Displaying publications 1 - 20 of 833 in total

Abstract:
Sort:
  1. Swamy MK, Sinniah UR
    Molecules, 2015 May 12;20(5):8521-47.
    PMID: 25985355 DOI: 10.3390/molecules20058521
    Pogostemon cablin Benth. (patchouli) is an important herb which possesses many therapeutic properties and is widely used in the fragrance industries. In traditional medicinal practices, it is used to treat colds, headaches, fever, nausea, vomiting, diarrhea, abdominal pain, insect and snake bites. In aromatherapy, patchouli oil is used to relieve depression, stress, calm nerves, control appetite and to improve sexual interest. Till now more than 140 compounds, including terpenoids, phytosterols, flavonoids, organic acids, lignins, alkaloids, glycosides, alcohols, aldehydes have been isolated and identified from patchouli. The main phytochemical compounds are patchouli alcohol, α-patchoulene, β-patchoulene, α-bulnesene, seychellene, norpatchoulenol, pogostone, eugenol and pogostol. Modern studies have revealed several biological activities such as antioxidant, analgesic, anti-inflammatory, antiplatelet, antithrombotic, aphrodisiac, antidepressant, antimutagenic, antiemetic, fibrinolytic and cytotoxic activities. However, some of the traditional uses need to be verified and may require standardizing and authenticating the bioactivity of purified compounds through scientific methods. The aim of the present review is to provide comprehensive knowledge on the phytochemistry and pharmacological activities of essential oil and different plant extracts of patchouli based on the available scientific literature. This information will provide a potential guide in exploring the use of main active compounds of patchouli in various medical fields.
    Matched MeSH terms: Plant Oils/therapeutic use*; Plant Oils/chemistry
  2. Arris FA, Thai VTS, Manan WN, Sajab MS
    Foods, 2020 Nov 29;9(12).
    PMID: 33260330 DOI: 10.3390/foods9121769
    Process-based contaminants in food-particularly in vegetable oils-have been a topic of interest due to their potential health risk on humans. Oral consumption above the tolerable daily intake might result in health risks. Therefore, it is critical to correctly address the food contaminant issues with a proper mitigation plan, in order to reduce and subsequently remove the occurrence of the contaminant. 3-monochloropropane-1,3-diol (3-MCPD), an organic chemical compound, is one of the heat- and process-induced food contaminants, belonging to a group called chloropropanols. This review paper discusses the occurrence of the 3-MCPD food contaminant in different types of vegetable oils, possible 3-MCPD formation routes, and also methods of reduction or removal of 3-MCPD in its free and bound esterified forms in vegetable oils, mostly in palm oil due to its highest 3-MCPD content.
    Matched MeSH terms: Plant Oils
  3. Siwayanan P, Chin LZ, Parthiban A, Ayodele OB, Hong BZ
    J Oleo Sci, 2024;73(4):479-487.
    PMID: 38556282 DOI: 10.5650/jos.ess23121
    Global demand for epoxidized vegetable oil has been steadily growing. Epoxidized vegetable oils are typically produced using a two-pot synthesis process in which the oxidation and epoxidation reactions are carried out sequentially. This two-pot synthesis method, however, has a major drawback in industrialscale production, particularly when it comes to operational and process safety issues. A laboratory-scale one-pot synthesis method was attempted in this study with the aim to safely synthesize epoxidized Moringa Oleifera oil (eMOo) by avoiding the occurrence of undesired exothermic runaway reaction. The oil extracted from Moringa Oleifera oil seed kernel (MOo) was used as a starting component due to its high degree of unsaturation and also because the Moringa Oleifera plant can be freely grown in any soil conditions. Two parallel oxidation and epoxidation reactions were carried out simultaneously in this one-pot synthesis method to produce eMOo. The effect of five different mole ratios of MOo, acetic acid and hydrogen peroxide (1:1:1, 1:1:2, 1:1.5:2, 1:1.75:2 and 1:2:2, respectively) on reaction mechanism was investigated at the controlled temperature range of 43 - 55°C and reaction time of 0 - 120 min. The physicochemical properties of MOo as well as the oxirane oxygen content (OOC) of the resulting eMOo were characterized. In addition, GC-MS and FTIR analysis were performed to verify the molecular composition of MOo and also to identify the epoxy group of the resulting eMOo respectively. Among the five different mole ratios studied, the 1:1.5:2 mole ratio has the highest unsaturation conversion of 79.57% and OOC of 4.12%.
    Matched MeSH terms: Plant Oils/chemistry
  4. Tan JC, Chuah CH, Cheng SF
    J Sci Food Agric, 2017 Apr;97(6):1784-1789.
    PMID: 27470073 DOI: 10.1002/jsfa.7975
    BACKGROUND: Conventional palm oil milling involves multiple stages after fruit collection; in particular, oil clarification introduces water into the pressed oil, which results in a large quantity of wastewater.

