we address these limitations by designing a new series of chitosan derivatives to mimic the amphiphilic topology of AMPs. The synthesized chitosan derivatives were found to self-assemble into nanoparticles in the aqueous environment. Among the compounds, a chitosan derivative grafted with arginine and oleic acid (CH-Arg-OA) exhibited the most potent antimicrobial activity, especially against Gram-negative bacteria. It also caused minimal cell death when tested in HEK293 and HepG2 cell lines, thus confirming the role of cationicity and lipophilicity for selective bacteria targeting. CH-Arg-OA exhibited its antimicrobial activity by disrupting bacterial membranes and causing the leakage of cytoplasmic contents. Thus, amphiphilic chitosan nanoparticles offer a great promise as a new class of AMPs mimics that is effective against Gram-negative bacteria.
    Matched MeSH terms: Cations
  12. Fulltext Screening of Electrospray-operating Parameters in the Production of Alginate-Royal Jelly Microbeads Using Factorial Design
    Shaiqah MR, Salahuddin HM, Afiful Huda AYA, Izzuddin M, Nur Shafiq NIM, Nur Hakimah MA, et al.
    J Pharm Bioallied Sci, 2020 Nov;12(Suppl 2):S703-S706.
    PMID: 33828364 DOI: 10.4103/jpbs.JPBS_249_19
    Introduction: Royal jelly (RJ) has been consumed as food or as a supplement because of its high nutritional and medicinal values. A fresh harvested RJ is yellowish to whitish in color and contains proteins, free amino acids, lipids, vitamins, and sugar. Without proper storage conditions, such as at 4°C, the color of RJ changes to much darker yellow and produces a rancid smell. To prolong its shelf life, RJ is usually mixed with honey. Alginate, a natural and edible polymer derived from seaweed, is commonly used to encapsulate drugs and food due to its ability to form gels by reacting with divalent cations. However, there is a lack of research on the microencapsulation of RJ in alginate using electrospray. The electrospray technique has the advantage in producing consistent size and shape of alginate microbeads under optimum parameters.

    Aim: This research aimed to optimize electrospray-operating parameters in producing alginate-RJ microbeads.

    Materials and Methods: Optimization of alginate-RJ microbeads electrospray parameters was carried out using 24 factorial design with three center points (19 runs). The studied parameters were flow rate, high voltage, nozzle size, and tip-to-collector distance, whereas the responses were particle size, particle size distribution, and sphericity factor. The responses of each run were analyzed using Design-Expert software.

    Results: Nozzle size is a significant parameter that influences the particle size. Flow rate is a significant parameter influencing the sphericity factor.

    Conclusion: Screening of the electrospray-operating parameters paves the way in determining the significant parameters and their design space to produce consistent alginate-RJ microbeads.

    Matched MeSH terms: Cations, Divalent
  13. Fulltext Physicochemical properties and water quality parameter of paddy soil and water and their relationship with pesticides concentration
    Siti Zulfa Zaidon, Yu Bin Ho, Zailina Hashim, Nazamid Saari, Sarva Mangala Praveena
    Malaysian Journal of Medicine and Health Sciences, 2020;16(2):206-214.
    MyJurnal
    Introduction: Pesticides may influence the physicochemical properties of soil and the water quality parameters, which is vital in maintaining soil fertility and producing high quality crops. Objective: This study aims to determine the relationship between the concentration of pesticides, the physicochemical properties of the paddy soil samples and the water quality parameters of paddy water samples. Methods: A total of 72 soil and 72 water samples were collected in Tanjung Karang, Malaysia. The paddy soil and water were extracted using Quick, Easy, Cheap, Efficient, Rugged and Safe (QuEChERS) and solid phase extraction (SPE) techniques respectively. The concentrations of pesti- cides were analysed in ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS). The relationship of the concentration of target pesticides and the paddy soil and water physicochemical properties were studied using Spearman correlation. Results: In paddy soil, the concentration of propiconazole shows moderate positive correlation with manganese (Mn) (r = 0.587) (p 0.01). Meanwhile buprofezin-total organic carbon (TOC) (r = -0.55) (p 0.01), imidacloprid-cation exchange capacity (CEC) (r = -0.519) (p 0.01), pymetrozine-sodium (Na) (r = -0.588) (p 0.01), and trifloxystrobin-calcium (Ca) (r = 0.566) (p 0.01) showed moderate negative correlation. Whereas in water, trifloxystrobin showed significant positive correlation with turbidity (r = 0.718) (p 0.01) and te- buconazole showed negative correlation to dissolved oxygen (DO) (r = 0.634) (p 0.01). Conclusion: The presence of pesticides in paddy field may influence the soil and water quality, thus regular monitoring of pesticides usage and nutrient management in soil is deemed important.
