By-products from different animal sources are currently being utilised for beneficial purposes. Chicken processing plants all over the world generate large amount of solid by-products in form of heads, legs, bones, viscera and feather. These wastes are often processed into livestock feed, fertilizers and pet foods or totally discarded. Inappropriate disposal of these wastes causes environmental pollution, diseases and loss of useful biological resources like protein, enzymes and lipids. Utilisation methods that make use of these biological components for producing value added products rather than the direct use of the actual waste material might be another viable option for dealing with these wastes. This line of thought has consequently led to researches on these wastes as sources of protein hydrolysates, enzymes and polyunsaturated fatty acids. Due to the multi-applications of protein hydrolysates in various branches of science and industry, and the large body of literature reporting the conversion of animal wastes to hydrolysates, a large section of this review was devoted to this subject. Thus, this review reports the known functional and bioactive properties of hydrolysates derived from chicken by-products as well their utilisation as source of peptone in microbiological media. Methods of producing these hydrolysates including their microbiological safety are discussed. Based on the few references available in the literature, the potential of some chicken by-product as sources of proteases and polyunsaturated fatty acids are pointed out along with some other future applications.
In October 1988, a series of food poisoning cases occurred in the State of Perak in Malaysia. Most of the victims were children. Ultimately 13 children between the ages of 2.5 and 11 years died. Epidemiological investigations showed that the probable source of the poison was Loh See Fun, a noodles in the shape of a rat's tail. All the deceased ate the noodles from one supplier. Clinical and pathological findings were similar in each case. Postmortem examination was performed in 11 cases. Toxicological examination on organs in 10 cases showed a high concentration of aflatoxin in tissues of the deceased. High levels of boric acid were excreted from most of the victims. Histological examination of the liver in these cases showed necrotic changes found in aflatoxin poisoning. Combination of the epidemiological, clinical, toxicological, and pathological findings pointed to the fact that there was a common toxin or toxins responsible for the deaths. These were thought to be a combination of boric acid and aflatoxin.
In recent years, issues regading safety and wellness of dietary oils and fats have received major attention. This is particularly so in the case of structured modified fats, which are being used extensively to meet the product-specific demand primarily in bakery industry as shortenings, cocoa butter substitutes in confectionary industry, and in margarine preparation, as butter substitute. During modification stages, native oils and fats are subjected to different physical and chemical treatments such as fractionation, hydrogenation and interesterification in order to produce fats with desirable
physical as well as functional properties. Numerous studies have demonstrated the adverse health effects of these modified oils and fats, especially trans fatty acids, using animal models as well as human volunteers. Consequently, the decadesold process of partial hydrogenation of oils has been abandoned in most nations. However, alternative technologies to hydrogenation are on rise, creating new trends in modified oils and fats synthesis to cater food industry needs that may have unforeseeable consequences on human health.
This paper elucidates the role of processed foods and beverages in the 'nutrition transition' underway in Asia. Processed foods tend to be high in nutrients associated with obesity and diet-related non-communicable diseases: refined sugar, salt, saturated and trans-fats. This paper identifies the most significant 'product vectors' for these nutrients and describes changes in their consumption in a selection of Asian countries. Sugar, salt and fat consumption from processed foods has plateaued in high-income countries, but has rapidly increased in the lower-middle and upper-middle-income countries. Relative to sugar and salt, fat consumption in the upper-middle- and lower-middle-income countries is converging most rapidly with that of high-income countries. Carbonated soft drinks, baked goods, and oils and fats are the most significant vectors for sugar, salt and fat respectively. At the regional level there appears to be convergence in consumption patterns of processed foods, but country-level divergences including high levels of consumption of oils and fats in Malaysia, and soft drinks in the Philippines and Thailand. This analysis suggests that more action is needed by policy-makers to prevent or mitigate processed food consumption. Comprehensive policy and regulatory approaches are most likely to be effective in achieving these goals.
