Displaying all 18 publications

Abstract:
Sort:
  1. Husniyah Aliyah, L., Anuar, H.
    Movement Health & Exercise, 2014;3(1):49-56.
    MyJurnal
    This study focuses on the mechanical effect of different composition of polymer blend. Polymer blend of high density polyethylene (HDPE) and ethylene propylene rubber (EPR) were selected and varied by three different compositions which are 70:30, 50:50 and 30:70. HDPE-EPR blend is believed to be the best material for sole shoe. In which, HDPE has good flexibility while, EPR can maintain optimum performance at high and low temperature as well as provide better gripping characteristic that suits for insole and outsole sport shoe. On the other hand, the time efficiency of electron beam radiation on these polymer blends helps in improving the croslinking of HDPE-EPR blend. The aim of this paper was to find the optimum composition of electron beam irradiated polymer blends for sole shoes especially in sports application. These irradiated polymer blends were produced by melt blending, underwent compression moulding and then were irradiated by electron beam at 100 kGy/s. Mechanical test of tensile and hardness test were investigated and the morphology of the failure fracture was analysed by field emission scanning electron microscopy (FESEM). The polymer blend with 70% of HDPE and 30% of EPR showed the optimum result of tensile strength, tensile modulus and hardness as well as ductile failure image.
  2. Zuraida, A., Yusliza, Y., Anuar, H., Mohd Khairul Muhaimin, R.
    MyJurnal
    Starch is a biodegradable polymer produced in abundance from many renewable resources. This study examined the influence of citric acid (0-40% w/wt%) ) and water (0-40% w/wt%) as secondary additive and glycerol as plasticizer on the mechanical properties of bio-plastic starch (BPS) from Malaysian sago. The CA content varies from 0 to 40 w/wt% while water was also varied from 0 to 40 w/wt%. FT-IR spectroscopy showed that acid citric improve the properties of BPS and water give negative effects to the carbon hydrogenbond. It is obvious that the addition of the CA at 30 wt/wt% improve the mechanical property of BPS to more than 40% compare to the addition of water.
  3. Greer GJ, Anuar H
    PMID: 6523170
    Using ELISA and COPT diagnostic tests, serological evidence of Malaysian schistosomiasis was discovered among Orang Asli populations from three areas in Peninsular Malaysia. Serum samples collected in 1975 indicated an ELISA-positive prevalence of 25% and a COPT prevalence of 11% from Pos Iskandar, Pahang and an ELISA prevalence of 13% and a COPT of 4% from Bukit Lanjan, Selangor. Resurveys at these site in 1982-1984 showed a continued presence of serological positive individuals but prevalence rates were markedly lower: 7% and 1% for ELISA and 4% and 2% for COPT at Pos Iskandar and Bukit Lanjan respectively. Snail hosts were not found at either site. The source of infection for persons living in these lowland areas remains unknown. In a third area, Kuala Tahan, Pahang, located in the foothills of the central mountain range, foci of transmission have been found near to Orang Asli settlements. The serological prevalence rate among Negrito Orang Asli in that study area was 9% for ELISA and 4% for COPT. Thirty-three of 36 COPT-positive sera produced vacuolated bleb precipates and in 31 these were the only reactions seen. The high percentage of positives producing only these precipates suggests that among Orang Asli schistosomiasis patients such reactions are not an indication of recently acquired infection as has been reported for schistosomiasis patients in the Philippines.
  4. Hanjeet K, Lai PF, Anuar HM
    Med J Malaysia, 1996 Mar;51(1):129-30.
    PMID: 10967991
    A total of 1131 Police Field Force personnel were screened serologically for schistosomiasis in Malaysia. A total of 150 (13.3%) were tested positive or borderline. Stool samples from 75 of these cases were however all negative for schistosome eggs. This survey suggests that Police Field Force personnel may be agents for propagating the schistosome life cycle in Malaysia.
  5. Greer GJ, Dennis DT, Lai PF, Anuar H
    J Trop Med Hyg, 1989 Jun;92(3):203-8.
    PMID: 2738992
    A stable population at risk of Malaysian schistosomiasis was studied. Census results indicated that approximately one-fourth of the inhabitants used a stream where Schistosoma malayensis-infected snails were present as their principal source of water for bathing, drinking, and household tasks. The general population also contacted this stream when fording it or while fishing. Serological surveys using enzyme-linked immunosorbent assay (ELISA) and the circumoval precipitin (COP) test revealed six (9%) and three (4%) positives, respectively, among 67 persons examined. No schistosome ova were found in a general survey of 56 persons which included five ELISA positive and two COP test positive patients. ELISA and COP test prevalences among those dependent on the foci of transmission for water, 13 and 7% respectively, were only slightly higher than prevalences among the remainder of the population, 8 and 4% respectively. These results indicate that even among a stable population at risk of Malaysian schistosomiasis the prevalence is low. Our findings support the hypothesis that S. malayensis is a zoonotic infection in man and that it is unlikely to become a significant public health problem.
  6. Anuar H, Shah SA, Abdul Gafor AH, Mahmood MI
    BMC Nephrol, 2020 10 07;21(1):425.
    PMID: 33028217 DOI: 10.1186/s12882-020-02028-9
    BACKGROUND: Chronic kidney disease has become a major health problem around the world. It displays no symptoms until the later stages. Therefore, its early detection is crucial, and a suitable intervention is necessary to halt its development. The aim of this study was to develop and validate a recently formulated Chronic Kidney Disease Perception Scale (CKDPS) for diabetic patients based on Social Psychology, and their perceptions based on the Health Belief Model (HBM).

