Displaying publications 201 - 220 of 1133 in total

Abstract:
Sort:
  1. Fulltext Characterization of structural stability of palm oil esters-based nanocosmeceuticals loaded with tocotrienol
    Ng SH, Woi PM, Basri M, Ismail Z
    J Nanobiotechnology, 2013;11:27.
    PMID: 24059593 DOI: 10.1186/1477-3155-11-27
    Palm oil esters (POEs) are esters derived from palm oil and oleyl alcohol have great potential in the cosmetic and pharmaceutical industries due to the excellent wetting behavior of the esters without the oily feel. The role of oil-in-water nanoemulsions loaded with tocotrienol sedimentation behavior was studied. LUMiFuge® 116 particle separation analyzer was used to investigate the sedimentation behavior of POEs/tocotrienol/xanthan gum nanoemulsion system during centrifugation. Analyzing the sedimentation kinetics of dispersions in a centrifugal field also yields information about the rheological behavior and structural stability.
    Matched MeSH terms: Plant Oils/chemistry*
  2. Fulltext Preparation and characterization of poly(ethyl hydrazide)-grafted oil palm empty fruit bunch fibre for the removal of Cu(II) ions from an aqueous environment
    Johari IS, Yusof NA, Haron MJ, Nor SM
    Molecules, 2013 Jul 18;18(7):8461-72.
    PMID: 23873385 DOI: 10.3390/molecules18078461
    Poly(ethyl hydrazide)-grafted oil palm empty fruit bunch fibre (peh-g-opefb) was successfully prepared by heating poly(methyl acrylate)-grafted opefb (pma-g-opefb) at 60 °C for 4 h with a solution of hydrazine hydrate (15% v/v) in ethanol. The Fourier transform infrared spectrum of the product shows a secondary amine peak at 3267 cm⁻¹, with amide carbonyl peaks at 1729 cm⁻¹ and 1643 cm⁻¹. The chelating ability of peh-g-opefb was tested with copper ion in aqueous solution. A batch adsorption study revealed that maximum adsorption of copper ion was achieved at pH 5. An isotherm study showed the adsorption follows a Langmuir model, with a maximum adsorption capacity of 43.48 mg g-1 at 25 °C. A kinetic study showed that the adsorption of copper ion rapidly reaches equilibrium and follows a pseudo-second-order kinetic model, with a constant rate of 7.02 × 10⁻⁴ g mg⁻¹ min⁻¹ at 25 °C. The Gibbs free energy, ∆G⁰, value is negative, indicating a spontaneous sorption process. Entropy, ∆S⁰, gives a positive value, indicating that the system is becoming increasingly disordered after the adsorption of copper ion. A positive enthalpy value, ∆H⁰, shows that the endothermic process takes place during the adsorption and is more favourable at high temperatures.
    Matched MeSH terms: Plant Oils/chemistry
  3. Chemical compositions of the rhizome, leaf and stem oils from Malaysian Hornstedtia leonurus
    Jani NA, Sirat MH, Ali NM, Aziz A
    Nat Prod Commun, 2013 Apr;8(4):513-4.
    PMID: 23738467
    The chemical compositions of the essential oil of the rhizome, leaf and stem of Hornstedtia leonurus Retz., collected from Negeri Sembilan, Malaysia,are reported for the first time. The essential oils were extracted using hydrodistillation and analyzed by gas chromatography (GC-FID) and gas chromatography/mass spectrometry (GC/MS). Seventeen (96.4%), thirteen (89.2%) and nine components (98.8%) were successfully identified from the rhizome, stem and leaf oils, respectively. Phenylpropanoids were found to be the major fraction, with methyleugenol being the most abundant compound in all oils with percentage compositions of 76.4% (rhizome), 80.3% (stem) and 74.5% (leaf).
    Matched MeSH terms: Oils, Volatile/analysis*
  4. Influence of palm oil mill effluent as inoculum on anaerobic digestion of cattle manure for biogas production
    Saidu M, Yuzir A, Salim MR, Salmiati, Azman S, Abdullah N
    Bioresour Technol, 2013 Aug;141:174-6.