Different parts of a plant (seeds, fruits, flower, leaves, stem, and roots) contain numerous biologically active compounds called "phytoconstituents" that consist of phenolics, minerals, amino acids, and vitamins. The conventional techniques applied to extract these phytoconstituents have several drawbacks including poor performance, low yields, more solvent use, long processing time, and thermally degrading by-products. In contrast, modern and advanced extraction nonthermal technologies such as pulsed electric field (PEF) assist in easier and efficient identification, characterization, and analysis of bioactive ingredients. Other advantages of PEF include cost-efficacy, less time, and solvent consumption with improved yields. This review covers the applications of PEF to obtain bioactive components, essential oils, proteins, pectin, and other important materials from various parts of the plant. Numerous studies compiled in the current evaluation concluded PEF as the best solution to extract phytoconstituents used in the food and pharmaceutical industries. PEF-assisted extraction leads to a higher yield, utilizes less solvents and energy, and it saves a lot of time compared to traditional extraction methods. PEF extraction design should be safe and efficient enough to prevent the degradation of phytoconstituents and oils.
The purpose of this paper is to identify the key domains of entrepreneurial behaviour among business
owner in food processing industry. The study utilized a deductive research design and quantitative
method. There are twenty-one statements about entrepreneurial behaviour to discover a core action
associated with entrepreneurial behaviour. An entrepreneurial behaviour is defined as small family
business strategic behaviour that captures specific entrepreneurial aspects (Walker and Brown, 2004).
In additions, it is the actions taken by the small business owner to achieve business performance
(Delmar, 1996). According to Kirkley (2015), entrepreneurial behaviour as self determined human
action is based on a specific set of values which the individual uses to make decisions about how to
behave in situations that a meaningful to their business. The questionnaires focused primarily on the
meaning of entrepreneurial behaviour as self-determination to be succeed in business. There were 70
respondents were selected by simple random sampling. The data were analysed by Exploratory Factor
Analysis (EFA) and categorised into relevant domains. The result shows four specific domains of
entrepreneurial behaviour business owner in food processing industry, namely, leadership, proactiveness,
committed and risk taking. The finding items to each of these domains are consistent with
the small family business perspective. The practical implication is the presence of the specific core
action associated with entrepreneurial behaviour. The business owner should employ the four core
action to sustain the business. The result of this study is importance to academician in small business
area, business advisor from government and non government sectors, and small family business owner.
The combination of irradiation and biological technique was chosen to study COD, BOD5 and colour removal from textiles effluent in the presence of food industry wastewater. Two biological treatments, the first consisting a mix of non irradiated textile and food industry wastewater and the second a mix of irradiated textiles wastewater and food industry wastewater were operated in parallel. Reduction percentage of COD in textiles wastewater increased from 29.4% after radiation to 62.4% after further undergoing biological treatment. After irradiation, the BOD5 of textiles wastewater was reduced by 22.1%, but reverted to the original value of 36mg/1 after undergoing biological treatment. Colour had decreased from 899.5 ADMI to 379.3 ADM1 after irradiation and continued to decrease to 109.3 ADMI after passing through biological treatment.
Sea cucumber (Stichopus vastus) is considered an underutilized resource, since only its stomach and intestines are eaten raw as salad in a few countries and the remaining parts, especially the integument rich in collagen, is discarded. Hence a valuable by-product having potential nutraceutical and pharmaceutical applications is wasted. In the present investigation, pepsin-solubilized collagen (PSC) from the integument of S. vastus was isolated, purified and characterized.
Mango is a highly perishable seasonal fruit and large quantities are wasted during the peak season as a result of poor postharvest handling procedures. Processing surplus mango fruits into flour to be used as a functional ingredient appears to be a good preservation method to ensure its extended consumption.
Soybean (Glycine max L.) is one the most commonly consumed legumes worldwide, with 200 million metric tons produced per year. However, the inedible soy husk would usually be removed during the process and the continuous generation of soybean husk may represent a major disposal problem for soybean processing industries. Thus, the main aim of the present study was to investigate the possibility to convert soybean husk (S) amended with market-rejected papaya (P) into vermicompost using Eudrilus eugeniae.
