MyMedR

Displaying publications 141 - 160 of 2886 in total

Abstract:

Sort:

Fulltext Numerical analysis of thermal conductive hybrid nanofluid flow over the surface of a wavy spinning disk

Ahmadian A, Bilal M, Khan MA, Asjad MI

Sci Rep, 2020 Nov 02;10(1):18776.
PMID: 33139760 DOI: 10.1038/s41598-020-75905-w

A three dimensional (3D) numerical solution of unsteady, Ag-MgO hybrid nanoliquid flow with heat and mass transmission caused by upward/downward moving of wavy spinning disk has been scrutinized. The magnetic field has been also considered. The hybrid nanoliquid has been synthesized in the presence of Ag-MgO nanoparticles. The purpose of the study is to improve the rate of thermal energy transmission for several industrial purposes. The wavy rotating surface increases the heat transmission rate up to 15%, comparatively to the flat surface. The subsequent arrangement of modeled equations is diminished into dimensionless differential equation. The obtained system of equations is further analytically expounded via Homotopy analysis method HAM and the numerical Parametric continuation method (PCM) method has been used for the comparison of the outcomes. The results are graphically presented and discussed. It has been presumed that the geometry of spinning disk positively affects the velocity and thermal energy transmission. The addition of hybrid nanoparticles (silver and magnesium-oxide) significantly improved thermal property of carrier fluid. It uses is more efficacious to overcome low energy transmission. Such as, it provides improvement in thermal performance of carrier fluid, which play important role in power generation, hyperthermia, micro fabrication, air conditioning and metallurgical field.

Matched MeSH terms: Hot Temperature
Chronic Cold-Water-Induced Hypothermia Impairs Memory Retrieval and Nepeta menthoides as a Traditional "Hot" Herb Reverses the Impairment

Ahmadian-Attar MM, Ahmadiani A, Kamalinejad M, Dargahi L, Mosaddegh M

Iran J Pharm Res, 2014;13(Suppl):185-93.
PMID: 24711845

Iranian Traditional Medicine (ITM) describes a kind of dementia with similar signs and symptoms of Alzheimer's disease (AD). It explains the pathology of dementia with cold intemperament of the brain, which means that the brain is colder than its healthy form. ITM strategy for treatment of dementia is to heat the brain up by medical "hot" herbs. Nepeta menthoides (NM) is one of these "hot" herbs. To evaluate the veracity of ITM concept about dementia and its treatment, we first try to examine if coldness of brain can make memory impairment. If so, can NM reverse memory impairment? Rats in cold-water-induced hypothermic (CWH) groups were immersed up to the neck in 3.5 °C water, for 5 min during 14 consecutive days. As a control, rats were forced to swim in warm water at the same conditions. To eliminate the impact of forced swimming stress, a group of intact rats was also added. After last swimming in day 14, some groups received drug (100 or 500 mg/ Kg aqueous extract of NM) or vehicle via i.p. injection. Learning and memory were assessed by Morris water maze, and tau hyperphosphorylation was measured by western blotting. The results showed that CWH impairs learning and memory and induces tau hyperphosphorylation. 100 mg/Kg of NM reversed memory impairment as well as tau hyperphosphorylation. ITM theory about the relationship between brain hypothermia and dementia is in accordance with our findings.

Matched MeSH terms: Hot Temperature
Valorization of underutilized waste biomass from invasive species to produce biochar for energy and other value-added applications

Ahmed A, Abu Bakar MS, Hamdani R, Park YK, Lam SS, Sukri RS, et al.