    PMID: 23588120 DOI: 10.1016/j.biortech.2013.03.111
    Anaerobic digestion for palm oil mill effluent (POME) is widely known for its potential in biogass production. In this study, the potential of using cattle manure for biogas production in complete mix anaerobic bioreactor was investigated using POME at unregulated pH and temperature. Two identical bioreactors were used in this study; namely R1 and R2 fed with cattle manure without and with POME as inoculum, respectively. Both bioreactors were allowed for five days to run in batch mode followed by semi continuous operations at HRT of 20 days. R2 produced 41% methane content compared to 18% produced in R1. A better COD percentage reduction of 45% was found in R2 which was operated with POME as inoculum compared to R1 with 35%. These results indicated that POME as inoculum has an influence on the start-up time and the rate of biogas produced.This findings will help in waste reduction.
    Matched MeSH terms: Plant Oils*
  5. The effects of physical refining on the formation of 3-monochloropropane-1,2-diol esters in relation to palm oil minor components
    Zulkurnain M, Lai OM, Latip RA, Nehdi IA, Ling TC, Tan CP
    Food Chem, 2012 Nov 15;135(2):799-805.
    PMID: 22868161 DOI: 10.1016/j.foodchem.2012.04.144
    The formation of 3-monochloropropane-1,2-diol (3-MCPD) esters in refined palm oil during deodorisation is attributed to the intrinsic composition of crude palm oil. Utilising D-optimal design, the effects of the degumming and bleaching processes on the reduction in 3-MCPD ester formation in refined palm oil from poor-quality crude palm oil were studied relative to the palm oil minor components that are likely to be their precursors. Water degumming remarkably reduced 3-MCPD ester formation by up to 84%, from 9.79 mg/kg to 1.55 mg/kg. Bleaching with synthetic magnesium silicate caused a further 10% reduction, to 0.487 mg/kg. The reduction in 3-MCPD ester formation could be due to the removal of related precursors prior to the deodorisation step. The phosphorus content of bleached palm oil showed a significant correlation with 3-MCPD ester formation.
    Matched MeSH terms: Plant Oils/chemistry*
  6. Investigation of the possibility of using waste cooking oil as a rejuvenating agent for aged bitumen
    Zargar M, Ahmadinia E, Asli H, Karim MR
    J Hazard Mater, 2012 Sep 30;233-234:254-8.
    PMID: 22818590 DOI: 10.1016/j.jhazmat.2012.06.021
    The ageing of the bitumen during storage, mixing, transport and laying on the road, as well as in service life, are the most important problems presented by the use of bitumen in pavements. This paper investigates the possibility of using waste cooking oil (WCO), which is a waste material that pollutes landfills and rivers, as an alternative natural rejuvenating agent for aged bitumen to a condition that resembles the original bitumen. With this target, the physical and chemical properties of the original bitumen, aged bitumen and rejuvenated bitumen were measured and compared by the bitumen binder tests - softening point, penetration, Brookfield viscosity, dynamic shear rheometer and Fourier transform infrared spectroscopy. In addition, the behaviour of the WCO rejuvenated bitumen is investigated and compared with virgin bitumen after using the rolling thin film oven ageing process. In general, the results showed that using 3-4% of WCO the aged bitumen group 40/50 was rejuvenated to a condition that closely resembled the physical, rheological properties of the original bitumen (80/100), however, there was a difference in the tendency to ageing between the WCO rejuvenated bitumen and the virgin bitumen during mixing, transport and laying on the road.
    Matched MeSH terms: Oils*
  7. Fulltext Dietary methionine and n-6/n-3 polyunsaturated fatty acid ratio reduce adverse effects of infectious bursal disease in broilers
    Maroufyan E, Kasim A, Ebrahimi M, Loh TC, Hair-Bejo M, Soleimani AF
    Poult Sci, 2012 Sep;91(9):2173-82.
