Displaying publications 1 - 20 of 158 in total

Abstract:
Sort:
  1. Fulltext Yield improvement study on a reduced size blank metal sheet for stamping product
    Izwan Hamid, Sharuddin Mohd Dahuri, Syed Fahmi Syed Putra
    Journal of Engineering and Science Research, 2018;2(5):44-48.
    MyJurnal
    This paper is about the reduction of the overall size of metal blanking sheet that is being used to form a stamping product or car body panel of a car manufacturer in Malaysia. The current blanking sheet produces extra waste which will be recycled and does not contribute to increase productivity but increases inventory cost. The reduction in the blanking sheet size will lead to the reduction of raw material hence reduced the production cost. However, the reduced size of blanking sheet could affect the yield strength of the product. The study of the yield strength and yield improvement of the product are done by simulating stress analysis by using CATIA software. The results show that the new proposed size of the metal blanking sheet provides accuracy of the product dimension as well as maintaining the yield strength of the product and it reduced a significant amount of metal scrap which is nearly 4% of material weight and save around 10% of inventory cost.
    Matched MeSH terms: Recycling
  2. Fulltext Within cluster pattern identification: A new approach for optimizing recycle point distribution to support policy implementation on waste management in Malaysia
    Azri S, Ujang U, Abdullah NS
    Waste Manag Res, 2023 Mar;41(3):687-700.
    PMID: 36129019 DOI: 10.1177/0734242X221123489
    Despite the government's policies and objectives, Malaysia lags behind in sustainable waste management techniques, particularly recycling. Bins should be located conveniently to encourage recycling and reduce waste. The current model of bin location-allocation is mostly determined by distance. However, it has been identified that previous studies excluded an important factor: litter pattern identification. Litter pattern is important to identify waste generation hotspots and litter distribution. Thus, we proposed the within cluster pattern identification (WCPI) approach to optimize the recycle point distribution. WCPI gathers the information on litter distribution using geotagged images and analyses the pattern distribution. The optimal location for recycle bin can be identified by incorporating k-means clustering to the pattern distribution. Since k-means faces the non-deterministic polynomial-time-hard challenge of selecting the ideal cluster and cluster centre, WCPI used the total within-cluster sum of square on top of k-means clustering. The proposed location by WCPI is validated in terms of accessibility and suitability. Furthermore, this study provides further analysis of carbon footprint that can be reduced by simulating the data from geotagged images. The results show that 10,323.55 kg of carbon emission can be reduced if the litter is sent for recycling. Thus, we believe that locating bins at an optimal location will embark on consumer motivation to dispose of recycled waste, reduce litter and lessen the carbon footprint. At the same time, these efforts could transform Malaysia into a clean and sustainable nation that aims to achieve Agenda 2030.
    Matched MeSH terms: Recycling/methods
  3. Fulltext Willingness among food consumers to recycle human urine as crop fertiliser: Evidence from a multinational survey
    Simha P, Barton MA, Perez-Mercado LF, McConville JR, Lalander C, Magri ME, et al.
    Sci Total Environ, 2021 Apr 15;765:144438.
    PMID: 33418332 DOI: 10.1016/j.scitotenv.2020.144438
    Source-separating sanitation systems offer the possibility of recycling nutrients present in wastewater as crop fertilisers. Thereby, they can reduce agriculture's impacts on global sources, sinks, and cycles for nitrogen and phosphorous, as well as their associated environmental costs. However, it has been broadly assumed that people would be reluctant to perform the new sanitation behaviours that are necessary for implementing such systems in practice. Yet, few studies have tried to systematically gather evidence in support of this assumption. To address this gap, we surveyed 3763 people at 20 universities in 16 countries using a standardised questionnaire. We identified and systematically assessed cross-cultural and country-level explanatory factors that were strongly associated with people's willingness to consume food grown using human urine as fertiliser. Overall, 68% of the respondents favoured recycling human urine, 59% stated a willingness to eat urine-fertilised food, and only 11% believed that urine posed health risks that could not be mitigated by treatment. Most people did not expect to pay less for urine-fertilised food, but only 15% were willing to pay a price premium. Consumer perceptions were found to differ greatly by country and the strongest predictive factors for acceptance overall were cognitive factors (perceptions of risks and benefits) and social norms. Increasing awareness and building trust among consumers about the effectiveness of new sanitation systems via cognitive and normative messaging can help increase acceptance. Based on our findings, we believe that in many countries, acceptance by food consumers will not be the major social barrier to closing the loop on human urine. That a potential market exists for urine-fertilised food, however, needs to be communicated to other stakeholders in the sanitation service chain.
