Displaying all 15 publications

Abstract:
Sort:
  1. Nurul Akhma Zakaria, Ahmad Abas Kutty
    Sains Malaysiana, 2018;47:2601-2608.
    Masalah pencemaran sumber air tawar dan kesan ketoksikan logam telah mendapat perhatian di serata negara. Dua
    spesies organisma air tawar daripada filum moluska Filopaludina sumatrensis dan Corbicula fluminea didedahkan
    kepada tiga logam terpilih iaitu arsenik (As) kromium (Cr) dan selenium (Se) pada kepekatan berbeza selama 96 jam di
    dalam makmal terkawal. Kadar kematian dinilai serta kepekatan kematian median (LC50) dan masa kematian median
    (LT50) dihitung. Nilai LC50 dan LT50 didapati menurun dengan pertambahan masa dan kepekatan pendedahan bagi
    kedua-dua spesies dan kesemua logam. Keputusan daripada kajian ini memperlihatkan ketoksikan logam As, Cr dan Se
    semakin meningkat dengan peningkatan kepekatan dan masa pendedahan logam kepada F. sumatrensis dan C. fluminea.
    Nilai LC50 96 jam As, Cr dan Se bagi F. sumatrensis adalah 4.22, 3.78 dan 45.92 mg/L dan 11.84, 2.23 dan 35.63 mg/L
    masing-masing bagi C. fluminea. Keputusan menunjukkan Cr adalah logam paling toksik terhadap F. sumatrensis dan
    C. fluminea. Trend ketoksikan logam bagi kedua-dua moluska ini adalah sama iaitu Cr > As > Se.
    Matched MeSH terms: Selenium Compounds
  2. Muhammad F, Tahir M, Zeb M, Kalasad MN, Mohd Said S, Sarker MR, et al.
    Sci Rep, 2020 Mar 16;10(1):4828.
    PMID: 32179797 DOI: 10.1038/s41598-020-61602-1
    This paper reports the potential application of cadmium selenide (CdSe) quantum dots (QDs) in improving the microelectronic characteristics of Schottky barrier diode (SBD) prepared from a semiconducting material poly-(9,9-dioctylfluorene) (F8). Two SBDs, Ag/F8/P3HT/ITO and Ag/F8-CdSe QDs/P3HT/ITO, are fabricated by spin coating a 10 wt% solution of F8 in chloroform and 10:1 wt% solution of F8:CdSe QDs, respectively, on a pre-deposited poly(3-hexylthiophene) (P3HT) on indium tin oxide (ITO) substrate. To study the electronic properties of the fabricated devices, current-voltage (I-V) measurements are carried out at 25 °C in dark conditions. The I-V curves of Ag/F8/P3HT/ITO and Ag/F8-CdSe QDs/P3HT/ITO SBDs demonstrate asymmetrical behavior with forward bias current rectification ratio (RR) of 7.42 ± 0.02 and 142 ± 0.02, respectively, at ± 3.5 V which confirm the formation of depletion region. Other key parameters which govern microelectronic properties of the fabricated devices such as charge carrier mobility (µ), barrier height (ϕb), series resistance (Rs) and quality factor (n) are extracted from their corresponding I-V characteristics. Norde's and Cheung functions are also applied to characterize the devices to study consistency in various parameters. Significant improvement is found in the values of Rs, n, and RR by 3, 1.7, and 19 times, respectively, for Ag/F8-CdSe QDs/P3HT/ITO SBD as compared to Ag/F8/P3HT/ITO. This enhancement is due to the incorporation of CdSe QDs having 3-dimensional quantum confinement and large surface-to-volume area. Poole-Frenkle and Richardson-Schottky conduction mechanisms are also discussed for both of the devices. Morphology, optical bandgap (1.88 ± 0.5 eV) and photoluminescence (PL) spectrum of CdSe QDs with a peak intensity at 556 nm are also reported and discussed.
    Matched MeSH terms: Selenium Compounds
  3. Do TN, Khyasudeen MF, Nowakowski PJ, Zhang Z, Tan HS
    Chem Asian J, 2019 Nov 18;14(22):3992-4000.
