Displaying publications 1021 - 1040 of 9863 in total

Abstract:
Sort:
  1. Impacts of 2 species of predatory Reduviidae on bagworms in oil palm plantations
    Jamian S, Norhisham A, Ghazali A, Zakaria A, Azhar B
    Insect Sci, 2017 Apr;24(2):285-294.
    PMID: 26712127 DOI: 10.1111/1744-7917.12309
    Integrated pest management (IPM) is widely practiced in commercial oil palm agriculture. This management system is intended to minimize the number of attacks by pest insects such as bagworms on crops, as well as curb economic loss with less dependency on chemical pesticides. One practice in IPM is the use of biological control agents such as predatory insects. In this study, we assessed the response of predatory natural enemies to pest outbreak and water stress, and document the habitat associations of potential pest predators. The abundances of 2 predatory insect species, namely Sycanus dichotomus and Cosmolestes picticeps (Hemiptera: Reduviidae), were compared bagworm outbreak sites and nonoutbreak sites within oil palm plantations. We also examined habitat characteristics that influence the abundances of both predatory species. We found that the abundance of C. picticeps was significantly higher in bagworm outbreak sites than in nonoutbreak sites. There were no significant differences in the abundance of S. dichotomus among outbreak and non-outbreak sites. Both species responded negatively to water stress in oil palm plantations. Concerning the relationship between predatory insect abundance and in situ habitat quality characteristics, our models explained 46.36% of variation for C. picticeps and 23.17% of variation for S. dichotomus. Both species of predatory insects thrived from the planting of multiple beneficial plants in oil palm plantations. The results suggest that C. picticeps can be used as a biological agent to control bagworm populations in oil palm plantations, but S. dichotomus has no or little potential for such ecosystem service.
    Matched MeSH terms: Pest Control, Biological/methods*
  2. Fulltext Life table of Synthesiomyia nudiseta (Van der Wulp) (Diptera: Muscidae) under uncontrolled laboratory environments - a preliminary study
    Aruna Devi A, Abu Hassan A, Kumara TK, Che Salmah MR
    Trop Biomed, 2011 Dec;28(3):524-30.
    PMID: 22433881
    The life history of the male and female of the indoor forensic fly, Synthesiomyia nudiseta was studied under fluctuating temperature of indoor environments and analysed based on the age-stage and two sex life table. The life cycle of S. nudiseta was 14.0±1.0 days from the egg stage to adult emergence. The population parameters calculated were; net reproduction rate (R(o)= 108.6), mean generation time (T(o)= 12.2), intrinsic rate of increase (r(m)= 0.38), and finite rate of increase (λ= 1.46). The pre-oviposition period (APOP) was 6.0± 0.1 days. All population parameters suggested that S. nudiseta exhibits the r-strategist characteristics.
    Matched MeSH terms: Entomology/methods
  3. Fulltext A novel alternative method for 3D visualisation in Parasitology: the construction of a 3D model of a parasite from 2D illustrations
    Teo BG, Sarinder KK, Lim LH
    Trop Biomed, 2010 Aug;27(2):254-64.
    PMID: 20962723 MyJurnal
    Three-dimensional (3D) models of the marginal hooks, dorsal and ventral anchors, bars and haptoral reservoirs of a parasite, Sundatrema langkawiense Lim & Gibson, 2009 (Monogenea) were developed using the polygonal modelling method in Autodesk 3ds Max (Version 9) based on two-dimensional (2D) illustrations. Maxscripts were written to rotate the modelled 3D structures. Appropriately orientated 3D haptoral hard-parts were then selected and positioned within the transparent 3D outline of the haptor and grouped together to form a complete 3D haptoral entity. This technique is an inexpensive tool for constructing 3D models from 2D illustrations for 3D visualisation of the spatial relationships between the different structural parts within organisms.
    Matched MeSH terms: Parasitology/methods*
  4. Fulltext Field evaluations of the granular fly bait, Quick Bayt and the paint-on fly bait, Agita against synanthropic flies
    Nurita AT, Abu Hassan A, Nur Aida H, Norasmah B
    Trop Biomed, 2008 Aug;25(2):126-33.
