Displaying publications 1 - 20 of 40 in total

Abstract:
Sort:
  1. Ab Rahman A, Ab Rahman R, Ibrahim MI, Salleh H, Ismail SB, Ali SH, et al.
    PMID: 21706952
    The objectives of this study were to describe the knowledge of sexual and reproductive health among adolescents attending school and to compare the levels of knowledge between males and females and between older and younger groups of adolescents. A cross-sectional study was conducted among 1,034 secondary school students using a self administered validated questionnaire. The items with the fewest correct responses included: whether one can get pregnant after a single act of sexual intercourse (30.4%), whether sexual intercourse causes sexually transmitted diseases (STDs) (12.4%) and whether washing the vagina after sexual intercourse prevents pregnancy (17.0%). Their main source of sexual information was friends (64.4%). An independent t-test revealed the mean knowledge score was significantly higher among females than males on items assessing whether the genitalia may be touched freely by family members, females having attained menarche may become pregnant if having sex, whether pregnancy will occur if there is penetration of the penis into the vagina, whether premarital sexual intercourse causes pregnancy and if there is a relationship between abandoned babies and premarital pregnancies. The mean knowledge score assessing whether pregnancy can be prevented using condoms was higher among males than females. The mean knowledge scores were significantly higher among form four and form five students than forms one, two and three students. Lack of knowledge regarding important aspects of sexual and reproductive health warrant the need to strengthen sexual and reproductive health education.
  2. Abas A, Gan ZL, Ishak MH, Abdullah MZ, Khor SF
    PLoS One, 2016;11(7):e0159357.
    PMID: 27454872 DOI: 10.1371/journal.pone.0159357
    This paper studies the three dimensional (3D) simulation of fluid flows through the ball grid array (BGA) to replicate the real underfill encapsulation process. The effect of different solder bump arrangements of BGA on the flow front, pressure and velocity of the fluid is investigated. The flow front, pressure and velocity for different time intervals are determined and analyzed for potential problems relating to solder bump damage. The simulation results from Lattice Boltzmann Method (LBM) code will be validated with experimental findings as well as the conventional Finite Volume Method (FVM) code to ensure highly accurate simulation setup. Based on the findings, good agreement can be seen between LBM and FVM simulations as well as the experimental observations. It was shown that only LBM is capable of capturing the micro-voids formation. This study also shows an increasing trend in fluid filling time for BGA with perimeter, middle empty and full orientations. The perimeter orientation has a higher pressure fluid at the middle region of BGA surface compared to middle empty and full orientation. This research would shed new light for a highly accurate simulation of encapsulation process using LBM and help to further increase the reliability of the package produced.
  3. Abas A, Mokhtar NH, Ishak MH, Abdullah MZ, Ho Tian A
    Comput Math Methods Med, 2016;2016:6143126.
    PMID: 27239221 DOI: 10.1155/2016/6143126
    This paper simulates and predicts the laminar flow inside the 3D aneurysm geometry, since the hemodynamic situation in the blood vessels is difficult to determine and visualize using standard imaging techniques, for example, magnetic resonance imaging (MRI). Three different types of Lattice Boltzmann (LB) models are computed, namely, single relaxation time (SRT), multiple relaxation time (MRT), and regularized BGK models. The results obtained using these different versions of the LB-based code will then be validated with ANSYS FLUENT, a commercially available finite volume- (FV-) based CFD solver. The simulated flow profiles that include velocity, pressure, and wall shear stress (WSS) are then compared between the two solvers. The predicted outcomes show that all the LB models are comparable and in good agreement with the FVM solver for complex blood flow simulation. The findings also show minor differences in their WSS profiles. The performance of the parallel implementation for each solver is also included and discussed in this paper. In terms of parallelization, it was shown that LBM-based code performed better in terms of the computation time required.
  4. Abdul SN, Ab Mutalib NS, Sean KS, Syafruddin SE, Ishak M, Sagap I, et al.
    Front Pharmacol, 2017;8:465.
    PMID: 28769798 DOI: 10.3389/fphar.2017.00465
    Despite global progress in research, improved screening and refined treatment strategies, colorectal cancer (CRC) remains as the third most common malignancy. As each type of cancer is different and exhibits unique alteration patterns, identifying and characterizing gene alterations in CRC that may serve as biomarkers might help to improve diagnosis, prognosis and predict potential response to therapy. With the emergence of next generation sequencing technologies (NGS), it is now possible to extensively and rapidly identify the gene profile of individual tumors. In this study, we aimed to identify actionable somatic alterations in Dukes' B and C in CRC via NGS. Targeted sequencing of 409 cancer-related genes using the Ion Ampliseq(TM) Comprehensive Cancer Panel was performed on genomic DNA obtained from paired fresh frozen tissues, cancer and normal, of Dukes' B (n = 10) and Dukes' C (n = 9) CRC. The sequencing results were analyzed using Torrent Suite, annotated using ANNOVAR and validated using Sanger sequencing. A total of 141 