This study aimed to document the fish diversity and water quality at Semariang mangrove area, Kuching, Sarawak, which is located at the eastern part of Kuching Wetland National Park. Field samplings were carried out in 2009 during the construction of the flood mitigation channel at the eastern part of the park. A total of 21 families represented by 37 species of fish were caught from the area. The six dominant families in terms of the number of individuals caught were Mugilidae (16%), Leiognathidae (16%), Ambassidae (11%), Ariidae (9%), Lutjanidae (8%) and Plotosidae (6%). In terms of the percentage of six dominant genera based on the number of individuals caught, 16% was represented by Valamugil, 11% by Ambassis, 10% by Gazza, 9% by Arius, 8% by Lutjanus and 6% by Plotosus. The values of diversity and richness indices were lower at stations located close to the flood mitigation channel. Similarly, the concentrations of dissolved oxygen were lower and total suspended solids were significantly higher at stations close to the channel and sand mining area. Therefore, fish fauna and water quality at Semariang mangrove area were affected during the construction of the flood mitigation channel.
This study was conducted to study the morphological features of species under the genus Chaetoceros isolated from the coastal waters of Pahang, Malaysia. The species were isolated, cultivated and viewed under light microscope (LM) and scanning electron microscope (SEM). Four taxa were successfully isolated and cultivated in pure culture, namely Chaetoceros affinis var. affinis, Chaetoceros affinis var. willei, Chaetoceros anastomosans and Chaetoceros baculites. Both varieties of C. affinis were considered as distinct taxa where both strains can be distinguished based on morphological characteristics. C. affinis var. affinis has a thick cell wall compared with C. affinis var. willei. C. anastomosans has special features including a silica bar on the intersection of setae and the production of mucous. The length of the aperture opening is a new record from this study. The new record obtained for C. baculites includes the size of the aperture, the terminal setae, spinal arrangement, the thinness of the cell wall and the location of the species in tropical waters. Detailed data on each species will be added to the taxonomic information for future studies.
This study attempts to assess the impact of various types of land use along Sungai Langat and describes hydrological
change and water quality variation along this river. This study also determines water quality of Sungai Langat based on
low flow dry period Q100,7 using the application of QUAL2K. Dissolved oxygen (DO), pH, temperature and conductivity
were measured in situ. Biochemical oxygen demand (BOD5
), ammonia nitrogen (NH3
-N) and total suspended solid (TSS)
were analysed according to the standard methods (APHA). Water quality data was referred to National Water Quality
Standards for Malaysia (NWQS) proposed by Malaysian Department of Environment (DOE) to estimate Sungai Langat
water quality status. Four important water quality parameters namely DO, BOD5, NH3
-N and TSS were simulated with
QUAL2K version 2.07 for 83.67 km. As regard to individual parameter, DO classified this river into class III, BOD5 in
Class II, NH3
-N in Class IV and TSS in Class I. Based on QUAL2K simulation for low flow scenario, the results clearly
demonstrates a gradually reduction of DO and BOD5 whereas NH3
-N and TSS display opposite. Only NH3
-N was found
significantly increase which cause low water quality class towards the downstream. Three parameters namely DO, BOD5
and NH3
-N show effects of industrial which approximately located at the middle of river stretch. The TSS was contributed
to the river system at the upstream and downstream of the river stretch which most likely from sand mining activity which
located at Sungai Long, Cheras (near R5) and Sungai Semenyih (R11).
The present study investigated the use of modified titanium dioxide (TiO2) based photocatalytic degradation (PCD) process for the removal of some critical charged aqueous phase pollutants. First of all, the use of Nafion TiO2 (Nf-TiO2) and silica TiO2 (Si-TiO2) for the removal of aqueous phase ammonia (NH4+/NH3) species employing near UV lamp as energy source was studied. The use of Nf-TiO2 enhanced NH4+/NH3 PCD with optimum removal noted for 1 mL of Nafion solution coating per g of TiO2 and respective overall NH4+/NH3 removal was about 1.7 times higher compared to plain TiO2 at 6 h reaction time. Similarly the 0.5 mL silica solution coating per g TiO2 sample, also enhanced NH4+/NH3 removal with optimum efficiency similar to Nf-TiO2. The results from effect of ammonia concentration on to its PCD using Nf-TiO2 indicated that overall mass based NH4+/NH3 removal was higher at greater NH4+/NH3 amounts indicating high efficiency of Nf-TiO2. Similar trends were noted for Si-TiO2 as well. Furthermore, the results from modified TiO2 and mixed NH4+/NH3 and cyanide (CN-) systems indicated successful removal of co-pollutant CN- along with simultaneous degradation of NH4+/NH3 species at rates that were still higher than plain TiO2. Nevertheless application of Nf-TiO2 for the treatment of cationic dye methylene blue (MB) indicated slower MB removal compared to plain TiO2 though significant MB degradation using Nf-TiO2 could still be achieved at pH3. Additionally the results from solar radiation energized PCD process indicated positive role of solar radiation for the removal of NH4+/NH3 species under a varying set of conditions.
