Displaying publications 1 - 20 of 25 in total

Abstract:
Sort:
  1. Fulltext Albumin-fatty acid interactions at monolayer interface
    Gew LT, Misran M
    Nanoscale Res Lett, 2014;9(1):218.
    PMID: 24910574 DOI: 10.1186/1556-276X-9-218
    The fluid mosaic model of Singer and Nicolson in 1972 shows how proteins are embedded in membranes. To elucidate the interactions between proteins and the surrounding lipids, stearic acid (SA) and bovine serum albumin (BSA) were used as lipid-protein components to mimic the normal membrane bilayer environment using the Langmuir-Blodgett technique. Surface pressure (π)-molecular area (A) isotherms were recorded for the SA monolayer in the presence of BSA on water. The mixed monolayer was successfully transferred onto an oxidized silicon wafer and imaged by tapping mode atomic force microscopy (AFM). Miscibility, compressibility and thermodynamic stability of the mixed system were examined. A large negative deviation of A ex, together with the minimum value of ΔG ex, was observed when the mole fraction of BSA (X BSA) was 0.8, indicating this to be the most stable mixture. In a compressibility analysis, X BSA was observed at below 50 mN m(-1), denoting a liquid-expanded phase and showing the occurrence of a strong interaction of SA with BSA molecules in this phase. AFM observations supported the quantitative data indicating that BSA was strongly attracted onto the membrane surface as predicted.
  2. Characterization of fatty acid liposome coated with low-molecular-weight chitosan
    Tan HW, Misran M
    J Liposome Res, 2012 Dec;22(4):329-35.
    PMID: 22881198 DOI: 10.3109/08982104.2012.700459
    Preparation of chitosan-coated fatty acid liposomes is often restricted by the solubility of chitosan under basic conditions. In this experiment, the preparation of chitosan-coated oleic acid (OA) liposomes using low molecular weight (LMW) chitosan (10 and 25 kDA) was demonstrated. These selected LMW chitosans are water soluble. The coating of the chitosan layer on OA liposomes was confirmed by its microscope images and physicochemical properties, such as zeta potential and the size of the liposomes. The "peeling off" effect on the surface of chitosan-coated OA liposomes was observed in the atomic force microscope images and showed the occurrence of the chitosan layer on the surface of OA liposomes. The size of the chitosan-coated liposomes was at least 20 nm smaller than the OA liposomes, and the increase of zeta potential with the increasing amount of LMW chitosan further confirmed the presence of the surface modification of OA liposomes.
  3. Polysaccharide-anchored fatty acid liposome
    Tan HW, Misran M
    Int J Pharm, 2013 Jan 30;441(1-2):414-23.
    PMID: 23174410 DOI: 10.1016/j.ijpharm.2012.11.013
    In this study, the preparation of N-pamitoyl chitosan (ChP) anchored oleic acid (OA) liposome was demonstrated. Two different types of water-soluble ChPs with different degrees of acylation (DA) were selected for this study. The presence of ChPs on the surface of OA liposome was confirmed with their micrographs and physicochemical properties. The "peeling off" effect on the surface of the ChP-anchored OA (OAChP) liposomes was observed on the atomic force microscope micrographs and confirmed the presence of the ChPs layer on the liposome surface. The surface tension of the OAChPs liposome solution was found to be higher than that of the OA liposome solution. This result indicated the removal of OA monomer by ChPs from the air-water interface. The increase in the minimum area per headgroup (A(min)) of the OA with the presence of ChPs has further proved the interaction between OA monomer and the hydrophobic moieties of the ChPs. The ChPs anchored onto the OA monolayer increased the curvature of the OAChP liposomes monolayer and reduced the liposome size. The size of the OAChP liposomes was reduced by 30 nm as compared with the unmodified OA liposome. Results revealed that the anchored ChPs can improve the integrity and rigidity of the OA liposome.
