MyMedR

Displaying publications 281 - 300 of 583 in total

Abstract:

Sort:

Fulltext The Mentakab hypertension study project. Part V--Drug compliance in hypertensive patients

Lim TO, Ngah BA, Rahman RA, Suppiah A, Ismail F, Chako P, et al.

Singapore Med J, 1992 Feb;33(1):63-6.
PMID: 1598610

Poor compliance with drug treatment is a barrier to effective management of hypertension. Drug compliance behaviour of 168 patients were studied, their drug compliance was measured by the pill-counting method. The prevalence of non-compliance with medication was 26%. Thirteen variables were examined for their association with compliance; these were age, sex, duration of hypertension since diagnosis, adequacy of blood pressure control, complexity of drug regimen and side-effect of drug, history of previous admission for hypertension related reason, patient's knowledge of hypertensive complications, patient's belief that drug was 'panas' or 'san', previous use of traditional treatment for hypertension, patient's fatalistic attitude, their social support and satisfaction with the health services. None of these variables were significantly related to compliance (p greater than 0.05) except adequacy of blood pressure control. The performance of patient self-report was compared with pill-count as a measure of drug compliance; it was poorly predictive of non-compliance (sensitivity = 71%, specificity = 50%). An inverse relationship was found between non-compliance with medication and patient subsequent drop-out rate. Patients who were compliant were more likely to remain on treatment and vice versa. As a measure of drug compliance, detection of drop-out compared well with pill-count (sensitivity 97%, specificity 66%, positive predictive value 89%, negative predictive value 88%).
Study site: outpatient clinic, Hospital Mentakab, Pahang, Malaysia
High prevalence of qacA/B carriage among clinical isolates of meticillin-resistant Staphylococcus aureus in Malaysia

Shamsudin MN, Alreshidi MA, Hamat RA, Alshrari AS, Atshan SS, Neela V

J Hosp Infect, 2012 Jul;81(3):206-8.
PMID: 22633074 DOI: 10.1016/j.jhin.2012.04.015

The minimum inhibitory concentrations (MICs) of 60 meticillin-resistant Staphylococcus aureus (MRSA) isolates from Malaysia to three antiseptic agents - benzalkonium chloride (BZT), benzethonium chloride (BAC) and chlorhexidine digluconate (CHG) - were determined. All isolates had MICs ranging from 0.5 to 2 mg/L. Antiseptic resistance genes qacA/B and smr were detected in 83.3% and 1.6% of the isolates, respectively. Carriage of qacA/B correlated with reduced susceptibility to CHG and BAC. This is the first report of the prevalence of qacA/B and smr gene carriage in Malaysian MRSA isolates, with a high frequency of qacA/B carriage. The presence of these antiseptic resistance genes and associated reduced susceptibility to antiseptic agents may have clinical implications.
Orbital fluid shear stress promotes osteoblast metabolism, proliferation and alkaline phosphates activity in vitro

Aisha MD, Nor-Ashikin MN, Sharaniza AB, Nawawi H, Froemming GR

Exp Cell Res, 2015 Sep 10;337(1):87-93.
PMID: 26163894 DOI: 10.1016/j.yexcr.2015.07.002

Prolonged disuse of the musculoskeletal system is associated with reduced mechanical loading and lack of anabolic stimulus. As a form of mechanical signal, the multidirectional orbital fluid shear stress transmits anabolic signal to bone forming cells in promoting cell differentiation, metabolism and proliferation. Signals are channeled through the cytoskeleton framework, directly modifying gene and protein expression. For that reason, we aimed to study the organization of Normal Human Osteoblast (NHOst) cytoskeleton with regards to orbital fluid shear (OFS) stress. Of special interest were the consequences of cytoskeletal reorganization on NHOst metabolism, proliferation, and osteogenic functional markers. Cells stimulated at 250 RPM in a shaking incubator resulted in the rearrangement of actin and tubulin fibers after 72 h. Orbital shear stress increased NHOst mitochondrial metabolism and proliferation, simultaneously preventing apoptosis. The ratio of RANKL/OPG was reduced, suggesting that orbital shear stress has the potential to inhibit osteoclastogenesis and osteoclast activity. Increase in ALP activity and OCN protein production suggests that stimulation retained osteoblast function. Shear stress possibly generated through actin seemed to hold an anabolic response as osteoblast metabolism and functional markers were enhanced. We hypothesize that by applying orbital shear stress with suitable magnitude and duration as a non-drug anabolic treatment can help improve bone regeneration in prolonged disuse cases.
Short-term moderate hypothermia stimulates alkaline phosphatase activity and osteocalcin expression in osteoblasts by upregulating Runx2 and osterix in vitro