    PMID: 31595651 DOI: 10.1002/asia.201900994
    The frequency fluctuation correlation function (FFCF) measures the spectral diffusion of a state's transition while the frequency fluctuation cross-correlation function (FXCF) measures the correlation dynamics between the transitions of two separate states. These quantities contain a wealth of information on how the chromophores or excitonic states interact and couple with its environment and with each other. We summarize the experimental implementations and theoretical considerations of using two-dimensional electronic spectroscopy to characterize FFCFs and FXCFs. Applications can be found in systems such as the chlorophyll pigment molecules in light-harvesting complexes and CdSe nanomaterials.
    Matched MeSH terms: Selenium Compounds
  4. Ismarulyusda Ishak, Hidayatulfathi Othman, Nihayah Mohammad, Syarif Husin Lubis, Zariyantey Abdul Hamid, Nur Zakiah Mohd Saat, et al.
    MyJurnal
    Pendedahan terhadap pestisid dapat menyebabkan penurunan paras unsur surih di dalam badan manusia. Unsur surih memainkan peranan penting dalam metabolisma tubuh. Kajian ini dijalankan untuk mengkaji paras unsur surih selenium, zink dan kromium dalam kalangan pesawah yang terdedah kepada pestisid di Wilayah I, MADA, Perlis. Kajian keratan rentas ini melibatkan 70 orang pesawah dan 57 orang yang tinggal di perkampungan nelayan sebagai kumpulan kawalan yang berumur di antara 21 hingga 80 tahun. Maklumat sosiodemografi pesawah dilakukan melalui temuduga borang soal selidik yang telah divalidasi. Pemeriksaan tekanan darah dan glukosa darah pesawah dilakukan. Paras selenium, zink dan kromium sampel kuku dan rambut dianalisis dengan menggunakan kaedah penghadaman asid dan mesin Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Hasil kajian mendapati bahawa paras selenium pada rambut (5.11 ± 17.05 μg/L) dan kuku (4.92 ± 2.17 μg/L) adalah lebih rendah secara signifikannya (p < 0.05) berbanding paras selenium pada rambut (15.67 ± 10.59 μg/L) dan kuku (6.67 ± 2.81 μg/L) kumpulan kawalan. Paras kromium pada rambut (31.83 ± 15.17 μg/L) dan kuku (87.64 ± 23.30 μg/L) kumpulan pesawah juga didapati lebih rendah secara signifikannya (p < 0.05) berbanding paras kromium pada rambut (85.19 ± 56.90 μg/L) dan kuku (99.36 ± 56.89 μg/L) pada kumpulan kawalan. Walau bagaimanapun, tiada perbezaan paras unsur surih yang signifikan (p > 0.05) menurut tempoh pendedahan pestisid. Kesimpulannya, paras selenium dan kromium pada kuku dan rambut pesawah yang terdedah kepada pestisid adalah lebih rendah berbanding kumpulan komuniti nelayan.

    Matched MeSH terms: Selenium Compounds
  5. Jin Liang, Pradeep Puligundla, Sanghoon Ko, Xiao-Chun Wan
    Sains Malaysiana, 2014;43:1685-1692.
    Selenium (Se) has been recognized as an essential nutrient for humans. Plant foods are the predominant source of selenium and majority of dietary selenium is absorbed depending on the type of food consumed. Nowadays, green tea is becoming increasingly popular for its prominent health benefits, including the ability to supplement selenium in organically bound, natural food form. The selenium content of Se-enriched green tea is influenced by the selenium level of local soils in which it is grown. However, selenium content of plants can also be improved by artificial fortification methods. In this review, the chemical speciation and biological functions of selenium, fortification methods, biological activities and nutraceutical applications of Se-enriched green tea are discussed. This review provides insights into the current research and the importance of Se-enriched green tea in the enrichment of human nutrition and health.
    Matched MeSH terms: Selenium Compounds
  6. Lai CW, Samsudin NA, Low FW, Abd Samad NA, Lau KS, Chou PM, et al.
    Materials (Basel), 2020 Jun 03;13(11).