    RESULTS: A combined process of microwave pretreatment and solvent extraction to mill crude palm oil, without introducing water or steam, is described. An excellent yield (up to 30%) of oil was obtained with pretreatment in a 42 L, 1000 W and 2450 MHz microwave oven followed by hexane extraction. The optimum conditions (10 min microwave pretreatment and 12 h solvent extraction) yielded an oil with a low free fatty acid content (<1.0%) and an acceptable anisidine value (<3.0 meq kg(-1) ). The oil had a fatty acid composition not resembling those of conventional crude palm oil and crude palm kernel oil. In the pretreatment, the leached oil had 6.3% lauric acid whereas the solvent extracted oil had only 1.5% lauric acid. Among the factors affecting the oil quality, microwave pretreatment affected the oil quality significantly; however, an optimised duration that would ensure high efficiency in solvent extraction also resulted in ruptured fruitlets, although not to the extent of causing excessive oxidation. In fact, microwave pretreatment should exceed 12 min; after only 15 min, the oil had 1-methylcyclopentanol (12.96%), 1-tetradecanol (9.44%), 1-nonadecene (7.22%), nonanal (7.13%) and 1-tridecene (5.09%), which probably arose from the degradation of fibres.

    CONCLUSION: Microwave pretreatment represents an alternative milling process for crude palm oil compared with conventional processes in the omission of wet treatment with steam. © 2016 Society of Chemical Industry.

