Electromagnetic (EM) waves transmitted by Horizontal Electric Dipole (HED) source to detect contrasts in subsurface resistivity termed Seabed Logging (SBL) is now an established method for hydrocarbon exploration. However, currently used EM wave detectors for SBL have several challenges including the sensitivity and its bulk size. This work exploits the benefit of superconductor technology in developing a magnetometer termed Superconducting Quantum Interference Device (SQUID) which can potentially be used for SBL. A SQUID magnetometer was fabricated using hexagon shape-niobium wire with YBa2Cu37O, (YBCO) as a barrier. The YBa2Cu37O, samples were synthesized by sol-gel method and were sintered using a furnace and conventional microwave oven. The YBCO gel was dried at 120 degrees C in air for 72 hours. It was then ground and divided into 12 parts. Four samples were sintered at 750 degrees C, 850 degrees C, 900 degrees C, and 950 degrees C for 12 hours in a furnace to find the optimum temperature. The other eight samples were sintered in a microwave with 1100 Watt (W) with a different sintering time, 5, 15, 45 minutes, 1 hour, 1 hour 15 minutes, 1 hour 30 minutes, 1 hour 45 minutes and 2 hours. A DEWAR container was designed and fabricated using fiberglass material. It was filled with liquid nitrogen (LN2) to ensure the superconducting state of the magnetometer. XRD results showed that the optimum sintering temperature for the formation of orthorhombic Y-123 phase was at 950 degrees C with the crystallite size of 67 nm. The morphology results from Field Emission Scanning Electron Microscopy (FESEM) showed that the grains had formed a rod shape with an average diameter of 60 nm. The fabricated SQUID magnetometer was able to show an increment of approximately 249% in the intensity of the EM waves when the source receiver offset was one meter apart.
In this study, a novel nanohybrid composite containing nitrogen-doped multiwalled carbon nanotubes/carboxymethylcellulose (N-MWCNT/CMC) was synthesized for supercapacitor applications. The synthesized composite materials were subjected to an ultrasonication-mediated solvothermal hydrothermal reaction. The synthesized nanohybrid composite electrode material was characterized using analytical methods to confirm its structure and morphology. The electrochemical properties of the composite electrode were investigated using cyclic voltammetry (CV), galvanic charge-discharge, and electrochemical impedance spectroscopy (EIS) using a 3 M KOH electrolyte. The fabricated composite material exhibited unique electrochemical properties by delivering a maximum specific capacitance of approximately 274 F g-1 at a current density of 2 A g-1. The composite electrode displayed high cycling stability of 96% after 4000 cycles at 2 A g-1, indicating that it is favorable for supercapacitor applications.
Legumes provide an essential service to ecosystems by capturing nitrogen from the atmosphere and delivering it to the soil, where it may then be available to other plants. However, this facilitation by legumes has not been widely studied in global tropical forests. Demographic data from 11 large forest plots (16-60 ha) ranging from 5.25° S to 29.25° N latitude show that within forests, leguminous trees have a larger effect on neighbor diversity than non-legumes. Where soil nitrogen is high, most legume species have higher neighbor diversity than non-legumes. Where soil nitrogen is low, most legumes have lower neighbor diversity than non-legumes. No facilitation effect on neighbor basal area was observed in either high or low soil N conditions. The legume-soil nitrogen positive feedback that promotes tree diversity has both theoretical implications for understanding species coexistence in diverse forests, and practical implications for the utilization of legumes in forest restoration.
