Displaying publications 81 - 100 of 138 in total

Abstract:
Sort:
  1. Hisham A, Abd Latib M, Basiron N
    Case Rep Surg, 2017;2017:3491012.
    PMID: 28255494 DOI: 10.1155/2017/3491012
    Juvenile hypertrophy of the breast (JHB) is a rare and relentless disease affecting women in the peripubertal period. We present a 13-year-old girl with massive bilateral JHB, successfully treated with a breast reduction and free nipple graft technique. A total of 7300 grams of breast tissue had been removed, accounting for 14.9% of the patient's total body weight. Prophylactic hormonal therapy was not commenced. During the 5-year follow-up period, there was no recurrence and the patient remains satisfied with the aesthetic outcome. A recent meta-analysis study indicates that subcutaneous mastectomy is associated with reduced risk of recurrence, but it is more deforming and the aesthetic result is inferior to a reduction mammaplasty. In patients treated with the latter technique, some evidence exists suggesting that the use of a free nipple graft is associated with a less frequent risk of recurrence than a pedicle technique. This present case is unique as it demonstrates the clinical course of this patient at a considerably longer follow-up period than most reported studies. We adhered to the limited available evidence and highlight the long-term reliability of breast reduction with free nipple grafting as the first line surgical option in JHB, eliminating the need for repeated surgeries.
    Matched MeSH terms: Esthetics
  2. Shahbudin Saad, Fikri Ahmad Khodzori
    MyJurnal
    The number of endangered coral species is increasing over the past decades due to multiple stresses and threats. Euphylliidae corals are among the species heavily targeted for the marine aquarium trade due to their colourful appearance and aesthetic importance. However, their distribution in Peninsular Malaysia has not been thoroughly investigated. Present study aims to investigate the diversity and abundance patterns of euphylliid species at 36 reef sites in Marine Protected Areas of Tioman, Redang and Payar Islands. Video transect surveyed a total of 671 euphylliids individuals belonging to six species from three genera. The diversity and evenness indices of euphylliids were significantly higher (P
    Matched MeSH terms: Esthetics
  3. Garg R, Mishra N, Alexander M, Gupta SK
    Ann Maxillofac Surg, 2017 Jul-Dec;7(2):237-244.
    PMID: 29264292 DOI: 10.4103/ams.ams_87_17
    Introduction: With introduction of the term "ossteointegration of dental implant" by Branemark, advancement in implantology from 1957 to 2017 has come a long way with modification in implant type and in loading time. This study aims to evaluate the survival of endo-osseous immediate loading (IL) implant and basal IL implants in atrophic jaws with objective to compare implant survival in atrophic jaws for full mouth rehabilitation between endo-osseous IL versus endo-osseous delayed loading (DL) versus basal IL during 3-year follow-up.

    Materials and Methods: Fifty-two (34 endo-osseous and 18 basal) implants were placed in 4 patients requiring full mouth rehabilitation in atrophic jaws. Case 1: Endo-osseous DL implants in upper and lower arch, Case 2: Endo-osseous IL implants in upper and lower arch, Case 3: Basal IL implant in upper and lower arch, and Case 4: Endo-osseous DL in upper arch and basal IL implant in the lower arch. Intraoperative evaluation was done on the basis of pain (visual analog scale [VAS]), operative time, and initial primary implant stability. Postoperative evaluation was done on pain (VAS), infection, radiographically successful implant (orthopantomogram), and patient satisfaction (Grade 0-10).

    Results: All cases showed satisfactory results but more amount of intra- and post-operative pain was felt with immediate basal implants.

    Conclusion: We believe that clinicians should comply with patient requests, and for this reason, we agree with some authors to use minimally invasive techniques and to avoid when possible esthetic or functional problems associated with the use of removable prosthesis after teeth extractions.
    Matched MeSH terms: Esthetics
  4. Samer MS, Faraz Q, Al-Dubai SAR, Vohra F, Abdullah H, Taiyeb-Ali TB, et al.
    Med Princ Pract, 2017;26(5):470-479.
    PMID: 28965115 DOI: 10.1159/000481864
    OBJECTIVES: The aim of this study was to determine the clinical outcomes and predictors of satisfaction in patients with lithium disilicate (LD) ceramic crowns.