    PMID: 22912451 DOI: 10.3382/ps.2012-02317
    This study was carried out to investigate the modulatory effects of dietary methionine and n-6/n-3 polyunsaturated fatty acids (PUFA) ratio on immune response and performance of infectious bursal disease (IBD)-challenged broiler chickens. In total, 350 one-day-old male broiler chicks were assigned to 1 of the 6 dietary treatment groups in a 3 × 2 factorial arrangement. There were 3 n-6/n-3 PUFA ratios (45, 5.5, and 1.5) and 2 levels of methionine (NRC recommendation and twice NRC recommendation). The results showed that birds fed with dietary n-6/n-3 PUFA ratio of 5.5 had higher BW, lower feed intake, and superior FCR than other groups. However, the highest antibody response was observed in birds with dietary n-6/n-3 PUFA ratio of 1.5. Lowering n-6/n-3 PUFA ratio reduced bursa lesion score equally in birds fed with n-6/n-3 PUFA ratio of 5.5 and 1.5. Supplementation of methionine by twice the recommendation also improved FCR and reduced feed intake and bursa lesion score. However, in this study, the optimum performance (as measured by BW, feed intake, and FCR) did not coincide with the optimum immune response (as measured by antibody titer). It seems that dietary n-3 PUFA modulates the broiler chicken performance and immune response in a dose-dependent but nonlinear manner. Therefore, it can be suggested that a balance of moderate level of dietary n-6/n-3 PUFA ratio (5.5) and methionine level (twice recommendation) might enhance immune response together with performance in IBD-challenged broiler chickens.
    Matched MeSH terms: Fish Oils/administration & dosage; Fish Oils/pharmacology; Fish Oils/chemistry; Plant Oils/administration & dosage; Plant Oils/pharmacology; Plant Oils/chemistry
  8. Fulltext Stability analysis of oil yield in oil palm (Elaeis guineensis) progenies in different environments
    Rafii MY, Jalani BS, Rajanaidu N, Kushairi A, Puteh A, Latif MA
    Genet. Mol. Res., 2012;11(4):3629-41.
    PMID: 23096688 DOI: 10.4238/2012.October.4.10
    We evaluated 38 dura x pisifera (DP) oil palm progenies in four locations in Malaysia for genotype by environment interaction and genotypic stability studies. The DP progenies derived from crosses between pisifera palms of AVROS, Serdang S27B, Serdang 29/36, and Lever Cameroon were chosen to be the males' parent and Deli dura palms designated as females' parent. All the locations differed in terms of soil physical and chemical properties, and the soil types ranged from coastal clay to inland soils. The genotype by environment interaction and stability of the individual genotypes were analyzed for oil yield trait using several stability techniques. A genotype by environment interaction was detected for oil yield and it had a larger variance component than genotypic variance (σ(2)(gl)/σ(2)(g) = 139.7%). Genotype by environment interaction of oil yield was largely explained by a non-linear relationship between genotypic and environmental values. Overall assessment of individual genotypic stability showed that seven genotypes were highly stable and had consistent performance over the environments for the oil yield trait [total individual genotype stability scored more than 10 and mean oil yielded above the average of the environment (genotype means are more than 34.37 kg·palm(-1)·year(-1))]. These genotypes will be useful for oil palm breeding and tissue culture programs for developing high oil yielding planting materials with stable performance.
    Matched MeSH terms: Plant Oils/chemistry*
  9. Fulltext Optimization of supercritical CO(2) extraction of fish oil from viscera of African Catfish (Clarias gariepinus)
    Sarker MZ, Selamat J, Habib AS, Ferdosh S, Akanda MJ, Jaffri JM
    Int J Mol Sci, 2012;13(9):11312-22.