somatic non-synonymous sequence variations were identified in 86 genes. Among these, 64 variants (45%) were predicted to be deleterious, 38 variants (27%) possibly deleterious while the other 39 variants (28%) have low or neutral protein impact. Seventeen genes have alterations with frequencies of ≥10% in the patient cohort and with 14 overlapped genes in both Dukes' B and C. The adenomatous polyposis coli gene (APC) was the most frequently altered gene in both groups (n = 6 in Dukes' B and C). In addition, TP53 was more frequently altered in Dukes' C (n = 7) compared to Dukes' B (n = 4). Ten variants in APC, namely p.R283(∗), p.N778fs, p.R805(∗), p.Y935fs, p.E941fs, p.E1057(∗), p.I1401fs, p.Q1378(∗), p.E1379(∗), and p.A1485fs were predicted to be driver variants. APC remains as the most frequently altered gene in the intermediate stages of CRC. Wnt signaling pathway is the major affected pathway followed by P53, RAS, TGF-β, and PI3K signaling. We reported the alteration profiles in each of the patient which has the potential to affect the clinical decision. We believe that this study will add further to the understanding of CRC molecular landscape.
  5. Abdullah N, Abdul Murad NA, Attia J, Oldmeadow C, Mohd Haniff EA, Syafruddin SE, et al.
    Diabet Med, 2015 Oct;32(10):1377-84.
    PMID: 25711284 DOI: 10.1111/dme.12735
    AIMS: To characterize the association with Type 2 diabetes of known Type 2 diabetes risk variants in people in Malaysia of Malay, Chinese and Indian ancestry who participated in the Malaysian Cohort project.
    METHODS: We genotyped 1604 people of Malay ancestry (722 cases, 882 controls), 1654 of Chinese ancestry (819 cases, 835 controls) and 1728 of Indian ancestry (851 cases, 877 controls). First, 62 candidate single-nucleotide polymorphisms previously associated with Type 2 diabetes were assessed for association via logistic regression within ancestral groups and then across ancestral groups using a meta-analysis. Second, estimated odds ratios were assessed for excess directional concordance with previously studied populations. Third, a genetic risk score aggregating allele dosage across the candidate single-nucleotide polymorphisms was tested for association within and across ancestral groups.
    RESULTS: After Bonferroni correction, seven individual single-nucleotide polymorphisms were associated with Type 2 diabetes in the combined Malaysian sample. We observed a highly significant excess in concordance of effect directions between Malaysian and previously studied populations. The genetic risk score was strongly associated with Type 2 diabetes in all Malaysian groups, explaining from 1.0 to 1.7% of total Type 2 diabetes risk variance.
    CONCLUSION: This study suggests there is substantial overlap of the genetic risk alleles underlying Type 2 diabetes in Malaysian and other populations.
    Study name: The Malaysian Cohort (TMC) project
  6. Abdullah N, Abdul Murad NA, Mohd Haniff EA, Syafruddin SE, Attia J, Oldmeadow C, et al.
    Public Health, 2017 Aug;149:31-38.
    PMID: 28528225 DOI: 10.1016/j.puhe.2017.04.003
    OBJECTIVE: Malaysia has a high and rising prevalence of type 2 diabetes (T2D). While environmental (non-genetic) risk factors for the disease are well established, the role of genetic variations and gene-environment interactions remain understudied in this population. This study aimed to estimate the relative contributions of environmental and genetic risk factors to T2D in Malaysia and also to assess evidence for gene-environment interactions that may explain additional risk variation.
    STUDY DESIGN: This was a case-control study including 1604 Malays, 1654 Chinese and 1728 Indians from the Malaysian Cohort Project.
    METHODS: The proportion of T2D risk variance explained by known genetic and environmental factors was assessed by fitting multivariable logistic regression models and evaluating McFadden's pseudo R(2) and the area under the receiver-operating characteristic curve (AUC). Models with and without the genetic risk score (GRS) were compared using the log likelihood ratio Chi-squared test and AUCs. Multiplicative interaction between genetic and environmental risk factors was assessed via logistic regression within and across ancestral groups. Interactions were assessed for the GRS and its 62 constituent variants.
    RESULTS: The models including environmental risk factors only had pseudo R(2) values of 16.5-28.3% and AUC of 0.75-0.83. Incorporating a genetic score aggregating 62 T2D-associated risk variants significantly increased the model fit (likelihood ratio P-value of 2.50 × 10(-4)-4.83 × 10(-12)) and increased the pseudo R(2) by about 1-2% and AUC by 1-3%. None of the gene-environment interactions reached significance after multiple testing adjustment, either for the GRS or individual variants. For individual variants, 33 out of 310 tested associations showed nominal statistical significance with 0.001 
  7. Abu N, Rus Bakarurraini NAA, Nasir SN, Ishak M, Baharuddin R, Jamal R, et al.
    Iran J Immunol, 2023 Mar 14;20(1):83-91.
    PMID: 36932973 DOI: 10.22034/iji.2023.92600.2171
    BACKGROUND: Cancer testis antigens (CTAs) are a class of immune-stimulating antigens often overexpressed in many types of cancers. The usage of the CTAs as immunotherapy targets have been widely investigated in different cancers including melanoma, hematological malignancies, and colorectal cancer. Studies have indicated that the epigenetic regulation of the CTAs such as the methylation status may affect the expression of the CTAs. However, the report on the methylation status of the CTAs is conflicting. The general methylation profile of the CTAs, especially in colorectal cancer, is still elusive.