    Matched MeSH terms: Recycling*
  4. Water pathways through the ages: Integrated laundry wastewater treatment for pollution prevention
    Ho KC, Teow YH, Sum JY, Ng ZJ, Mohammad AW
    Sci Total Environ, 2021 Mar 15;760:143966.
    PMID: 33341611 DOI: 10.1016/j.scitotenv.2020.143966
    Rapid urbanization and the rising global population have led to the generation of substantial volumes of laundry wastewater. Accordingly, treatment of laundry wastewater has been advocated to curb water pollution and achieve water sustainability. However, technological limitations in treating (specifically) laundry wastewater and the lack of regulations governing the levels of contaminants for such discharges have been perennial problems. This review bridges the knowledge gap by delineating the feasibility of current technologies in laundry wastewater treatment and the experiences of various countries in adopting different approaches. Besides, the feasible methods for collecting laundry wastewater are elaborated. The development of the treatment technologies is highlighted, in which the integrated-treatment processes (physicochemical, biological, and combination of both) are critically discussed based on their functions and methods. A judicious selection of the technologies not only improves the energy efficiency and quality of the treated wastewater, but also mitigates capitals and operational costs. This is projected to enhance public acceptance towards the reuse of laundry wastewater. Thus, the comprehensive assessment herein is envisioned to insightfully guide national policymakers in exploring the viability of the technologies and water-recycling projects. Future research should focus on the techno-economic aspects of the treatment processes, especially their industrial scale-up.
    Matched MeSH terms: Recycling
  5. Waste resources recycling in controlled low-strength material (CLSM): A critical review on plastic properties
    Kaliyavaradhan SK, Ling TC, Guo MZ, Mo KH
    J Environ Manage, 2019 Jul 01;241:383-396.
    PMID: 31028969 DOI: 10.1016/j.jenvman.2019.03.017
    The exponential growth of waste generation is posing serious environmental issues and thus requires urgent management and recycling action to achieve green sustainable development. Controlled low-strength material (CLSM) is a highly flowable cementitious backfill material with self-consolidating properties. The CLSM efficiency during construction and final performance at the site depends on its plastic properties. Plastic properties are responsible for workability, pumpability, stability, and lateral pressure on adjacent soils. This paper presents a critical review to date on the use of waste materials and/or by-products and their impacts on the plastic properties of the CLSM. Extensive previous studies demonstrated that the basic properties and content of waste materials as well as the amount of water in the mix design, play a dominant role in determining the plastic properties of CLSM. The discussed plastic properties of CLSM include flowability, bleeding, segregation, and hardening time, which are found to be inter-related. Proper mix design adjustment to accommodate the use of waste materials is possible to produce sustainable CLSM with acceptable plastic properties. Additionally, the discussion and analysis presented in this paper could provide a basis for future research advances and the development of sustainable CLSM prepared with waste materials.
    Matched MeSH terms: Recycling*
  6. Waste production from phacoemulsification surgery
    Khor HG, Cho I, Lee KRCK, Chieng LL
    J Cataract Refract Surg, 2020 02;46(2):215-221.
    PMID: 32126034 DOI: 10.1097/j.jcrs.0000000000000009
    PURPOSE: To determine the amount of waste produced from phacoemulsification surgeries and ways to curtail the problem.

    SETTING: Miri Hospital, Sarawak, Malaysia.

    DESIGN: Prospective study.

    METHODS: Phacoemulsification surgery cases were included in this study; nonphacoemulsification surgeries were excluded. The waste was subdivided into 3 main categories, general waste, clinical waste, and sharps. The waste produced by ophthalmologists and trainees was accounted for separately. The mean weight of waste per case was obtained by dividing the total weight of waste produced with the total number of cases.