    METHODS: The newly developed CKDPS instrument was tested on 300 patients with diabetes mellitus in a cross-sectional study. The number of domains, model-fit index, construct validity, and internal consistency of this instrument were determined using exploratory (EFA) and confirmatory factor analysis (CFA).

    RESULTS: The EFA yielded nine domains: illness identity, timeline motivation, medical practice and co-operation for Social Psychology, and perceived benefit, perceived barriers, perceived susceptibility, perceived severity, and perceived cue to action for HBM. Four items with low factor loading were removed. CFA yielded the following fit indices for Social Psychology: the goodness of fit index (GFI) = 0.889, comparative fit index (CFI) = 0.934, root mean square error of approximation (RMSEA) = 0.053, normed chi-square (NC) = 1.831; and the following for HBM: GFI = 0.834, CFI = 0.957, RMSEA = 0.053, NC = 1.830. Values of Cronbach's α ranged between 0.760 and 0.909.

    CONCLUSIONS: The CKDPS includes 61 questions across nine domains, divided under two categories of Social Psychology and HBM. It is also a valid and reliable tool for measuring diabetic patients' perception of CKD prevention that can be used in larger studies.

  7. Brza MA, Aziz SB, Anuar H, Al Hazza MHF
    Int J Mol Sci, 2019 Aug 11;20(16).
    PMID: 31405255 DOI: 10.3390/ijms20163910
    The present work proposed a novel approach for transferring high-risk heavy metals tometal complexes via green chemistry remediation. The method of remediation of heavy metals developed in the present work is a great challenge for global environmental sciences and engineering because it is a totally environmentally friendly procedure in which black tea extract solution is used. The FTIR study indicates that black tea contains enough functional groups (OH and NH), polyphenols and conjugated double bonds. The synthesis of copper complex was confirmed by the UV-vis, XRD and FTIR spectroscopic studies. The XRD and FTIR analysis reveals the formation of complexation between Cu metal complexes and Poly (Vinyl Alcohol) (PVA) host matrix. The study of optical parameters indicates that PVA-based hybrids exhibit a small optical band gap, which is close to inorganic-based materials. It was noted that the absorption edge shifted to lower photon energy. When Cu metal complexes were added to PVA polymer, the refractive index was significantly tuned. The band gap shifts from 6.2 eV to 1.4 eV for PVA incorporated with 45 mL of Cu metal complexes. The nature of the electronic transition in hybrid materials was examined based on the Taucs model, while a close inspection of the optical dielectric loss was also performed in order to estimate the optical band gap. The obtained band gaps of the present work reveal that polymer hybrids with sufficient film-forming capability could be useful to overcome the drawbacks associated with conjugated polymers. Based on the XRD results and band gap values, the structure-property relationships were discussed in detail.
  8. Norris SA, Anuar H, Matzen P, Cheah JC, Jensen BB, Hanson M
    BMC Public Health, 2014;14 Suppl 2:S6.
    PMID: 25080995 DOI: 10.1186/1471-2458-14-S2-S6
    BACKGROUND: Malaysia faces burgeoning obesity and diabetes epidemics with a 250% and 88% increase respectively between 1996 and 2006. Identifying the health challenges of young adults in Malaysia, who constitute 27.5 % of the population, is critical for NCD prevention. The aim of the study was two-fold: (1) to achieve consensus amongst stakeholders on the most important challenge impacting the health of young adults, and (2) to engage with stakeholders to formulate a NCD prevention framework.