In this paper, with debris flow in Zhouqu as the research object, combined with experiments such as cation exchange capacity (CEC), mineral chemical composition and water quality analysis, relation between water and salt in solid source forming debris flow was studied via soil column leaching test and soluble salt analysis, and internal characteristics of debris flow was accordingly showed. It was found that, the soil was loose, and the content of gravel and sand was high, and the content of fine particle was low. The soluble contents at the slope of the accumulation body were described as, collapsed accumulation body > landslide accumulation body, slope toe > slope top, gentle slope > steep slope, also related to length of the slope. The results indicated that accumulations released a large number of base ion after intense weathering, which migrated with water, concentrated and enriched at the slope toe. Saline soil with high salt content collapsed when encountering water and then formed mudflow, thus becoming the internal power to trigger and initiate debris flow to some extent.
Levulinic acid (LA) is one of biomass derived building block chemicals with various applications. Catalytic esterification
of LA with alkyl alcohol produces levulinate ester which can be applied as fragrance, flavouring agents, as well as fuel
additives. In this study, a series of sulfated silica (SiO2
) catalyst was prepared by modification of SiO2
with sulfuric acid
(H2
SO4
) at different concentrations; 0.5 M to 5 M H2
SO4
. The catalysts were characterized, and tested for esterification
of LA with ethanol to ethyl levulinate (EL). The effect of various reaction parameters including reaction time, catalyst
loading and molar ratio of LA to ethanol on esterification of LA to EL were inspected. The catalyst with high concentration
of acid sites seemed suitable for LA esterification to EL. Among the sulfated SiO2
catalysts tested (0.5 M-SiO2
, 1 M-SiO2
,
3 M-SiO2
and 5 M-SiO2
), 3 M-SiO2
exhibited the highest performance with the optimum EL yield of 54% for reaction
conducted at reflux temperature for 4 h, 30% 3 M-SiO2
loading and LA to ethanol molar ratio of 1:20. Besides, the
reusability of 3 M-SiO2
catalyst for LA esterification with ethanol was examined for five cycles. Esterification of LA with
methanol and 1-butanol were also carried out for methyl levulinate (ML) and butyl levulinate (BL) productions with 69%
and 40% of ML and BL yields, respectively. This study demonstrates the potential of sulfated SiO2
catalyst for levulinate
ester production from LA at mild process condition.
Nanocrystalline aluminosilicate F-type zeolite (K-F, EDI-type structure) was synthesized in an organic template-free system
using rice husk ash (RHA) silica source and microwave energy. The morphology, crystallite size, chemical composition,
crystallographic and basicity properties of the nanocrystals were studied by using various characterization techniques.
The results showed that fully crystalline K-F zeolite (Si/Al ratio = 1.26) with flattened cuboid-like shaped could be
obtained within 2 min of crystallization which was considerably very fast. In addition, K-F zeolite nanocrystals was also
tested as a solid base catalyst in the microwave-enhanced Aldol condensation reaction of heptanal with benzaldehyde
and the six catalytic parameters were studied and optimized. The nanosized K-F zeolite crystals showed good catalytic
performance in the studied reaction with 77.1% heptanal conversion and 69.5% jasminaldehyde selectivity under optimum
reaction condition. The nanocatalyst was reusable and no significant loss in its catalytic reactivity was observed even
after five consecutive reaction cycles.
The reinforcing silica filler, which can be more than 40% of an elastomer composite, plays a key role to achieve the desired mechanical properties in elastomer vulcanizates. However, the highly hydrophilic nature of silica surface causes silica particle aggregation. It remained a challenge for many tire manufacturers when using silica-filled elastomer compounds. Here, the silica surface energy changes when the surface is modified with coupling or noncoupling silanes; coupling silanes can covalently bond the silica to the elastomers. The surface energy of silica was determined using inverse gas chromatography (IGC) at finite dilution (FD-IGC) and found to be reduced by up to 50% when the silica surface was silanized. The spatial distribution of silica aggregates within the tire matrix is determined by transmission electron microscopy (TEM) and a direct correlation between aggregate size (silica microdispersion) and work of cohesion from IGC is reported, highlighting surface energy and work of cohesion being excellent indicators of the degree of dispersion of silica aggregates.