    OBJECTIVE: To determine the methylation profile of the selected CTAs in our colorectal cancer patients.

    METHODS: A total of 54 pairs of colorectal cancer samples were subjected to DNA methylation profiling using the Infinium Human Methylation 450K bead chip.

    RESULTS: We found that most of the CTAs were hypomethylated, and CCNA1 and TMEM108 genes were among the few CTAs that were hypermethylated.

    CONCLUSION: Overall, our brief report has managed to show the overall methylation profile in over the 200 CTAs in colorectal cancer and this could be used for further refining any immunotherapy targets.

  8. Abubakar U, Zulkarnain AI, Samri F, Hisham SR, Alias A, Ishak M, et al.
    BMC Complement Med Ther, 2020 Sep 18;20(1):285.
    PMID: 32948163 DOI: 10.1186/s12906-020-03082-4
    BACKGROUND: Dysmenorrhea is a common problem that affects female students' quality of life and academic activities. Complementary and alternative therapies (CATs) are used for the treatment of dysmenorrhea. This study investigated the practices and perceptions of female undergraduate students with dysmenorrhea towards CATs.

    METHODS: This was a cross-sectional study conducted among undergraduate pharmacy students in a public university in Malaysia using a validated and pre-tested self-administered questionnaire. The study was conducted in November and December 2019. The data was analysed using descriptive and inferential statistical tests.

    RESULTS: Of the 318 female undergraduate students invited, 219 completed the questionnaire (response rate: 68.9%) with 52% aged between 21 and 23 years. The prevalence of dysmenorrhea was 72.1%, and the prevalence of ever-use and current use of CATs was 70.3 and 54.4%, respectively. Bed rest (71.5%), hot compress/heating pad (47.5%) and massage (43.0%) were the most common CATs used by the respondents. The most common reasons for using CAT were to reduce the need for analgesics (61.4%), efficacy (37.3%) and recommendation by others (32.9%). About 23 and 9% of the respondents believed that CATs were equally "effective" and "more effective" than analgesics, respectively. Reducing the need for analgesics (AOR: 4.066, 95% CI: 2.136-7.739) and those who agreed that CATs are effective (AOR: 2.701, 95% CI: 1.337-5.457) were independently associated with the current use CATs for the treatment of menstrual pain.