Environ Res, 2020 07;186:109596.
PMID: 32361527 DOI: 10.1016/j.envres.2020.109596

Biochar production from invasive species biomass discarded as waste was studied in a fixed bed reactor pyrolysis system under different temperature conditions for value-added applications. Prior to pyrolysis, the biomass feedstock was characterized by proximate, ultimate, and heating value analyses, while the biomass decomposition behavior was examined by thermogravimetric analysis. The heating values of the feedstock biomass ranged from 18.65 to 20.65 MJ/kg, whereas the volatile matter, fixed carbon, and ash content were 61.54-72.04 wt %, 19.27-26.61 wt % and 1.51-1.86 wt %, respectively. The elemental composition of carbon, hydrogen, and oxygen in the samples was reported to be in the range of 47.41-48.47 wt %, 5.50-5.88 wt % and 46.10-45.18 wt %, respectively, while the nitrogen and sulphur content in the biomass samples were at very low concentrations, making it more useful for valorization from environmental aspects. The biochar yields were reported in the range of 45.36-58.35 wt %, 28.63-44.38 wt % and 22.68-29.42 wt % at a pyrolysis temperature of 400 °C, 500 °C, and 600 °C, respectively. The biochars were characterized from ultimate analysis, heating value, energy densification ratio, energy yield, pH, Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy and energy dispersive X-ray spectrometry (SEM and EDX), to evaluate their potential for value-added applications. The carbon content, heating value, energy densification ratio, and the porosity of the biochars improved with the increase in pyrolysis temperature, while the energy yield, hydrogen, oxygen, and nitrogen content of the biochars decreased. This study revealed the potential of the valorization of underutilized discarded biomass of invasive species via a pyrolysis process to produce biochar for value-added applications.

Matched MeSH terms: Temperature
Fulltext Production of gymnemic acid depends on medium, explants, PGRs, color lights, temperature, photoperiod, and sucrose sources in batch culture of Gymnema sylvestre

Ahmed AB, Rao AS, Rao MV, Taha RM

ScientificWorldJournal, 2012;2012:897867.
PMID: 22629221 DOI: 10.1100/2012/897867

Gymnema sylvestre (R.Br.) is an important diabetic medicinal plant which yields pharmaceutically active compounds called gymnemic acid (GA). The present study describes callus induction and the subsequent batch culture optimization and GA quantification determined by linearity, precision, accuracy, and recovery. Best callus induction of GA was noticed in MS medium combined with 2,4-D (1.5 mg/L) and KN (0.5 mg/L). Evaluation and isolation of GA from the calluses derived from different plant parts, namely, leaf, stem and petioles have been done in the present case for the first time. Factors such as light, temperature, sucrose, and photoperiod were studied to observe their effect on GA production. Temperature conditions completely inhibited GA production. Out of the different sucrose concentrations tested, the highest yield (35.4 mg/g d.w) was found at 5% sucrose followed by 12 h photoperiod (26.86 mg/g d.w). Maximum GA production (58.28 mg/g d.w) was observed in blue light. The results showed that physical and chemical factors greatly influence the production of GA in callus cultures of G. sylvestre. The factors optimized for in vitro production of GA during the present study can successfully be employed for their large-scale production in bioreactors.

Matched MeSH terms: Temperature
Fulltext Quantification of anti-fertility compound-diosgenin concentration in the fenugreek seeds aqueous extract (FSA)

Ahmed Kaid, N. A., Norbaiyah, M. B., Imad, M. A., Norazian, M. H.

International Medical Journal Malaysia, 2016;15(1):75-80.
MyJurnal

Introduction: This study aims to build a standardization method for preparation of effective powder from
FSA and to quantify diosgenin in FSA. Methodology: One kg of FS were used in this study. Setting: BMS, KOM
and KOP, IIUM Kuantan campus. FS were washed with distilled water to exclude any foreign matter, and
were then air dried. FS-powder were put in distilled water in a ratio of 1 g of powder in 20 ml of distilled
water and were shaken at room temperature for 24 hours. Ten mg of hydrolyzed extract sample was diluted
in 10 ml volumetric flask with methanol for 15 minutes. Chromatographic estimation was performed using
an equilibrated reverse phase Eclipse XDB-C18 column (particle size 5 µg, 4.6 mm x 150 mm). Results: One
gram of FSA extract was hydrolyzed to produce sapogenins and 46.6% was recovered. A calibration curve
that was constructed based on five dilutions of diosgenin standard at concentrations of 2, 5, 10, 20, 30 and
50 ppm produced a linear graft (r = 0.999). The concentration of diosgenin in FSA extract as calculated using
the regression analysis was found to be 29.66 µg/ml, 13.81 % w/w on dried weight basis. Conclusion:
Preparation and standardization of effective powder from FSA are the corner stone of many scientific
researches in IIUM and Malaysia. Diosgenin is available in the FSA in adequate concentration. The adequate
amount of diosgenin in the FSA will guide us to do further study in the way of preparation of a natural
product that can be used in the field of reversible anti-fertility therapy.

