MyMedR

Displaying publications 1 - 20 of 98 in total

Abstract:

Sort:

Reactive extraction of Jatropha curcas L. seed for production of biodiesel: process optimization study

Shuit SH, Lee KT, Kamaruddin AH, Yusup S

Environ Sci Technol, 2010 Jun 1;44(11):4361-7.
PMID: 20455588 DOI: 10.1021/es902608v

Biodiesel from Jatropha curcas L. seed is conventionally produced via a two-step method: extraction of oil and subsequent esterification/transesterification to fatty acid methyl esters (FAME), commonly known as biodiesel. Contrarily, in this study, a single step in situ extraction, esterification and transesterification (collectively known as reactive extraction) of J. curcas L. seed to biodiesel, was investigated and optimized. Design of experiments (DOE) was used to study the effect of various process parameters on the yield of FAME. The process parameters studied include reaction temperature (30-60 degrees C), methanol to seed ratio (5-20 mL/g), catalyst loading (5-30 wt %), and reaction time (1-24 h). The optimum reaction condition was then obtained by using response surface methodology (RSM) coupled with central composite design (CCD). Results showed that an optimum biodiesel yield of 98.1% can be obtained under the following reaction conditions: reaction temperature of 60 degrees C, methanol to seed ratio of 10.5 mL/g, 21.8 wt % of H(2)SO(4), and reaction period of 10 h.

Matched MeSH terms: Jatropha/embryology*
Desiccation sensitivity and cryopreservation of excised embryonic axes of Citrus suhuiensis cv. limau madu, Citrumelo [Citrus paradisi macf. × Poncirus trifoliata (l.) raf.] and Fortunella polyandra

Al Zoubi OM, Normah MN

Cryo Letters, 2012 May-Jun;33(3):241-51.
PMID: 22825791

Excised embryonic axes from seeds of three taxa, namely, Citrus suhuiensis cv. limau madu, Citrumelo (Citrus paradisi x Poncirus trifoliate) and Fortunella polyandra, were desiccated in a laminar airflow, over silica gel, and ultra-rapidly. Desiccation sensitivity (WC50) was estimated for each taxon using the quantal response model. High desiccation tolerance (WC50 = 0.11 g water per g dry mass. g/gdw) was observed for limau madu embryonic axes desiccated in a laminar airflow and ultra-rapidly (WC50 =0.10 g/gdw). Desiccation tolerance was substantially lower (WC50 = 0.19 g/gdw) for silica gel dehydration. Similarly, high desiccation tolerance (WC50 = 0.15 g/gdw) was associated with F. polyandra embryonic axes when desiccated in a laminar airflow, while a lower desiccation tolerance (WC50 = 0.17 g/gdw) was observed with silica gel dehydration. Ultra-rapid desiccation led to the highest desiccation tolerance (WC50 = 0.14 g/gdw). The dehydration rate, however, had no influence on desiccation tolerance (WC50 ~ 0.14 g/gdw) for Citrumelo embryonic axes. After each desiccation period, embryonic axes were directly immersed in liquid nitrogen (LN) followed by rapid rewarming. Normal seedling recovery of 80 to 83% for excised embryonic axes of limau madu was observed for laminar airflow and ultra-rapid dehydration, but for silica gel dehydration, 57% recovery was obtained. Similarly, for Citrumelo, high recoveries of 100% and 97% were obtained from axes desiccated in a laminar airflow and using ultra-rapid dehydration, respectively, whereas a lower value was associated with silica gel dehydration (80%). For F. polyandra, 50% recovery was obtained both for laminar airflow and ultra-rapid dehydration, while much lower recovery (43%) was associated with silica gel dehydration. Regardless of the drying method employed, axis survival percentages following exposure to LN were commensurate with the desiccation sensitivity pattern.

