MyMedR

Displaying publications 141 - 160 of 667 in total

Abstract:

Sort:

Fulltext Multivariate analysis of factors affecting presence and/or agenesis of third molar tooth

Alam MK, Hamza MA, Khafiz MA, Rahman SA, Shaari R, Hassan A

PLoS One, 2014;9(6):e101157.
PMID: 24967595 DOI: 10.1371/journal.pone.0101157

To investigate the presence and/or agenesis of third molar (M3) tooth germs in orthodontics patients in Malaysian Malay and Chinese population and evaluate the relationship between presence and/or agenesis of M3 with different skeletal malocclusion patterns and sagittal maxillomandibular jaw dimensions. Pretreatment records of 300 orthodontic patients (140 males and 160 females, 219 Malaysian Malay and 81 Chinese, average age was 16.27±4.59) were used. Third-molar agenesis was calculated with respect to race, genders, number of missing teeth, jaws, skeletal malocclusion patterns and sagittal maxillomandibular jaw dimensions. The Pearson chi-square test and ANOVA was performed to determine potential differences. Associations between various factors and M3 presence/agenesis groups were assessed using logistic regression analysis. The percentages of subjects with 1 or more M3 agenesis were 30%, 33% and 31% in the Malaysian Malay, Chinese and total population, respectively. Overall prevalence of M3 agenesis in male and female was equal (P>0.05). The frequency of the agenesis of M3s is greater in maxilla as well in the right side (P>0.05). The prevalence of M3 agenesis in those with a Class III and Class II malocclusion was relatively higher in Malaysian Malay and Malaysian Chinese population respectively. Using stepwise regression analyses, significant associations were found between Mx (P<0.05) and ANB (P<0.05) and M3 agenesis. This multivariate analysis suggested that Mx and ANB were significantly correlated with the M3 presence/agenesis.

Matched MeSH terms: Analysis of Variance
Fulltext A comparison of central composite design and Taguchi method for optimizing Fenton process

Asghar A, Abdul Raman AA, Daud WM

ScientificWorldJournal, 2014;2014:869120.
PMID: 25258741 DOI: 10.1155/2014/869120

In the present study, a comparison of central composite design (CCD) and Taguchi method was established for Fenton oxidation. [Dye]ini, Dye:Fe(+2), H2O2:Fe(+2), and pH were identified control variables while COD and decolorization efficiency were selected responses. L 9 orthogonal array and face-centered CCD were used for the experimental design. Maximum 99% decolorization and 80% COD removal efficiency were obtained under optimum conditions. R squared values of 0.97 and 0.95 for CCD and Taguchi method, respectively, indicate that both models are statistically significant and are in well agreement with each other. Furthermore, Prob > F less than 0.0500 and ANOVA results indicate the good fitting of selected model with experimental results. Nevertheless, possibility of ranking of input variables in terms of percent contribution to the response value has made Taguchi method a suitable approach for scrutinizing the operating parameters. For present case, pH with percent contribution of 87.62% and 66.2% was ranked as the most contributing and significant factor. This finding of Taguchi method was also verified by 3D contour plots of CCD. Therefore, from this comparative study, it is concluded that Taguchi method with 9 experimental runs and simple interaction plots is a suitable alternative to CCD for several chemical engineering applications.

Matched MeSH terms: Analysis of Variance
Fulltext A study assessing the impact of different teaching modalities for pharmacy students in a Cardio-Pulmonary Resuscitation (CPR) course

Khan TM, Hassali MA, Rasool ST

Saudi Pharm J, 2013 Oct;21(4):375-8.
PMID: 24227957 DOI: 10.1016/j.jsps.2012.11.002