The production of nitrogenase enzyme and auxins by free living diazotrophs has the potential to influence the growth of host plants. In this study, diazotrophs were grown in the presence of various concentrations of nitogen (N) to determine the optimal concentration of N for microbial growth stimulation, promotion of gaseous N (N2) fixation, and phytohormone production. Therefore, we investigate whether different levels of N supplied to Herbaspirillum seropedicae (Z78) have significant effects on nitrogenase activity and auxin production. The highest nitrogenase activity and the lowest auxin production of H. seropedicae (Z78) were both recorded at 0 gL(-1) of NH4Cl. Higher levels of external N caused a significant decrease in the nitrogenase activity and an increased production of auxins. In a subsequent test, two different inoculum sizes of Z78 (10(6) and 10(12) cfu/ml) were used to study the effect of different percentages of acetylene on nitrogenase activity of the inoculum via the acetylene reduction assay (ARA). The results showed that the optimal amount of acetylene required for nitrogenase enzyme activity was 5% for the 10(6) cfu/ml inoculum, whereas the higher inoculum size (10(12) cfu/ml) required at least 10% of acetylene for optimal nitrogenase activity. These findings provide a clearer understanding of the effects of N levels on diazotrophic nitrogenase activity and auxin production, which are important factors influencing plant growth.
Stable isotope analysis has been used extensively to establish trophic relationships in many ecosystems. Present study utilised stable isotope signatures of carbon and nitrogen to identify trophic structure of aquatic food web in river and rice field ecosystems in Perak, northern peninsular Malaysia. The mean δ(13)C values of all producers ranged from -35.29 ± 0.21 to -26.00 ± 0.050‰. The greatest δ(15)N values noted was in zenarchopterid fish with 9.68 ± 0.020‰. The δ(15)N values of aquatic insects ranged between 2.59 ± 0.107 in Elmidae (Coleoptera) and 8.11 ± 0.022‰ in Nepidae (Hemiptera). Correspondingly, with all the δ(13)C and δ(15)N values recorded, it can be deduced that there are four trophic levels existed in the freshwater ecosystems which started with the producer (plants), followed by primary consumer (aquatic insects and non-predatory fish), secondary consumer (invertebrate predators) and lastly tertiary consumer (vertebrate predators).
Identifying potential food sources in mangrove ecosystems is complex because of the multifarious inputs from both land and sea. This study, which was conducted in the Manko mangrove ecosystem of Okinawa, Japan, determined the composition of the stable isotopes δ(13)C and δ(15)N in primary producers and macrozoobenthos to estimate the potential food sources assimilated and to elucidate the target trophic levels of the macrozoobenthos. We measured the two stable isotope signatures of three gastropods (Cerithidea sp., Cassidula mustelina, Peronia verruculata), two crabs (Grapsidae sp., Uca sp.), mangrove tree (Kandelia candel) leaves, and sediment from the mangrove ecosystem. The respective carbon and nitrogen isotope signature results were as follows: -22.4‰ and 8.6‰ for Cerithidea sp., -25.06‰ and 8‰ for C. mustelina, -22.58‰ and 8‰ for P. verruculata, -24.3‰ and 10.6‰ for unidentified Grapsidae, -21.87 ‰ and 11.5 ‰ for Uca sp., -29.81‰ and 11‰ for K. candel, and -24.23‰ and 7.2‰ for the sediment. The stable isotope assimilation signatures of the macrozoobenthos indicated sediment as their food source. Considering the trophic levels, the stable isotope values may also indicate that the five macrozoobenthos species were secondary or higher consumers.
Modified atmosphere packaging (MAP) has become a popular method for packaging foods as it can extend the shelf life of food with minimal quality defect. Oxygen, nitrogen and carbon dioxide are the common gases used in MAP, Oxygen and carbon dioxide inclusive as only these two gaseous have the preservative effects on the packed food product. Their effect on microbial changes of any food product throughout storage period is highly depend on type of the product and packaging materials, appropriate gas composition, storage temperature, the ratio between gas and product volume, and hygienic manner during processing and packaging. MAP with highest percentage of carbon dioxide is proven to be more effective than vacuum packaging in inhibiting the growth of spoilage and pathogenic bacteria in many fishery products. This article reviews the consequences of MAP towards microbial changes in fishery products.