Matched MeSH terms: Citrus/embryology*; Seeds/embryology*; Rutaceae/embryology*; Poncirus/embryology*
Fulltext Seed yield of mungbean (Vigna radiata (L.) Wilczek) in relation to growth and developmental aspects

Mondal MM, Puteh AB, Malek MA, Ismail MR, Rafii MY, Latif MA

ScientificWorldJournal, 2012;2012:425168.
PMID: 22919319 DOI: 10.1100/2012/425168

Growth parameters such as leaf area (LA), total dry mass (TDM) production, crop growth rate (CGR), relative growth rate (RGR), and net assimilation rate (NAR) were compared in six varieties of mungbean under subtropical condition (24°8' N 90°0' E) to identify limiting growth characters for the efficient application of physiology breeding for higher yields. Results revealed that a relatively smaller portion of TDM was produced before flower initiation and the bulk of it after anthesis. The maximum CGR was observed during pod filling stage in all the varieties due to maximum leaf area (LA) development at this stage. Two plant characters such as LA and CGR contributed to the higher TDM production. Results indicated that high yielding mungbean varieties should possess larger LA, higher TDM production ability, superior CGR at all growth stages, and high relative growth rate and net assimilation rate at vegetative stage which would result in superior yield components.

Matched MeSH terms: Fabaceae/embryology*; Crops, Agricultural/embryology
Fulltext Plant regeneration and somatic embryogenesis from immature embryos derived through interspecific hybridization among different Carica species

Azad MA, Rabbani MG, Amin L

Int J Mol Sci, 2012;13(12):17065-76.
PMID: 23235330 DOI: 10.3390/ijms131217065

Plant regeneration and somatic embryogenesis through interspecific hybridization among different Carica species were studied for the development of a papaya ringspot virus-resistant variety. The maximum fruit sets were recorded from the cross of the native variety C. papaya cv. Shahi with the wild species C. cauliflora. The highest hybrid embryos were recorded at 90 days after pollination and the embryos were aborted at 150 days after pollination. The immature hybrid embryos were used for plant regeneration and somatic embryogenesis. The 90-day-old hybrid embryos from the cross of C. papaya cv. Shahi × C. cauliflora showed the highest percentage of germination, as well as plant regeneration on growth regulators free culture medium after 7 days pre-incubation on half-strength MS medium supplemented with 0.2 mg/L BAP, 0.5 mg/L NAA and 60 g/L sucrose. The 90-day-old hybrid embryos from the cross of C. papaya cv. Shahi × C. cauliflora produced maximum callus, as well as somatic embryos when cultured on half-strength MS medium containing 5 mg/L 2,4-D, 100 mg/L glutamine, 100 mg/L casein hydrolysate and 60 g/L sucrose. The somatic embryos were transferred into half-strength MS medium containing 0.5 mg/L BAP and 0.2 mg/L NAA and 60 g/L sucrose for maturation. The highest number of regenerated plants per hybrid embryo (10.33) was recorded from the cross of C. papaya cv. Shahi × C. cauliflora. Isoenzyme and dendrogram cluster analysis using UPGMA of the regenerated F(1) plantlets confirmed the presence of the hybrid plantlets.

Matched MeSH terms: Chimera/embryology*; Carica/embryology*
Does the cranial suspensory ligament have a role in cryptorchidism?

Kassim NM, Russell DA, Payne AP

Cells Tissues Organs (Print), 2010;191(4):307-15.
PMID: 19940435 DOI: 10.1159/000260062

The cranial suspensory ligament (CSL) is a fibromuscular structure anchoring the embryonic gonad to the posterior abdominal wall in male and female mammals. Its persistence in females is believed to be responsible for retaining the ovaries within the abdomen, while its regression in males permits testis descent. Embryonic loss of the CSL in males is believed to be an androgen-dependent event, and failure of this process has been proposed as a cause of cryptorchidism. The present study demonstrates that the nuclei of mesenchymal cells in the caudal part of the CSL are immunoreactively positive for androgen receptor. We examined the effects of exposure of the non-steroidal antiandrogen flutamide during the period from gestational day 10 to birth on the development of the CSL and on testis descent. Exposure of male Albino Swiss rats to the antiandrogen flutamide during this period resulted in feminization of the external genitalia and the suppression of growth of the testes and male reproductive tracts. In adulthood, testes were found to be located in diverse positions including normal scrotal (50%), intra-abdominal (10%) and ectopic suprainguinal (40%). The CSL of the testis persisted into adulthood in all flutamide-treated males, regardless of testis location. In all cases, the ligament consisted of bundles of smooth muscle fibres in the retroperitoneal fat of the posterior abdominal wall. These findings suggest that androgen blockade during embryonic development interferes with testicular descent, but that maldescent cannot be correlated with either the persistence of the CSL of the testis or its structure.

