Displaying publications 1 - 20 of 36 in total

Abstract:
Sort:
  1. Extraction of proteins from microalgae using integrated method of sugaring-out assisted liquid biphasic flotation (LBF) and ultrasound
    Sankaran R, Manickam S, Yap YJ, Ling TC, Chang JS, Show PL
    Ultrason Sonochem, 2018 Nov;48:231-239.
    PMID: 30080546 DOI: 10.1016/j.ultsonch.2018.06.002
    In this study, a simple sugaring-out supported by liquid biphasic flotation technique combined with ultrasonication was introduced for the extraction of proteins from microalgae. Sugaring-out as a phase separation method is novel and has been used in the extraction of metal ions, biomolecules and drugs. But, its functioning in protein separation from microalgae is still unknown. In this work, the feasibility of sugaring-out coupled with ultrasound for the extraction of protein was investigated. Primary studies were carried out to examine the effect of sonication on the microalgae cell as well as the separation efficiency of the integrated method. Effect of various operating parameters such as the concentration of microalgae biomass, the location of sonication probe, sonication time, ultrasonic pulse mode (includes varying ON and OFF duration of sonication), concentration of glucose, types of sugar, concentration of acetonitrile and the flow rate in the flotation system for achieving a higher separation efficiency and yield of protein were assessed. Besides, a large-scale study of the integration method was conducted to verify the consistency of the followed technique. A maximum efficiency (86.38%) and yield (93.33%) were attained at the following optimized conditions: 0.6% biomass concentration, 200 g/L of glucose concentration, 100% acetonitrile concentration with 5 min of 5 s ON/10 s OFF pulse mode and at a flow rate of 100 cc/min. The results obtained for large scale were 85.25% and 92.24% for efficiency and yield respectively. The proposed liquid biphasic flotation assisted with ultrasound for protein separation employing sugaring-out demonstrates a high production and separation efficiency and is a cost-effective solution. More importantly, this method provides the possibility of extending its application for the extraction of other important biomolecules.
    Matched MeSH terms: Acetonitriles/chemistry
  2. Kinetics and mechanism of intramolecular carboxylic acid participation in the hydrolysis of N-methoxyphthalamic acid
    Khan MN, Ariffin A
    Org Biomol Chem, 2003 Apr 21;1(8):1404-8.
    PMID: 12929671
    The rate of formation and disappearance of phthalic anhydride (PAn) intermediate in the aqueous cleavage of N-methoxyphthalamic acid (NMPA) under acidic pH was studied spectrophotometrically in mixed CH3CN-H2O solvents. The rate of formation of PAn from NMPA is almost independent of the change in acetonitrile content from 20 to 70% v/v in mixed aqueous solvents. The rate constants for the formation of PAn from NMPA are approximately 10-fold smaller than the corresponding rate constants for the formation of PAn from o-carboxybenzohydroxamic acid (OCBA). These observations are ascribed to the consequence of the occurrence of slightly different mechanisms in these reactions.
    Matched MeSH terms: Acetonitriles
  3. A Novel Optical Complex between an Organic Substrate and a Polyoxometalate. Crystal and Molecular Structure of alpha-H(4)SiW(12)O(40).4HMPA.2H(2)O (HMPA = Hexamethylphosphoramide)
    Niu Jy Jy, You Xz Xz, Duan Cy Cy, Fun Hk Hk, Zhou Zy Zy
    Inorg Chem, 1996 Jul 03;35(14):4211-4217.