    PMID: 18948883
    The efficacy and residual efficacy of commercial baits, Quick Bayt (0.5% w/w imidacloprid) and Agita (10.0% w/w thiamethoxam) against synanthropic flies were evaluated under field conditions. Efficacy was evaluated based on knockdown percentage (KD %). The bait efficacy and residual efficacy evaluation were conducted for a period of 3 weeks and 6 weeks respectively. Baits were applied onto bait targets and placed on fly-count targets to facilitate the counting of flies. All baits were applied according to the manufacturer's recommended application rate. Three replicate treatments for each type of bait were placed at the study site each week. The number of flies feeding on baits and the knocked down flies were counted and collected. The efficacy of Agita and Quick Bayt did not differ significantly (t-test, P>0.05) over the 3-week period, even though Quick Bayt had a slightly higher KD% than Agita. In the residual efficacy evaluation, the (knockdown) KD% of Quick Bayt was consistent at around 36% for the first five weeks but dropped to 33.8 +/- 0.4% on the sixth week. The KD% for Agita on the first week was 33.6 +/- 12.2% and remained relatively consistent for the first 4 weeks at around 31%. KD% dropped to 16.7 +/- 3.3% on week 5 and to 15.7 +/- 1.2% on week 6. The difference in residual efficacy of the two baits was significant (t-test, p < 0.05).
    Matched MeSH terms: Insect Control/methods*
  5. Fulltext Determination of the flight range and dispersal of the house fly, Musca domestica (L.) using mark release recapture technique
    Nazni WA, Luke H, Wan Rozita WM, Abdullah AG, Sa'diyah I, Azahari AH, et al.
    Trop Biomed, 2005 Jun;22(1):53-61.
    PMID: 16880754
    In order to control any pest it is essential to study the life cycle, biology and bionomics of the target pest under control. With this respect, we have studied the flight range of the house fly Musca domestica (L.). The flight range of the house fly from two sites i.e, the poultry farm and a stable farm has been studied. The flight range study was conducted using a mark release technique. The approach we used in this study was that the flies collected from the respective farms were marked and released at different distances from the farms. The flies were then re-captured from the poultry farm and the stable farm. Studies conducted elsewhere use the technique of releasing the insect species at one spot and recapturing the insect species with the help of baited traps placed at various locations from the release point. The advantage of the approach used in this study was that the flight range as well as the homing effect was determined. From this study, the flight range of house flies released at the poultry farm was 7 km whereas flight range for flies release from stable farm was 5 km. The recovery rate of house flies at the poultry and stable farm was 0.05% and 0.016%, In this study, marked specimens has been detected up to 8 days in field conditions indicating that under field condition the life expectancy could be in the range of 1-2 weeks.
    Matched MeSH terms: Insect Control/methods*
  6. Current regulatory requirements and practical approaches for stability analysis of pharmaceutical products: A comprehensive review
    Sengupta P, Chatterjee B, Tekade RK
    Int J Pharm, 2018 May 30;543(1-2):328-344.
    PMID: 29635054 DOI: 10.1016/j.ijpharm.2018.04.007
    Different regulatory guidelines recommend establishing stability profile of pharmaceuticals at the time of drug development. The expiry date, retesting period and storage conditions of active drugs or products are established through stability analysis. Several regulatory guidelines exist for stability testing of pharmaceuticals. Mostly, ICH stability guidelines are followed in practice. This guideline recommends to validate stability indicating method using forced degradation samples that contains all possible degradation impurities. ICH guidelines provide general recommendations for inclusion of stability indicating parameters in a stability testing protocol. However, those guidelines do not provide specific requirements and experimental methodology to be followed for stability studies. Due to this gap, often confusion arises in the scientific community in designing stability testing protocol. Therefore, significant variations are observed in reported literature in selection of stability indicating parameters. Procedural dissimilarity amongst reported stability studies is also evident. This review discusses the regulatory guidelines and procedures to follow in performing stability testing of pharmaceuticals. Scope of this review also includes recommendations on practical approaches for designing stability testing protocol to fulfill current regulatory requirements for drug substances and their formulations.
    Matched MeSH terms: Chemistry, Pharmaceutical/methods
  7. Dynamic ECG features for atrial fibrillation recognition
    Abdul-Kadir NA, Mat Safri N, Othman MA
    Comput Methods Programs Biomed, 2016 Nov;136:143-50.
