Displaying publications 1 - 20 of 56 in total

Abstract:
Sort:
  1. Development and evaluation of omeprazole pellets fabricated by sieving-spheronization and extrusion - spheronization process
    Karim S, Baie SH, Hay YK, Bukhari NI
    Pak J Pharm Sci, 2014 May;27(3):425-38.
    PMID: 24811797
    Pelletized dosage forms can be prepared by different methods which, in general, are time consuming and labor intensive. The current study was carried out to investigate the feasibility of preparing the spherical pellets of omeprazole by sieving-spheronization. An optimized formulation was also prepared by extrusion-spheronization process to compare the physical parameters between these two methods. The omeprazole pellets were consisted of microcrystalline cellulose, polyvinylpyrrolidone K 30, sodium lauryl sulphate and polyethylene glycol 6000. The omeprazole delay release system was developed by coating the prepared pellets with aqueous dispersion of Kollicoat 30 DP. The moisture content, spheronization speed and residence time found to influence the final properties of omeprazole pellets prepared by extrusion-spheronization and sieving-spheronization. The Mann-Whitney test revealed that both methods produced closely similar characteristics of the pellets in terms of, friability (p=0.553), flowability (p=0.677), hardness (p=0.103) and density (bulk, p=0.514, tapped, p=0.149) except particle size distribution (p=0.004). The percent drug release from the coated formulation prepared by sieving-spheronization and extrusion spheronization was observed to be 84.12 ± 1.10% and 82.67 ± 0.96%, respectively. Dissolution profiles of both formulations were similar as indicated by values of f1 and f2, 1.52 and 89.38, respectively. The coated formulation prepared by sieving-spheronization and commercial reference product, Zimore ® also showed similar dissolution profiles (f1=1.22, f2=91.52). The pellets could be prepared using sieving-spheronization. The process is simple, easy, less time- and labor-consuming and economical as compared to extrusion-spheronization process.
    Matched MeSH terms: Drug Compounding/methods*
  2. Tableting Properties and Compression Models of Labisia pumila Tablets
    Etti CJ, Yusof YA, Chin NL, Mohd Tahir S
    J Diet Suppl, 2017 Mar 04;14(2):132-145.
    PMID: 27487244
    The tableting properties of Labisia pumila herbal powder, which is well known for its therapeutic benefits was investigated. The herbal powder was compressed into tablets using a stainless steel cylindrical uniaxial die of 13-mm- diameter with compaction pressures ranging from 7 to 25 MPa. Two feed weights, 0.5 and 1.0 g were used to form tablets. Some empirical models were used to describe the compressibility behavior of Labisia pumila tablets. The strength and density of tablets increased with increase in compaction pressure and resulted in reduction in porosity of the tablets. Smaller feeds, higher forces and increase in compaction pressure, contributed to more coherent tablets. These findings can be used to enhance the approach and understanding of tableting properties of Labisia pumila herbal powder tablets.
    Matched MeSH terms: Drug Compounding/methods*
  3. Fulltext Functionality of wet-granulated disintegrant in comparison to directly incorporated disintegrant in a poorly water-soluble tablet matrix
    Veronica N, Lee ESM, Heng PWS, Liew CV
    Int J Pharm, 2024 Aug 15;661:124467.
    PMID: 39004293 DOI: 10.1016/j.ijpharm.2024.124467
    Tablet disintegration is crucial for drug release and subsequent systemic absorption. Although factors affecting the disintegrant's functionality have been extensively studied, the impact of wet granulation on the performance of disintegrants in a poorly water-soluble matrix has received much less attention. In this study, the disintegrants, crospovidone (XPVP), croscarmellose sodium (CCS) and sodium starch glycolate (SSG), were wet-granulated with dibasic calcium phosphate dihydrate as the poorly water-soluble matrix and polyvinylpyrrolidone as the binder. The effect of wet granulation was studied by evaluating tablet tensile strength and disintegratability. Comparison between tablets with granulated or ungranulated disintegrants as well those without disintegrants were also made. Different formulations showed different degrees of sensitivity to changes in tablet tensile strength and disintegratability post-wet granulation. Tablet tensile strength decreased for tablets with granulated disintegrant XPVP or CCS, but to a smaller extent for SSG. While tablets with granulated XPVP or CCS had increased disintegration time, the increment was lesser than for SSG, suggesting that wet granulation impacted a swelling disintegrant more. The findings showed that tablets with wet-granulated disintegrant had altered the disintegrant's functionality. These findings could provide better insights into changes in the disintegrant's functionality after wet granulation.