    SUBJECTS AND METHODS: Clinical outcomes were assessed in 47 patients with 88 LD crowns using modified United States Public Health Service (USPHS) evaluation criteria and survival rates. The questionnaire for predictors included 3 aspects: (a) sociodemographic characteristics, (b) oral health habits (tooth brushing frequency, flossing frequency, and dental visits), and (c) satisfaction of the restorations (aesthetics, function, fit, cleansability, and chewing ability of the crowns, and overall satisfaction). Frequency distributions were computed using univariate and multivariate analysis. The Student t test and analysis of variance (ANOVA) were used to compare means across variables. Correlation analysis was done to assess the association between continuous variables.

    RESULTS: The age of crowns was 34.7 ± 9.7 months. The survival rate was 96.6% at 35.9 ± 9.2 months. There was a significant association between successful crown function and oral hygiene measures: tooth brushing (p˂ 0.001), dental visits (p = 0.006), and flossing (p = 0.009). A strong negative correlation was observed between aesthetic satisfaction (r = -0.717, p˂ 0.001) and chewing ability (r = -0.639, p˂ 0.001) with crown age. The linear regression model was significant for all predictors (p < 0.05) except overall satisfaction (p > 0.05).

    CONCLUSION: The LD crowns had long survival rates of 96.6% up to 35.9 ± 9.2 months and provided satisfactory clinical performance (low risk of failure). Oral hygiene habits such as brushing, flossing, and regular dental visits influenced patient satisfaction with LD crowns.

    Matched MeSH terms: Esthetics, Dental
  5. Rath A, Fernandes BA, Sidhu P, Ramamurthy P
    J Indian Soc Periodontol, 2018 2 15;21(3):245-248.
    PMID: 29440795 DOI: 10.4103/jisp.jisp_221_17
    New and innovative surgical techniques are necessary to help the clinician ensure the best results and satisfy patient's expectations. One such periodontal problem that has been challenging to the dental practitioners and impacts the oral health quality of life of patients has been gingival recession. When present anteriorly where esthetics is a major concern, patient centric parameters too become paramount. Root coverage esthetic score (RES) evaluation helps to keep the patient outcomes in mind. This case reports the successful treatment of a wide anterior mucogingival defect using epithelial embossed connective tissue graft which was evaluated for the first time using RES.
    Matched MeSH terms: Esthetics
  6. Mohamed AM, Wong KH, Lee WJ, Marizan Nor M, Mohd Hussaini H, Rosli TI
    Saudi Dent J, 2018 Apr;30(2):142-150.
    PMID: 29628737 DOI: 10.1016/j.sdentj.2017.12.001
    Aim: The aim of the study was to evaluate the effect of resin infiltration on colour changes and surface roughness of artificial white spot lesions (WSLs) on maxillary and mandibular premolar.

    Materials and methods: Sixty (60) extracted sound Maxilla (Mx) and Mandibular (Mn) premolars were randomly divided into 2 groups (test and control). Artificial WSLs were produced on buccal surface of teeth and were immersed in artificial saliva for 8 weeks. Colour components (L∗, a∗, b∗) and surface roughness (Sa∗) were assessed on 40 teeth using colour difference meter RD-100 and Alicona® Infinite Focus profilometer respectively. The measurements were done at baseline (T1), directly after artificial WSLs (T2), after 24 hours immersed in saliva and application of resin (T3) and immersion in artificial saliva for 1 (T4), 2 (T5), 4 (T6), 6 (T7) and 8 (T8) weeks. SEM images analysis were carried out on 20 teeth in four time points.

    Results: The values of L∗ (lightness), b∗ (yellow/blue) and Sa∗ (surface roughness) are gradually reduced to the baseline value. Whereas, the value of a∗ gradually increased with distinct treatment time to achieve the baseline value. The higher value of L∗ and Sa∗, the whiter the lesion suggesting higher degree of enamel demineralization and surface roughness. Lower L∗ values suggest a masking colour effect.