Aisha MD, Nor-Ashikin MN, Sharaniza AB, Nawawi HM, Kapitonova MY, Froemming GR

Exp Cell Res, 2014 Aug 1;326(1):46-56.
PMID: 24928274 DOI: 10.1016/j.yexcr.2014.06.003

Exposure of Normal Human Osteoblast cells (NHOst) to a period of hypothermia may interrupt their cellular functions, lead to changes in bone matrix and disrupt the balance between bone formation and resorption, resulting in bone loss or delayed fracture healing. To investigate this possibility, we exposed NHOst cells to moderate (35 °C) and severe (27 °C) hypothermia for 1, 12, 24 and 72 h. The effects of hypothermia with respect to cell cytoskeleton organization, metabolic activity and the expression of cold shock chaperone proteins, osteoblast transcription factors and functional markers, were examined. Our findings showed that prolonged moderate hypothermia retained the polymerization of the cytoskeletal components. NHOst cell metabolism was affected differently according to hypothermia severity. The osteoblast transcription factors Runx2 and osterix were necessary for the transcription and translation of bone matrix proteins, where alkaline phosphatase (Alp) activity and osteocalcin (OCN) bone protein were over expressed under hypothermic conditions. Consequently, bone mineralization was stimulated after exposure to moderate hypothermia for 1 week, indicating bone function was not impaired. The cold shock chaperone protein Rbm3 was significantly upregulated (p<0.001) during the cellular stress adaption under hypothermic conditions. We suggest that Rbm3 has a dual function: one as a chaperone protein that stabilizes mRNA transcripts and a second one in enhancing the transcription of Alp and Ocn genes. Our studies demonstrated that hypothermia permitted the in vitro maturation of NHOst cells probably through an osterix-dependent pathway. For that reason, we suggest that moderate hypothermia can be clinically applied to counteract heat production at the fracture site that delays fracture healing.
Effect of corn husk fibre loading on thermal and biodegradable properties of kenaf/cornhusk fibre reinforced corn starch-based hybrid composites

Hazrol MD, Sapuan SM, Ilyas RA, Zainudin ES, Zuhri MYM, Abdul NI

Heliyon, 2023 Apr;9(4):e15153.
PMID: 37095902 DOI: 10.1016/j.heliyon.2023.e15153

This paper documents the thermal and biodegradation behaviour of kenaf/cornhusk fiber reinforced corn starch-based hybrid composites film (CS/K-CH) produced by solution casting method. To develop both components as biodegradable hybrid composite, this research used corn starch as matrix, kenaf fiber and cornhusk fibre as a filler. Changes in physical structure and weight from the soil burial test were measured using Mettler Toledo digital balance ME. Films produced from physically blended corn starch reinforced kenaf biocomposites films (CS/K) biocomposite film had faster biodegradation and lost 96.18% of weight within 10 days compared with corn starch hybrid composites that only lost 83.82% of total weight. It was observed that the control film, CS/K biocomposite film was completely degraded after 10 days, meanwhile it took 12 days for hybrid composite films to be fully degrade. The thermal properties such as TGA and DTG were also measured. Addition of corn husk fiber significantly improve the film's thermal properties. Glass transition temperatures of corn starch hybrid films were significantly lowered when cornhusk compositions were increased from 0.2% wt to 0.8% wt. Importantly, the current work has demonstrated that hybrid films made of corn starch can be a suitable biodegradable material for substitute synthetic plastic.
Fulltext Natural Fiber-Reinforced Thermoplastic ENR/PVC Composites as Potential Membrane Technology in Industrial Wastewater Treatment: A Review

Norfarhana AS, Ilyas RA, Ngadi N, Sharma S, Sayed MM, El-Shafay AS, et al.