    Matched MeSH terms: Drug Compounding/methods
  4. Development of a novel direct compressible co-processed excipient and its application for formulation of Mirtazapine orally disintegrating tablets
    Loke YH, Chew YL, Janakiraman AK, Lee SK, Uddin ABMH, Goh CF, et al.
    Drug Dev Ind Pharm, 2024 Jan;50(1):36-44.
    PMID: 38149637 DOI: 10.1080/03639045.2023.2294095
    INTRODUCTION: Orally disintegrating tablets (ODTs) are designed to dissolve in the oral cavity within 3 min, providing a convenient option for patients as they can be taken without water. Direct compression is the most common method used for ODTs formulations. However, the availability of single composite excipients with desirable characteristics such as good compressibility, fast disintegration, and a good mouthfeel suitable for direct compression is limited.

    OBJECTIVE: This research was proposed to develop a co-processed excipient composed of xylitol, mannitol, and microcrystalline cellulose for the formulation of ODTs.

    METHODS: A total of 11 formulations of co-processed excipients with different ratios of ingredients were prepared, which were then compressed into ODTs, and their characteristics were thoroughly examined. The primary focus was on evaluating the disintegration time and hardness of the tablets, as these factors are important in ensuring the ODTs meet the desired criteria. The model drug, Mirtazapine was then incorporated into the chosen optimized formulation.

    RESULTS: The results showed that the formulation comprised of 10% xylitol, 10% mannitol and 80% microcrystalline cellulose demonstrated the fastest disintegration time (1.77 ± 0.119 min) and sufficient hardness (3.521 ± 0.143 kg) compared to the other formulations. Furthermore, the drug was uniformly distributed within the tablets and fully released within 15 min.

    CONCLUSION: Therefore, the developed co-processed excipients show great potential in enhancing the functionalities of ODTs, offering a promising solution to improve the overall performance and usability of ODTs in various therapeutic applications.

    Matched MeSH terms: Drug Compounding/methods
  5. Recent advancements in xanthan gum-based gastroretentive floating formulations: Chemical modification, production and applications
    Bhardwaj BY, Vihal S, Pahwa R, Agarwal S, Gupta B, Yang JC, et al.
    Carbohydr Polym, 2025 Jan 15;348(Pt A):122809.
    PMID: 39562084 DOI: 10.1016/j.carbpol.2024.122809
    Non-toxic, biocompatible, biodegradable, and bioadhesive, characteristics, of natural polysaccharides, are widely recognized and well accepted. Their usage in dietary, medicinal, biomedical, and cosmetic, applications is due to their unique and fascinating attributes. Xanthan gum, a microbial polysaccharide possesses diverse-wonderful features. It is a naturally occurring heteropolysaccharide, with large molecular weight, derived from the Gram-negative bacteria, Xanthomonas Campestris. This biopolymer has been studied extensively as a matrix for tablets, nanoparticles, microparticles, hydrogels, and various other formulation types. However, indigenous xanthan gum has its own set of restrictions, which may be overcome by chemical modification, to fine-tune the characteristics of the native gum, for attaining unmet demands. This approach has huge potential in the drug delivery and numerous other promising applications. The objective of this review is to provide a consolidated source of information on xanthan gum-based gastroretentive systems. Several approaches of floating techniques, with recent research avenues and patents, utilizing the natural polysaccharide xanthan gum is also discussed.
    Matched MeSH terms: Drug Compounding/methods
  6. In Vitro and In Vivo Characterisation of Lactiplantibacillus plantarum LAB12 in Pea Protein-Alginate Microcapsules
    Ismail MF, Lim SM, Lim FT, Ramasamy K
    Probiotics Antimicrob Proteins, 2025 Apr;17(2):569-587.