    PMID: 11666630
    A solvated complex of alpha-H(4)SiW(12)O(40).4HMPA.2H(2)O composed the heteropolytungstate alpha-H(4)SiW(12)O(40) and the organic substrate hexamethylphosphoramide (HMPA) has been synthesised, purified, and characterized. The electronic spectra (lambda = 220-500 nm) as well as the (1)H NMR spectra for the title compound dissolved in CD(3)CN establish that this complex dissociates into free SiW(12)O(40)(4)(-) and HMPA moieties in solution unless the organic substrate HMPA is present in very high concentrations. The solid reflectance electronic spectra and IR spectra indicate that there is interaction between the alpha-H(4)SiW(12)O(40) and the organic substrate. The complex has no photosensitivity under irradiation of sunlight, but under the near-UV light result in a charge transfer by oxidation of the HMPA and the reduction of the polyoxometalate. Light yellow polyhedrons of the title compound crystallize from the aqueous solvent of acetonitrile and aqueous solution as the formula of alpha-H(4)SiW(12)O(40).4HMPA.2H(2)O in the monoclinic, space group P2(1). The unit cell has a = 12.791(3) Å, b = 22.103(6) Å, c = 15.532(4) Å, beta = 102.860(10) degrees, and Z = 2. From the bond-valence parameters, it was found that the four hydrogen atoms of the polyoxometalate were combined with the N atoms of the four HMPA respectively. The title compound shows a certain second-order and third-order nonlinear optical response of I(2)(omega) = 0.7I(2)(omega)(KDP) and chi((3)) = 2.63 x 10(-)(11) esu, respectively.
    Matched MeSH terms: Acetonitriles
  4. Fulltext Accelerated nucleophilic substitution reactions of dansyl chloride with aniline under ambient conditions via dual-tip reactive paper spray
    Sarih NM, Romero-Perez D, Bastani B, Rauytanapanit M, Boisdon C, Praneenararat T, et al.
    Sci Rep, 2020 12 09;10(1):21504.
    PMID: 33299034 DOI: 10.1038/s41598-020-78133-4
    Paper spray ionization (PSI) mass spectrometry (MS) is an emerging tool for ambient reaction monitoring via microdroplet reaction acceleration. PSI-MS was used to accelerate and monitor the time course of the reaction of dansyl chloride with aniline, in acetonitrile, to produce dansyl aniline. Three distinct PSI arrangements were explored in this study representing alternative approaches for sample loading and interaction; conventional single tip as well as two novel setups, a dual-tip and a co-axial arrangement were designed so as to limit any on-paper interaction between reagents. The effect on product abundance was investigated using these different paper configurations as it relates to the time course and distance of microdroplet travel. It was observed that product yield increases at a given distance and then decreases thereafter for all PSI configurations. The fluorescent property of the product (dansyl aniline) was used to visually inspect the reaction progress on the paper substrate during the spraying process. Amongst the variety of sample loading methods the novel dual-tip arrangement showed an increased product yield and microdroplet density, whilst avoiding any on-paper interaction between the reagents.
    Matched MeSH terms: Acetonitriles
  5. Analytical GC-FID Method for the Determination of Organic Solvents in Radiopharmaceuticals
    Hassan H, Othman MF, Zakaria ZA, Saad FFA, Abdul Razak HR
    Curr Radiopharm, 2021;14(2):131-144.
    PMID: 33115398 DOI: 10.2174/1874471013999201027215704
    BACKGROUND: Organic solvents play an indispensable role in most of the radiopharmaceutical production stages. It is almost impossible to remove them entirely in the final formulation of the product.

    OBJECTIVE: In this presented work, an analytical method by gas chromatography coupled with flame ionization detection (GC-FID) has been developed to determine organic solvents in radiopharmaceutical samples. The effect of injection holding time, temperature variation in the injection port, and the column temperature on the analysis time and resolution (R ≥ 1.5) of ethanol and acetonitrile was studied extensively.

    METHODS: The experimental conditions were optimized with the aid of further statistical analysis; thence, the proposed method was validated following the International Council for Harmonisation (ICH) Q2 (R1) guideline.

    RESULTS: The proposed analytical method surpassed the acceptance criteria including the linearity > 0.990 (correlation coefficient of R2), precision < 2%, LOD, and LOQ, accuracy > 90% for all solvents. The separation between ethanol and acetonitrile was acceptable with a resolution R > 1.5. Further statistical analysis of Oneway ANOVA revealed that the increment in injection holding time and variation of temperature at the injection port did not significantly affect the analysis time. Nevertheless, the variation in injection port temperature substantially influenced the resolution of ethanol and acetonitrile peaks (p < 0.05).