In this study, an economic silica based ceramic hollow fiber (HF) microporous membrane was fabricated from guinea cornhusk ash (GCHA). A silica interlayer was coated to form a defect free silica membrane which serves as a support for the formation of thin film composite (TFC) ceramic hollow fiber (HF) membrane for the removal of microplastics (MPs) from aqueous solutions. Polyacrylonitrile (PAN), polyvinyl-chloride (PVC), polyvinylpyrrolidone (PVP) and polymethyl methacrylate (PMMA) are the selected MPs The effects of amine monomer concentration (0.5 wt% and 1 wt%) on the formation of poly (piperazine-amide) layer via interfacial polymerization over the GCHA ceramic support were also investigated. The morphology analysis of TFC GCHA HF membranes revealed the formation of a poly (piperazine-amide) layer with narrow pore arrangement. The pore size of TFC GCHA membrane declined with the formation of poly (piperazine-amide) layer, as evidenced from porosimetry analysis. The increase of amine concentration reduced the porosity and water flux of TFC GCHA HF membranes. During MPs filtration, 1 wt% (piperazine) based TFC GCHA membrane showed a lower transmission percentage of PVP (2.7%) and other suspended MPs also displayed lower transmission. The impact of humic acid and sodium alginate on MPs filtration and seawater pretreatment were also analyzed.
Limestone hills are now gaining global conservation attention as hotspots for short-range endemic species. Levels of land snail endemism can be high at limestone hills, especially at hill clusters that are geographically isolated. In the State of Perak, Peninsular Malaysia, limestone hills have been opportunistically surveyed for land snails in the past, but the majority have yet to be surveyed. To address this knowledge gap, we systematically surveyed the terrestrial malacofauna of 12 limestone hills that, based on our opinion, are a representation of the limestone land snail assemblages within the State. Our inventory yielded high sampling completeness (>85%). We found 122 species of land snails, of which 34 species were unique to one of the surveyed hills. We identified 30 species that are potentially new to science. The number of land snail species recorded at each hill ranged between 39 and 63 species. Four of the sampled limestone hills namely, Prk 01 G. Tempurung, Prk 55 G. Pondok, Prk 47 Kanthan, and Prk 64 Bt Kepala Gajah, have high levels of species richness and unique species, representing 91% of the total species recorded in this study. We identified two clusters of limestone hills in central Perak with distinct differences in land snail species composition - a northern hill cluster on elevated granite bedrock and southern hill cluster in a low-lying valley surrounded by alluvial soils. As limestone hills continue to be quarried to meet the cement demand, the four identified limestone hills, along with other hills from the two clusters, warrant urgent conservation attention in order to maintain high species diversity within Perak's terrestrial malacofauna.
The aim of the work reported in this article was to investigate the effects of medium temperature and industrial by-products on the key hardened properties of high performance concrete. Four concrete mixes were prepared based on a water-to-binder ratio of 0.35. Two industrial by-products, silica fume and Class F fly ash, were used separately and together with normal portland cement to produce three concrete mixes in addition to the control mix. The properties of both fresh and hardened concretes were examined in the laboratory. The freshly mixed concrete mixes were tested for slump, slump flow, and V-funnel flow. The hardened concretes were tested for compressive strength and dynamic modulus of elasticity after exposing to 20, 35 and 50 °C. In addition, the initial surface absorption and the rate of moisture movement into the concretes were determined at 20 °C. The performance of the concretes in the fresh state was excellent due to their superior deformability and good segregation resistance. In their hardened state, the highest levels of compressive strength and dynamic modulus of elasticity were produced by silica fume concrete. In addition, silica fume concrete showed the lowest level of initial surface absorption and the lowest rate of moisture movement into the interior of concrete. In comparison, the compressive strength, dynamic modulus of elasticity, initial surface absorption, and moisture movement rate of silica fume-fly ash concrete were close to those of silica fume concrete. Moreover, all concretes provided relatively low compressive strength and dynamic modulus of elasticity when they were exposed to 50 °C. However, the effect of increased temperature was less detrimental for silica fume and silica fume-fly ash concretes in comparison with the control concrete.
