A variety of imine derivatives have been synthesized via Suzuki cross coupling of N-(4-bromophenyl)-1-(3-bromothiophen-2-yl)methanimine with various arylboronic acids in moderate to good yields (58-72%). A wide range of electron donating and withdrawing functional groups were well tolerated in reaction conditions. To explore the structural properties, Density functional theory (DFT) investigations on all synthesized molecules (3a-3i) were performed. Conceptual DFT reactivity descriptors and molecular electrostatic potential analyses were performed by using B3LYP/6-31G(d,p) method to explore the reactivity and reacting sites of all derivatives (3a-3i).
A graphene-based three-branch nanojunction (TBJ) device having nanowire width of 200 nm was successfully fabricated. The layer number of graphene prepared by mechanical exfoliation was determined using a simple optical contrast method which showed good agreement with theoretical value. n-type doping by Polyethylene imines (PEI) was done to control the position of Dirac point. Baking and PEI doping was found to decrease contact resistance and increase the carrier mobility. The chemically-doped TBJ graphene showed carrier mobility of 20000 cm2/Vs, which gave related mean free path of 175 nm.
In the title di-thio-carbazate compound, C17H19N3S2, the central CN2S2 residue is essentially planar (r.m.s. deviation = 0.0288 Å) and forms dihedral angles of 9.77 (8) and 77.47 (7)° with the substituted-pyridyl and p-tolyl rings, respectively, indicating a highly twisted mol-ecule; the dihedral angle between the rings is 85.56 (8)°. The configuration about the C=N bond is Z, which allows for the formation of an intra-molecular N-H⋯N(pyrid-yl) hydrogen bond. The packing features tolyl-methyl-C-H⋯N(imine), pyridyl-C-H⋯π(tol-yl) and π-π inter-actions [between pyridyl rings with a distance = 3.7946 (13) Å], which generates jagged supra-molecular layers that stack along the b axis with no directional inter-actions between them.
The Yb(III) atom in the title complex, [Yb(C27H24Cl3N4O3)] [systematic name: (2,2',2''-{(nitrilo)-tris-[ethane-2,1-di-yl(nitrilo)-methylyl-idene]}tris-(4-chloro-phenolato)ytterbium(III)], is coordinated by a trinegative, hepta-dentate ligand and exists within an N4O3 donor set, which defines a capped octa-hedral geometry whereby the amine N atom caps the triangular face defined by the three imine N atoms. The packing features supra-molecular layers that stack along the a axis, sustained by a combination of aryl-C-H⋯O, imine-C-H⋯O, methyl-ene-C-H⋯π(ar-yl) and end-on C-Cl⋯π(ar-yl) inter-actions. A Hirshfeld surface analysis points to the major contributions of C⋯H/ H⋯C and Cl⋯H/H⋯Cl inter-actions (along with H⋯H) to the overall surface but the Cl⋯H contacts are at distances greater than the sum of their van der Waals radii.
The title CuII complex, [Cu(C13H11N2OS2)2], features a trans-N2S2 donor set as a result of the CuII atom being located on a crystallographic centre of inversion and being coordinated by thiol-ate-S and imine-N atoms derived from two di-thio-carbazate anions. The resulting geometry is distorted square-planar. In the crystal, π(chelate ring)-π(fur-yl) [inter-centroid separation = 3.6950 (14) Å and angle of inclination = 5.33 (13)°] and phenyl-C-H⋯π(phen-yl) inter-actions sustain supra-molecular layers lying parallel to (02). The most prominent inter-actions between layers, as confirmed by an analysis of the calculated Hirshfeld surface, are phenyl-H⋯H(phen-yl) contacts. Indications for Cu⋯Cg(fur-yl) contacts (Cu⋯Cg = 3.74 Å) were also found. Inter-action energy calculations suggest the contacts between mol-ecules are largely dispersive in nature.