The current study aims to assess the effectiveness of different teaching methods adopted for the practical session of Cardio-Pulmonary Resuscitation (CPR). CPR training is one of the compulsory modules of the Public Health Pharmacy (PHP) course at Universiti Sains Malaysia. CPR training comprises of 10% of total marks of the PHP course. To test the effectiveness of the different teaching strategies, three groups were defined using a two-stage cohort distribution-i.e. based on grade point average (GPA) and different teaching modalities. Group One was instructed using images and PowerPoint lecture slides. Group Two was instructed using videos and PowerPoint lecture slides. Group Three was instructed using PowerPoint slides with white boards and videos. Students in Group Three were not provided with a hard/soft copy of the PowerPoint slides and were encouraged to write down all the information on their personal notebooks. A 20-item questionnaire was used to assess the students' understanding toward the CPR session. Data were analyzed using the Statistical Package for Social Science Students, SPSS version 13®. Based on the response attained, the comparison of the final score among the groups was undertaken using one way ANOVA. Twenty-seven students have participated in this study. Final evaluation using the questionnaire revealed that student's in Group Three had a better understanding of CPR (18.1 ± 1.5, p <0.001) than the other two. Students' note taking during the lecture and use of traditional chalkboard teaching were found significant to improve the students' understanding and learning in the CPR session.

Matched MeSH terms: Analysis of Variance
Surface electromyographic analysis of the biceps brachii muscle of cricket bowlers during bowling

Ahamed NU, Sundaraj K, Ahmad B, Rahman M, Ali MA, Islam MA

Australas Phys Eng Sci Med, 2014 Mar;37(1):83-95.
PMID: 24477560 DOI: 10.1007/s13246-014-0245-1

Cricket bowling generates forces with torques on the upper limb muscles and makes the biceps brachii (BB) muscle vulnerable to overuse injury. The aim of this study was to investigate whether there are differences in the amplitude of the EMG signal of the BB muscle during fast and spin delivery, during the seven phases of both types of bowling and the kinesiological interpretation of the bowling arm for muscle contraction mechanisms during bowling. A group of 16 male amateur bowlers participated in this study, among them 8 fast bowlers (FB) and 8 spin bowlers (SB). The root mean square (EMGRMS), the average sEMG (EMGAVG), the maximum peak amplitude (EMGpeak), and the variability of the signal were calculated using the coefficient of variance (EMGCV) from the BB muscle of each bowler (FB and SB) during each bowling phase. The results demonstrate that, (i) the BB muscle is more active during FB than during SB, (ii) the point of ball release and follow-through generated higher signals than the other five movements during both bowling categories, (iii) the BB muscle variability is higher during SB compared with FB, (iv) four statistically significant differences (p<0.05) found between the bowling phases in fast bowling and three in spin bowling, and (v) several arm mechanics occurred for muscle contraction. There are possible clinical significances from the outcomes; like, recurring dynamic contractions on BB muscle can facilitate to clarify the maximum occurrence of shoulder pain as well as biceps tendonitis those are medically observed in professional cricket bowlers, and treatment methods with specific injury prevention programmes should focus on the different bowling phases with the maximum muscle effect. Finally, these considerations will be of particular importance in assessing different physical therapy on bowler's muscle which can improve the ball delivery performance and stability of cricket bowlers.

Matched MeSH terms: Analysis of Variance
Fulltext Stability analysis of oil yield in oil palm (Elaeis guineensis) progenies in different environments

Rafii MY, Jalani BS, Rajanaidu N, Kushairi A, Puteh A, Latif MA

Genet. Mol. Res., 2012;11(4):3629-41.
PMID: 23096688 DOI: 10.4238/2012.October.4.10

We evaluated 38 dura x pisifera (DP) oil palm progenies in four locations in Malaysia for genotype by environment interaction and genotypic stability studies. The DP progenies derived from crosses between pisifera palms of AVROS, Serdang S27B, Serdang 29/36, and Lever Cameroon were chosen to be the males' parent and Deli dura palms designated as females' parent. All the locations differed in terms of soil physical and chemical properties, and the soil types ranged from coastal clay to inland soils. The genotype by environment interaction and stability of the individual genotypes were analyzed for oil yield trait using several stability techniques. A genotype by environment interaction was detected for oil yield and it had a larger variance component than genotypic variance (σ(2)(gl)/σ(2)(g) = 139.7%). Genotype by environment interaction of oil yield was largely explained by a non-linear relationship between genotypic and environmental values. Overall assessment of individual genotypic stability showed that seven genotypes were highly stable and had consistent performance over the environments for the oil yield trait [total individual genotype stability scored more than 10 and mean oil yielded above the average of the environment (genotype means are more than 34.37 kg·palm(-1)·year(-1))]. These genotypes will be useful for oil palm breeding and tissue culture programs for developing high oil yielding planting materials with stable performance.