    PMID: 27686711 DOI: 10.1016/j.cmpb.2016.08.021
    BACKGROUND: Atrial fibrillation (AF) can cause the formation of blood clots in the heart. The clots may move to the brain and cause a stroke. Therefore, this study analyzed the ECG features of AF and normal sinus rhythm signals for AF recognition which were extracted by using a second-order dynamic system (SODS) concept.
    OBJECTIVE: To find the appropriate windowing length for feature extraction based on SODS and to determine a machine learning method that could provide higher accuracy in recognizing AF.
    METHOD: ECG features were extracted based on a dynamic system (DS) that uses a second-order differential equation to describe the short-term behavior of ECG signals according to the natural frequency (ω), damping coefficient, (ξ), and forcing input (u). The extracted features were windowed into 2, 3, 4, 6, 8, and 10 second episodes to find the appropriate windowing size for AF signal processing. ANOVA and t-tests were used to determine the significant features. In addition, pattern recognition machine learning methods (an artificial neural network (ANN) and a support vector machine (SVM)) with k-fold cross validation (k-CV) were used to develop the ECG recognition system.
    RESULTS: Significant differences (p 
    Matched MeSH terms: Electrocardiography/methods*
  8. Tableting Properties and Compression Models of Labisia pumila Tablets
    Etti CJ, Yusof YA, Chin NL, Mohd Tahir S
    J Diet Suppl, 2017 Mar 04;14(2):132-145.
    PMID: 27487244
    The tableting properties of Labisia pumila herbal powder, which is well known for its therapeutic benefits was investigated. The herbal powder was compressed into tablets using a stainless steel cylindrical uniaxial die of 13-mm- diameter with compaction pressures ranging from 7 to 25 MPa. Two feed weights, 0.5 and 1.0 g were used to form tablets. Some empirical models were used to describe the compressibility behavior of Labisia pumila tablets. The strength and density of tablets increased with increase in compaction pressure and resulted in reduction in porosity of the tablets. Smaller feeds, higher forces and increase in compaction pressure, contributed to more coherent tablets. These findings can be used to enhance the approach and understanding of tableting properties of Labisia pumila herbal powder tablets.
    Matched MeSH terms: Drug Compounding/methods*
  9. Automated otolith image classification with multiple views: an evaluation on Sciaenidae
    Wong JY, Chu C, Chong VC, Dhillon SK, Loh KH
    J Fish Biol, 2016 Aug;89(2):1324-44.
    PMID: 27364089 DOI: 10.1111/jfb.13039
    Combined multiple 2D views (proximal, anterior and ventral aspects) of the sagittal otolith are proposed here as a method to capture shape information for fish classification. Classification performance of single view compared with combined 2D views show improved classification accuracy of the latter, for nine species of Sciaenidae. The effects of shape description methods (shape indices, Procrustes analysis and elliptical Fourier analysis) on classification performance were evaluated. Procrustes analysis and elliptical Fourier analysis perform better than shape indices when single view is considered, but all perform equally well with combined views. A generic content-based image retrieval (CBIR) system that ranks dissimilarity (Procrustes distance) of otolith images was built to search query images without the need for detailed information of side (left or right), aspect (proximal or distal) and direction (positive or negative) of the otolith. Methods for the development of this automated classification system are discussed.
    Matched MeSH terms: Biometry/methods*
  10. Determination of pesticide residues in leafy vegetables at parts per billion levels by a chemometric study using GC-ECD in Cameron Highlands, Malaysia
    Farina Y, Abdullah MP, Bibi N, Khalik WM
    Food Chem, 2017 Jun 01;224:55-61.
    PMID: 28159293 DOI: 10.1016/j.foodchem.2016.11.113
    A simple and sensitive analytical method has been developed employing gas chromatography coupled with electron capture detector (GC-ECD), and validated for screening and quantification of 15 pesticide residues at trace levels in cabbage, broccoli, cauliflower, lettuce, celery, spinach, and mustard. The method consists of two steps, first, to determine the significance of each factor by Pareto chart followed by optimization of these significant factors using central composite design (CCD). Minitab statistical software was used for these multivariate experiments for the generation of 2(4-1) design and CCD matrices. The method evaluation was done by external standard calibration with linearity range between 0.5 and 3mg/kg, with correlation coefficient 0.99, limit of detection (LOD) ranges between 0.02 and 4.5ng/g, and limit of quantification (LOQ) ranges between 0.2 and 45ng/g. The average recovery was between 60% and 128%, with RSD 0.2-19.8%. The method was applied on real vegetable samples from Cameron Highlands.
