Displaying publications 1 - 20 of 81 in total

Abstract:
Sort:
  1. Zainuddin N, Saleh H, Hashim I, Roslan R
    Sains Malaysiana, 2016;45:315-321.
    Effects of radiation on free convection about a heated horizontal circular cylinder in the presence of heat generation is investigated numerically. The cylinder is fixed and immersed in a stationary fluid, in which the temperature is uniformly heated about the temperature of the surrounding fluid. The governing equations are transformed into dimensionless non-linear partial differential equations and solved by employing a finite difference method. An implicit finite difference scheme of Crank Nicolson method is used to analyze the results. This study determined the effects of radiation parameter, heat generation parameter, and the Prandtl number, on the temperature and velocity profiles. The results of the local heat transfer and skin-friction coefficient in the presence of radiation for some selected values of and are shown graphically.
    Matched MeSH terms: Clothing
  2. Zainab Shakir Radif, Aidy Ali, Khalina Abdan
    MyJurnal
    This study was conducted for the development of the green protection garments. For this purpose, laminate composite material was developed from Kevlar 29-ramie-unsaturated polyester resin. The aim of this study was to develop a solid body armour that meets the specific requirements of ballistic resistance. This composite is subjected to high impact loading. The target was shot using gas gun machine that is supported by camera hardware to capture the projectile speed. In order to achieve the goal of the research, several experiments were conducted with the aim to estimate the ballistic limit, maximum energy absorption, composite failure mode, life time rupture, target geometry, and environmental effect. The results of these experiments indicated that the maximum ballistic limit validated at impact speed is in the range of 250 m/s to 656.8 m/s for the second protection level. The targets are improved in term of the impact response with the increase in the relative humidity, i.e. the range of 50% ± 20%, whereas, reduction of resistance results in the increase of temperature. The range of temperatures was between 20oC and 70oC. A limited delamination was generated under multiple shots. Targets geometry plays a major role in increasing the impact response. Hence, the results present a high resistant impact for pairs from the panels with total thickness arrived to 15
    mm ± 3 mm. This body armour is one of the most economical armour products, in which common materials are used in its production, particularly to reduce the amount of Kevlar, and this could further lead to a decrease in its production cost. On the other hand, this armour meets the ballistic threats under 623 m/s of 15 mm ± 3 mm target thickness and 837.5 m/s of 25 mm ± 2.mm. Thus, the armour is equivalent to the third level of protective ballistic limits in the National Institute of Justice (NIJ) standards.
    Matched MeSH terms: Clothing
  3. Zahrina AZ, Haymond P, Rosanna P, Ho R, Rajini AR, Low BT, et al.
    Malays Fam Physician, 2018;13(3):3-11.
    PMID: 30800227
    INTRODUCTION: With increasing evidence of disease transmission through doctors' white coats, many countries have discouraged doctors from wearing their white coats during consultations. However, there have been limited studies about patients' preferences concerning doctors' attire in Malaysia. This study, therefore, aimed to investigate patients' perceptions of doctors' attire before and after the disclosure of information about the infection risk associated with white coats.
    METHOD: This cross-sectional study was conducted from 1st June 2015 to 31st July 2015 at three different primary care settings (government, private, and university primary care clinics) using a self-administered questionnaire. A 1:5 systematic random sampling method was employed to select the participants. The respondents were shown photographs of male and female doctors in four different types of attire and asked to rate their level of confidence and trust in and ease with doctors in each type of attire. Subsequently, the respondents were informed of the risk of white coat-carried infections, and their responses were reevaluated. Data analysis was completed using SPSS Version 24.0. Associations of categorical data were assessed using the Chi-Square test, while the overall change in perceptions after the disclosure of additional information was examined using the McNemar test. Results with p-values < 0.05 were considered statistically significant.