Halloysite (HNT) is treated with sulfuric acid and the physico-chemical properties of its morphology, surface activity, physical and chemical properties have been investigated when HNT is exposed to sulfuric acid with treatment periods of 1 h (H1), 3 h (H3), 8 h (H8), and 21 h (H21). The significance of this and similar work lies in the importance of using HNT as a functional material in nanocomposites. The chemical structure was characterized by Fourier transform infrared spectroscopy (FTIR). The spectrum demonstrates that the hydroxyl groups were active for grafting modification using sulfuric acid, promoting a promising potential use for halloysite in ceramic applications as filler for novel clay-polymer nanocomposites. From the X-ray diffraction (XRD) spectrum, it can be seen that the sulfuric acid breaks down the HNT crystal structure and alters it into amorphous silica. In addition, the FESEM images reveal that the sulfuric acid treatment dissolves the AlO₆ octahedral layers and induces the disintegration of SiO₄ tetrahedral layers, resulting in porous nanorods. The Bruncher-Emmett-Teller (BET) surface area and total pore volume of HNTs showed an increase. The reaction of the acid with both the outer and inner surfaces of the nanotubes causes the AlO₆ octahedral layers to dissolve, which leads to the breakdown and collapse of the tetrahedral layers of SiO₄. The multi-fold results presented in this paper serve as a guide for further HNT functional treatment for producing new and advanced nanocomposites.
Pretomanid and MCC7433, a novel nitroimidazopyrazinone analog, are promising antitubercular agents that belong to the bicyclic nitroimidazole family. Despite possessing high cell permeability, they suffer from poor aqueous solubility and require specialized formulations in order to be orally bioavailable. To address this limitation, we investigated the use of mesoporous silica nanoparticles (MCM-41) as drug carriers. MCM-41 nanoparticles were synthesized using a sol-gel method, and their surface was further modified with amine and phosphonate groups. A simple rotary evaporation method was used to incorporate the compounds of interest into the nanoparticles, leading to a high encapsulation efficiency of ≥86% with ∼10% loading (w/w). An overall significant improvement of solubility was also observed, and the pharmacological activity of pretomanid and MCC7433 was fully retained when tested in vitro against Mycobacterium tuberculosis using these nanocarriers. Amino-functionalized MCM-41 nanoparticles were found to enhance the systemic exposure of MCC7433 in mice (1.3-fold higher Cmax) compared to MCC7433 alone. The current work highlights the potential of using nanoparticles such as mesoporous silica as a carrier for oral delivery of poorly soluble antibacterial agents against tuberculosis.
Herein, the polymer nanomatrix of chitosan/SiO2 (CHI/n-SiO2) was enriched with a π-π electron donor-acceptor system using diaromatic rings of benzil (BEZ) assisted via a hydrothermal process to obtain an effective adsorbent of chitosan-benzil/SiO2 (CHI-BEZ/n-SiO2). The polymer nanomatrix (CHI/n-SiO2) and the resulting adsorbent (CHI-BEZ/n-SiO2) were applied to remove the anionic acid red 88 (AR88) dye from aqueous media in a comparative mode. Box-Behnken design (BBD) was adopted to optimize AR88 adsorption onto CHI/n-SiO2 and CHI-BEZ/n-SiO2 with respect to variables that influence AR88 adsorption (adsorbent dose: 0.02-0.1 g/100 mL; pH: 4-10; and time: 10-90). The adsorption studies at equilibrium were conducted with a variety of initial AR88 dye concentrations (20-200 mg/L). The adsorption isotherm results reveal that the AR88 adsorption by CHI/n-SiO2 and CHI-BEZ/n-SiO2 are described by the Langmuir model. The kinetic adsorption profiles of AR88 with CHI/n-SiO2 and CHI-BEZ/n-SiO2 reveal that the pseudo-first-order model provides the best fit results. Interestingly, CHI-BEZ/n-SiO2 has a high adsorption capacity (261.2 mg/g), which exceeds the adsorption capacity of CHI/n-SiO2 (215.1 mg/g) that relates to the surface effects of SiO2 and the functionalization of chitosan with BEZ. These findings show that CHI-BEZ/n-SiO2 represents a highly efficient adsorbent for the removal of harmful pollutants from water, which outperforming the CHI/n-SiO2 system.
This study evaluated the use of urethane dimethacrylate (UDMA) as a base monomer to prepare the newly developed flowable composite (FC) using nanohybrid silica derived from rice husk in comparison to bisphenol A-glycidyl methacrylate (Bis-GMA) on the degree of conversion and physicomechanical properties. The different loadings of base monomer to diluent monomer were used at the ratio of 40:60, 50:50, and 60:40. The bonding analysis confirmed the presence of nanohybrid silica in the newly developed FC. Independent t-test revealed a statistically significant increase in the degree of conversion, depth of cure and Vickers hardness of the UDMA-based FC, while surface roughness showed comparable results between the two base monomers. In conclusion, UDMA-based FC demonstrated superior performance with 60%-65% conversions, a significantly higher depth of cure exceeding 1 mm which complies with the Internal Standard of Organization 4049 (ISO 4049), and a substantial increase in Vickers hardness numbers compared to Bis-GMA-based FC, making UDMA a suitable alternative to Bis-GMA as a base monomer in the formulation of this newly developed FC derived from rice husk.