Cockle (Anadara granosa) meat wash water precipitate was hydrolyzed using bromelain. Experiments were carried out to determine optimum conditions for temperature, enzyme concentration and hydrolysis time using response surface methodology (RSM) based on a central composite rotatable design (CCRD) to obtain the highest value of nitrogen content (NC) and degree of hydrolysis (DH). Results revealed that the optimum conditions for temperature, enzyme concentration and hydrolysis time were 33.7°C, 1.45% (E/S) and 28.42 hrs, respectively. At the optimum condition, hydrolysis of cockle meat wash water precipitate using bromelain resulted in a NC of 0.6% and DH of 48%. The NC and DH were significantly influenced by temperature, enzyme concentration and hydrolysis time. When the bromelain concentration, hydrolysis time and temperature were increased, the values of NC and DH also increased. The hydrolysate produced contained flavor compounds found in clam and oyster which were 3-methylbutanol and 1-pentanol. The compound 3-MCPD was not found in the hydrolysate.
Widespread deforestation has resulted in soil degradation that is often linked to environmental and ecological changes. Rehabilitation of degraded forest is essential to prevent further degradation of the soil. Abundance of soil microbiota could serve as an essential biological indicator of soil health for rehabilitation success. An investigation was conducted to study the relationship between cellulolytic, nitrogen-fixing and phosphate-solubilizing microbial counts and age of rehabilitated forest. A random sampling design was used to obtain four replicates of five composite soil of 0–10 cm depth soil samples of 4, 9, 14 and 19-year-old rehabilitated forest. Three selective media: Congo red cellulose, nitrogen-free malate and calcium phosphate media were used for the enumerations of cellulolytic, nitrogen-fixing and phosphate-solubilizing microbes, respectively. Cellulolytic and phosphate-solubilizing microbes were counted based on the formation of clearing zones, while nitrogen-fixing microbes were based on the formation of blue halo on the respective media. There was positive linear relationship between age of the rehabilitated forest and microbial count. These findings revealed that the potentials of cellulolytic, nitrogen-fixing and phosphate-solubilizing microbial populations could be used as biological indicators of forest soil rehabilitation.
This study investigated the protein quality of two sets of Roselle seeds processed differently (dried and boiled). Twenty weanling Sprague Dawley rats were used to conduct the growth and nitrogen balance studies. Rats were fed with 10% (w/w) protein from dried (DS) and boiled (BS) Roselle seeds powder for 4 weeks. Casein was used in this study as a standard reference protein. There was a significantly higher (p < 0.05) food intake and weight gain by rats fed with BS compared with DS. In the growth study, there was no significant difference (p < 0.05) in protein efficiency ratio (PER) and net protein ratio (NPR) of BS compared to DS, but it was significantly different with casein (CD). PER value of rats fed with DS was significantly lower (p < 0.05) than casein. In the nitrogen balance study, true nitrogen absorption (TNA) and nitrogen balance (NB) of BS group was significantly higher (p < 0.05) than DS group. However, apparent digestibility (AD), true digestibility (TD) and biological value (BV) for both diets was not significantly different. This study showed that the protein quality of dried Roselle seeds was similar to the Roselle seeds boiled at 100oC for 30 minutes.
The growth and production of biosurfactant by P. seudomonas aeruginosa (181) was dependant on nutritional factors. Among the eleven carbon sources tested, glucose supported the maximum growth (0.25 g/L) with the highest biosurfactant yield and this was followed by glycerol. Glucose reduced the surface tension to 35.3 dyne/cm and gave an E24 reading of 62.7%. Butanol gave the lowest growth and had no biosurfactant production. For the nitrogen sources tested, casamino acid supported a growth of 0.21 g/L which reduced the surface tension to 41.1 dyne/cm and gave an E24 reading of 56%. Soytone was assimilated similarly, with good growth and high biosurfactant production. Corn steep liquor gave the lowest growth and did not show any biosurfactant activity.
The profile of total volatile base nitrogen (TVBN), pH, biogenic amines were studied in Indian mackerel packed under different levels of CO2. Gutted and beheaded Indian mackerel was stored in air, vacuum packaging (VP), 30% CO2/65% N2/5% O2 (M30C), 60% CO2/35%N2/5%O2 (M60C), 80% CO2/15%N2/5% O2 (M80C) and 100% CO2 (M100C) at 5°C for 12 days. The application of VP and MAP was effective in retarding the formation of TVBN, total biogenic amines and improve the shelf life of Indian mackerel. Cadaverine obtained the best correlation with storage time when compared with other biogenic amines. Cadaverine or cadaverine + putrescine can serve as a reliable objective freshness indicator of fish stored in different atmospheres. Among the commonly used freshness indices, TVBN was the best quality indicator correlated with histamine. VP and MAP conditions influenced the performance of quality indicators. pH was a good quality indicator of spoilage in air-stored fish except for VP and MAP packed fish. Lower value of TVBN (30 mg/100g) was suggested as an upper limit for this species of fish under MAP condition based on APC and sensory result.