    Matched MeSH terms: Cations
  14. Tea from the drinking to the synthesis of metal complexes and fabrication of PVA based polymer composites with controlled optical band gap
    Brza MA, Aziz SB, Anuar H, Ali F, Dannoun EMA, Mohammed SJ, et al.
    Sci Rep, 2020 Oct 22;10(1):18108.
    PMID: 33093604 DOI: 10.1038/s41598-020-75138-x
    In the present study black tea extract (BTE) solution which is familiar for drinking was used to prepare cerium metal-complexes (Ce(III)-complex). The prepared Ce(III)-complex was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and UV-Vis spectroscopy. The results indicate that BTE solution is a novel green coordination chemistry approach for the synthesis of metal complexes. The outcomes signify that coordination occurs between cerium cations and polyphenols. The synthesis of metal-complexes with superior absorption performance in the visible region is a challenge for optoelectronic device applications. The suspended Ce(III)-complex in distilled water was mixed with poly (vinyl alcohol) (PVA) polymer to fabricate PVA/ Ce(III)-complex composites with controlled optical properties. The PVA/Ce(III)-complexes composite films were characterized by FTIR, XRD, and UV-Vis spectroscopy. The XRD findings confirms the amorphous structure for the synthesized Ce(III)-complexes. The addition of Ce(III)-complex into the PVA host polymer led to the growth of polymer composites with controllable small optical band gaps. It is shown by the FTIR spectra of the composite films that the functional groups of the host PVA have a vigorous interaction with the Ce(III)-complex. The XRD deconvolution on PVA composites reveals the amorphous phase enlargement with increasing Ce(III)-complex concentration. It is indicated in the atomic force microscopy (AFM) that the surface roughness in the doped PVA films increases with the increase of the Ce(III)-complex. There is a decrease in absorption edge from 5.7 to 1.7 eV. It becomes possible to recognize the type of electron transition by studying both the Tauc's model and optical dielectric loss (ɛi) parameter.
    Matched MeSH terms: Cations
  15. Characterization of Microcrystalline Cellulose Isolated from Conocarpus Fiber
    Fouad H, Kian LK, Jawaid M, Alotaibi MD, Alothman OY, Hashem M
    Polymers (Basel), 2020 Dec 07;12(12).
    PMID: 33297332 DOI: 10.3390/polym12122926
    Conocarpus fiber is an abundantly available and sustainable cellulosic biomass. With its richness in cellulose content, it is potentially used for manufacturing microcrystalline cellulose (MCC), a cellulose derivative product with versatile industrial applications. In this work, different samples of bleached fiber (CPBLH), alkali-treated fiber (CPAKL), and acid-treated fiber (CPMCC) were produced from Conocarpus through integrated chemical process of bleaching, alkaline cooking, and acid hydrolysis, respectively. Characterizations of samples were carried out with Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDX), Fourier Transform Infrared-Ray (FTIR), X-ray Diffraction (XRD), Thermogravimetric (TGA), and Differential Scanning Calorimetry (DSC). From morphology study, the bundle fiber feature of CPBLH disintegrated into micro-size fibrils of CPMCC, showing the amorphous compounds were substantially removed through chemical depolymerization. Meanwhile, the elemental analysis also proved that the traces of impurities such as cations and anions were successfully eliminated from CPMCC. The CPMCC also gave a considerably high yield of 27%, which endowed it with great sustainability in acting as alternative biomass for MCC production. Physicochemical analysis revealed the existence of crystalline cellulose domain in CPMCC had contributed it 75.7% crystallinity. In thermal analysis, CPMCC had stable decomposition behavior comparing to CPBLH and CPAKL fibers. Therefore, Conocarpus fiber could be a promising candidate for extracting MCC with excellent properties in the future.