    PMID: 37816988 DOI: 10.1007/s12602-023-10171-6
    The susceptibility of probiotics to high temperature and low pH remains a major challenge in food industries. Numerous commercially available probiotic products were reportedly presented with lower probiotic viability than claimed. To confer health benefits to the host, it is essential that probiotic strain remains viable at optimal amount during food processing procedures, storage and passage through the gastrointestinal tract. This study addressed these issues by immobilising Lactiplantibacillus plantarum LAB12 isolated from tempeh (fermented soybean) in a polymeric matrix made up of alginate (Alg, 0.5% w/v) and denatured pea protein isolate (PPi, 1-10% w/v) using the emulsion/acidification technique. Alg supplemented with 10% PPi (Alg-PPi10) appeared to be optimally small ( 9 log CFU g-1) in simulated intestinal fluid (at pH 6.8 for 240 min). Whilst retaining their intrinsic cholesterol lowering effect, microencapsulation conferred additional advantages to L. plantarum LAB12 in terms of lowering serum triglyceride and increasing HDL cholesterol in zebrafish fed with high-cholesterol diet (HCD). Overall, our findings strongly imply the potential use of Alg-PPi10 as an effective medium that confers thermal protection and facilitates pH-sensitive release of cholesterol-reducing L. plantarum LAB12. This will allow the diverse applications L. plantarum LAB12 across health, food and agro-feed industries amongst others.
    Matched MeSH terms: Drug Compounding/methods
  7. Technical aspects of preparing PEG-PLGA nanoparticles as carrier for chemotherapeutic ‎agents by nanoprecipitation method
    Almoustafa HA, Alshawsh MA, Chik Z
    Int J Pharm, 2017 Nov 25;533(1):275-284.
    PMID: 28943210 DOI: 10.1016/j.ijpharm.2017.09.054
    Nanoprecipitation is a simple and increasingly trending method for nanoparticles preparation. The self-assembly feature of poly (ethylene glycol)-poly (lactide-co-glycolic acid) (PEG-PLGA) amphiphilic copolymer into a nanoparticle and its versatile structure makes nanoprecipitation one of the best methods for its preparation. The aim of this study is to review currently available literature for standard preparation of PEG-PLGA nanoparticles using nanoprecipitation technique in order to draw conclusive evidenceto draw conclusive evidence that can guide researchers during formulation development. To achieve this, three databases (Web of Science, Scopus and PubMed) were searched using relevant keywords and the extracted articles were reviewed based on defined inclusion and exclusion criteria. Data extraction and narrative analysis of the obtained literature was performed when appropriate, along with our laboratory observations to support those claims wherever necessary. As a result of this analysis, reports that matched our criteria conformed to the general facts about nanoprecipitation techniques such as simplicity in procedure, low surfactants requirement, narrow size distribution, and low resulting concentrations. However, these reports showed interesting advantages for using PEG-PLGA as they are frequently reported to be freeze-dried and active pharmaceutical ingredients (APIs) with low hydrophobicity were reported to successfully be encapsulated in the particles.
    Matched MeSH terms: Drug Compounding/methods*
  8. Comparison of Disintegrant-addition Methods on the Compounding of Orodispersible Tablets
    Mahesparan VA, Bin Abd Razak FS, Ming LC, Uddin AH, Sarker MZI, Bin LK
    Int J Pharm Compd, 2020 3 21;24(2):148-155.
    PMID: 32196477
    Orodispersible tablets disintegrate rapidly (within 3 minutes) in the oral cavity and release the medicament before swallowing. The mode of disintegrant addition might affect the properties of orodispersible tablets. The objective of this study was to formulate and evaluate orodispersible tablets by studying different modes of disintegration addition with varying concentrations of disintegrants. The wet granulation method was used to produce the orodispersible tablets. Two methods of disintegration addition were compared (i.e., intragranular, extragranular). Three disintegrants (i.e., cornstarch, sodium starch glycolate, crospovidone) were used at three levels (5%, 10%, and 15%) in the study. The formulations were tested for the powder flowability (angle of repose) and characterized physically (hardness, weight, thickness, friability, disintegration time). The mangosteen pericarp extract was used as a model active pharmaceutical ingredient to be incorporated into the optimum formulation. It was observed that the extragranular method produced granules with better flowability compared to that of the intragranular method. Crospovidone was found as the most efficient disintegrant among the three. The optimum formulation selected was one with the highest concentration of crospovidone (15%), which showed the fastest disintegration time. The mode of disintegrant addition into the orodispersible tablets formulation was found to show a marked difference in the disintegration, as well as other physical characteristics of the orodispersible tablets where the extragranular mode of addition showed better property, which caused the orodispersible tablets to disintegrate the fastest.
