MyMedR

Displaying publications 101 - 120 of 125 in total

Abstract:

Sort:

Fulltext Surface-Engineered Super-Paramagnetic Iron Oxide Nanoparticles For Chromium Removal

Samrot AV, Sahithya CS, Selvarani A J, Pachiyappan S, Kumar S S

Int J Nanomedicine, 2019;14:8105-8119.
PMID: 31632021 DOI: 10.2147/IJN.S214236

Background: Super-paramagnetic iron oxide nanoparticles (SPIONs) are widely used metal nanoparticles for various applications for its magnetic property and biocompatibility. In recent years, pollution of our environment especially with heavy metals in waterbodies has become a major threat and has left us very minimal sources of freshwater to drink. SPIONs or surface modified SPIONs can be used to remove these heavy metals.
Methods: SPIONs were synthesized by co-precipitation method and further coated with a biopolymer, chitosan. Chromium solution was treated with the synthesized SPIONs to study the efficiency of chromium removal by surface adsorption. Later, the adsorption was analysed by direct and indirect analysis methods using UV-VIS spectrophotometry and isotherm studies.
Results: Stable chitosan-coated SPIONs were synthesized and they adsorbed chromium better than the uncoated SPIONs, where it was adsorbing up to 100 ppm. Adsorption was found to be increasing with decrease in pH.
Conclusion: The surface-modified SPIONs expressed cumulative adsorption action. Even after the adsorption studies, chitosan-coated SPIONs were possessing magnetic property. Thus, the surface-modified SPIONs can become an ideal nanotechnology tool to remove the chromium from groundwater.

Matched MeSH terms: Chromium/isolation & purification*
Flexibility and hardness of dental stainless steel wrought wires used in Thailand

Benjakul P, Cheunarrom C, Ongthiemsak C

J Oral Sci, 2001 Mar;43(1):15-9.
PMID: 11383631

Stainless steel wrought wires used as clasp arms for removable partial dentures in Thailand were compared with those used in some other countries (in the as-received condition) in terms of flexibility, Vickers microhardness and composition. The results showed that there were significant differences (P< or =0.05) among the wires. A Japanese stainless steel wire (SK) was obviously different from the others. It had the lowest proportional limit and microhardness, but its flexibility was almost the same. The chemical composition of each wire was not greatly different. The wires were about 18-20 wt% chromium and 8-9 wt% nickel, except for the SK wire, which had about 12 wt% nickel.

Matched MeSH terms: Chromium/analysis
Fulltext Role of Bacillus cereus in Improving the Growth and Phytoextractability of Brassica nigra (L.) K. Koch in Chromium Contaminated Soil

Akhtar N, Ilyas N, Yasmin H, Sayyed RZ, Hasnain Z, A Elsayed E, et al.

Molecules, 2021 Mar 12;26(6).
PMID: 33809305 DOI: 10.3390/molecules26061569

Plant growth-promoting rhizobacteria (PGPR) mediate heavy metal tolerance and improve phytoextraction potential in plants. The present research was conducted to find the potential of bacterial strains in improving the growth and phytoextraction abilities of Brassica nigra (L.) K. Koch. in chromium contaminated soil. In this study, a total of 15 bacterial strains were isolated from heavy metal polluted soil and were screened for their heavy metal tolerance and plant growth promotion potential. The most efficient strain was identified by 16S rRNA gene sequencing and was identified as Bacillus cereus. The isolate also showed the potential to solubilize phosphate and synthesize siderophore, phytohormones (indole acetic acid, cytokinin, and abscisic acid), and osmolyte (proline and sugar) in chromium (Cr+3) supplemented medium. The results of the present study showed that chromium stress has negative effects on seed germination and plant growth in B. nigra while inoculation of B. cereus improved plant growth and reduced chromium toxicity. The increase in seed germination percentage, shoot length, and root length was 28.07%, 35.86%, 19.11% while the fresh and dry biomass of the plant increased by 48.00% and 62.16%, respectively, as compared to the uninoculated/control plants. The photosynthetic pigments were also improved by bacterial inoculation as compared to untreated stress-exposed plants, i.e., increase in chlorophyll a, chlorophyll b, chlorophyll a + b, and carotenoid was d 25.94%, 10.65%, 20.35%, and 44.30%, respectively. Bacterial inoculation also resulted in osmotic adjustment (proline 8.76% and sugar 28.71%) and maintained the membrane stability (51.39%) which was also indicated by reduced malondialdehyde content (59.53% decrease). The antioxidant enzyme activities were also improved to 35.90% (superoxide dismutase), 59.61% (peroxide), and 33.33% (catalase) in inoculated stress-exposed plants as compared to the control plants. B. cereus inoculation also improved the uptake, bioaccumulation, and translocation of Cr in the plant. Data showed that B. cereus also increased Cr content in the root (2.71-fold) and shoot (4.01-fold), its bioaccumulation (2.71-fold in root and 4.03-fold in the shoot) and translocation (40%) was also high in B. nigra. The data revealed that B. cereus is a multifarious PGPR that efficiently tolerates heavy metal ions (Cr+3) and it can be used to enhance the growth and phytoextraction potential of B. nigra in heavy metal contaminated soil.