Matched MeSH terms: Analysis of Variance
Water sorption characteristics of restorative dental composites immersed in acidic drinks

Rahim TN, Mohamad D, Md Akil H, Ab Rahman I

Dent Mater, 2012 Jun;28(6):e63-70.
PMID: 22480722 DOI: 10.1016/j.dental.2012.03.011

To determine the diffusion coefficient, water sorption and solubility of various types of restorative dental composites and to evaluate the effect of acidic media (orange juice and coke) on their characteristics.

Matched MeSH terms: Analysis of Variance
Fulltext Physical activity and associated factors among young adults in Malaysia: an online exploratory survey

Sreeramareddy CT, Majeed Kutty NA, Razzaq Jabbar MA, Boo NY

Biosci Trends, 2012 Jun;6(3):103-9.
PMID: 22890157 DOI: 10.5582/bst.2012.v6.3.103

The burden of non-communicable diseases is increasing in Malaysia. Insufficient Physical Activity, which is an important risk factor for non-communicable diseases, is less researched in Malaysia. We aimed to assess the level of physical activity and identify its correlates. An online survey was carried out during October, 2011 in the University Tunku Abdul Rahman by the opinion poll research committee. Young adults answered the Short International Physical Activity Questionnaire and a questionnaire about factors according to a socio-ecological model which was adapted from published studies. Metabolic equivalent (MET)-hours and MET-minutes were calculated. Physical activity was classified as sufficient when MET-minutes were > 840. The mean age of the 474 participants was 22.4 years (S.D. = 4.7), and 253 (53.4%) were females. Their mean and median of MET-hours of PA done during the previous seven days were 31.36 (S.D., 52.19) and 14.7 (IQR, 5.77-32.07), respectively. Physical activity done was sufficient among 242 (51.1%) participants. Using univariate analysis, being male, good self-rated health, positive intention, self-efficacy, perceived benefits, social support, and availability of facilities were associated with sufficient physical activity. Using multivariate analysis sufficient physical activity was associated with participants' intention (OR 0.75, 95% CIs 0.64, 0.88), self-efficacy (OR 0.91, 95% CIs 0.85, 0.97) and facility availability (OR 0.81, 95% CIs 0.73, 0.91). The proportion of participants with sufficient physical activity was low. Positive intention and self-efficacy associated with sufficient physical activity should be supported by availability of facilities and a safely-built environment. A nationwide survey about physical and associated socialecological factors is needed to design rational health promotion strategies.

Matched MeSH terms: Analysis of Variance
Multiple regression analysis of factors influencing dominant hand grip strength in an adult Malaysian population

Hossain MG, Zyroul R, Pereira BP, Kamarul T

J Hand Surg Eur Vol, 2012 Jan;37(1):65-70.
PMID: 21816889 DOI: 10.1177/1753193411414639

Grip strength is an important measure used to monitor the progression of a condition, and to evaluate outcomes of treatment. We assessed how various physical and social factors predict normal grip strength in an adult Malaysian population of mixed Asian ethnicity (254 men, 246 women). Grip strength was recorded using the Jamar dynamometer. The mean grip strength for the dominant hand was 29.8 kg for men and 17.6 kg for women. Multiple regression analysis demonstrated that the dominant hand grip strength was positively associated with height and body mass index, and negatively associated with age for both sexes. Dominant hand grip strength was related to work status for men (p

Matched MeSH terms: Analysis of Variance
Fulltext Assessment of factors influencing morale in the elderly

Loke SC, Abdullah SS, Chai ST, Hamid TA, Yahaya N

PLoS One, 2011;6(1):e16490.
PMID: 21283551 DOI: 10.1371/journal.pone.0016490

We examined the relationship between morale measured by the Philadelphia Geriatric Morale Scale (PGC) and disability, social support, religiosity, and personality traits. Instruments predicting morale were then tested against PGC domains.