    Conclusion: The material produced favorable esthetics on colour and the surface roughness of teeth at distinct treatment times. It is recommended to be used to improve WSL post orthodontic treatment.

    Matched MeSH terms: Esthetics
  7. Chee HT, Wan Bakar WZ, Ghani ZA, Amaechi BT
    Dent Res J (Isfahan), 2018 6 21;15(3):215-219.
    PMID: 29922341
    Background: Composite resin (CR) currently is one of the most commonly used material in restoring noncarious cervical lesions (NCCL) due to its strength and esthetics color but has microleakage problem. The aim of this study is to compare in vitro the microleakage depth between CR and porcelain in restoring NCCL.

    Materials and Methods: This an in vitro study was done by preparing cavities on the buccocervical surface of 62 extracted premolar teeth which randomly assigned to two groups (n = 31) where Group 1 was restored with nanocomposite and Group 2 was cemented with porcelain cervical inlays. They were then subjected to thermocycling before immersion in 2% methylene blue dye for 24 h. Dye penetration depths were measured using Leica imaging system For statistical analysis, independent t-test was used to analyze the results (P < 0.05).

    Results: Porcelain cervical inlay restorations demonstrated statistically lesser microleakage depth for the cervical margins (P = 0.018) when compared to CR. Deeper microleakage depth at the cervical compared to coronal margins of CR (P = 0.006) but no significant difference of both margins for porcelain cervical inlays (P = 0.600).

    Conclusion: Porcelain cervical inlays show lesser microleakage than CR which could be alternative treatment option in restoring NCCL with better marginal seal and esthetics.

    Matched MeSH terms: Esthetics
  8. Packiriswamy V, Kumar P, Bashour M
    Facial Plast Surg, 2018 Aug;34(4):400-406.
    PMID: 29723879 DOI: 10.1055/s-0038-1648224
    In oculoplastic operations, knowledge of the dimensions of periorbital features based on age, gender, and race is essential for achieving better aesthetic result. This article seeks to determine the racial and gender differences of periorbital features among Malaysian Malay (MM), Malaysian Indian (MI), and Malaysian Chinese (MI) subjects. Evaluation of periorbital features was done on photographs of 200 MM, 200 MI, and 200 MC subjects, aged 18 to 26 years. The measured values were evaluated by an independent t-test. A significant difference was found between MM and MI in all measurements except interbrow distance in males, eyebrow thickness in females, and apex to lateral limbus distance in both sexes. Between MI and MC the difference was insignificant for interbrow distance in male groups, apex to lateral limbus distance in females, and palpebral fissure inclination and eyebrow apex angle in both sexes. Between MM and MC, significant differences were found for eyebrow thickness and medial canthus tilt in female group. Male groups showed significant difference for apex to lateral limbus and lateral canthus distance and eyebrow apex angle. Eyebrow height, palpebral fissure width, and intercanthal distance were significantly different in both sexes. Sexual dimorphism was found for all measurements in MI, but MM and MC showed insignificant difference for eyebrow apex angle. Four types of epicanthus were observed in MM and MC and three types in MI. Eyebrow apex between lateral limbus and lateral canthus was the most common position in all racial groups. Significant racial and gender differences exist for certain periorbital measurements. The knowledge of these differences is expected to influence the surgical outcome.
    Matched MeSH terms: Esthetics
  9. Nimbalkar S, Oh YY, Mok RY, Tioh JY, Yew KJ, Patil PG
    J Prosthet Dent, 2018 Aug;120(2):252-256.
    PMID: 29551374 DOI: 10.1016/j.prosdent.2017.10.021
    STATEMENT OF PROBLEM: Buccal corridor space and its variations greatly influence smile attractiveness. Facial types are different for different ethnic populations, and so is smile attractiveness. The subjective perception of smile attractiveness of different populations may vary in regard to different buccal corridor spaces and facial patterns.