    RESULTS: A total of 299 respondents completed the questionnaire. Most of the respondents had more confidence and trust in the male (62.5%) and female (59.2%) doctors wearing white coats. A high proportion of the respondents from the government clinic (70.5%) felt more confidence in male doctors dressed in white coats (p-value = 0.018). In terms of ethnicity, male doctors in white coats were highly favored by Malays (61.0%), followed by the Chinese (41.2%) and Indians (38%) (p = 0.005). A similar preference was observed for the female doctors, whereby the highest number of Malays (60.3%), followed by the Chinese (41.2%) and Indians (40.0%) (p = 0.006), had a preference for female doctors wearing white coats. Only 21.9% of the initial 71.9% of patients who preferred white coats maintained their preference (p < 0.001) after learning of the risk of microbial contamination associated with white coats.
    CONCLUSION: Most patients preferred that primary care doctors wear white coats. Nevertheless, that perception changed after they were informed about the infection risk associated with white coats.
    Matched MeSH terms: Clothing
  4. Yong SS, Han WH, Faheem NAA, Puvan N, Tan LL, Wong SM, et al.
    Photodermatol Photoimmunol Photomed, 2022 Nov;38(6):541-547.
    PMID: 35324018 DOI: 10.1111/phpp.12787
    BACKGROUND: Airline pilots face significant ultraviolet radiation exposure resulting in an increased risk of sun damage and skin cancers. We aimed to evaluate sun-protective practices and associated factors among airline pilots.

    METHODS: We disseminated an online questionnaire evaluating the use of sunscreen, sunglasses, hats and protective clothing during daytime hours in the cockpit and during outdoor activities to 346 global commercial airline pilots, and we received 220 completed responses. The Pearson chi-squared test or Fisher's exact test where necessary were used to determine possible factors associated with the use of sun-protective practices. Potential confounders were adjusted for using multivariate analyses.

    RESULTS: The most common sun protective behaviour was the wearing of sunglasses during daytime flights (89.5%), followed by the use of caps during outdoor activities (47.7%). More pilots applied sunscreen during daytime flights (14.1%) compared with walk-arounds (8.2%). Males were less likely to use sunscreen during flights (adjusted odds ratio, aOR = 0.76), use sunscreen for walk-arounds (aOR = 0.175) and wear long sleeves (aOR = 0.013). Pilots who flew less than 30 h a month in high latitude regions were less likely to use a cap or hat outdoors (aOR = 0.419) or use sunscreen during walk-arounds (aOR = 0.241). Younger pilots were also less likely to use caps or hats outdoors (aOR = 0.446).

    CONCLUSION: Male pilots and those who spent less time in high latitudes were less likely to practice sun protection. Targeted educational efforts may be implemented to reduce occupational ultraviolet exposure.

    Matched MeSH terms: Protective Clothing
  5. Woo JM, Tam CL, Bonn GB, Tagg B
    Front Psychol, 2020;11:1871.
    PMID: 32849098 DOI: 10.3389/fpsyg.2020.01871
    The national school uniform remained a requirement for all primary and secondary school students in Malaysia since its first introduction by the British missionaries in the nineteenth century. Although it is commonly thought that wearing uniforms improve cohesion among students, little research has been done to investigate the perception of national school uniforms and perceived cohesion among Malaysian students. The aim of the current study is to explore the experiences of former students, teachers and school counselors in relation to Malaysia's national school uniform policy, their influence on student life, and their relationship to school and national cohesion. Three studies were conducted. In Study 1, Malaysian secondary school graduates (N = 192) completed a self-report questionnaire with close and open-ended questions. In Study 2 and study 3, secondary school teachers (N = 10) and school counselors (N = 6) participated in semi-structured interviews, respectively. Although students felt the uniforms were unattractive, they had neutral to somewhat positive feelings about them overall. They did not report greater school cohesion or national identity related to uniforms but did report that uniforms lessened the importance of socioeconomic and other differences. Teachers and counselors reported similar views; they did not perceive much influence on national or school identity but did see advantages in terms of discipline and the lessening of student inequality. Generally, teachers and counselors were in favor of school uniforms but some suggested that uniform designs could be more culturally inclusive, particularly in regard to Muslim and non-Muslim students. Limitations of using non-representative sampling and future direction for Malaysian school uniforms were discussed. This study highlights the important characteristics that should be taken into consideration by educators and policymakers for future improvement of the national school uniform policy in Malaysia.