    Matched MeSH terms: Chromatography, Gas/methods*
  11. Backtracking search algorithm in CVRP models for efficient solid waste collection and route optimization
    Akhtar M, Hannan MA, Begum RA, Basri H, Scavino E
    Waste Manag, 2017 Mar;61:117-128.
    PMID: 28153405 DOI: 10.1016/j.wasman.2017.01.022
    Waste collection is an important part of waste management that involves different issues, including environmental, economic, and social, among others. Waste collection optimization can reduce the waste collection budget and environmental emissions by reducing the collection route distance. This paper presents a modified Backtracking Search Algorithm (BSA) in capacitated vehicle routing problem (CVRP) models with the smart bin concept to find the best optimized waste collection route solutions. The objective function minimizes the sum of the waste collection route distances. The study introduces the concept of the threshold waste level (TWL) of waste bins to reduce the number of bins to be emptied by finding an optimal range, thus minimizing the distance. A scheduling model is also introduced to compare the feasibility of the proposed model with that of the conventional collection system in terms of travel distance, collected waste, fuel consumption, fuel cost, efficiency and CO2 emission. The optimal TWL was found to be between 70% and 75% of the fill level of waste collection nodes and had the maximum tightness value for different problem cases. The obtained results for four days show a 36.80% distance reduction for 91.40% of the total waste collection, which eventually increases the average waste collection efficiency by 36.78% and reduces the fuel consumption, fuel cost and CO2 emission by 50%, 47.77% and 44.68%, respectively. Thus, the proposed optimization model can be considered a viable tool for optimizing waste collection routes to reduce economic costs and environmental impacts.
    Matched MeSH terms: Refuse Disposal/methods*
  12. Fulltext A metamodel for mobile forensics investigation domain
    Ali A, Abd Razak S, Othman SH, Mohammed A, Saeed F
    PLoS One, 2017;12(4):e0176223.
    PMID: 28445486 DOI: 10.1371/journal.pone.0176223
    With the rapid development of technology, mobile phones have become an essential tool in terms of crime fighting and criminal investigation. However, many mobile forensics investigators face difficulties with the investigation process in their domain. These difficulties are due to the heavy reliance of the forensics field on knowledge which, although a valuable resource, is scattered and widely dispersed. The wide dispersion of mobile forensics knowledge not only makes investigation difficult for new investigators, resulting in substantial waste of time, but also leads to ambiguity in the concepts and terminologies of the mobile forensics domain. This paper developed an approach for mobile forensics domain based on metamodeling. The developed approach contributes to identify common concepts of mobile forensics through a development of the Mobile Forensics Metamodel (MFM). In addion, it contributes to simplifying the investigation process and enables investigation teams to capture and reuse specialized forensic knowledge, thereby supporting the training and knowledge management activities. Furthermore, it reduces the difficulty and ambiguity in the mobile forensics domain. A validation process was performed to ensure the completeness and correctness of the MFM. The validation was conducted using two techniques for improvements and adjustments to the metamodel. The last version of the adjusted metamodel was named MFM 1.2.
    Matched MeSH terms: Forensic Sciences/methods*
  13. Positron emission mammography is a useful adjunct in assessment of dense breasts
    Kumar SK, Trujillo PB, Ucros GR
    Med J Malaysia, 2017 04;72(2):138-140.
    PMID: 28473683
    Worldwide breast cancer remains as the most common malignancy in women and the numbers who form a subgroup with dense breast parenchyma are substantial. In addition to mammography, the adjuncts used for further evaluation of dense breasts have been anatomically based modalities such as ultrasound and magnetic resonance imaging. The practice of functionally based imaging of breasts is relatively new but has undergone rapid progress over the past few years with promising results. The value of positron emission mammography is demonstrated in patients with dense breasts and mammographically occult disease.