Polymers (Basel), 2022 Jun 15;14(12).
PMID: 35746008 DOI: 10.3390/polym14122432

Membrane separation processes are prevalent in industrial wastewater treatment because they are more effective than conventional methods at addressing global water issues. Consequently, the ideal membranes with high mechanical strength, thermal characteristics, flux, permeability, porosity, and solute removal capacity must be prepared to aid in the separation process for wastewater treatment. Rubber-based membranes have shown the potential for high mechanical properties in water separation processes to date. In addition, the excellent sustainable practice of natural fibers has attracted great attention from industrial players and researchers for the exploitation of polymer composite membranes to improve the balance between the environment and social and economic concerns. The incorporation of natural fiber in thermoplastic elastomer (TPE) as filler and pore former agent enhances the mechanical properties, and high separation efficiency characteristics of membrane composites are discussed. Furthermore, recent advancements in the fabrication technique of porous membranes affected the membrane's structure, and the performance of wastewater treatment applications is reviewed.
Fulltext Controlling the critical parameters of ultrasonication to affect the dispersion state, isolation, and chiral nematic assembly of cellulose nanocrystals

Nugroho RWN, Tardy BL, Eldin SM, Ilyas RA, Mahardika M, Masruchin N

Ultrason Sonochem, 2023 Oct;99:106581.
PMID: 37690260 DOI: 10.1016/j.ultsonch.2023.106581

Cellulose nanocrystals (CNCs) are typically extracted from plants and present a range of opto-mechanical properties that warrant their use for the fabrication of sustainable materials. While their commercialization is ongoing, their sustainable extraction at large scale is still being optimized. Ultrasonication is a well-established and routinely used technology for (re-) dispersing and/or isolating plant-based CNCs without the need for additional reagents or chemical processes. Several critical ultrasonication parameters, such as time, amplitude, and energy input, play dominant roles in reducing the particle size and altering the morphology of CNCs. Interestingly, this technology can be coupled with other methods to generate moderate and high yields of CNCs. Besides, the ultrasonics treatment also has a significant impact on the dispersion state and the surface chemistry of CNCs. Accordingly, their ability to self-assemble into liquid crystals and subsequent superstructures can, for example, imbue materials with finely tuned structural colors. This article gives an overview of the primary functions arising from the ultrasonication parameters for stabilizing CNCs, producing CNCs in combination with other promising methods, and highlighting examples where the design of photonic materials using nanocrystal-based celluloses is substantially impacted.
Fulltext Delamination and Manufacturing Defects in Natural Fiber-Reinforced Hybrid Composite: A Review