Matched MeSH terms: Analysis of Variance
Fulltext Response Ant Colony Optimization of end milling surface roughness

Kadirgama K, Noor MM, Abd Alla AN

Sensors (Basel), 2010;10(3):2054-63.
PMID: 22294914 DOI: 10.3390/s100302054

Metal cutting processes are important due to increased consumer demands for quality metal cutting related products (more precise tolerances and better product surface roughness) that has driven the metal cutting industry to continuously improve quality control of metal cutting processes. This paper presents optimum surface roughness by using milling mould aluminium alloys (AA6061-T6) with Response Ant Colony Optimization (RACO). The approach is based on Response Surface Method (RSM) and Ant Colony Optimization (ACO). The main objectives to find the optimized parameters and the most dominant variables (cutting speed, feedrate, axial depth and radial depth). The first order model indicates that the feedrate is the most significant factor affecting surface roughness.

Matched MeSH terms: Analysis of Variance
Optimization of microporous palm shell activated carbon production for flue gas desulphurization: experimental and statistical studies

Sumathi S, Bhatia S, Lee KT, Mohamed AR

Bioresour Technol, 2009 Feb;100(4):1614-21.
PMID: 18952414 DOI: 10.1016/j.biortech.2008.09.020

Optimizing the production of microporous activated carbon from waste palm shell was done by applying experimental design methodology. The product, palm shell activated carbon was tested for removal of SO2 gas from flue gas. The activated carbon production was mathematically described as a function of parameters such as flow rate, activation time and activation temperature of carbonization. These parameters were modeled using response surface methodology. The experiments were carried out as a central composite design consisting of 32 experiments. Quadratic models were developed for surface area, total pore volume, and microporosity in term of micropore fraction. The models were used to obtain the optimum process condition for the production of microporous palm shell activated carbon useful for SO2 removal. The optimized palm shell activated carbon with surface area of 973 m(2)/g, total pore volume of 0.78 cc/g and micropore fraction of 70.5% showed an excellent agreement with the amount predicted by the statistical analysis. Palm shell activated carbon with higher surface area and microporosity fraction showed good adsorption affinity for SO2 removal.

Matched MeSH terms: Analysis of Variance
Vessel density ratio: A novel approach to identify "culprit" coronary lesion by spiral computed tomography

Chin BS, Ong TK, Seyfarth TM, Liew CK, Chan WL, Rapaee A, et al.

J Comput Assist Tomogr, 2006 7 18;30(4):564-8.
PMID: 16845284

BACKGROUND AND OBJECTIVE: We hypothesized that a "culprit" lesion in acute coronary syndrome (ACS) should have low overall vessel lumen and plaque density on multidetector computed tomography-assisted coronary angiography (MDCTA) because of lower calcification and the presence of occlusive thrombus. However, thrombi and calcification both can themselves blur the demarcation between vessel wall and lumen. If we calculated a "vessel density ratio" (VDR) obtained by measuring the mean density of contrast-enhancement within a region of interest (ROI), which includes the vessel wall, lumen, plaque, and thrombus, and comparing that with the aortic root mean density acting as a reference point, this ratio may be more convenient, standardized, and reproducible to test the feasibility of VDR in identifying "culprit" lesions in ACS.
METHODS: Sixty-four patients-21 exertional angina; 17 unstable angina/non-ST elevation myocardial infarction (NSTEMI); 26 ST elevation myocardial infarction (STEMI)-provided 188 diseased segments on conventional angiography. All underwent MDCTA within a week of angiography. ROI was mapped out from maximum intensity projections of diseased segments in planar view.
RESULTS: One hundred seventy-four segments were evaluated. Patients who presented with ACS (STEMI and unstable angina/non-ST elevation myocardial infarction) had lower mean VDR compared to patients with exertional angina (0.58 vs. 0.66 vs. 0.81; P < 0.001). Culprit lesions in ACS patients also had the lowest mean VDR when compared to nonculprit lesions and lesions in patients without ACS (0.51 vs. 0.68 vs. 0.81; P < 0.001).
CONCLUSIONS: VDR is a new, convenient, and standardized approach in identifying "culprit" lesions by MDCTA.