  4. Fulltext Interaction between C18 fatty acids and DOPE PEG2000 in Langmuir monolayers: effect of degree of unsaturation
    Gew LT, Misran M
    J Biol Phys, 2017 Sep;43(3):397-414.
    PMID: 28752254 DOI: 10.1007/s10867-017-9459-2
    In this study, we address the effect of the cis-double bond in 1,2-dioleoyl-sn-glycero-3-phosphoethanolamide-N-[methoxy(polyethylene glycol)-2000, DOPE PEG2000 (DP), on the Langmuir monolayer of C18 fatty acids-namely, stearic acid (SA), oleic acid (L1), linoleic acid (L2), and linolenic acid (L3)-with the same head group but different degrees of saturation on their hydrocarbon chains. Negative values of Gibbs free energy of mixing (ΔG mix) were obtained throughout the investigated ranges of the unsaturated C18 fatty-acid (L1, L2 and L3) mixed systems, indicating that very strong attractions occurred between molecules in the monolayers. The bend and kink effects from the cis-double bond(s) in the hydrocarbon chain affected the membrane fluidity and molecular packing in the monolayers, which resulted in a greater interaction between unsaturated C18 fatty acids and DP. The most thermodynamically stable mole composition of unsaturated C18 fatty acids to DP was observed at 50:1; this ratio is suggested to be the best mole ratio and will be subsequently used to prepare DP-C18 fatty-acid nanoliposomes. The presence of cis-double bonds in both hydrocarbon chains of DOPE in DP also created an imperfection in the membrane structure of lipid-drug delivery systems, which is expected to enhance lipid-based systems for antibody conjugation and drug encapsulation.
  5. Fulltext Physicochemical Properties and Release Study of Antimetabolite-Incorporated Stearoyl Chitosan
    Marlina A, Misran M
    ACS Omega, 2023 Oct 31;8(43):40494-40507.
    PMID: 37929136 DOI: 10.1021/acsomega.3c05108
    Stearoyl chitosan (SC), derived from the acylation of chitosan, contributes to the efficiency of drug delivery systems because of its structure, which accommodates the drug in a particle. Nonetheless, its role in chemotherapy has been largely unexplored. The present study involves the synthesis of stearoyl chitosan through the reaction of depolymerized chitosan with stearoyl chloride under mild reaction conditions. The resulting compound was subjected to structural analysis utilizing Fourier-transform infrared (FTIR) spectroscopy, 1H NMR, and X-ray diffraction (XRD) spectroscopy. The dispersion of SC molecules in phosphate-buffered saline (PBS) forms SC nanoparticles. The best dispersion of SC in the solution was achieved at a 1:60 chitosan-to-stearoyl chloride weight ratio. Three antimetabolite drugs, methotrexate, pemetrexed, and raltitrexed, were selected to examine the loading efficacy of SC. Pemetrexed had the highest drug-loading value of 36.8% among the three antimetabolites incorporated into SC, along with an encapsulation efficiency of 85.1%. The size of SC loaded with antimetabolites ranged from 225 to 369 nm, and their spherical form was verified via a transmission electron microscope. The in vitro release study showed that SC demonstrated controlled drug release, suggesting that SC nanoparticles have significant promise as a delivery strategy for chemotherapy.
  6. Effect of PEGylated lipid and Lecinol S-10 on physico-chemical properties and encapsulation efficiency of palmitoleate-palmitoleic acid vesicles
    Teo YY, Misran M, Low KH
    J Liposome Res, 2014 Sep;24(3):241-8.
