MATERIALS AND METHODS: Forty discs each of Fuji LX, Fuji VII and of Vitrebond were prepared in a plastic mould. Twenty discs of each material were coated for 30 seconds with a 10% solution of AgF. Five discs each of coated and uncoated material were placed individually in 4m1 of differing eluant solutions. The eluant solutions comprised deionized distilled water (DDW) and three separate acetate buffered solutions at pH 7, pH 5 and pH 3. After 30 minutes the discs were removed and placed in five vials containing 4m1 of the various solutions for a further 30 minutes. This was repeated for further intervals of time up to 216 hours, and all eluant solutions were stored. Fluoride concentrations in the eluant solutions were estimated using a fluoride specific electrode, with TISAB IV as a metal ion complexing and ionic concentration adjustment agent. Cumulative fluoride release patterns were determined from the incremental data.
RESULTS: The coating of AgF greatly enhanced the level of fluoride ion release from all materials tested. Of the uncoated samples, Vitrehond released the greater concentrations of fluoride ion, followed by Fuji VII. However, cumulative levels of fluoride released from coated samples of the GICs almost matched those from coated Vitrebond.
CONCLUSIONS: It was concluded that a coating of 10% AgF on GICs and a resin modified GIC greatly enhanced the concentration of fluoride released from these materials. This finding might be applied to improving protection against recurrent caries, particularly in high caries risk patients, and in the atraumatic restorative technique (ART) of restoration placement.
MATERIALS AND METHODS: A gypsum mold was coated with clear acrylic spray. The coated mold was then used to produce modified silicone experimental specimens (n = 35). The surface roughness of the modified silicone elastomers was compared with that of the control specimens, which were prepared by conventional flasking methods (n = 35). An atomic force microscope (AFM) was used for surface roughness measurement of silicone elastomer (unmodified and modified), and a scanning electron microscope (SEM) was used to evaluate the topographic conditions of coated and noncoated gypsum and silicone elastomer specimens (unmodified and modified) groups. After the gypsum molds were characterized, the fabricated silicone elastomers molded on noncoated and coated gypsum materials were evaluated further. Energy-dispersive X-ray spectroscopy (EDX) analysis of gypsum materials (noncoated and coated) and silicone elastomer specimens (unmodified and modified) was performed to evaluate the elemental changes after coating was conducted. Independent t test was used to analyze the differences in the surface roughness of unmodified and modified silicone at a significance level of p < 0.05.
RESULTS: Roughness was significantly reduced in the silicone elastomers processed against coated gypsum materials (p < 0.001). The AFM and SEM analysis results showed evident differences in surface smoothness. EDX data further revealed the presence of the desired chemical components on the surface layer of unmodified and modified silicone elastomers.
CONCLUSIONS: Silicone elastomers with lower surface roughness of maxillofacial prostheses can be obtained simply by coating a gypsum mold.
MATERIALS AND METHODS: A total of 3,175 adult University Malaya Medical Centre (UMMC) patients deemed free of any calcium metabolism disorders were selected and divided into two groups for derivation and validation. Simple linear regression associating total calcium and albumin was constructed from the data in the derivation group. The new albumin-adjusted calcium equation was validated in the validation group. Differences in calcium status classification following adjustments based on existing and new albumin-adjusted calcium equation was compared in a 469 hypoalbuminaemic patients.
RESULT: The new albumin adjusted calcium equation was: total calcium + 0.014 x (39-albumin). Of the 469 hypoalbuminemic patients, 78 were classified differently based on new equation. Based on the new equation, 55 normocalcemic patients were classified as hypocalcemic and 22 were classified as normocalcemic instead of hyperclacaemic.
CONCLUSION: Based on the newly derived albuminadjusted calcium equation 17% of patients had different adjusted calcium classifications. This could potentially impact in the management. It is recommended that laboratories derive equations specific to their calcium/albumin methods and analytical platforms.
MATERIALS AND METHODS: Candida albicans, Streptococcus mutans, and Staphylococcus aureus were incubated with modified and unmodified silicone groups (N = 35) for 30 days at 37°C. The counts of viable microorganisms in the accumulating biofilm layer were determined and converted to cfu/cm2 unit surface area. A scanning electron microscope (SEM) was used to evaluate the microbial adhesion. Statistical analysis was performed using t-test, one-way ANOVA, and post hoc tests as indicated.
RESULTS: Significant differences in microbial adhesion were observed between modified and unmodified silicone elastomers after the cells were incubated for 30 days (p < 0.001). SEM showed evident differences in microbial adhesion on modified silicone elastomer compared with unmodified silicone elastomer.