    Matched MeSH terms: Plant Oils/isolation & purification*; Plant Oils/chemistry*
  5. Henna Lu, F.S., Tan, P.P
    MyJurnal
    This aim of this research is to investigate thermal stability of virgin coconut oil, (VCO) which was heated at 190°C upon 40 days storage as compared to extra virgin olive oil (EVOO). The changes in fatty acids composition through (GC), Fourier Transform Infrared (FTIR) spectra, iodine value (IV) and total phenolic content were determined throughout the period of study. Results from GC showed that there was significant changes (P
    Matched MeSH terms: Plant Oils
  6. Khor YP, Koh SP, Long K, Long S, Ahmad SZ, Tan CP
    Molecules, 2014 Jul 01;19(7):9187-202.
    PMID: 24988188 DOI: 10.3390/molecules19079187
    Food manufacturers are interested in developing emulsion-based products into nutritional foods by using beneficial oils, such as fish oil and virgin coconut oil (VCO). In this study, the physicochemical properties of a VCO oil-in-water emulsion was investigated and compared to other commercial oil-in-water emulsion products (C1, C2, C3, and C4). C3 exhibited the smallest droplet size of 3.25 µm. The pH for the emulsion samples ranged from 2.52 to 4.38 and thus were categorised as acidic. In a texture analysis, C2 was described as the most firm, very adhesive and cohesive, as well as having high compressibility properties. From a rheological viewpoint, all the emulsion samples exhibited non-Newtonian behaviour, which manifested as a shear-thinning property. The G'G'' crossover illustrated by the VCO emulsion in the amplitude sweep graph but not the other commercial samples illustrated that the VCO emulsion had a better mouthfeel. In this context, the VCO emulsion yielded the highest zeta potential (64.86 mV), which was attributed to its strong repulsive forces, leading to a good dispersion system. C2 comprised the highest percentage of fat among all emulsion samples, followed by the VCO emulsion, with 18.44% and 6.59%, respectively.
    Matched MeSH terms: Plant Oils/chemistry*
  7. Giita Silverajah VS, Ibrahim NA, Yunus WM, Hassan HA, Woei CB
    Int J Mol Sci, 2012;13(5):5878-98.
    PMID: 22754338 DOI: 10.3390/ijms13055878
    In this work, poly(lactic acid) (PLA) a fully biodegradable thermoplastic polymer matrix was melt blended with three different epoxidized palm oil (EPO). The aim of this research was to enhance the flexibility, mechanical and thermal properties of PLA. The blends were prepared at various EPO contents of 1, 2, 3, 4 and 5 wt% and characterized. The SEM analysis evidenced successful modification on the neat PLA brittle morphology. Tensile tests indicate that the addition of 1 wt% EPO is sufficient to improve the strength and flexibility compared to neat PLA. Additionally, the flexural and impact properties were also enhanced. Further, DSC analysis showed that the addition of EPO results in a decrease in T(g), which implies an increase in the PLA chain mobility. In the presence of 1 wt% EPO, TGA results revealed significant increase in the thermal stability by 27%. Among the three EPOs used, EPO(3) showed the best mechanical and thermal properties compared to the other EPO's, with an optimum loading of 1 wt%. Conclusively, EPO showed a promising outcome to overcome the brittleness and improve the overall properties of neat PLA, thus can be considered as a potential plasticizer.
    Matched MeSH terms: Plant Oils/chemistry*
  8. Ahmad AL, Chong MF, Bhatia S
    J Hazard Mater, 2009 Nov 15;171(1-3):166-74.
    PMID: 19573986 DOI: 10.1016/j.jhazmat.2009.05.114
    The discharge of palm oil mill effluent (POME) causes serious pollution problems and the membrane based POME treatment is suggested as a solution. Three different designs, namely Design A, B and C distinguished by their different types and orientations of membrane system are proposed. The results at optimum condition proved that the quality of the recovered water for all the designs met the effluent discharge standards imposed by the Department of Environment (DOE). The economic analysis at the optimum condition shows that the total treatment cost for Design A was the highest (RM 115.11/m(3)), followed by Design B (RM 23.64/m(3)) and Design C (RM 7.03/m(3)). In this study, the membrane system operated at high operating pressure with low membrane unit cost is preferable. Design C is chosen as the optimal design for the membrane based POME treatment system based on the lowest total treatment cost.
    Matched MeSH terms: Plant Oils/analysis*
  9. Adam SK, Das S, Jaarin K
    Int J Exp Pathol, 2009 Jun;90(3):321-7.
    PMID: 19563614 DOI: 10.1111/j.1365-2613.2009.00658.x
    Hypercholesterolaemia, increase in lipid peroxidation and hyperhomocysteinaemia may contribute to the pathogenesis of atherosclerosis. This study was performed to examine the effects of repeatedly heated palm oil mixed with 2% cholesterol diet on atherosclerosis in oestrogen-deficient postmenopausal rats. Ovariectomy causes disruption of tunica intima layer of the rat aorta simulating a postmenopausal condition in females. Twenty-four ovariectomized female Sprague-Dawley rats were divided into four groups. The control group received 2% cholesterol diet without palm oil. A diet with 2% cholesterol content fortified with fresh, once-heated and five-times-heated palm oil was given to the other treatment groups. The rats were sacrificed at the end of 4 months of study and the aortic arch tissue was processed for histomorphometry and electron microscopy. On observation, there was disruption of the intimal layer of the ovariectomized rat aorta. There was no obvious ultrastructural change in the aorta of the rats fed with fresh palm oil. The ultrastructural changes were minimal with once-heated palm oil, in which there was a focal disruption of the endothelial layer. The focal disruption was more pronounced with five-times-heated palm oil. The results of this study show that the ingestion of fresh palm oil may have a protective effect on the aorta but such a protective action may be lost when the palm oil is repeatedly heated. The study may be clinically important for all postmenopausal women who are susceptible to atherosclerosis.
