MyMedR

Displaying all 15 publications

Abstract:

Sort:

Transformation of oil palm fronds into pentose sugars using copper (II) sulfate pentahydrate with the assistance of chemical additive

Loow YL, Wu TY

J Environ Manage, 2018 Jun 15;216:192-203.
PMID: 28545947 DOI: 10.1016/j.jenvman.2017.04.084

Among the chemical pretreatments available for pretreating biomass, the inorganic salt is considered to be a relatively new but simple reagent that offers comparable pentose (C5) sugar recoveries as the conventional dilute acid hydrolysis. This study investigated the effects of different concentrations (1.5-6.0% (v/v)) of H2O2 or Na2S2O8 in facilitating CuSO4·5H2O pretreatment for improving pentose sugar recovery from oil palm fronds. The best result was observed when 0.2 mol/L of CuSO4·5H2O was integrated with 4.5% (v/v) of Na2S2O8 to recover 8.2 and 0.9 g/L of monomeric xylose and arabinose, respectively in the liquid fraction. On the other hand, an addition of 1.5% (v/v) of H2O2 yielded approximately 74% lesser total pentose sugars as compared to using 4.5% (v/v) Na2S2O8. By using CuSO4·5H2O alone (control), only 0.8 and 1.0 g/L xylose and arabinose, respectively could be achieved. The results mirrored the importance of using chemical additives together with the inorganic salt pretreatment of oil palm fronds. Thus, an addition of 4.5% (v/v) of Na2S2O8 during CuSO4·5H2O pretreatment of oil palm fronds at 120 °C and 30 min was able to attain a total pentose sugar yield up to ∼40%.

Matched MeSH terms: Copper Sulfate*
Effects of copper overload on hepatic lipid peroxidation and antioxidant defense in rats

Zhang SS, Noordin MM, Rahman SO, Haron J

Vet Hum Toxicol, 2000 Oct;42(5):261-4.
PMID: 11003114

The influence of copper (Cu) overload on hepatic lipid peroxidation and antioxidation defense capacity was studied by overloading rats with copper sulphate orally (500 mg Cu/kg bw) 5 d/w for 8 w. Malondialdehyde (MDA), Cu-Zn superoxide dismutase (SOD), and Se-glutathione peroxidase (GSH-Px) were measured in serum and liver homogenate at 2, 4 and 8 w of dosing. Liver Cu concentration and alanine aminotransferase (ALT) activity were also determined. As Cu loading progressed, there were multiparameter changes with significant ALT elevation, increased MDA concentrations in serum and liver homogenate, and dramatic declines of SOD and GSH-Px activities in erythrocytes and whole blood respectively, along with marked elevation of hepatic Cu in the Cu-dosed group. Excessive Cu accumulation in the liver depressed SOD and GSH-Px activities and resulted in high MDA in serum and liver homogenate due to the lipid peroxidation induced by the Cu overload.

Matched MeSH terms: Copper Sulfate/administration & dosage; Copper Sulfate/toxicity*
Fulltext A one dimensional PAGE studies on Puntius javanicus liver proteome affected by copper toxicity

Mohd Khalizan Sabullah, Azlan Jualang Gansau, Mohd Rosni Sulaiman, Fisal Ahmad

Bioremediation Science and Technology Research, 2015;3(2):26-29.
MyJurnal

Observations on the effects of copper on the liver proteome of Puntius javanicus based on the
one dimensional PAGE was carried out. The liver was dissected from each fish, which was
separately treated with different concentrations of copper sulfate ranging from 0.1 to 5.0 mg/L.
The livers were extracted and one dimensional PAGE was performed under nonreducing
(native) and reducing (SDS)-PAGE. Several bands were resolved in the native PAGE with
probable candidates for the effect of copper observed showing an increased in the expression
and downregulation strongly associated with increasing copper concentrations. This study
showed that high concentrations of copper significantly alters P. javanicus liver at the proteome
level, and preliminary screening based on one dimensional PAGE is considered rapid and
simple to assess the toxicity effect of copper before more advanced and extensive assesment
with a second dimensional PAGE is carried out.