    CONCLUSION: The prevalence of ever-use and current use of CATs is high among female undergraduate pharmacy students. Bed rest and heat applications are the most common CATs used. Reducing the need for analgesics and efficacy are the factors associated with the current use of CATs. Students should be educated about the safe and effective use of CATs to reduce adverse effects and improve their quality of life.

  9. Alsubari S, Zuhri MYM, Sapuan SM, Ishak MR, Ilyas RA, Asyraf MRM
    Polymers (Basel), 2021 Jan 28;13(3).
    PMID: 33525703 DOI: 10.3390/polym13030423
    The interest in using natural fiber reinforced composites is now at its highest. Numerous studies have been conducted due to their positive benefits related to environmental issues. Even though they have limitations for some load requirements, this drawback has been countered through fiber treatment and hybridization. Sandwich structure, on the other hand, is a combination of two or more individual components with different properties, which when joined together can result in better performance. Sandwich structures have been used in a wide range of industrial material applications. They are known to be lightweight and good at absorbing energy, providing superior strength and stiffness-to-weight ratios, and offering opportunities, through design integration, to remove some components from the core element. Today, many industries use composite sandwich structures in a range of components. Through good design of the core structure, one can maximize the strength properties, with a low density. However, the application of natural fiber composites in sandwich structures is still minimal. Therefore, this paper reviewed the possibility of using a natural fiber composite in sandwich structure applications. It addressed the mechanical properties and energy-absorbing characteristics of natural fiber-based sandwich structures tested under various compression loads. The results and potential areas of improvement to fit into a wide range of engineering applications were discussed.
  10. Asyraf MRM, Ishak MR, Norrrahim MNF, Nurazzi NM, Shazleen SS, Ilyas RA, et al.
    Int J Biol Macromol, 2021 Dec 15;193(Pt B):1587-1599.
    PMID: 34740691 DOI: 10.1016/j.ijbiomac.2021.10.221
    Biocomposites are materials that are easy to manufacture and environmentally friendly. Sugar palm fibre (SPF) is considered to be an emerging reinforcement candidate that could provide improved mechanical stiffness and strength to the biocomposites. Numerous studies have been recently conducted on sugar palm biocomposites to evaluate their physical, mechanical and thermal properties in various conditions. Sugar palm biocomposites are currently limited to the applications of traditional household products despite their good thermal stability as a prospective substitute candidate for synthetic fibres. Thus, thermal analysis methods such as TGA and DTG are functioned to determine the thermal properties of single fibre sugar palm composites (SPCs) in thermoset and thermoplastic matrix as well as hybrid SPCs. The biocomposites showed a remarkable change considering thermal stability by varying the individual fibre compositions and surface treatments and adding fillers and coupling agents. However, literature that summarises the thermal properties of sugar palm biocomposites is unavailable. Particularly, this comprehensive review paper aims to guide all composite engineers, designers, manufacturers and users on the selection of suitable biopolymers for sugar palm biocomposites for thermal applications, such as heat shields and engine components.
  11. Azami NAM, Perera D, Thayan R, AbuBakar S, Sam IC, Salleh MZ, et al.
    Int J Infect Dis, 2022 Dec;125:216-226.
    PMID: 36336246 DOI: 10.1016/j.ijid.2022.10.044
    OBJECTIVES: This study reported SARS-CoV-2 whole genome sequencing results from June 2021 to January 2022 from seven genome sequencing centers in Malaysia as part of the national surveillance program.

    METHODS: COVID-19 samples that tested positive by reverse transcription polymerase chain reaction and with cycle threshold values <30 were obtained throughout Malaysia. Sequencing of SARS-CoV-2 complete genomes was performed using Illumina, Oxford Nanopore, or Ion Torrent platforms. A total of 6163 SARS-CoV-2 complete genome sequences were generated over the surveillance period. All sequences were submitted to the Global Initiative on Sharing All Influenza Data database.