Every structure might be exposed to fire at some point in its lifecycle. The ability of geopolymer composites to withstand the effects of fire damage early before it is put out is of great importance. This study examined the effects of fire on geopolymer composite samples made with high-calcium fly ash and alkaline solution synthesised from waste banana peduncle and silica fume. A ratio of 0.30, 0.35, and 0.4 was used in the study for the alkaline solution to fly ash. Also used were ratios of 0.5, 0.75, and 1 for silica oxide (silica fume) to potassium hydroxide ratio. The strength loss, residual compressive strength, percentage strength loss, relative residual compressive strength, ultrasonic pulse velocity, and microstructural properties of the thirteen mortar mixes were measured after exposure to temperatures of 200, 400, 600, and 800 °C for 1 h, respectively. The results reveal that geopolymer samples exposed to elevated temperatures showed great dimensional stability with no visible surface cracks. There was a colour transition from dark grey to whitish brown for the green geopolymer mortar and brown to whitish brown for the control sample. As the temperature rose, weight loss became more pronounced, with 800 °C producing the most significant weight reduction. The optimum mixes had a residual compressive strength of 25.02 MPa after being exposed to 200 °C, 18.72 MPa after being exposed to 400 °C, 14.04 MPa after being exposed to 600 °C, and 7.41 MPa after being exposed to 800 °C. The control had a residual compressive strength of 8.45 MPa after being exposed to 200 °C, 6.67 MPa after being exposed to 400 °C, 3.16 MPa after being exposed to 600 °C, and 2.23 MPa after being exposed to 800 °C. The relative residual compressive strength decreases for green geopolymer mortar are most significant at 600 and 800 °C, with an average decrease of 0.47 and 0.30, respectively. The microstructure of the samples revealed various phase changes and new product formations as the temperature increased.
The aim of this paper was to synthesise core-shell nanostructures comprised of mesoporous silica core and a low melting-point polyethylene glycol (PEG) nanoshell with a sharp gel-liquid phase transition for rapid drug release at hyperthermia temperature range.
A new photonics biosensor configuration comprising a Double-side Ring Add-drop Filter microring resonator (DR-ADF) made from SiO2-TiO2 material is proposed for the detection of Salmonella bacteria (SB) in blood. The scattering matrix method using inductive calculation is used to determine the output signal's intensities in the blood with and without presence of Salmonella. The change in refractive index due to the reaction of Salmonella bacteria with its applied antibody on the flagellin layer loaded on the sensing and detecting microresonator causes the increase in through and dropper port's intensities of the output signal which leads to the detection of SB in blood. A shift in the output signal wavelength is observed with resolution of 0.01 nm. The change in intensity and shift in wavelength is analyzed with respect to the change in the refractive index which contributes toward achieving an ultra-high sensitivity of 95,500 nm/RIU which is almost two orders higher than that of reported from single ring sensors and the limit of detection is in the order of 1 × 10(-8) RIU. In applications, such a system can be employed for a high sensitive and fast detection of bacteria.
Thermal characteristics of turbulent nanofluid flow in a rectangular pipe have been investigated numerically. The continuity, momentum, and energy equations were solved by means of a finite volume method (FVM). The symmetrical rectangular channel is heated at the top and bottom at a constant heat flux while the sides walls are insulated. Four different types of nanoparticles Al2O3, ZnO, CuO, and SiO2 at different volume fractions of nanofluids in the range of 1% to 5% are considered in the present investigation. In this paper, effect of different Reynolds numbers in the range of 5000 < Re < 25000 on heat transfer characteristics of nanofluids flowing through the channel is investigated. The numerical results indicate that SiO2-water has the highest Nusselt number compared to other nanofluids while it has the lowest heat transfer coefficient due to low thermal conductivity. The Nusselt number increases with the increase of the Reynolds number and the volume fraction of nanoparticles. The results of simulation show a good agreement with the existing experimental correlations.
A new microring resonator system is proposed for the detection of the Salmonella bacterium in drinking water, which is made up of SiO2-TiO2 waveguide embedded inside thin film layer of the flagellin. The change in refractive index due to the binding of the Salmonella bacterium with flagellin layer causes a shift in the output signal wavelength and the variation in through and drop port's intensities, which leads to the detection of Salmonella bacterium in drinking water. The sensitivity of proposed sensor for detecting of Salmonella bacterium in water solution is 149 nm/RIU and the limit of detection is 7 × 10(-4)RIU.