    PMID: 24597523 DOI: 10.3109/08982104.2014.891234
    A vesicle is a microscopic particle composed of a lipid bilayer membrane that separates the inner aqueous compartment from the outer aqueous environment. Palmitoleate-palmitoleic acid vesicles were prepared and their physico-chemical properties were investigated. Moreover, mixed vesicles composed of palmitoleic acid and PEGylated lipid and/or a mixture of phospholipids were also prepared. The stabilizing effects of these double-chain lipids on the formation of palmitoleate-palmitoleic acid vesicles were studied. Stability of the vesicle suspension was examined using particle size and zeta potential at 30 °C. The magnitude of the zeta potential was relatively lower in the vesicle suspension with the presence of phospholipid. Although some of the mixed vesicles that were formed were not very stable, they displayed potential for encapsulating the active ingredient calcein and the encapsulation efficiencies of calcein were encouraging. The palmitoleate-palmitoleic acid-DPPE-PEG2000 vesicle showed the most promising stability and encapsulation efficiency.
  7. Mixed Oleic Acid-Erucic Acid Liposomes as a Carrier for Anticancer Drugs
    Eh Suk VR, Chung I, Misran M
    Curr Drug Deliv, 2020;17(4):292-302.
    PMID: 32039684 DOI: 10.2174/1567201817666200210122933
    BACKGROUND: Liposomes are mostly known to be prepared from phospholipids and lipids and have a remarkable capacity to encapsulate both lipophobic and lipophilic molecules. However, there is little research on developing fatty acid liposomes for chemotherapy.

    OBJECTIVE: We have successfully prepared mixed fatty acid liposomes from two monounsaturated fatty acids, namely oleic acid and erucic acid, which stabilised by DOPEPEG2000. The Critical Vesicular Concentration (CVC) of liposomes was found to be within 0.09 to 0.21 mmol dm-3, with an average particle size of 400 nm.

    METHODS: Encapsulation of various anticancer drugs such as folinic acid, methotrexate, doxorubicin, or irinotecan resulted in Encapsulation Efficiency (%EE) of up to 90%. Using a 3-(4, 5-dimethylthiazol-2- yl)-2,5-diphenyltetrazolium bromide (MTT) assay, the median Inhibitory Concentration (IC50) values of mixed oleic acid-erucic acid encapsulating hydrophilic drugs was remarkably reduced at the end of 24 hours of incubation with the human lung carcinoma cell line A549.

    RESULTS: The results suggest that mixed oleic acid-erucic acid liposomes are a potential new approach to further develop as an alternative vehicle of various drugs for cancer treatment.

  8. Fulltext Development of a controlled release of salicylic acid loaded stearic acid-oleic acid nanoparticles in cream for topical delivery
    Woo JO, Misran M, Lee PF, Tan LP
    ScientificWorldJournal, 2014;2014:205703.
    PMID: 24578624 DOI: 10.1155/2014/205703
    Lipid nanoparticles are colloidal carrier systems that have extensively been investigated for controlled drug delivery, cosmetic and pharmaceutical applications. In this work, a cost effective stearic acid-oleic acid nanoparticles (SONs) with high loading of salicylic acid, was prepared by melt emulsification method combined with ultrasonication technique. The physicochemical properties, thermal analysis and encapsulation efficiency of SONs were studied. TEM micrographs revealed that incorporation of oleic acid induces the formation of elongated spherical particles. This observation is in agreement with particle size analysis which also showed that the mean particle size of SONs varied with the amount of OA in the mixture but with no effect on their zeta potential values. Differential scanning calorimetry analysis showed that the SONs prepared in this method have lower crystallinity as compared to pure stearic acid. Different amount of oleic acid incorporated gave different degree of perturbation to the crystalline matrix of SONs and hence resulted in lower degrees of crystallinity, thereby improving their encapsulation efficiencies. The optimized SON was further incorporated in cream and its in vitro release study showed a gradual release for 24 hours, denoting the incorporation of salicylic acid in solid matrix of SON and prolonging the in vitro release.
  9. Fulltext (2-{[1,1-Bis(hydroxy-meth-yl)-2-oxidoeth-yl]imino-meth-yl}-4-chloro-phenolato-κN,O,O')dibutyl-tin(IV)
    Reisi R, Misran M, Lo KM, Ng SW
    Acta Crystallogr Sect E Struct Rep Online, 2010;66(Pt 4):m482.
