Displaying publications 1 - 20 of 175 in total

Abstract:
Sort:
  1. Yusof ZA
    J. Periodontol., 1990 Dec;61(12):751-4.
    PMID: 2269916
    The objective of this report was to determine the radiographic patterns of alveolar bone loss in early-onset periodontitis (EOP) cases in a selected Malaysian population. The radiographs of 55 cases of EOP patients were examined and the radiographic patterns were classified as follows: Type I: bone destruction on first molars and/or incisors only; Type II: bone destruction on first molars and/or incisors and several additional teeth (less than 14 teeth); Type III: generalized bone destruction (greater than 14 teeth), but with involvement noticeably more extensive on the first molars and/or incisors; Type IV: generalized bone destruction (greater than 14 teeth), but with no more bone loss on the first molars and/or incisors than on other involved teeth. Sex, age, and missing teeth were also recorded. Out of 55 cases, 47 cases, 22 males and 25 females, were classified into the types mentioned above; the remaining 8 cases were excluded due to too many missing teeth. It was found that 7 (14.9%) were Type I; 12 (25.5%) were Type II; 7 (14.9%) were Type III; and 21 (44.7%) were Type IV. There was a predominance of first molar/incisor involvement in Types I, II, and III with the maxillary first molars most frequently involved followed by the mandibular central incisors. Type I occurred in the younger age group and Types II, III, and IV mainly in the older age group. It was concluded that EOP in this patient sample resembled that of western society.
    Matched MeSH terms: Molar/radiography
  2. Yusof Z
    J Oral Rehabil, 1991 Jan;18(1):95-102.
    PMID: 2051253
    The aim of this study was to determine the periodontal status in relation to the quality of the adjacent proximal tooth surface. The gingival index (GI) and probable pocket depth (PD) were measured in 144 contra-lateral pairs of sound vs. restored and 95 contra-lateral pairs of sound vs. carious surfaces in 124 patients. The restorations studied were silver amalgams and tooth-coloured filling materials, the margins of which were supragingival or level with the gingival margins. The results showed that the GI and PD were greater for both restored and carious tooth surfaces than for the contra-lateral sound surfaces. When all the teeth were grouped together, the differences in the mean values of GI and PD were statistically significant at the P less than or equal to 0.05 level. A comparison between restored and carious (non-paired) tooth surfaces revealed higher mean values of GI and PD for the latter, which were highly significant at the P less than 0.001 level. Thus the present study shows that proximal tooth surface quality influences the health status of the adjacent periodontium.
    Matched MeSH terms: Molar/pathology
  3. Yusof WZ, Ghazali MN
    J Am Dent Assoc, 1989 Apr;118(4):453-5.
    PMID: 2708724
    Presented is an unusual case of multiple external root resorption. Although the cause of this resorption was not determined, several possibilities are presented. Trauma from occlusion, periodontal and pulpal inflammation, and resorption of idiopathic origin are all discussed as possible causes.
    Matched MeSH terms: Molar*
  4. Yusof NAM, Noor E, Reduwan NH, Yusof MYPM
    Clin Oral Investig, 2021 Mar;25(3):923-932.
    PMID: 32535703 DOI: 10.1007/s00784-020-03380-8
    OBJECTIVES: The aim of this study was to evaluate the accuracy of cone beam computed tomography (CBCT), periapical radiograph, and intrasurgical linear measurements in the assessment of molars with furcation defects.

    MATERIALS AND METHODS: This parallel, single-blinded, randomised controlled trial (RCT) consisted of 22 periodontitis patients who had molar with advanced furcation involvement (FI). All patients followed the same inclusion criteria and were treated following the same protocol, except for radiographic evaluation (CBCT vs. periapical). This study proposed and evaluated five parameters that represent the extent and severity of furcation defects in molars teeth, including CEJ-BD (clinical attachment loss), BL-H (depth), BL-V (height), RT (root trunk), and FW (width).

    RESULTS: There were no statistically significant differences between CBCT and intrasurgical linear measurements for any clinical parameter (p > 0.05). However, there were statistically significant differences in BL-V measurements (p molars. Meanwhile, the sensitivity were 62.8% and 56.9% for CBCT and periapical, respectively.

    CONCLUSIONS: Overall, when compared to the intrasurgical measurements, CBCT provided better diagnostic, sensitivity, and quantitative information on CAL, height, depth, and width of the furcation defects than periapical radiograph.