The environmental impacts of palm oil mill effluent (POME) have been a concern due to the water pollution and greenhouse gases emissions. Thus, this study was conducted to recover the value-added products from POME source before being discharged. The samples, before (X) and after (Y) the pre-recovery system in the clarification tank were sampled and analysed and proximate analysis indicated that both samples are energy rich source of food due to high contents of fats and carbohydrates. GCMS analysis showed that the oil extracts contain predominantly palmitic, oleic, linoleic and stearic acids. Regiospecific analysis of oil extracts by quantitative 13C-NMR spectroscopy demonstrated that both oil extracts contain similar degree of saturation of fatty acids at sn-2 and sn-1,3 positions. The samples are rich in various phytonutrients, pro-vitamin A, vitamin E, squalene and phytosterols, thus contributing to exceptionally high total flavonoid contents and moderate antioxidant activities. Overall, samples X and Y are good alternative food sources, besides reducing the environmental impact of POME.
This paper examines the interactions of degumming and bleaching processes as well as their influences on the formation of 3-monochloropropane-1,2-diol esters (3-MCPDE) and glycidyl esters in refined, bleached and deodorized palm oil by using D-optimal design. Water degumming effectively reduced the 3-MCPDE content up to 50%. Acid activated bleaching earth had a greater effect on 3-MCPDE reduction compared to natural bleaching earth and acid activated bleaching earth with neutral pH, indicating that performance and adsorption capacities of bleaching earth are the predominant factors in the removal of esters, rather than its acidity profile. The combination of high dosage phosphoric acid during degumming with the use of acid activated bleaching earth eliminated almost all glycidyl esters during refining. Besides, the effects of crude palm oil quality was assessed and it was found that the quality of crude palm oil determines the level of formation of 3-MCPDE and glycidyl esters in palm oil during the high temperature deodorization step of physical refining process. Poor quality crude palm oil has strong impact towards 3-MCPDE and glycidyl esters formation due to the intrinsic components present within. The findings are useful to palm oil refining industry in choosing raw materials as an input during the refining process.
In this work, the potential feasibility of rice straw-derived char (RSC) for removal of C.I. Basic Green 4 (malachite green (MG)), a cationic dye from aqueous solution was investigated. The isotherm parameters were estimated by non-linear regression analysis. The equilibrium process was described well by the Langmuir isotherm model. The maximum RSC sorption capacity was found to be 148.74 mg/L at 30 degrees C. The kinetics of MG sorption on RSC followed the Lagergren's pseudo-first-order model and the overall rate of dye uptake was found to be controlled by external mass transfer at the beginning of adsorption, while intraparticle diffusion controlled the overall rate of adsorption at a later stage. The results indicated that RSC was an attractive adsorbent for removing basic dye from aqueous solutions.
Banana (Musaceae) is one of the world's most important fruit crops that is widely cultivated in tropical countries for its valuable applications in food industry. Its enormous by-products are an excellent source of highly valuable raw materials for other industries by recycling agricultural waste. This prevents an ultimate loss of huge amount of untapped biomass and environmental issues. This review discusses extensively the breakthrough in the utilization of banana by-products such as peels, leaves, pseudostem, stalk and inflorescence in various food and non-food applications serving as thickening agent, coloring and flavor, alternative source for macro and micronutrients, nutraceuticals, livestock feed, natural fibers, and sources of natural bioactive compounds and bio-fertilizers. Future prospects and challenges are the important key factors discussed in association to the sustainability and feasibility of utilizing these by-products. It is important that all available by-products be turned into highly commercial outputs in order to sustain this renewable resource and provide additional income to small scale farming industries without compromising its quality and safety in competing with other commercial products.
Probiotic delivery system was developed via the use of microbial transglutaminase (MTG) cross-linked soy protein isolate (SPI) incorporated with agrowastes such as banana peel (BE), banana pulp (BU), and pomelo rind (PR). Inoculums of Lactobacillus bulgaricus FTDC 1511 were added to the cross-linked protein matrix. The incorporation of agrowastes had significantly (P<0.05) reduced the strength, pH value, and the lightness of the SPI gel carriers, while sodium dodecyl sulfate-polyacrylamide gel electrophoresis profiles revealed that the occurring cross-links within the SPI gel carriers were attributed to the addition of MTG. Scanning electron microscope micrographs illustrated that SPI carriers containing agrowastes have exhibited a less-dense protein matrix. All the SPI carriers possessed maximum swelling ratio at 4 to 4.5 within 15 min in simulated gastric fluid (SGF), whereas the maximum swelling ratios of SPI/BE, SPI/BU, and SPI/PR were higher compared to that of control in simulated intestinal fluid (SIF). Additionally, SPI carriers in SGF medium did not show degradation of structure, whereas a major collapse of network was observed in SIF medium, indicating controlled-release in the intestines. The addition of agrowastes into SPI carriers led to a significantly (P<0.0001) lower release of L. bulgaricus FTDC 1511 in SGF medium and a higher release in SIF medium, compared to that of the control. SPI carriers containing agrowastes may be useful transports for living probiotic cells through the stomach prior to delivery in the lower intestines.