Matched MeSH terms: Copper Sulfate
Catalytic thermolysis in treating Cibacron Blue in aqueous solution: Kinetics and degradation pathway

Su CX, Teng TT, Wong YS, Morad N, Rafatullah M

Chemosphere, 2016 Mar;146:503-10.
PMID: 26741557 DOI: 10.1016/j.chemosphere.2015.12.048

A thermal degradation pathway of the decolourisation of Reactive Cibacron Blue F3GA (RCB) in aqueous solution through catalytic thermolysis is established. Catalytic thermolysis is suitable for the removal of dyes from wastewater as it breaks down the complex dye molecules instead of only transferring them into another phase. RCB is a reactive dye that consists of three main groups, namely anthraquinone, benzene and triazine groups. Through catalytic thermolysis, the bonds that hold the three groups together were effectively broken and at the same time, the complex molecules degraded to form simple molecules of lower molecular weight. The degradation pathway and products were characterized and determined through UV-Vis, FT-IR and GCMS analysis. RCB dye molecule was successfully broken down into simpler molecules, namely, benzene derivatives, amines and triazine. The addition of copper sulphate, CuSO4, as a catalyst, hastens the thermal degradation of RCB by aiding in the breakdown of large, complex molecules. At pH 2 and catalyst mass loading of 5 g/L, an optimum colour removal of 66.14% was observed. The degradation rate of RCB is well explained by first order kinetics model.

Matched MeSH terms: Copper Sulfate/chemistry
Degradation reaction of Diazo reactive black 5 dye with copper (II) sulfate catalyst in thermolysis treatment

Lau YY, Wong YS, Ang TZ, Ong SA, Lutpi NA, Ho LN

Environ Sci Pollut Res Int, 2018 Mar;25(7):7067-7075.
PMID: 29275478 DOI: 10.1007/s11356-017-1069-9

The theme of present research demonstrates performance of copper (II) sulfate (CuSO4) as catalyst in thermolysis process to treat reactive black 5 (RB 5) dye. During thermolysis without presence of catalyst, heat was converted to thermal energy to break the enthalpy of chemical structure bonding and only 31.62% of color removal. With CuSO4 support as auxiliary agent, the thermally cleaved molecular structure was further destabilized and reacted with CuSO4. Copper ions functioned to delocalize the coordination of π of the lone paired electron in azo bond, C=C bond of the sp2 carbon to form C-C of the sp3 amorphous carbon in benzene and naphthalene. Further, the radicals of unpaired electrons were stabilized and RB 5 was thermally decomposed to methyl group. Zeta potential measurement was carried out to analyze the mechanism of RB 5 degradation and measurement at 0 mV verified the critical chemical concentration (CCC) (0.7 g/L copper (II) sulfate), as the maximum 92.30% color removal. The presence of copper (II) sulfate catalyst has remarkably increase the RB 5 dye degradation as the degradation rate constant without catalyst, k1 is 6.5224 whereas the degradation rate constant with catalyst, k2 is 25.6810. This revealed the correlation of conversion of thermal energy from heat to break the chemical bond strength, subsequent fragmentation of RB 5 dye molecular mediated by copper (II) sulfate catalyst. The novel framework on thermolysis degradation of molecular structure of RB 5 with respect to the bond enthalpy and interfacial intermediates decomposition with catalyst reaction were determined.

Matched MeSH terms: Copper Sulfate/chemistry*
Toxic effects of copper on liver and cholinesterase of Clarias gariepinus

Padrilah SN, Ahmad SA, Yasid NA, Sabullah MK, Daud HM, Khalid A, et al.

Environ Sci Pollut Res Int, 2017 Oct;24(28):22510-22523.
PMID: 28804856 DOI: 10.1007/s11356-017-9923-3