CONCLUSIONS: Surface modification of silicone elastomer yielding a smoother and less porous surface showed lower adhesion of different microorganisms than observed on unmodified surfaces.
METHODS: Sixty-five extracted maxillary incisors were decoronated, its canal was artificially flared and randomly categorized into group tFRC (tapered FRC post) (n = 22), mFRC (multi-FRC post) (n = 21), and DIS-FRC (direct individually shaped-FRC (DIS-FRC) post) (n = 22), which were further subdivided based on cementation resin. The posts were cemented and a standardized resin core was constructed. After thermocycling, the samples were loaded statically and the maximum load was recorded.
RESULTS: The load capacity of the maxillary central incisor was influenced by the different FRC post system and not the resin cement (p = 0.289), and no significant interaction was found between them. Group mFRC (522.9N) yielded a significantly higher load capacity compared to DIS-FRC (421.1N). Overall, a 55% favorable fracture pattern was observed, and this was not statistically significant.
CONCLUSION: Within the limitation of the study, it can be concluded that prefabricated FRC posts outperform DIS-FRC posts in terms of the load capacity of a maxillary central incisor with a simulated flared root canal. The cementation methods whether a self-adhesive or self-etch resin cement, was not demonstrated to influence the load capacity of a maxillary central incisor with a flared root canal. There were no significant differences between the favorable and non-favorable fracture when FRC post systems were used to restored a maxillary central incisor with a flared root canal.
MATERIALS AND METHODS: This is an in vitro study using two extracted sound human mandibular molars. One tooth was prepared to receive the metal onlays and another one for the RNC onlays which were fabricated using the computer-aided design and computer-aided manufacturing (CAD/CAM) technology. Twelve metals and 12 ceramic onlays were fabricated before they were placed at their respective preparation and examined under the Leica stereomicroscope, M125C (Leica Microsystems, Wetzlar, Germany) for a marginal analysis. The gap width was measured at 10 predefined landmarks which included 3 points on the buccal and lingual surfaces each and 2 points each on the mesial and distal surfaces, respectively.
STATISTICAL ANALYSIS: Mann-Whitney post hoc test was used for statistical analysis (P ≤ 0.05).
RESULTS: Overall, the RNC onlays showed significant lower marginal gap with the exception of the landmarks 5 and 6 (on distolingual) and no significant difference at landmark 7 (on midlingual). It was observed that the marginal gap were all within the clinically acceptable limit of 120 μm.
CONCLUSIONS: Based on the results obtained, it can be concluded that the RNC CAD/CAM onlays are a promising alternative to the metal onlays.
MATERIALS AND METHODS: Self-administered questionnaires were distributed to 400 subjects. The questionnaire comprised three parts; the first part addressed the demographic variables. The second part queried about dental prosthesis, orthognathic or plastic surgery, and/or ongoing or previous orthodontic treatment. The third part included the Arabic version of the-8-item Orofacial Esthetic Scale (OES-Ar) whose responses were scored in the 5-point Likert scale. These scores were compared by different grouping factors (age, gender, marital status, and education) using non-parametric Mann-Whitney U and Kruskal Willis tests with 95% confidence interval (α > 0.05).
RESULTS: A total of 268 questionnaires were eligible for analysis, representing 67% response rate. The satisfaction with facial profile appearance was the highest (4.0±1.1) followed by facial appearance (3.9±1.1), while the color of teeth was the least satisfying item (3.1±1.3). No significant differences were found between age groups for the mean summary score as well as for each item independently. No significant difference was found between both sexes except for the last item "overall impression". Married subjects rated one item (alignment of teeth) better than their counterparts. Positive perception of orofacial appearance increased significantly with the increase of education level, the perception of the oral health status, and the perception of the general health status.
CONCLUSION: Good oral health and/or high education level are significant determinants of more positive perception of orofacial esthetic appearance. Patients with these characteristics might be more concerned about their orofacial appearance, and this should be taken into consideration before planning any esthetic restorative dental treatment.
Materials and Methods: In this in-vitro study, a total of 48 single-rooted permanent human teeth were decoronated, and the roots were treated endodontically. Following post space preparation, the sample was divided into four groups (n= 12 each) based on the types of post and cement. Two different types of post [GC everStick®POST (ES) and Parapost® Fiber LuxTM (PF)], and two different types of cement [G-CEMTM (G), and RelyXTM Unicem (R)] were used according to the manufacturer's instructions. All roots were sectioned at the coronal and middle thirds with a thickness of 3±0.1mm. The Push-out bond strength (PBS) test was performed using a universal testing machine at a cross-head speed of 0.5mm/ min. The bond strength values were recorded, and the data were analyzed using the SPSS program. Apart from descriptive statistics, three-way ANOVA was used for the interaction of the independent variables (post, cement, and root level). For differences between the groups, the Mann-Whitney U test was used. A P-value of less than 0.05 was considered significant for all analyses.