Matched MeSH terms: Chromium/pharmacokinetics*
Adsorption of copper (II), chromium (III), nickel (II) and lead (II) ions from aqueous solutions by meranti sawdust

Rafatullah M, Sulaiman O, Hashim R, Ahmad A

J Hazard Mater, 2009 Oct 30;170(2-3):969-77.
PMID: 19520510 DOI: 10.1016/j.jhazmat.2009.05.066

The present study proposed the use of meranti sawdust in the removal of Cu(II), Cr(III), Ni(II) and Pb(II) ions from synthetic aqueous solutions. Batch adsorption studies showed that meranti sawdust was able to adsorb Cu(II), Cr(III), Ni(II) and Pb(II) ions from aqueous solutions in the concentration range 1-200mg/L. The adsorption was favoured with maximum adsorption at pH 6, whereas the adsorption starts at pH 1 for all metal ions. The effects of contact time, initial concentration of metal ions, adsorbent dosage and temperature have been reported. The applicability of Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherm was tried for the system to completely understand the adsorption isotherm processes. The adsorption kinetics tested with pseudo-first-order and pseudo-second-order models yielded high R(2) values from 0.850 to 0.932 and from 0.991 to 0.999, respectively. The meranti sawdust was found to be cost effective and has good efficiency to remove these toxic metal ions from aqueous solution.

Matched MeSH terms: Chromium/isolation & purification
Photocatalytic magnetic separable beads for chromium (VI) reduction

Idris A, Hassan N, Mohd Ismail NS, Misran E, Yusof NM, Ngomsik AF, et al.

Water Res, 2010 Mar;44(6):1683-8.
PMID: 19963234 DOI: 10.1016/j.watres.2009.11.026

Magnetically separable photocatalyst beads containing nano-sized iron oxide in alginate polymer were prepared. This magnetic photocatalyst beads are used in slurry-type reactors. The magnetism of the catalyst arises from the nanostructured particles gamma-Fe(2)O(3), by which the catalyst can be easily recovered by the application of an external magnetic field. These synthesized beads are sunlight-driven photocatalyst. In the system without magnetic photocatalyst beads, no chromium reduction was observed under sunlight irradiation due to the stability of the chromium (VI). Upon the addition of magnetic photocatalyst beads, the photo-reduction of Cr(VI) was completed in just after only 50min under sunlight irradiation due to the photocatalytic activity of the beads. However when placed away from sunlight, the reduction rate of the chromium is just about 10%. These observations were explained in terms of absorption occurrence of chromium (VI) onto the catalyst surface which took place in this reaction. In addition, photo-reduction rate of chromium (VI) was more significant at lower pH. The results suggest that the use of magnetic separable photocatalyst beads is a feasible strategy for eliminating Cr(VI).