Suriani MJ, Rapi HZ, Ilyas RA, Petrů M, Sapuan SM

Polymers (Basel), 2021 Apr 18;13(8).
PMID: 33919480 DOI: 10.3390/polym13081323

In recent years, most boat fabrication companies use 100% synthetic fiber-reinforced composite materials, due to their high performance of mechanical properties. In the new trend of research on the fabrication of boat structure using natural fiber hybrid with kevlar/fiberglass-reinforced composite, the result of tensile, bending, and impact strength showed that glass fiber-reinforced polyester composite gave high strength with increasing glass fiber contents. At some point, realizing the cost of synthetic fiber is getting higher, researchers today have started to use natural fibers that are seen as a more cost-effective option. Natural fibers, however, have some disadvantages, such as high moisture absorption, due to repelling nature; low wettability; low thermal stability; and quality variation, which lead to the degradation of composite properties. In recent times, hybridization is recommended by most researchers as a solution to natural fiber's weaknesses and to reduce the use of synthetic fibers that are not environmentally friendly. In addition, hybrid composite has its own special advantages, i.e., balanced strength and stiffness, reduced weight and cost, improved fatigue resistance and fracture toughness, and improved impact resistance. The synthetic-nature fiber hybrid composites are used in a variety of applications as a modern material that has attracted most manufacturing industries' attention to shift to using the hybrid composite. Some of the previous studies stated that delamination and manufacturing had influenced the performance of the hybrid composites. In order to expand the use of natural fiber as a successful reinforcement in hybrid composite, the factor that affects the manufacturing defects needs to be investigated. In this review paper, a compilation of the reviews on the delamination and a few common manufacturing defect types illustrating the overview of the impact on the mechanical properties encountered by most of the composite manufacturing industries are presented.
Fulltext Flammability, Tensile, and Morphological Properties of Oil Palm Empty Fruit Bunches Fiber/Pet Yarn-Reinforced Epoxy Fire Retardant Hybrid Polymer Composites

Suriani MJ, Radzi FSM, Ilyas RA, Petrů M, Sapuan SM, Ruzaidi CM

Polymers (Basel), 2021 Apr 14;13(8).
PMID: 33920055 DOI: 10.3390/polym13081282

Oil palm empty fruit bunches (OPEFB) fiber is a natural fiber that possesses many advantages, such as biodegradability, eco-friendly, and renewable nature. The effect of the OPEFB fiber loading reinforced fire retardant epoxy composites on flammability and tensile properties of the polymer biocomposites were investigated. The tests were carried out with four parameters, which were specimen A (constant), specimen B (20% of fiber), specimen C (35% of fiber), and specimen D (50% of fiber). The PET yarn and magnesium hydroxide were used as the reinforcement material and fire retardant agent, respectively. The results were obtained from several tests, which were the horizontal burning test, tensile test, and scanning electron microscopy (SEM). The result for the burning test showed that specimen B exhibited better flammability properties, which had the lowest average burning rate (11.47 mm/min). From the tensile strength, specimen A revealed the highest value of 10.79 N/mm2. For the SEM morphological test, increasing defects on the surface ruptured were observed that resulted in decreased tensile properties of the composites. It can be summarized that the flammability and tensile properties of OPEFB fiber reinforced fire retardant epoxy composites were reduced when the fiber volume contents were increased at the optimal loading of 20%, with the values of 11.47 mm/min and 4.29 KPa, respectively.
Fulltext Potential of Natural Fiber Reinforced Polymer Composites in Sandwich Structures: A Review on Its Mechanical Properties

Alsubari S, Zuhri MYM, Sapuan SM, Ishak MR, Ilyas RA, Asyraf MRM

Polymers (Basel), 2021 Jan 28;13(3).
PMID: 33525703 DOI: 10.3390/polym13030423

The interest in using natural fiber reinforced composites is now at its highest. Numerous studies have been conducted due to their positive benefits related to environmental issues. Even though they have limitations for some load requirements, this drawback has been countered through fiber treatment and hybridization. Sandwich structure, on the other hand, is a combination of two or more individual components with different properties, which when joined together can result in better performance. Sandwich structures have been used in a wide range of industrial material applications. They are known to be lightweight and good at absorbing energy, providing superior strength and stiffness-to-weight ratios, and offering opportunities, through design integration, to remove some components from the core element. Today, many industries use composite sandwich structures in a range of components. Through good design of the core structure, one can maximize the strength properties, with a low density. However, the application of natural fiber composites in sandwich structures is still minimal. Therefore, this paper reviewed the possibility of using a natural fiber composite in sandwich structure applications. It addressed the mechanical properties and energy-absorbing characteristics of natural fiber-based sandwich structures tested under various compression loads. The results and potential areas of improvement to fit into a wide range of engineering applications were discussed.
Fulltext Thermal Stability, Dynamic Mechanical Analysis and Flammability Properties of Woven Kenaf/Polyester-Reinforced Polylactic Acid Hybrid Laminated Composites