    RESULTS: From June 2021 to January 2022, Malaysia experienced the fourth wave of COVID-19 dominated by the Delta variant of concern, including the original B.1.617.2 lineage and descendant AY lineages. The B.1.617.2 lineage was identified as the early dominant circulating strain throughout the country but over time, was displaced by AY.59 and AY.79 lineages in Peninsular (west) Malaysia, and the AY.23 lineage in east Malaysia. In December 2021, pilgrims returning from Saudi Arabia facilitated the introduction and spread of the BA.1 lineage (Omicron variant of concern) in the country.

    CONCLUSION: The changing trends of circulating SARS-CoV-2 lineages were identified, with differences observed between west and east Malaysia. This initiative highlighted the importance of leveraging research expertise in the country to facilitate pandemic response and preparedness.

  12. Azman MA, Asyraf MRM, Khalina A, Petrů M, Ruzaidi CM, Sapuan SM, et al.
    Polymers (Basel), 2021 Jun 09;13(12).
    PMID: 34207597 DOI: 10.3390/polym13121917
    Natural fibers have attracted great attention from industrial players and researchers for the exploitation of polymer composites because of their "greener" nature and contribution to sustainable practice. Various industries have shifted toward sustainable technology in order to improve the balance between the environment and social and economic concerns. This manuscript aims to provide a brief review of the development of the foremost natural fiber-reinforced polymer composite (NFRPC) product designs and their applications. The first part of the manuscript presents a summary of the background of various natural fibers and their composites in the context of engineering applications. The behaviors of NFPCs vary with fiber type, source, and structure. Several drawbacks of NFPCs, e.g., higher water absorption rate, inferior fire resistance, and lower mechanical properties, have limited their applications. This has necessitated the development of good practice in systematic engineering design in order to attain optimized NRPC products. Product design and manufacturing engineering need to move in a mutually considerate manner in order to produce successful natural fiber-based composite material products. The design process involves concept design, material selection, and finally, the manufacturing of the design. Numerous products have been commercialized using natural fibers, e.g., sports equipment, musical instruments, and electronic products. In the end, this review provides a guideline for the product design process based on natural fibers, which subsequently leads to a sustainable design.
  13. Chan KM, Rajab NF, Ishak MH, Ali AM, Yusoff K, Din LB, et al.
    Chem Biol Interact, 2006 Feb 1;159(2):129-40.
    PMID: 16297902
    Restenosis represents a major impediment to the success of coronary angioplasty. Abnormal proliferation of vascular smooth muscle cells (VSMCs) has been shown to be an important process in the pathogenesis of restenosis. A number of agents, particularly rapamycin and paclitaxel, have been shown to impact on this process. This study was carried out to determine the mechanisms of cytotoxicity of goniothalamin (GN) on VSMCs. Results from MTT cytotoxicity assay showed that the IC(50) for GN was 4.4 microg/ml (22 microM), which was lower compared to the clinically used rapamycin (IC(50) of 25 microg/ml [27.346 microM]). This was achieved primarily via apoptosis where up to 25.83 +/- 0.44% of apoptotic cells were detected after 72 h treatment with GN. In addition, GN demonstrated similar effects as rapamycin in inhibiting VSMCs proliferation using bromodeoxyuridine (BrdU) cell proliferation assay after 72 h treatment at IC(50) concentration (p > 0.05). In order to understand the mechanisms of GN, DNA damage detection using comet assay was determined at 2h post-treatment with GN. Our results showed that there was a concentration-dependent increase in DNA damage in VSMCs prior to cytotoxicity. Moreover, GN effects were comparable to rapamycin. In conclusion, our data show that GN initially induces DNA damage which subsequently leads to cytotoxicity primarily via apoptosis in VSMCs.
  14. Che Maraina CH, Kamaliah MD, Ishak M
    Asian Pac J Allergy Immunol, 2002 Dec;20(4):279-82.
    PMID: 12744629