The release of pollutants, especially heavy metals, into the aquatic environment is known to have detrimental effects on such an environment and on living organisms including humans when those pollutants are allowed to enter the food chain. The aim of this study is to analyse the damage to Clarias gariepinus' liver caused by exposure to different concentrations of copper. In the present study, samples of C. gariepinus were exposed to sub-lethal copper sulphate (CuSO4) concentrations (from 0.2 to 20.0 mg/L) for 96 h. Physiological and behavioural alterations were observed with respect to their swimming pattern, mucus secretion and skin colour. Mortality was also observed at high concentrations of copper. Histopathological alterations of the liver were analysed under light, transmission and scanning electron microscopies. The liver of the untreated group showed normal tissue structures, while histopathological abnormalities were observed in the treated fish under light and electron microscopes with increased copper concentrations. Histopathological abnormalities include necrosis, melanomacrophage, hepatic fibrosis and congested blood vessels. In addition, the enzyme activity of liver cholinesterase (ChE) was also found to be affected by copper sulphate, as 100% of cholinesterase activity was inhibited at 20.0 mg/L. Thus, liver enzyme activity and histopathological changes are proven to be alternative sources for biomarkers of metal toxicity.

Matched MeSH terms: Copper Sulfate/toxicity*
On the sensitivity of some common metallographic reagents to restoring obliterated marks on medium carbon (0.31% C) steel surfaces

Yin SH, Kuppuswamy R

Forensic Sci Int, 2009 Jan 10;183(1-3):50-3.
PMID: 19041202 DOI: 10.1016/j.forsciint.2008.10.009

Chemical etching, which is the most sensitive method to recover obliterated serial numbers on metal surfaces, has been practised quite successfully in forensic science laboratories all over the world. A large number of etchants suitable for particular metal surfaces based on empirical studies is available in the literature. This article reviews the sensitivity and efficacy of some popular etchants for recovering obliterated marks on medium carbon steel (0.31% C with ferrite-pearlite microstructure) used in automobile parts. The experiments involved engraving these carbon steel plates with some alphanumeric characters using a computer controlled machine "Gravograph" and erasing them to several depths below the bottom of their engraving depth. Seven metallographic reagents of which most of them were copper containing compounds were chosen for etching. The erased plates were etched with every one of these etchants using swabbing method. The results have revealed that Fry's reagent comprising cupric chloride 90 g, hydrochloric acid 120 mL and water 100mL provided the necessary contrast and was concluded to be the most sensitive. The same reagent was recommended by earlier workers for revealing strain lines in steel surfaces. Earlier, another reagent containing 5 g copper sulphate, 60 mL water, 30 mL (conc.) ammonium hydroxide, and 60 mL (conc.) hydrochloric acid was proved to be more sensitive to restore erased marks on low carbon steel (0.1% C with ferrite-pearlite structure) [M.A.M. Zaili, R. Kuppuswamy, H. Harun, Restoration of engraved marks on steel surfaces by etching technique, Forensic Sci. Int. 171 (2007) 27-32]. Thus the sensitivity of the etching reagent on steel surfaces appeared to be dependent on the content of carbon in the steel.

Matched MeSH terms: Copper Sulfate
Restoration of engraved marks on steel surfaces by etching technique

Zaili MA, Kuppuswamy R, Harun H

Forensic Sci Int, 2007 Aug 24;171(1):27-32.
PMID: 17088038

It is known that restoration of erased engraved identification marks on the engine and the chassis of a car or on a firearm has low success rate. Unlike stamping, engraving on a metal surface leaves no pronounced, permanent subsurface deformation in the crystalline structure, also called dislocation that can be revealed by suitable methods. Hence, the current research work investigated whether metallographic reagents used in the restoration of stamp (compression) marks could be applied to recover engraved marks on steel surfaces and also to establish the sensitivity and effectiveness of some of these reagents for the restoration of the marks. Experiments were conducted by mechanically engraving alphanumeric characters on several steel plates using a computer controlled engraving machine called Gravograph. The markings were later erased from the above steel plates by removing the metal in stages of 0.01 mm through 0.04 mm below the bottom of the engraving. Several plates were thus prepared wherein each one had been abraded to a specific depth. Then eight metallographic reagents were tested on each one of the above erased plates using a swabbing technique. The results had shown that while most of the reagents were able to restore marks up to certain levels of erasure, the reagent 5 g copper sulphate, 60 ml water, 30 ml concentrated ammonium hydroxide and 60 ml concentrated hydrochloric acid restored marks erased to a depth of 0.04 mm below the engraving depth, thus presenting itself the most sensitive reagent. Quite significantly, the above reagent was also able to decipher successfully the original engraved marks that had been erased and engraved with a new number, or obliterated by centre punching. The results of this research work should benefit the forensic practitioners engaged in the serial number recovery on vehicles, firearms and other objects.