    Matched MeSH terms: Clothing
  6. Wan, Ngeow Yen, Chin, Khaw Pei, Che Su Mt. Saad
    MyJurnal
    Reclaimed rubber from rejected natural rubber (NR) latex gloves (r-NRG) was evaluated as partial
    replacement for Standard Malaysian Rubber (SMR) 20 in producing microcellular rubber. In the study, the amount of reclaimed rubber varied from 20 pphr to 95 pphr for the purpose of cost reduction, environmental interest and as processing aids in reducing internal porosity, swells and to minimize shrinkage and air-trapped problems in producing microcellular rubber. A typical formulation in making microcellular rubber slab was developed and two-roll mill was used for compounding. The cure characteristics and mechanical properties, such as density, hardness, tensile strength, and elongation at break, were evaluated. Scorch time and cure rate index performed marginal decreased with increasing of r-NRG content. 95 pphr r-NRG blends showed a consequential drop in hardness. Both tensile properties and elongation at break decreased as the r-NRG content was increased.
    Matched MeSH terms: Clothing
  7. Tumin M, Raja Ariffin RN, Mohd Satar N, Abdullah N, Wan Md Adnan WA, Ismail AZ, et al.
    Ann. Transplant., 2015;20:206-10.
    PMID: 25865792 DOI: 10.12659/AOT.892707
    Malaysia, a country of Muslim majority, is suffering from a severe organ shortage due to the lack of donors. Mosques are the main gateways into the Muslim community. Hence, it is imperative to explore their role in facilitating organ donation.
    Matched MeSH terms: Clothing
  8. Tiang KW, Razack AH, Ng KL
    Singapore Med J, 2017 10;58(10):574-575.
    PMID: 28367582 DOI: 10.11622/smedj.2017023
    A doctor's attire is important in making a positive first impression and enhancing the overall healthcare experience for patients. We conducted a study to examine the perceptions and preferences of patients and doctors regarding six types of dress codes used by doctors in different scenarios and locations. A total of 87 patients and 46 doctors participated in the study. Separate sets of questionnaires containing four demographic questions and 14 survey questions were distributed to the two groups. Most patients preferred doctors to dress formally in white coats regardless of the scenario or location, whereas the majority of doctors preferred formal attire without white coats. Both groups preferred operating theatre attire in the emergency department. Our findings confirmed that patients perceived doctors in white coats to be more trustworthy, responsible, authoritative, confident, knowledgeable and caring. There is a need to educate the public about the reasons for changes in doctors' traditional dress codes.
    Matched MeSH terms: Clothing*
  9. Teo Chee Hau, Noor Hazfalinda Hamzah, Hing Hiang Lian, Sri Pawita Albakri Amir Hamzah
    Sains Malaysiana, 2014;43:1873-1882.
    Decomposition is degradation process of a corpse into basic respective constituents macroscopically and microscopically by action of microorganisms, arthropods and scavengers. Post mortem changes could be separated into early post mortem changes (i.e. algor mortis, rigor mortis and livor mortis) and putrefaction stages of corpse. These changes function as suitable indicators for determination of post mortem interval (PMI). In this paper, different stages of post mortem changes, possible variations such as mummification and formation of adipocere and special circumstances such as burial condition is discussed. This article also refers to several arguments in the different texture of adipocere and the influence of different types of fabric in affecting the post mortem changes and formation of adipocere. This is largely due to the property of permeability and resistance of material against degradation process. Undeniably, decomposition process involves numerous potential variables including burial condition, presence of clothing, potential formation of adipocere and mummification. Hence, studies in forensic taphonomy combined with real case scenario are crucial in understanding the nature of decomposition and estimation of PMI with higher accuracy.