Matched MeSH terms: Chromium/chemistry*
Trend in metals variation in Tasik Chini, Pahang, Peninsular Malaysia

Shuhaimi-Othman M, Mushrifah I, Lim EC, Ahmad A

Environ Monit Assess, 2008 Aug;143(1-3):345-54.
PMID: 17987397

Water from 15 sampling stations in Tasik Chini (Chini Lake), Peninsular Malaysia were sampled for 12 months from September 2004 until August 2005 and analyzed for 11 metals including iron (Fe), aluminum (Al), manganese (Mn), barium (Ba), zinc (Zn), lead (Pb), copper (Cu), cadmium (Cd), nickel (Ni), chromium (Cr) and cobalt (Co). Results showed that the mean (min-max) metal concentrations (in micrograms per liter) in Tasik Chini waters for the 12 months sampling based on 15 sampling stations (in descending order) for Fe, Al, Mn, Ba, Zn, Pb, Cu and Cd were 794.84 (309.33-1609.07), 194.53 (62.37-665.93), 29.16 (16.68-79.85), 22.07 (15.64-29.71), 5.12 (2.224-6.553), 2.36 (1.165-4.240), 0.832 (0.362-1.443) and 0.421 (0.254-0.696) respectively. Concentration for three metals i.e. Ni, Cr and Co were too low and not detected by the graphite furnace Atomic Absorption Spectrophotometry (AAS). Comparison with various water quality standards showed that the mean metals concentration in surface water of Tasik Chini were low and within the range of natural background except for Fe and Al. In general, metal concentrations in Tasik Chini water varied temporally and spatially. The main factors influencing these metal concentrations in the water were the raining season and mining activities. Stations located at Tanjung Jerangking and Melai areas were the most effected due to those factors.

Matched MeSH terms: Chromium/analysis
Hexavalent chromium reduction by Acinetobacter haemolyticus isolated from heavy-metal contaminated wastewater

Zakaria ZA, Zakaria Z, Surif S, Ahmad WA

J Hazard Mater, 2007 Jul 19;146(1-2):30-8.
PMID: 17188812

Possible application of a locally isolated environmental isolate, Acinetobacter haemolyticus to remediate Cr(VI) contamination in water system was demonstrated. Cr(VI) reduction by A. haemolyticus seems to favour the lower concentrations (10-30 mg/L). However, incomplete Cr(VI) reduction occurred at 70-100 mg/L Cr(VI). Initial specific reduction rate increased with Cr(VI) concentrations. Cr(VI) reduction was not affected by 1 or 10 mM sodium azide (metabolic inhibitor), 10 mM of PO(4)3-, SO4(2-), SO(3)2-, NO3- or 30 mg/L of Pb(II), Zn(II), Cd(II) ions. However, heat treatment caused significant dropped in Cr(VI) reduction to less than 20% only. A. haemolyticus cells loses its shape and size after exposure to 10 and 50 mg Cr(VI)/L as revealed from TEM examination. The presence of electron-dense particles in the cytoplasmic region of the bacteria suggested deposition of chromium in the cells.

Matched MeSH terms: Chromium/metabolism*
Fulltext Estimating glomerular filtration rate in adult kidney transplant recipients in the Asian population

Kamaruzaman L, Mohd R, Zaki FM, Hod R, Aziz AA

Saudi J Kidney Dis Transpl, 2019 6 30;30(3):587-596.
PMID: 31249222 DOI: 10.4103/1319-2442.261331

Estimation of glomerular filtration rate (GFR) in renal transplant patients is often assessed by application of creatinine-based equations. The aim was to correlate the estimated GFR (eGFR) using creatinine-based equations [Cockroft-Gault, Modification of Diet in Renal Disease (MDRD), Chronic Kidney Disease Epidemiology Collaboration (CKD-EPI), Nankivell] with gold standard 51Cr-EDTA in kidney transplant patients in the Asian population. This is a single-center, cross-sectional study involving adult renal transplant patients. Background demographic data, medications, office blood pressure, and baseline investigations were taken. Correlations between measured GFR and eGFR were analyzed and Pearson's correlation coefficients, bias, and accuracy were assessed. Thirty-seven renal transplant patients with a mean age of 46 ± 13 years were recruited. Majority were Chinese (68%), Malay (24%), and Indian (8%). The median duration of the transplant was 84 (interquartile range 60,132) months. The mean measured GFR was 71 ± 21 mL/min/1.73 m2. Cockroft-Gault and CKD-EPI has the best correlation with 51Cr-EDTA with Pearson correlation coefficients of 0.733 (P <0.001) and 0.711 (P < 0.001), respectively. All formulae showed >80% accuracy with eGFR lies between 30% of the measured value. CKD-EPI and MDRD had the greatest accuracy with 89.2% each. Clinician may use any of these three serum creatinine-based equations to estimate GFR in kidney transplant recipients.