Matched MeSH terms: Copper Sulfate
In vivo and in vitro effects on cholinesterase of blood of Oreochromis mossambicus by copper

Basirun AA, Ahmad SA, Sabullah MK, Yasid NA, Daud HM, Khalid A, et al.

3 Biotech, 2019 Feb;9(2):64.
PMID: 30729088 DOI: 10.1007/s13205-019-1592-0

The present study is aimed to evaluate the effects of sub-acute toxicity testing of copper sulphate (CuSO4), on behavioural, histological and biochemical changes of the Oreochromis mossambicus (black tilapia) blood tissues. The effects were assessed according to the previous results on sub-acute toxicity test after exposing fish to several concentrations (0.0, 2.5, 5.0, and 10.0 mg/L). The observations of scanning electron microscope, and transmission electron microscope studies revealed severe histopathological changes on the surface and the cellular changes in blood tissues, respectively. The morphological alterations in blood involved irregular structure of red blood cell and blood clot formation. CuSO4 affected the biochemical alteration of the blood cholinesterase also known as serum cholinesterase (ChE). Blood ChE inhibited up to 80% of activity when exposed to 10.0 mg/L CuSO4. The findings from this study can further improve the quality standards of aquaculture industry and the fundamental basis in selecting suitable strains among freshwater fish species to be used as bioindicator.

Matched MeSH terms: Copper Sulfate
Fulltext Electrospun polyurethane nanofibrous composite impregnated with metallic copper for wound-healing application

Jaganathan SK, Mani MP

3 Biotech, 2018 Aug;8(8):327.
PMID: 30073112 DOI: 10.1007/s13205-018-1356-2

In this study, a wound dressing based on polyurethane (PU) blended with copper sulphate nanofibers was developed using an electrospinning technique. The prepared PU and PU nanocomposites showed smooth fibers without any bead defects. The prepared nanocomposites showed smaller fiber (663 ± 156.30 nm) and pore (888 ± 70.93 nm) diameter compared to the pristine PU (fiber diameter 1159 ± 147.48 nm and pore diameter 1087 ± 62.51 nm). The interaction of PU with copper sulphate was evident in the infrared spectrum through hydrogen-bond formation. Thermal analysis displayed enhanced weight residue at higher temperature suggesting interaction of PU with copper sulphate. The contact angle measurements revealed the hydrophilic nature of the prepared nanocomposites (71° ± 2.309°) compared with pure PU (100° ± 0.5774°). The addition of copper sulphate into the PU matrix increased the surface roughness, as revealed in the atomic force microscopy (AFM) analysis. Mechanical testing demonstrated the enhanced tensile strength behavior of the fabricated nanocomposites (18.58 MPa) compared with the pristine PU (7.12 MPa). The coagulation assays indicated the enhanced blood compatibility of the developed nanocomposites [activated partial thromboplastin time (APTT)-179 ± 3.606 s and partial thromboplastin time (PT)-105 ± 2.646 s] by showing a prolonged blood clotting time compared with the pristine PU (APTT-147.7 ± 3.512 s and PT-84.67 ± 2.517 s). Furthermore, the hemolysis and cytotoxicity studies suggested a less toxicity nature of prepared nanocomposites by displaying low hemolytic index and enhanced cell viability rates compared with the PU membrane. It was observed that the fabricated novel wound dressing possesses better physicochemical and enhanced blood compatibility properties, and may be utilized for wound-healing applications.