    Anti-nuclear antibody (ANA) negative systemic lupus erythematosus (SLE) occurs in about 4-13% of SLE cases. A small group of ANA negative SLE patients with positive anti-Ro antibodies usually present with typical vasculitic skin lesions which can be associated with photosensitivity, renal disease, congenital heart block or neonatal lupus. We present a case of a persistently ANA negative patient who presented with joint pain, rashes, mouth ulcer and alopecia. Clinical diagnosis of systemic lupus erythematosus was made even though ANA was negative. She was started on steroids and went into remission. Later, she developed several episodes of convulsions associated with fever and prominent vasculitic lesions. The patient was also found to have microscopic hematuria, proteinuria, anemia and thrombocytopenia. Renal biopsy showed lupus nephritis class 1B. Due to the prominent skin lesions, we performed anti-extractable nuclear antigens (ENA) antibodies test and anti-Ro turned out to be positive. The final diagnosis was ANA negative SLE (Ro lupus) with cutaneous, renal, musculoskeletal, hematological and cerebral Involvement.
  15. Farma R, Deraman M, Awitdrus A, Talib IA, Taer E, Basri NH, et al.
    Bioresour Technol, 2013 Mar;132:254-61.
    PMID: 23411456 DOI: 10.1016/j.biortech.2013.01.044
    Fibres from oil palm empty fruit bunches, generated in large quantities by palm oil mills, were processed into self-adhesive carbon grains (SACG). Untreated and KOH-treated SACG were converted without binder into green monolith prior to N2-carbonisation and CO2-activation to produce highly porous binderless carbon monolith electrodes for supercapacitor applications. Characterisation of the pore structure of the electrodes revealed a significant advantage from combining the chemical and physical activation processes. The electrochemical measurements of the supercapacitor cells fabricated using these electrodes, using cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic charge-discharge techniques consistently found that approximately 3h of activation time, achieved via a multi-step heating profile, produced electrodes with a high surface area of 1704m(2)g(-1) and a total pore volume of 0.889cm(3)g(-1), corresponding to high values for the specific capacitance, specific energy and specific power of 150Fg(-1), 4.297Whkg(-1) and 173Wkg(-1), respectively.
  16. Hamid MF, Idroas MY, Ishak MZ, Zainal Alauddin ZA, Miskam MA, Abdullah MK
    Biomed Res Int, 2016;2016:1679734.
    PMID: 27419127 DOI: 10.1155/2016/1679734
    Torrefaction process of biomass material is essential in converting them into biofuel with improved calorific value and physical strength. However, the production of torrefied biomass is loose, powdery, and nonuniform. One method of upgrading this material to improve their handling and combustion properties is by densification into briquettes of higher density than the original bulk density of the material. The effects of critical parameters of briquetting process that includes the type of biomass material used for torrefaction and briquetting, densification temperature, and composition of binder for torrefied biomass are studied and characterized. Starch is used as a binder in the study. The results showed that the briquette of torrefied rubber seed kernel (RSK) is better than torrefied palm oil shell (POS) in both calorific value and compressive strength. The best quality of briquettes is yielded from torrefied RSK at the ambient temperature of briquetting process with the composition of 60% water and 5% binder. The maximum compressive load for the briquettes of torrefied RSK is 141 N and the calorific value is 16 MJ/kg. Based on the economic evaluation analysis, the return of investment (ROI) for the mass production of both RSK and POS briquettes is estimated in 2-year period and the annual profit after payback was approximately 107,428.6 USD.
  17. Houkin K, Fukuhara S, Selladurai BM, Zurin AA, Ishak M, Kuroda S, et al.
    Neurol. Med. Chir. (Tokyo), 1999 Oct;39(11):773-7; discussion 777-8.
    PMID: 10598447
    A new image transmission and teleconference system using international digital telephone services was established between Japan and Malaysia. This new system consists of an ordinary personal computer, image scanner, and terminal adapter for digital telephone lines. The quality of images transferred using this system was high enough for diagnosis and discussion except for images such as radiographs requiring huge data transfer. Transmission of one image took approximately 20 seconds. The cost performance was almost equal to the conventional mailing system. The most remarkable advantage of this new system is the high quality of transferred images, the cost and time performance, and security of the medical information. New communication systems using international digital networks including the internet may allow re-distribution of medical resources between advanced countries and developing countries in neurosurgery.