    RESULTS: The total waste produced from a total of 203 cases of phacoemulsification surgeries was 167.965 kg, of which, 95.063 kg (56.6%) were clinical waste, 63.197 kg (37.6%) were general waste, and 9.705 kg (5.8%) were sharps; 32.193 kg (50.9%) out of the general waste pool were recyclable waste products. The mean waste production per case of phacoemulsification surgery for an ophthalmologist was 0.814 kg, 1.086 kg per case for a trainee. A case of phacoemulsification surgery would produce 0.282 kg of carbon dioxide equivalents in the setup based on the recyclable general waste.

    CONCLUSIONS: The average waste produced per case of phacoemulsification surgery in Miri Hospital was 0.827 kg. After excluding the recyclable material, the average waste produced per case was 0.669 kg. Following the 3 R's principles (reduce, reuse, and recycle) in the handling of waste production might reduce environmental impact.

    Matched MeSH terms: Recycling
  7. Fulltext Waste management evolution in the last five decades in developing countries - A review
    Maalouf A, Agamuthu P
    Waste Manag Res, 2023 Sep;41(9):1420-1434.
    PMID: 37125680 DOI: 10.1177/0734242X231160099
    This review provides the history and current paradigms of waste management (WM) practices in developing nations during the last five decades. It explores the evolution of the challenges, complexities, and trends during this period. This paper, for the first time, presents an estimation of the amount of municipal solid waste (MSW) generated in developing nations in the last five decades based on the material flow analysis approach. Overall, the amount of MSW in developing countries has increased from about 0.64 billion Mt in 1970 to 2 billion Mt in 2019. This review demonstrates the importance of finding new WM approaches in developing nations in the context of formulating policies, strategies, and highlights the major trends that re-define WM in developing countries. It also aims to present the holistic changes in technology, economic and environmental feasibility aspects to attain an integrated sustainable WM system in developing countries. Specific focus on open-burning, open-dumping, informal recycling, food waste, plastic pollution, and waste collection with reference to Sustainable Development Goals are explained. Drivers for the way forward including circular economy are investigated.
    Matched MeSH terms: Recycling
  8. Fulltext Waste management developments in the last five decades: Asian perspective
    Agamuthu P, Babel S
    Waste Manag Res, 2023 Dec;41(12):1699-1716.
    PMID: 37823520 DOI: 10.1177/0734242X231199938
    Solid waste management was explored in Asia's last five decades, and the issues and challenges were identified. Waste generation has increased in all nations in the previous 50 years, although more recently, a declining trend has been observed in Japan and Korea. The composition has been predominantly organic, with 45-50% being kitchen waste. Material extraction and productivity to sustain the most populous part of the globe are explained. Waste management technologies have evolved, with more nations slowly transitioning from landfills to using waste-to-energy options. However, landfilling and open dumps are still the major disposal choice in most developing countries in Asia. Thus, the issues of concern include dumpsites management, the informal sector, waste collection, open burning and food waste. Changes (increasing trends) in the recycling technologies and quantum are evident, as seen in several country reports from India, Indonesia, Japan, Malaysia, Singapore, South Korea, Thailand and Vietnam. There are several issues and challenges for recycling, which are explored in the text. Lastly, the drivers that propel the whole scenario of waste management in Asia and the evolution of these drivers over time are discussed. Several recommendations are included to achieve sustainable waste management in Asia.
    Matched MeSH terms: Recycling
  9. Fulltext Warpage Optimisation Using Recycled Polycar-bonates (PC) on Front Panel Housing
    Tamizi NAMA, Rahim SZA, Abdellah AE, Abdullah MMAB, Nabiałek M, Wysłocki JJ, et al.
    Materials (Basel), 2021 Mar 15;14(6).