The title compound, C9H11N3O2S, is a second monoclinic (P21/c) polymorph of the previously reported Cc form [Tan et al. (2008b ▶). Acta Cryst. E64, o2224]. The mol-ecule is non-planar, with the dihedral angle between the N3CS residue (r.m.s. deviation = 0.0816 Å) and the benzene ring being 21.36 (4)°. The conformation about the C=N bond [1.292 (2) Å] is E, the two N-bound H atoms are anti, and the inner hy-droxy O-bound and outer amide N-bound H atoms form intra-molecular hydrogen bonds to the imine N atom. Crucially, the H atom of the outer hy-droxy group is approximately syn to the H atom of the benzene C atom connecting the two C atoms bearing the hy-droxy substituents. This arrangement enables the formation of supra-molecular tubes aligned along [010] and sustained by N-H⋯O, O-H⋯S and N-H⋯S hydrogen bonds; the tubes pack with no specific inter-actions between them. While the mol-ecular structure in the Cc form is comparable, the H atom of the outer hy-droxy group is approximately anti, rather than syn. This different orientation leads to the formation a three-dimensional architecture based on N-H⋯O and O-H⋯S hydrogen bonds.
In the title hydrate, C9H12N4S·H2O (systematic name: 3-methyl-1-{(E)-[(3-methyl-pyridin-2-yl)methyl-idene]amino}-thio-urea monohydrate), a small twist is noted between the pyridine ring and the rest of the organic mol-ecule [dihedral angle = 6.96 (5)°]. The imine and pyridine N atoms are syn, and the amine H atoms are anti. The latter arrangement allows for the formation of an intra-molecular N-H⋯N(imine) hydrogen bond. Both the N-bonded H atoms form hydrogen bonds to symmetry-related water mol-ecules, and the latter forms O-H hydrogen bonds with the pyridine N and thione S atoms. These inter-actions lead to supra-molecular layers that stack along the a-axis direction with no specific inter-actions between them.
In the title di-thio-carbazate ester, C16H17N3S2 (systematic name: (Z)-{[(benzyl-sulfan-yl)methane-thio-yl]amino}[1-(6-methyl-pyridin-2-yl)ethyl-idene]amine), the central methyl-idenehydrazinecarbodi-thio-ate (C2N2S2) core is almost planar (r.m.s. deviation = 0.0111 Å) and forms dihedral angles of 71.67 (3)° with the approximately orthogonally inclined thio-ester phenyl ring, and 7.16 (7)° with the approximately coplanar substituted pyridyl ring. The latter arrangement and the Z configuration about the imine-C=N bond allows for the formation of an intra-molecular hydrazine-N-H⋯N(pyrid-yl) hydrogen bond that closes an S(6) loop. In the crystal, phenyl-C-H⋯S(thione), methyl-ene-C-H⋯π(pyrid-yl), methyl-ene- and phenyl-C-H⋯π(phen-yl) contacts connect mol-ecules into supra-molecular layers propagating in the bc plane; the layers stack along the a axis with no directional inter-actions between them. The analysis of the Hirshfeld surface indicates the relative importance of an intra-layer phenyl-H⋯H(pyrid-yl) contact upon the mol-ecular packing.
In the title thio-semicarbazone compound, C18H18ClN3S, the CN3S residue is almost planar (r.m.s. deviation = 0.0031 Å) and forms dihedral angles of 65.99 (7) and 34.60 (10)° with the phenyl and chloro-benzene rings, respectively; the dihedral angle between the aromatic rings is 85.13 (8)°. The conformation about the C=N bond is Z, and that about the C=C bonds is E. The imine N and ethyl N atoms are syn and are linked by an eth-yl-imine N-H⋯N hydrogen bond. This H atom also forms an inter-molecular hydrogen bond to the thione S atom, resulting in a supra-molecular helical chain propagating along the b axis. The chains are consolidated into a three-dimensional architecture by phenyl-C-H⋯Cl contacts and weak π-π inter-actions between centrosymmetrically related chloro-benzene rings [inter-centroid distance = 3.9127 (15) Å].
The mol-ecule of the title Schiff base compound, C14H14N2O2, displays an E conformation with respect the imine C=N double bond. The mol-ecule is approximately planar, with the dihedral angle formed by the planes of the pyridine and benzene rings being 5.72 (6)°. There is an intra-molecular hydrogen bond involving the phenolic H and imine N atoms.