Matched MeSH terms: Temperature
A study to examine the ageing behaviour of cold plasma-treated agricultural seeds

Ahmed N, Siow KS, Wee MFMR, Patra A

Sci Rep, 2023 Jan 30;13(1):1675.
PMID: 36717647 DOI: 10.1038/s41598-023-28811-w

Cold plasma (low pressure) technology has been effectively used to boost the germination and growth of various crops in recent decades. The durability of these plasma-treated seeds is essential because of the need to store and distribute the seeds at different locations. However, these ageing effects are often not ascertained and reported because germination and related tests are carried out within a short time after the plasma-treatment. This research aims to fill that knowledge gap by subjecting three different types of seeds (and precursors): Bambara groundnuts (water), chilli (oxygen), and papaya (oxygen) to cold plasma-treatment. Common mechanisms found for these diverse seed types and treatment conditions were the physical and chemical changes induced by the physical etching and the cold plasma on the seeds and subsequent oxidation, which promoted germination and growth. The high glass transition temperature of the lignin-cellulose prevented any physical restructuring of the surfaces while maintaining the chemical changes to continue to promote the seeds germination and growth. These changes were monitored over 60 days of ageing using water contact angle (WCA), water uptake, electrical conductivity, field emission scanning electron microscopy (FE-SEM) and X-ray photoelectron spectroscopy (XPS). The vacuum effect was also investigated to separate its effect from cold plasma (low pressure). This finding offers a framework for determining how long agricultural seeds that have received plasma treatment can be used. Additionally, there is a need to transfer this research from the lab to the field. Once the impact of plasma treatment on seeds has been estimated, it will be simple to do so.

Matched MeSH terms: Cold Temperature
Fulltext Statistical optimization for dye removal from aqueous solution by cross-linked chitosan composite

Ahmed Saud Abdulhameed, Ali H. Jawad, Abdul Karim-Talaq Mohammad

Science Letters, 2020;14(2):1-14.
MyJurnal

Response surface methodology-Box–Behnken design (RSM-BBD) was employed to optimize the methyl orange (MO) dye removal efficiency from aqueous solution by cross-linked chitosan-tripolyphosphate/nano-titania compsite (Chi-TPP/NTC). The influence of pertinent parameters, i.e. A: TiO2 loading (0- 50 %), B: dose (0.04-0.14 g), C: pH (4-10), and D: temperature (30-50 oC) on the MO removal efficiency were tested and optimized using RSM-BBD. The F-values of BBD model for MO removal efficiency was 93.4 (corresponding p-value < 0.0001). The results illustrated that the highest MO removal efficiency (87.27 %) was observed at the following conditions: TiO2 loading (50% TiO2), dose (0.09 g), pH = 4.0, and temperature of 40 oC.