    PMID: 33804036 DOI: 10.3390/ma14061416
    Many studies have been done using recycled waste materials to minimise environmental problems. It is a great opportunity to explore mechanical recycling and the use of recycled and virgin blend as a material to produce new products with minimum defects. In this study, appropriate processing parameters were considered to mould the front panel housing part using R0% (virgin), R30% (30% virgin: 70% recycled), R40% (40% virgin: 60% recycled) and R50% (50% virgin: 50% recycled) of Polycarbonate (PC). The manufacturing ability and quality during preliminary stage can be predicted through simulation analysis using Autodesk Moldflow Insight 2012 software. The recommended processing parameters and values of warpage in x and y directions can also be obtained using this software. No value of warpage was obtained from simulation studies for x direction on the front panel housing. Therefore, this study only focused on reducing the warpage in the y direction. Response Surface Methodology (RSM) and Genetic Algorithm (GA) optimisation methods were used to find the optimal processing parameters. As the results, the optimal ratio of recycled PC material was found to be R30%, followed by R40% and R50% materials using RSM and GA methods as compared to the average value of warpage on the moulded part using R0%. The most influential processing parameter that contributed to warpage defect was packing pressure for all materials used in this study.
    Matched MeSH terms: Recycling
  10. Utilization of chemically treated municipal solid waste (spent coffee bean powder) as reinforcement in cellulose matrix for packaging applications
    Thiagamani SMK, Nagarajan R, Jawaid M, Anumakonda V, Siengchin S
    Waste Manag, 2017 Nov;69:445-454.
    PMID: 28774586 DOI: 10.1016/j.wasman.2017.07.035
    As the annual production of the solid waste generable in the form of spent coffee bean powder (SCBP) is over 6 million tons, its utilization in the generation of green energy, waste water treatment and as a filler in biocomposites is desirable. The objective of this article is to analyze the possibilities to valorize coffee bean powder as a filler in cellulose matrix. Cellulose matrix was dissolved in the relatively safer aqueous solution mixture (8% LiOH and 15% Urea) precooled to -12.5°C. To the cellulose solution (SCBP) was added in 5-25wt% and the composite films were prepared by regeneration method using ethyl alcohol as a coagulant. Some SCBP was treated with aq. 5% NaOH and the composite films were also prepared using alkali treated SCBP as a filler. The films of composites were uniform with brown in color. The cellulose/SCBP films without and with alkali treated SCBP were characterized by FTIR, XRD, optical and polarized optical microscopy, thermogravimetric analysis (TGA) and tensile tests. The maximum tensile strength of the composite films with alkali treated SCBP varied between (106-149MPa) and increased with SCBP content when compared to the composites with untreated SCBP. The thermal stability of the composite was higher at elevated temperatures when alkali treated SCBP was used. Based on the improved tensile properties and photo resistivity, the cellulose/SCBP composite films with alkali treated SCBP may be considered for packaging and wrapping of flowers and vegetables.
    Matched MeSH terms: Recycling/methods*
  11. Using a contingent valuation approach for improved solid waste management facility: evidence from Kuala Lumpur, Malaysia
    Afroz R, Masud MM
    Waste Manag, 2011 Apr;31(4):800-8.
    PMID: 21169007 DOI: 10.1016/j.wasman.2010.10.028
    This study employed contingent valuation method to estimate the willingness to pay (WTP) of the households to improve the waste collection system in Kuala Lumpur, Malaysia. The objective of this study is to evaluate how household WTP changes when recycling and waste separation at source is made mandatory. The methodology consisted of asking people directly about their WTP for an additional waste collection service charge to cover the costs of a new waste management project. The new waste management project consisted of two versions: version A (recycling and waste separation is mandatory) and version B (recycling and waste separation is not mandatory). The households declined their WTP for version A when they were asked to separate the waste at source although all the facilities would be given to them for waste separation. The result of this study indicates that the households were not conscious about the benefits of recycling and waste separation. Concerted efforts should be taken to raise environmental consciousness of the households through education and more publicity regarding waste separation, reducing and recycling.
    Matched MeSH terms: Recycling/economics; Recycling/methods; Recycling/standards
  12. Fulltext Upgrade Recycling of Cast Iron Scrap Chips towards β-FeSi₂ Thermoelectric Materials
    Laila A, Nanko M, Takeda M
    Materials (Basel), 2014 Sep 04;7(9):6304-6316.