    CLINICAL RELEVANCE: An accurate presurgical furcation diagnostic can guide the clinicians from the stage of diagnosis to definitive management so that unnecessary periodontal surgical interventions can be prevented.

    Matched MeSH terms: Molar
  5. Yulistiani D, Jelan ZA, Liang JB, Yaakub H, Abdullah N
    Asian-Australas J Anim Sci, 2015 Apr;28(4):494-501.
    PMID: 25656207 DOI: 10.5713/ajas.14.0406
    A digestibility study was conducted to evaluate the effects of supplementing mulberry foliage and urea rice-bran as a source of fermentable energy and protein to 12 sheep fed diets based on urea-treated rice straw (TRS). The three dietary treatments were: T1, TRS with mulberry; T2, TRS with 50% mulberry replaced with rice bran and urea; and T3, TRS with rice bran and urea. The study was arranged in a completely randomized design with four replications for each treatment. The sheep were fed one of the three diets and the supplements were offered at 1.2% of the body weight (BW) and the TRS was provided ad libitum. There were no differences (p>0.05) among the three treatment groups with respect to dry matter (DM) intake (76.8±4.2 g/kg BW(0.75)) and DM, organic matter (OM), and crude protein (CP) digestibility (55.3±1.22; 69.9±0.85; 46.3±1.65% respectively for DM, OM, and CP). The digestibility of fiber (neutral detergent fiber [NDF] and acid detergent fiber) was significantly lower (p<0.05) for T3 (46.2 and 46.6 respectively) compared to T1 (55.8 and 53.7 respectively) and T2 (54.1 and 52.8 respectively). Nitrogen (N) intake by sheep on diet T3 was significantly (p<0.05) higher than sheep fed diet T1. However, N balance did not differ among the three diets (3.0±0.32 g/d). In contrast, the rumen ammonia (NH3-N) concentrations in sheep fed T2 and T3 were significantly (p<0.05) higher than in sheep fed T1. The NH3-N concentrations for all three diets were above the critical value required for optimum rumen microbial growth and synthesis. Total volatile fatty acid concentrations were highest (p<0.05) in T1 (120.3 mM), whilst the molar proportion of propionic acid was highest in T3 (36.9%). However, the microbial N supply in sheep fed T1 and T3 was similar but was significantly (p<0.05) higher than for sheep fed T2. It was concluded that mulberry foliage is a potential supplement of fermentable energy and protein for sheep fed TRS based diet. The suggested level of supplementation is 1.2% of BW or 32% of the total diet since it resulted in similar effects on the intake of DM, OM, and NDF, digestibility of DM, OM, and CP, N utilization and microbial supply when compared to rice bran and urea supplementation.
    Matched MeSH terms: Molar
  6. Yahya, N.A., Youngson, C.C.
    Ann Dent, 2007;14(1):7-13.
    MyJurnal
    The purpose of this study were to compare the emergence profiles of crowns with their contralateral tooth, in vitro, and to determine if there is any association between the design of tooth preparations and the resultant emergence profile. 50 working models used for single crown construction were examined. Measurements of the faciolingual width of the crowns and contralateral teeth were taken using digital calipers. Internal line angles and the margin width of dies and the emergence profile of the corresponding crowns were measured from longitudinally sectioned polyvinylsiloxane indices mounted on a flat-bed scanner using image analysis software. Using Students t tests, no statistically significant differences (p>0.05) were found for shoulder width (mean 0.94 ± 0.23mm), internal line angle (mean 105.83 ± 13.57°) or emergence profiles (28.56 ± 12.95°) in the different (anterior, premolar or molar) preparations or crowns. The mean emergence profiles for all crowns was statistically significantly greater (p
    Matched MeSH terms: Molar
  7. Wong, Soo Yee, Roselinda Ab. Rahman, Haslina Taib
    MyJurnal
    The purpose of this study was to evaluate the periodontal status distal to the adjacent second molar following the extraction of a partially or fully impacted mandibular third molar at Klinik Pergigian Pakar Hospital Universiti Sains Malaysia (KPPHUSM) from April of 2008 until June of 2008.This was a prospective study which involved the clinical and radiological study of patients. In this study, convenience sampling method had been used. The sample size was 22 patients aged 18-32 years old with inclusion criteria. The outcomes measured in this study were periodontal pocket depth (PPD), clinical attachment level (CAL) and alveolar bone height (ABH). Subjects were examined at distal surface (disto-buccal, mid-distal and disto-lingual) of second molar for PPD and CAL before and 3 months after the impacted adjacent lower third molar extraction. OPG was taken each before and after the third molar removal. These data were analyzed using SPSS version 16 and Wilcoxon-signed-ranks test was used to compare the PPD, CAL and ABH pre and post operatively. All the results were not significant with p >0.05. For PPD, median = 3mm pre and post extraction. CAL median= 2mm pre and post operatively and ABH median of 3.10mm (before) and 2.8mm (after) the third molar removal. From our study, we concluded that there were no significant changes of PPD, CAL and ABH at distal side of second molar after 3 months of the adjacent impacted lower third molar removal.
