METHODS: Chorionic arteries and veins were isolated from human placenta from normal, gestational diabetes mellitus and type 1 diabetes mellitus pregnancies. Isometric tension recording measured responses to adenosine and the thromboxane A2 analogue U46619 (thromboxane A2 mediates fetoplacental vasoconstriction to adenosine). Adenosine and thromboxane prostanoid receptor protein expression was determined by immunoblotting.
RESULTS: Adenosine elicited contractions in chorionic arteries and veins which were impaired in both gestational diabetes mellitus and type 1 diabetes mellitus. Contractions to potassium chloride were unchanged. Adenosine A2A and A2B receptor protein levels were not different in gestational diabetes mellitus and normal pregnancies. Contractions to U46619 were unaltered in gestational diabetes mellitus arteries and increased in type 1 diabetes mellitus arteries. Overnight storage of vessels restored contractility to adenosine in gestational diabetes mellitus arteries and normalized contraction to U46619 in type 1 diabetes mellitus arteries.
CONCLUSION: These data are consistent with the concept of aberrant adenosine signalling in diabetes; they show for the first time that this involves impaired adenosine contractility of the fetoplacental vasculature.
METHODS: Different volume percentages of HEMA were tested in four experimental silane-based primer solutions (additions of HEMA: 0, 5.0 vol%, 25.0 vol% and 50.0 vol%). An experimental silane blend (primer) of 1.0 vol% 3-isocyanatopropyltrimethoxysilane (ICMS) + 0.5% bis-1,2-(triethoxysilyl) ethane (BTSE) was prepared and used. The experimental primers together with the control group were applied onto acid-etched premolars for attachment of orthodontic brackets. After artificial aging by thermocycling the shear-bond strength was measured. The fractured surfaces of all specimens were examined under scanning electron microscopy (SEM) to evaluate the failure mode on the enamel surface.
RESULTS: The experimental primers showed the highest shear-bond strength of 21.15 MPa (SD ± 2.70 MPa) and with 25 vol% showed a highly significant increase (P < 0.05) in bond strength. The SEM images showed full penetration of adhesive agents when using silane-based primers. In addition, the SEM images suggested that the predominant failure type was not necessarily the same as for the failure propagation.
CONCLUSIONS: This preliminary study suggested that nonacidic silane-based primers with HEMA addition might be an alternative to for use as adhesion promoting primers.
METHODS: The medical records of 118 Malay patients with oral cancer admitted in HUSM from 1st January 1986 to 31st December 2005 were reviewed. Data collected include socio-demographic background, high-risk habits practiced, clinical and histological characteristics, and treatment profile of the patients. Survival status and duration were determined by active validation until 31st December 2006. Data entry and analysis were accomplished using SPSS version 12.0. The Kaplan-Meier method was used to perform survival estimates while the log-rank test and the Cox proportional hazards regression model were employed to perform univariate analysis and multivariable analysis of the variables, respectively.
RESULTS: The overall five-year survival rate of Malay patients with oral cancer was 18.0%, with a median survival time of 9 months. Significant factors that influenced survival of the patients were age, sex, tumour site, TNM stage, histological type, and treatment received.
CONCLUSION: Survival of oral cancer patients in HUSM was very low. Being elderly, male, presenting with an advanced stage at diagnosis, and not having treatment all contributed to poor survival.
OBJECTIVES: The aim of this study was to compare the biaxial flexural strength of three core ceramic materials.
MATERIAL AND METHODS: Three groups of 10 disc-shaped specimens (16 mm diameter x 1.2 mm thickness - in accordance with ISO-6872, 1995) were made from the following ceramic materials: Turkom-Cera Fused Alumina [(Turkom-Ceramic (M) Sdn Bhd, Puchong, Selangor, Malaysia)], In-Ceram (Vita Zahnfabrik, Bad Säckingen, Baden-Württemberg, Germany) and Vitadur-N (Vita Zahnfabrik, Bad Säckingen, Baden-Württemberg, Germany), which were sintered according to the manufacturer's recommendations. The specimens were subjected to biaxial flexural strength test in an universal testing machine at a crosshead speed of 0.5 mm/min. The definitive fracture load was recorded for each specimen and the biaxial flexural strength was calculated from an equation in accordance with ISO-6872.
RESULTS: The mean biaxial flexural strength values were: Turkom-Cera: 506.8 ± 87.01 MPa, In-Ceram: 347.4 ± 28.83 MPa and Vitadur-N: 128.7 ± 12.72 MPa. The results were analyzed by the Levene's test and Dunnett's T3 post-hoc test (SPSS software V11.5.0 for Windows, SPSS, Chicago, IL, USA ) at a preset significance level of 5% because of unequal group variances (P<0.001). There was statistically significant difference between the three core ceramics (P<0.05). Turkom-Cera showed the highest biaxial flexural strength, followed by In-Ceram and Vitadur-N.
CONCLUSIONS: Turkom-Cera core had significantly higher flexural strength than In-Ceram and Vitadur-N ceramic core materials.
MATERIALS AND METHODS: Sixmaster dies were duplicated from the prepared maxillary first premolar tooth using nonprecious metal alloy (Wiron 99). Ten copings of 0.6 mm thickness were fabricated from each type of ceramic, for a total of thirty copings. Two master dies were used for each group, and each of them was used to lute five copings. All groups were cemented with resin luting cement Panavia F according to manufacturer's instructions and received a static load of 5 kg during cementation. After 24 hours of distilled water storage at 37 degrees C, the copings were vertically compressed using a universal testing machine at a crosshead speed of 1 mm/min.