    Matched MeSH terms: Cations
  16. Improvement of trigeminal neuralgia after massage therapy and dry needling
    Wan Adnan Wan Omar, Nur Liana Abu Bakar
    Malaysian Journal of Medicine and Health Sciences, 2020;16(102):81-83.
    MyJurnal
    Trigeminal neuralgia is a debilitating disease that can lead to depression and even suicide. Trigeminal neuralgia is usually treated using carbamazepine; however, many patients are refractory to such medical treatment. Thus, other treatment modalities are required, such as physical treatment and dry needling. The objective of this case report is to describe the management of trigeminal neuralgia in a 35 years old Malay housewife, who had left side atypical trigeminal neuralgia involving V2 region in the last four years, which was refractory to medical treatment. The appli- cation of Malay massage, combined with dry needling executed along the distribution of trigeminal nerve showed an improvement of pain on the Visual Analog Scale (VAS) from 7–8/10 to 0-1/10 after 11 sessions. Therefore, Malay massage combined with dry needling can be used as a non-pharmaceutical approach to managing trigeminal neu- ralgia.
    Matched MeSH terms: Cations
  17. Zwitterion composite chitosan-epichlorohydrin/zeolite for adsorption of methylene blue and reactive red 120 dyes
    Jawad AH, Abdulhameed AS, Reghioua A, Yaseen ZM
    Int J Biol Macromol, 2020 Nov 15;163:756-765.
    PMID: 32634511 DOI: 10.1016/j.ijbiomac.2020.07.014
    In this research, an attempt to develop zwitterion composite adsorbent is conducted by modifying chitosan (CHS) with a covalent cross-linker (epichlorohydrin, ECH) and an aluminosilicate mineral (zeolite, ZL). The zwitterion composite adsorbent of chitosan-epichlorohydrin/zeolite (CHS-ECH/ZL) is performed multifunctional tasks by removing two structurally different cationic (methylene blue dye, MB), and anionic (reactive red 120 dye, RR120) dyes from aqueous solutions. The surface property, crystallinity, morphology, functionality, and charge of the CHS-ECH/ZL are analyzed using BET, XRD, SEM, FTIR, and pHpzc, analyses, respectively. The influence of pertinent parameters namely CHS-ECH/ZL dosage (0.02-0.5 g), solution pH (4-10), temperature (303-323K), initial dye concentration (30-400 mg/L), and contact time (0-600 min) on the MB and RR120 removal are tested. The research findings revealed that the adsorption isotherm at equilibrium well explained in according to the Freundlich isotherm model, and the recorded adsorption capacities of CHS-ECH/ZL are 156.1 and 284.2 mg/g for MB and RR120 respectively at 30 °C. The mechanism of MB and RR120 adsorption onto the CHS-ECH/ZL indicates various types of interactions namely, electrostatic interaction, hydrogen bonding, and Yoshida H-bonding in addition to n-π interaction. Overall, this research introduces CHS-ECH/ZL composite as an eco-friendly zwitterion adsorbent with good applicability towards the two structurally different cationic and anionic dyes from aqueous environment.
    Matched MeSH terms: Cations
  18. Mechanistic insights into carbon dioxide utilization by superoxide ion generated electrochemically in ionic liquid electrolyte
    Halilu A, Hayyan M, Aroua MK, Yusoff R, Hizaddin HF
    Phys Chem Chem Phys, 2021 Jan 21;23(2):1114-1126.
