MyMedR

Displaying publications 81 - 100 of 532 in total

Abstract:

Sort:

Review of chitosan composite as a heavy metal adsorbent: Material preparation and properties

Begum S, Yuhana NY, Md Saleh N, Kamarudin NHN, Sulong AB

Carbohydr Polym, 2021 May 01;259:117613.
PMID: 33673980 DOI: 10.1016/j.carbpol.2021.117613

A large amount of wastewater is typically discharged into water bodies and has extremely harmful effects to aquatic environments. The removal of heavy metals from water bodies is necessary for the safe consumption of water and human activities. The demand for seafood has considerably increased, and millions of tons of crustacean waste are discarded every year. These waste products are rich in a natural biopolymer known as chitin. The deacetylated form of chitin, chitosan, has attracted attention as an adsorbent. It is a biocompatible and biodegradable polymer that can be modified and converted to various derivatives. This review paper focuses on relevant literature on strategies for chemically modifying the biopolymer and its use in the removal of heavy metals from water and wastewater. The different aspects of chitosan-based derivatives and their preparation and application are elucidated. A list of chitosan-based composites, along with their adsorptivity and experimental conditions, are compiled.

Matched MeSH terms: Waste Water
Anthropogenic emissions of atomic chlorine precursors in the Yangtze River Delta region, China

Yi X, Yin S, Huang L, Li H, Wang Y, Wang Q, et al.

Sci Total Environ, 2021 Jun 01;771:144644.
PMID: 33736175 DOI: 10.1016/j.scitotenv.2020.144644

Chlorine radical plays an important role in the formation of ozone and secondary aerosols in the troposphere. It is hence important to develop comprehensive emissions inventory of chlorine precursors in order to enhance our understanding of the role of chlorine chemistry in ozone and secondary pollution issues. Based on a bottom-up methodology, this study presents a comprehensive emission inventory for major atomic chlorine precursors in the Yangtze River Delta (YRD) region of China for the year 2017. Four primary chlorine precursors are considered in this study: hydrogen chloride (HCl), fine particulate chloride (Cl-) (Cl- in PM2.5), chlorine gas (Cl2), and hypochlorous acid (HClO) with emissions estimated for twelve source categories. The total emissions of these four species in the YRD region are estimated to be 20,424 t, 15,719 t, 1556 and 9331 t, respectively. The emissions of HCl are substantial, with major emissions from biomass burning and coal combustion, together accounting for 68% of the total HCl emissions. Fine particulate Cl- is mainly emitted from industrial processing, biomass burning and waste incineration. The emissions of Cl2 and HClO are mainly associated with usage of chlorine-containing disinfectants, for example, water treatment, wastewater treatment, and swimming pools. Emissions of each chlorine precursor are spatially allocated based on the characteristics of individual source category. This study provides important basic dataset for further studies with respect to the effects of chlorine chemistry on the formation of air pollution complex in the YRD region.

Matched MeSH terms: Waste Water
Fulltext Development of Polyvinylidene Fluoride Membrane via Assembly of Tannic Acid and Polyvinylpyrrolidone for Filtration of Oil/Water Emulsion

Nawi NIM, Ong Amat S, Bilad MR, Nordin NAHM, Shamsuddin N, Prayogi S, et al.

Polymers (Basel), 2021 Mar 22;13(6).
PMID: 33810126 DOI: 10.3390/polym13060976

Wastewater containing oil/water emulsion has a serious ecological impact and threatens human health. The impact worsens as its volume increases. Oil/water emulsion needs to be treated before it is discharged or reused again for processing. A membrane-based process is considered attractive in effectively treating oil/water emulsion, but progress has been dampened by the membrane fouling issue. The objective of this study is to develop polyvinylidene fluoride (PVDF) membranes customized for oil/water emulsion separation by incorporating assembly of tannic acid (TA) and polyvinylpyrrolidone (PVP) in the polymer matrix. The results show that the assembly of TA/PVP complexation was achieved as observed from the change in colour during the phase inversion and as also proven from the characterization analyses. Incorporation of the TA/PVP assembly leads to enhanced surface hydrophilicity by lowering the contact angle from 82° to 47°. In situ assembly of the TA/PVP complex also leads to enhanced clean water permeability by a factor of four as a result of enhanced mean flow pore size from 0.2 to 0.9 µm. Owing to enhanced surface chemistry and structural advantages, the optimum hydrophilic PVDF/TA/PVP membrane poses permeability of 540.18 L/(m2 h bar) for oil/water emulsion filtration, three times higher than the pristine PVDF membrane used as the reference.