    Study site: Dental clinics, Hospital Universiti Sains Malaysia (HUSM), Kelantan, Malaysia
    Matched MeSH terms: Molar; Molar, Third
  8. Wey MC, Shim CN, Lee MY, Jamaluddin M, Ngeow WC
    Aust Orthod J, 2012 May;28(1):17-21.
    PMID: 22866589
    This study aimed to establish a safety zone for the placement of mini-implants in the buccal surface between the second maxillary premolar (PM2) and first maxillary molar (M1) of Mongoloids.
    Matched MeSH terms: Molar
  9. Western JS, Gupta VV, Ramachandra SS
    Compend Contin Educ Dent, 2019 Mar;40(3):172-177.
    PMID: 30829499
    This case report describes the management of a mandibular first molar with an additional distolingual root (radix entomolaris) and grade III cervical enamel projection through a multidisciplinary approach. Diagnosis for the case was endodontic-periodontal lesion due to non-vitality and associated advanced periodontal destruction. The patient was treated with drainage of the periodontal abscess with adjunct antibiotics, phase I periodontal therapy, endodontic therapy, radiculoplasty, regenerative periodontal therapy, replacement of the missing right mandibular second molar, and long-term maintenance. Follow-up of the patient up to 9 months has been uneventful. Cases of advanced periodontal destruction typically show some degree of tooth mobility, which was absent in this case. The article discusses the tripod effect as well as the increased surface area for periodontal attachment provided by the additional root contributing to the non-mobility of the involved tooth.
    Matched MeSH terms: Molar/abnormalities*
  10. Wang CY, Chiu CL, Har KO, Chan C, Rahman ZA
    Int J Oral Maxillofac Surg, 2002 Oct;31(5):506-10.
    PMID: 12418566
    This study compares the use of inhalation sedation using sevoflurane (group S) with inhalation sedation using nitrous oxide (group N) in patients undergoing bilateral extraction of third molar teeth under local anaesthesia. The study was designed as a cross-over study. Seventeen ASA I, day surgery patients were studied. Patients were randomly allocated to receive either 8 l/min 50% nitrous oxide in oxygen (group N) or same flow of 1% sevoflurane (group S) for the first procedure. Each patient then had the alternate method of sedation for the second procedure. There were no significant differences between the methods in patient co-operation and surgeon's satisfaction with sedation. Psychomotor tests were comparable in both groups. The patients were significantly more sedated in the group S compared to group N (P=0.004). Significantly more patients complained of an unpleasant odour group S (P<0.01) but none withdrew from the study for this reason. No adverse cardiorespiratory effects resulted from sevoflurane or nitrous oxide sedation. Both methods gave good amnesia during the procedure. There was high acceptance of both methods and the patients rated the technique as equally satisfactory. We conclude that inhalation sedation with sevoflurane is a suitable alternative method to nitrous oxide sedation.
    Matched MeSH terms: Molar, Third/surgery
  11. Wan Nur Alwani Wan Abdul Aziz, Azlan Jaafar, Ahmad Dzulfikar Samsudin
    MyJurnal
    The effect of surgical removal of impacted third molars on the periodontal
    parameters of adjacent second molar revealed inconsistent results. Some authors suggested
    improvement of periodontal parameters distal to second molar, whilst others demonstrated loss of
    attachment and reduction of alveolar bone height. This study was conducted to evaluate the
    alveolar bone height (ABH) and periodontal status of second molar after the surgery. (Copied from article).
    Matched MeSH terms: Molar; Molar, Third
  12. Veerabhadrappa SK, Hesarghatta Ramamurthy P, Yadav S, Bin Zamzuri AT
    Acta Odontol Scand, 2021 Oct;79(7):514-522.
    PMID: 33764264 DOI: 10.1080/00016357.2021.1901984
    OBJECTIVE: To perform a systematic review of the characteristics of ectopic mandibular third molar (EMTM) in terms of its clinical presentation, radiographic findings, associated lesions, management and post-operative complications.