The asymmetric unit of the title complex, [Pd(C15H13FNO)2], contains one half of the mol-ecule with the Pd(II) cation lying on an inversion centre and is coordinated by the bidentate Schiff base anion. The geometry around the cationic Pd(II) centre is distorted square planar, chelated by the imine N- and phenolate O-donor atoms of the two Schiff base ligands. The N- and O-donor atoms of the two ligands are mutually trans, with Pd-N and Pd-O bond lengths of 2.028 (2) and 1.9770 (18) Å, respectively. The fluoro-phenyl ring is tilted away from the coordination plane and makes a dihedral angle of 66.2 (2)° with the phenolate ring. In the crystal, mol-ecules are linked into chains along the [101] direction by weak C-H⋯O hydrogen bonds. Weak π-π inter-actions with centroid-centroid distances of 4.079 (2) Å stack the mol-ecules along c.
Two imines of different molecular sizes namely 3-(phenylimino) indolin-2-one (PII) and 3,3- (1,4-phenylenebis (azan-1-yl-1-ylidene) diindolin-2-one (PDI) were investigated for their corrosion inhibition on mild steel in 1 M HCl solution using electrochemical impedance spectroscopy (EIS). The bigger molecule PDI containing double the amount of isatin moiety exhibited higher inhibition efficiency of 87.3% while PII that contained monoisatin moiety showed a lower inhibition efficiency of 74.8%. Both compounds had an increase in inhibition efficiencies percentage as concentrations increased. Density functional theory (DFT) was used to determine the correlation between the corrosion inhibition efficiency and electronic parameters. The DFT calculations indicated that the corrosion inhibition efficiency was mainly dependant on the frontier orbital energy gap and the chemical softness/hardness of the imines.
In the present study, 4-methylpyridin-2-amine was reacted with 3-bromothiophene-2-carbaldehyde and the Schiff base (E)-1-(3-bromothiophen-2-yl)-N-(4-methylpyridin-2-yl)methanimine was obtained in a 79% yield. Coupling of the Schiff base with aryl/het-aryl boronic acids under Suzuki coupling reaction conditions, using Pd(PPh3)4 as catalyst, yielded products with the hydrolysis of the imine linkages (5a-5k, 6a-6h) in good to moderate yields. To gain mechanistic insight into the transition metal-catalyzed hydrolysis of the compounds, density functional theory (DFT) calculations were performed. The theoretical calculations strongly supported the experiment and provided an insight into the transition metal-catalyzed hydrolysis of imines.
In the title isonicotinohydrazide hydrate, C14H12BrN3O2·H2O {systematic name: N'-[(1E)-1-(5-bromo-2-hy-droxy-phen-yl)ethyl-idene]pyridine-4-carbohydrazide monohydrate}, the central CN2O region of the organic mol-ecule is planar and the conformation about the imine-C=N bond is E. While an intra-molecular hy-droxy-O-H⋯N(imine) hydrogen bond is evident, the dihedral angle between the central residue and the benzene rings is 48.99 (9)°. Overall, the mol-ecule is twisted, as seen in the dihedral angle of 71.79 (6)° between the outer rings. In the crystal, hydrogen-bonding inter-actions, i.e. hydrazide-N-H⋯O(water), water-O-H⋯O(carbon-yl) and water-O-H⋯N(pyrid-yl), lead to supra-molecular ribbons along the a-axis direction. Connections between these, leading to a three-dimensional architecture, are mediated by Br⋯Br halogen bonding [3.5366 (3) Å], pyridyl-C-H⋯O(carbon-yl) as well as weak π-π inter-actions [inter-centroid separation between benzene rings = 3.9315 (12) Å]. The Hirshfeld surface analysis reveals the importance of hydrogen atoms in the supra-molecular connectivity as well as the influence of the Br⋯Br halogen bonding.
In the organic mol-ecule of the title hydrate, C11H15N3OS·H2O, {systematic name: 3-ethyl-1-{(E)-[1-(2-hy-droxy-phen-yl)ethyl-idene]amino}-thio-urea monohydrate}, a dihedral angle of 5.39 (2)° is formed between the hy-droxy-benzene ring and the non-H atoms comprising the side chain (r.m.s. deviation = 0.0625 Å), with the major deviation from planarity noted for the terminal ethyl group [the C-N-C-C torsion angle = -172.17 (13)°]. The N-H H atoms are syn and an intra-molecular hy-droxy-imine O-H⋯N hydrogen bond is noted. In the crystal, the N-bonded H atoms form hydrogen bonds to symmetry-related water mol-ecules, and the latter form donor inter-actions with the hy-droxy O atom and with a hy-droxy-benzene ring, forming a O-H⋯π inter-action. The hydrogen bonding leads to supra-molecular tubes aligned along the b axis. The tubes are connected into layers via C-H⋯O inter-actions, and these stack along the c axis with no directional inter-actions between them.