    PMID: 21580562 DOI: 10.1107/S1600536810011384
    The Schiff base ligand in the title compound, [Sn(C(4)H(9))(2)(C(11)H(12)ClNO(4))], chelates to the Sn atom through the two deprotonated O atoms, as well as through the N atom, to confer an overall cis-C(2)SnNO(2) trigonal-bipyramidal geometry at tin [C-Sn-C = 130.3 (1)°]. The hydr-oxy groups engage in O-H⋯O hydrogen bonding with the O atoms of adjacent mol-ecules, generating a chain running along the c axis.
  10. Fulltext Triclinic modification of di-n-butyl-bis(2-hydroxy-benzoato-κO,O)tin(IV)
    Reisi R, Misran M, Lo KM, Ng SW
    Acta Crystallogr Sect E Struct Rep Online, 2008;64(Pt 9):m1187.
    PMID: 21201627 DOI: 10.1107/S1600536808023799
    The Sn atom in the title compound, [Sn(C(4)H(9))(2)(C(7)H(5)O(3))(2)], is chelated by the carboxyl-ate groups of 2-hydroxy-benzoate liagnds, and exists in a six-coordinate skew-trapezoidal bipyramidal coordination geometry [C-Sn-C = 140.1 (3)°].
  11. Fulltext Development of nanostructured lipid carrier (NLC) assisted with polysorbate nonionic surfactants as a carrier for l-ascorbic acid and Gold Tri.E 30
    Eh Suk VR, Mohd Latif F, Teo YY, Misran M
    J Food Sci Technol, 2020 Sep;57(9):3259-3266.
    PMID: 32728274 DOI: 10.1007/s13197-020-04357-x
    Lipid nanocarrier displays the advantages over conventional drug carriers as they are formulated with biodegradable and non-irritant lipids. However, the main drawbacks are the agglomeration of lipid particles, instability over storage, low drug loading, and the burst release of active ingredients. In this study, we investigated the effects of various polysorbate nonionic surfactants namely Tween 20, 40, 60, or 80 on the nanostructured lipid carrier (NLC). NLC incorporated with polysorbate nonionic surfactant was prepared by using high-pressure homogenization technique. The average size was reduced to 139.9 ± 15.8 nm in the presence of Tween 80 and remained stable in nano-size even incubated for 28 days. Encapsulation of l-ascorbic acid or Gold Tri.E 30 showed a high encapsulation efficiency of more than 75%, where the highest was Gold Tri.E in the presence of Tween 60 at 99.7%. In vitro release study showed that the release of both l-ascorbic acid and Gold Tri.E was significantly reduced in NLC with Tween as compared to bare active ingredients and NLC without Tween. In conclusion, the incorporation of Tween successfully produced a lipid nanocarrier that has the potential to be developed as a carrier of various active ingredients such as nutrients, extracts, and drugs.
  12. Formulation and in vitro and in vivo evaluation of a new osteoprotegerin-chitosan gel for bone tissue regeneration
    Jayash SN, Hashim NM, Misran M, Baharuddin NA
    J Biomed Mater Res A, 2017 02;105(2):398-407.
    PMID: 27684563 DOI: 10.1002/jbm.a.35919
    The osteoprotegerin (OPG) system plays a critical role in bone remodelling by regulating osteoclast formation and activity. The study aimed to determine the physicochemical properties and biocompatibility of a newly formulated OPG-chitosan gel. The OPG-chitosan gel was formulated using human OPG protein and water-soluble chitosan. The physicochemical properties were determined using Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Gel morphology was determined using scanning electron microscopy (SEM) and then it was subjected to a protein release assay and biodegradability test. An in vitro cytotoxicity test on normal human periodontal ligament (NHPL) fibroblasts and normal human (NH) osteoblasts was carried out using the AlamarBlue assay. In vivo evaluation in a rabbit model involved creating critical-sized defects in calvarial bone, filling with the OPG-chitosan gel and sacrificing at 12 weeks. In vitro results demonstrated that the 25 kDa OPG-chitosan gel had the highest rate of protein release and achieved 90% degradation in 28 days. At 12 weeks, the defects filled with 25 kDa OPG-chitosan gel showed significant (p 
  13. In vitro evaluation of osteoprotegerin in chitosan for potential bone defect applications
    Jayash SN, Hashim NM, Misran M, Baharuddin NA
    PeerJ, 2016;4:e2229.