Matched MeSH terms: Waste Water
Fulltext Synthesis and characterization of rice husk biochar via hydrothermal carbonization for wastewater treatment and biofuel production

Hossain N, Nizamuddin S, Griffin G, Selvakannan P, Mubarak NM, Mahlia TMI

Sci Rep, 2020 Nov 02;10(1):18851.
PMID: 33139793 DOI: 10.1038/s41598-020-75936-3

The recent implication of circular economy in Australia spurred the demand for waste material utilization for value-added product generations on a commercial scale. Therefore, this experimental study emphasized on agricultural waste biomass, rice husk (RH) as potential feedstock to produce valuable products. Rice husk biochar (RB) was obtained at temperature: 180 °C, pressure: 70 bar, reaction time: 20 min with water via hydrothermal carbonization (HTC), and the obtained biochar yield was 57.9%. Enhancement of zeta potential value from - 30.1 to - 10.6 mV in RB presented the higher suspension stability, and improvement of surface area and porosity in RB demonstrated the wastewater adsorption capacity. Along with that, an increase of crystallinity in RB, 60.5%, also indicates the enhancement of the catalytic performance of the material significantly more favorable to improve the adsorption efficiency of transitional compounds. In contrast, an increase of the atomic O/C ratio in RB, 0.51 delineated high breakdown of the cellulosic component, which is favorable for biofuel purpose. 13.98% SiO2 reduction in RB confirmed ash content minimization and better quality of fuel properties. Therefore, the rice husk biochar through HTC can be considered a suitable material for further application to treat wastewater and generate bioenergy.

Matched MeSH terms: Waste Water
Ancillary palm oil fuel ash (POFA) in sequencing batch reactor for enhancing recalcitrant pollutants removal from domestic wastewater

Lyn CW, Bashir MJ, Wong LY, Lim JW, Sethupathi S, Ng CA

Chemosphere, 2020 Nov 25.
PMID: 33276996 DOI: 10.1016/j.chemosphere.2020.129050

Domestic wastewater has been generated massively along with rapid growth of population and economic. Biological treatment using sequencing batch reactor (SBR) augmented with palm oil fuel ash (POFA) was investigated for the first time. The performance of POFA in enhancing biological treatment of wastewater has not been tested. The porosity property of POFA can improve SBR efficiency by promoting growth of mixed liquor suspended solids (MLSS) and formation of larger flocs for settling and facilitating attachment of microorganisms and pollutants onto POFA surfaces. The properties of POFA were tested to identify morphological properties, particle size, surface area, chemical compositions. Four SBRs, namely SBR1, SBR2, SBR3 and SBR4 were provided with aeration rate of 1, 2, 3 and 4 L/min, respectively. Each reactor was augmented with different dosages of POFA. Optimum aeration rate and POFA concentration were identified by the performance of SBRs in removing chemical oxygen demand (COD), ammoniacal nitrogen (NH3-N) and colour from domestic wastewater. The results showed the most efficient COD (97.8%), NH3-N (99.4%) and colour (98.8%) removals were achieved at optimum POFA concentration of 4 g/L in SBR and aeration rate of 1 L/min. The study also found that higher aeration rate would contribute to the smaller specific size of flocs and decrease the pollutant removal efficiency.

Matched MeSH terms: Waste Water
Fulltext One-step synthesis of zwitterionic graphene oxide nanohybrid: Application to polysulfone tight ultrafiltration hollow fiber membrane