A series of Schiff bases have been successfully synthesized through the acid-catalyzed condensation of S-substituted dithiocarbazates and three enantiomerically pure monoterpenes, (1 R )-(+)-camphor, (1 S )-(-)-camphor, (1 R )-(-)-camphorquinone, (1 S )-(+)-camphorquinone, ( R )-(-)-carvone and ( S )-(+)-carvone. Spectroscopic results revealed that the Schiff bases containing camphor or carvone likely adopted an E -configuration along the characteristic imine bond while those containing camphorquinone assumed a Z -configuration. The antidengue potential of these compounds was evaluated based on DENV 2 caused cytopathic effect (CPE) reduction-based in vitro evaluation. The compounds were validated through secondary foci forming unit reduction assay (FFURA). Compounds were also tested for their cytotoxicity against Vero cells. The compounds showed variable degrees of antiviral activity with the camphor compounds displaying the highest antidengue potential. The enantiomers of the compounds behaved almost similarly during the antiviral evaluation.
A mononuclear and new tetranuclear metal complexes of Zn(II) with Schiff base ligands L1 and L2 respectively, were synthesised. L1 was obtained through the condensation of salicylaldehyde with ortho-phenylenediamine while L2 was the product of reaction between of ortho-vanillin with 2,4,6-trimethyl-m-phenylenediamine. The ligands and complexes were characterised via elemental analysis, melting point, IR and NMR spectroscopy. The shifting of v(C=N), v(C-OH) and v(O-CH3) infrared peaks upon coordination with Zn(II) indicated that these three moieties play a significant role in the complexation. It was found that L1 acted as tetradentate ligand, coordinating with Zn(II) centres through phenolic oxygen and imine nitrogen. The ligand L2 acted as a hexadentate ligand, bonded to metal via phenolic oxygen, imine nitrogen and methoxy oxygen, where four Zn(II) centres formed bridges to connect two ligands.
A new class of liquid crystalline acetylide-imine system was successfully synthesized, characterized
and deposited on indium tin oxide (ITO) coated substrate via electrochemical deposition
method for potential organic film application. The relationship between liquid crystal
molecular structure, phase transition temperature and electrical performance was evaluated.
The mesomorphic properties were identified via polarized optic microscopy (POM) which displayed
fan-shaped texture of smectic A phase and their corresponding transition enthalpies
are in concurrence with DSC and TGA studies. The findings from the conductivity analysis
revealed that the fabricated film exhibits good electrical performance where it displayed
linear current-voltage relationship of I-V curve. Therefore, this proposed type of molecular
framework has given an ideal indication to act as transporting material for application in
optoelectronic devices.
This paper presents a new approach in assembling bone extracellular matrix components onto PLA films, and investigates the most favourable environment which can be created using the technique for cell-material interactions. Poly (lactic acid) (PLA) films were chemically modified by covalently binding the poly(ethylene imine) (PEI) as to prepare the substrate for immobilization of polyelectrolyte multilayers (PEMs) coating. Negatively charged polyelectrolyte consists of well-dispersed silicon-carbonated hydroxyapatite (SiCHA) nanopowders in hyaluronic acid (Hya) was deposited onto the modified PLA films followed by SiCHA in collagen type I as the positively charged polyelectrolyte. The outermost layer was finally cross-linked by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrocholoride and N-hydroxysulfosuccinimide sodium salt (EDC/NHS) solutions. The physicochemical features of the coated PLA films were monitored via X-ray Photoelectron Spectroscopy (XPS) and Atomic Force Microscope (AFM). The amounts of calcium and collagen deposited on the surface were qualitatively and quantitatively determined. The surface characterizations suggested that 5-BL has the optimum surface roughness and highest amounts of calcium and collagen depositions among tested films. In vitro human mesenchymal stem cells (hMSCs) cultured on the coated PLA films confirmed that the coating materials greatly improved cell attachment and survival compared to unmodified PLA films. The cell viability, cell proliferation and Alkaline Phosphatase (ALP) expression on 5-BL were found to be the most favourable of the tested films. Hence, this newly developed coating materials assembly could contribute to the improvement of the bioactivity of polymeric materials and structures aimed to bone tissue engineering applications.