    Matched MeSH terms: Clothing
  10. Teo CH, Amir Hamzah SP
    Malays J Pathol, 2014 Apr;36(1):69.
    PMID: 24763240
    Matched MeSH terms: Clothing*
  11. Teo CH, Pawita AH, Khairul O, Atiah Ayunni AG, Noor Hazfalinda H
    Malays J Pathol, 2013 Jun;35(1):77-85.
    PMID: 23817398 MyJurnal
    Post mortem changes are important in estimating post mortem interval (PMI). This project's aim was to study the effect of burial and type of clothing on rate of decomposition, which can contribute to estimating PMI for victims. 12 rabbits (Oryctolagus cuniculus) carcasses were separated into 3 groups: no clothing, light clothing and heavy clothing. Control subjects were placed on the ground surface while test subjects were buried at 30 cm depth graves. Soil samples prior and after decomposition were collected for soil pH and moisture analysis. Post mortem change was assessed using a Total Body Score system. The head, neck and limb regions were found to decay faster than the body trunk region. Mummifi cation occurred on body parts that were exposed directly to the atmosphere while adipocere formed on some buried subjects. Burial delayed decomposition due to lower insect activity and lower soil temperature. The soil layer also blocked the accessibility of majority of the arthropods, causing further delay in decomposition. Clothing enhanced decay for bodies on ground surface because it provided protection for maggots and retained moisture on tissues. However, clothing delayed decomposition in buried bodies because it physically separated the bodies from soil and arthropods. Higher sun exposure and repetitive exhumation showed acceleration of decomposition. The decomposition process increased soil pH and moisture percentage values. Soil pH initially increased until pH 8.0-8.4 followed by a slight decrease while soil moisture percentage changed inconsistently. Burial was significant in affecting post mortem change, F(1,11)=12.991, p<0.05 while type of clothing was not significant, F(2,9)=0.022, p=0.978 and combination of both type of clothing and burial factors were also not significant, F(2,3)=0.429, p=0.686. For validation, an accuracy of 83.33% was achieved based on soil pH and soil moisture percentage analysis.
    Matched MeSH terms: Clothing*
  12. Teng YT, Lye HO
    Sains Malaysiana, 2014;43:145-150.
    Polarization in antiferroelectric liquid crystals has two origins: The piezoelectric polarization which is of chiral origin and the flexoelectric polarization which originates in different orientation of tilts in neighboring layers. The flexoelectric polarization is perpendicular to the tilt direction only if the structure is uniformly helicoidally modulated. In structures like SmC*F11andSmC;12 the flexoelectric contribution might be significant and it can be non-parallel to the piezoelectric component. Hence it may deviates the direction of polarization from the perpendicular direction significantly. The angle formed by the polarization and the tilt is therefore general and as such the basic characteristic of the SmCG* phase can be recognized. It seems that this aspect was completely overlooked in the past. In this contribution we analyze the dependence of the polarization direction on the phase structures and on the values of piezoelectric and flexoelectric coefficients in the discrete phenomenological model.
    Matched MeSH terms: Clothing
  13. Taufiq-Yap, Y. H., Ong, P. S., Zainal, Z.
    MyJurnal
    In this work, 10 mol% yttrium-doped ceria powders, Ce0.9Y0.1O1.95, were synthesised using a new mechanical technique, mechanochemical reaction, in which both impact action and shearing forces were applied for efficient fine grinding, subsequently leading to higher homogeneity of the resultant powders. Ce0.9Y0.1O1.95 prepared using this new technique was systematically compared with a sample of the same prepared using conventional solid-state methodology. X-ray diffraction analysis showed all prepared samples were single phase with a cubic fluorite structure. Generally, Y2O3-doped CeO2 electrolytes prepared by mechanochemical reactions were stable at a lower temperature (1100 °C) compared with a sample of the same synthesised using the conventional solid-state method. Characterisations using differential thermal analysis (DTA) and thermogravimetric analysis (TGA) showed no thermal changes and phase transitions, indicating all materials were thermally stable. The electrical properties of the samples investigated by AC impedance spectroscopy in the temperature range 200–800 ˚C are presented and discussed. Scanning electron microscopy (SEM) was used to study the morphology of the materials. Fine-grained powders with uniform grain-size distribution were obtained from the mechanochemical reaction.