Syed Ibrahim GP, Isloor AM, Ismail AF, Farnood R

Sci Rep, 2020 04 23;10(1):6880.
PMID: 32327672 DOI: 10.1038/s41598-020-63356-2

In this paper, novel zwitterionic graphene oxide (GO) nanohybrid was synthesized using monomers [2-(Methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SBMA) and N,N'-methylenebis(acrylamide) (MBAAm) (GO@poly(SBMA-co-MBAAm), and incorporated into polysulfone (PSF) hollow fiber membrane for the effectual rejection of dye from the wastewater. The synthesized nanohybrid was characterized using FT-IR, PXRD, TGA, EDX, TEM and zeta potential analysis. The occurrence of nanohybrid on the membrane matrix and the elemental composition were analyzed by XPS. The as-prepared tight ultrafiltration hollow fiber membrane exhibited high rejection of reactive black 5 (RB-5, 99%) and reactive orange 16 (RO-16, 74%) at a dye concentration of 10 ppm and pure water flux (PWF) of 49.6 L/m2h. Fabricated nanocomposite membranes were also studied for their efficacy in the removal of both monovalent (NaCl) and divalent salts (Na2SO4). The results revealed that the membrane possesses complete permeation to NaCl with less rejection of Na2SO4 (<5%). In addition, the nanocomposite membrane revealed outstanding antifouling performance with the flux recovery ratio (FRR) of 73% towards bovine serum albumin (BSA). Therefore, the in-house prepared novel nanocomposite membrane is a good candidate for the effective decolorization of wastewater containing dye.

Matched MeSH terms: Waste Water
Landfill leachate wastewater treatment to facilitate resource recovery by a coagulation-flocculation process via hydrogen bond

Cheng SY, Show PL, Juan JC, Chang JS, Lau BF, Lai SH, et al.

Chemosphere, 2021 Jan;262:127829.
PMID: 32768754 DOI: 10.1016/j.chemosphere.2020.127829

Recent trend to recover value-added products from wastewater calls for more effective pre-treatment technology. Conventional landfill leachate treatment is often complex and thus causes negative environmental impacts and financial burden. In order to facilitate downstream processing of leachate wastewater for production of energy or value-added products, it is pertinent to maximize leachate treatment performance by using simple yet effective technology that removes pollutants with minimum chemical added into the wastewater that could potentially affect downstream processing. Hence, the optimization of coagulation-flocculation leachate treatment using multivariate approach is crucial. Central composite design was applied to optimize operating parameters viz. Alum dosage, pH and mixing speed. Quadratic model indicated that the optimum COD removal of 54% is achieved with low alum dosage, pH and mixing speed of 750 mgL-1, 8.5 and 100 rpm, respectively. Optimization result showed that natural pH of the mature landfill leachate sample is optimum for alum coagulation process. Hence, the cost of pH adjustment could be reduced for industrial application by adopting optimized parameters. The inherent mechanism of pollutant removal was elucidated by FTIR peaks at 3853 cm-1 which indicated that hydrogen bonds play a major role in leachate removal by forming well aggregated flocs. This is concordance with SEM image that the floc was well aggregated with the porous linkages and amorphous surface structure. The optimization of leachate treatment has been achieved by minimizing the usage of alum under optimized condition.

Matched MeSH terms: Waste Water
Fulltext Application of Efficient Magnetic Particles and Activated Carbon for Dye Removal from Wastewater

Moosavi S, Lai CW, Gan S, Zamiri G, Akbarzadeh Pivehzhani O, Johan MR

ACS Omega, 2020 Aug 25;5(33):20684-20697.
PMID: 32875202 DOI: 10.1021/acsomega.0c01905

Since the turn of the 21st century, water pollution has been a major issue, and most of the pollution is generated by dyes. Adsorption is one of the most commonly used dye-removal methods from aqueous solution. Magnetic-particle integration in the water-treatment industry is gaining considerable attention because of its outstanding physical and chemical properties. Magnetic-particle adsorption technology shows promising and effective outcomes for wastewater treatment owing to the presence of magnetic material in the adsorbents that can facilitate separation through the application of an external magnetic field. Meanwhile, the introduction of activated carbon (AC) derived from various materials into a magnetic material can lead to efficient organic-dye removal. Therefore, this combination can provide an economical, efficient, and environmentally friendly water-purification process. Although activated carbon from low-cost and abundant materials has considerable potential in the water-treatment industry, the widespread applications of adsorption technology are limited by adsorbent recovery and separation after treatment. This work specifically and comprehensively describes the use of a combination of a magnetic material and an activated carbon material for dye adsorption in wastewater treatment. The literature survey in this mini-review provides evidence of the potential use of these magnetic adsorbents, as well as their magnetic separation and recovery. Future directions and challenges of magnetic activated carbon in wastewater treatment are also discussed in this paper.