    Matched MeSH terms: Mammography/methods*
  14. Grain-dependent responses of mammalian diversity to land use and the implications for conservation set-aside
    Wearn OR, Carbone C, Rowcliffe JM, Bernard H, Ewers RM
    Ecol Appl, 2016 Jul;26(5):1409-1420.
    PMID: 27755763 DOI: 10.1890/15-1363
    Diversity responses to land-use change are poorly understood at local scales, hindering our ability to make forecasts and management recommendations at scales which are of practical relevance. A key barrier in this has been the underappreciation of grain-dependent diversity responses and the role that β-diversity (variation in community composition across space) plays in this. Decisions about the most effective spatial arrangement of conservation set-aside, for example high conservation value areas, have also neglected β-diversity, despite its role in determining the complementarity of sites. We examined local-scale mammalian species richness and β-diversity across old-growth forest, logged forest, and oil palm plantations in Borneo, using intensive camera- and live-trapping. For the first time, we were able to investigate diversity responses, as well as β-diversity, at multiple spatial grains, and across the whole terrestrial mammal community (large and small mammals); β-diversity was quantified by comparing observed β-diversity with that obtained under a null model, in order to control for sampling effects, and we refer to this as the β-diversity signal. Community responses to land use were grain dependent, with large mammals showing reduced richness in logged forest compared to old-growth forest at the grain of individual sampling points, but no change at the overall land-use level. Responses varied with species group, however, with small mammals increasing in richness at all grains in logged forest compared to old-growth forest. Both species groups were significantly depauperate in oil palm. Large mammal communities in old-growth forest became more heterogeneous at coarser spatial grains and small mammal communities became more homogeneous, while this pattern was reversed in logged forest. Both groups, however, showed a significant β-diversity signal at the finest grain in logged forest, likely due to logging-induced environmental heterogeneity. The β-diversity signal in oil palm was weak, but heterogeneity at the coarsest spatial grain was still evident, likely due to variation in landscape forest cover. Our findings suggest that the most effective spatial arrangement of set-aside will involve trade-offs between conserving large and small mammals. Greater consideration in the conservation and management of tropical landscapes needs to be given to β-diversity at a range of spatial grains.
    Matched MeSH terms: Conservation of Natural Resources/methods*
  15. Modeling and Simulation of Two Wheelchair Accessories for Pushing Doors
    Abdullah SJ, Shaikh Mohammed J
    Assist Technol, 2018;30(4):165-175.
    PMID: 28346064 DOI: 10.1080/10400435.2017.1293193
    Independent mobility is vital to individuals of all ages, and wheelchairs have proven to be great personal mobility devices. The tasks of opening and navigating through a door are trivial for healthy people, while the same tasks could be difficult for some wheelchair users. A wide range of intelligent wheelchair controllers and systems, robotic arms, or manipulator attachments integrated with wheelchairs have been developed for various applications, including manipulating door knobs. Unfortunately, the intelligent wheelchairs and robotic attachments are not widely available as commercial products. Therefore, the current manuscript presents the modeling and simulation of a novel but simple technology in the form of a passive wheelchair accessory (straight, arm-like with a single wheel, and arc-shaped with multiple wheels) for pushing doors open from a wheelchair. From the simulations using different wheel shapes and sizes, it was found that the arc-shaped accessory could push open the doors faster and with almost half the required force as compared to the arm-like accessory. Also, smaller spherical wheels were found to be best in terms of reaction forces on the wheels. Prototypes based on the arc-shaped accessory design will be manufactured and evaluated for pushing doors open and dodging or gliding other obstacles.
    Matched MeSH terms: Equipment Design/methods*
  16. Results of a modified transvesical prostatectomy--a review of 100 cases
    Sreenevasan GA, Chelvanayagam DD
    Med J Malaysia, 1975 Dec;30(2):110-3.
    PMID: 1228375
    Matched MeSH terms: Prostatectomy/methods*
  17. Media selection for education in the allied health sciences
    Teong TS
    Med J Malaysia, 1975 Jun;29(4):240-5.
    PMID: 53778
    Matched MeSH terms: Teaching/methods
  18. Mobile Health Applications for Pediatric Care: Review and Comparison
    Morse SS, Murugiah MK, Soh YC, Wong TW, Ming LC
    Ther Innov Regul Sci, 2018 05;52(3):383-391.