Matched MeSH terms: Temperature
Fulltext Investigating the use of date seed for removal of boron from seawater

Ahmed, Moussa Mohamed, Nik Rashida Nik Abdul Ghani, Jami, Mohammed Saedi, Mirghani, Mohamed Elwathig Saeed, Md. Noor Salleh

Biological and Natural Resources Engineering Journal, 2020;3(2):55-73.
MyJurnal

Boron has been classified as a drinking water pollutant in many countries. It is harmful to many plants, exceptionally sensible plants, and human health. Therefore, boron level needs to be decreased to 0.3 mg/L for drinking water and within 0.5 mg/L to 1 mg/L for irrigation water. In this study, various operational parameters namely pH, contact time and liquid/solid ratio were investigated to determine the potential of using date seed (or date pit or date stone) to remove boron from seawater. This study's main objective was to determine boron adsorption capacities of date seeds prepared by various methods (i.e., powdered, activated, acid-treated and defatted seed) by batch adsorption process using boron contaminated synthetic seawater. The process parameters of the selected biosorbent among the four date seed preparations methods were optimized. The surface characteristics were analyzed by using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM). The results showed that acid-treated date seed was the best biosorbent in terms of removing 89.18% boron from aqueous solution at neutral pH, liquid to solid ratio of 5 within 2 hours of reaction time at room temperature (25°C±2°C).

Matched MeSH terms: Temperature
Fulltext The employment of q-PCR using specific primer targeting on mitochondrial cytochrome-b gene for identification of wild boar meat in meatball samples

Aina GQ, Erwanto Y, Hossain M, Johan MR, Ali ME, Rohman A

J Adv Vet Anim Res, 2019 Sep;6(3):300-307.
PMID: 31583226 DOI: 10.5455/javar.2019.f348

Objective: The objective of this study was to employ real-time or quantitative polymerase chain reaction (q-PCR) using novel species specific primer (SSP) targeting on mitochondrial cytochrome-b of wild boar species (CYTBWB2-wb) gene for the identification of non-halal meat of wild boar meat (WBM) in meatball products.
Materials and Methods: The novel SSP of CYTBWB2-wb was designed by our group using PRIMERQUEST and NCBI software. DNA was extracted using propanol-chloroform-isoamyl alcohol method. The designed SSP was further subjected for validation protocols using DNA isolated from fresh meat and from meatball, which include specificity test, determination of efficiency, limit of detection and repeatability, and application of developed method for analysis of commercially meatball samples.
Results: The results showed that CYTBWB2-wb was specific to wild boar species against other animal species with optimized annealing temperature of 59°C. The efficiency of q-PCR obtained was 91.9% which is acceptable according to the Codex Allimentarius Commission (2010). DNA, with as low as 5 pg/μl, could be detected using q-PCR with primer of CYTBWB2-wb. The developed method was also used for DNA analysis extracted from meatball samples commercially available.
Conclusion: q-PCR using CYTBWB2-wb primers targeting on mitochondrial cytochrome-b gene (forward: CGG TTC CCT CTT AGG CAT TT; Reverse: GGA TGA ACA GGC AGA TGA AGA) can be fruitfully used for the analysis of WBM in commercial meatball samples.

Matched MeSH terms: Temperature
Enhancing biodegradation of crude oil in soil using fertilizer and empty fruit bunch of oil palm

Ainon Hamzah, Siti Nursyazana Md Salleh, Sukiman Sarmani

Sains Malaysiana, 2014;43:1327-1332.

Bioremediation of crude oil using biostimulation and/or bioaugmentation was done by simulation study in the green house under uncontrolled environment temperature. In this study, the soil with indigenous microbes was spiked with Tapis crude oil at 200 g/kg. The microbial density of the amended soils was augmented by addition of fresh inoculum of microbial consortium which consist of Pseudomonas aeruginosa UKMP-14T, Acinetobacter baumannii UKMP-12T and seed culture two strains of fungi, Trichoderma virens UKMP-1M and Trichoderma virens UKMP-2M at ratio 1:1:1:1 (v/w). The amendment soil was added with 20% (v/w) of standardize consortium inoculum, 20% (w/w) of dried empty fruit bunch (EFB) and the effect of EFB was compared with 0.7% commercial fertilizer (v/w) which contain NPK (8:8:1). Soil with indigenous microbes was used as a control. Results showed total petroleum hydrocarbon (TPH) degradation for treatment added with NPK fertilizer was 70.36%, addition with EFB bulking agent 68.86% and addition of both NPK and EFB was 100% at day 30 of incubation. The control plot, 62% of TPH degradation was achieved after 30 days incubation.