Matched MeSH terms: Cryptorchidism/embryology*; Gonads/embryology; Testis/embryology*
Fulltext Gravid Spot Predicts Developmental Progress and Reproductive Output in a Livebearing Fish, Gambusia holbrooki

Norazmi-Lokman NH, Purser GJ, Patil JG

PLoS One, 2016;11(1):e0147711.
PMID: 26808521 DOI: 10.1371/journal.pone.0147711

In most livebearing fish, the gravid spot is an excellent marker to identify brooding females, however its use to predict progress of embryonic development, brood size, timing of parturition and overall reproductive potential of populations remain unexplored. Therefore, to understand these relationships, this study quantified visual attributes (intensity and size) of the gravid spot in relation to key internal development in Gambusia holbrooki. Observations show that the colour of the gravid spot arises from progressive melanisation on the surface of the ovarian sac at its hind margin, rather than melanisation of the developing embryos or the skin of the brooding mother. More importantly, the gravid spot intensity and size were closely linked with both developmental stages and clutch size, suggesting their reliable use as external surrogates of key internal developmental in the species. Using predictive consistency of the gravid spot, we also determined the effect of rearing temperature (23 °C and 25 °C) on gestation period and parturition behaviour. The results show that gestation period was significantly reduced (F = 364.58; df = 1,48; P ˃ 0.05) at 25 °C. However there was no significant difference in average number of fry parturated in the two temperature groups (P<0.05), reaffirming that gravid spot intensity is a reliable predictor of reproductive output. The parturition in the species occurred predominantly in the morning and in contrast to earlier reports, tails of the fry emerged first with a few exceptions of head-first, twin and premature births. This study demonstrates utility of the gravid spot for downstream reproductive investigations in a live-bearing fish both in the field and laboratory. The reproducibility of the relationships (intensity with both developmental stage and clutch size), imply that they are also relevant to wild populations that experience varying temperature climes and stressors, significant deviations of which may serve as indicators of environmental health and climate variability.

Matched MeSH terms: Cyprinodontiformes/embryology
Fulltext Oviparous elasmobranch development inside the egg case in 7 key stages

Musa SM, Czachur MV, Shiels HA

PLoS One, 2018;13(11):e0206984.
PMID: 30399186 DOI: 10.1371/journal.pone.0206984

Embryological stages of oviparous elasmobranch during development can be difficult to identify, requiring magnification and/or fixation of an anaesthetized embryo. These restrictions are poorly suited for monitoring the development of living elasmobranchs inside their egg cases. There are two major aims of this study. The first was to observe elasmobranch embryonic development non-invasively and produce a non-invasive developmental key for identifying the life stages for an elasmobranch inside the egg case. To this end, 7 key developmental stages were identified for the greater spotted catshark, Scyliorhinus stellaris, and are provided here with diagrams from multiple perspectives to demonstrate the key features of each stage. The physiological and ecological relevance of each stage are discussed in terms of structure and function for embryonic survival in the harsh intertidal zone. Also discussed is the importance of the egg case membrane and the protective embryonic jelly. The second aim of the study was to understand the applicability of the 7 developmental stages from S. stellaris to other oviparous elasmobranchs. Thus, changes in embryonic body size and egg yolk volume at each stage were measured and compared with those of the closely related, lesser spotted catshark, Scyliorhinus canicula. We find nearly identical growth patterns and yolk consumption patterns in both species across the 7 developmental stages. Thus, although the 7 developmental stages have been constructed in reference to the greater spotted catshark, we suggest that it can be applied to other oviparous elasmobranch species with only minor modification.

Matched MeSH terms: Sharks/embryology*
Egg structure and outline of embryonic development of the basal mantodean, Metallyticus splendidus Westwood, 1835 (Insecta, Mantodea, Metallyticidae)

Fukui M, Fujita M, Tomizuka S, Mashimo Y, Shimizu S, Lee CY, et al.