Matched MeSH terms: Chromium Radioisotopes/administration & dosage
Properties of the tray adhesive of an addition polymerizing silicone to impression tray materials

Sulong MZ, Setchell DJ

J Prosthet Dent, 1991 Dec;66(6):743-7.
PMID: 1805022

Adhesive bond strength studies for the tray adhesive of an addition vinyl polysiloxane (President) impression material were conducted with an acrylic resin, chromium-plated brass, and plastic trays. Tensile and shear stress studies were performed on the Instron Universal testing machine. Acrylic resin specimens roughened with 80-grit silicon carbide paper exhibited appreciably higher bond strengths compared with different types of tray material and methods of surface preparation.

Matched MeSH terms: Chromium/chemistry
Association of human papillomavirus with denture wearing

Saini R, Osman NB, Ismail M, Sobri FM, Tang TH, Santhanam J

J Investig Clin Dent, 2011 Nov;2(4):241-7.
PMID: 25426895 DOI: 10.1111/j.2041-1626.2011.00068.x

To determine the prevalence of human papillomavirus in the oral cavity of denture wearers.

Matched MeSH terms: Chromium Alloys/chemistry
Closed hollow bulb obturator--one-step fabrication: a clinical report

Buzayan MM, Ariffin YT, Yunus N

J Prosthodont, 2013 Oct;22(7):591-5.
PMID: 23551843 DOI: 10.1111/jopr.12036

A method is described for the fabrication of a closed hollow bulb obturator prosthesis using a hard thermoforming splint material and heat-cured acrylic resin. The technique allowed the thickness of the thermoformed bulb to be optimized for weight reduction, while the autopolymerized seal area was covered in heat-cured acrylic resin, thus eliminating potential leakage and discoloration. This technique permits the obturator prosthesis to be processed to completion from the wax trial denture without additional laboratory investing, flasking, and processing.

Matched MeSH terms: Chromium Alloys/chemistry
Zygomatic implant-retained fixed complete denture for an elderly patient

Baig MR, Rajan G, Yunus N

Gerodontology, 2012 Jun;29(2):e1140-5.
PMID: 21615782 DOI: 10.1111/j.1741-2358.2010.00433.x

Dental rehabilitation of a completely edentulous geriatric patient has always been a challenge to the clinician, especially in treating those with higher expectations and demands. Treatment duration and the amount of residual alveolar bone available are often important considerations when planning for dental implant-based fixed treatment for these patients. With the introduction of zygomatic implants, a graftless alternative solution has emerged for deficient maxillary bone with provision for immediate loading. This article describes the treatment of a completely edentulous elderly patient using zygomatic implants in conjunction with conventional implants. The implants were immediately loaded using a definitive acrylic resin fixed denture reinforced with a cast metal framework, to provide function and aesthetics.

Matched MeSH terms: Chromium Alloys/chemistry
Evaluation of load at fracture of Procera AllCeram copings using different luting cements

Al-Makramani BMA, Razak AAA, Abu-Hassan MI

J Prosthodont, 2008 Feb;17(2):120-124.
PMID: 18047490 DOI: 10.1111/j.1532-849X.2007.00270.x

PURPOSE: The current study investigated the effect of different luting agents on the fracture resistance of Procera AllCeram copings.
METHODS: Six master dies were duplicated from the prepared maxillary first premolar tooth using nonprecious metal alloy (Wiron 99). Thirty copings (Procera AllCeram) of 0.6-mm thickness were manufactured. Three types of luting media were used: zinc phosphate cement (Elite), glass ionomer cement (Fuji I), and dual-cured composite resin cement (Panavia F). Ten copings were cemented with each type. Two master dies were used for each group, and each of them was used to lute five copings. All groups were cemented according to manufacturer's instructions and received a static load of 5 kg during cementation. After 24 hours of distilled water storage at 37 degrees C, the copings were vertically compressed using a universal testing machine at a crosshead speed of 1 mm/min.
RESULTS: ANOVA revealed significant differences in the load at fracture among the three groups (p < 0.001). The fracture strength results showed that the mean fracture strength of zinc phosphate cement (Elite), glass ionomer cement (Fuji I), and resin luting cement (Panavia F) were 1091.9 N, 784.8 N, and 1953.5 N, respectively.
CONCLUSION: Different luting agents have an influence on the fracture resistance of Procera AllCeram copings.