    PMID: 23109854 DOI: 10.3390/ijms130911312
    Fish oil was extracted from the viscera of African Catfish using supercritical carbon dioxide (SC-CO(2)). A Central Composite Design of Response Surface methodology (RSM) was employed to optimize the SC-CO(2) extraction parameters. The oil yield (Y) as response variable was executed against the four independent variables, namely pressure, temperature, flow rate and soaking time. The oil yield varied with the linear, quadratic and interaction of pressure, temperature, flow rate and soaking time. Optimum points were observed within the variables of temperature from 35 °C to 80 °C, pressure from 10 MPa to 40 MPa, flow rate from 1 mL/min to 3 mL/min and soaking time from 1 h to 4 h. However, the extraction parameters were found to be optimized at temperature 57.5 °C, pressure 40 MPa, flow rate 2.0 mL/min and soaking time 2.5 h. At this optimized condition, the highest oil yields were found to be 67.0% (g oil/100 g sample on dry basis) in the viscera of catfish which was reasonable to the yields of 78.0% extracted using the Soxhlet method.
    Matched MeSH terms: Fish Oils/chemistry*
  10. Quantitative and physical evaluation of patchouli essential oils obtained from different sources of Pogostemon cablin
    Hussin N, Mondello L, Costa R, Dugo P, Yusoff NI, Yarmo MA, et al.
    Nat Prod Commun, 2012 Jul;7(7):927-30.
    PMID: 22908584
    Patchouli essential oil can be obtained from fresh, dried and fermented plant material. It is a highly valuable product in the fragrance industry and its quality changes depending upon raw material age and oil storage. In this work, patchouli essential oils derived from different treatments have been subjected to GC-FID quantitative analysis using an internal standard (ISTD) method with response factors (RF). Samples were obtained from i) fresh plants; ii) hydrodistillation of one year mature and fermented plants; iii) hydrodistillation of one year mature plants; iv) commercial products from Indonesia and Malaysia. Linear Retention Indices (LRI) for both polar and non-polar GC-MS analyses were also measured as a tool for qualitative analysis towards a homologous series of C7-C30 n-alkanes. The results obtained confirmed that, in all samples, patchouli alcohol was the main volatile constituent, with higher amount in lab-scale produced oils, compared with commercial samples. Other major compounds, in lab oils and commercial samples respectively, were: delta-guaiene, alpha-guaiene, pogostol, seychellene and alpha-patchoulene. Another 36 compounds were also found.
    Matched MeSH terms: Oils, Volatile/analysis*
  11. Study of surface activity of piroxicam at the interface of palm oil esters and various aqueous phases
    Abdulkarim MF, Abdullah GZ, Chitneni M, Yam MF, Mahdi ES, Salman IM, et al.
    Pak J Pharm Sci, 2012 Apr;25(2):429-33.
    PMID: 22459473
    The surface activity of some non-steroidal anti-inflammatory agents like ibuprofen was investigated extensively. This fact has attracted the researchers to extend this behavior to other agents like piroxicam. Piroxicam molecules are expected to orient at the interface of oil and aqueous phase. The aim of this study was, firstly, to assess the surface and interfacial tension behaviour of newly synthesised palm oil esters and various pH phosphate buffers. Furthermore, the surface and interfacial tension activity of piroxicam was studied. All the measurements of surface and interfacial tension were made using the tensiometer. The study revealed that piroxicam has no effect on surface tension values of all pH phosphate buffers and palm oil esters. Similarly, various concentrations of piroxicam did not affect the interfacial tensions between the oil phase and the buffer phases. Accordingly, the interfacial tension values of all mixtures of oil and phosphate buffers were considerably high which indicates the immiscibility. It could be concluded that piroxicam has no surface activity. Additionally, there is no surface pressure activity of piroxicam at the interface of plam oil esters and phosphate buffers in the presence of Tweens and Spans.
    Matched MeSH terms: Plant Oils/chemistry
  12. Extraction of phenanthrene and fluoranthene from contaminated sand using palm kernel and soybean oils
    Von Lau E, Gan S, Ng HK
    J Environ Manage, 2012 Sep 30;107:124-30.