Azlin MNM, Sapuan SM, Zuhri MYM, Zainudin ES, Ilyas RA

Polymers (Basel), 2022 Jun 30;14(13).
PMID: 35808734 DOI: 10.3390/polym14132690

This paper presents the thermal and flammability properties of woven kenaf/polyester-reinforced polylactic acid hybrid laminated composites. The effects of the fiber content and stacking sequences of hybrid composites were examined. The hybrid composites were fabricated using the hot press method. Thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and flammability properties of woven kenaf/polyester-reinforced polylactic hybrid composites were reported. The thermal results have demonstrated the effect of the hybridization of the composites on the thermal stability and viscoelastic properties of the laminates. The work also measured the burning rate of the hybrid composites during the flammability test. The S7 sample that consisted of all woven kenaf layers in composite recorded the highest char residue of 10%, and the S8 sample displayed the highest decomposition temperature among all samples. However, as for hybrid composites, the S5 sample shows the optimum result with a high char yield and exhibited the lowest burning rate at 29 mm/min. The S5 sample also shows the optimum viscoelastic properties such as storage and loss modulus among hybrid composites.
Healthcare-associated infections among neonates and children in Pakistan: findings and the implications from a point prevalence survey

Mustafa ZU, Khan AH, Salman M, Harun SN, Meyer JC, Godman B, et al.

J Hosp Infect, 2023 Nov;141:142-151.
PMID: 37774930 DOI: 10.1016/j.jhin.2023.09.011

BACKGROUND: Healthcare-associated infections (HAIs) increase morbidity, mortality and costs. The overall prevalence of HAIs is greater in low- and middle-income countries due to poor resources and infrastructure, with the incidence of HAIs greater among neonates and children. There is a need to understand the current situation in Pakistan including key drivers to improve future care.
METHODS: Point prevalence survey (PPS) of HAIs in the children's wards of 19 public sector secondary- and tertiary-care hospitals of Pakistan and associated key drivers.
RESULTS: A total of 1147 children were included in the PPS. 35.7% were neonates with 32.8% aged >1-5 years. 35.2% were admitted to the intensive care units (ICUs). Peripheral, central venous and urinary catheters were present in 48%, 2.9% and 5.6% of the patients, respectively. A total of 161 HAIs from various pathogens were observed in 153 cases, giving a prevalence of 13.3%. The majority of HAIs were caused by Staphylococcus aureus (31.7%) followed by Klebsiella pneumoniae (22.9%) and Escherichia coli (17.4%). Bloodstream infections were identified in 42 cases followed by lower-respiratory-tract infections in 35. Increased length of hospital stays and being admitted to the ICU, 'rapidly fatal' patients under the McCabe and Jackson criteria, central and peripheral catheterization, and invasive mechanical ventilation were, associated with higher HAIs (P<0.001). 99.7% of HAI patients fully recovered and were discharged from the hospital.
CONCLUSION: There is a high prevalence of HAIs among neonates and children admitted to health facilities in Pakistan. Infection prevention and control measures should be implemented to help prevent future HAIs.
Screening of microfilaricidal effects of plant extracts against Dirofilaria immitis

Merawin LT, Arifah AK, Sani RA, Somchit MN, Zuraini A, Ganabadi S, et al.

Res Vet Sci, 2010 Feb;88(1):142-7.
PMID: 19500810 DOI: 10.1016/j.rvsc.2009.05.017