Matched MeSH terms: Chromium Alloys/chemistry
Synthesis of chitosan/polyvinyl alcohol/zeolite composite for removal of methyl orange, Congo red and chromium(VI) by flocculation/adsorption

Habiba U, Siddique TA, Joo TC, Salleh A, Ang BC, Afifi AM

Carbohydr Polym, 2017 Feb 10;157:1568-1576.
PMID: 27987870 DOI: 10.1016/j.carbpol.2016.11.037

A chitosan/polyvinyl alcohol (PVA)/zeolite composite was fabricated in this study. The composite was analyzed through field emission scanning electron microscopy, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis, and weight loss test. FTIR and XRD results revealed a strong interaction among chitosan, PVA, and zeolite. Weight loss test results indicated that the composite was stable in acidic and basic media. Congo red was removed through flocculation, and the removal rate was 94% at an initial concentration of 100mg/L for a dose of 1g/L. The removal rate of methyl orange was controlled by adsorption at an initial concentration of less than 100mg/L. Flocculation occurred at high concentrations. The removal rate was also 94% at an initial concentration of 500mg/L for a dose of 5g/L. The adsorption behavior of the composite for the removal of methyl orange and Cr(VI) was described by using a pseudo-second-order kinetic model. The adsorption capacity of the composite for Cr(VI) was 450mg/g. Therefore, the synthesized composite exhibited versatility during the removal of dyes and heavy metals.

Matched MeSH terms: Chromium
Fulltext The association of reported respiratory symptoms among children in Malaysia with particulate matter exposure in municipal solid waste landfills

Dora Esphylin, Sharifah Norkhadijah Syed Ismail, Sarva Mangala Praveena, Zailina Hashim, Emilia Zainal Abidin

Malaysian Journal of Medicine and Health Sciences, 2018;14(101):2-11.
MyJurnal

Background: Prolonged exposure of heavy metals in the respirable particulate matter (PM10) from municipal solid waste (MSW) landfills may affect children health. Objective: To investigate the association of reported respiratory symptom with heavy metals in PM10, with heavy metals in fingernails among children residing close to MSW landfills. Methods: Two groups of children age 7 to 12 years old were involved in this cross-sectional study. Those residing within 3 km radius from a landfill were the exposed group and those residing more than 3 km radius as the unexposed group. Questionnaires adapted from American Thoracic Society were applied in the survey. Fingernails were used as biomarker. Ten heavy metals elements in PM and fingernail samples were analysed using inductively coupled plasma mass spectrometry (ICP-MS). Results: The cadmium, chromium, copper, manganese, nickel and lead concentrations in PM around the MSW landfills and residential areas exceeded the Canada and USEPA standard permissible limit. Heavy metals in fingernails (p

Matched MeSH terms: Chromium
Fulltext A rapid inhibitive enzyme assay for monitoring heavy metals pollution in the Juru Industrial Estate

Halmi, M.I.E., Baskaran Gunasekaran, Othman, A.R., Shukor, M.Y., Kamaruddin, K., Dahalan, F.A., et al.