Matched MeSH terms: Temperature
Effect of different drying techniques on the nutritional values of oyster mushroom (pleurotus sajor-caju)

Aishah M, Wan Rosli W

Sains Malaysiana, 2013;42:937-941.

Mushrooms are basically fungi, which have fleshy and spore-bearing fruiting body. This family of fungi literally has thousands of varieties of mushroom throughout the world. Oyster mushrooms are uniquely distinctive and they do look like oysters. Drying these mushroom confer a stabilizing property to it and then can be stored for a longer period. The nutritional values of the dried oyster mushroom with different drying techniques were thus determined. There were three different drying techniques used. These include low heat air blow (LHAB, AnjaadTM), sun drying (SD) and gas laboratory oven (LO) drying. All three samples were analyzed for beta-glucan content, water activity, colour, proximate analysis and dietary fibre concentration. The result showrd that LHAB method confers the lowest water activity compared with the other two drying methods. It also has the lowest colour measurement for brightness. Mushroom samples dried by LHAB techniques contain the highest concentration of both fat and carbohydrate compared with the other two methods. Besides, SD method confers the highest beta-glucan content. On the other hand, dietary fibres observed in LO dried samples contain the highest fibre content among the three drying treatments. In conclusion, LHAB method is recommended in reducing water activity and increasing proximate contents while both SD and LO are good in preserving beta-glucan and dietary fibre contents, respectively.

Matched MeSH terms: Hot Temperature
Fulltext The effect of DMEM and DMEM:F12 culture media on the growth of SH-SY5Y cells

Aishah Mohammed Izham, Min, Jasmine Chia Siew, Vidyadaran, Sharmili, Mohd Roslan Sulaiman, Hemabarathy, Bharatham B., Perimal, Enoch Kumar

Life Sciences, Medicine and Biomedicine, 2018;2(3):6-0.
MyJurnal

The human neuroblastoma cell line, SH-SY5Y cells, derived from the parental SK-N-SH cell line, is commonly used as an in vitro model for neuroscience and neurobiology research. Since SH-SY5Y cells are widely cultured for research, several different culture media have been used to optimize the growth of the cells, including Eagle's Minimum Essential Medium (EMEM), Dulbecco’s modified Eagle’s medium (DMEM) and other recently developed culture media. SH-SY5Y cells has the ability to reach confluency in culture flasks ranges from 5 days to 15 days, depending on the culture media used. Hence, the optimization of the culture media is crucial to achieve the fastest growth rate for the cells. The objective of the study is to evaluate the culture media for the proliferation of SH-SY5Y cells. We compared the growth rate of SH-SY5Y cells cultured in Dulbecco’s modified Eagle’s medium (DMEM) supplemented with 15% heat-inactivated fetal bovine serum (hiFBS), Dulbecco’s modified Eagle’s medium: Nutrient mixture F-12 (DMEM:F12) + supplemented with 15% hiFBS and DMEM:F12 supplemented with 10% hiFBS. In DMEM:F12 supplemented with 15% hiFBS, cells grew up to 6.67E+05 cells. In DMEM:F12 supplemented with 10% hiFBS, cells grew up to 5.28E+05 cells. In DMEM supplemented with 15% hiFBS, the cells grew up to 4.76E+05 cells. There was a significant difference between culture media DMEM:F12 supplemented with 15% hiFBS as compared to DMEM:F12 supplemented with 10%hiFBS and DMEM supplemented with 15% hiFBS (p0.05). We found that DMEM:F12 supplemented with 15% hiFBS could serve as an optimized culture media for high proliferation rate of SH-SY5Y cells.

Matched MeSH terms: Hot Temperature
Fulltext Stability of selected quality attributes of pink guava juice during storage at elevated temperatures

Aishah, B., Hannah, K., Zati Alyani, O.