    PMID: 22595079 DOI: 10.1016/j.jenvman.2012.04.029
    Experimental extraction tests are conducted to investigate feasibility of saturated palm kernel oil (PKO) and unsaturated soybean oil (SO) to extract polycyclic aromatic hydrocarbons (PAHs) from contaminated sand. The extraction rates and efficiencies for lowly contaminated (LC) and highly contaminated (HC) sands at temperatures of 30 °C and 70 °C are evaluated using empirical first order kinetic dissolution models. In LC sand, the extraction is dominated by the diffusion of PAHs adsorbed onto particle surfaces and the direct dissolution of PAH phase. In HC sand, a rapid diffusion of PAHs adsorbed onto particle surfaces and a direct dissolution of PAH phase occur followed by a slower diffusion of PAHs entrapped within the pores and micropores. Larger diffusion resistance during HC sand extractions results in an average 10.8% reduction in extraction efficiencies compared to LC sand. Increased temperature generally increases the mass transfer rates and extraction efficiencies. Additionally, the physicochemical properties of both oils and PAHs also determine the extent of PAH extraction into oil.
    Matched MeSH terms: Plant Oils/chemistry*
  13. Development, characterization and commercial application of palm based dihydroxystearic acid and its derivatives: an overview
    Koay GF, Chuah TG, Zainal-Abidin S, Ahmad S, Choong TS
    J Oleo Sci, 2011;60(5):237-65.
    PMID: 21502724
    Hydroxyl fatty acids and their derivatives are of high value due to their wide range of industrial application, including cosmetic, food, personal care and pharmaceutical products. Realizing the importance of hydroxyl fatty acids, and yet due to the absence of the conventional starting raw materials, Malaysia has developed 9,10-dihydroxystearic acid (9,10-DHSA) and its derivatives from locally abundant palm based oils. The aim of this article is to provide a general description of the works that have thus far being done on palm based 9,10-DHSA: starting from its conception and production from commercial grade palm based crude oleic acid via epoxidation and hydrolysis, purification through solvent crystallization and characterization through wet and analytical chemistry, moving on to developmental works done on producing its derivatives through blending, esterification, amidation and polymerization, and completing with applications of 9,10-DHSA and its derivatives, e.g. DHSA-stearates and DHSA-estolides, in commercial products such as soaps, deodorant sticks and shampoos. This article incorporates some of the patent filed technological knowhow on 9,10-DHSA and its derivatives, and will also point out some of the shortcomings in previously published documents and provide some recommendations for future research works in mitigating these shortcomings.
    Matched MeSH terms: Plant Oils/chemistry*
  14. Utilization of palm empty fruit bunch for the production of biodiesel from Jatropha curcas oil
    Yaakob Z, Sukarman IS, Narayanan B, Abdullah SR, Ismail M
    Bioresour Technol, 2012 Jan;104:695-700.
    PMID: 22113069 DOI: 10.1016/j.biortech.2011.10.058
    Transesterification reaction of Jatropha curcas oil with methanol was carried out in the presence of ash generated from Palm empty fruit bunch (EFB) in a heterogeneous catalyzed process. The ash was doped with KOH by impregnation to achieve a potassium level of 20 wt.%. Under optimum conditions for the EFB-catalyzed (65 °C, oil/methanol ratio of 15, 90 min, 20 wt.% EFB ash catalyst) and the KOH-EFB-catalyzed reactions (65 °C, oil/methanol ratio of 15, 45 min, 15 wt.% of KOH doped EFB ash), biodiesel (>98%) with specifications higher than those stipulated by European biodiesel quality standard EN 14214 was obtained.
    Matched MeSH terms: Plant Oils/chemistry*
  15. Preparation and characterization of activated carbon from sunflower seed oil residue via microwave assisted K2CO3 activation
    Foo KY, Hameed BH
    Bioresour Technol, 2011 Oct;102(20):9794-9.