Bioremediation Science and Technology Research, 2015;3(2):7-12.
MyJurnal

The volume of contaminated rivers in Malaysia continues to keep rising through the years. The
cost of instrumental monitoring is uneconomical and prohibits schedule monitoring of
contaminants particularly heavy metals. In this work, a rapid enzyme assay utilizing the
molybdenum-reducing enzyme as an inhibitive assay, prepared in crude form from the
molybdenum-reducing bacterium Serratia sp. strain DRY5 has been developed for monitoring
the heavy metals mercury, silver, copper and chromium in contaminated waters in the Juru
Industrial Estate. The crude enzyme extract transformed soluble molybdenum
(phosphomolybdate) into a deep blue solution, which is inhibited by heavy metals such as
mercury, silver, copper and chromium. The IC50 and Limits of Detection (LOD) values for
mercury, copper, silver and cadmium were 0.245, 0.298, 0.367, 0.326, and 0.124, 0.086, 0.088
and 0.094 mg L-1, respectively. The assay is rapid, and can be carried out in less than 10 minutes.
In addition, the assay can be carried out at ambient temperature. The IC50 values for these heavy
metals are more sensitive than several established assays. Water samples from various locations
in the month of November from the Juru Industrial Estate (Penang) were tested for the presence
of heavy metals using the developed assay. Enzyme activity was nearly inhibited for water
samples from several locations. The presence of heavy metals was confirmed instrumentally
using Atomic Emission Spectrometry and a Flow Injection Mercury System. The assay is rapid
and simple and can be used as a first screening method for large scale monitoring of heavy
metals.

Matched MeSH terms: Chromium
Fulltext Consumption of Manjakani among postpartum mothers and risk of heavy metal contamination

Normina Ahmad Bustami, Yu Bin Ho, Chung Keat Tan, Ahmad Zaharin Aris, Eugenie Sin Sing Tan

Malaysian Journal of Medicine and Health Sciences, 2020;16(2):75-82.
MyJurnal

Introduction: In Malaysia, herbal medicines are used for variety of reasons including health promotion and home remedies during pregnancy and postpartum with Manjakani (Quercus infectoria) as one of the most commonly consumed herbs. Herbal medicines consumption had been linked to heavy metals contamination and transfer from mother to infant and may affect infant’s growth and development. This study aims to (i) determine Manjakani consumption among postpartum mothers, (ii) quantify its heavy metals level, namely lead, cadmium, arsenic and chromium, and (iii) determine health risk associated with its consumption. Methods: A cross-sectional study involving 106 postpartum mothers was carried out in Kuala Lumpur. Six samples of Manjakani were sampled and extracted using microwave digester and analysed using Inductively coupled plasma mass spectrometry (ICP-MS). Non-carcinogenic health risks for herbal medicine consumption were calculated using Hazard Quotient (HQ). Results: Manjakani was consumed by 16% of mothers (n=17). Highest level of the metals was shown by chromium with mean concentration of 4210 ± 1910 ug/kg, followed by lead (170.8 ± 193.2), arsenic (39.3 ± 27.1) and cadmium (7.7 ± 0.76). There were no significant non-carcinogenic health risks with lead, arsenic, chromium and cadmium contamination (HQ < 1). Conclusion: Manjakani is consumed by mothers during confinement period. Heavy metals were quantified in Manjakani although no significant association was observed with socio-demographic characteristics and birth outcomes.

Matched MeSH terms: Chromium
Fulltext Waste Fiber-Based Poly(hydroxamic acid) Ligand for Toxic Metals Removal from Industrial Wastewater

Rahman ML, Wong ZJ, Sarjadi MS, Joseph CG, Arshad SE, Musta B, et al.

Polymers (Basel), 2021 May 06;13(9).
PMID: 34066308 DOI: 10.3390/polym13091486

Toxic metals in the industrial wastewaters have been liable for drastic pollution hence a powerful and economical treatment technology is needed for water purification. For this reason, some pure cellulosic materials were derived from waste fiber to obtain an economical adsorbent for wastewater treatment. Conversion of cellulose into grafting materials such as poly(methyl acrylate)-grafted cellulose was performed by free radical grafting process. Consequently, poly(hydroxamic acid) ligand was produced from the grafted cellulose. The intermediate products and poly(hydroxamic acid) ligand were analyzed by FT-IR, FE-SEM, TEM, EDX, and XPS spectroscopy. The adsorption capacity (qe) of some toxic metals ions by the polymer ligand was found to be excellent, e.g., copper capacity (qe) was 346.7 mg·g-1 at pH 6. On the other hand, several metal ions such as cobalt chromium and nickel also demonstrated noteworthy sorption capacity at pH 6. The adsorption mechanism obeyed the pseudo second-order rate kinetic model due to the satisfactory correlated experimental sorption values (qe). Langmuir model isotherm study showed the significant correlation coefficient with all metal ions (R2 > 0.99), indicating that the single or monolayer adsorption was the dominant mode on the surface of the adsorbent. This polymer ligand showed good properties on reusability. The result shows that the adsorbent may be recycled for 6 cycles without any dropping of starting sorption capabilities. This polymeric ligand showed outstanding toxic metals removal magnitude, up to 90-99% of toxic metal ions can be removed from industrial wastewater.