Matched MeSH terms: Waste Water
Upgrading a large and centralised municipal wastewater treatment plant with sequencing batch reactor technology for integrated nutrient removal and phosphorus recovery: Environmental and economic life cycle performance

Rashid SS, Liu YQ, Zhang C

Sci Total Environ, 2020 Dec 20;749:141465.
PMID: 32827824 DOI: 10.1016/j.scitotenv.2020.141465

Although nutrient removal and recovery from municipal wastewater are desirable to protect phosphorus resource and water-bodies from eutrophication, it is unclear how much environmental and economic benefits and burdens it might cause. This study evaluated the environmental and economic life cycle performance of three different upgraded Processes A, B and C with commercially available technologies for nutrient removal and phosphorus recovery based on an existing Malaysian wastewater treatment plant with a sequencing batch reactor technology and diluted municipal wastewater. It is found that the integration of nutrient removal, phosphorus recovery and electricity generation in all upgraded processes reduced eutrophication potential by 62-76%, and global warming potential by 7-22%, which, however, were gained at the cost of increases in human toxicity, acidification, abiotic depletion (fossil fuel) and freshwater ecotoxicity potentials by an average of 23%. New technologies for nutrient removal and phosphorus recovery are thus needed to achieve holistic rather than some environmental benefits at the expense of others. In addition, the study on two different functional units (FU), i.e. per m3 treated wastewater and per kg struvite recovered, shows that FU affected environmental assessment results, but the upgraded Process C had the least overall environmental burden with either of FUs, suggesting the necessity to use different functional units when comparing and selecting different technologies with two functions such as wastewater treatment and struvite production to confirm the best process configuration. The total life cycle costs of Processes A, B and C were 10.7%, 29.8% and 28.1%, respectively, higher than the existing process due to increased capital and operating costs. Therefore, a trade-off between environmental benefits and cost has to be balanced for technology selection or new integrated technologies have to be developed to achieve environmentally sustainable wastewater treatment economically.

Matched MeSH terms: Waste Water
Recycling of aquaculture wastewater and sediment for sustainable corn and water spinach production

Van Tung T, Tran QB, Phuong Thao NT, Vi LQ, Hieu TT, Le S, et al.

Chemosphere, 2020 Dec 15;268:129329.
PMID: 33360937 DOI: 10.1016/j.chemosphere.2020.129329

This study develops a method to reuse aquaculture wastewater and sediment from a catfish pond in order to increase agricultural productivity and protect the environment. Material flow analysis (MFA) is a central concept of this study that involves collecting catfish pond wastewater (CPW) and reusing it to irrigate five water spinach (Ipomoea aquatic) ponds before discharging it into a river. Typically, catfish pond sediment (CPS) was collected and composted to produce organic fertilizer for cornfields. The results revealed that pollutant removal efficiency of wastewater from CPW (by using water spinach) were total organic carbon (TOC) = 38.78%, nitrogen (N) = 27.07%, phosphorous (P) = 58.42%, and potassium (K) = 28.64%. By adding 20 tons of CPS compost per hectare of the cornfield, the corn yield boosted 15% compared to the control field. In addition, the water spinach grew and developed well in the medium of wastewater from the fish pond. Altogether, the results illustrate that catfish pond wastewater and sediment can act as organic fertilizers for crops meanwhile reduce environmental pollution from its reuse.

Matched MeSH terms: Waste Water
Fulltext Performance of Salvinia molesta plants in tertiary treatment of domestic wastewater