Arthropod Struct Dev, 2018 Jan;47(1):64-73.
PMID: 29109050 DOI: 10.1016/j.asd.2017.11.001

The egg structure and outline of the embryonic development of Metallyticus splendidus of one of the basal Mantodea representatives, Metallyticidae, were described in the present study. The results obtained were compared with those from the previous studies, to reconstruct and discuss the groundplan of Mantodea and Dictyoptera. In M. splendidus, the egg is spheroidal, it has a convex ventral side at the center in which numerous micropyles are grouped, and it possesses a conspicuous hatching line in its anterior half. These are the groundplan features of mantodean eggs and the "grouped micropyles in the ventral side of the egg" are regarded as an apomorphic groundplan feature of Dictyoptera. A small circular embryo is formed by a simple concentration of blastoderm cells, which then undergoes embryogenesis of the typical short germ band type. Blastokinesis is of the "non-reversion type" and the embryo keeps its original superficial position and original orientation throughout embryonic development. During the middle stages of development, the embryo undergoes rotation around the egg's anteroposterior axis. These features are a part of the groundplan of Mantodea. It is uncertain whether sharing of the "non-reversion type" of blastokinesis by Mantodea and blaberoidean Blattodea can be regarded as homology or homoplasy.

Matched MeSH terms: Embryo, Nonmammalian/embryology*; Mantodea/embryology*
Fulltext Congenital rudimentary medial meniscus--report of a case of development arrest of medial meniscus

Aranha A, Nor M

Singapore Med J, 1990 Apr;31(2):189-90.
PMID: 2371587

We present an unusual case, where the medial meniscus does not coincide with the embryological development of the formation of a discoid cartilage. A fairly, careful perusal of English literature since 1945 to date makes us feel that the following case merits recording. The meniscus had a normal anterior horn attached to the intercondylar area, in front of the anterior cruciate ligament. Medially, it was attached to the capsule and the condylar surface of the medial tibial plateau. The posterior horn was rounded, smooth, and floating free of any attachments. It was approximately 2 cms in length, semilunar in shape, and extended posteriorly up to the anterior margin of the medial collateral ligament. The rest of the medial tibial plateau had no other protective covering.

Matched MeSH terms: Cartilage, Articular/embryology; Menisci, Tibial/embryology
Fecundity, embryonic and ovarian development of blue swimming crab, Portunus pelagicus (Linnaeus, 1758) in coastal water of Johor, Malaysia

Ikhwanuddin M, Azra MN, Siti-Aimuni H, Abol-Munafi AB

Pak J Biol Sci, 2012 Aug 01;15(15):720-8.
PMID: 24171257

Blue swimming crab, Portunus pelagicus is widely study and research throughout the Indo-West Pacific, but little is known of its reproductive biology in Malaysia. The present study describes the fecundity, embryonic development and ovarian development stages of the P. pelagicus from Johor coastal water, Malaysia. Carapace width range of berried crabs sampled was from 9.64 to 13.32 cm, while the body weight range was from 75 to 235 g. The mean number of egg produced by females in different sizes ranged from 105443.333 +/- 35448.075 per eggs batch. Mean egg size during embryonic development at stage 1 was 0.307 +/- 0.037, while 0.386 +/- 0.039 and 0.396 +/- 0.033 for stage 2 and stage 3, respectively. Study showed that there was significant (p < 0.05) relationship between the number of eggs and carapace width/body weight. Mean diameter oocyte during ovarian development at stage 1 was 97.732 +/- 12.391 while for stage 2 was 149.516 +/- 23.287. Stage 3 showed increasingly of size with mean diameter was 158.506 +/- 27.616 and 181.013 +/- 24.339 for stage 4.

Matched MeSH terms: Brachyura/embryology*; Ovary/embryology*
Fulltext A persistent left superior vena cava

Paval J, Nayak S

Singapore Med J, 2007 Mar;48(3):e90-3.
PMID: 17342280

Persistent left superior vena cava is the most common form of anomalous venous drainage involving the superior vena cava, and represents persistence of the left horn of the embryonic sinus venosus, which normally involutes during normal development to become the coronary sinus. Almost always, a persistent left superior vena cava enters the right atrium through the orifice of an enlarged coronary sinus. In this case report of a 60-year-old male cadaver, we describe a persistent left superior vena cava and discuss its embryology and clinical significance.