    CONCLUSION: The proposed analytical method has been successfully implemented to determine the organic solvent in the [18F]fluoro-ethyl-tyrosine ([18F]FET), [18F]fluoromisonidazole ([18F]FMISO), and [18F]fluorothymidine ([18F]FLT).

    Matched MeSH terms: Acetonitriles/analysis; Acetonitriles/chemistry
  6. Simple high-performance liquid chromatographic method for simultaneous determination of fusidic Acid and betamethasone dipropionate in a cream formulation
    Peh KK, Tan YT
    Int J Pharm Compd, 2000 May-Jun;4(3):229-31.
    PMID: 23986007
    A simple and selective high-performance liquid chromatography (HPLC) method using ultraviolet detection was developed for simultaneous determination of fusidic acid and betamethasone dipropionate in a cream formulation. A Supelcosil LC18 column was used for chromatographic separation. The mobile phase consisted of acetonitrile and 0.01 M disodium hydrogen orthophosphate (70:30, % v/v) adjusted to pH 6 with glacial acetic acid. Analysis was run at a flow rate of 1.0 mL/minute with the detector operating at 235 nm. The standard calibration curve was linear over a concentration range of 0.3 to 1.2 mg/mL for fusidic acid and 9.6 to 38.4 micrograms/mL for betamethasone dipropionate. The average recovery values for fusidic acid and betamethasone dipropionate were almost 100%. The within-run and between-run coefficient of variation and percent error values for the two drugs were all less than 2% and +/- 3%, respectively.
    Matched MeSH terms: Acetonitriles
  7. Fulltext Silver (I) Dicyanonitrosomethanide, Ag[ONC(CN)2] Complex as Catalyst for the Selective Oxidation of Styrene to Benzaldehyde
    Mohammad Anwar Mohamed Iqbal, Muhammad Zulhelmi Nazri, Mohammad Norazmi Ahmad, Erna Normaya Abdullah, Umie Fatihah Mohamad Haziz, Mohd Rizal Razali, et al.
    Science Letters, 2020;14(2):71-84.
    MyJurnal
    Silver (I) dicyanonitrosomethanide, Ag[ONC(CN)2] represent a 3D interwoven coordination polymer organization in which all the donor atoms of the functional groups of ONC(CN)2- are coordinated to the Ag(I). Oxidation of styrene utilizing H2O2 as an oxidant in acetonitrile (CH3CN) was used as a model reaction to investigate the catalytic potential of the Ag (I) complex. The CH3CN was chosen as the solvent based on the data collected from Conductor like Screening Model for Real Solvents (COSMO-RS) study. The data indicate that the Ag [ONC(CN)2] complex was compatible and soluble in CH3CN. Different parameters such as styrene:H2O2 molar ratio, reaction time, catalyst mass, and reaction temperature were studied. Highest styrene conversion (36%) with 100% selectivity towards benzaldehyde (BZ) was achieved when 25 mg catalyst, 1:1 styrene to H2O2 molar ratio were used. The reaction was carried out at 303 K for 3 h. The catalytic conversion of styrene to BZ is proposed to take place via [Ag-H2O2] adduct with styrene oxide (StO) as an intermediate. Molecular Electrostatic Potential (MEP) shows that the Ag atom has the highest probability to coordinate with the oxygen atom of H2O2. The MEP data confirms the proposed mechanism.