    METHODS: The Delphi Technique was utilised to achieve group consensus around the most important life and health challenges that young adults face in Malaysia. Subsequently, the results of the consensus component were shared with the stakeholders in an engagement workshop to obtain input on a NCD prevention framework.

    RESULTS: We found that life stress was a significant concern. It would seem that the apathy towards pursuing or maintaining a healthy lifestyle among young adults may be significantly influenced by the broader distal determinant of life stress. The high cost of living is suggested to be the main push factor for young working adults towards attaining better financial security to improve their livelihood. In turn, this leads to a more stressful lifestyle with less time to focus on healthier lifestyle choices.

    CONCLUSIONS: The findings highlight a pivotal barrier to healthier lifestyles. By assisting young adults to cope with daily living coupled with realistic opportunities to make healthier dietary choices, be more active, and less sedentary could assist in the development of NCD health promotion strategies.

  9. Jamal NA, Tan AW, Yusof F, Katsuyoshi K, Hisashi I, Singh S, et al.
    Materials (Basel), 2016 Mar 30;9(4).
    PMID: 28773377 DOI: 10.3390/ma9040254
    In recent years, closed-cell porous Aluminum (Al) has drawn increasing attention, particularly in the applications requiring reduced weight and energy absorption capability such as in the automotive and aerospace industries. In the present work, porous Al with closed-cell structure was successfully fabricated by powder metallurgy technique using PMMA as a space holder. The effects of the amount of PMMA powder on the porosity, density, microstructure and compressive behaviors of the porous specimens were systematically evaluated. The results showed that closed-cell porous Al having different porosities (12%-32%) and densities (1.6478 g/cm³, 1.5125 g/cm³ and 1.305 g/cm³) could be produced by varying the amount of PMMA (20-30 wt %). Meanwhile, the compressive behavior results demonstrated that the plateau stress decreased and the energy absorption capacity increased with increasing amount of PMMA. However, the maximum energy absorption capacity was achieved in the closed-cell porous Al with the addition of 25 wt % PMMA. Therefore, fabrication of closed-cell porous Al using 25 wt % PMMA is considered as the optimal condition in the present study since the resultant closed-cell porous Al possessed good combinations of porosity, density and plateau stress, as well as energy absorption capacity.
  10. Alli YA, Ejeromedoghene O, Oladipo A, Adewuyi S, Amolegbe SA, Anuar H, et al.
    ACS Appl Bio Mater, 2022 Nov 21;5(11):5240-5254.
    PMID: 36270024 DOI: 10.1021/acsabm.2c00670
    Quaternary Trimethyl Chitosan (QTMC) and QTMC-Silver Nanoparticles (QTMC-AgNPs) have been synthesized, characterized, and tested as antibacterial agents against Staphylococcus aureus, Escherichia coli, and two plant fungi (Sclerotium rolfsil and Fusarium oxysporum). The as-prepared water-soluble QTMC was in situ reacted with silver nitrate in the presence of clean compressed hydrogen gas (3 bar) as a reducing agent to produce QTMC-AgNPs. UV-vis, ATR-FTIR, HR-TEM/SEM, XPS, DLS, XRD, and TGA/DTG were employed to assess the optical response, morphology/size, surface chemistry, particle size distribution, crystal nature, and thermal stability of the synthesized QTMC-AgNPs, respectively. The as-prepared QTMC-AgNPs were quasi-spherical in shape with an average particle size of 12.5 nm, as determined by ImageJ software utilizing HR-TEM images and further validated by DLS analysis. The development of crystalline nanoparticles was confirmed by the presence of distinct and consistent lattice fringes with an approximate interplanar d-spacing of 2.04 nm in QTMC-AgNPs. The QTMC-AgNPs exhibited significant antibacterial activity with a clear zone of inhibition of 30 mm and 26 mm around the disks against E. coli and S. aureus, respectively. In addition, QTMC-AgNPs showed highly efficient antifungal activity with 100% and 76.67% growth inhibition against two plant pathogens, S. rolfsii and F. oxysporum, respectively, whereas QTMC revealed no impact. Overall, QTMC-AgNPs showed a promising therapeutic potential and,thus, can be considered for drug design rationale.