    PURPOSE: The purpose of this study was to determine esthetic perceptions of the Malaysian population regarding the width of buccal corridor spaces and their effect on smile esthetics in individuals with short, normal, and long faces.

    MATERIAL AND METHODS: The image of a smiling individual with a mesofacial face was modified to create 2 different facial types (brachyfacial and dolicofacial). Each face form was further modified into 5 different buccal corridors (2%, 10%, 15%, 22%, and 28%). The images were submitted to 3 different ethnic groups of evaluators (Chinese, Malay, Indian; 100 each), ranging between 17 and 21 years of age. A visual analog scale (50 mm in length) was used for assessment. The scores given to each image were compared with the Kruskal-Wallis test, and pairwise comparison was performed using the Mann-Whitney U test (α=.05).

    RESULTS: All 3 groups of evaluators could distinguish gradations of dark spaces in the buccal corridor at 2%, 10%, and 28%. Statistically significant differences were observed among 3 groups of evaluators in esthetic perception when pairwise comparisons were performed. A 15% buccal corridor was found to score esthetically equally within 3 face types by all 3 groups of evaluators. The Indian population was more critical in evaluation than the Chinese or Malay populations. In a pairwise comparison, more significant differences were found between long and short faces and the normal face; the normal face was compared with long and short faces separately.

    CONCLUSIONS: The width of the buccal corridor space influences smile attractiveness in different facial types. A medium buccal corridor (15%) is the esthetic characteristic preferred by all groups of evaluators in short, normal, and long face types.

    Matched MeSH terms: Esthetics, Dental*
  10. Alammar A, Heshmeh O, Mounajjed R, Goodson M, Hamadah O
    J Esthet Restor Dent, 2018 11;30(6):523-531.
    PMID: 30412347 DOI: 10.1111/jerd.12433
    AIM: The aim of this study was to evaluate and compare conventional and modified lip repositioning surgical techniques used for management of gummy smile involving hyperactive lip elevator muscles.

    METHODS AND MATERIALS: A prospective study was conducted between April 2016 and May 2017. Twenty two adult patients aged 18-38 years with gummy smile ranging from 4 to 6 mm because of soft tissue disorders were included in the study. All patients were treated in the oral and maxillofacial department at Damascus University. The sample was divided into two groups of 11 patients. The first group was treated by the conventional standard technique, and the second group treated by a modified study technique. The amount of gingival display in full smile was evaluated in both groups following each intervention.

    RESULTS: Both groups exhibited a statistically significant reduction in the measurement of gummy smile at month 1 and 6 postoperatively (P  .05). The recent study showed a significant difference in gingival display between 3 and 6 months postoperatively in group 1, but no significant difference in group 2.

    CONCLUSION: This study showed that the modified technique utilized in treating gummy smile has less relapse after surgery, shows excellent cosmesis and compared to the conventional technique, greater sustainability.

    CLINICAL SIGNIFICANCE: The recent increase in demand for an esthetic smile has led to the development a modification of conventional lip repositioning for correcting gummy smile by myotomy of lip elevator muscles. This modified technique offers less relapse and greater stability post-operatively than the conventional technique.