    MATERIALS AND METHODS: We searched the Pubmed, Medline, Embase and EBSCO databases for full-text, peer-reviewed journal publications from January 1965 to August 2020. Data extraction was done using preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines.

    RESULTS: Our search yielded 45 case reports involving 48 EMTM teeth. The mean age of the patients was 46.3 years with an age range of 22-80 years. Thirty-two cases were seen in women as compared to 13 cases in men. The majority of the cases (42) were unilateral, with only three bilateral cases. Among the 48 EMTM teeth, 21 were seen in the condylar region followed by 13 in the ramus, seven in the sigmoid notch, three in the angle and two each in the coronoid process and the lower border of the mandible. Twenty-five EMTM teeth had histopathologically confirmed dentigerous cysts, eight teeth had chronic infection/inflammation/granulation tissue, two had radicular cysts, two had infected cysts, two teeth had normal follicular spaces, and associated lesions were not mentioned for nine teeth. The most common symptoms were swelling (33 teeth) and pain (29 teeth), and six teeth were asymptomatic. Surgical removal through intraoral approach was carried out for 27 teeth, while an extra-oral approach was adopted in 15 teeth, a spontaneous regression of the pericoronal radiolucency was noticed in one tooth, four teeth were not treated and choice of treatment was not mentioned for one tooth. Mild transient paraesthesia was frequently observed; however, serious post-surgical complications were not reported.

    CONCLUSIONS: The present review found that EMTM can present with complex clinicopathological characteristics, with a majority of the cases being asymptomatic in the beginning and turning out to be symptomatic with lesions at later stages, requiring surgical intervention.

    Matched MeSH terms: Molar
  13. Ujjal Kumar Ghosh, Chiu, Choon Hong, Jobrun Nandong, Shufeng, Shen
    MyJurnal
    In this paper, a mathematical model is developed based on mass and momentum balance for carbon dioxide absorption into aqueous ammonia solution. The model is simplified based on the assumption that the CO2 absorption into aqueous ammonia is a pseudo-first-order reaction. Laplace transform method is applied in order to solve the partial differential model equation. Finally, the CO2 molar flux is expressed as a function of partial pressure of CO2, concentration of aqueous ammonia, temperature and gas-liquid contact area. Variation of CO2 molar flux with partial pressure of CO2 and temperature is discussed and a comparison is performed with experimental data from literature. Variation of CO2 molar flux is also shown with gas-liquid contact area. The calculated flux from the model follows the same trend as that of the experimental data reported in literature and the accuracy is within the accepted limit. The mathematical model is very helpful to predict the CO2 molar flux as a function of partial pressure of CO2, concentration of aqueous ammonia, temperature and gas-liquid contact area.
    Matched MeSH terms: Molar
  14. Thomas LA, Thomas LR, Balla SB, Gopalaiah H, Kanaparthi A, Sai Sravanthi G, et al.
    Leg Med (Tokyo), 2021 Feb;48:101814.
    PMID: 33246253 DOI: 10.1016/j.legalmed.2020.101814
    In the context of dental age assessment, two significant factors can be studied; tooth mineralisation and tooth emergence. Little is known about the role of a second molar eruption in forensic age estimation. This paper aims to contribute to forensic age estimation using an age threshold of 14 years, studying the eruption stages of permanent mandibular premolars and second molars. Totally 640 orthopantomograms (OPGs) of south Indian children, aged between 10 and 18 years, were evaluated using Olze et al. staging of tooth eruption stages (A-D). Spearman's rho correlation showed a strong, positive, and statistically significant correlation between the chronological age and the eruption stages of both sexes' teeth. Accuracy, sensitivity, specificity, likelihood ratios, and post-test probability values were calculated for all tested teeth. The best performance to discriminate individuals above or below 14 years showed stage D in second molars. The sensitivity varied between 89% and 94% and specificity between 75% and 84%, respectively. Receiver operating characteristic curve analysis revealed high diagnostic performance for stage D, with area under the ROC curve (AUC) values of 84% and 85% for tooth 37 and 85% and 83% for tooth 47 in males and females, respectively. In conclusion, it is possible to predict age over 14 years in south Indian children using tooth emergence stages from OPGs with a relatively high interobserver agreement and good diagnostic accuracy. However, there are some limitations and, therefore, must be used in conjunction with other methods.
    Matched MeSH terms: Molar
  15. Thomas AR, Reddy TVK, Tan JY, Qing SEJ, Qing CS, Xuan LY, et al.
    J Contemp Dent Pract, 2023 Apr 01;24(4):221-227.
    PMID: 37469260 DOI: 10.5005/jp-journals-10024-3471
    AIM: The purpose of this study was to evaluate and compare the canal transportation tendencies and centering ability of the TruNatomy shaper (TN) and XP-endo shaper (XPS) rotary systems in oval-shaped canals with moderate root curvature (15°-25°), using cone-beam computed tomography (CBCT) imaging.