    Matched MeSH terms: Drug Compounding/methods*
  9. Understanding the Roles of Excipients in Moisture Management in Solid Dosage Forms
    Veronica N, Heng PWS, Liew CV
    Mol Pharm, 2024 May 06;21(5):2484-2500.
    PMID: 38647432 DOI: 10.1021/acs.molpharmaceut.4c00031
    Excipients are ubiquitous in pharmaceutical products, and often, they can also play a critical role in maintaining product quality. For a product containing a moisture-sensitive drug, moisture can be deleterious to the product stability during storage. Therefore, using excipients that interact with moisture in situ can potentially alleviate product stability issues. In this study, the interactive behavior of starch with moisture was augmented by coprocessing maize starch with sodium chloride (NaCl) or magnesium nitrate hexahydrate [Mg(NO3)2·6H2O] at different concentrations (5 and 10%, w/w). The effect of the formulation on drug stability was assessed through the degradation of acetylsalicylic acid, which was used as the model drug. The results showed that coprocessing of the starch with either NaCl or Mg(NO3)2·6H2O impacted the number of water molecule binding sites on the starch and how the sorbed moisture was distributed. The coprocessed excipients also resulted in lower drug degradation and lesser changes in tablet tensile strength during post-compaction storage. However, corresponding tablet formulations containing physical mixtures of starch and salts did not yield promising outcomes. This study demonstrated the advantageous concomitant use of common excipients by coprocessing to synergistically mitigate the adverse effects of moisture and promote product stability when formulating a moisture-sensitive drug. In addition, the findings could help to improve the understanding of moisture-excipient interactions and allow for the judicious choice of excipients when designing formulations containing moisture-sensitive drugs.
    Matched MeSH terms: Drug Compounding/methods
  10. Fulltext Application of supercritical antisolvent method in drug encapsulation: a review
    Kalani M, Yunus R
    Int J Nanomedicine, 2011;6:1429-42.
    PMID: 21796245 DOI: 10.2147/IJN.S19021
    The review focuses on the application of supercritical fluids as antisolvents in the pharmaceutical field and demonstrates the supercritical antisolvent method in the use of drug encapsulation. The main factors for choosing the solvent and biodegradable polymer to produce fine particles to ensure effective drug delivery are emphasized and the effect of polymer structure on drug encapsulation is illustrated. The review also demonstrates the drug release mechanism and polymeric controlled release system, and discusses the effects of the various conditions in the process, such as pressure, temperature, concentration, chemical compositions (organic solvents, drug, and biodegradable polymer), nozzle geometry, CO(2) flow rate, and the liquid phase flow rate on particle size and its distribution.
    Matched MeSH terms: Drug Compounding/methods*
  11. Phospholipid Complex Formulation Technology for Improved Drug Delivery in Oncological Settings: a Comprehensive Review
    Patil J, Pawde DM, Bhattacharya S, Srivastava S
    AAPS PharmSciTech, 2024 Apr 25;25(5):91.
    PMID: 38664316 DOI: 10.1208/s12249-024-02813-x
    Addressing poor solubility and permeability issues associated with synthetic drugs and naturally occurring active compounds is crucial for improving bioavailability. This review explores the potential of phospholipid complex formulation technology to overcome these challenges. Phospholipids, as endogenous molecules, offer a viable solution, with drugs complexed with phospholipids demonstrating a similar absorption mechanism. The non-toxic and biodegradable nature of the phospholipid complex positions it as an ideal candidate for drug delivery. This article provides a comprehensive exploration of the mechanisms underlying phospholipid complexes. Special emphasis is placed on the solvent evaporation method, with meticulous scrutiny of formulation aspects such as the phospholipid ratio to the drug and solvent. Characterization techniques are employed to understand structural and functional attributes. Highlighting the adaptability of the phospholipid complex, the review discusses the loading of various nanoformulations and emulsion systems. These strategies aim to enhance drug delivery and efficacy in various malignancies, including breast, liver, lung, cervical, and pancreatic cancers. The broader application of the drug phospholipid complex is showcased, emphasizing its adaptability in diverse oncological settings. The review not only explores the mechanisms and formulation aspects of phospholipid complexes but also provides an overview of key clinical studies and patents. These insights contribute to the intellectual and translational advancements in drug phospholipid complexes.