International Food Research Journal, 2016;23(5):1918-1925.
MyJurnal

Quality degradation is normally judge by monitoring independently the loss of a certain quality
attribute during storage. However, the rate of degradation for each of the quality attributes
present in a food product is not the same. This study focus on deterioration of vitamin C,
lycopene, total phenolics and antioxidant activity of ready-to-drink pink guava juice (PGJ)
during storage at elevated temperatures. Kinetic order, rate constant (k), activation energy
(Ea) and temperature coefficient (Q10) of the degradation were derived by applying Arrhenius
equation. The results obtained showed that freshly made PGJ contain 39.79±2.18 mg/100 mL
of vitamin C, 3.17±0.27 mg/L of lycopene, 28.08±4.11 mgGAE/100 mL of total phenolic
content (TPC) and 13.20±1.91 mMTE/100 mL of ferric reducing antioxidant power (FRAP).
All quality attributes measured in this study showed zero-order kinetic reaction. The results
also showed that FRAP has the highest Ea of 49.52 KJ/mol and Q10 of 1.80, followed by
vitamin C (Ea=41.49 KJ/mol; Q10=1.64), lycopene (Ea=31.75 KJ/mol; Q10=1.46), and lastly
TPC (Ea=14.11 KJ/mol; Q10=1.18). The predicted total depletion of each quality attribute
at refrigerated storage (5o
C) were 266 days for antioxidant activity, 158 days for vitamin C
and lycopene, and 63 days for total phenolics. This study provide useful information on the
degradation rate and availability of health beneficial and bioactive compounds present in fruit
juice beverage during storage.

Matched MeSH terms: Temperature
Fulltext Highly thermostable extracellular lipase-producing Bacillus strain isolated from a Malaysian hotspring and identified using 16S rRNA gene sequencing

Akanbi, T.O., Kamaruzaman, A.L., Abu Bakar, F., Sheikh Abdul Hamid, N., Radu, S., Abdul Manap, M.Y., et al.

International Food Research Journal, 2010;17(1):45-53.
MyJurnal

The activities of lipase produced by five lipases-producing thermophilic bacteria strains (SY1, SY5, SY6, SY7 and SY9) isolated from Selayang Hot Spring in the western part of Peninsular Malaysia were analyzed and compared. SY7 and SY9 had considerably higher lipolytic activities than those of SY1, SY5 and SY6. Thermostabilities of lipase produced by all strains were determined after heating at 80°C for 30 minutes. Strain SY7 retained the highest lipolytic activity of 77%, while others had infinitesimally low thermostability (retaining less than 34% of their original activity) at the same temperature and time. SY7 was chosen for further characterization because it showed exceptionally high lipase activity and thermostability. It was identified as belonging to Bacillus species by the conventional Gram-staining technique, Biochemical tests and Biolog Microstation system. By using 16S rRNA gene sequencing, strain SY7 generated the same expected PCR product with molecular weight of 1500 base pair. It displayed 98% sequence similarity to Bacillus cereus strain J-1 16S rRNA gene partial sequence with accession number: AY305275 and has been deposited in the database of Genbank.

Matched MeSH terms: Temperature
Fulltext Functional and pasting properties of a tropical breadfruit (Artocarpus altilis) starch from Ile-Ife, Osun State, Nigeria

Akanbi, T.O., Nazamid, S., Adebowale, A.A.