    PMID: 29714538 DOI: 10.1177/2168479017725557
    BACKGROUND: Despite the surge in mobile health (mHealth) applications (apps) about pediatric care in commercial app stores, to our knowledge, reviews of the quality of such apps are lacking. Consequently, it is a great challenge for health care professionals (HCPs) to identify appropriate and reliable mHealth apps for delivering health care services. Thus, we performed a structured review of the extant literature about mHealth apps in pediatric care and quality assessment of selected apps found in commercial app stores.

    METHODS: A review and comparison of mHealth apps in pediatric care found in Google's Play Store (Android system) and Apple's App Store (iOS system) were performed. For the structured review of the available literature, Google Scholar, PubMed, IEEE Xplore Digital Library, and Science Direct online databases were used for the literature search. The assessment criteria used for comparison included requirement for Internet connection, size of application, information on disease, diagnostic tools, medical calculator, information on disease treatments, dosage recommendations, and drug interaction checker.

    RESULTS: Fifty mHealth apps for general pediatric care and 8 mHealth apps for specific pediatric diseases were discussed in the literature. Of the 90 mHealth apps we reviewed, 27 that fulfilled the study criteria were selected for quality assessment. Medscape, Skyscape, and iGuideline scored the highest (score=7), while PediaBP scored the lowest (score=3).

    CONCLUSIONS: Medscape, Skyscape, and iGuideline are the most comprehensive mHealth apps for HCPs as quick references for pediatric care. More studies about mHealth apps in pediatric care are warranted to ensure the quality and reliability of mHealth apps.

    Matched MeSH terms: Telemedicine/methods*
  19. Thirty years of submental intubation: a review
    Lim D, Ma BC, Parumo R, Shanmuhasuntharam P
    Int J Oral Maxillofac Surg, 2018 Sep;47(9):1161-1165.
    PMID: 29731193 DOI: 10.1016/j.ijom.2018.04.015
    Submental intubation has been used as an alternative to conventional intubation in the field of oral and maxillofacial surgery since its introduction by Francisco Hernández Altemir in 1986. A review of submental intubation was performed using data from all case reports, case-series, and prospective and retrospective studies published between 1986 and 2016. The indications, variations in incision length, incision sites, types of endotracheal tube used, methods of exteriorization, and complications were recorded and analyzed. A total of 70 articles reporting 1021 patients were included. The main indication was maxillofacial trauma (86.9%, n=887), followed by orthognathic surgery (5.8%, n=59), skull base surgery (2.8%, n=29), and rhinoplasty and rhytidectomy (1.5%, n=15). The complication rate was relatively low: 91.0% of patients (n=929) were complication-free. The most common complication was infection, occurring in 3.5% (n=36) of the total number of patients, followed by scarring (1.2%, n=12) and formation of an orocutaneous or salivary fistula (1.1%, n=11). In summary, submental intubation is a good alternative airway with minimal complications.
    Matched MeSH terms: Intubation, Intratracheal/methods*
  20. Fulltext Identification and characterization of Burkholderia multivorans CCA53
    Akita H, Kimura ZI, Yusoff MZM, Nakashima N, Hoshino T
    BMC Res Notes, 2017 Jul 06;10(1):249.
    PMID: 28683814 DOI: 10.1186/s13104-017-2565-1
    OBJECTIVE: A lignin-degrading bacterium, Burkholderia sp. CCA53, was previously isolated from leaf soil. The purpose of this study was to determine phenotypic and biochemical features of Burkholderia sp. CCA53.

    RESULTS: Multilocus sequence typing (MLST) analysis based on fragments of the atpD, gltD, gyrB, lepA, recA and trpB gene sequences was performed to identify Burkholderia sp. CCA53. The MLST analysis revealed that Burkholderia sp. CCA53 was tightly clustered with B. multivorans ATCC BAA-247T. The quinone and cellular fatty acid profiles, carbon source utilization, growth temperature and pH were consistent with the characteristics of B. multivorans species. Burkholderia sp. CCA53 was therefore identified as B. multivorans CCA53.

    Matched MeSH terms: Multilocus Sequence Typing/methods*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links