The effect of the addition of different concentrations of chitosan (0–2.0% w/w) on the gelling properties of surimi gels made from African catfish (Clarias gariepinus) was tested. Lipid oxidation, total volatile basic nitrogen (TVB-N), and aerobic plate count (APC) changes during 20 days of storage at 4oC also were evaluated. Surimi gels with 1.5% (w/w) chitosan added exhibited the highest improvement in gel strength (58.92%), whiteness (13.18%), and water holding capacity (36.8%). Incorporation of 2.0% (w/w) chitosan in gels resulted in the lowest TVB-N value (36.63 mg N/100 g) at the end of the 20 days storage period. Both the peroxide values and the 2-thiobarbituric acid values increased more slowly in the chitosan-treated gels than in the control gel during the storage period. Chitosan at concentrations of 1.75% and 2.0% (w/w) conferred the best antioxidant effect on catfish surimi gels and resulted in a significant reduction in APC. Based on the microbiological acceptability limit (106 cfu/g), the shelf life
of surimi gels with 1.75% and 2.0% (w/w) chitosan was extended to 12 days in refrigerated storage at 4oC, whereas the other samples lasted only 8 days. Hence, the addition of 1.5–2.0% (w/w) chitosan is a promising approach for the preparation of catfish surimi gels, as it improves texture, prevents lipid oxidation, and inhibits microbial growth.
The effects of squid ink at concentration of 0.10 and 0.25% on the total bacteria count and
chemical spoilage indicator; total volatile basis nitrogen (TVBN) and trimethylamine (TMA)
of squid (Loligo duvauceli) were analysed. The analysis were performed at interval of 5 days
during 15 days of chilled storage (4°C). This studies also investigate the antioxidant capacity
of the squid ink. The melanin-free squid ink were subjected to ferric reducing power (FRAP)
and 2,2-diphenyl-1-picrylhydrazyl (DPPH) analysis. The FRAP values found in squid ink were
0.04±0.01 µmole TE g-1 meanwhile DPPH values were recorded at 0.81±0.00 µmole TE g-1.
The squid ink at both 0.10 and 0.25% concentration showed a significantly (p
The contribution of microbial depolymerase has received much attention because of its potential in biopolymer degradation. In this study, the P(3HB) depolymerase enzyme of a newly isolated Burkholderia cepacia DP1 from soil in Penang, Malaysia, was optimized using response surface methodology (RSM). The factors affecting P(3HB) depolymerase enzyme production were studied using one-variable-at-a-time approach prior to optimization. Preliminary experiments revealed that the concentration of nitrogen source, concentration of carbon source, initial pH and incubation time were among the main factors influencing the enzyme productivity. An increase of 9.4 folds in enzyme production with an activity of 5.66 U/mL was obtained using optimal medium containing 0.028% N of di-ammonium hydrogen phosphate and 0.31% P(3HB-co-21%4HB) as carbon source at the initial pH of 6.8 for 38 h of incubation. Moreover, the RSM model showed great similarity between predicted and actual enzyme production indicating a successful model validation. This study warrants the ability of P(3HB) degradation by B. cepacia DP1 in producing higher enzyme activity as compared to other P(3HB) degraders being reported. Interestingly, the production of P(3HB) depolymerase was rarely reported within genus Burkholderia. Therefore, this is considered to be a new discovery in the field of P(3HB) depolymerase production.