    PMID: 21875789 DOI: 10.1016/j.biortech.2011.08.007
    Sunflower seed oil residue, a by-product of sunflower seed oil refining, was utilized as a feedstock for preparation of activated carbon (SSHAC) via microwave induced K(2)CO(3) chemical activation. SSHAC was characterized by Fourier transform infrared spectroscopy, nitrogen adsorption-desorption and elemental analysis. Surface acidity/basicity was examined with acid-base titration, while the adsorptive properties of SSHAC were quantified using methylene blue (MB) and acid blue 15 (AB). The monolayer adsorption capacities of MB and AB were 473.44 and 430.37 mg/g, while the Brunauer-Emmett-Teller surface area, Langmuir surface area and total pore volume were 1411.55 m(2)/g, 2137.72 m(2)/g and 0.836 cm(3)/g, respectively. The findings revealed the potential to prepare high surface area activated carbon from sunflower seed oil residue by microwave irradiation.
    Matched MeSH terms: Plant Oils/chemistry*
  16. Fulltext In vitro total phenolics, flavonoids contents and antioxidant activity of essential oil, various organic extracts from the leaves of tropical medicinal plant Tetrastigma from Sabah
    Hossain MA, Shah MD, Gnanaraj C, Iqbal M
    Asian Pac J Trop Med, 2011 Sep;4(9):717-21.
    PMID: 21967695 DOI: 10.1016/S1995-7645(11)60180-6
    OBJECTIVE: To detect the in vitro total phenolics, flavonoids contents and antioxidant activity of essential oil, various organic extracts from the leaves of tropical medicinal plant Tetrastigma from Sabah.

    METHODS: The dry powder leaves of Tetrastigma were extracted with different organic solvent such as hexane, ethyl acetate, chloroform, butanol and aqueous methanol. The total phenolic and total flavonoids contents of the essential oil and various organic extracts such as hexane, ethyl acetate, chloroform, butanol and aqueous ethanol were determined by Folin - Ciocalteu method and the assayed antioxidant activity was determined in vitro models such as antioxidant capacity by radical scavenging activity using α, α-diphenyl- β-picrylhydrazyl (DPPH) method.

    RESULTS: The total phenolic contents of the essential oil and different extracts as gallic acid equivalents were found to be highest in methanol extract (386.22 mg/g) followed by ethyl acetate (190.89 mg/g), chloroform (175.89 mg/g), hexane (173.44 mg/g), and butanol extract (131.72 mg/g) and the phenolic contents not detected in essential oil. The antioxidant capacity of the essential oil and different extracts as ascorbic acid standard was in the order of methanol extract > ethyl acetate extract >chloroform> butanol > hexane extract also the antioxidant activity was not detected in essential oil.

    CONCLUSIONS: The findings show that the extent of antioxidant activity of the essential oil and all extracts are in accordance with the amount of phenolics present in that extract. Leaves of Tetrastigma being rich in phenolics may provide a good source of antioxidant.

    Matched MeSH terms: Oils, Volatile/analysis*
  17. Synthesis of methyl esters from palm (Elaeis guineensis) oil using cobalt doped MgO as solid oxide catalyst
    Rahman NA, Olutoye MA, Hameed BH
    Bioresour Technol, 2011 Oct;102(20):9749-54.
    PMID: 21855332 DOI: 10.1016/j.biortech.2011.07.023
    The potential of Mg(x)Co(2-)(x)O(2) as heterogeneous reusable catalyst in transesterification of palm oil to methyl ester was investigated. The catalyst was prepared via co-precipitation of the metal hydroxides at different Mg-Co ratios. Mg(1.7)Co(0.3)O(2) catalyst was more active than Mg(0.3)Co(1.7)O(2) in the transesterification of palm oil with methanol. The catalysts calcined at temperature 300 °C for 4 h resulted in highly active oxides and the highest transesterification of 90% was achieved at methanol/oil molar ratio of 9:1, catalyst loading of 5.00 wt.%, reaction temperature of 150 °C and reaction time of 2 h. The catalyst could easily be removed from reaction mixture, but showed 50% decrease in activity when reused due to leaching of active sites.