International Food Research Journal, 2009;16(2):151-157.
MyJurnal

This study was carried out to determine the proximate, functional and pasting properties of breadfruit starch. Breadfruit starch was isolated from matured breadfruit (Artocarpus altilis) and was analyzed for its fuctional, proximate and pasting properties. The starch contains 10.83%, 0.53%, 0.39%, 22.52%, 77.48% and 1.77% moisture, crude protein, fat, amylose, amylopectin and ash contents respectively. The average particle size, pH, bulk density and dispersibility of the breadfruit starch were 18 μm, 6.5, 0.673 g/mls, and 40.67% respectively. The swelling power of the breadfruit starch increases with increase in temperature, but there was a rapid increase in the swelling power from 70 to 80 0C. The pasting temperature of the starch paste was 84.05 0C, setback and breakdown values were 40.08 and 7.92 RVU respectively. The peak viscosity value was 121.25 RVU while final viscosity value was 153.42 RVU. This study concluded that breadfruit starch has an array of functional, pasting and proximate properties that can facilitate its use in so many areas where the properties of other starches are acceptable.

Matched MeSH terms: Temperature
Fulltext Gut Bacteria of Rattus rattus (Rat) Produce Broad-Spectrum Antibacterial Lipopeptides

Akbar N, Siddiqui R, Iqbal M, Sagathevan K, Kim KS, Habib F, et al.

ACS Omega, 2021 May 11;6(18):12261-12273.
PMID: 34056379 DOI: 10.1021/acsomega.1c01137

Among several animals, Rattus rattus (rat) lives in polluted environments and feeds on organic waste/small invertebrates, suggesting the presence of inherent mechanisms to thwart infections. In this study, we isolated gut bacteria of rats for their antibacterial activities. Using antibacterial assays, the findings showed that the conditioned media from selected bacteria exhibited bactericidal activities against Gram-negative (Escherichia coli K1, Klebsiella pneumoniae, Pseudomonas aeruginosa, Serratia marcescens, and Salmonella enterica) and Gram-positive (Bacillus cereus, methicillin-resistant Staphylococcus aureus, and Streptococcus pyogenes) pathogenic bacteria. The conditioned media retained their antibacterial properties upon heat treatment at boiling temperature for 10 min. Using MTT assays, the conditioned media showed minimal cytotoxic effects against human keratinocyte cells. Active conditioned media were subjected to tandem mass spectrometry, and the results showed that conditioned media from Bacillus subtilis produced a large repertoire of surfactin and iturin A (lipopeptides) molecules. To our knowledge, this is the first report of isolation of lipopeptides from bacteria isolated from the rat gut. In short, these findings are important and provide a platform to develop effective antibacterial drugs.

Matched MeSH terms: Hot Temperature; Temperature
Natural Convection from the Outside Surface of an Inclined Cylinder in Pure Liquids at Low Flux

Akbari A, Mohammadian E, Alavi Fazel SA, Shanbedi M, Bahreini M, Heidari M, et al.

ACS Omega, 2019 Apr 30;4(4):7038-7046.
PMID: 31459815 DOI: 10.1021/acsomega.9b00176

Many studies have investigated natural convection heat transfer from the outside surface of horizontal and vertical cylinders in both constant heat flux and temperature conditions. However, there are poor studies in natural convection from inclined cylinders. In this study, free convection heat transfer was examined experimentally from the outside surface of a cylinder for glycerol and water at various heat fluxes. The tests were performed at 10 different inclination angles of the cylinder, namely, φ = 0°, 10°, 20°, 30°, 40°, 50°, 60°, 70°, 80°, and 90°, measured from the horizon. Our results indicated that the average Nusselt number reduces with the growth in the inclination of the cylinder to the horizon at the same heat flux, and the average Nusselt number enhanced with the growth in heat flux at the same angle. Also, the average Nusselt number of water is greater than that of glycerol. A new experimental model for predicting the average Nusselt number is suggested, which has a satisfactory accuracy for experimental data.

Matched MeSH terms: Hot Temperature; Temperature
Comparison between Nucleate Pool Boiling Heat Transfer of Graphene Nanoplatelet- and Carbon Nanotube- Based Aqueous Nanofluids

Akbari A, Mohammadian E, Alavi Fazel SA, Shanbedi M, Bahreini M, Heidari M, et al.