An experimental study of the field emission from nitrogen doped Diamond-Like-Carbon (DLC) thin films prepared by plasma Chemical Vapor Deposition (CVD) was carried out for the purpose of investigating the characteristic of field electron emission from the surface of nitrogen doped DLC thin film. Thin DLC film was deposited on silicon using the plasma CVD method, from a mixture of Methane (CH4), Helium (He) and Nitrogen (N2) at room temperature. Emission current was measured while high volume of voltage was applied between the cathode-anode diode structures. Barrier height was obtained by current density-electric field (J-E) characteristic in the relation of Fowler-Nordheim equation. The value of barrier height in range of 0.03eV to 0.06eV was obtained and considered as low barrier.
Titanium alloy (e.g. Ti-6Al-4V) has an excellent combination of properties. However in many cases,
the application is limited because of the poor wear property. In this work, a surface modification
(plasma nitriding) is carried out to improve the surface properties of Ti-6Al-4V, as a treatment prior to a hardcoating deposition, leading to a duplex coating system. This is an effort to improve the surface and near surface property of Ti-6Al-4V. Plasma nitriding is performed utilizing microwave plasma method in 25% Ar- 75% N2 atmosphere at temperatures of 600°C and 700°C for different processing times (1, 3 and 5 hours). The phase and microstructure of plasma nitrided substrate were characterized by using X-ray diffraction (XRD) and Scanning electron microscopy (SEM). The plasma nitrided Ti-6Al-4V properties (surface roughness, surface hardness and case depth) were determined using profilometer and microhardness, respectively. Results obtained showed a significant increase on the surface hardness of Ti-6Al-4V. This is due to the formation of TiN and Ti2N phases in the form of compound layer. Besides, it shows that the diffusion of nitrogen into the Ti-6Al-4V substrate produces case depth up to 130 µm and this contributes to the improvement of the near surface hardness due to the changes in the microstructures. It was also found that the surface hardness and surface roughness increased with the increases in the process temperature and times.
This paper studied the thermal behaviour of pineapple leaf fibre (PALF) reinforced high impact polystyrene (HIPS) composite. Thermogravimetric analysis (TGA) and differential scanning calorimetric (DSC) analysis were used to measure the thermal characteristic of HIPS/PALF composites. In particular, the TGA analysis was utilized to measure the degradation and decomposition of materials in neat polystyrene, pineapple fibre, and the composites. The measurements were carried out in the temperature of 25°C – 800°C, at a heating rate of 20°C min-1 and the nitrogen gas flow was 50 mL min-1. The temperature of the DSC analysis was programmed to be between 25°C – 300°C. The results from TGA analysis show that the addition of pineapple fibre has improved the thermal stability of the composites as compared to neat HIPS. In addition, the effects of compatibilising agent and surface modification of PALF with alkali treated were also determined and compared.
In this study the effects of phosphorus and nitrogen levels, temperature and light-dark cycle on the algal growth potential (AGP) of an Antarctic Chlorococcum isolated from an ephemeral stream at Reeve Hill, Antarctica was investigated. The highest AGP was attained when the cultures were grown at high nitrogen concentration (329.87 mg NO3-N/l) and low phosphorus concentration (2.6 mg PO4-P/l) at 4ºC on a 12 h:12 h light-dark cycle. The results showed that Chlorococcum sp. required a high concentration of nitrogen, low concentration of phosphorus, low temperature with equal lengths of light and dark period (12 h:12 h) for optimum growth.
A mononuclear and new tetranuclear metal complexes of Zn(II) with Schiff base ligands L1 and L2 respectively, were synthesised. L1 was obtained through the condensation of salicylaldehyde with ortho-phenylenediamine while L2 was the product of reaction between of ortho-vanillin with 2,4,6-trimethyl-m-phenylenediamine. The ligands and complexes were characterised via elemental analysis, melting point, IR and NMR spectroscopy. The shifting of v(C=N), v(C-OH) and v(O-CH3) infrared peaks upon coordination with Zn(II) indicated that these three moieties play a significant role in the complexation. It was found that L1 acted as tetradentate ligand, coordinating with Zn(II) centres through phenolic oxygen and imine nitrogen. The ligand L2 acted as a hexadentate ligand, bonded to metal via phenolic oxygen, imine nitrogen and methoxy oxygen, where four Zn(II) centres formed bridges to connect two ligands.