    PMID: 27635307 DOI: 10.7717/peerj.2229
    The receptor activator of nuclear factor kappa-B (RANK)/RANK ligand/osteoprotegerin (OPG) system plays a critical role in bone remodelling by regulating osteoclast formation and activity. OPG has been used systemically in the treatment of bone diseases. In searching for more effective and safer treatment for bone diseases, we investigated newly formulated OPG-chitosan complexes, which is prepared as a local application for its osteogenic potential to remediate bone defects.
  14. Fulltext Local application of osteoprotegerin-chitosan gel in critical-sized defects in a rabbit model
    Jayash SN, Hashim NM, Misran M, Baharuddin NA
    PeerJ, 2017;5:e3513.
    PMID: 28674665 DOI: 10.7717/peerj.3513
    BACKGROUND: Osteoprotegerin (OPG) is used for the systemic treatment of bone diseases, although it has many side effects. The aim of this study was to investigate a newly formulated OPG-chitosan gel for local application to repair bone defects. Recent studies have reported that immunodetection of osteopontin (OPN) and osteocalcin (OC) can be used to characterise osteogenesis and new bone formation.

    METHODS: The osteogenic potential of the OPG-chitosan gel was evaluated in rabbits. Critical-sized defects were created in the calvarial bone, which were either left unfilled (control; group I), or filled with chitosan gel (group II) or OPG-chitosan gel (group III), with rabbits sacrificed at 6 and 12 weeks. Bone samples from the surgical area were decalcified and treated with routine histological and immunohistochemical protocols using OC, OPN, and cathepsin K (osteoclast marker) antibodies. The toxicity of the OPG-chitosan gel was evaluated by biochemical assays (liver and kidney function tests).

    RESULTS: The mean bone growth in defects filled with the OPG-chitosan gel was significantly higher than those filled with the chitosan gel or the unfilled group (p 

  15. Optimization of processing parameters for the preparation of phytosterol microemulsions by the solvent displacement method
    Leong WF, Che Man YB, Lai OM, Long K, Misran M, Tan CP
    J Agric Food Chem, 2009 Sep 23;57(18):8426-33.
    PMID: 19694442 DOI: 10.1021/jf901853y
    The purpose of this study was to optimize the parameters involved in the production of water-soluble phytosterol microemulsions for use in the food industry. In this study, response surface methodology (RSM) was employed to model and optimize four of the processing parameters, namely, the number of cycles of high-pressure homogenization (1-9 cycles), the pressure used for high-pressure homogenization (100-500 bar), the evaporation temperature (30-70 degrees C), and the concentration ratio of microemulsions (1-5). All responses-particle size (PS), polydispersity index (PDI), and percent ethanol residual (%ER)-were well fit by a reduced cubic model obtained by multiple regression after manual elimination. The coefficient of determination (R(2)) and absolute average deviation (AAD) value for PS, PDI, and %ER were 0.9628 and 0.5398%, 0.9953 and 0.7077%, and 0.9989 and 1.0457%, respectively. The optimized processing parameters were 4.88 (approximately 5) homogenization cycles, homogenization pressure of 400 bar, evaporation temperature of 44.5 degrees C, and concentration ratio of microemulsions of 2.34 cycles (approximately 2 cycles) of high-pressure homogenization. The corresponding responses for the optimized preparation condition were a minimal particle size of 328 nm, minimal polydispersity index of 0.159, and <0.1% of ethanol residual. The chi-square test verified the model, whereby the experimental values of PS, PDI, and %ER agreed with the predicted values at a 0.05 level of significance.