Matched MeSH terms: Analysis of Variance
Changes in transversus abdominis muscle thickness after lumbo-pelvic core stabilization training among chronic low back pain individuals

Leonard JH, Paungmali A, Sitilertpisan P, Pirunsan U, Uthaikhup S

Clin Ter, 2015;166(5):e312-6.
PMID: 26550815 DOI: 10.7417/T.2015.1884

OBJECTIVE: Lumbo-pelvic core stabilization training (LPST) is one of the therapeutic exercises common in practice for rehabilitation of patients with chronic low back pain. This study was carried out to examine the therapeutic effects of LPST on the muscle thickness of transversus abdominis (TrA) at rest and during contraction among patients with chronic non-specific low back pain.
MATERIALS AND METHODS: A total of 25 participants (7 males and 18 females) with chronic non-specific low back pain participated in a within-subject, repeated measures, double-blinded, placebo-controlled comparisons trial. The participants received three different types of experimental therapeutic training conditions which includes the lumbo-pelvic core stabilization training (LPST), the placebo treatment with passive cycling (PC) and a controlled intervention with rest (CI). The interventions were carried out by randomization with 48 hours between the sessions. The effectiveness of interventions was studied by measuring the changes in muscle thickness of TrA at rest and during contraction using a real time ultrasonography.
RESULTS: Repeated measures ANOVA demonstrated that the LPST provided significant therapeutic benefits as measured by an increase in the muscle thickness of the TrA at rest (p<0.05) and during contraction (p<0.01). The percentage change of the muscle thickness observed during LPST was significantly higher (p<0.01) when compared to the other two experimental training conditions.
CONCLUSIONS: The findings indicated that the LPST might provide therapeutic benefits by increasing the muscle thickness and function of TrA. Therefore, it is suggested that LPST technique should be considered as part of management program for treatment of low back pain.
KEYWORDS: Back pain; Core stabilization; Lumbo-pelvic exercise; Rehabilitation; Transversus abdominis

Matched MeSH terms: Analysis of Variance
Polishing of treated palm oil mill effluent (POME) from ponding system by electrocoagulation process

Bashir MJ, Mau Han T, Jun Wei L, Choon Aun N, Abu Amr SS

Water Sci Technol, 2016;73(11):2704-12.
PMID: 27232407 DOI: 10.2166/wst.2016.123

As the ponding system used to treat palm oil mill effluent (POME) frequently fails to satisfy the discharge standard in Malaysia, the present study aimed to resolve this problem using an optimized electrocoagulation process. Thus, a central composite design (CCD) module in response surface methodology was employed to optimize the interactions of process variables, namely current density, contact time and initial pH targeted on maximum removal of chemical oxygen demand (COD), colour and turbidity with satisfactory pH of discharge POME. The batch study was initially designed by CCD and statistical models of responses were subsequently derived to indicate the significant terms of interactive process variables. All models were verified by analysis of variance showing model significances with Prob > F < 0.01. The optimum performance was obtained at the current density of 56 mA/cm(2), contact time of 65 min and initial pH of 4.5, rendering complete removal of colour and turbidity with COD removal of 75.4%. The pH of post-treated POME of 7.6 was achieved, which is suitable for direct discharge. These predicted outputs were subsequently confirmed by insignificant standard deviation readings between predicted and actual values. This optimum condition also permitted the simultaneous removal of NH3-N, and various metal ions, signifying the superiority of the electrocoagulation process optimized by CCD.