    Matched MeSH terms: Esthetics, Dental*
  11. Jamayet NB, Rahman AM, Nizami MMUI, Johari Y, Husein A
    Indian J Dent Res, 2018 12 28;29(6):840-843.
    PMID: 30589017 DOI: 10.4103/ijdr.IJDR_20_17
    Exenteration surgery greatly affects a person in terms of function, esthetics, and psychological trauma. In such cases, restoration by silicone orbital prosthesis is a well-accepted treatment option. However, this is a difficult task, necessitating personalized design of method for each patient. This case report describes the technique for fabrication of a silicone orbital prosthesis for a male patient with left orbital defect due to exenteration of a Grade 3 squamous cell carcinoma of the left eye and surrounding tissues. The patient was delivered with a satisfactory silicone orbital prosthesis having good retention and finish. Multidisciplinary management and team approach are crucial in providing precise and effective rehabilitation for improving the patient's quality of life and help them return to their normal social life.
    Matched MeSH terms: Esthetics
  12. Mohd Nor H, Harun NA
    Case Rep Dent, 2018;2018:3230983.
    PMID: 30647975 DOI: 10.1155/2018/3230983
    The prevalence of dental erosion among children and adolescents is trending higher in recent decades and is becoming a major concern. Dental erosion can be caused by either extrinsic or intrinsic acids or both. One of the established aetiological factors for dental erosion by intrinsic acid is the gastrooesophageal reflux disease. The degree of dental erosions may be influenced by any medical conditions that cause a reduction in salivary flow such as the salivary gland excision, autoimmune disease, radiation to the head and neck regions, and medications. If left untreated, the dental erosion can cause dentine hypersensitivity, loss of occlusal vertical height, and aesthetic problems. For effective management of dental erosion, the aetiology of each case must be determined, and its detection at an early stage is of prime importance. This case report illustrates the conservative management of dental erosion in two adolescent patients presented with their medical conditions and behaviour issues. The aim of the treatments was to preserve the vitality of the affected teeth. The treatments were successfully completed using a conservative approach, with the patients' medical conditions taken into consideration.
    Matched MeSH terms: Esthetics
  13. Sekeli R, Hamid MH, Razak RA, Wee CY, Ong-Abdullah J
    Front Plant Sci, 2018;9:1380.
    PMID: 30279695 DOI: 10.3389/fpls.2018.01380
    Carica papaya L. or commonly known as papaya, is a major tropical crop consumed worldwide either as a vegetable or fresh fruit or processed products. In Malaysia, papaya was initially planted as a smallholder crop throughout the country. Eventually after 15 years of breeding and selection, a new variety, named C. papaya L. var. Eksotika, was released by the Malaysian Agricultural Research and Development Institute (MARDI) in 1987. This event changed the outlook of papaya planting from a smallholder crop to a plantation crop. Despite the blooming papaya business, the industry faced various disease issues that jeopardize its future. The most devastating was the papaya dieback disease, which affected approximately 800 hectares of plantation, destroyed approximately 1 million trees nationwide with total losses estimated at US$ 58 million. Even though Eksotika is a favored commercial variety with good eating and aesthetic quality fruit, its potential for more lucrative distant markets is tarnished with its short-shelf life fruits. Several strategies had been reported to address the challenges faced by Eksotika specifically against the dieback disease and the fruit's short shelf-life. This review focuses on C. papaya L. var. Eksotika particularly on the strategies to address the challenges faced in order to sustain the economic value of this crop plant, which had contributed significantly to the Malaysian economy.
    Matched MeSH terms: Esthetics
  14. SAUD AMERROUF SIAN, TERRY LUCAS
    MyJurnal
    When we heard Retro design, people will think about the fashion, music, poster, style and trend of the 1940s to1980s. The trend retro-futurism, however, is entirely different. It is a trend that was created by writers, artists and film directors in the past and is closely related to science fiction. This research concentrates on investigating the characteristics of retro-futurism and how it can be used to incorporate its features into building design for 3D animation. An exploratory method was used to analyse the architectural design of the past. The gathered information could give some insights and understanding of what retro-futurism is and the reason behind why the architectural design in the previous era was created that way. The process and challenges of implementing retro-futurism visual style are also discussed. As the result of the collected data, developing a design with the aesthetic of retro-futurism become more accessible and well-planned.
    Matched MeSH terms: Esthetics
  15. Mugilan Muralitharan, Syed Ahmad Helmi, Kamarulafizam Ismail, Azanizawati Ma'aram
    MyJurnal
    Aesthetic value of the automotive car seat has been one of the selling points of each car besides
    providing functions such as being safe, supportive as well provides comfort to the occupants. Other
    criteria considered besides the aesthetic element are cushion foam and self-adjustment factor.
    Ergonomics is not a new issue because most of the existing seat design today have already practiced it.
    Existing car seat manufacturers have considered anthropometry data. The average upon 95th percentile of
    human measurement had been deliberated. However, issues such as time spent driving and seat design
    issue have arisen upon the search of comfort and rising of musculoskeletal disease such as back pain. As a
    solution, this study would propose an automotive car seat design of ergonomic evolution, which would
    create comfort by manipulating the seat cushion foams. The proposed seat cushion foam would be use to