    Matched MeSH terms: Acetonitriles
  8. Fulltext Bioethanol production from agarophyte red seaweed, Gelidium elegans, using a novel sample preparation method for analysing bioethanol content by gas chromatography
    Hessami MJ, Cheng SF, Ambati RR, Yin YH, Phang SM
    3 Biotech, 2019 Jan;9(1):25.
    PMID: 30622863 DOI: 10.1007/s13205-018-1549-8
    In this study, Gelidium elegans is investigated for ethanol production. A combination of factors including different temperatures, acid concentration and incubation time was evaluated to determine the suitable saccharification conditions. The combination of 2.5% (w/v) H2SO4 at 120 °C for 40 min was selected for hydrolysis of the seaweed biomass, followed by purification, and fermentation to yield ethanol. The galactose and glucose were dominant reducing sugars in the G. elegans hydrolysate and under optimum condition of dilute acid hydrolysis, 39.42% of reducing sugars was produced and fermentation resulted in ethanol concentration of 13.27 ± 0.47 g/L. A modified method was evaluated for sample preparation for gas chromatography (GC) analysis of the ethanol content. A solvent mixture of acetonitrile and iso-butanol precipitated dissolved organic residues and reduced water content in GC samples at least by 90%. Results showed that this method could be successfully used for bioethanol production from seaweed.
    Matched MeSH terms: Acetonitriles
  9. Fulltext Pressurized Liquid Extraction of Polycyclic Aromatic Hydrocarbons from soil samples
    Noorashikin Md Saleh, Sanagi, M. Marsin
    Pertanika Journal of Science & Technology, 2011;19(1):25-32.
    MyJurnal
    A Pressurized Liquid Extraction (PLE) method was developed by using conventional High Performance
    Liquid Chromatography (HPLC). It was found that all of the PAHs have been successfully extracted with dichloromethane-acetone with high percentage recovery. A high temperature of 180°C gave the highest recovery for fluoranthene (94.4%). Meanwhile, fluorene showed the highest recovery at 150 bar, with 94.6% recovery. It is noted that there is no significant day-to-day difference in the efficiency of the developed method, with the R.S.D. values averaging at 0.02. The optimized conditions applied to the soil samples were analysed using the High Temperature High Performance Liquid Chromatography (HT-HPLC) with chromatographic conditions: Octadecylsilyl-silica (ODSsilica) column (100 mm × 4.6 mm I.D.); mobile phase acetonitrile:water 40:60 (v/v); flow rate 2.5 mL/min; temperature 70°C; UV absorbance 254 nm; injection volume 5µL.
    Matched MeSH terms: Acetonitriles
  10. Synthesis of some new 2-[4-(2-furoyl)-1-piperazinyl]-N-aryl/aralkyl acetamides as potent antibacterial agents
    Hussain G, Abbasi MA, Rehman A, Siddiqui SZ, Shah SAA, Ahmad I, et al.
    Pak J Pharm Sci, 2018 May;31(3):857-866.
    PMID: 29716866
    In this work, a new series of 2-[4-(2-furoyl)-1-piperazinyl]-N-aryl/aralkyl acetamides has been synthesized and evaluated for their antibacterial potential. The synthesis was initiated by the reaction of different aryl/aralkyl amines (1a-u) with 2-bromoacetylbromide (2) to obtain N-aryl/aralkyl-2-bromoacetamides (3a-u). Equimolar quantities of different N-aryl/aralkyl-2-bromoacetamides (3a-u) and 2-furoyl-1-piperazine (4) was allowed to react in acetonitrile and in the presence of K2CO3, to form 2-[4-(2-furoyl)-1-piperazinyl]-N-aryl/aralkyl acetamides (5a-u). The structural elucidation was done by EI-MS, IR and 1H-NMR techniques of all the synthesized compounds. All of the synthesized molecules were active against various Gram positive and Gram negative bacterial strains. Among them 5o and 5c showed very excellent MIC values. The cytotoxicity of the molecules was also checked to find their utility as possible therapeutic agents, where 5c (0.51%) and 5g (1.32%) are found to be least toxic in the series.
    Matched MeSH terms: Acetonitriles
  11. Fulltext Formulation of chelating agent with surfactant in cloud point extraction of methylphenol in water
    Hazrina HZ, Noorashikin MS, Beh SY, Loh SH, Zain NNM
    R Soc Open Sci, 2018 Jul;5(7):180070.