RESULTS: The results of the present study showed the following mean loads at fracture: Turkom-Cera (2184 +/- 164 N), In-Ceram (2042 +/- 200 N), and Procera AllCeram (1954 +/- 211 N). ANOVA and Scheffe's post hoc test showed that the mean load at fracture of Turkom-Cera was significantly different from Procera AllCeram (p < 0.05). Scheffe's post hoc test showed no significant difference between the mean load at fracture of Turkom-Cera and In-Ceram or between the mean load at fracture of In-Ceram and Procera AllCeram.
CONCLUSION: Because Turkom-Cera demonstrated equal to or higher loads at fracture than currently accepted all-ceramic materials, it would seem to be acceptable for fabrication of anterior and posterior ceramic crowns.
METHODS: A retrospective record review was conducted from August to December 2006 in HUSM. Of 133 patients with oral cancer diagnosed from 1986 to 2005, 118 were Malay. Data on socio-demographic background, high-risk habits practiced, clinical and histological characteristics, and treatment profile of the patients were obtained.
RESULTS: Malay patients with oral cancer were predominantly elderly, aged 60 years old and above (51.7%) at the time of diagnosis, with a mean age of 58.1 years (SD 16.81). Most patients were males (64.4%) and the majority of them were married (83.9%). More than half (58.5%) had been smokers, and of those who smoked, 89.9% were males. Some had a betel quid chewing habit (22.9%) but none ever consumed alcohol. The majority of the patients (77.1%) were diagnosed at stage IV. The tongue was the most usual site involved (37.3%) and squamous cell carcinoma was the most common histological type seen (75.4%).
CONCLUSIONS: The prevalence of oral cancer among Malay patients in HUSM is high (88.7%). It is predominantly found in elderly males and the majority of cases present at advanced stage.
MATERIALS AND METHODS: The flexural strength and flexural modulus of three OPEFB fiber-reinforced PMMA were compared with a conventional and a commercially available reinforced PMMA. The three test groups included OPEFB fibers of 0.5 mm thickness, 2.0 mm thickness, and OPEFB cellulose.
RESULTS: All test group specimens demonstrated improved flexural strength and flexural modulus over conventional PMMA. Reinforcement with OPEFB cellulose showed the highest mean flexural strength and flexural modulus, which were statistically significant when compared to the conventional and commercially reinforced PMMA used in this study. OPEFB fiber in the form of cellulose and 0.5 mm thickness fiber significantly improved flexural strength and flexural modulus of conventional PMMA resin. Further investigation on the properties of PMMA reinforced with OPEFB cellulose is warranted.
CONCLUSIONS: Natural OPEFB fibers, especially OPEFB in cellulose form, can be considered a viable alternative to existing commercially available synthetic fiber reinforced PMMA resin.
Objective: This study examined research productivity of NSAIDs in Malaysia.
Materials and Methods: This bibliometric study included all published research articles on NSAIDs from 1979 to 2018, which were conducted in Malaysia. The search databases such as Google Scholar, PubMed, ScienceDirect, and Scopus were used. Search terms included NSAIDs and specific drug names such as ibuprofen, celecoxib, and naproxen. Growth of publication, authorship pattern, citation analysis, journal index, type of studies, and geographical distribution of institutions publishing articles on NSAIDs were measured.
Results: Overall, 111 articles were retrieved from 1979 to 2018. The annual productivity of articles throughout the study fluctuated in which the highest productivity was in 2018, 12.61% (n = 14). Majority of articles were multiple authored, 99.10% (n = 109), and University of Science Malaysia (USM) produced the highest number of articles (30 articles). Most of the articles were International Scientific Indexing-indexed, 52.25% (n = 58), and the main issue studied in most of the articles was the drug formulation of NSAIDs.
Conclusion: The growth of NSAID research in Malaysia was slow, and the majority of research involved laboratory studies. Clinical studies evaluating the clinical outcomes of NSAIDs in patients, particularly using large healthcare databases are still lacking.
OBJECTIVE: The study aims to determine the QoL according to the severity of visual field using Bahasa Malaysia version of the Glaucoma Quality of Life- 36 (Glau-QoL 36) in older adults with POAG in Malaysia.
METHODS: A cross-sectional study was conducted in two tertiary hospitals in Malaysia: Hospital Universiti Sains Malaysia, Kelantan, and Hospital Selayang, Selangor. POAG patients who were ≥ 60 years old at the time of recruitment had minimal cataract, underwent cataract or trabeculectomy surgery at least 3 months prior and were on medical and surgical treatment. The severity of POAG was based on the modified Advanced Glaucoma Intervention Study (AGIS) score on two reliable reproducible Humphrey visual field SITA program 24-2 analysis. Face to face, one-on-one interview was conducted using validated Bahasa Malaysia version of GlauQol 36.
RESULTS: A total of 360 older adults with POAG were recruited. Majority were between ages 60-67 (38.3%) with 64 (17.8%) mild, 93 (25.8%) moderate, 115 (31.9%) severe POAG and 88 (24.4%) end-stage severity of POAG. The majority of the recruited patients were not working (88.9%) and live with their families (68.1%). There was a significant association between GlauQoL 36 score of all domains: daily living, driving, physiological well-being, self-image, anxiety, burden of treatment and confidence in healthcare with the severity of POAG (p<0.001). Increased severity of POAG was associated with decreased QoL in all GlauQoL 36 domains except confidence in healthcare. There was also a significant increase in dependency, with a majority of the end-stage were living with their families (p<0.001).
CONCLUSIONS: QoL and independency of older adults with POAG decrease with worsening of visual field defect. Addressing the problem of visual-related activities in older adults with POAG may reduce their dependency and QoL. Happy living is important to lead to healthy living among older adults with POAG.