    Matched MeSH terms: Plant Oils/toxicity*
  10. Choo YM, Ma AN, Chuah CH, Khor HT, Bong SC
    Lipids, 2004 Jun;39(6):561-4.
    PMID: 15554155
    The concentration of vitamin E isomers, namely, alpha-tocopherol (alpha-T), alpha-tocotrienol, gamma-tocotrienol, and delta-tocotrienol in palm mesocarp at 4, 8, 12, 16, and 20 wk after anthesis (WAA) were quantified using HPLC coupled with fluorescence detection. alpha-T was detected throughout the palm fruits' maturation process, whereas unsaturated tocotrienols were found only in ripe palm fruits. These developmental results indicate that tocotrienols are synthesized between 16 and 20 WAA.
    Matched MeSH terms: Plant Oils/analysis
  11. Tan KT, Lee KT, Mohamed AR
    Bioresour Technol, 2010 Feb;101(3):965-9.
    PMID: 19773156 DOI: 10.1016/j.biortech.2009.09.004
    In this study, fatty acid methyl esters (FAME) have been successfully produced from transesterification reaction between triglycerides and methyl acetate, instead of alcohol. In this non-catalytic supercritical methyl acetate (SCMA) technology, triacetin which is a valuable biodiesel additive is produced as side product rather than glycerol, which has lower commercial value. Besides, the properties of the biodiesel (FAME and triacetin) were found to be superior compared to those produced from conventional catalytic reactions (FAME only). In this study, the effects of various important parameters on the yield of biodiesel were optimized by utilizing Response Surface Methodology (RSM) analysis. The mathematical model developed was found to be adequate and statistically accurate to predict the optimum yield of biodiesel. The optimum conditions were found to be 399 degrees C for reaction temperature, 30 mol/mol of methyl acetate to oil molar ratio and reaction time of 59 min to achieve 97.6% biodiesel yield.
    Matched MeSH terms: Plant Oils/chemistry
  12. Wu TY, Mohammad AW, Jahim JM, Anuar N
    Biotechnol Adv, 2009 Jan-Feb;27(1):40-52.
    PMID: 18804158 DOI: 10.1016/j.biotechadv.2008.08.005
    During the last century, a great deal of research and development as well as applications has been devoted to waste. These include waste minimization and treatment, the environmental assessment of waste, minimization of environmental impact, life cycle assessment and others. The major reason for such huge efforts is that waste generation constitutes one of the major environmental problems where production industries are concerned. Until now, an increasing pressure has been put on finding methods of reusing waste, for instance through cleaner production, thus mirroring rapid changes in environmental policies. The palm oil industry is one of the leading industries in Malaysia with a yearly production of more than 13 million tons of crude palm oil and plantations covering 11% of the Malaysian land area. However, the production of such amounts of crude palm oil result in even larger amounts of palm oil mill effluent (POME), estimated at nearly three times the quantity of crude palm oil. Normally, POME is treated using end-of-pipe processes, but it is worth considering the potential value of POME prior to its treatment through introduction of a cleaner production. It is envisaged that POME can be sustainably reused as a fermentation substrate in the production of various metabolites, fertilizers and animal feeds through biotechnological advances. The present paper thus discusses various technically feasible and economically beneficial means of transforming the POME into low or preferably high value added products.
    Matched MeSH terms: Plant Oils/chemistry*
  13. Khairiah Haji Badri, Muhammad Syukri Ngah
    Sains Malaysiana, 2015;44:861-867.
    An investigation on a batch production of palm kernel oil polyol (PKO-p) was conducted via esterification and condensation.
    The process design was thoroughly studied as a preliminary step for future upscaling. The process variables included
    necessity of vacuum pump, controlling of heating rate, recording the production time, nitrogen gas flow and agitator
    speed. About 250 mL PKO-p was successfully synthesized within 3 h. Vacuum pressure was applied to haul out moisture
    from the system. The control of heating rate and production time are vital to avoid sudden oxidation.
    Matched MeSH terms: Plant Oils
  14. Amran MHH, Zulfakar MH, Danik MF, Abdullah MSP, Shamsuddin AF
    Daru, 2019 Jun;27(1):191-201.
    PMID: 31020546 DOI: 10.1007/s40199-019-00262-7
    PURPOSE: Intravenous lipid emulsion (IVLE) was first used to prevent essential fatty acids deficiency. IVLE with α-tocopherol was reported to provide protection against parenteral nutrition-associated liver disease. This study aims to determine the optimal parameters and conditions in developing a physically stable IVLE from superolein palm oil (SoLE 20%) and its effect on lipid and liver profiles in an animal model.