Matched MeSH terms: Analysis of Variance
Undercorrection of myopia enhances rather than inhibits myopia progression

Chung K, Mohidin N, O'Leary DJ

Vision Res, 2002 Oct;42(22):2555-9.
PMID: 12445849

The effect of myopic defocus on myopia progression was assessed in a two-year prospective study on 94 myopes aged 9-14 years, randomly allocated to an undercorrected group or a fully corrected control group. The 47 experimental subjects were blurred by approximately +0.75 D (blurring VA to 6/12), while the controls were fully corrected. Undercorrection produced more rapid myopia progression and axial elongation (ANOVA, F(1,374)=14.32, p<0.01). Contrary to animal studies, myopic defocus speeds up myopia development in already myopic humans. Myopia could be caused by a failure to detect the direction of defocus rather than by a mechanism exhibiting a zero-point error.

Matched MeSH terms: Analysis of Variance
Screening of lead exposure among workers in Selangor and Federal Territory in Malaysia

Surif S, Chai CY

Environ Pollut, 1995;88(2):177-81.
PMID: 15091558

The study of lead exposure among workers in Selangor and the Federal Territory was carried out based on the delta-aminolevulinic acid (ALA) level in urine. Occupations which are expected to have higher lead exposure were chosen in this research. The ALA level in the workers' urine was linked to a few variables which may contribute to the lead level in the body. The result of this study showed that the ALA level of the urine of university students (0.352 +/- 0.038 mg/100 ml) < clerical staff (0.560 +/- 0.043 mg/100 ml) < traffic police (0.612 +/- 0.064 mg/100 ml) < vehicle workshop workers (0.673 +/- 0.099 mg/100 ml) < petrol kiosk workers (0.717 +/- 0.069 mg/100 ml) < bus drivers/conductors (0.850 +/- 0.055 mg/100 ml) which was similar to workers in the printing industry (0.852 +/- 0.110 mg/100 ml). The ALA levels in the urine of the exposed workers were significantly different from the control group (university students). However, results obtained from clerical staff revealed that they were also in the exposed group category. Analysis of variance showed that the exposed groups are in a population which is different from the control population. Correlation tests suggest that there is no significant connection between the ALA level in the urine and the variables tested. Furthermore, Duncan's Multiple Range Test showed no significant differences between the smoking/non smoking group, alcoholic/non-alcoholic group, race and sex (p > 0.05).

Matched MeSH terms: Analysis of Variance
Is talking to an automated teller machine natural and fun?

Chan FY, Khalid HM

Ergonomics, 2003 Oct-Nov;46(13-14):1386-407.
PMID: 14612327

Usability and affective issues of using automatic speech recognition technology to interact with an automated teller machine (ATM) are investigated in two experiments. The first uncovered dialogue patterns of ATM users for the purpose of designing the user interface for a simulated speech ATM system. Applying the Wizard-of-Oz methodology, multiple mapping and word spotting techniques, the speech driven ATM accommodates bilingual users of Bahasa Melayu and English. The second experiment evaluates the usability of a hybrid speech ATM, comparing it with a simulated manual ATM. The aim is to investigate how natural and fun can talking to a speech ATM be for these first-time users. Subjects performed the withdrawal and balance enquiry tasks. The ANOVA was performed on the usability and affective data. The results showed significant differences between systems in the ability to complete the tasks as well as in transaction errors. Performance was measured on the time taken by subjects to complete the task and the number of speech recognition errors that occurred. On the basis of user emotions, it can be said that the hybrid speech system enabled pleasurable interaction. Despite the limitations of speech recognition technology, users are set to talk to the ATM when it becomes available for public use.