    PMID: 28788193 DOI: 10.3390/ma7096304
    The upgrade recycling of cast-iron scrap chips towards β-FeSi₂ thermoelectric materials is proposed as an eco-friendly and cost-effective production process. By using scrap waste from the machining process of cast-iron components, the material cost to fabricate β-FeSi₂ is reduced and the industrial waste is recycled. In this study, β-FeSi₂ specimens obtained from cast iron scrap chips were prepared both in the undoped form and doped with Al and Co elements. The maximum figure of merit (ZT) indicated a thermoelectric performance of approximately 70% in p-type samples and nearly 90% in n-type samples compared to β-FeSi₂ prepared from pure Fe and other published studies. The use of cast iron scrap chips to produce β-FeSi₂ shows promise as an eco-friendly and cost-effective production process for thermoelectric materials.
    Matched MeSH terms: Recycling
  13. Uniting the Global Gastroenterology Community to Meet the Challenge of Climate Change and Non-Recyclable Waste
    Leddin D, Omary MB, Veitch A, Metz G, Amrani N, Aabakken L, et al.
    Gastroenterology, 2021 11;161(5):1354-1360.
    PMID: 34629165 DOI: 10.1053/j.gastro.2021.08.001
    Matched MeSH terms: Recycling
  14. Fulltext Understanding the Effect of Internal and External Factors on Households' Willingness to Sort Waste in Dammam City, Saudi Arabia
    Labib OA, Manaf L, Sharaai AH, Zaid SSM
    Int J Environ Res Public Health, 2021 09 14;18(18).
    PMID: 34574604 DOI: 10.3390/ijerph18189685
    The acceleration of growth in the population in Saudi Arabia and the increase in municipal solid waste generation have caused a problem in Dammam city: an increase in solid waste production. Therefore, solid waste sorting is an important practice of municipal solid waste management. The main objectives in this research are understanding the effect of internal and external factors on household willingness in sorting waste in Dammam city and studying the attempts to construct a theoretical research model by adding market incentives, government facilitators, and awareness into the popular planned behaviour theory to explain residents' waste sorting intentions. The data collection and analysis are based on the questionnaire study, which is based on the questionnaire survey data from 450 households in Dammam. This study revealed that social influence significantly predicts households' willingness to sort and recycle, that is, to promote recycling. Additionally, the variable social influence has a significant but low influence on households' willingness to sort and recycle. The result of the structural equation model shows that perceived behavioural control significantly predicts households' willingness to sort and recycle waste. This finding is consistent with the theoretical expectation. Therefore, this research shows that attitude, social influence, perceived behavioural control, market incentives, government facilitators and awareness positively and significantly affect residents' waste sorting intentions. Additionally, this research corroborates the discrepancy between internal and external variables.
    Matched MeSH terms: Recycling
  15. Uncovering environmental performance patterns of plastic packaging waste in high recovery rate countries: An example of EU-27
    Fan YV, Čuček L, Si C, Jiang P, Vujanović A, Krajnc D, et al.
    Environ Res, 2024 Jan 15;241:117581.
    PMID: 37967705 DOI: 10.1016/j.envres.2023.117581
    Plastic consumption and its end-of-life management pose a significant environmental footprint and are energy intensive. Waste-to-resources and prevention strategies have been promoted widely in Europe as countermeasures; however, their effectiveness remains uncertain. This study aims to uncover the environmental footprint patterns of the plastics value chain in the European Union Member States (EU-27) through exploratory data analysis with dimension reduction and grouping. Nine variables are assessed, ranging from socioeconomic and demographic to environmental impacts. Three clusters are formed according to the similarity of a range of characteristics (nine), with environmental impacts being identified as the primary influencing variable in determining the clusters. Most countries belong to Cluster 0, consisting of 17 countries in 2014 and 18 countries in 2019. They represent clusters with a relatively low global warming potential (GWP), with an average value of 2.64 t CO2eq/cap in 2014 and 4.01 t CO2eq/cap in 2019. Among all the assessed countries, Denmark showed a significant change when assessed within the traits of EU-27, categorised from Cluster 1 (high GWP) in 2014 to Cluster 0 (low GWP) in 2019. The analysis of plastic packaging waste statistics in 2019 (data released in 2022) shows that, despite an increase in the recovery rate within the EU-27, the GWP has not reduced, suggesting a rebound effect. The GWP tends to increase in correlation with the higher plastic waste amount. In contrast, other environmental impacts, like eutrophication, abiotic and acidification potential, are identified to be mitigated effectively via recovery, suppressing the adverse effects of an increase in plastic waste generation. The five-year interval data analysis identified distinct clusters within a set of patterns, categorising them based on their similarities. The categorisation and managerial insights serve as a foundation for devising a focused mitigation strategy.