  11. Awale RJ, Ali FB, Azmi AS, Puad NIM, Anuar H, Hassan A
    Polymers (Basel), 2018 Sep 02;10(9).
    PMID: 30960902 DOI: 10.3390/polym10090977
    The brittleness of polylactic acid (PLA) has always limited its usage, although it has good mechanical strength. In this study, flexibility of PLA/starch (PSt) blend was enhanced using epoxidized palm oil (EPO) as the green plasticizer. The PLA/starch/EPO (PSE) blends were prepared while using the solution casting method by fixing the content of starch and varying ratio of EPO. The thermal properties, such as glass transition temperature (Tg), melting temperature (Tm), and crystallization temperature (Tcc) were decreased by increasing the amount of EPO into PSt, indicating that EPO increases the chain mobility. Thermogravimetric analysis (TGA) showed that thermal degradation resistance of PSE was higher when compared to PSt. The mechanical testing revealed that EPO at all contents improved the mechanical properties, such as increment of the elongation-at-break and impact strength. Whereas, dynamic mechanical analysis showed that the addition of filler into PLA decreased the storage modulus of PLA. The carbonyl group of the aliphatic ester remained the same in the PSE blends. The morphological study verified the ductility of PSE blends surface when compared to the brittle surface of PSt. As for the soil burial tests, EPO accelerated the degradation of blends. From these results, it can be concluded that EPO improved the flexibility of PLA blends.
  12. Brza MA, Aziz SB, Anuar H, Alshehri SM, Ali F, Ahamad T, et al.
    Membranes (Basel), 2021 Apr 20;11(4).
    PMID: 33923927 DOI: 10.3390/membranes11040296
    Poly (vinyl alcohol) (PVA)-based solid polymer electrolytes doped with ammonium thiocyanate (NH4SCN) and glycerol were fabricated using a solution casting method. Lithium-based energy storage devices are not environmentally friendly materials, and they are toxic. Thus, proton-conducting materials were used in this work as they are harmless and are smaller than lithium. The interaction between PVA and the electrolyte elements was shown by FTIR analysis. The highest conductivity of 1.82 × 10-5 S cm-1 was obtained by the highest-conducting plasticized system (PSP_2) at room temperature. The mobility, diffusion coefficient, and number density of anions and cations were found to increase with increasing glycerol. FESEM was used to investigate the influence of glycerol on film morphology. TNM showed that the cations and anions were the main charge carriers. LSV showed that the electrochemical stability window of the PSP_2 system was 1.99 V. The PSP_2 system was applied in the preparation of an electrical double layer capacitor device. The shape of the cyclic voltammetry (CV) curve was nearly rectangular with no Faradaic peaks. From the galvanostatic charge-discharge analysis, the power density, energy density, and specific capacitance values were nearly constant beyond the first cycle at 318.73 W/Kg, 2.06 Wh/Kg, and 18.30 F g-1, respectively, for 450 cycles.
  13. Adli SA, Ali F, Azmi AS, Anuar H, Nasir NAM, Hasham R, et al.
    Polymers (Basel), 2020 Jul 27;12(8).
    PMID: 32727165 DOI: 10.3390/polym12081669