Matched MeSH terms: Analysis of Variance
Fulltext A comparative study of aerobic capacity – VO2 max between common ethnic populations of Sabah, Malaysia

Nagesh Chodankar N., Vinoth Kumar, Urban John Arnold D’Souza, Ahmad Faris Abdullah

Malaysian Journal of Medicine and Health Sciences, 2019;15(106):47-47.
MyJurnal

Introduction: Aerobic power reflects the physical fitness of the individual. Evidences support differences in phys-iological responses to exercise. There is less data on VO2 max among common ethnic population of Sabah. Ob-jective of this study was to investigate VO2 max among Kadazan, Dusun, Brunei Melayu, Bugis, Murut and others of Sabah in male and female young adult population. Methods: A total of 385 participants were randomly selected. Monark 894 E leg bicycle ergo meter was used to measure aerobic power VO2 max. Based on the heart rate male and female respectively 450 & 300 kilogram-force meter/minute was chosen. Based on Astrand rhyming nomogram (age correction factor included-VO2 Max multiplied by 1.05) calculations Vo2Max was calculated in l/min. The age correction done VO2 Max (l/min) was multiplied by 1000 and later divided by the body weight to derive the actual VO2Max in ml/kg/min. The recovery heart rate after 1 minute was taken and the difference were calculated for the further analysis. Data was tabulated and analysed by one way ANOVA test - Hocherberg’s GT2. Results: There was no significant difference in VO2 max between the common ethnic young adult population both in males and fe-males. Conclusion: There is no significant difference in VO2 max among the common ethnic adult but have a similar aerobic capacity in the study group.

Matched MeSH terms: Analysis of Variance
Fulltext Factors associated with strain among informal care providers of patients with traumatic brain injury in Malaysia

Bamatraf AA, AlAmodi AA, Ali MA, Chan CM, Mazlan M, Shareef MA

J Family Med Prim Care, 2020 Jun;9(6):2990-2994.
PMID: 32984161 DOI: 10.4103/jfmpc.jfmpc_247_20

Purpose: This study aims to investigate the level of strain and various influencing factors among informal care providers of traumatic brain injury (TBI) patients.
Methods: A cross-sectional study was conducted in a single center in Malaysia via recruiting care providers of patients with TBI. The modified caregiver strain index (MCSI) questionnaires were utilized to ascertain the level of strain. The demographic data of informal care providers were also obtained. Independent sample t-test, analysis of variance (ANOVA), and a linear regression model were processed for data analysis.
Results: A total of 140 informal care providers were included in the study. More than half of informal care providers claimed to have strain (54.3%). Factors associated with increased strain include receiving tertiary education, being of Chinese background, and employed experience higher strain level. Informal care providers with characteristics such as being single, retired and provided care for 5 years experienced a lower level of strain.
Conclusion: Guidance on integrating the TBI knowledge into practice, assessing the care provider's level of strain regularly and providing supportive measures may aid in supporting informal care providers at risk.

Matched MeSH terms: Analysis of Variance
Fulltext Treatment Of Waste Engine Oil Using Optimized Acid/Clay Refining Method

Fathin Nadhirah Binti Kamal Ariffin, Yusilawati Ahmad Nor, Sarina Sulaiman, Nur Ayuni Jamal

Biological and Natural Resources Engineering Journal, 2019;2(2):37-48.
MyJurnal

This paper addresses the treatment of waste engine oils (WEO) by acid/clay refining method using glacial acetic acid. An optimization of the process parameters in terms of settling time, stirring speed and mixing temperature for treating the WEO was performed using Response Surface Methodology to improve the quality of treated lubricating oil. The quality of the treated WEO (Castrol brand) was evaluated in terms of viscosity index and flash point value. The treated fuel quality is found to have about 95% similarity to the fresh oil used as a standard at the settling time of 24 hours, temperature of 50 °C and mixing speed of 150 rpm. Analysis of variances (ANOVA) showed that settling time plays the most significant parameters of the process followed by the mixing temperature. Solid contaminants which were collected after the treatment were analyzed using SEM-EDS. They contained rough heteregenous shaped particles with elements such as carbon (97%), calcium (1.12%), zinc (0.74%), sulphur (0.73%) and phosphorus (0.29%). Then, four different brands of WEO (Liqui Moly, Castrol, Shell and Pennzoil) were treated at the optimized conditions to determine the feasibility of the method to treat any brands of WEO. It can be concluded that the optimized treatement method is suitable to treat most of WEO. The findings of this study provide the information on the best process condition for treating WEO as well as the solid contaminants present in it.

Matched MeSH terms: Analysis of Variance

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links