    METHODS: SoLE 20% was prepared using superolein oil and MCT oil (1:1), stabilized with egg lecithin and homogenized using a high pressure homogenizer. Mean droplet size was used as the response variable and was measured using laser diffraction and dynamic light scattering method. Physical stability at 4 °C, 25 °C and 40 °C storage temperatures were determined based on particle size and distribution, polydispersity index, zeta potential, viscosity, vitamin E contents and pH. Sterility and pyrogenicity were also investigated. Rabbits were administered with 1.0 g/kg SoLE 20% for 5 h and repeated daily for 3 days to investigate its effect on blood lipid and liver enzymes profile.

    RESULTS: SoLE 20% was succesfully prepared using the optimized parameters of 800 psi, 7 cycles and 1.2 g lecithin. The IVLE prepared had a particle size of 252.60 ± 4.88 nm and was physically stable for 4 weeks at different storage temperatures. SoLE 20% had a high content of natural vitamin E, remained sterile and pyrogen free. It was also safe for intravenous administration and did not alter the blood lipid (p > 0.05) and liver enzymes profiles (p > 0.05) of the rabbits.

    CONCLUSION: The optimal parameters to develop a stable superolein based IVLE are 800 psi homogenization pressure, 7 homogenization cycles and using 1.2 g lecithin as the emulsifier. SoLE 20% is safe for intravenous administration and does not significantly alter lipid and liver enzymes profiles of the rabbits.