    PMID: 30109066 DOI: 10.1098/rsos.180070
    Cloud point extraction (CPE) is a separation and preconcentration of non-ionic surfactant from one liquid phase to another. In this study, Sylgard 309 and three different types of additives for CPE, namely CPE-Sylgard, CPE-Sylgard-BMIMBr and CPE-Sylgard-GLDA, are investigated to extract methylphenol from water samples. The methylphenols are well separated by reversed-phase high-performance liquid chromatography (HPLC) with isocratic elution of acetonitrile : water; 60 : 40 (v/v) and detection at 260 nm. The optimized parameters for the effect of salt, surfactant, temperature, time of extraction, pH, interference study and the performance of different additives on methylphenol extraction are investigated. CPE-Sylgard-GLDA is chosen because it gives us a high peak and good peak area compared with CPE-Sylgard and CPE-Sylgard-BMIMBr. The recovery extractions of CPE-Sylgard-GLDA are obtained in the range of 80-99% as the percentage of relative standard deviation (RSD) is less than 10. The LOD and LOQ are 0.05 ppm and 0.18 ppm, respectively. The method developed for CPE-Sylgard-GLDA coupled with HPLC is feasible for the determination of methylphenol because it is simple, effective, cheap, and produces a high percentage of recovery.
    Matched MeSH terms: Acetonitriles
  12. Fluorescence quenching reaction of chlorophyll a by tris(acetylacetonate)iron(iii) in various solvents
    Leesakul N, Masen D, Grampp G
    Sains Malaysiana, 2017;46:1369-1377.
    hlorophyll a is known as the prevailing light absorbing pigment giving a strong absorption and fluorescence emission in visible region. Quenching reactions of the chlorophyll a fluorescence by Fe(acac)3 were precisely investigated in various organic solvents which are benzene toluene, ethanol, methanol, dmf, dmso and acetonitrile. Electron transfer performance of chlorophyll a by Fe(acac)3 was investigated from oxidative quenching reaction. Herein, the simplified Rehm-Weller relationship was used to calculate the free energy change of the photo-induced electron transfer reaction. Emission intensity decreased when the concentration of Fe(acac)3 quencher was increased. Non-linear Stern-Volmer plots are found to be affected by inner filter effect more than the ground state complex formation. Rate of quenching reactions (kq) were determined from the Stern-Volmer equation with corrected inner filter effect. The rates of quenching reactions occurred faster in high viscous solvents.
    Matched MeSH terms: Acetonitriles
  13. Screening of nanoemulsion components for asenapine maleate using validated RP-HPLC method
    Kumbhar SA, Kokare CR, Shrivastava B, Gorain B
    Ann Pharm Fr, 2020 May 06.
    PMID: 32387177 DOI: 10.1016/j.pharma.2020.04.005
    A novel, simple reversed-phase high-performance liquid chromatographic (RP-HPLC) analytical method was developed and validated for the quantitative determination of asenapine from various nanoemulsion components during pre-formulation screening. The developed method was validated according to ICH Q2 (R1) guidelines. The developed and validated method was precisely and accurately quantified asenapine in various oils, surfactants and co-surfactants. The separation of asenapine was carried out on Hypersil BDS C18, 250×4.6mm, 5μm particle size column using methanol: acetonitrile (90:10) as mobile phase with a flow rate of 1mL.min-1. Measurement at 270nm for the concentration range of 5 to 50μg.mL-1 of the analyte was found to be linear with the determination coefficient (r2) of 0.999 as calculated by the least square regression method. The validated method was sensitive with LOD of 10.0ng.mL-1 and LOQ of 30.0ng.mL-1. Further, the method was precise and accurate, where the intraday and interday precision values were ranged from 0.70-0.95 and 0.36-0.95, respectively with the corresponding accuracy were ranged from 98.80-100.63 and 98.36-100.63. This developed and validated RP-HPLC method for asenapine was applied in the quantitative determination and screening of various oils, surfactants, and co-surfactants during the development of the asenapine maleate nanoemulsion.