    Matched MeSH terms: Clothing
  14. Swami V, Miah J, Noorani N, Taylor D
    Br J Psychol, 2014 Aug;105(3):352-63.
    PMID: 25040005 DOI: 10.1111/bjop.12045
    Previous studies have reported equivocal findings concerning the impact of wearing a hijab, or Islamic head- and body-cover, on Muslim women's body image. Here, we sought to examine that impact using a larger sample of Muslim women than has been relied upon and a wider range of body image measures. A total of 587 British Muslim women completed a battery of scales assessing their frequency and conservativeness of hijab use, body image variables, attitudes towards the media and beauty ideals, importance of appearance, and religiosity. Preliminary results indicated that 218 women never used the hijab and 369 women used some form of the hijab at least rarely. Controlling for religiosity, women who wore the hijab had more positive body image, lower internalization of media messages about beauty standards, and placed less importance on appearance than women who did not wear the hijab. Among women who wore the hijab, hijab use significantly predicted weight discrepancy and body appreciation over and above religiosity. These results are discussed in terms of the possible protective impact among British Muslim women of wearing the hijab.
    Matched MeSH terms: Clothing/psychology*
  15. Suzei Mat Nurudin, Nor Suhaiza Md Khalid, Zarina Mohd Zain
    MyJurnal
    The local government is the closest government to the local community and identified as the third level
    of government after the state and federal governments. Each local government has their own power to
    enact by-laws under their respective administration. By-laws is a formulation of the law under the
    jurisdiction of local government in performing its duties and functions covering the administrative area
    that has been identified by the state government. Some of the by-laws play a part in shaping the
    personality of the community, especially in local government areas which are quite different approach
    such as Kota Bharu Municipal Council of Islamic Cities (MPKB-BRI). By-laws implemented by
    MPKB-BRI are very different compared to other states in Malaysia which is the provisions of the bylaws
    that suggests the aurat closure and appropriate clothing among traders, business premises owners
    and local communities. The purpose of this study is to review the extent of the by-laws implemented by
    MPKB-BRI to influence and shaping the personality of the local community in Kota Bharu district,
    Kelantan.
    Matched MeSH terms: Clothing
  16. Suniza, A.M.S., Zaleha Kassim, Chatterji, Anil
    MyJurnal
    Respiratory metabolism of the larvae of Malaysian horseshoe crab Tachypleus gigas (Müller) was studied under different salinities, pH, and temperature. The trend in oxygen consumption was uniform at all salinities, ranging from 10-40 ppt, indicating insignificant influence on the oxygen consumption by the larvae. Similarly, the correlation coefficient values showed that the relationship between oxygen consumption and salinity was not significant (P > 0.05; r = 0.245). During the first three hours, the oxygen consumption was 8.89, 10.72, 17.4, and 12.06% at 10, 20, 30, and 40 ppt salinities, respectively. Meanwhile, the maximum oxygen consumption was recorded after 12 hrs, i.e. at salinity 20 ppt. A sudden drop in oxygen consumption was recorded during 3-6 hours of the experiment. This was followed by a gradual increase in the consumption of oxygen up to 12 hours of experiment. A similar trend in the oxygen consumption was observed in different pH levels, ranging from 5 to 9. At pH 6 and 9, during the first six hour, a moderate consumption of oxygen was observed. However, at pH 6, 7 and 8, the rates of oxygen consumption were found to be relatively greater after six hours, indicating unfavourable conditions. The data were statistically tested and it was found that a high degree of correlations existed between pH and oxygen consumption (r = 0.97). The analysis of covariance showed a significant relationship between oxygen consumption and pH (P < 0.05). Meanwhile, minimal variation in oxygen consumption was recorded between 30 and 40oC, with a
    gradual decrease in dissolved oxygen concentration up to 12 hours of experimental time. At 50oC,
    almost all dissolved oxygen was consumed by the larvae. The rate of oxygen consumption between
    30 and 40oC was low during the first 9 hours of the experiment but it was significantly increased at later hours. A sudden increase in the oxygen consumption was recorded at 50oC, suggesting that it
    might be the most unfavourable temperature condition. Meanwhile, a significant relationship was
    observed between temperature and oxygen consumption (P < 0.05; r = 0.98).