ACS Omega, 2019 Nov 19;4(21):19183-19192.
PMID: 31763542 DOI: 10.1021/acsomega.9b02474

An increase of nucleate pool boiling with the use of different fluid properties has received much attention. In particular, the presence of nanostructures in fluids to enhance boiling was given special consideration. This study compares the effects of graphene nanoplatelet (GNP), functionalized GNP with polyethylene glycol (PEG), and multiwalled carbon nanotube (CNT) nanofluids on the pool boiling heat transfer coefficient and the critical heat flux (CHF). Our findings showed that at the same concentration, CHF for functionalized GNP with PEG (GNP-PEG)/deionized water (DW) nanofluids was higher in comparison with GNP- and CNT-based nanofluids. The CHF of the GNP/DW nanofluids was also higher than that of CNT/DW nanofluids. The CHF of GNP-PEG was 72% greater than that of DW at the concentration of 0.1 wt %. There is good agreement between measured critical heat fluxes and the Kandlikar correlation. In addition, the current results proved that the GNP-PEG/DW nanofluids are highly stable over 3 months at a concentration of 0.1 wt %.

Matched MeSH terms: Hot Temperature
Fulltext Analytical calculation of sensing parameters on carbon nanotube based gas sensors

Akbari E, Buntat Z, Ahmad MH, Enzevaee A, Yousof R, Iqbal SM, et al.

Sensors (Basel), 2014;14(3):5502-15.
PMID: 24658617 DOI: 10.3390/s140305502

Carbon Nanotubes (CNTs) are generally nano-scale tubes comprising a network of carbon atoms in a cylindrical setting that compared with silicon counterparts present outstanding characteristics such as high mechanical strength, high sensing capability and large surface-to-volume ratio. These characteristics, in addition to the fact that CNTs experience changes in their electrical conductance when exposed to different gases, make them appropriate candidates for use in sensing/measuring applications such as gas detection devices. In this research, a model for a Field Effect Transistor (FET)-based structure has been developed as a platform for a gas detection sensor in which the CNT conductance change resulting from the chemical reaction between NH3 and CNT has been employed to model the sensing mechanism with proposed sensing parameters. The research implements the same FET-based structure as in the work of Peng et al. on nanotube-based NH3 gas detection. With respect to this conductance change, the I-V characteristic of the CNT is investigated. Finally, a comparative study shows satisfactory agreement between the proposed model and the experimental data from the mentioned research.

Matched MeSH terms: Temperature
Fulltext A New Empirical Model for Viscosity of Sulfonated Polyacrylamide Polymers

Akbari S, Mahmood SM, Ghaedi H, Al-Hajri S

Polymers (Basel), 2019 Jun 14;11(6).
PMID: 31207965 DOI: 10.3390/polym11061046

Copolymers of acrylamide with the sodium salt of 2-acrylamido-2-methylpropane sulfonic acid-known as sulfonated polyacrylamide polymers-had been shown to produce very promising results in the enhancement of oil recovery, particularly in polymer flooding. The aim of this work is to develop an empirical model through the use of a design of experiments (DOE) approach for bulk viscosity of these copolymers as a function of polymer characteristics (i.e., sulfonation degree and molecular weight), oil reservoir conditions (i.e., temperature, formation brine salinity and hardness) and field operational variables (i.e., polymer concentration, shear rate and aging time). The data required for the non-linear regression analysis were generated from 120 planned experimental runs, which had used the Box-Behnken construct from the typical Response Surface Methodology (RSM) design. The data were collected during rheological experiments and the model that was constructed had been proven to be acceptable with the Adjusted R-Squared value of 0.9624. Apart from showing the polymer concentration as being the most important factor in the determination of polymer solution viscosity, the evaluation of the model terms as well as the Sobol sensitivity analysis had also shown a considerable interaction between the process parameters. As such, the proposed viscosity model can be suitably applied to the optimization of the polymer solution properties for the polymer flooding process and the prediction of the rheological data required for polymer flood simulators.

Matched MeSH terms: Temperature

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links