Mustafa HM, Hayder G

Heliyon, 2021 Jan;7(1):e06040.
PMID: 33537482 DOI: 10.1016/j.heliyon.2021.e06040

The objective of this study was to investigate the performance of different weight of Salvinia molesta plants in biological treatment of domestic wastewater. Three treatment systems containing 280g (GS1), 140g (GS2) and 70g (GS3) of S. molesta plants were used for the phytoremediation process. Physicochemical analysis such as pH, colour, chemical oxygen demand (COD), and biological oxygen demand (BOD5) of the influent and effluent water samples were performed according to spectrophotometric methods. The outcome of the study demonstrated that the different weight of S. molesta plants played a significant role in improving the quality of the wastewater samples, in which GS1 removed 96.8% (colour), 91% (BOD5), and 82.6% (COD). While up to 88.6% (colour), 87.1% (BOD5), and 81.1% (COD) reduction was observed for GS2 treatment systems, and GS3 was efficient in removing 85.5% (colour), 86.1% (BOD5), and 68.3% (COD). Also, a pH value of 6.29-7.19, 5.97-7.07, and 6.17-7.42 was obtained from GS1, GS2 and GS3 treatment systems, respectively. Thus, the treatment system with the highest quantity of S. molesta (GS1) demonstrated better performance compared to the other two systems (GS2 and GS3). The findings of this research can be applied in addressing the goals of sustainable development through the use of green technology to reduce the threat of water pollution in natural water bodies. Perhaps existing and future water scarcity can be resolved through the use of phytoremediation technology.

Matched MeSH terms: Waste Water
Fulltext DETERMINATION OF REACTIVE BLACK 5 (RB5) BY DIFFERENTIAL PULSE ANODIC STRIPPING VOLTAMMETRIC TECHNIQUE

Nur Syamimi Zainudin, Nur Aqilah Abdul Rahman

Journal of Academia Universiti Teknologi MARA Negeri Sembilan, 2021;9(1):73-79.
MyJurnal

Dyes are aromatic organic compound which have an affinity towards the substrate to which they are being applied to. The presence of dyes in wastewater samples is not safe for human even at low level. The presence of dyes in wastewater which are discharged from textile industry must be analysed. Hence, a precise, fast, accurate, simple and inexpensive analytical method with low detection limit is needed for the determination of dyes in wastewaters. The differential pulse anodic stripping voltammetric (DPASV) technique using bare glassy carbon electrode (GCE) as a working electrode and phosphate buffer at pH 4.2 as a supporting electrolyte has been proposed for Reactive Black 5 (RB5) determination. Several experimental voltammetric parameters were being optimized for obtaining a maximum response before analytical validation of the proposed technique being carried out. The optimum parameters were initial potential (Ei) = +0.3 V, end potential (Ef) = +1.0 V, scan rate (v) = 0.04 V/s, accumulation time (tacc) = 50 s, accumulation potential (Eacc) = 0.4 V and pulse amplitude = 0.075 V. The well-defined anodic peak appeared at 0.77972 V. The response was linear from 0.5 to 1.25 mg/L (R2=0.9986) with LOD of 0.050 mg/L. The relative standard deviation (RSD) achieved were 0.08 %, 0.62 % and 0.50 %, respectively for three consecutive days. The % recovery range achieved was from 89.71 % to 111.15 %. It can be concluded that the proposed technique is precise, accurate, inexpensive, fast and has a potential to be an alternative analytical technique for RB5 analysis. The proposed method will in the future be tested for the amount of RB5 in the wastewater samples from textile industry.

Matched MeSH terms: Waste Water
Effects of land use configuration, seasonality and point source on water quality in a tropical watershed: A case study of the Johor River Basin

Pak HY, Chuah CJ, Yong EL, Snyder SA

Sci Total Environ, 2021 Aug 01;780:146661.
PMID: 34030308 DOI: 10.1016/j.scitotenv.2021.146661

Land use plays a significant role in determining the spatial patterns of water quality in the Johor River Basin (JRB), Malaysia. In the recent years, there have been several occurrences of pollution in these rivers, which has generated concerns over the long-term sustainability of the water resources in the JRB. Specifically, this water resource is a shared commodity between two states, namely, Johor state of Malaysia and Singapore, a neighbouring country adjacent to Malaysia. Prior to this study, few research on the influence of land use configuration on water quality have been conducted in Johor. In addition, it is also unclear how water quality varies under different seasonality in the presence of point sources. In this study, we investigated the influence of land use and point sources from wastewater treatment plants (WWTPs) on the water quality in the JRB. Two statistical techniques - Multivariate Linear Regression (MLR) and Redundancy Analysis (RA) were undertaken to analyse the relationships between river water quality and land use configuration, as well as point sources from WWTPs under different seasonality. Water samples were collected from 49 sites within the JRB from March to December in 2019. Results showed that influence from WWTPs on water quality was greater during the dry season and less significant during the wet season. In particular, point source was highly positively correlated with ammoniacal‑nitrogen (NH3-N). On the other hand, land use influence was greater than point source influence during the wet season. Residential and urban land use were important predictors for nutrients and organic matter (chemical oxygen demand); and forest land use were important sinks for heavy metals but a significant source of manganese.