    The usage of non-degradable polymer as the main matrix for a cosmetic patch raises concern, as it can cause environmental pollution when discarded in landfill. Thus, biodegradable polylactic acid (PLA) was chosen in this study, as PLA has non-toxic properties and similar mechanical properties to conventional plastic materials. An active ingredient in a cosmetic patch serves the purpose of providing beneficial ingredients to the skin; therefore, phycocyanin, an extract from spirulina, was chosen, as it possesses antioxidant and anti-inflammatory properties. Alginate was also incorporated with the phycocyanin for fabrication onto the PLA matrix. A preliminary study was first carried out to identify the antioxidant properties and cytotoxic effect of the phycocyanin on skin cells. It was observed that phycocyanin had no cytotoxic effect on the skin and showed good antioxidant activity. PLA/phycocyanin-alginate composite was fabricated using a solvent casting method, and optimization of preparation conditions (phycocyanin/alginate ratio, stirring time, and temperature) were carried out using the one-factor-at-a-time (OFAT) method with responses of elongation at break and releasing properties. Attenuated total reflectance (ATR)-FTIR analysis was also conducted to further analyze the functional group of the composites. Surface morphologies were observed for samples before and after the releasing test. From the analyses conducted, PLA/phycocyanin-alginate composite prepared at a phycocyanin/alginate ratio of 40/60 for 20 h at 20 °C gave the best properties in terms of flexibility of film and releasing properties of phycocyanin.
  14. Brza MA, Aziz SB, Anuar H, Ali F, Dannoun EMA, Mohammed SJ, et al.
    Sci Rep, 2020 Oct 22;10(1):18108.
    PMID: 33093604 DOI: 10.1038/s41598-020-75138-x
    In the present study black tea extract (BTE) solution which is familiar for drinking was used to prepare cerium metal-complexes (Ce(III)-complex). The prepared Ce(III)-complex was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and UV-Vis spectroscopy. The results indicate that BTE solution is a novel green coordination chemistry approach for the synthesis of metal complexes. The outcomes signify that coordination occurs between cerium cations and polyphenols. The synthesis of metal-complexes with superior absorption performance in the visible region is a challenge for optoelectronic device applications. The suspended Ce(III)-complex in distilled water was mixed with poly (vinyl alcohol) (PVA) polymer to fabricate PVA/ Ce(III)-complex composites with controlled optical properties. The PVA/Ce(III)-complexes composite films were characterized by FTIR, XRD, and UV-Vis spectroscopy. The XRD findings confirms the amorphous structure for the synthesized Ce(III)-complexes. The addition of Ce(III)-complex into the PVA host polymer led to the growth of polymer composites with controllable small optical band gaps. It is shown by the FTIR spectra of the composite films that the functional groups of the host PVA have a vigorous interaction with the Ce(III)-complex. The XRD deconvolution on PVA composites reveals the amorphous phase enlargement with increasing Ce(III)-complex concentration. It is indicated in the atomic force microscopy (AFM) that the surface roughness in the doped PVA films increases with the increase of the Ce(III)-complex. There is a decrease in absorption edge from 5.7 to 1.7 eV. It becomes possible to recognize the type of electron transition by studying both the Tauc's model and optical dielectric loss (ɛi) parameter.
  15. Brza MA, B Aziz S, Anuar H, Dannoun EMA, Ali F, Abdulwahid RT, et al.
    Polymers (Basel), 2020 Aug 23;12(9).
    PMID: 32842522 DOI: 10.3390/polym12091896