    PMID: 32503128 DOI: 10.3390/ma13112533
    In this present work, we report the deposition of cadmium selenide (CdSe) particles on titanium dioxide (TiO2) nanotube thin films, using the chemical bath deposition (CBD) method at low deposition temperatures ranging from 20 to 60 °C. The deposition temperature had an influence on the overall CdSe-TiO2 nanotube thin film morphologies, chemical composition, phase transition, and optical properties, which, in turn, influenced the photoelectrochemical performance of the samples that were investigated. All samples showed the presence of CdSe particles in the TiO2 nanotube thin film lattice structures with the cubic phase CdSe compound. The amount of CdSe loading on the TiO2 nanotube thin films were increased and tended to form agglomerates as a function of deposition temperature. Interestingly, a significant enhancement in photocurrent density was observed for the CdSe-TiO2 nanotube thin films deposited at 20 °C with a photocurrent density of 1.70 mA cm-2, which was 17% higher than the bare TiO2 nanotube thin films. This sample showed a clear surface morphology without any clogged nanotubes, leading to better ion diffusion, and, thus, an enhanced photocurrent density. Despite having the least CdSe loading on the TiO2 nanotube thin films, the CdSe-TiO2 nanotube thin films deposited at 20 °C showed the highest photocurrent density, which confirmed that a small amount of CdSe is enough to enhance the photoelectrochemical performance of the sample.
    Matched MeSH terms: Selenium Compounds
  7. Tiekink ER
    Dalton Trans, 2012 Jun 7;41(21):6390-5.
    PMID: 22252404 DOI: 10.1039/c2dt12225a
    Despite being disparaged for their malodorous and toxic demeanour, compounds of selenium, a bio-essential element, and tellurium, offer possibilities as therapeutic agents. Herein, their potential use as drugs, for example, as anti-viral, anti-microbial, anti-inflammatory agents, etc., will be surveyed along with a summary of the established biological functions of selenium. The natural biological functions of tellurium remain to be discovered.
    Matched MeSH terms: Selenium Compounds/therapeutic use*; Selenium Compounds/chemistry*
  8. George GN, Gailer J, Ponomarenko O, La Porte PF, Strait K, Alauddin M, et al.
    J Inorg Biochem, 2016 05;158:24-29.
    PMID: 26883676 DOI: 10.1016/j.jinorgbio.2016.01.022
    Certain arsenic and selenium compounds show a remarkable mutual cancelation of toxicities, where a lethal dose of one can be voided by an equimolar and otherwise lethal dose of the other. It is now well established that the molecular basis of this antagonism is the formation and biliary excretion of seleno bis-(S-glutathionyl) arsinium anion [(GS)2AsSe](-). Previous work has definitively demonstrated the presence of [(GS)2AsSe](-) in rabbit bile, but only in the presence of other arsenic and selenium species. Rabbits have a gall bladder, which concentrates bile and lowers its pH; it seems likely that this may be responsible for the breakdown of biliary [(GS)2AsSe](-). Since rats have no gall bladder, the bile proceeds directly through the bile duct from the hepatobiliary tree. In the present work we have shown that the primary product of biliary co-excretion of arsenic and selenium in rats is [(GS)2AsSe](-), with essentially 100% of the arsenic and selenium present as this species. The chemical plausibility of the X-ray absorption spectroscopy-derived structural conclusions of this novel arsenic and selenium co-excretion product is supported by density functional theory calculations. These results establish the biomolecular basis to further explore the use of selenium dietary supplements as a possible palliative for chronic low-level arsenic poisoning of human populations.
    Matched MeSH terms: Selenium Compounds/metabolism*; Selenium Compounds/chemistry
  9. Chai YC, Jun HK
    J Nanosci Nanotechnol, 2019 Jun 01;19(6):3505-3510.
