Displaying publications 281 - 300 of 852 in total

Abstract:
Sort:
  1. Fulltext Recovery of a Bacteriocin-Like Inhibitory Substance from Lactobacillus bulgaricus FTDC 1211 Using Polyethylene-Glycol Impregnated Amberlite XAD-4 Resins System
    Abdul Aziz NFH, Abbasiliasi S, Ng ZJ, Abu Zarin M, Oslan SN, Tan JS, et al.
    Molecules, 2020 Nov 16;25(22).
    PMID: 33207534 DOI: 10.3390/molecules25225332
    Lactobacillus bulgaricus is a LAB strain which is capable of producing bacteriocin substances to inhibit Staphylococcus aureus. The aim of this study was to purify a bacteriocin-like inhibitory substance (BLIS) produced by L. bulgaricus FTDC 1211 using an aqueous impregnated resins system consisting of polyethylene-glycol (PEG) impregnated on Amberlite XAD4. Important parameters influencing on purification of BLIS, such as the molecular weight and concentration of PEG, the concentration and pH of sodium citrate and the concentration of sodium chloride, were optimized using a response surface methodology. Under optimum conditions of 11% (w/w) of PEG 4000 impregnated Amberlite XAD4 resins and 2% (w/w) of sodium citrate at pH 6, the maximum purification factor (3.26) and recovery yield (82.69% ± 0.06) were obtained. These results demonstrate that AIRS could be used as an alternate purification system in the primary recovery step.
    Matched MeSH terms: Sodium Chloride
  2. α-Sulfo alkyl ester surfactants: Impact of changing the alkyl chain length on the adsorption, mixing properties and response to electrolytes of the tetradecanoate
    Wang Z, Li P, Ma K, Chen Y, Yan Z, Penfold J, et al.
    J Colloid Interface Sci, 2021 Mar 15;586:876-890.
    PMID: 33309145 DOI: 10.1016/j.jcis.2020.10.122
    HYPOTHESIS: The α-sulfo alkyl ester, AES, surfactants are a class of anionic surfactants which have potential for improved sustainable performance in a range of applications, and an important feature is their enhanced tolerance to precipitation in the presence of multivalent counterions. It is proposed that their adsorption properties can be adjusted substantially by changing the length of the shorter alkyl chain, that of the alkanol group in the ester.

    EXPERIMENTS: Surface tension and neutron reflectivity have been used to investigate the variation in the adsorption properties with the shorter alkyl chain length (methyl, ethyl and propyl), the impact of NaCl on the adsorption, the tendency to form surface multilayer structures in the presence of AlCl3, and the effects of mixing the methyl ester sulfonate with the ethyl and propyl ester sulfonates on the adsorption.

    FINDINGS: The variations in the critical micelle concentration, CMC, the adsorption isotherms, the saturation adsorption values, and the impact of NaCl illustrate the subtle influence of varying the shorter alkyl chain length of the surfactant. The non-ideal mixing of pairs of AES surfactants with different alkanol group lengths of the ester show that the extent of the non-ideality changes as the difference in the alkanol length increases. The surface multilayer formation observed in the presence of AlCl3 varies in a complex manner with the length of the short chain and for mixtures of surfactants with different chains lengths.