Matched MeSH terms: Copper Sulfate
Fulltext Removal of hydrogen sulfide from a biogas mimic by using impregnated activated carbon adsorbent

Zulkefli NN, Masdar MS, Wan Isahak WNR, Md Jahim J, Md Rejab SA, Chien Lye C

PLoS One, 2019;14(2):e0211713.
PMID: 30753209 DOI: 10.1371/journal.pone.0211713

Adsorption technology has led to the development of promising techniques to purify biogas, i.e., biomethane or biohydrogen. Such techniques mainly depend on the adsorbent ability and operating parameters. This research focused on adsorption technology for upgrading biogas technique by developing a novel adsorbent. The commercial coconut shell activated carbon (CAC) and two types of gases (H2S/N2 and H2S/N2/CO2) were used. CAC was modified by copper sulfate (CuSO4), zinc acetate (ZnAc2), potassium hydroxide (KOH), potassium iodide (KI), and sodium carbonate (Na2CO3) on their surface to increase the selectivity of H2S removal. Commercial H2S adsorbents were soaked in 7 wt.% of impregnated solution for 30 min before drying at 120°C for 24 h. The synthesized adsorbent's physical and chemical properties, including surface morphology, porosity, and structures, were characterized by SEM-EDX, FTIR, XRD, TGA, and BET analyses. For real applications, the modified adsorbents were used in a real-time 0.85 L single-column adsorber unit. The operating parameters for the H2S adsorption in the adsorber unit varied in L/D ratio (0.5-2.5) and feed flow rate (1.5-5.5 L/min) where, also equivalent with a gas hourly space velocity, GHSV (212.4-780.0 hour-1) used. The performances of H2S adsorption were then compared with those of the best adsorbent that can be used for further investigation. Characterization results revealed that the impregnated solution homogeneously covered the adsorbent surface, morphology, and properties (i.e., crystallinity and surface area). BET analysis further shows that the modified adsorbents surface area decreased by up to 96%. Hence, ZnAc2-CAC clarify as the best adsorption capacity ranging within 1.3-1.7 mg H2S/g, whereby the studied extended to adsorption-desorption cycle.

Matched MeSH terms: Copper Sulfate
Kidney activity increases in copper exposed goldfish (Carassius auratus auratus)

Moyson S, Liew HJ, Fazio A, Van Dooren N, Delcroix A, Faggio C, et al.

Comp Biochem Physiol C Toxicol Pharmacol, 2016 Dec;190:32-37.
PMID: 27521798 DOI: 10.1016/j.cbpc.2016.08.003

In the present study, the effect of copper was examined in the common goldfish (Carassius auratus auratus). Fish were fasted and exposed to either a high (0.84μM), a low (0.34μM) or a control copper concentration (0.05μM) for 1 and 7days. Swimming performance was not affected by either fasting or copper exposure. Food deprivation alone had no effect on ionoregulation, but low plasma osmolality levels and plasma Na(+) were noticed in fasted fish exposed to Cu for 7days. Both gill Na(+)/K(+)-ATPase and H(+)-ATPase activities were undisturbed, while both kidney ATPase activities were up-regulated when challenged with the high Cu levels. Up-regulated kidney ATPase activities likely acted as compensatory strategy to enhance Na(+) reabsorption. However, this up-regulation was not sufficient to restore Na(+) to control levels in the highest exposure group.

Matched MeSH terms: Copper Sulfate/toxicity*
Antibacterial and anticancer potential of Brassica oleracea var acephala using biosynthesised copper nanoparticles

Sundaram CS, Kumar JS, Kumar SS, Ramesh PLN, Zin T, Rao USM

Med J Malaysia, 2020 11;75(6):677-684.
PMID: 33219177

INTRODUCTION: Brassica oleracea var acephala was studied for preliminary phytochemical screening. The results showed that the ethanolic crude extract of the leaf contain high phytochemical activity hence B.oleracea var acephala is rich in flavonoids, phenolic compounds, carbohydrates and phytosterols.
MATERIALS AND METHODS: The ethanolic extract was used to synthesise copper nanoparticles. The copper nanoparticles were successfully synthesised from copper sulphate solution which was identified by the colour change from dark green colour of the extract. Thus the B.oleracea var acephala is a good source to synthesis copper nanoparticles. The synthesised copper nanoparticles were characterised using Scanning Electron Microscope (SEM) analysis. The SEM image displayed the high-density nanoparticles synthesised by leaf extracts and that the nanoparticles were crystals in shape.
RESULTS: The copper nanoparticles (CNP) bind to the leaf extract. B.oleracea var acephala also has shown the antimicrobial and antioxidant activity. A comparative study was done between ethanolic its crude extract and nanoparticles. Both extracts exhibited zone of inhibition and better antioxidant potential but the CuNPs shows major zone of inhibition and showed more antioxidant activity. Anticancer activity of B.oleracea var acephala against Cervical HeLa cell line was confirmed using ethanolic crude extract and CNP. The results showed that HeLa cells proliferation was inhibited with increasing concentration of ethanolic crude extract and copper nanoparticles. From the results, it was seen that percentage viability of the cancer cells decreased with increased concentration of the samples whereas cytotoxicity against HeLa cell lines increased with the increased concentration of the samples.
CONCLUSION: Thus B.oleracea var acephala possesses anticancer activity against HeLa cell lines.