    Matched MeSH terms: Plant Oils/chemistry*
  15. Baroutian S, Aroua MK, Raman AA, Sulaiman NM
    Bioresour Technol, 2011 Jan;102(2):1095-102.
    PMID: 20888219 DOI: 10.1016/j.biortech.2010.08.076
    In this study, a novel continuous reactor has been developed to produce high quality methyl esters (biodiesel) from palm oil. A microporous TiO2/Al2O3 membrane was packed with potassium hydroxide catalyst supported on palm shell activated carbon. The central composite design (CCD) of response surface methodology (RSM) was employed to investigate the effects of reaction temperature, catalyst amount and cross flow circulation velocity on the production of biodiesel in the packed bed membrane reactor. The highest conversion of palm oil to biodiesel in the reactor was obtained at 70 °C employing 157.04 g catalyst per unit volume of the reactor and 0.21 cm/s cross flow circulation velocity. The physical and chemical properties of the produced biodiesel were determined and compared with the standard specifications. High quality palm oil biodiesel was produced by combination of heterogeneous alkali transesterification and separation processes in the packed bed membrane reactor.
    Matched MeSH terms: Plant Oils/chemistry
  16. Munir M, Ahmad M, Mubashir M, Asif S, Waseem A, Mukhtar A, et al.
    Bioresour Technol, 2021 May;328:124859.
    PMID: 33621759 DOI: 10.1016/j.biortech.2021.124859
    The potential of new trimetallic (Ce, Cu, La) loaded montmorillonite clay catalyst for synthesizing biodiesel using novel non-edible Celastrus paniculatus Willd seed oil via two-step transesterification reaction has been reported along with catalyst characterization. Transesterification reaction was optimized and maximum biodiesel yield of 89.42% achieved under optimal operating reaction states like; 1:12 oil to methanol ratio, 3.5% of catalyst amount, 120 °C of reaction temperature for 3 h. The predicted and experimental biodiesel yields under these reaction conditions were 89.42 and 89.40%, which showing less than 0.05% variation. Additionally, optimum biodiesel yield can be predicted by drawing 3D surface plots and 2D contour plots using MINITAB 17 software. For the characterization of the obtained biodiesel, analysis including the GC/MS, FT-IR, 1H NMR and 13C NMR were applied. The fuel properties of obtained biodiesel agrees well with the different European Union (EU-14214), China (GB/T 20828), and American (ASTM-951, 6751) standards.
    Matched MeSH terms: Plant Oils/analysis
  17. Heo CC, Mohamad AM, Ahmad Firdaus MS, Jeffery J, Baharudin O
    Trop Biomed, 2007 Dec;24(2):23-7.
    PMID: 18209704 MyJurnal
    This preliminary study was carried out in a palm oil plantation in Tanjung Sepat, Selangor in 17 May 2007 by using pig (Sus scrofa) as a carcass model in forensic entomological research. A 3 month old pig (8.5 kg) that died of pneumonio was placed in the field to observe the decomposition stages and the fauna succession of forensically important flies. Observation was made for two weeks; two visits per day and all climatological data were recorded. The first visitor to the pig carcass was a muscid fly, seen within a minute, and followed by ants and spiders. Within half an hour, calliphorid flies came over. On the second day (fresh), few calliphorid and sarcophagid flies were found on the carcass. Two different species of moths were trapped in the hanging net. The first larva mass occurred on the third day (bloated) around the mouthpart, with some L1 and L2 found in the eyes. Reduvid bugs and Staphylinidae beetles were recovered on the fourth day (active decay), and new maggot masses occurred in the eyes and anus. L3 larvae could be found beneath the pig carcass on the fourth day. On the fifth day (active decay), new maggot masses were found on neck, thorax, and hind legs. Advance decay occurred on the sixth day with abundant maggots covering all over the body. The main adult fly population was Chrysomya megacephala (day 2 to day 6), but the larvae population was mainly those of Chrysomya rufifacies (day 4 to day 14). The dry stage began on the eighth day. Hermetia illucens adult was caught on day-13, and a larvae mass of Chrysomya rufifacies was seen burrowing under the soil. This forensic entomological research using pig carcass model was the first record in this country.
    Matched MeSH terms: Plant Oils
  18. Azwandi A, Abu Hassan A
    Trop Biomed, 2009 Apr;26(1):1-10.
    PMID: 19696721 MyJurnal
    This study was carried out in an oil palm plantation in Bandar Baharu, Kedah using monkey carcasses and focuses in documenting the decomposition and dipteran colonization sequences in 50 days. This is the first study of Diptera associated with the exploitation of carcasses conducted in the north of peninsular Malaysia during the dry and wet seasons thereat. During the process of decomposition in both seasons, five phases of decay were recognized namely fresh, bloated, active decay, advance decay and dry remain. In this decomposition study, biomass loss of carcass occurred rapidly during the fresh to active decay stage due to the colonization and feeding activity of the Diptera larvae. The duration of the fresh and bloated stages of decay were the same in wet and dry seasons but later stages of decay were markedly shorter during the wet season. Twenty one species of adult Diptera were identified colonizing carcasses in the study period. Among the flies from the family Calliphoridae, Chrysomya megacephala Fabricius and Chrysomya nigripes Aubertin were recognized as the earliest arrivals on the first day of exposure. Adult Ch. nigripes was abundant for approximately two weeks after placement of the carcasses. By comparing the percentages of adults collected during the study period, the calliphorids abundance in percentages in wet season was 50.83%, but in dry season, the abundance was only about 35.2%. In contrast, the percentage of Sphaeroceridae in wet season was only 3.33%, but in the dry season, the abundance was 20.8%. Dipteran in family Phoridae, Piophilidae, Sepsidae, Drosophilidae and Dolichopodidae colonized the carcasses for a long period of time and were categorized as long term colonizers.
    Matched MeSH terms: Plant Oils
  19. Leeyaphan C, Varothai S, Trakanwittayarak S, Suphatsathienkul P, Pattaravadee S, Matthapan L, et al.
    J Cosmet Dermatol, 2022 Feb;21(2):679-688.
    PMID: 33811776 DOI: 10.1111/jocd.14125
    BACKGROUND: Intertrigo is an inflammatory skin-fold condition. Candida infections may occur concurrently or afterward. Topical corticosteroids may reduce inflammation but exacerbate Candida infections. The treatment is contentious.