    Matched MeSH terms: Acetonitriles
  14. Luminescent Cu4I4-Cu3(Pyrazolate)3Coordination Frameworks: Postsynthetic Ligand Substitution Leads to Network Displacement and Entanglement
    Zhan SZ, Li M, Zheng J, Wang QJ, Ng SW, Li D
    Inorg Chem, 2017 Nov 06;56(21):13446-13455.
    PMID: 29023107 DOI: 10.1021/acs.inorgchem.7b02144
    Six daughter complexes based on two-dimensional (2-D) luminescent Cu4I4-Cu3Pz3(Pz = pyrazolate) coordination networks, which exhibit an uncommon Cu4I4L3L' (L = pyridine; L' = acetonitrile, pyridine, pyrazine, 1,4-diazabicyclo[2.2.2]octane, triphenylphosphine, none) local configuration, were prepared through a postsynthetic modification method starting from a parent complex (L' = NH3). This work has successfully implemented the single-site substitution of Cu4I4-based coordination frameworks, which have rarely been reported for isolated Cu4I4-type compounds, by taking advantage of the solvent-assisted ligand substitution strategy recently developed in metal-organic framework (MOF) chemistry. Such a procedure not only resulted in the variation of local geometry in the Cu4I4units but also led to interlayer network displacement and entanglement. Particularly, an interesting topological transformation (from 2-D to 2-D → 3-D interpenetration) occurred when linear bidentate linkers (e.g., pyrazine and 1,4-diazabicyclo[2.2.2]octane) are inserted between the 2-D layers. Moreover, the variation in the L' sites can effectively tune the emission colors, ranging from green to orange (λemmax540-605 nm at room temperature). The photoluminescence origins are tentatively assigned to be a mixture of3MLCT and3XLCT, different from that of the well-studied isolated Cu4I4-type complexes.
    Matched MeSH terms: Acetonitriles
  15. Does cation break the cyano bond? A critical evaluation of nitrile-cation interaction
    Woi PM, Bakar MA, Rosli AN, Lee VS, Ahmad MR, Zain S, et al.
    J Mol Model, 2014 May;20(5):2219.
    PMID: 24770548 DOI: 10.1007/s00894-014-2219-3
    DFT and G4 results reveal that cations display the following trends in imparting its positive charge to acrylonitrile; H⁺ > Li⁺ > Na⁺ > K⁺ for group I and Be²⁺ > Mg²⁺ > Ca²⁺ for group II. Solvation by water molecules and interaction with cation make the cyano bond more polarized and exhibits ketene-imine character. Bond order in nitrile-cation complexes has been predicted based on the s character of the covalent bond orbitals. Mulliken, CHELPG, and NPA charges are in good agreement in predicting positive charge buildup and GIAO nuclear deshileding on C1. G4 enthalpies show that Mg²⁺ is more strongly bound to acrylonitrile than to acetonitrile by 3 kcal mol⁻¹, and the proton affinity of the former is higher by 0.8 kcal mol⁻¹. G4 enthalpies of reductions support prior experimental observation that metalated conjugated nitriles show enhanced reactivity toward weak nucleophiles to afford Michael addition products.
    Matched MeSH terms: Acetonitriles/chemistry
  16. Biodegradation of cyanide by acetonitrile-induced cells of Rhodococcus sp. UKMP-5M
    Nallapan Maniyam M, Sjahrir F, Ibrahim AL, Cass AE
    J Gen Appl Microbiol, 2013;59(6):393-404.
