Displaying all 10 publications

Abstract:
Sort:
  1. Saat MN, Annuar MS, Alias Z, Chuan LT, Chisti Y
    Bioprocess Biosyst Eng, 2014 May;37(5):765-75.
    PMID: 24005762 DOI: 10.1007/s00449-013-1046-8
    Production of extracellular laccase by the white-rot fungus Pycnoporus sanguineus was examined in batch submerged cultures in shake flasks, baffled shake flasks and a stirred tank bioreactor. The biomass growth in the various culture systems closely followed a logistic growth model. The production of laccase followed a Luedeking-Piret model. A modified Luedeking-Piret model incorporating logistic growth effectively described the consumption of glucose. Biomass productivity, enzyme productivity and substrate consumption were enhanced in baffled shake flasks relative to the cases for the conventional shake flasks. This was associated with improved oxygen transfer in the presence of the baffles. The best results were obtained in the stirred tank bioreactor. At 28 °C, pH 4.5, an agitation speed of 600 rpm and a dissolved oxygen concentration of ~25 % of air saturation, the laccase productivity in the bioreactor exceeded 19 U L(-1 )days(-1), or 1.5-fold better than the best case for the baffled shake flask. The final concentration of the enzyme was about 325 U L(-1).
    Matched MeSH terms: Pycnoporus/enzymology*; Pycnoporus/growth & development*
  2. Omar FN, Hafid HS, Samsu Baharuddin A, Mohammed MAP, Abdullah J
    Planta, 2017 Sep;246(3):567-577.
    PMID: 28620814 DOI: 10.1007/s00425-017-2717-5
    MAIN CONCLUSION: X-ray microtomography results revealed that delignification process damaged the oil palm fibers, which correlated well with reduction of lignin components and increase of the phenolic content. Biodegradation investigation of natural fibers normally focuses on physico-chemical analysis, with less emphasis on physical aspect like fiber structures affect from microbial activity. In this work, the performance of Pycnoporus sanguineus to delignify oil palm empty fruit bunch fibers through solid-state fermentation utilizing various ratio of POME sludge was reported. In addition to tensile testing, physico-chemical and X-ray microtomography (µ-CT) analyses on the oil palm fibers were conducted to determine the effectiveness of the degradation process. The best ratio of fiber to fungi (60:40) was chosen based on the highest lignin loss and total phenolic content values and further investigation was performed to obtain fermentation kinetics data of both laccase and manganese peroxidase. µ-CT results revealed that delignification process damaged the pre-treated and untreated fibers structure, as evident from volume reduction after degradation process. This is correlated with reduction of lignin component and increase of the phenolic content, as well as lower stress-strain curves of the pre-treated fibers compared to the untreated ones (from tensile testing). It is suggested that P. sanguineus preferred to consume the outer layer of the fiber, before it penetrates through the cellular structure of the inner fiber.
    Matched MeSH terms: Pycnoporus/metabolism
  3. Yahaya YA, Mat Don M, Bhatia S
    J Hazard Mater, 2009 Jan 15;161(1):189-95.
    PMID: 18513859 DOI: 10.1016/j.jhazmat.2008.03.104
    The ability of white-rot fungus, Pycnoporus sanguineus to adsorb copper (II) ions from aqueous solution is investigated in a batch system. The live fungus cells were immobilized into Ca-alginate gel to study the influence of pH, initial metal ions concentration, biomass loading and temperature on the biosorption capacity. The optimum uptake of Cu (II) ions was observed at pH 5 with a value of 2.76mg/g. Biosorption equilibrium data were best described by Langmuir isotherm model followed by Redlich-Peterson and Freundlich models, respectively. The biosorption kinetics followed the pseudo-second order and intraparticle diffusion equations. The thermodynamic parameters enthalpy change (10.16kJ/mol) and entropy change (33.78J/molK) were determined from the biosorption equilibrium data. The FTIR analysis showed that OH, NH, CH, CO, COOH and CN groups were involved in the biosorption of Cu (II) ions onto immobilized cells of P. sanguineus. The immobilized cells of P. sanguineus were capable of removing Cu (II) ions from aqueous solution.
    Matched MeSH terms: Pycnoporus/metabolism*
  4. Ling JG, Mansor MH, Abdul Murad AM, Mohd Khalid R, Quay DHX, Winkler M, et al.
    J Biotechnol, 2020 Jan 10;307:55-62.