    Matched MeSH terms: Drug Compounding/methods
  12. Magnesium Stearate Fatty Acid Composition, Lubrication Performance and Tablet Properties
    Veronica N, Heng PWS, Liew CV
    AAPS PharmSciTech, 2024 Nov 05;25(8):262.
    PMID: 39500792 DOI: 10.1208/s12249-024-02980-x
    Magnesium stearate (MgSt) is a common tablet lubricant. As variations in MgSt properties are known to influence tablet attributes, the impact of MgSt fatty acid composition, particularly the significance of the stearate and palmitate contents, and its effects on tablet properties warrant further investigation. This study investigated the effect of MgSt with different stearate and palmitate contents but comparable physical properties (e.g. particle size, crystallinity, specific surface area and morphology) on lubrication performance and resulting tablet quality attributes, including mechanical strength, disintegratability and drug release. The influence of MgSt concentration and blending duration on the resulting tablet properties was also examined. Tablets produced using the lower stearate content MgSt had slightly higher tensile strength. The effect of MgSt stearate content was more apparent in the disintegration time and drug release, whereby MgSt of lower stearate content resulted in tablets with longer disintegration time and slower drug release. The lower stearate content also resulted in a lower lubrication performance, leading to a lesser reduction in tablet ejection force. As expected, a longer blending time of the tablet formulation blend with MgSt yielded tablets with reduced tensile strength, shorter disintegration time and slower drug release. Tablets with higher MgSt concentration showed a greater reduction in tensile strength, longer disintegration time and faster drug release. The study findings reinforced observations by other researchers and provided a better understanding of the fatty acid composition effects of MgSt on lubrication performance and the resulting tablet properties.
    Matched MeSH terms: Drug Compounding/methods
  13. Importance of right communication with healthcare providers and patients about the new levothyroxine formulation: an expert opinion from Asia Pacific Thyroid Advisory Board
    Razvi S, Nicodemus N, Ratnasingam J, Arundhati D, Soh WEA, Kunavisarut T, et al.
    Curr Med Res Opin, 2024 Sep;40(9):1533-1536.
    PMID: 39104288 DOI: 10.1080/03007995.2024.2378984
    Levothyroxine (LT4), being "narrow therapeutic index" drug, may lead to significant fluctuations in thyroid stimulating hormone (TSH) levels. Such fluctuations can result in clinically noteworthy disruptions in thyroid function and give rise to adverse clinical consequences. Consequently, regulatory standards for LT4 potency have been tightened, with the most stringent specifications requiring maintenance of potency within the range of 95-105% of the labeled dose throughout the entire shelf-life of the product. The LT4 new formulation with tightened specification adheres to these rigorous standards, demonstrating established bioequivalence to its older formulation while upholding an equivalent standard of safety and efficacy. Furthermore, the novel formulation exhibits enhanced stability and an extended shelf-life. Of paramount significance is its capacity to provide patients with accurate and consistent dosing, thereby effectively catering to their medical requirements. The primary objective of the Asia-Pacific advisory board meeting (held in June 2022 with endocrinologists, experts from India, Indonesia, Philippines, Thailand, Malaysia and Singapore) was to establish the importance of appropriate communication to HCPs, patients and other stakeholders regarding the LT4 new formulation. The aim of this brief review is to highlight the importance of communication with healthcare professionals that should focus on providing accurate information on the LT4 new formulation, emphasizing efficacy, safety, and bioequivalence with clear guidance and ensure that patients and clinicians are fully informed about any changes to medications such as LT4 to reduce the risk of unrelated adverse events being incorrectly attributed to the newer formulation.
    Matched MeSH terms: Drug Compounding/methods
  14. Microencapsulation using a novel wall material prepared via Maillard reaction-derived mung bean protein-peach gum conjugates to enhance stability and functionality of chia seed oil
    Siddiquy M, Al-Maqtari QA, Ghamry M, Othman N, Li J, Hlaing KSS, et al.
    Int J Biol Macromol, 2025 Apr;298:139959.