Salmonella enterica serovar Paratyphi B (S. Paratyphi B) is a major foodborne pathogen distributed all over the world. However, little is known about the antibiotic resistance, genetic relatedness and virulence profile of S. Paratyphi B isolated from leafy vegetables and the processing environment in Malaysia. In this study, 6 S. Paratyphi B isolates were recovered from different vegetables and drain water of processing areas obtained from fresh food markets in Malaysia. The isolates were characterized by antibiogram, Pulsed-field gel electrophoresis (PFGE) and virulence genes. Antibiotic susceptibility test showed that 3 of the isolates were resistant to the antibiotics. These include S. Paratyphi B SP251 isolate, which was resistant to chloramphenicol, ampicillin, sulfonamides and streptomycin; Isolate SP246 which was resistant to chloramphenicol, sulfonamides and streptomycin and Isolate SP235 showing resistance to nalidixic acid only. PFGE subtyped the 6 S. Paratyphi B isolates into 6 distinct XbaI-pulsotypes, with a wide range of genetic similarity (0.55 to 0.9). The isolates from different sources and fresh food markets location were genetically diverse. Thirteen (tolC, orgA, spaN, prgH, sipB, invA, pefA, sofB, msgA, cdtB, pagC, spiA and spvB) out of the 17 virulence genes tested were found in all of the S. Paratyphi B isolates. Another gene (lpfC), was found only in one isolate (SP051). None of the isolates possessed sifA, sitC and ironN genes. In summary, this study provides unique information on antibiotic resistance, genetic relatedness, and virulotyping of S. Paratyphi B isolated from leafy vegetables and processing environment.
Previous literatures have demonstrated a significant research gap in terms of the quality of the management practices in the organizational performances of the SMEs particularly in the food processing industry in Malaysia. Subsequently, an exploratory study is conducted to verify the proposed critical success factors (CSF) and the model constructs for SMEs in the Malaysian
food industry that is in line with these practices. Therefore, the purpose of this paper is to identify CSF of quality management practices of the Small and Medium Enterprises (SMEs) in the Malaysian food industry and to develop a conceptual framework of quality management practices based on the Total Quality Management (TQM) in relation to the organizational performance of the SMEs in the food processing industry in Malaysia. The quality management framework consists of leadership, corporate planning, human resource management, customer focus, supplier focus, information management, process management and quality assurance as the CSF. Finding from the exploratory study has supported the proposed constructs and results show that the instrument is reliable in measuring the construct. Thus, this study is important to support the SMEs in the food processing industry in Malaysia to manage and prioritize the implementation of QM in order to improve the organizational performance.
Since early 2000, Malaysian food-export industries have recognised the demand for food
compliant with Islamic dietary law (halal), with primary consumer choices based on quality
and safety. The lack of documented monitoring for health hazards and haram substances led
to the withdrawal of certification. The HACCP-based halal quality-assurance standards were
developed as a result, using the HACCP criteria for safety, religious dietary requirement and
quality. Halal critical control points (HlCCP) are identified using HACCP criteria and a question
tree on HALAL processing and storage. This approach harmonizes and unifies halal processing
with the specific food industry via an HACCP–based halal quality-assurance system.
The application of non-thermal processing technology (NTP) is increasing within the food industry. The absence of heat in this technology offer some advantages such as the sensory and nutritional attributes of the product remaining unaffected, thus yielding products with better quality compared to traditional processing methods. Suitability of technology for a certain application varies according to the nature of the reason and the purpose for processing. Some NTP has long been used in the food industry in Southeast Asia, but most are still at the initial stage of research. Despite several existing challenges, these technologies have the potential to be taken up as an alternative to processing of value-added food products especially now when consumer and trade demands as well as economic strength in the region is changing.