    Matched MeSH terms: Recycling
  16. U.S. plastic waste exports: A state-by-state analysis pre- and post-China import ban
    Bourtsalas ACT, Yepes IM, Tian Y
    J Environ Manage, 2023 Oct 15;344:118604.
    PMID: 37459814 DOI: 10.1016/j.jenvman.2023.118604
    This study analyzes the regional implications of China's 2017 import ban on plastic waste by examining U.S. census data. A statistically significant decrease in total U.S. plastic waste exports was found, dropping from about 1.4 million tons to 0.6 million tons in the post-ban period. California remained the top exporter, throughout both pre- and post-ban periods, while South Carolina exhibited the highest per capita exports. Malaysia emerged as the largest importer of U.S. plastic waste, followed by Vietnam, Indonesia, and Thailand. The ban also led to a change in the composition of the exported plastic waste. Ethylene polymers increased from 32.6% of total exports in the pre-ban period to 46.9% in the post-ban period. Other plastics (vinyl chloride polymers, styrene polymers, and for plastics not elsewhere specified or included) decreased from 67.4% of total exports in the pre-ban period to 53.1% in the post-ban period. Moreover, we found that exporting plastic waste has significant environmental and human health impacts. For example, the Global Warming Potential (GWP) decreased from 20 million tons CO2-eq in the scenario where 100% of plastics are exported, or 25 million tons exported from the U.S. since 2002, to -11.1 million tons CO2-eq in the scenario where 100% of plastics are treated domestically. Transportation exacerbates these impacts for exported waste scenarios, increasing to 5.4 million tons CO2-eq when plastics are exported by ship while decreasing to 0.9 million tons CO2-eq for domestic treatment. Although exporting plastic waste is initially cost-effective, our study highlights that investing in domestic waste management can yield significant long-term benefits, considering the environmental and public health impacts. Therefore, it is crucial to prioritize context-specific solutions to address the challenges of the evolving global plastic waste landscape.
    Matched MeSH terms: Recycling
  17. Turning plastics/microplastics into valuable resources? Current and potential research for future applications
    Tan H, Othman MHD, Chong WT, Kek HY, Wong SL, Nyakuma BB, et al.
    J Environ Manage, 2024 Apr;356:120644.
    PMID: 38522274 DOI: 10.1016/j.jenvman.2024.120644
    Plastics are a wide range of synthetic or semi-synthetic materials, mainly consisting of polymers. The use of plastics has increased to over 300 million metric tonnes in recent years, and by 2050, it is expected to grow to 800 million. Presently, a mere 10% of plastic waste is recycled, with approximately 75% ended up in landfills. Inappropriate disposal of plastic waste into the environment poses a threat to human lives and marine species. Therefore, this review article highlights potential routes for converting plastic/microplastic waste into valuable resources to promote a greener and more sustainable environment. The literature review revealed that plastics/microplastics (P/MP) could be recycled or upcycled into various products or materials via several innovative processes. For example, P/MP are recycled and utilized as anodes in lithium-ion (Li-ion) and sodium-ion (Na-ion) batteries. The anode in Na-ion batteries comprising PP carbon powder exhibits a high reversible capacity of ∼340 mAh/g at 0.01 A/g current state. In contrast, integrating Fe3O4 and PE into a Li-ion battery yielded an excellent capacity of 1123 mAh/g at 0.5 A/g current state. Additionally, recycled Nylon displayed high physical and mechanical properties necessary for excellent application as 3D printing material. Induction heating is considered a revolutionary pyrolysis technique with improved yield, efficiency, and lower energy utilization. Overall, P/MPs are highlighted as abundant resources for the sustainable production of valuable products and materials such as batteries, nanomaterials, graphene, and membranes for future applications.