    PMID: 39824431 DOI: 10.1016/j.ijbiomac.2025.139959
    This study investigated the potential of Maillard reaction products (MRPs) derived from mung bean protein isolate (MBPI) and peach gum (PG) conjugates as wall materials for microencapsulating chia seed oil (CSO). Four formulations (MMRP1%-4%) were prepared using spray-drying and compared to a commercial sample (CMMRP). The MMRP4% formulation exhibited the highest encapsulation yield (91 %) and encapsulation efficiency (96 %), along with favorable physical properties, including a spherical shape and smooth surface. All formulation showed significantly greater stability during storage at 4 °C compared to 25 °C. After 30 days of storage, the MMRP4% formulation exhibited significantly higher oxidative stability, as evidenced by lowest peroxide values (0.3 and 0.24 mEq O2/kg CSO at 4 °C and 25 °C, respectively). Furthermore, the MMRP4% formulation displayed the slowest decrease in DPPH radical scavenging activity, reaching 6.6 % at 4 °C and 10.4 % at 25 °C after 30 days, compared to 14.2 % and 20.9 % for CMMRP samples, correspondingly. Molecular dynamics simulations confirmed the effectiveness of MRPs as encapsulants for CSO. Overall, the results suggest that CSO microencapsulated with MRPs of MBPI-PG can be a valuable addition to various food products for long-term storage.
    Matched MeSH terms: Drug Compounding/methods
  15. Swelling behaviour and controlled drug release from cross-linked κ-carrageenan/NaCMC hydrogel by diffusion mechanism
    Hezaveh H, Muhamad II, Noshadi I, Shu Fen L, Ngadi N
    J Microencapsul, 2012;29(4):368-79.
    PMID: 22309480 DOI: 10.3109/02652048.2011.651501
    We studied a model system of controlled drug release using beta-carotene and κ-carrageenan/NaCMC hydrogel as a drug and a device, respectively. Different concentrations of genipin were added to crosslink the beta-carotene loaded beads by using the dripping method. Results have shown that the cross-linked beads possess lower swelling ability in all pH conditions (pH 1.2 and 7.4), and swelling ratio decreases with increasing genipin concentration. Microstructure study shows that cross-linking has enhanced the stability and structure of the beads network. Determination of diffusion coefficient for the release of encapsulated beta-carotene indicates less diffusivity when beads are cross-linked. Swelling models using adaptive neuro fuzzy show that using genipin as a cross-linker in the kC/NaCMC hydrogels affects the transport mechanism. The model shows very good agreement with the experimental data that indicates that applying ANFIS modelling is an accurate, rapid and simple way to model in such a case for controlled release applications.
    Matched MeSH terms: Drug Compounding/methods*
  16. Fulltext Solubility of drugs in aqueous polymeric solution: effect of ovalbumin on microencapsulation process
    Aziz HA, Tan YT, Peh KK
    AAPS PharmSciTech, 2012 Mar;13(1):35-45.
    PMID: 22101965 DOI: 10.1208/s12249-011-9707-x
    Microencapsulation of water-soluble drugs using coacervation-phase separation method is very challenging, as these drugs partitioned into the aqueous polymeric solution, resulting in poor drug entrapment. For evaluating the effect of ovalbumin on the microencapsulation of drugs with different solubility, pseudoephedrine HCl, verapamil HCl, propranolol HCl, paracetamol, and curcuminoid were used. In addition, drug mixtures comprising of paracetamol and pseudoephedrine HCl were also studied. The morphology, encapsulation efficiency, particle size, and in vitro release profile were investigated. The results showed that the solubility of the drug determined the ratio of ovalbumin to be used for successful microencapsulation. The optimum ratios of drug, ovalbumin, and gelatin for water-soluble (pseudoephedrine HCl, verapamil HCl, and propranolol HCl), sparingly water-soluble (paracetamol), and water-insoluble (curcuminoid) drugs were found to be 1:1:2, 2:3:5, and 1:3:4. As for the drug mixture, the optimum ratio of drug, ovalbumin, and gelatin was 2:3:5. Encapsulated particles prepared at the optimum ratios showed high yield, drug loading, entrapment efficiency, and sustained release profiles. The solubility of drug affected the particle size of the encapsulated particle. Highly soluble drugs resulted in smaller particle size. In conclusion, addition of ovalbumin circumvented the partitioning effect, leading to the successful microencapsulation of water-soluble drugs.
    Matched MeSH terms: Drug Compounding/methods*
  17. Fulltext The influence of operational parameters and feed preparation in a convective batch ribbon powder mixer
    Yeow ST, Shahar A, Abdul Aziz N, Anuar MS, Yusof YA, Taip FS
    Drug Des Devel Ther, 2011;5:465-9.