  16. Fulltext Octa-n-butyl-1κC,2κC,3κC,4κC-tetra-kis(μ-2-hydroxy-benzoato)-1:2κO:O;2:3κO:O';3:4κO:O;1:4κO:O'-di-μ(3)-oxido-1:2:3κO:O:O;1:3:4κO:O:O-tetra-tin(IV)
    Reisi R, Siti Munirah S, Misran M, Lo KM, Ng SW
    Acta Crystallogr Sect E Struct Rep Online, 2008;64(Pt 8):m1103.
    PMID: 21203075 DOI: 10.1107/S1600536808023787
    In the centrosymmetric tetra-nuclear title compound, [Sn(4)(C(4)H(9))(8)(C(7)H(5)O(3))(4)O(2)], one of the two independent Sn atoms is five-coordinate in a cis-C(2)SnO(3) trigonal-bipyramidal geometry [C-Sn-C = 142.7 (1)°]; the geometry is distorted owing to a long Sn⋯O(double bond) inter-action [Sn⋯O = 2.862 (1) Å]. The other Sn atom has a bent R(2)Sn skeleton [C-Sn-C = 144.0 (1)°], but the geometry is best regarded as being a trans-C(2)SnO(4) octa-hedron as the Sn-O(single bond) inter-action is shorter [Sn-O = 2.674 (1) Å].
  17. Experimental investigation on the use of highly charged nanoparticles to improve the stability of weakly charged colloidal system
    Zubir MN, Badarudin A, Kazi SN, Misran M, Amiri A, Sadri R, et al.
    J Colloid Interface Sci, 2015 Sep 15;454:245-55.
    PMID: 26048724 DOI: 10.1016/j.jcis.2015.05.019
    The present work highlighted on the implementation of a unique concept for stabilizing colloids at their incipiently low charge potential. A highly charged nanoparticle was introduced within a coagulated prone colloidal system, serving as stabilizer to resist otherwise rapid flocculation and sedimentation process. A low size asymmetry of nanoparticle/colloid serves as the new topic of investigation in addition to the well-established large size ratio nanoparticle/microparticle study. Highly charged Al2O3 nanoparticles were used within the present research context to stabilize TiO2 and Fe3O4 based colloids via the formation of composite structures. It was believed, based on the experimental evidence, that Al2O3 nanoparticle interact with the weakly charged TiO2 and Fe3O4 colloids within the binary system via absorption and/or haloing modes to increase the overall charge potential of the respective colloids, thus preventing further surface contact via van der Waal's attraction. Series of experimental results strongly suggest the presence of weakly charged colloids in the studied bimodal system where, in the absence of highly charged nanoparticle, experience rapid instability. Absorbance measurement indicated that the colloidal stability drops in accordance to the highly charged nanoparticle sedimentation rate, suggesting the dominant influence of nanoparticles to attain a well-dispersed binary system. Further, it was found that the level of colloidal stability was enhanced with increasing nanoparticle fraction within the mixture. Rheological observation revealed that each hybrid complexes demonstrated behavior reminiscence to water with negligible increase in viscosity which serves as highly favorable condition particularly in thermal transport applications.
  18. Fulltext Development and Evaluation of 1'-Acetoxychavicol Acetate (ACA)-Loaded Nanostructured Lipid Carriers for Prostate Cancer Therapy
    Subramaniam B, Arshad NM, Malagobadan S, Misran M, Nyamathulla S, Mun KS, et al.
    Pharmaceutics, 2021 Mar 24;13(4).