    Matched MeSH terms: Recycling
  18. Fulltext Tunable Synthesis of Mesoporous Carbons from Fe₃O(BDC)₃ for Chloramphenicol Antibiotic Remediation
    Tran TV, Nguyen DTC, Le HTN, Bach LG, Vo DN, Hong SS, et al.
    Nanomaterials (Basel), 2019 Feb 10;9(2).
    PMID: 30744163 DOI: 10.3390/nano9020237
    Chloramphenicol (CAP) is commonly employed in veterinary clinics, but illegal and uncontrollable consumption can result in its potential contamination in environmental soil, and aquatic matrix, and thereby, regenerating microbial resistance, and antibiotic-resistant genes. Adsorption by efficient, and recyclable adsorbents such as mesoporous carbons (MPCs) is commonly regarded as a "green and sustainable" approach. Herein, the MPCs were facilely synthesized via the pyrolysis of the metal⁻organic framework Fe₃O(BDC)₃ with calcination temperatures (x °C) between 600 and 900 °C under nitrogen atmosphere. The characterization results pointed out mesoporous carbon matrix (MPC700) coating zero-valent iron particles with high surface area (~225 m²/g). Also, significant investigations including fabrication condition, CAP concentration, effect of pH, dosage, and ionic strength on the absorptive removal of CAP were systematically studied. The optimal conditions consisted of pH = 6, concentration 10 mg/L and dose 0.5 g/L for the highest chloramphenicol removal efficiency at nearly 100% after 4 h. Furthermore, the nonlinear kinetic and isotherm adsorption studies revealed the monolayer adsorption behavior of CAP onto MPC700 and Fe₃O(BDC)₃ materials via chemisorption, while the thermodynamic studies implied that the adsorption of CAP was a spontaneous process. Finally, adsorption mechanism including H-bonding, electrostatic attraction, π⁻π interaction, and metal⁻bridging interaction was proposed to elucidate how chloramphenicol molecules were adsorbed on the surface of materials. With excellent maximum adsorption capacity (96.3 mg/g), high stability, and good recyclability (4 cycles), the MPC700 nanocomposite could be utilized as a promising alternative for decontamination of chloramphenicol antibiotic from wastewater.
    Matched MeSH terms: Recycling
  19. Toward sustainable solid waste minimization by manufacturing firms in Malaysia: strengths and weaknesses
    Mallak SK, Ishak MB, Mohamed AF, Iranmanesh M
    Environ Monit Assess, 2018 Sep 06;190(10):575.
    PMID: 30191321 DOI: 10.1007/s10661-018-6935-5
    Malaysia is facing an increasing trend in industrial solid waste generation due to industrial development. Thus, there is a paramount need in taking practical actions and measurements to move toward sustainable industrial waste management. The main aim of this study is to assess practicing solid waste minimization by manufacturing firms. Analysis showed that majority of firms (92%) dispose of their wastes rather than utilize other sustainable waste management options. Also, waste minimization methods such as segregation of wastes, on-site recycle and reuse, improved housekeeping, and equipment modification were found to have significant contribution to waste reduction (p 
    Matched MeSH terms: Recycling
  20. Thermoseparating aqueous two-phase systems: Recent trends and mechanisms
    Leong YK, Lan JC, Loh HS, Ling TC, Ooi CW, Show PL
    J Sep Sci, 2016 Feb;39(4):640-7.
    PMID: 26447739 DOI: 10.1002/jssc.201500667
    Having the benefits of being environmentally friendly, providing a mild environment for bioseparation, and scalability, aqueous two-phase systems (ATPSs) have increasingly caught the attention of industry and researchers for their application in the isolation and recovery of bioproducts. The limitations of conventional ATPSs give rise to the development of temperature-induced ATPSs that have distinctive thermoseparating properties and easy recyclability. This review starts with a brief introduction to thermoseparating ATPSs, including its history, unique characteristics and advantages, and lastly, key factors that influence partitioning. The underlying mechanism of temperature-induced ATPSs is covered together with a summary of recent applications. Thermoseparating ATPSs have been proven as a solution to the demand for economically favorable and environmentally friendly industrial-scale bioextraction and purification techniques.
    Matched MeSH terms: Recycling
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links