Matched MeSH terms: Vena Cava, Superior/embryology
Fulltext Embryonic, larval, and early juvenile development of the tropical sea urchin, Salmacis sphaeroides (Echinodermata: Echinoidea)

Rahman MA, Yusoff FM, Arshad A, Shamsudin MN, Amin SM

ScientificWorldJournal, 2012;2012:938482.
PMID: 23055824 DOI: 10.1100/2012/938482

Salmacis sphaeroides (Linnaeus, 1758) is one of the regular echinoids, occuring in the warm Indo-West Pacific, including Johor Straits, between Malaysia and Singapore. In order to investigate the developmental basis of morphological changes in embryos and larvae, we documented the ontogeny of S. sphaeroides in laboratory condition. Gametes were obtained from adult individuals by 0.5 M KCl injection into the coelomic cavity. Fertilization rate at limited sperm concentration (10(-5) dilution) was 96.6 ± 1.4% and the resulting embryos were reared at 24°C. First cleavage (2-cell), 4-cell, 8-cell, 16-cell, 32-cell, and multicell (Morulla) stages were achieved 01.12, 02.03, 02.28, 02.51, 03.12, and 03.32 h postfertilization. Ciliated blastulae with a mean length of 174.72 ± 4.43 μm hatched 08.45 h after sperm entry. The gastrulae formed 16.15 h postfertilization and the archenteron elongated constantly while ectodermal red-pigmented cells migrated synchronously to the apical plate. Pluteus larva started to feed unicellular algae in 2 d, grew continuously, and finally attained metamorphic competence in 35 d after fertilization. Metamorphosis took approximately 1 h 30 min from attachment to the complete resorption of larval tissues and the development of complete juvenile structure with adult spines, extended tubefeet and well-developed pedicellaria, the whole event of which usually took place within 1 d postsettlement. This study represents the first successful investigation on embryonic, larval, and early juvenile development of S. sphaeroides. The findings would greatly be helpful towards the understanding of ontogeny and life-history strategies, which will facilitate us to develop the breeding, seed production, and culture techniques of sea urchins in captive condition.

Matched MeSH terms: Sea Urchins/embryology*
Fulltext A novel de novo mutation in COL2A1 gene associated with fetal skeletal dysplasia

Chu FC, Hii LY, Hung TH, Lo LM, Hsieh TT, Shaw SW

Taiwan J Obstet Gynecol, 2021 Mar;60(2):359-362.
PMID: 33678343 DOI: 10.1016/j.tjog.2021.01.017

OBJECTIVE: Skeletal dysplasias, caused by genetic mutations, are a heterogenous group of heritable disorders affecting bone development during fetal life. Stickler syndrome, one of the skeletal dysplasias, is an autosomal dominant connective tissue disorder caused by abnormal collagen synthesis owing to a genetic mutation in COL2A1.
CASE REPORT: We present the case of a 38-year-old multipara woman whose first trimester screening showed a normal karyotype. However, the bilateral femur and humerus length symmetrically shortened after 20 weeks. Next-generation sequencing for mutations in potential genes leading to skeletal dysplasia detected a novel de novo mutation (c.1438G > A, p.Gly480Arg) in COL2A1, causing Stickler syndrome type 1. This pathogenic mutation might impair or destabilize the collagen structure, leading to collagen type II, IX, and XI dysfunction.
CONCLUSION: We identified a novel de novo mutation in COL2A1 related to the STL1 syndrome and delineated the extent of the skeletal dysplasia disease spectrum.