Canine dirofilariasis is a common tropical parasitic disease of companion animals, caused by infestation of Dirofilaria immitis filarids within the pulmonary arteries and extending into the right heart. Increased reports of adverse reactions elicited by current microfilaricidal agents against D. immitis such as neurological disorders, circulatory collapse and potential resistance against these agents, warrant the search for new agents in forms of plant extracts. The use of plant extracts in therapeutic medicine is commonly met with scepticism by the veterinary community, thus the lack of focus on its medical potential. This study evaluated the presence of microfilaricidal activities of the aqueous extracts of Zingiber officinale, Andrographis paniculata and Tinospora crispa Miers on D. immitisin vitro at different concentrations; 10mg/ml, 1mg/ml, 100 microg/ml, 10 microg/ml and 1 microg/ml within 24h, by evaluation of relative microfilarial motility as a measure of microfilaricidal activity. All extracts showed microfilaricidal activity with Z. officinale exhibiting the strongest activity overall, followed by A. paniculata and T. crispa Miers. It is speculated that the microfilaricidal mechanism exhibited by these extracts is via spastic paralysis based upon direct observation of the microfilarial motility.
Fulltext A practical green synthesis method of Ag NPs using rosy periwinkle plant leaves for solar panel coating

Palanichamy P, Krishnasamy R, Meenakshi Sundaram U, Thiagamani SMK, Ilyas RA, Hassan AM

Heliyon, 2023 Dec;9(12):e22893.
PMID: 38125411 DOI: 10.1016/j.heliyon.2023.e22893

Coated silver nanoparticles (Ag NPs) are currently receiving interest because of their numerous uses in various fields of electronics, antimicrobials, manufacturing sectors, optical science, and pharmaceuticals. Among others, it gained significant attention in the power electronic system. The goal of the proposed study is to use a cost-effective coating material for solar panels; to accomplish this, silver nanoparticles were synthesized from the leaves of the Rosy Periwinkle plants. Green synthesis and characterization, such as Ultraviolet Visible Spectrometer (UV-Vis) analysis, Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), and Fourier Transform Infrared Spectroscopy (FTIR), were carried out after the silver nanoparticles have been collected prior coating. As a consequence, the effectiveness is determined based on the conductivity test, and the resulting Ag NPs are then applied to the c-si layer of the solar panel. Additionally, a modelling and experimental analysis are performed in this study to ascertain the suggested framework's ability to measure energy before and after coating panels with Ag NPs. Specifically, the Voltage Current (VI) and Power Voltage (PV) characteristics were validated in this study for analyzing the effectiveness and the obtained results revealed that the coating of green synthesized Ag NPs generated 2 % more power than the reference solar panel under the same conditions. Further, hardware testing and simulation were both used to confirm the outcomes and effectiveness of the suggested method. The open circuit voltage (Voc), short circuit current (Isc), maximum peak voltage (Vmp), maximum peak current (Imp), and efficiency are taken into account when assessing how well the suggested system performs at tracking. Moreover, the current density characteristics were evaluated with respect to various irradiation conditions for both the typical solar as well as Ag NPs coated panels. From the observation, it is noted that the efficiency level of coated panel was improved up to 19.20 %, 18 %, and 17.20 % for the irradiations of 200 W/m2, 500 W/m2, and 1000 W/m2 respectively.
Fulltext Application of Bayesian structural equation modeling in construction and demolition waste management studies: Development of an extended theory of planned behavior

Mohamed NA, Alanzi ARA, Azizan AN, Azizan SA, Samsudin N, Salarzadeh Jenatabadi H