  18. Hugé J, Vande Velde K, Benitez-Capistros F, Japay JH, Satyanarayana B, Nazrin Ishak M, et al.
    J Environ Manage, 2016 Dec 01;183(Pt 3):988-997.
    PMID: 27692515 DOI: 10.1016/j.jenvman.2016.09.046
    The sustainable management of natural resources requires the consideration of multiple stakeholders' perspectives and knowledge claims, in order to inform complex and possibly contentious decision-making dilemmas. Hence, a better understanding of why people in particular contexts do manage natural resources in a particular way is needed. Focusing on mangroves, highly productive tropical intertidal forests, this study's first aim is to map the diversity of subjective viewpoints among a range of stakeholders on the management of Matang Mangrove Forest in peninsular Malaysia. Secondly, this study aims to feed the reflection on the possible consequences of the diversity of perspectives for the future management of mangroves in Malaysia and beyond. The use of the semi-quantitative Q methodology allowed us to identify three main discourses on mangrove management: i. the optimization discourse, stressing the need to improve the current overall satisfactory management regime; ii. the 'change for the better' discourse, which focuses on increasingly participatory management and on ecotourism; and iii. the conservative 'business as usual' discourse. The existence of common points of connection between the discourses and their respective supporters provides opportunities for modifications of mangrove management regimes. Acknowledging this diversity of viewpoints, reflecting how different stakeholders see and talk about mangrove management, highlights the need to develop pro-active and resilient natural resource management approaches.
  19. Ilyas RA, Sapuan SM, Ishak MR, Zainudin ES
    Carbohydr Polym, 2018 Dec 15;202:186-202.
    PMID: 30286991 DOI: 10.1016/j.carbpol.2018.09.002
    Sugar palm fibre (SPF) was treated with NaClO2, bleached with NaOH and subsequently hydrolyzed with acid to obtain sugar palm nanocrystalline cellulose (SPNCCs). Bionanocomposites in the form of films were prepared by mixing sugar palm starch (SPS) and sorbitol/glycerol with different nanofiller SPNCCs compositions (0-1.0 wt%) using solution casting method. The resulting fibres and nanocomposites were characterized in terms of morphology (FESEM and TEM), footprint, crystallinity (XRD), light transmittance, biodegradability, physical, water barrier, thermal (TGA, DSC and DMA) and mechanical properties. The length (L), diameter (D) and L/D values of the SPNCCs were 130 ± 30.23, 8.5 ± 1.82 nm, and 15.3, respectively. The SPS/SPNCCs nanocomposite films exhibited higher crystallinity, tensile strength, Young's modulus, thermal and water-resistance compared to the neat SPS film. The results showed that the tensile strength and moduli of the bionanocomposites increased after being reinforced with SPNCCs and the optimum nanofiller content was 0.5%.
  20. Ilyas RA, Sapuan SM, Ishak MR, Zainudin ES
    Int J Biol Macromol, 2019 Feb 15;123:379-388.
    PMID: 30447353 DOI: 10.1016/j.ijbiomac.2018.11.124
    Nanofibrillated cellulose (NFCs) were extracted from sugar palm fibres (SPS) in two separate stages; delignification and mercerization to remove lignin and hemicellulose, respectively. Subsequently, the obtained cellulose fibres were then mechanically extracted into nanofibres using high pressurized homogenization (HPH). The diameter distribution sizes of the isolated nanofibres were dependent on the cycle number of HPH treatment. TEM micro-images displayed the decreasing trend of NFCs diameter, from 21.37 to 5.5 nm when the number of cycle HPH was increased from 5 to 15 cycles, meanwhile TGA and XRD analysis showed that the degradation temperature and crystallinity of the NFCs were slightly increased from 347 to 347.3 °C and 75.38 to 81.19% respectively, when the number of cycles increased. Others analysis also were carried on such as FT-IR, FESEM, AFM, physical properties, zeta potential and yield analysis. The isolated NFCs may be potentially applied in various application, such as tissue engineering scaffolds, bio-nanocomposites, filtration media, bio-packaging and etc.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links