    replace the existing polymers with beanbag foam. This is inspire by the nature of beanbag, fitting up and
    providing comfort to the occupants of various body sizes and shapes. Malaysian anthropometry
    measurements are required for design of car seat, which later compared with the existing seats of
    commercial vehicle. The literature review showed the pressure mapping technique of respondent seating
    on the existing car seat. The most sensitive compartments where discomfort are experienced studied and
    placed with sachets filed with beanbag beads. This experiment conducted many times over a few
    respondents by using the pressure mat to find out, if there are any changes in terms of comfort. This
    design of new car seat with a manipulation cushion foam replaced with beanbag foam could be a niche to
    eliminate discomfort to all range body sizes and shapes.
    Matched MeSH terms: Esthetics
  16. Fazlena Abd. Rahim, Norsidah Ujang, Mohamed Mohamed Tolba Said
    MyJurnal
    The lack of understanding of Islamic principles in the design of public spaces has led to
    the weakness of the function, aesthetic value and the identity of urban places. The study
    seeks to identify the characteristics and elements of the Islamic urban space in
    Putrajaya base on publics and expert perception and preference. A questionnaire
    survey was conducted with approximately 500 civilians to analyse the public perception
    of Putra Square and Astaka Moroco. A photo base interview was carried out with
    approximately 100 professionals in the built environment field to evaluate the quality
    of Astaka Moroco in comparison to Islamic gardens in the Middle East based on their
    perception. The results indicate that the style of the Dataran Putra is the most preferred
    by the public compared to the Astaka Morocco. The professionals inform that Astaka
    Morocco is not comparable to the quality of Islamic gardens in the Middle East either
    in terms of function or aesthetic value due to the lack of understanding of the Islamic gardens elements and principles. In addition, the public liked the Islamic garden style
    that reflects the local identity and the functions as public spaces instead of just as an
    exhibit or a model. The findings can be a good guide in designing the Islamic public
    spaces which are favoured by the public.
    Matched MeSH terms: Esthetics
  17. Naziah Md Jasin, Fatanah Mohamad Suhaimi, Ahmad Fairuz Omar, Husniyati Roslan
    MyJurnal
    Discolouration of microhybrid composite resin is a common problem faced by both dental practitioners and patients. The accumulation of plaque, penetration of colourant particles from foods and beverages, dietary habits and the smoothness of restorations have been known to influence the quality of the aesthetic restoration. The purpose of this study was to determine the effects of polishing systems on surface roughness that led to discolouration of the microhybrid composite resin. Methods: Forty five samples of microhybrid composite resin (Filtex Z100) restorations were polished with two different polishing systems; one-step polishing (OP) system on the distal surface and multiple-step polishing (MP) system on the mesial surface. All samples were then immersed in two common beverages: black coffee and cocoa, for 20 minutes daily throughout 28 days of the experimental period. Results: Data on visual colour measurement and spectrometer colour spectrum was subjected to one-way ANOVA test at a significance level of 0.05. Both solutions were found to cause a significant colour change (p=0.0195) on the microhybrid composite resin. Black coffee solution obtained the highest score (71.6) of visual colour change and the lowest reflectance value (62.818) on the distal surface. Surface roughness evaluation using a scanning electron microscope (SEM) had presented that both polishing systems used produced low level of surface roughness. Conclusion: Although MP system produced a smoother surface compared to OP system, a prolonged exposure to colourant particle found to cause an unacceptable discolouration of microhybrid composite resin.
    Matched MeSH terms: Esthetics
  18. Lishen W, In Meei T, Marny Mohamed A, Abdullah D
    Iran Endod J, 2018;13(3):403-406.
    PMID: 30083215 DOI: 10.22037/iej.v13i3.20871
    The principle of ferrule effect is of prime importance when restoring an endodontically treated tooth. A severely broken down tooth due to subgingival caries almost always end up with extraction as inadequate ferrule effect would compromise the predictability of restorative treatment. This clinical case report describes a treatment approach that combines non-surgical endodontic treatment, orthodontic extrusion and prosthetic rehabilitation to restore the function and aesthetic aspect of an extensively carious premolar with compromised prognosis. One year follow-up indicated stable periodontal health with evidence of periapical healing radiographically.
    Matched MeSH terms: Esthetics
  19. Kattimani V, Tiwari RVC, Gufran K, Wasan B, Shilpa PH, Khader AA
    J Int Soc Prev Community Dent, 2019 04 12;9(2):99-105.
    PMID: 31058058 DOI: 10.4103/jispcd.JISPCD_430_18
    Background: Ever-changing perception of beauty from childhood to old age is changing with the revolution in cosmeceuticals science. Esthetics is an individual's perception since time immemorial. Standards of beauty have changed through centuries with increased awareness about esthetics. The face remains main source of information for identification and discrimination. It constitutes a structural ground for many nonverbal messages including the emotional state of a person, so the proverb "Face is an index of mind" holds good. The wrinkles and laxity are considered to be one of the factors for aging. Hence, escalating demand for cosmetic treatment to reduce facial wrinkles and laxity has stimulated us to search for published literature for nonsurgical techniques for enhancement of facial beauty. The review analyzed the published data to provide narrative basic review in a concise way to the beginners, clinicians, and students.