Matched MeSH terms: Waste Water
Fulltext REMOVAL OF CADMIUM IONS FROM SYNTHETIC WASTEWATER BY USINGPennisetum purpureum(ELEPHANT GRASS) AS LOW COSTBIODEGRADABLE ADSORBENT (BIOSORBENT)

LING SHING YUN, ASMADI ALI

UMT Journal of Undergraduate Research, 2019;1(1):103-112.
MyJurnal

At present, heavy metal pollution is a major environmental concern and the adsorption technique is a potent method for removal of these heavy metals from wastewater. Activated carbon is one of the best adsorbents for metal ionsremoval but it is sometimes restricted due to high cost and problems with regeneration hamper large scale application. Low cost adsorbent is alternatively being introduced to replace activated carbon since it is available in large quantity, renewable and inexpensive. Hence, Pennisetum purpureum(elephant grass) was investigated for its potential in cadmium ions removal. The adsorbent was characterized by Fourier Transforms Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM), Brunauer–Emmett–Teller (BET) and Barrett–Joyner–Halenda (BJH) analyses.The effects of pH (1 to 5), initial metal ion concentration (5 to 25 mg/L), contact time (10 to 60 minutes) and adsorbent dosage (0.2 to 1.0 g) on cadmium ions removal were conducted by batch adsorption experiments. In this study, the FT-IR results demonstrated that the functional groups for untreated and nitric acid-treated P. purpureum mainly consisted of carbonyl, carboxyl, hydroxyl and amine groups which are able to bind with positively charged cadmium ions. SEM micrographs have proven that nitric acid modification would remove the surface impurities of P. purpureum, which increased the surface roughness, produced deep, open pores and better pore size distribution. From the BET and BJH analyses, the treated P. purpureum was mesoporous, had larger surface area and pore volume compared to untreated P. purpureum. The best pH, adsorbent dosage and contact time were pH 4, 0.6 g and 30 minutes, respectively. The highest removal percentage of cadmium ions for both untreated and treated P. purpureum were 92% and 98% correspondingly. The results shown strengthened the fact that both biosorbents have great potential in cadmium ions removal.

Matched MeSH terms: Waste Water
Fulltext Multidrug-resistant bacteria and microbial communities in a river estuary with fragmented suburban waste management

Ho JY, Jong MC, Acharya K, Liew SSX, Smith DR, Noor ZZ, et al.

J Hazard Mater, 2021 03 05;405:124687.
PMID: 33301976 DOI: 10.1016/j.jhazmat.2020.124687

River systems in developing and emerging countries are often fragmented relative to land and waste management in their catchment. The impact of inconsistent waste management and releases is a major challenge in water quality management. To examine how anthropogenic activities and estuarine effects impact water quality, we characterised water conditions, in-situ microbiomes, profiles of faecal pollution indicator, pathogenic and antibiotic resistant bacteria in the River Melayu, Southern Malaysia. Overall, upstream sampling locations were distinguished from those closer to the coastline by physicochemical parameters and bacterial communities. The abundances of bacterial DNA, total E. coli marker genes, culturable bacteria as well as antibiotic resistance ESBL-producing bacteria were elevated at upstream sampling locations especially near discharge of a wastewater oxidation pond. Furthermore, 85.7% of E. faecalis was multidrug-resistant (MDR), whereas 100% of E. cloacae, E. coli, K. pneumoniae were MDR. Overall, this work demonstrates how pollution in river estuaries does not monotonically change from inland towards the coast but varies according to local waste releases and tidal mixing. We also show that surrogate markers, such dissolved oxygen, Bacteroides and Prevotella abundances, and the rodA qPCR assay for total E. coli, can identify locations on a river that deserve immediate attention to mitigate AMR spread through improved waste management.