    PMID: 31545972 DOI: 10.1016/j.jbiotec.2019.09.008
    Carboxylic acid reductases (CARs) are attracting burgeoning attention as biocatalysts for organic synthesis of aldehydes and their follow-up products from economic carboxylic acid precursors. The CAR enzyme class as a whole, however, is still poorly understood. To date, relatively few CAR sequences have been reported, especially from fungal sources. Here, we sought to increase the diversity of the CAR enzyme class. Six new CAR sequences from the white-rot fungus Pycnoporus cinnabarinus were identified from genome-wide mining. Genome and gene clustering analysis suggests that these PcCAR enzymes play different natural roles in Basidiomycete systems, compared to their type II Ascomycete counterparts. The cDNA sequences of all six Pccar genes were deduced and analysis of their corresponding amino acid sequence showed that they encode for proteins of similar properties that possess a conserved modular functional tri-domain arrangement. Phylogenetic analyses showed that all PcCAR enzymes cluster together with the other type IV CARs. One candidate, PcCAR4, was cloned and over-expressed recombinantly in Escherichia coli. Subsequent biotransformation-based screening with a panel of structurally-diverse carboxylic acid substrates suggest that PcCAR4 possessed a more pronounced substrate specificity compared to previously reported CARs, preferring to reduce sterically-rigid carboxylic acids such as benzoic acid. These findings thus present a new functionally-distinct member of the CAR enzyme class.
    Matched MeSH terms: Pycnoporus/enzymology*; Pycnoporus/genetics
  5. Yoon LW, Ngoh GC, Chua AS
    Enzyme Microb Technol, 2013 Sep 10;53(4):250-6.
    PMID: 23931690 DOI: 10.1016/j.enzmictec.2013.05.005
    This study examined the potential of untreated and alkali-pretreated sugarcane bagasse (SCB) in cellulase, reducing sugar (RS) and fungal biomass production via solid state fermentation (SSF) using Pycnoporus sanguineus. The impact of the composition, structure and cellulase adsorption ability of SCB on the production of cellulase, RS and fungal biomass was investigated. From the morphological and compositional analyses, untreated SCB has relatively more structural changes with a higher percentage of depolymerisation on the cellulose, hemicellulose and lignin content compared to alkali-pretreated SCB. Thus, untreated SCB favoured the production of cellulase and fungal biomass whereas alkali-pretreated SCB yielded a higher amount of RS. The composition and morphology of untreated SCB did not encourage RS production and this suggested that RS produced during SSF might be consumed in a faster rate by the more abundantly grown fungus. Besides that, alkali-pretreated SCB with higher cellulase adsorption ability could have adsorbed the cellulase produced and resulted in a lower cellulase titre. In short, the production of specific bioproducts via SSF is dependent on the structure and composition of the substrate applied.
    Matched MeSH terms: Pycnoporus/growth & development; Pycnoporus/metabolism
  6. Ong, Khai Lun, Tan, Bee Wai, Liew, Siew Ling
    MyJurnal
    In this study, pineapple cannery waste materials were used as substrate for the microbial production of vanillic acid and vanillin by Aspergillus niger I-1472 and Pycnoporus cinnabarinus MUCL 39533. Biotransformation of ferulic acid from pineapple waste by A. niger I-1472 to vanillic acid was optimized using Response Surface Methodology (RSM). A central composite rotatable design was used to allocate treatment combinations and factors tested for their influence on vanillic acid production were inoculum size, yeast extract concentration, diammonium tartrate concentration and initial medium pH. The amount of vanillic acid produced was used as the response for the fermentation study and was assumed to be under the influence of the four factors tested. The estimated conditions for optimal vanillic acid production were inoculum size, 3.08 ×105 CFU mL-1; yeast extract, 0.37 gL-1; diammonium tartrate, 3.88 gL-1 and initial pH, 4.3. Subsequent biotransformation of vanillic acid by P. cinnabarinus MUCL 39533 to vanillin was enhanced with the addition of resin. Under these optimal conditions, 141.00 mgL-1 of vanillin was produced from 5 g of pineapple cannery waste.
    Matched MeSH terms: Pycnoporus
  7. Mashitah Mat Don, Yus Azila Yahaya, Bhatia, Subhash
    MyJurnal
    The removal of heavy metals like lead, copper and cadmium from wastewater streams is an important environmental issue. The capability of immobilized Pycnoporus sanguineus (P. sanguineus), a white-rot macrofungi to remove heavy metals from aqueous solution in a packed bed column was investigated. Lead (Pb (II)) biosorption by immobilized cells of P. sanguineus was investigated in a packed bed column. The experiments were carried out by considering the effect of bed height (5-13 cm), flow rate (4-12 ml min-1) and initial lead (II) concentration (50-300 mg L-1). The breakthrough profiles showed that the saturation of metal ions was achieved faster for 5 cm bed height and 12 ml min-1 influent flow rate. However, the breakthrough time decreased as the initial metal concentration increased from 50 to 300 mg L-1. The column was regenerated using 0.1M HCl solution and biosorptiondesorption studies were carried out for 2 cycles. The results showed that the breakthrough time decreased as the number of cycle was proceeded.