    MATERIALS AND METHODS: Sixty single-rooted permanent human teeth were chosen after considering the inclusion and exclusion criteria. The teeth were divided into two groups (n = 30). The test group was instrumented with TN files and the other with XPS according to manufacturer's instructions. CBCT images were taken before and after instrumentation to record the root canal distances from mesial, distal, buccal, and lingual borders of the root at 3, 5, and 7 mm distances from the root apex using a specific formula. Statistical analysis was done using the Statistical Package for the Social Sciences software program, version 20.0. The data were analyzed using the unpaired t test.

    RESULTS: Both TN and XPS were safe for use in oval-shaped canals with moderate root curvature. However, the XPS showed higher buccolingual transportation as compared with TN at 3 mm from the apex and higher mesiodistal transportation at 3 and 5 mm levels from the apex as compared with TN.

    CONCLUSION: Canal transportation has been detected in both systems; however, the values obtained were within the safe range (<0.3 mm). Overall, no significant difference was observed between TN and XPS (p > 0.05) in their canal transportation tendencies and centering ability.

    CLINICAL SIGNIFICANCE: The study assesses the canal centering and transportation tendencies of the recently launched TN rotary system in extracted teeth with a combination of morphologies. The findings of the study are significant clinically as minimum transportation of the canal, minimal dentin removal, efficient disinfection, and three-dimensional obturation of the root canal are considered important factors in deciding the prognosis of endodontic therapy.

    Matched MeSH terms: Molar
  16. Tengku Shaeran TA, Shaari R, Abdul Rahman S, Alam MK, Muhamad Husin A
    J Oral Biol Craniofac Res, 2017 Jan-Apr;7(1):7-12.
    PMID: 28316914 DOI: 10.1016/j.jobcr.2016.10.007
    BACKGROUND: Bilateral sagittal split osteotomy (BSSO) is the most versatile procedure and adopted by many surgeons to relocate the mandible in patients having mandibular prognathism (MP). Injury to the inferior alveolar nerve (IAN) and unfavorable splits are two surgical complications of BSSO which are associated with mandibular morphology. Uses of cone beam computed tomography (CBCT) in providing 3-D images has gained a wider acceptance in surgical field nowadays. Its advantages are including reduced cost, lesser radiation dose and smaller physical footprint comparing to the conventional computed tomography.

    PURPOSE: This study aims to identify the differences in morphology of prognathic and non-prognathic mandible at BSSO sites using cone beam computed tomography images.

    METHODS: This retrospective study involved 51 CBCT images of patients having mandibular prognathism and without mandibular prognathism. The latter group made up from patients with Class I skeletal pattern. Samples were taken using purposive sampling method from two clinical centers.

    RESULT: Prognathic mandible has higher lingula level, superiorly and buccally placed inferior alveolar nerve canal at distal second molar, thinner mediolateral width of ramus at anterior and posterior part and thinner anteroposterior width of the ramus.

    CONCLUSION: Morphology of mandible in patients with mandibular prognathism (MP) was significantly different from patients without mandibular prognathism (WMP) for most of the parameters. The high risk parameters may be highlighted to the patients using cone beam computed tomography images.
    Matched MeSH terms: Molar
  17. Tay C. L., Law M. C.
    MyJurnal
    The modelling of a three-dimensional (3-D) molten carbonate fuel cell (MCFC) was developed to study the effects of gas flow direction (co-flow and counter-flow) in anode and cathode on the generated power density by solving the mass and momentum conservation equations, electrochemical reaction and heat transfer. The simulation result of the co-flow temperature distribution was compared with the experimental data obtained from open literature. The molar fraction distribution of gases in the anode and cathode gas channels and temperature distribution across the cell were compared between two different flow directions. Furthermore, the performance of MCFC, which operates in the temperature range of 823 - 1023 K, was analysed by comparing the generated power density. The results showed that MCFC with co-flow attained higher power density compared to that of counter-flow at 873 K. However, at higher temperature of 1023 K, the generated power density was the same for both gas flow directions.
    Matched MeSH terms: Molar
  18. Taha NA, Al-Rawash MH, Imran ZA
    Int Endod J, 2022 May;55(5):416-429.
    PMID: 35152464 DOI: 10.1111/iej.13707
    AIM: The aim of the study was to compare the outcome of full pulpotomy using 2 calcium silicate-based materials compared with mineral trioxide aggregate (MTA) in symptomatic mature permanent teeth with carious pulp exposure.