    Matched MeSH terms: Clothing
  17. Solehan Imran Shariffudin, Jafri Mohd. Rohani, Mohd Firdaus Mohd Taib, Roseni Abd. Aziz
    MyJurnal
    Geographically, Malaysia is situated in the equatorial region, thus having a climate of hot and humid throughout the
    year. Effect of heat stress and physical work load at construction industry need to be investigated because of the high number of
    accidents. Thus, perception of physical workload and heat stress by the construction workers in Malaysia needed to be investigated
    and documented. The aim of this paper is to establish a set of questionnaires containing the item generation regarding on physical
    workload and the heat stress perception of construction workers. Physical workload factors such as fatigue, risks, concentration,
    work rhythm, responsibility, satisfaction, and autonomy are inserted as the items in assessing the physical workload. While heat
    stress are assessed using heat risk factors such as temperature, humidity, heat radiation, air movement, workload, clothing and
    acclimatisation. A questionnaire has been developed resulted from various reviewing of literatures on physical workload and heat
    stress and better suited to the Malaysia working environment.
    Matched MeSH terms: Clothing
  18. Siti Soraya AR
    Med J Malaysia, 2020 01;75(1):78-79.
    PMID: 32008026
    Accidental swallowing of objects commonly occurs among children and most of the objects pass through the gastrointestinal tract and out with the stool without any complications. However, recent reports have shown that there is an increasing occurrence of accidental ingestion of hijab pins among young hijab-wearing Muslim women or "hijabi". We highlight one such case, in which a young lady accidentally swallowed a pin that she was holding between her lips while she was styling her hijab. The pin was not successfully retrieved via endoscopy but was fortunately excreted spontaneously without any serious complications.
    Matched MeSH terms: Clothing
  19. Siti Kamariah, C.M.
    MyJurnal
    A Mondor’s disease is a rare, benign and self-limiting condition. It is due to thrombophlebitis of the superficial veins of the breast and chest wall. It usually occurs in middle-aged women who present with a palpable cordlike structure, often painful in the acute phase. The aetiology is unknown, and may be related to trauma, surgery, infection or tight clothing. The finding of a superficial vessel seen as a linear opacity on mammography and a tubular structure on ultrasound is typical. An intra-luminal thrombus may be seen on ultrasound, and there may be absent flow on Doppler imaging. Conservative treatment is usually instituted, although surgery may be indicated in certain circumstances.
    Matched MeSH terms: Clothing
  20. Singh G, Makinde OD
    Sains Malaysiana, 2014;43:483-489.
    The paper is aimed at studying fluid flow heat transfer in the axisymmetric boundary layer flow of a viscous incompressible fluid, along the axial direction of a vertical stationary isothermal cylinder in presence of uniform free stream with momentum slip. The equations governing the flow i.e. continuity, momentum and energy equation are transformed into non-similar boundary layer equations and are solved numerically employing asymptotic series method with Shanks transformation. The numerical scheme involves the Runge-Kutta fourth order scheme along with the shooting technique. The flow is analyzed for both assisting and opposing buoyancy and the effect of different parameters on fluid velocity, temperature distribution, heat transfer and shear stress parameters is presented graphically.
    Matched MeSH terms: Clothing
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links