    In the present work, a novel polymer composite electrolytes (PCEs) based on poly(vinyl alcohol) (PVA): ammonium thiocyanate (NH4SCN): Cd(II)-complex plasticized with glycerol (Gly) are prepared by solution cast technique. The film structure was examined by XRD and FTIR routes. The utmost ambient temperature DC ionic conductivity (σDC) of 2.01 × 10-3 S cm-1 is achieved. The film morphology was studied by field emission scanning electron microscopy (FESEM). The trend of σDC is further confirmed with investigation of dielectric properties. Transference numbers of ions (tion) and electrons (tel) are specified to be 0.96 and 0.04, respectively. Linear sweep voltammetry (LSV) displayed that the PCE potential window is 2.1 V. The desired mixture of activated carbon (AC) and carbon black was used to fabricate the electrodes of the EDLC. Cyclic voltammetry (CV) was carried out by sandwiching the PCEs between two carbon-based electrodes, and it revealed an almost rectangular shape. The EDLC exhibited specific capacitance, energy density, and equivalent series resistance with average of 160.07F/g, 18.01Wh/kg, and 51.05Ω, respectively, within 450 cycles. The EDLC demonstrated the initial power density as 4.065 × 103 W/Kg.
  16. Okomoda VT, Abdulrahman AK, Khatoon H, Mithun S, Oladimeji AS, Abol-Munafi AB, et al.
    Plants (Basel), 2021 Apr 13;10(4).
    PMID: 33924298 DOI: 10.3390/plants10040755
    This study determined the effect of growth media and culture concentration on the growth, proximate, and microelement composition of Ankistrodesmus falcatus. The culture of A. falcatus was done using three media, namely Modified COMBO Medium (COMBO), Bold's Basal Medium (BBM), and Bristol, at two concentrations (50% and 100%). The results obtained show that the cell density (>3.5 × 107 cells/mL), optical density (>0.24), and specific growth rate (>0.429%/day) were significantly higher (p ≤ 0.05) in BBM and COMBO than in Bristol (<3.1 × 107 cells/mL; <0.23; <0.416%/day, respectively) at both concentrations. However, biomass was higher in BBM (>2.20 g/L) than in COMBO (1.87-2.13 g/L), while Bristol had the lowest value observed (1.70-1.73 g/L). Biochemical and microelement composition showed variations between media and at the different concentrations, with higher values observed in BBM and COMBO. Based on the growth parameters and nutritional composition, it was concluded that BBM and COMBO were better media for the propagation of A. falcatus growth than Bristol. The study also demonstrated that the microalgae can be cultured using half of the media's concentration to lower production costs.
  17. Chen HWJ, Marzo RR, Sapa NH, Ahmad A, Anuar H, Baobaid MF, et al.
    Healthcare (Basel), 2023 May 17;11(10).
    PMID: 37239741 DOI: 10.3390/healthcare11101455
    BACKGROUND: While social media continues to dominate, social media platforms have become powerful health communication tools for older users. However, fulfilling their social media needs can be both detrimental and beneficial to their quality of life (QoL). This study assessed social media needs as they relate to QoL among older adults in Malaysia.

    METHODS: We conducted a cross-sectional study and adopted convenience sampling to recruit participants. The participants were required to self-report their sociodemographic profile, social media use and needs, and QoL. Social media use and needs were assessed using the Social Networking Sites Uses and Needs (SNSUN) scale, and QoL was assessed using the WHOQOL-BREF questionnaire. Multiple linear regression was performed to identify the predictors of QoL.

    RESULTS: The findings revealed that the fulfilment of social integrative needs was the strongest predictor of higher QoL in all domains. However, those using social media for their affective needs demonstrated lower psychological health quality.

    CONCLUSIONS: Fulfilling social integrative needs is the key to improving the QoL among older adults. The continuous development of age-friendly applications is essential to keep up with constantly changing social media trends and bridge the gap of social media inequalities. More importantly, it would enable older adults to utilize social media to its fullest potential and enjoy a higher QoL through accessible health communication tools.

Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links