    PMID: 24492598
    A Rhodococcus sp. UKMP-5M isolate was shown to detoxify cyanide successfully, suggesting the presence of an intrinsic property in the bacterium which required no prior cyanide exposure for induction of this property. However, in order to promote growth, Rhodococcus sp. UKMP-5M was fully acclimatized to cyanide after 7 successive subcultures in 0.1 mM KCN for 30 days. To further shorten the lag phase and simultaneously increase the tolerance towards higher cyanide concentrations, the bacterium was induced with various nitrile compounds sharing a similar degradatory pathway to cyanide. Acetonitrile emerged as the most favored inducer and the induced cells were able to degrade 0.1 mM KCN almost completely within 18 h. With the addition of subsequent aliquots of 0.1 mM KCN a shorter period for complete removal of cyanide was required, which proved to be advantageous economically. Both resting cells and crude enzyme of Rhodococcus sp. UKMP-5M were able to biodegrade cyanide to ammonia and formate without the formation of formamide, implying the identification of a simple hydrolytic cyanide degradation pathway involving the enzyme cyanidase. Further verification with SDS-PAGE revealed that the molecular weight of the active enzyme was estimated to be 38 kDa, which is consistent with previously reported cyanidases. Since the recent advancement in the application of biological methods in treating cyanide-bearing wastewater has been promising, the discovery of this new bacterium will add value by diversifying the existing microbial populations capable of cyanide detoxification.
    Matched MeSH terms: Acetonitriles/pharmacology
  17. A novel liquid/liquid extraction process composed of surfactant and acetonitrile for purification of polygalacturonase enzyme from Durio zibethinus
    Amid M, Manap Y, Azmira F, Hussin M, Sarker ZI
    J Chromatogr B Analyt Technol Biomed Life Sci, 2015 Jul 1;993-994:1-8.
    PMID: 25973865 DOI: 10.1016/j.jchromb.2015.04.034
    Polygalacturonase is one of the important enzymes used in various industries such as food, detergent, pharmaceutical, textile, pulp and paper. A novel liquid/liquid extraction process composed of surfactant and acetonitrile was employed for the first time to purify polygalacturonase from Durio zibethinus. The influences of different parameters such as type and concentration of surfactants, concentrations of acetonitrile and composition of surfactant/acetonitrile on partitioning behavior and recovery of polygalacturonase was investigated. Moreover, the effect of pH of system and crude load on purification fold and yield of purified polygalacturonase were studied. The results of the experiment indicated the polygalacturonase was partitioned into surfactant top rich phase with impurities being partitioned into acetonitrile bottom rich phase in the novel method of liquid/liquid process composed of 23% (w/w) Triton X-100 and 19% (w/w) acetonitrile, at 55.6% of TLL (tie line length) crude load of 25% (w/w) at pH 6.0. Recovery and recycling of components also was measured in each successive step of liquid/liquid extraction process. The enzyme was successfully recovered by the method with a high purification factor of 14.3 and yield of 97.3% while phase components were also recovered and recycled above 95%. This study demonstrated that the novel method of liquid/liquid extraction process can be used as an efficient and economical extraction method rather than the traditional methods of extraction for the purification and recovery of the valuable enzyme.
    Matched MeSH terms: Acetonitriles/chemistry
  18. Fulltext Thermodynamic study of the complexation of p-isopropylcalix[6]arene with Cs+ cation in dimethylsulfoxide-acetonitrile binary media
    Ahmadzadeh S, Kassim A, Rezayi M, Rounaghi GH
    Molecules, 2011 Sep 22;16(9):8130-42.
    PMID: 21941227 DOI: 10.3390/molecules16098130
    The complexation reactions between the macrocyclic ionophore, p-isopropylcalix[6]arene and Cs+ cation were studied in dimethylsulfoxide-acetonitrile (DMSO-AN) binary non-aqueous solvents at different temperatures using a conductometry method. The conductance data show that the stoichiometry of the (p-isopropylcalix[6]-arene·Cs)+ complex in all binary mixed solvents is 1:1. The stability of the complexes is affected by the composition of the binary solvent media and a non-linear behavior was observed for changes of log K(f) of the complex versus the composition of the binary mixed solvents. The thermodynamic parameters (DH°(c) and DS°(c)) for formation of (p-isopropyl-calix[6]arene·Cs)+ complex were obtained from temperature dependence of the stability constant and the obtained results show that the (p-isopropylcalix[6]arene·Cs)+ complex is enthalpy destabilized, but entropy stabilized, and the values of the mentioned parameters are affected strongly by the nature and composition of the binary mixed solvents.