Matched MeSH terms: Waste Water
A review on effective removal of emerging contaminants from aquatic systems: Current trends and scope for further research

Rathi BS, Kumar PS, Show PL

J Hazard Mater, 2021 05 05;409:124413.
PMID: 33183841 DOI: 10.1016/j.jhazmat.2020.124413

Wastewater is water that has already been contaminated by domestic, industrial and commercial activity that needs to be treated before it could be discharged into some other water bodies to avoid even more groundwater contamination supplies. It consists of various contaminants like heavy metals, organic pollutants, inorganic pollutants and Emerging contaminants. Research has been doing on all types of contaminates more than a decade, but this emerging contaminants is the contaminants which arises mostly from pharmaceuticals, personal care products, hormones and fertilizer industries. The majority of emerging contaminants did not have standardized guidelines, but may have adverse effects on human and marine organisms, even at smaller concentrations. Typically, extremely low doses of emerging contaminants are found in the marine environment and cause a potential risk to the aquatic animals living there. When contaminants emerge in the marine world, they are potentially toxic and pose many risks to the health of both man and livestock. The aim of this article is to review the Emerging contaminate sources, detection methods and treatment methods. The purpose of this study is to consider the adsorption as a beneficial treatment of emerging contaminants also advanced and cost effective emerging contaminates treatment methods.

Matched MeSH terms: Waste Water
Bioremediation and Detoxification of the Textile Wastewater with Membrane Bioreactor Using the White-rot Fungus and Reuse of Wastewater

Hossain K, Quaik S, Ismail N, Rafatullah M, Avasan M, Shaik R

Iran J Biotechnol, 2016 Sep;14(3):154-162.
PMID: 28959331 DOI: 10.15171/ijb.1216

BACKGROUND: Application of membrane technology to wastewater treatment has expanded over the last decades due to increasingly stringent legislation, greater opportunities for water reuse/recycling processes and continuing advancement in membrane technology.
OBJECTIVES: In the present study, a bench-scale submerged microfiltration membrane bioreactor (MBR) was used to assess the treatment of textile wastewater.
MATERIALS AND METHODS: The decolorization capacity of white-rot fungus coriolus versicolor was confirmed through agar plate and liquid batch studies. The temperature and pH of the reactor were controlled at 29±1°C and 4.5±2, respectively. The bioreactor was operated with an average flux of 0.05 m.d(-1) (HRT=15hrs) for a month.
RESULTS: Extensive growth of fungi and their attachment to the membrane led to its fouling and associated increase of the transmembrane pressure requiring a periodic withdrawal of sludge and membrane cleaning. However, stable decoloration activity (approx. 98%), BOD (40-50%), COD (50-67%) and total organic carbon (TOC) removal (>95%) was achieved using the entire system (fungi + membrane), while the contribution of the fungi culture alone for TOC removal, as indicated by the quality of the reactor supernatant, was 35-50% and 70%, respectively.
CONCLUSIONS: The treated wastewater quality satisfied the requirement of water quality for dyeing and finishing process excluding light coloration. Therefore, textile wastewater reclamation and reuse is a promising alternative, which can both conserve or supplement the available water resource and reduce or eliminate the environmental pollution.

Matched MeSH terms: Waste Water
Reclamation of Hexavalent Chromium from Electroplating Effluents by Electroextraction

Revathi M, Sivagaami Sundari G, Ahmed Basha C, Alam M, Sagadevan S, Ahmad N

J Nanosci Nanotechnol, 2020 10 01;20(10):6547-6554.
PMID: 32385012 DOI: 10.1166/jnn.2020.18562

This investigation aims at the reclamation of Cr(VI) from synthetic electroplating industrial effluent by electroextraction process namely electrochemical ion exchange (EIX). An electrochemical ion exchange reactor of desired dimensions was fabricated with the help of ion-permeable membranes, stainless steel cathode and PbO₂ coated Ti expanded mesh anode. The performance of the reactor was studied in batch recirculation mode, continuous flow mode at different experimental conditions. The influence of various experimental factors, for instance, initial metal ion concentration (20, 300, 1000 mg/L of Cr(VI)), applied voltages (2.5 V, 5 V, 7.5 V, 10 V) and flow rates of the process stream (2, 4, 6, 8, 10, 12 and 14 ml/min) on removal/reclamation efficiency was deliberated. For comparison purposes, an electrodialysis process was conducted at the same optimal conditions. It was found that the EIX process with three compartments has more removal efficiency at optimum experimental conditions than the electrodialysis process. The continuous flow process of the reactor with 300 mg/L of Cr(VI) as inlet concentration has studied to predict the breakeven point of the reactor. It was noted that Cr(VI) ion concentration in the treated wastewater is almost zero up to the discharge of 20 liters of treated rinse water.