    Matched MeSH terms: Pycnoporus
  8. Mohamad Hsnul Bolhassan, Noorlidah Abdullah, Vikineswary Sabartnam, Hattori Tsutomu, Sumaiyah Abdullah, Noraswati Mohd Noor Rashid, et al.
    Sains Malaysiana, 2012;41:155-161.
    Macrofungi of the order Polyporales are among the most important wood decomposers and caused economic losses by decaying the wood in standing trees, logs and in sawn timber. Diversity and distribution of Polyporales in Peninsular Malaysia was investigated by collecting basidiocarps from trunks, branches, exposed roots and soil from six states (Johor, Kedah, Kelantan, Negeri Sembilan, Pahang and Selangor) in Peninsular Malaysia and Federal Territory Kuala Lumpur. This study showed that the diversity of Polyporales were less diverse than previously reported. The study identified 60 species from five families; Fomitopsidaceae, Ganodermataceae, Meruliaceae, Meripilaceae, and Polyporaceae. The common species of Polyporales collected were Fomitopsis feei, Amauroderma subrugosum, Ganoderma australe, Earliella scabrosa, Lentinus squarrosulus, Microporus xanthopus, Pycnoporus sanguineus and Trametes menziesii.
    Matched MeSH terms: Pycnoporus
  9. Naidu Y, Siddiqui Y, Idris AS
    J Environ Manage, 2020 Apr 01;259:110056.
    PMID: 31929034 DOI: 10.1016/j.jenvman.2019.110056
    The disposal of oil palm biomass is a huge challenge in Malaysian oil palm plantations. The aim of this study was to develop efficient solid-state cultivated (SSC) ligno-hemicellulolytic bio-degrader formulations of indigenous white-rot hymenomycetes (Trametes lactinea FBW and Pycnoporus sanguineus FBR) utilizing oil palm empty fruit bunches (EFB), rubber wood sawdust (SD) and vermiculite (V) either alone or in combination as substrates. Based on significant laccase (849.40 U mg-1 protein), xylanase (42.26 U g-1 protein) and amylase (157.49 U g-1 protein) production, SD+V (T5) and V (T3) were the optimum substrates for SSC of T. lactinea FBW. Whereas, utilizing EFB (T1) substrate for SSC of P. sanguineus FBR enhanced the production of MnP (42.51 U mg-1 protein), LiP (103.20 U mg-1 protein) and CMCase (34.39 U g-1 protein), enzymes. Apparently, this is the first study reporting on the protein profiles by T. lactinea FBW, producing two isoforms of un-purified laccase (~55 and 70 kDa) and MnP (~40 and 60 kDa) and a CMCase band (~60 kDa) during SSC on SD+V (T5) substrate. Interestingly, this is also the first report to document a single isoform of un-purified laccase (~50 kDa), MnP (~45 kDa), CMCase (~60 kDa) and xylanase (~55 kDa) by P. sanguineus FBR during SSC on empty fruit bunches substrate. The computed Principal Component Analysis (PCA) Biplot analysis elucidated the relationship between the solid substrate compositions, the hymenomycete strain, ligno-hemicellulolytic enzyme profiles, and cultivation time. Therefore, it is suggested to use PCA as a tool for multivariate analysis method for comprehensive selection and optimization of ligno-hemicellulolytic enzyme cocktails by the indigenous white rot hymenomycetes. These non-toxic (acute oral toxicity) formulations are safe to be used in field applications to efficiently degrade oil palm trunks and root mass that had been felled, chipped or pulverized under zero burning waste management program. This study could also serve as an alternative method for efficient utilization of agro-industrial waste as substrates for the development of cost-effective bio-degraders formulations for agro-waste management.
    Matched MeSH terms: Pycnoporus
  10. Chan YS, Mat Don M
    Mater Sci Eng C Mater Biol Appl, 2013 Jan 1;33(1):282-8.
    PMID: 25428073 DOI: 10.1016/j.msec.2012.08.041
    Five species of white rot fungi were screened for their capability to synthesize Ag nanoparticles (AgNPs). Three modes of AgNP bioreduction were developed. Pycnoporus sanguineus is found as a potential candidate for the synthesis of AgNPs with a yield at 98.9%. The synthesized AgNPs were characterized using UV-vis spectroscopy, DLS, FTIR, TEM, and SEM. Results showed that AgNP absorption band was located at a peak of 420 nm. Both the SEM and TEM confirmed that the formation of AgNPs were mainly spherical with average diameters of 52.8-103.3 nm. The signals of silver atoms' presence in the mycelium were observed by SEM-EDS spectrum.
    Matched MeSH terms: Pycnoporus/metabolism
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links