    Matched MeSH terms: Plant Oils/chemistry*
  18. Ethanesulfonic acid-based esterification of industrial acidic crude palm oil for biodiesel production
    Hayyan A, Mjalli FS, Hashim MA, Hayyan M, AlNashef IM, Al-Zahrani SM, et al.
    Bioresour Technol, 2011 Oct;102(20):9564-70.
    PMID: 21855329 DOI: 10.1016/j.biortech.2011.07.074
    An industrial grade acidic crude palm oil (ACPO) pre-treatment process was carried out using ethanesulfonic acid (ESA) as a catalyst in the esterification reaction. ESA was used in different dosages to reduce free fatty acid (FFA) to a minimum level for the second stage of biodiesel production via alkaline transesterification reaction. Different process operating conditions were optimized such as ESA dosage (0.25-3.5% wt/wt), methanol to ACPO molar ratio (1:1-20:1), reaction temperature (40-70 °C), and reaction time (3-150 min). This study revealed the potential use of abundant quantities of ACPO from oil palm mills for biodiesel production. The lab scale results showed the effectiveness of the pre-treatment process using ESA catalyst. Three consecutive catalyst recycling runs were achieved without significant degradation in its performance. Second and third reuse runs needed more reaction time to achieve the target level of FFA content. Esterification and transesterification using ESA and KOH respectively is proposed for biodiesel industrial scale production. The produced biodiesel meets the international standards specifications for biodiesel fuel (EN 14214 and ASTM D6751).
    Matched MeSH terms: Plant Oils/chemistry*
  19. The evaluation of various kinetic models for base-catalyzed ethanolysis of palm oil
    Shahla S, Ngoh GC, Yusoff R
    Bioresour Technol, 2012 Jan;104:1-5.
    PMID: 22154586 DOI: 10.1016/j.biortech.2011.11.010
    In this paper, the kinetics of palm oil ethanolysis with various models have been investigated in a temperature range of 25-55 °C. The highest yield was achieved when the conversion to ethyl ester was 97.5±0.5% in the stated temperature range, using ethanol:oil molar ratio of 12:1, and 1.0 wt.% sodium ethoxide. The level of conformity of the reaction with reversible second order, irreversible second order and first order kinetic models were evaluated by means of the R(2) values of the linear curves. The ethanolysis showed the best conformity with irreversible second order kinetic model with 92-98% level of confidence. The reaction rate constants were within 0.018-0.088 dm(3)/mol min and the activation energy of the reaction was 42.36 kJ/mol.
    Matched MeSH terms: Plant Oils/chemistry*
  20. Role of calcium oxide in sludge granulation and methanogenesis for the treatment of palm oil mill effluent using UASB reactor
    Ahmad A, Ghufran R, Abd Wahid Z
    J Hazard Mater, 2011 Dec 30;198:40-8.
    PMID: 22047724 DOI: 10.1016/j.jhazmat.2011.10.008
    The granulation process in palm oil mill effluent using calcium oxide-cement kiln dust (CaO-CKD) provides an attractive and cost effective treatment option. In this study the efficiency of CaO-CKD at doses of 1.5-20 g/l was tested in batch experiments and found that 10 g of CaO/l caused the greatest degradation of VFA, butyrate and acetate. An upflow anaerobic sludge blanket (UASB) reactor was operated continuously at 35°C for 150 days to investigate the effect of CaO-CKD on sludge granulation and methanogenesis during start-up. The treatment of POME emphasized the influence of varying organic loading rates (OLR). Up to 94.9% of COD was removed when the reactor was fed with the 15.5-65.5 g-CODg/l at an OLR of 4.5-12.5 kg-COD/m(3)d, suggesting the feasibility of using CaO in an UASB process to treat POME. The ratio of volatile solids/total solids (VS/TS) and volatile fatty acids in the anaerobic sludge in the UASB reactor decreased significantly after long-term operation due to the precipitation of calcium carbonate in the granules. Granulation and methanogenesis decreased with an increase in the influent CaO-CKD concentration.
    Matched MeSH terms: Plant Oils/metabolism*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links