    PMID: 30744778 DOI: 10.1166/jnn.2019.16099
    Nanosize semiconductors have been used as active sensitizers for the application of quantum dot-sensitized solar cells (QDSSC). "Green" sensitizers are introduced as an alternative for the toxic Cd and Pb based compounds. In this work, Bi₂S₃ quantum dots (QDs) were fabricated and used as sensitizers in QDSSC. QDs were grown on TiO₂ electrode via solution dipping process. Although the performance of "green" QDSSC is not as high as that of CdS or CdSe based QDSSCs, its performance can be enhanced with post heat treatment. The effect is dependent on the heat treatment temperature profile where gradual increase of sintering temperature is preferred. The effects of post heat treatment on Bi₂S₃ sensitized TiO₂ electrodes are investigated and discussed.
    Matched MeSH terms: Selenium Compounds
  10. Sabar Bauk, Abd. Aziz Tajuddin
    MyJurnal
    The linear and the mass attenuation coefficients of Rhizophora spp. wood in the photon energy range of 11.22 - 28.43 keV were determined. This was done by studying the attenuation of x-ray fluorescent (XRF) photons from selenium, molybdenum, silver and tin targets. Both the Kα and Kβ peaks were utilised. The results were compared with theoretical values for average breast tissues for youngage, middle-age and old-age groups calculated by using a XCOM computer programme. The mass attenuation coefficient of Rhizophora spp. was found to be close to that of the calculated young-age breast in this photon energy range.
    Matched MeSH terms: Selenium Compounds
  11. Kee LH, Ying Chyi JL, Zainal Abidin Talib, Mohammad Shuhazlly Mamat, Hong Ngee JL, Fakhrurrazi Ashari, et al.
    Sains Malaysiana, 2016;45:1201-1206.
    Zinc selenide/graphene oxide (ZnSe/GO) composite is synthesized using hydrothermal method. Two different methods
    such as direct and indirect route have been investigated to form the ZnSe/GO composite. In this research, the graphene
    oxide used was in sheet and liquid form. The synthesized composite was then characterized using X-ray diffraction (XRD)
    for phase identification, field emission scanning electron microscopy (FESEM) for morphology analysis and ultravioletvisible
    spectroscopy (UV-Vis) for optical properties. ZnSe/GO composite showed absorption peak ranging from 460 to
    480 nm with the optical band gap obtained through Tauc equation. The optical band gap of the ZnSe/GO composite has
    been tuned down to a smaller value as compared to the bulk ZnSe compound. The optical band gap has been reduced
    to around 2.53 eV when liquid graphene oxide was used while around 2.23 to 2.32 eV when graphene oxide sheet was
    used. The purity of ZnSe/GO composite synthesis via indirect hydrothermal method is higher than those synthesized via
    direct hydrothermal method. The type of graphene oxide will affect the morphology of the composite where the ZnSe
    compound was either wrapped by tiny thorn-like substance or graphene oxide layer.
    Matched MeSH terms: Selenium Compounds
  12. Hushiarian R, Yusof NA, Abdullah AH, Ahmad SA, Dutse SW
    Molecules, 2014 Apr 09;19(4):4355-68.
    PMID: 24722589 DOI: 10.3390/molecules19044355
    Although nanoparticle-enhanced biosensors have been extensively researched, few studies have systematically characterized the roles of nanoparticles in enhancing biosensor functionality. This paper describes a successful new method in which DNA binds directly to iron oxide nanoparticles for use in an optical biosensor. A wide variety of nanoparticles with different properties have found broad application in biosensors because their small physical size presents unique chemical, physical, and electronic properties that are different from those of bulk materials. Of all nanoparticles, magnetic nanoparticles are proving to be a versatile tool, an excellent case in point being in DNA bioassays, where magnetic nanoparticles are often used for optimization of the hybridization and separation of target DNA. A critical step in the successful construction of a DNA biosensor is the efficient attachment of biomolecules to the surface of magnetic nanoparticles. To date, most methods of synthesizing these nanoparticles have led to the formation of hydrophobic particles that require additional surface modifications. As a result, the surface to volume ratio decreases and nonspecific bindings may occur so that the sensitivity and efficiency of the device deteriorates. A new method of large-scale synthesis of iron oxide (Fe3O4) nanoparticles which results in the magnetite particles being in aqueous phase, was employed in this study. Small modifications were applied to design an optical DNA nanosensor based on sandwich hybridization. Characterization of the synthesized particles was carried out using a variety of techniques and CdSe/ZnS core-shell quantum dots were used as the reporter markers in a spectrofluorophotometer. We showed conclusively that DNA binds to the surface of ironoxide nanoparticles without further surface modifications and that these magnetic nanoparticles can be efficiently utilized as biomolecule carriers in biosensing devices.