Matched MeSH terms: Copper Sulfate
Fulltext Electrospun Combination of Peppermint Oil and Copper Sulphate with Conducive Physico-Chemical properties for Wound Dressing Applications

Jaganathan SK, Mani MP, Khudzari AZM

Polymers (Basel), 2019 Apr 01;11(4).
PMID: 30960571 DOI: 10.3390/polym11040586

The ultimate goal in tissue engineering is to fabricate a scaffold which could mimic the native tissue structure. In this work, the physicochemical and biocompatibility properties of electrospun composites based on polyurethane (PU) with added pepper mint (PM) oil and copper sulphate (CuSO₄) were investigated. Field Emission Electron microscope (FESEM) study depicted the increase in mean fiber diameter for PU/PM and decrease in fiber diameter for PU/PM/CuSO₄ compared to the pristine PU. Fourier transform infrared spectroscopy (FTIR) analysis revealed the formation of a hydrogen bond for the fabricated composites as identified by an alteration in PU peak intensity. Contact angle analysis presented the hydrophobic nature of pristine PU and PU/PM while the PU/PM/CuSO₄ showed hydrophilic behavior. Atomic force microscopy (AFM) analysis revealed the increase in the surface roughness for the PU/PM while PU/PM/CuSO₄ showed a decrease in surface roughness compared to the pristine PU. Blood compatibility studies showed improved blood clotting time and less toxic behavior for the developed composites than the pristine PU. Finally, the cell viability of the fabricated composite was higher than the pristine PU as indicated in the MTS assay. Hence, the fabricated wound dressing composite based on PU with added PM and CuSO₄ rendered a better physicochemical and biocompatible nature, making it suitable for wound healing applications.

Matched MeSH terms: Copper Sulfate
Fulltext Evaluation of red blood cell indices related disorders among eligible blood donors at the Universiti Putra Malaysia (UPM)

Riahi S, Mei IL, Idris FB, George E, Noor SM

Southeast Asian J. Trop. Med. Public Health, 2015 Sep;46(5):911-7.
PMID: 26863862

Pre-donation screening declarations and hemoglobin (Hb) testing are measures used to determine the quality of donated blood. The copper sulphate (CuSo4) method used to screen for blood abnormalities can give inaccurate results if strict quality control is not applied. Blood donors who are carriers of thalassemia and those with mild iron deficiency anemia (IDA) are usually asymptomatic and frequently missed at blood donation. The aim of this study was to evaluate the red blood cell (RBC) indices related disorders among blood donors who were deemed qualified to donate blood after screening with CuSo4 method. One hundred fifty-eight volunteer blood donors at the Universiti Putra Malaysia (UPM), who had passed the CuSo4 screening method, were recruited for this study. Their bloods specimens were examined with a complete blood count. Subjects with a low mean corpuscular hemoglobin (MCH) level were examined further by checking a serum ferritin level, Hb quantification, and molecular analysis to examine for common RBC disorders. Fourteen point six percent of subjects had a low Hb level, two (1.3%) had IDA and four (2.5%) had thalassemia or some other hemoglobinopathy. Using a MCH level < 27 pg as a cut-off point, 58 subjects (36.7%) had suspected IDA, thalassemia or some other hemoglobinopathy. Eight point nine percent of subjects with a normal Hb level had thalassemia, and 3.8% had IDA. Malaysia has a high prevalence of thalassemia and other hemoglobinopathies. Pre-donation accurate screening is crucial to protect the quality of blood transfusion products. Public education regarding RBC disorders especially among blood donors is important.

Matched MeSH terms: Copper Sulfate

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links