Results: Push-out bond strength of samples at the middle level (11.38±10.31 MPa), with PF posts (11.18±9.98 MPa), and of those luted with RelyXTM Unicem cement (13.26±8.73 MPa) was higher than that of their counterparts. The PBS means of RelyXTM Unicem cement at both root levels were much higher than PBS means of G-CEMTM cement. Three-way ANOVA test revealed a significant effect for each variable with a higher effect of cement (Sum of Squares= 1310.690; P< 0.001). No significant difference (P= 0.153) was found between the coronal and middle parts and between ES and PF posts (P= 0.058). However, a highly significant difference (P< 0.001) was found between RelyXTM Unicem and G-CEMTM cements.
Conclusion: The type of cement had a significant effect on push-out bond strength with RelyXTM Unicem which had higher values than G-CEMTM. However, the type of post and root level had no significant effect on PBS, although Parapost® Fiber LuxTM and middle root level had higher values than their counterparts.
METHODS: Online databases (PubMed, Scopus, Web of Science, ProQuest, and Google Scholar) were searched from date of inception till May 2020. Studies were included if they met the following criteria: 1) observational studies that assessed the relationship between EBV and OLP, 2) the study comprised OLP patients and control subjects, 3) diagnosis of OLP was confirmed histopathologically, and 4) articles were in English. Studies without control groups, experimental studies, case reports, and reviews were excluded. The fixed-effects model was performed for meta-analyses using RevMan 5.3 software.
RESULTS: A total of 10 studies comprising 386 OLP cases and 304 controls were included. Of these, only 8 studies were eligible for the meta-analysis. The results of the quality assessment showed that only 2 studies were of high quality, while the remaining studies were of moderate quality. The results of the pooled eight studies revealed a significant positive association between EBV and OLP (OR = 4.41, 95% CI: [2.74, 7.11], P
MATERIALS AND METHODS: Three search engines (Google, Yahoo!, and Bing) were searched. The first 20 consecutive websites from each engine were obtained and checked for eligibility. For the quality of the websites, the Health on the Net Foundation Code of Conduct (HONcode), the DISCERN tool, the Journal of the American Medical Association (JAMA) Benchmarks, and Google PageRank were used for the assessment of the included websites. For readability, an online web tool was used, including well-known analyzing indices [Flesch Kincaid grade level (FKGL), Simple Measure of Gobbledygook (SMOG), and Flesch Reading Ease (FRE)]. The acceptable readability level was set to be ≥80.0 for the FRE and <7 for the FKGL and SMOG. The data were presented in frequencies and percentages.
RESULTS: Out of the 60 screened websites, 14 websites were eligible for analysis. There was only one (7.1%) website that had the HONcode seal. The mean score of all websites based on the DISCERN tool was 29.6 ± 12.1, with no website achieved the high score (≥65). Only one (7.1%) website scored >5 based on Google PageRank. Regarding JAMA benchmarks, all websites achieved a mean score of 2.57 ± 1.1. The mean grade level based on the FKGL was 8.4 ± 6.3. All websites had a score of <7 according to the SMOG index. The mean score of the readability ease index was 90.5 ± 16.4.
CONCLUSION: Most of the dental health information on denture hygiene available on the Arabic websites did not have the required level of quality, regardless of being readable and comprehensible by most of the general people.
CLINICAL SIGNIFICANCE: Directing the patients to the appropriate websites related to their cases is the responsibility of the dentists.
METHODS: An online electronic search was performed using the PubMed, Scopus, and Web of Science databases for in vitro studies published from 2010 to 2020 in English. The retrieved eligible studies that compared the fracture resistance of titanium and fiber posts on human teeth were selected. The pooled standardized mean difference (SMD) with a 95% confidence interval was calculated. In addition, the trial sequential analysis (TSA) was performed to test if the available studies are sufficient to make conclusive evidence.
RESULTS: Of the 1165 retrieved studies, 17 studies were included in the qualitative analysis, while 16 studies were included in the quantitative analysis. Because of the high heterogeneity among studies, data from 10 studies were pooled and submitted to TSA. A total of 852 teeth were evaluated for fracture of the posts in 27 independent comparison groups. The pooled effect of the residual studies revealed no significant difference between titanium and fiber posts (SMD = -0.12; 95% CI = -0.30, 0.06; p = 0.20). Results of the TSA revealed no conclusive evidence.
CONCLUSIONS: The results of the current evidence revealed no significant difference between fiber and titanium posts. The evidence is insufficient, and more standardized in vitro studies are required.