    PMID: 33804975 DOI: 10.3390/pharmaceutics13040439
    1'-acetoxychavicol acetate (ACA) extracted from the rhizomes of Alpinia conchigera Griff (Zingiberaceae) has been shown to deregulate the NF-ĸB signaling pathway and induce apoptosis-mediated cell death in many cancer types. However, ACA is a hydrophobic ester, with poor solubility in an aqueous medium, limited bioavailability, and nonspecific targeting in vivo. To address these problems, ACA was encapsulated in a nanostructured lipid carrier (NLC) anchored with plerixafor octahydrochloride (AMD3100) to promote targeted delivery towards C-X-C chemokine receptor type 4 (CXCR4)-expressing prostate cancer cells. The NLC was prepared using the melt and high sheer homogenization method, and it exhibited ideal physico-chemical properties, successful encapsulation and modification, and sustained rate of drug release. Furthermore, it demonstrated time-based and improved cellular uptake, and improved cytotoxic and anti-metastatic properties on PC-3 cells in vitro. Additionally, the in vivo animal tumor model revealed significant anti-tumor efficacy and reduction in pro-tumorigenic markers in comparison to the placebo, without affecting the weight and physiological states of the nude mice. Overall, ACA-loaded NLC with AMD3100 surface modification was successfully prepared with evidence of substantial anti-cancer efficacy. These results suggest the potential use of AMD3100-modified NLCs as a targeting carrier for cytotoxic drugs towards CXCR4-expressing cancer cells.
  19. Fulltext Large-scale structure formation in ionic solution and its role in electrolysis and conductivity
    Yee CN, Ooi CHR, Tan LP, Misran M, Tang NT
    PLoS One, 2019;14(3):e0213697.
    PMID: 30913207 DOI: 10.1371/journal.pone.0213697
    That water may not be an inert medium was indicated by the presence at water's interfaces a negatively charged solute free zone of several hundred microns in thickness called the exclusion zone (EZ). Further evidence was demonstrated by Ovchinnikova's experiments (2009) showing that water can store and release substantial amount of charge. We demonstrate that the charge storage capacity of water arises from highly stable large-scale ionic structures with measurable charge imbalances and discrete levels of charge density. We also show evidence that the charge zones formation requires ionic solutes, and their formation correlate to large change in conductivity, by as much as 250%. Our experiments indicate that large-scale structuring plays a pivotal role in electrolysis and conductivity in ionic solution. We propose that water is an electrochemically active medium and present a new model of electrolysis and conductivity in ionic solution.
  20. Cholesterol-linoleic acid liposomes induced extracellular vesicles secretion from immortalized adipose-derived mesenchymal stem cells for in vitro cell migration
    Chen JW, Liew FF, Tan HW, Misran M, Chung I
    Artif Cells Nanomed Biotechnol, 2023 Dec;51(1):346-360.
    PMID: 37524112 DOI: 10.1080/21691401.2023.2237534
    Extracellular vesicles (EVs) are small vesicles that are naturally released by cells and play a crucial role in cell-to-cell communication, tissue repair and regeneration. As naturally secreted EVs are limited, liposomes with different physicochemical properties, such as 1,2-dioleoyl-3-trimethylammonium propane (DOTAP) and linoleic acid (LA) with modifications have been formulated to improve EVs secretion for in vitro wound healing. Various analyses, including dynamic light scattering (DLS) and transmission electron microscopy (TEM) were performed to monitor the successful preparation of different types of liposomes. The results showed that cholesterol-LA liposomes significantly improved the secretion of EVs from immortalized adipose-derived mesenchymal stem cells (AD-MSCs) by 1.5-fold. Based on the cell migration effects obtained from scratch assay, both LA liposomal-induced EVs and cholesterol-LA liposomal-induced EVs significantly enhanced the migration of human keratinocytes (HaCaT) cell line. These findings suggested that LA and cholesterol-LA liposomes that enhance EVs secretion are potentially useful and can be extended for various tissue regeneration applications.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links