    Materials and Methods: We have adopted search criteria using keywords: Botox, Botulinum toxin, incobotulinumtoxinA, esthetics, face, uses of Botox, with various Boolean operators and or in title, and abstract using PubMed search engine. The database search limited to PubMed only from January 2013 to June 2018.

    Results: Various search results have been appended as annexures at the end of the article for further reference for the readers. Finally, 17 references were selected to write narrative review to meet our objectives.

    Conclusion: The advancing front in the use of toxins is an emerging science for the beautification of a face. Botox exploded in to market because of efficacy, tolerability, and minimally invasive nature. The present review gives brief about the history of Botulinum toxin, types, mechanism of action, clinical indications, preparations, storage, and technique for various uses with a brief note on patient selection, contraindications, and complications.

    Matched MeSH terms: Esthetics
  20. Teoh LY, Chong SS, Hoh SY, Teoh MS, Ng KL
    Asian J Surg, 2019 May;42(5):634-640.
    PMID: 30446424 DOI: 10.1016/j.asjsur.2018.09.014
    OBJECTIVES: Monofilament sutures, both absorbable and non-absorbable, have been used for wound closure. Tissue adhesive has been used in closure of clean, low tension wounds. However, there have been very few published studies on the aesthetic outcomes in neck surgeries. The aim of this study is to compare the patients' and doctors' satisfaction scores in the aesthetic outcome between both methods of closure of thyroidectomy wounds using validated scoring systems.

    METHODS: A double-blinded randomised controlled trial comparing the aesthetic outcome between tissue adhesive and conventional suture was conducted among patients undergoing thyroid and parathyroid surgeries. Ninety-six patients were randomised into two treatment groups. Patients' wounds were scored by an independent observer using the SBSES score at 6 weeks postoperatively and observer component of the POSAS score at 3 months.

    RESULTS: Forty-nine patients were randomised to the tissue adhesive group while forty-seven patients received the conventional method. There was no statistical difference in the aesthetic outcome using the patient's scoring system between both arms, with a median score of 9 (p = 0.25, SD ± 6.5). The observer's satisfaction score using POSAS was also not statistically significant (median score of 14 (p = 0.77, SD ± 6.2)). No significance was found in the observer's median score using the SBSES scoring system either (score 3, p = 0.12, SD ± 1.3). However, there was significant reduction in the duration of closure using glue (4.42 mins vs 6.36 mins, p 

    Matched MeSH terms: Esthetics*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links