    OBJECTIVE: To evaluate the efficacies and safety of adsorbent lotion containing tapioca starch, spent grain wax, Butyrospermum parkii extract, argania spinosa kernel oil, aloe barbadensis, rosehip oil, and allantoin for the treatment of mild-to-moderate intertrigo, relative to 1% hydrocortisone cream.

    METHODS: This randomized, double-blinded study enrolled 40 intertrigo patients. Twice daily, 20 patients applied adsorbent lotion while the remainder used 1% hydrocortisone cream. Efficacy evaluation, skin biophysical measurements, skin tolerability, safety, and visual analog scale (VAS) patient-satisfaction scores were evaluated at baseline and Week 2.

    RESULTS: The adsorbent lotion showed higher complete cure rates for color, partial epidermal loss, papules/pustules/vesicles/patches, dryness, and scaling than the corticosteroid without statistical significance. Adsorbent lotion demonstrated significantly higher reduction in pruritus than the corticosteroid treatment. Reduction of erythema level using Mexameter and VAS patient-satisfaction scores were not statistically different between adsorbent lotion and hydrocortisone cream. No adverse effects or superimposed infections were reported.

    CONCLUSIONS: The anti-inflammatory efficacies of adsorbent lotion and low-potency steroid were equivalent. The lotion was safe and produced excellent pruritus reduction. Patient satisfaction was high.

    Matched MeSH terms: Plant Oils
  20. Sobhanzadeh E, Abu Bakar NK, Bin Abas MR, Nemati K
    Environ Monit Assess, 2012 Sep;184(9):5821-8.
    PMID: 21989900 DOI: 10.1007/s10661-011-2384-0
    In this study, a rapid, specific and sensitive multi-residue method based on acetonitrile extraction followed by dispersive solid-phase extraction (d-SPE) clean-up was implemented and validated for multi-class pesticide residues determination in palm oil for the first time. Liquid-liquid extraction followed by low-temperature precipitation procedure was evaluated in order to study the freezing-out clean-up efficiency to obtain high recovery yield and low co-extract fat residue in the final extract. For clean-up step, d-SPE was carried out using a combination of anhydrous magnesium sulphate (MgSO(4)), primary secondary amine, octadecyl (C(18)) and graphitized carbon black. Recovery study was performed at two concentration levels (10 and 100 ng g(-1)), yielding recovery rates between 74.52% and 97.1% with relative standard deviation values below 10% (n = 6) except diuron. Detection and quantification limits were lower than 5 and 9 ng g(-1), respectively. In addition, soft matrix effects (≤±20%) were observed for most of the studied pesticides except malathion that indicated medium (20-50%) matrix effects. The proposed method was successfully applied to the analysis of suspected palm oil samples.
    Matched MeSH terms: Plant Oils/chemistry*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links