    Matched MeSH terms: Selenium Compounds/chemistry*
  13. Hanachi P, Loh LN, Fauziah O, Rafiuz ZH, Tee ST, Lye CW, et al.
    Med J Malaysia, 2004 May;59 Suppl B:208-9.
    PMID: 15468891
    Neem, Azadirachta indica, is a plant from the family Meliaceae, known as "Pokok Semambu" in Malay community. It has been extensively used in India as traditional Ayurvedic and folklore minedicine for the treatment of various diseases. This study aimed to determine the distribution of selenium in the liver of rats during hepatocarcinogenesis when neem aqueous extract and dietary selenium was supplemented.
    Matched MeSH terms: Selenium Compounds/pharmacology*
  14. Hutagalung, Sabar D., Eng, Siew T., Zainal A. Ahmad, Ishak Mat, Yussof Wahab
    MyJurnal
    One-dimensional nanostructure materials are very attractive because of their electronic and optical properties depending on their size. It is well known that properties of material can be tuned by reducing size to nanoscale because at the small sizes, that they behave differently with its bulk materials and the band gap will control by the size. The tunability of the band gap makes nanostructured materials useful for many applications. As one of the wide band gaps semiconductor compounds, zinc selenide (ZnSe) nanostructures (nanoparticles, nanowires, nanorods) have received much attention for the application in optoelectronic devices, such as blue laser diode, light emitting diodes, solar cells and IR optical windows. In this study, ZnSe nanostructures have been synthesized by reduction process of zinc selenate using hydrazine hydrate (N2H4.2H2O). The reductive agent of hydrazine hydrate was added to the starting materials of zinc selenate were heat treated at 500 o C for 1 hour under argon flow to form onedimensional nanostructures. The SEM and TEM images show the formation of nanocompositelike structures, which some small nanobars and nanopellets stick to the rod. The x-ray diffraction and elemental composition analysis confirm the formation of mixture zinc oxide and zinc selenide phases.
    Matched MeSH terms: Selenium Compounds
  15. Mohamed DA, Sazili AQ, Teck Chwen L, Samsudin AA
    Animals (Basel), 2020 Jun 04;10(6).
    PMID: 32512947 DOI: 10.3390/ani10060981
    Selenium (Se) is able to transform from inorganic to organic forms via many bacterial species. This feature is being considered for delivering more bioavailable selenium compounds such as selenocysteine and selenomethionine for human and animal diet. This study investigated the effects of bacterial selenoprotein versus inorganic Se on the carcass characteristics, breast meat selenium content, antioxidant status, and meat quality of broiler chickens. One hundred and eighty chicks were randomly allotted to five treatments of a basal diet supplemented with no Se, sodium selenite, Enterobactercloacae Selenium (ADS1-Se), Klebsiellapneumoniae-Selenium (ADS2-Se), and Stenotrophomonasmaltophilia-Selenium (ADS18-Se). The results showed that bacterial selenoprotein has the ability to deposit more Se in the breast meat compared to sodium selenite. Both Se sources reduced breast meat drip loss, cooking loss, shear force, and 2-thiobarbituric acid reactive substances (TBARS) significantly. It also increased total antioxidant (TAC) and glutathione peroxidase (GSH-Px) in comparison with the negative control. The highest activity of (GSH-Px), catalase (CAT), and superoxide dismutase (SOD) was found in bacterial selenoprotein. In conclusion, bacterial selenoprotein is more efficient than sodium selenite in increasing the breast meat Se deposition and oxidative capacity of broiler chickens. Therefore, it can be effectively used to produce Se-rich meat as a functional food.
    Matched MeSH terms: Selenium Compounds
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links