PLoS One, 2024;19(1):e0290376.
PMID: 38261595 DOI: 10.1371/journal.pone.0290376

Sustainable construction and demolition waste management relies heavily on the attitudes and actions of its constituents; nevertheless, deep analysis for introducing the best estimator is rarely attained. The main objective of this study is to perform a comparison analysis among different approaches of Structural Equation Modeling (SEM) in Construction and Demolition Waste Management (C&DWM) modeling based on an Extended Theory of Planned Behaviour (Extended TPB). The introduced research model includes twelve latent variables, six independent variables, one mediator, three control variables, and one dependent variable. Maximum likelihood (ML), partial least square (PLS), and Bayesian estimators were considered in this study. The output of SEM with the Bayesian estimator was 85.8%, and among effectiveness of six main variables on C&DWM Behavioral (Depenmalaydent variables), five of them have significant relations. Meanwhile, the variation based on SEM with ML estimator was equal to 78.2%, and four correlations with dependent variable have significant relationship. At the conclusion, the R-square of SEM with the PLS estimator was equivalent to 73.4% and three correlations with the dependent variable had significant relationships. At the same time, the values of the three statistical indices include root mean square error (RMSE), mean absolute percentage error (MPE), and mean absolute error (MSE) with involving Bayesian estimator are lower than both ML and PLS estimators. Therefore, compared to both PLS and ML, the predicted values of the Bayesian estimator are closer to the observed values. The lower values of MPE, RMSE, and MSE and the higher values of R-square will generate better goodness of fit for SEM with a Bayesian estimator. Moreover, the SEM with a Bayesian estimator revealed better data fit than both the PLS and ML estimators. The pattern shows that the relationship between research variables can change with different estimators. Hence, researchers using the SEM technique must carefully consider the primary estimator for their data analysis. The precaution is necessary because higher error means different regression coefficients in the research model.
Molecular dynamics simulation and structural analysis of aquaporin Z from an Antarctic Pseudomonas sp. strain AMS3

Balakrishnan S, Rahman RNZRA, Noor NDM, Latip W, Ali MSM

J Biomol Struct Dyn, 2023;41(21):11498-11509.
PMID: 36598349 DOI: 10.1080/07391102.2022.2164519

Aquaporin is a water channel protein that facilitates the movement of water across the cell membrane. Aquaporin from the Antarctic region has been noted for its psychrophilic properties and its ability to perform at a lower temperature but there remains limited understanding of the water mechanism of Antarctic Pseudomonas sp. strain AMS3 However, studies regarding aquaporin isolated from psychrophilic Pseudomonas sp. are still scattered. Recently, the genome sequence of an Antarctic Pseudomonas sp. strain AMS3 revealed a gene sequence encoding for a putative aquaporin designated as AqpZ1 AMS3. In this study, structure analysis and a molecular dynamics (MD) simulation of a predicted model of a fully hydrated aquaporin tetramer embedded in a lipid bilayer was performed at different temperatures for structural flexibility and stability analysis. The MD simulation results revealed that the structures were able to remain stable at low to medium temperatures. The protein was observed to have high flexibility in the loop region as compared to the helices region throughout the simulated temperatures. The selectivity filter and NPA motifs play a major role in solute selectivity and the pore radius of the protein. The structural and functional characterization of this psychrophilic aquaporin provides new insights for the future applications of this protein.Communicated by Ramaswamy H. Sarma.
Exploring nanocellulose frontiers: A comprehensive review of its extraction, properties, and pioneering applications in the automotive and biomedical industries

Yusuf J, Sapuan SM, Ansari MA, Siddiqui VU, Jamal T, Ilyas RA, et al.

Int J Biol Macromol, 2024 Jan;255:128121.
PMID: 37984579 DOI: 10.1016/j.ijbiomac.2023.128121

Material is an inseparable entity for humans to serve different purposes. However, synthetic polymers represent a major category of anthropogenic pollutants with detrimental impacts on natural ecosystems. This escalating environmental issue is characterized by the accumulation of non-biodegradable plastic materials, which pose serious threats to the health of our planet's ecosystem. Cellulose is becoming a focal point for many researchers due to its high availability. It has been used to serve various purposes. Recent scientific advancements have unveiled innovative prospects for the utilization of nanocellulose within the area of advanced science. This comprehensive review investigates deeply into the field of nanocellulose, explaining the methodologies employed in separating nanocellulose from cellulose. It also explains upon two intricately examined applications that emphasize the pivotal role of nanocellulose in nanocomposites. The initial instance pertains to the automotive sector, encompassing cutting-edge applications in electric vehicle (EV) batteries, while the second exemplifies the use of nanocellulose in the field of biomedical applications like otorhinolaryngology, ophthalmology, and wound dressing. This review aims to provide comprehensive information starting from the definitions, identifying the sources of the nanocellulose and its extraction, and ending with the recent applications in the emerging field such as energy storage and biomedical applications.
Revolutionizing lignocellulosic biomass: A review of harnessing the power of ionic liquids for sustainable utilization and extraction