Matched MeSH terms: Arthritis/embryology; Connective Tissue Diseases/embryology; Hearing Loss, Sensorineural/embryology; Retinal Detachment/embryology
Fulltext Multivariate analysis of factors affecting presence and/or agenesis of third molar tooth

Alam MK, Hamza MA, Khafiz MA, Rahman SA, Shaari R, Hassan A

PLoS One, 2014;9(6):e101157.
PMID: 24967595 DOI: 10.1371/journal.pone.0101157

To investigate the presence and/or agenesis of third molar (M3) tooth germs in orthodontics patients in Malaysian Malay and Chinese population and evaluate the relationship between presence and/or agenesis of M3 with different skeletal malocclusion patterns and sagittal maxillomandibular jaw dimensions. Pretreatment records of 300 orthodontic patients (140 males and 160 females, 219 Malaysian Malay and 81 Chinese, average age was 16.27±4.59) were used. Third-molar agenesis was calculated with respect to race, genders, number of missing teeth, jaws, skeletal malocclusion patterns and sagittal maxillomandibular jaw dimensions. The Pearson chi-square test and ANOVA was performed to determine potential differences. Associations between various factors and M3 presence/agenesis groups were assessed using logistic regression analysis. The percentages of subjects with 1 or more M3 agenesis were 30%, 33% and 31% in the Malaysian Malay, Chinese and total population, respectively. Overall prevalence of M3 agenesis in male and female was equal (P>0.05). The frequency of the agenesis of M3s is greater in maxilla as well in the right side (P>0.05). The prevalence of M3 agenesis in those with a Class III and Class II malocclusion was relatively higher in Malaysian Malay and Malaysian Chinese population respectively. Using stepwise regression analyses, significant associations were found between Mx (P<0.05) and ANB (P<0.05) and M3 agenesis. This multivariate analysis suggested that Mx and ANB were significantly correlated with the M3 presence/agenesis.

Matched MeSH terms: Molar, Third/embryology*
Fulltext A randomised controlled trial on hypolipidemic effects of Nigella Sativa seeds powder in menopausal women

Ibrahim RM, Hamdan NS, Mahmud R, Imam MU, Saini SM, Rashid SN, et al.

J Transl Med, 2014;12:82.
PMID: 24685020 DOI: 10.1186/1479-5876-12-82

The risk of cardiovascular diseases (CVD) is increased tremendously among menopausal women, and there is an increasing demand for alternative therapies for managing factors like dyslipidemia that contribute to CVD development.

Matched MeSH terms: Nigella sativa/embryology*
Optimization of supercritical methanol reactive extraction by response surface methodology and product characterization from Jatropha curcas L. seeds

Lim S, Lee KT

Bioresour Technol, 2013 Aug;142:121-30.
PMID: 23735793 DOI: 10.1016/j.biortech.2013.05.010

In this study, optimization of supercritical reactive extraction directly from Jatropha seeds in a high pressure batch reactor using Response Surface Methodology (RSM) coupled with Central Composite Rotatable Design (CCRD) was performed. Four primary variables (methanol to solid ratio (SSR), reaction temperature, time and CO2 initial pressure) were investigated under the proposed constraints. It was found that all variables had significant effects towards fatty acid methyl esters (FAME) yield. Moreover, three interaction effects between the variables also played a major role in influencing the final FAME yield. Optimum FAME yield at 92.0 wt.% was achieved under the following conditions: 5.9 SSR, 300°C, 12.3 min and 20 bar CO2. Final FAME product was discovered to fulfil existing international standard. Preliminary characterization analysis proved that the solid residue can be burnt as solid fuel in the form of biochar while the liquid product can be separated as specialty chemicals or burned as bio-oil for energy production.

Matched MeSH terms: Jatropha/embryology*
A novel transcript of oil palm (Elaeis guineensis Jacq.), Eg707, is specifically upregulated in tissues related to totipotency

Le VT, Sarpan N, Huynh K, Ooi SE, Napis S, Ho CL, et al.

Mol Biotechnol, 2011 Jun;48(2):156-64.
PMID: 21153717 DOI: 10.1007/s12033-010-9356-4

In this study, we report the molecular characterization of clone Eg707 isolated from cell suspension culture of the oil palm. The deduced polypeptide of clone Eg707 is highly similar to an unknown protein from Arabidopsis thaliana. The presence of an Ald-Xan-dh-C2 superfamily domain in the deduced protein sequence suggested that Eg707 protein might be involved in abscisic acid biosynthesis. Eg707 might be present as a single copy gene in the oil palm genome. This gene is highly expressed in tissue cultured materials compared to vegetative and reproductive tissues, suggesting a role of this gene during oil palm somatic embryogenesis or at the early stages of embryo development. Expression analysis of Eg707 by RNA in situ hybridization showed that Eg707 transcripts were present throughout somatic embryo development starting from proembryo formation at the embryogenic callus stages till the maturing embryo stages. Since proembryo formation within the embryogenic callus is one of the first key factors in oil palm somatic embryo development, it is suggested that Eg707 could be used as a reliable molecular marker for detecting early stage of oil palm somatic embryogenesis.