Matched MeSH terms: Chromium
Fulltext Heavy metals in Danggui (Angelica sinensis) consumed by postpartum mothers and its health risk

Normina Ahmad Bustami, Yu Bin Ho, Chung Keat Tan, Ahmad Zaharin Aris, Eugenie Sin Sing Tan

Malaysian Journal of Medicine and Health Sciences, 2020;16(3):113-117.
MyJurnal

Introduction: Consumption of Chinese Herbal Medicine (CHMs) have escalated globally. They are preferred treat- ment for minor diseases or disorders. In Malaysia, CHMs are common home remedies during pregnancy and postpar- tum. Angelica sinensis (Danggui) is a staple CHMs during postpartum for purpose of nourishing blood and resolving stasis. Concerns are raised over possible heavy metals toxicity. Objective: This study aims to (i) determine Danggui consumption among postpartum mothers, (ii) quantify its heavy metals level, namely Lead (Pb), Cadmium (Cd), Ar- senic (As) and Chromium (Cr) and (iii) determine health risks of Danggui consumption among mothers. Methods: A cross-sectional study involving 112 postpartum mothers was carried out in Kuala Lumpur. Danggui samples were collected from nine districts in Kuala Lumpur (Segambut, Seputeh, Cheras, Kepong, Bandar Tun Razak, Titiwangsa, Setiawangsa, Batu and Lembah Pantai). Heavy metals were extracted using microwave digester and analysed using Inductively coupled plasma mass spectrometry (ICPMS). Hazard Quotient (HQ) was used to determine non-carcino- genic health risks for herbal medicine consumption. Results: Danggui was consumed by 19.6% of mothers (n=22). Among them, incidence of jaundice was 63.6% and need for phototherapy was 40.9%. Heavy metals contamina- tions were found in the decreasing order of Cr > As > Pb > Cd with median (interquartile) of 3996.3 (2805.6) μg/ kg, 128.3 (56.7), 98.6 (99.1) and 37.0 (35.0) respectively. No non-carcinogenic health risks were found for all four metals. Conclusion: Alarming concentrations of heavy metals were quantified in Danggui warranting for further in- vestigation to safeguard health of postpartum mothers.

Matched MeSH terms: Chromium
Fulltext Antibiogram and heavy metal tolerance of bullfrog bacteria in Malaysia

Tee LW, Najiah M

Open Vet J, 2011;1(1):39-45.
PMID: 26623279

Bacterial isolates from 30 farmed bullfrogs (Lithobates catesbeianus) weighing 500-600 g at Johore, Malaysia with external clinical signs of ulcer, red leg and torticollis were tested for their antibiograms and heavy metal tolerance patterns. A total of 17 bacterial species with 77 strains were successfully isolated and assigned to 21 antibiotics and 4 types of heavy metal (Hg(2+), Cr(6+), Cd(2+), Cu(2+)). Results revealed that bacteria were resistant against lincomycin (92%), oleandomycin (72.7%) and furazolidone (71.4%) while being susceptible to chloramphenicol and florfenicol at 97.4%. The multiple antibiotic resistance (MAR) index for C. freundii, E. coli and M. morganii was high with the value up to 0.71. Bacterial strains were found to exhibit 100 % resistance to chromium and mercury. High correlation of resistance against both antibiotics and heavy metals was found (71.4 to 100%) between bullfrog bacteria isolates, except bacteria that were resistant to kanamycin showed only 25% resistance against Cu(2+). Based on the results in this study, bacterial pathogens of bullfrog culture in Johore, Malaysia, were highly resistant to both antibiotics and heavy metals.

Matched MeSH terms: Chromium

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links