    METHODOLOGY: This study was designed as a parallel, double blind, randomized controlled trial where symptomatic mature permanent teeth with carious pulp exposure meeting the inclusion criteria were randomly treated with full pulpotomy using one of 3 calcium silicate-based materials (ProRoot MTA, Biodentine and TotalFill). Full pulpotomy was performed, and haemostasis was achieved via a cotton pellet moistened with 2.5% NaOCl. A 3-mm layer of the calcium silicate-based material was randomly placed as the pulpotomy agent through a block randomization process followed by a resin-based composite restoration. Postoperative periapical radiograph was taken. Clinical and radiographic evaluation were completed after 6 months and 1 year. The patient and evaluator were blinded to the type of materials used. Pain levels were scored preoperatively and 7 days after treatment. Effect of potential prognosis factors including gender, age, diagnosis, bleeding time and type of caries were also analysed.

    RESULTS: One hundred and sixty-four teeth in 146 patients received full pulpotomy and were randomly assigned to either the tested or control material through block randomization technique (50 MTA, 50 Biodentine and 64 TotalFill). The age ranged from 10 to 70 years. The diagnosis was irreversible pulpitis in 112 teeth (72%) and reversible pulpitis in 28 teeth (28%). The majority of patients presented with severe pain, during the first week 96.9% reported complete relief of pain or mild pain. Four cases had immediate failure. At 6 months the overall success rate was 92.2%, over 1 year 156/164 teeth attended follow-up with 12 failures (2 restorative failures and 10 endodontic failures), the overall success of pulpotomy at 1 year was 92.3% (144/156); 91.8% in MTA, 93.3% in Biodentine and 91.9% in TotalFill with no significant difference amongst the groups and no side effects observed. No significant association was evident between outcome and the investigated variables.

    CONCLUSIONS: The 1-year success rate of full pulpotomy did not differ significantly between Biodentine pulpotomy, TotalFill pulpotomy, and MTA pulpotomy. The study was registered with clinical trials; registration number (NCT04345263).

    Matched MeSH terms: Molar/surgery
  19. Syarida Hasnur Safii, Lily Azura Shoaib, Halimah Awang
    Sains Malaysiana, 2013;42:107-114.
    The objectives of this study were to determine the prevalence of caries and gingivitis in a selected population of schoolchildren and to examine the relationship between prevalence of the diseases with their oral health behaviours. A total of 39 subjects, aged nine to 11 years, from 147 schoolchildren of a private school in Selangor, Malaysia were examined by two calibrated examiners trained in their own field. The subjects were interviewed using structured questionnaires. Erupted first permanent molars and permanent anterior teeth were examined. Dental caries, Plaque Score and Gingival Index were recorded. Descriptive statistics using frequency distribution were used to analyse the data. Forty-one percent of the subjects presented with more than 75% of total plaque accumulation. Prevalence of caries and gingivitis for the subject population was 18.0% and 31.0%, respectively. Caries was found on both the smooth (buccal/lingual/palatal) and occlusal surfaces. Gingivitis, diagnosed around 31.6% of teeth, was found more on the incisors (16.9%) than molars (14.7%). A relatively higher distribution of gingivitis was found on labial aspect of the incisors (5.5%) and palatal/ lingual aspect of the molars (4.7%). The prevalence of caries and gingivitis in this selected population was low. Certain dentition sites were more susceptible to dental caries and gingivitis. Good tooth brushinghabits and regular visits to the dentists do not guarantee the efficacy of plaque removal.
    Matched MeSH terms: Molar
  20. Surendran S, Thomas E
    Am J Orthod Dentofacial Orthop, 2014 Jan;145(1):7-14.
    PMID: 24373650 DOI: 10.1016/j.ajodo.2013.09.007
    The objective of this study was to determine whether dental calcification can be used as a first-level diagnostic tool for assessment of skeletal maturity.
    Matched MeSH terms: Molar/growth & development; Molar/radiography
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links