Matched MeSH terms: Arecaceae/embryology*
Evaluation of papaya seeds as a novel non-conventional low-cost adsorbent for removal of methylene blue

Hameed BH

J Hazard Mater, 2009 Mar 15;162(2-3):939-44.
PMID: 18606493 DOI: 10.1016/j.jhazmat.2008.05.120

The feasibility of using papaya seeds (PS), abundantly available waste in Malaysia, for the cationic dye (methylene blue) adsorption has been investigated. Batch adsorption studies were conducted to study the effects of contact time, initial concentration (50-360 mg/L), pH (3-10) and adsorbent dose (0.05-1.00 g) on the removal of methylene blue (MB) at temperature of 30 degrees C. The equilibrium data were analyzed by the Langmuir, the Freundlich and the Temkin isotherms. The data fitted well with the Langmuir model with a maximum adsorption capacity of 555.557 mg/g. The pseudo-second-order kinetics was the best for the adsorption of MB by PS with good correlation. The results demonstrated that the PS is very effective to remove methylene blue from aqueous solutions.

Matched MeSH terms: Carica/embryology*
Removal of basic dye from aqueous medium using a novel agricultural waste material: pumpkin seed hull

Hameed BH, El-Khaiary MI

J Hazard Mater, 2008 Jul 15;155(3):601-9.
PMID: 18178306 DOI: 10.1016/j.jhazmat.2007.11.102

In this work, pumpkin seed hull (PSH), an agricultural solid waste, is proposed as a novel material for the removal of methylene blue (MB) from aqueous solutions. The effects of the initial concentration, agitation time and solution pH were studied in batch experiments at 30 degrees C. The equilibrium process was described well by the multilayer adsorption isotherm. The adsorption kinetics can be predicted by the pseudo-first-order and the modified pseudo-first-order models. The mechanism of adsorption was also studied. It was found that for a short time period the rate of adsorption is controlled by film diffusion. However, at longer adsorption times, pore-diffusion controls the rate of adsorption. Pore diffusion takes place in two distinct regimes, corresponding to diffusion in macro- and mesopores. The results demonstrate that the PSH is very effective in the removal of MB from aqueous solutions.

Matched MeSH terms: Cucurbita/embryology*
Highly efficient protocol for callogenesis, somagenesis and regeneration of Indica rice plants

Azizi P, Rafii MY, Mahmood M, Hanafi MM, Abdullah SN, Abiri R, et al.

C. R. Biol., 2015 Jul;338(7):463-70.
PMID: 26050100 DOI: 10.1016/j.crvi.2015.04.004

In the present study, we have reported a simple, fast and efficient regeneration protocol using mature embryos as explants, and discovered its effective applicability to a range of Indica rice genotypes. We have considered the response of six varieties in the steps of the regeneration procedure. The results showed that calli were variably developed from the scutellar region of seeds and visible within 6-20 days. The highest and lowest calli induction frequency (70% and 51.66%) and number of induced calli from seeds (14 and 10.33) were observed in MR269 and MRQ74, respectively. The maximum and minimum number (7.66 and 4) and frequency of embryogenic calli (38.33% and 20%) were recorded in MR219 and MRQ74, respectively. However, the highest browning rate was observed in MR84 (87%) and the lowest rate in MRQ50 (46%). The majority of plants regenerated from embryogenic calli were obtained from MRQ50 (54%) and the minimum number of plants from MR84. In this study, the maximum numbers of plantlets were regenerated from the varieties with highest rate of embryogenic calli. Also, various varieties, including MRQ50, MR269, MR276 and MR219, were satisfactorily responding, while MRQ74 and MR84 weakly responded to the procedure. Such a simple, successful and generalized method possesses the potential to become an important tool for crop improvement and functional studies of genes in rice as a model monocot plant.

Matched MeSH terms: Oryza/embryology

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links