Norfarhana AS, Ilyas RA, Ngadi N, Othman MHD, Misenan MSM, Norrrahim MNF

Int J Biol Macromol, 2024 Jan;256(Pt 1):128256.
PMID: 38000585 DOI: 10.1016/j.ijbiomac.2023.128256

The potential for the transformation of lignocellulosic biomass into valuable commodities is rapidly growing through an environmentally sustainable approach to harness its abundance, cost-effectiveness, biodegradability, and environmentally friendly nature. Ionic liquids (ILs) have received considerable and widespread attention as a promising solution for efficiently dissolving lignocellulosic biomass. The fact that ILs can act as solvents and reagents contributes to their widespread recognition. In particular, ILs are desirable because they are inert, non-toxic, non-flammable, miscible in water, recyclable, thermally and chemically stable, and have low melting points and outstanding ionic conductivity. With these characteristics, ILs can serve as a reliable replacement for traditional biomass conversion methods in various applications. Thus, this comprehensive analysis explores the conversion of lignocellulosic biomass using ILs, focusing on main components such as cellulose, hemicellulose, and lignin. In addition, the effect of multiple parameters on the separation of lignocellulosic biomass using ILs is discussed to emphasize their potential to produce high-value products from this abundant and renewable resource. This work contributes to the advancement of green technologies, offering a promising avenue for the future of biomass conversion and sustainable resource management.
Dietary protein influences on regulation of Haemonchus contortus populations in Dorsimal lambs

Israf DA, Zainal MJ, Ben-Gheshir MA, Rasedee A, Sani RA, Noordin MM

J Helminthol, 1998 Jun;72(2):143-6.
PMID: 9687595

The influence of dietary protein supplementation upon resistance to haemonchosis was examined in Dorsimal (Polled Dorset x Malin) lambs offered two levels of protein. Lambs were offered either a complete basal ruminant diet (15% crude protein (CP)) or the same diet supplemented with fish meal as a source of rumen bypass protein (19% CP). Lambs from each dietary treatment group were given either a 7-week trickle infection with Haemonchus contortus infective larvae (L3) or remained uninfected. All lambs were drenched with anthelmintic at week 8 post-infection (PI), challenged with a single dose of 5000 H. contortus L3 one week later, and killed 14 days post-challenge (PC). Lambs on the supplemented diet that were trickle infected showed a significant reduction in egg output. Supplementation and previous infection did not affect either growth rate, worm burden, worm development or haematological parameters. There was a trend for enhanced growth among supplemented non-infected lambs in comparison to lambs which received the basal ration.
Detection of Vancomycin-Resistant Enterococcus Spp. (VRE) from Poultry

Toosa H, Radu S, Rusul G, Latif AR, Rahim RA, Ahmad N, et al.

Malays J Med Sci, 2001 Jan;8(1):53-8.
PMID: 22973157

Twenty-eight isolates of E. faecalis and 5 isolates of E. hirae were isolated from chicken samples obtained from markets in Sri Serdang, Selangor. They were tested for susceptibility to vancomycin and other antimicrobial agents. All of the isolates showed multiple resistance to the antibiotic tested. All Enterococcus spp. were resistant (100%) to ceftaxidime, cephalothin, erythromycin, gentamicin, kanamycin, nalidixic acid and streptomycin. Resistance was also observed to norfloxacin (97%), tetracycline (91%), penicillin (85%), bacitracin (82%), chloramphenicol (61%) and the least resistance was to ampicillin (27%). High prevalence to vancomycin resistance was detected among the E. faecalis (27of 28) and E. hirae (4 of 5) isolates. The multiple antibiotic resistance index ranging between 0.64 to 1.0 showed that all strains tested originated from high-risk contamination. Plasmid profile analysis of Enterococcus spp. revealed plasmid DNA bands ranging in size from 1.3 to 35.8 megadalton but some isolates were plasmidless. No correlation could be made between plasmid patterns and antibiotic resistance.

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links