    Matched MeSH terms: Acetonitriles/chemistry*
  19. Fulltext Ultraviolet-visible study on acid-base equilibria of aporphine alkaloids with antiplasmodial and antioxidant activities from Alseodaphne corneri and Dehaasia longipedicellata
    Zahari A, Ablat A, Omer N, Nafiah MA, Sivasothy Y, Mohamad J, et al.
    Sci Rep, 2016;6:21517.
    PMID: 26898753 DOI: 10.1038/srep21517
    The UV-vis spectra of isocorydine 1, norisocorydine 2 and boldine 3 were studied in 2% v/v acetonitrile, at constant ionic strength (0.1 M NaCl, 35 degree Celsius). The pK(a) values of isocorydine 1 and norisocorydine 2 were 11.75 and 12.07, respectively. Boldine 3 gave a pK(a) value of 9.16 and 10.44. All of the alkaloids 1-3 were stable at physiological pH; thereby all of them will not ionize, thus permitting the basic nitrogen to be protonated and accumulated within the acidic food vacuole of Plasmodium via pH trapping. Subsequently, acidic food vacuoles that have been neutralized by alkaloids would result in enhancement of the antiplasmodial activity. The alkaloids showed antiplasmodial activity against Plasmodium falciparum and antioxidant activities; DPPH radical scavenging, metal chelating and ferric reducing power. The antioxidant properties of the alkaloids under investigation revealed that in addition to the antiplasmodial activity, the alkaloids can also prevent oxidative damage. It can be prevented by binding free heme and neutralizing the electrons produced during the Plasmodium falciparum mediated haemoglobin destruction in the host. Slightly basic properties of the aforementioned alkaloids, along with their antioxidant activities, are advantageous in improving the suppression of malaria infection that cause less damage to the host.
    Matched MeSH terms: Acetonitriles
  20. Simple and rapid LC-MS/MS method for simultaneous determination of flavoxate and 3-methyl-flavone-8-carboxylic acid in human plasma: Application to a bioequivalence study
    Loh GOK, Wong EYL, Tan YTF, Wee HC, Ng RS, Lee CY, et al.
    J Pharm Biomed Anal, 2021 Feb 05;194:113758.
    PMID: 33248861 DOI: 10.1016/j.jpba.2020.113758
    A simple, rapid, sensitive, and reproducible LC-MS/MS method was developed for simultaneous quantification of flavoxate and 3-methyl-flavone-8-carboxylic (MFCA) in human plasma, using diphenhydramine HCl as internal standard (IS). The chromatographic separation was achieved using Agilent Poroshell 120 EC-C18 - Fast LC column (100 × 2.1mmID, 2.7 μm) fitted with UHPLC Guard Poroshell 120 EC-C18 (5 × 2.1 mmID, 2.7 μm). The mobile phase consisted of 0.1 % v/v formic acid and acetonitrile (30:70, v/v) run at a flow rate of 0.40 mL/min. The standard calibration curve was linear over the concentration range of 2.00 - 2,000.31 ng/mL and 240.00 - 24,000.04 ng/mL for flavoxate and MFCA. For flavoxate and MFCA, the within-run precision was 0.81-6.67 % and 1.68-4.37 %, while accuracy was 100.21-108.25 % and 103.99-110.28 %. The between-run precision was 2.01-9.14 % and 2.31-11.11 %, and accuracy was 96.09-103.33 % and 102.37-109.52 %. The extended run precision was 7.78-11.04 % and 2.22-3.33 %, while accuracy was 100.72-101.88 % and 102.34-105.60 %. Flavoxate and MFCA in plasma were stable 4 h at bench top (short term), 24 h in autosampler and instrumentation room (post-preparative), after 7 freeze-thaw cycles, and 89 days in the freezer. Both analytes and IS stock solutions were stable for 31 days when kept at room temperature (25 ± 4 °C) and refrigerated (2-8 °C). The validated method was successfully applied to a bioequivalence study of two flavoxate formulations involving 24 healthy volunteers.
    Matched MeSH terms: Acetonitriles
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links