Matched MeSH terms: Waste Water
Fulltext Microbiota of Palm Oil Mill Wastewater in Malaysia

Bala JD, Lalung J, Al-Gheethi AAS, Hossain K, Ismail N

Trop Life Sci Res, 2018 Jul;29(2):131-163.
PMID: 30112146 MyJurnal DOI: 10.21315/tlsr2018.29.2.10

This study was aimed at identifying indigenous microorganisms from palm oil mill effluent (POME) and to ascertain the microbial load. Isolation and identification of indigenous microorganisms was subjected to standard microbiological methods and sequencing of the 16S rRNA and 18S rRNA genes. Sequencing of the 16S rRNA and 18S rRNA genes for the microbial strains signifies that they were known as Micrococcus luteus 101PB, Stenotrophomonas maltophilia 102PB, Bacillus cereus 103PB, Providencia vermicola 104PB, Klebsiella pneumoniae 105PB, Bacillus subtilis 106PB, Aspergillus fumigatus 107PF, Aspergillus nomius 108PF, Aspergillus niger 109PF and Meyerozyma guilliermondii 110PF. Results revealed that the population of total heterotrophic bacteria (THB) ranged from 9.5 × 105 - 7.9 × 106 cfu/mL. The total heterotrophic fungi (THF) ranged from 2.1 × 104 - 6.4 × 104 cfu/mL. Total viable heterotrophic indigenous microbial population on CMC agar ranged from 8.2 × 105 - 9.1 × 106 cfu/mL and 1.4 × 103 - 3.4 × 103 cfu/mL for bacteria and fungi respectively. The microbial population of oil degrading bacteria (ODB) ranged from 6.4 × 105 - 4.8 × 106 cfu/mL and the oil degrading fungi (ODF) ranged from 2.8 × 103 - 4.7 × 104 cfu/mL. The findings revealed that microorganisms flourish well in POME. Therefore, this denotes that isolating native microorganisms from POME is imperative for effectual bioremediation, biotreatment and biodegradation of industrial wastewaters.

Matched MeSH terms: Waste Water
Antimicrobial resistance patterns and genotypic diversity between clinical and water systems isolates of Pseudomonas aeruginosa in Cali, Colombia

Chávez M, Cabezas AF, Ferauds M, Castillo JE, Caicedo LD

Trop Biomed, 2020 Sep 01;37(3):650-662.
PMID: 33612779 DOI: 10.47665/tb.37.3.650

Pseudomonas aeruginosa is considered an opportunistic pathogen, causing a wide variety of infections in compromised hosts, also frequently develops multi-resistance to antibiotics and can colonize various habitats, including water systems. The main aim of this study was to investigate antibiotics susceptibility pattern, genotypic diversity and detection of resistence genes in P. aeruginosa isolates from clinical and aquatic environment sources. Of the 220 P. aeruginosa isolates examined, 48 were clinical isolates and 172 isolates from wastewater and freshwater. Susceptibility to eight antimicrobial agents was carried out by disk diffusion method. Clinical and environmental isolates were screened for the presence of the genes encoding blaKPC-2, blaCTX-M-9, blaPER-1, blaOXA-10, blaIMP-1, blaVIM-2 and blaampC by polymerase chain reaction (PCR). Isolates were examined with PCR-SSCP analysis of partial DNAr 16S sequence. Isolates were mainly resistant to cefoxitin. Multidrug-resistant P. aeruginosa (MDRPA) strains were found in 70% and 90.3% of the clinical and environmental isolates, respectively. The prevalence rates of â-lactamase genes were recorded (blaKPC-2 41.3%, blaVIM-2 36.8%, blaIMP-1 13.6%, blaCTX-M-9 10.9% and blaampC 10.5%,). The PCR-SSCP analysis showed three conformational patterns. All clinical isolates and most environmental isolates were grouped into a single cluster. In this study, we found that P. aeruginosa strains recovered from city water systems must be considered potential reservoir for ESBL genes, especially blaKPC-2 and blaVIM-2.

Matched MeSH terms: Waste Water

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links