    PMID: 33346756 DOI: 10.1039/d0cp04903d
    Understanding the reaction mechanism that controls the one-electron electrochemical reduction of oxygen is essential for sustainable use of the superoxide ion (O2˙-) during CO2 conversion. Here, stable generation of O2˙- in butyltrimethylammonium bis(trifluoromethylsulfonyl)imide [BMAmm+][TFSI-] ionic liquid (IL) was first detected at -0.823 V vs. Ag/AgCl using cyclic voltammetry (CV). The charge transfer coefficient associated with the process was ∼0.503. It was determined that [BMAmm+][TFSI-] is a task-specific IL with a large negative isovalue surface density accrued from the [BMAmm+] cation with negatively charged C(sp2) and C(sp3). Consequently, [BMAmm+][TFSI-] is less susceptible to the nucleophilic effect of O2˙- because only 8.4% O2˙- decay was recorded from 3 h long-term stability analysis. The CV analysis also detected that O2˙- mediated CO2 conversion in [BMAmm+][TFSI-] at -0.806 V vs. Ag/AgCl as seen by the disappearance of the oxidative faradaic current of O2˙-. Electrochemical impedance spectroscopy (EIS) detected the mechanism of O2˙- generation and CO2 conversion in [BMAmm+][TFSI-] for the first time. The EIS parameters in O2 saturated [BMAmm+][TFSI-] were different from those detected in O2/CO2 saturated [BMAmm+][TFSI-] or CO2 saturated [BMAmm+][TFSI-]. This was rationalized to be due to the formation of a [BMAmm+][TFSI-] film on the GC electrode, creating a 2.031 × 10-9 μF cm-2 double-layer capacitance (CDL). Therefore, during the O2˙- generation and CO2 utilization in [BMAmm+][TFSI-], the CDL increased to 5.897 μF cm-2 and 7.763 μF cm-2, respectively. The CO2 in [BMAmm+][TFSI-] was found to be highly unlikely to be electrochemically converted due to the high charge transfer resistance of 6.86 × 1018 kΩ. Subsequently, O2˙- directly mediated the CO2 conversion through a nucleophilic addition reaction pathway. These results offer new and sustainable opportunities for utilizing CO2 by reactive oxygen species in ionic liquid media.
    Matched MeSH terms: Cations
  19. Fulltext Relative proteome quantification of alpha, beta, gamma and delta globin chains in early eluting peaks of Bio-Rad variant II® CE-HPLC of hemoglobin from healthy and beta-thalassemia subjects in Malaysia
    Abdullah UYH, Ibrahim HM, Jassim HM, Salleh MZ, Kek TL, Fakhruzzaman Bin Noorizhab MN, et al.
    Biochem Biophys Rep, 2019 Jul;18:100635.
    PMID: 31061897 DOI: 10.1016/j.bbrep.2019.100635
    This is the first report of QQQ-mass spectrometric identification and quantification of the Hb subunits, alpha, beta, delta and gamma globin peptides, derived from enzymatic-digestion of proteins in the early unknown peaks of the Bio-Rad cation-exchange chromatography of haemoglobin. The objectives were to assess the relationship of the quantity of the free alpha, beta, delta and gamma globin chains with the phenotypic diversity of beta-thalassaemias (β-thal). The results demonstrate that the pools of free globin chains in red blood cells were correlating with the severity of the disease in patients with different phenotypes of β-thal. The mechanism and the regulation of synthesis of free globin chains pool in a normal individual and in patients with different β-thal phenotypes could arise from several mechanisms which will require further investigation. The role of the free globin pool in patients with β-thal for development of novel therapeutic approaches based on these potential targets requires further investigation. Pertinent biomarkers improves the diagnosis of the β-thal, especially in low-income countries where they are most common and allows more effective therapeutic intervention leading to more successful therapeutic outcome.
    Matched MeSH terms: Cations
  20. Fulltext Efficacy of selected purification techniques for bromelain
    Nadzirah, K.Z., Zainal, S., Noriham, A., Normah, I.
    International Food Research Journal, 2013;20(1):43-46.
    MyJurnal
    Bromelain is one of the vegetal proteases found in pineapple plant. It has numerous applications in food and pharmaceuticals. This review discussed different bromelain purification techniques which will assist in determining the effect of processing conditions on the purification efficacy. There are four purification techniques to be discussed, namely; reverse micellar system, aqueous two phase extraction, cation exchange chromatography and ammonium sulphate precipitation. Of the four techniques, cation exchange chromatography had shown the best bromelain purification technique with purification fold of 10.0 followed by reverse micellar system containing CTAB/ isooctane/ hexanol/ butanol, ATPE containing PEG polymer, ammonium sulphate precipitation and ATPE containing PEO-PPO-PEO with purification fold of 5.2, 4.0, 2.81 and 1.25, respectively.
    Matched MeSH terms: Cations
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links