    PMID: 22162640 DOI: 10.2147/DDDT.S25047
    To investigate the effect of feed preparation characteristics and operational parameters on mixing homogeneity in a convective batch ribbon mixer.
    Matched MeSH terms: Drug Compounding/methods*
  18. Fulltext Stability assessment of injectable castor oil-based nano-sized emulsion containing cationic droplets stabilized by poloxamer-chitosan emulsifier films
    Tamilvanan S, Kumar BA, Senthilkumar SR, Baskar R, Sekharan TR
    AAPS PharmSciTech, 2010 Jun;11(2):904-9.
    PMID: 20496017 DOI: 10.1208/s12249-010-9455-3
    The objectives of the present work were to prepare castor oil-based nano-sized emulsion containing cationic droplets stabilized by poloxamer-chitosan emulgator film and to assess the kinetic stability of the prepared cationic emulsion after subjecting it to thermal processing and freeze-thaw cycling. Presence of cryoprotectants (5%, w/w, sucrose +5%, w/w, sorbitol) improved the stability of emulsions to droplet aggregation during freeze-thaw cycling. After storing the emulsion at 4 degrees C, 25 degrees C, and 37 degrees C over a period of up to 6 months, no significant change was noted in mean diameter of the dispersed oil droplets. However, the emulsion stored at the highest temperature did show a progressive decrease in the pH and zeta potential values, whereas the emulsion kept at the lowest temperatures did not. This indicates that at 37 degrees C, free fatty acids were formed from the castor oil, and consequently, the liberated free fatty acids were responsible for the reduction in the emulsion pH and zeta potential values. Thus, the injectable castor oil-based nano-sized emulsion could be useful for incorporating various active pharmaceutical ingredients that are in size from small molecular drugs to large macromolecules such as oligonucleotides.
    Matched MeSH terms: Drug Compounding/methods
  19. Fulltext Development and evaluation of a novel modified-release pellet-based tablet system for the delivery of loratadine and pseudoephedrine hydrochloride as model drugs
    Zeeshan F, Bukhari NI
    AAPS PharmSciTech, 2010 Jun;11(2):910-6.
    PMID: 20496016 DOI: 10.1208/s12249-010-9456-2
    Modified-release multiple-unit tablets of loratadine and pseudoephedrine hydrochloride with different release profiles were prepared from the immediate-release pellets comprising the above two drugs and prolonged-release pellets containing only pseudoephedrine hydrochloride. The immediate-release pellets containing pseudoephedrine hydrochloride alone or in combination with loratadine were prepared using extrusion-spheronization method. The pellets of pseudoephedrine hydrochloride were coated to prolong the drug release up to 12 h. Both immediate- and prolonged-release pellets were filled into hard gelatin capsule and also compressed into tablets using inert tabletting granules of microcrystalline cellulose Ceolus KG-801. The in vitro drug dissolution study conducted using high-performance liquid chromatography method showed that both multiple-unit capsules and multiple-unit tablets released loratadine completely within a time period of 2 h, whereas the immediate-release portion of pseudoephedrine hydrochloride was liberated completely within the first 10 min of dissolution study. On the other hand, the release of pseudoephedrine hydrochloride from the prolonged release coated pellets was prolonged up to 12 hr and followed zero-order release kinetic. The drug dissolution profiles of multiple-unit tablets and multiple-unit capsules were found to be closely similar, indicating that the integrity of pellets remained unaffected during the compression process. Moreover, the friability, hardness, and disintegration time of multiple-unit tablets were found to be within BP specifications. In conclusion, modified-release pellet-based tablet system for the delivery of loratadine and pseudoephedrine hydrochloride was successfully developed and evaluated.
    Matched MeSH terms: Drug Compounding/methods
  20. Extraction and microencapsulation of khat: effects on sexual motivation and estradiol level in female rats
    Aziz HA, Peh KK, Tan YT
    J Sex Med, 2009 Mar;6(3):682-95.
    PMID: 19143913 DOI: 10.1111/j.1743-6109.2008.01157.x
    Khat (Catha edulis) is an evergreen tree/shrub that is thought to affect sexual motivation or libido. Its positive effect on sexual desire is more frequently observed in females than in males and occurs when khat is chewed. Thus, khat's effects on sexual behavior may depend on the release mode of its active constituent.
    Matched MeSH terms: Drug Compounding/methods*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links