    Matched MeSH terms: Sodium Chloride
  3. Fulltext Optimization of culture conditions for gamma-aminobutyric acid production by newly identified Pediococcus pentosaceus MN12 isolated from 'mam nem', a fermented fish sauce
    Thuy DTB, Nguyen A, Khoo KS, Chew KW, Cnockaert M, Vandamme P, et al.
    Bioengineered, 2021 12;12(1):54-62.
    PMID: 33350336 DOI: 10.1080/21655979.2020.1857626
    This study was aimed to identify and optimize the culture conditions for gamma-aminobutyric acid (GABA) production by a lactic acid bacterium strain isolated from mam nem, a fermented fish sauce. Among the six isolates obtained from mam nem, the MN12 had the most potent GABA-producing capability. The strain was then identified to be Pedioccocus pentosaceus by employing MALDI-TOF-MS and phenylalanyl-tRNA synthase sequencing methods. The initial cell density of 5.106 CFU/mL, monosodium glutamate concentration of 60 mM, initial pH of 7, temperature of 45°C and cultivation time of 72 h were found to be the optimal culture conditions for highest production of GABA, reaching 27.9 ± 0.42 mM, by this strain. The cultivation conditions for GABA production by P. pentosaceus MN12 have been successfully optimized, providing a foundation for the development of fermented foods enriched with GABA.
    Matched MeSH terms: Sodium Glutamate
  4. Irrigating the pulp space
    Walker D
    Endod Prac, 1999 Feb;2(1):8-12.
    PMID: 10740482
    Matched MeSH terms: Sodium Hypochlorite
  5. Interaction of Aqueous Solutions of a Surface Active Copper(II) Complex with Several Common Surfactants
    Lim YY, Lim KH
    J Colloid Interface Sci, 1997 Dec 01;196(1):116-9.
    PMID: 9441659
    Micellar properties of binary mixed surfactants of a surface active mixed copper(II) chelate, [Cu(C12-tmed)(acac)Cl] (where C12-tmed is N,N,N'-trimethyl-N'-dodecylethylenediamine) with three common surfactants, viz. sodium dodecyl sulfate (SDS), cetyltrimethylammonium bromide (CTAB), and octaethylene glycol monododecyl ether (C12E8), were investigated by surface tensiometry, ESR, and UV-visible absorption techniques. The surface tension data were treated with Rubingh's method for mixed micelle formation and Rosen's method for mixed monolayer formation at the aqueous solution/air interface. It was found that in the mixed micelle there is strong attractive interaction between cationic copper surfactant and anonic dodecyl sulfate while there is almost ideal mixing between copper surfactant and CTAB and C12E8. From the ESR and UV-visible studies, a mixed block-type arrangement of head groups is proposed. Copyright 1997 Academic Press. Copyright 1997Academic Press
    Matched MeSH terms: Sodium Dodecyl Sulfate
  6. Kidney activity increases in copper exposed goldfish (Carassius auratus auratus)
    Moyson S, Liew HJ, Fazio A, Van Dooren N, Delcroix A, Faggio C, et al.
    Comp Biochem Physiol C Toxicol Pharmacol, 2016 Dec;190:32-37.
    PMID: 27521798 DOI: 10.1016/j.cbpc.2016.08.003
    In the present study, the effect of copper was examined in the common goldfish (Carassius auratus auratus). Fish were fasted and exposed to either a high (0.84μM), a low (0.34μM) or a control copper concentration (0.05μM) for 1 and 7days. Swimming performance was not affected by either fasting or copper exposure. Food deprivation alone had no effect on ionoregulation, but low plasma osmolality levels and plasma Na(+) were noticed in fasted fish exposed to Cu for 7days. Both gill Na(+)/K(+)-ATPase and H(+)-ATPase activities were undisturbed, while both kidney ATPase activities were up-regulated when challenged with the high Cu levels. Up-regulated kidney ATPase activities likely acted as compensatory strategy to enhance Na(+) reabsorption. However, this up-regulation was not sufficient to restore Na(+) to control levels in the highest exposure group.
    Matched MeSH terms: Sodium-Potassium-Exchanging ATPase/metabolism*; Sodium/blood
  7. Fulltext Dough mixing and thermal properties including the pasting profiles of composite flour blends with added hydrocolloids
    Ho, L. H., Noor Aziah, A. A.
    International Food Research Journal, 2013;20(2):911-917.
    MyJurnal
    Dough mixing and thermal properties including the pasting profiles of various commercial wheat flour (WF)-banana pseudostem flour (BP)-hydrocolloid blends were determined using a farinograph, differential scanning calorimetry (DSC) and a rapid-visco analyser (RVA). The prepared blends were WF, WF substituted with 10% BP (10BP) and 10BP with added 0.8% w/w (flour weight basis) xanthan gum (XG) or sodium carboxymethylcellulose (CMC) (10BPX and 10BPC, respectively). The dough of 10BP and the doughs containing XG or CMC reduced stability and breakdown time compared with the WF dough. All dough containing BP demonstrated greater water absorption and mixing tolerance index values than the WF dough. The substitution of 10% BP into WF and the addition of hydrocolloids did not significantly affect the conclusion temperature (Tc) of the mixture, but did increased the onset temperature (To), peak temperature (Tp) and decreased the gelatinisation enthalpy change (ΔHg) of the blends. Samples of 10BP, 10BPX and 10BPC significantly decreased (p
    Matched MeSH terms: Carboxymethylcellulose Sodium
  8. Fulltext Effects of different processing methods of human amniotic membrane on the quality of extracted RNA
    Rusidah Mat Yatim, Kannan, Thirumulu Ponnuraj, Suzina Sheikh Ab Hamid, Shazana Hilda Shamsudin
    Archives of Orofacial Sciences, 2013;8(2):47-53.
    MyJurnal
    The aim of this study was to determine the efficiency of different human amniotic membrane (HAM) processing methods on the concentration, purity and integrity of RNA. Two different techniques (Technique1 andTechnique2) were employed for the processing of HAM, which differed in terms of washing solution, sample storage conditions and processing time. Based on preservation of HAM, three groups were formed under each technique. In Technique 1, the groups were fresh frozen 1 (F1), glycerol preserved (GP) and gamma irradiated glycerol preserved (IGP); where else in Technique 2, the groups were fresh frozen 2 (F2), 50%glycerol/Dulbecco’s modified Eagle medium (DMEM) cryopre served HAM diluted with phosphate buffered saline(GB) and 50% glycerol/DMEM cryop reserved HAM diluted with diethyl procarbonate water (GD). Total RNA was extracted from the samples and their concentration, purity and integrity were examined. The F2 sample of which there was no pre-washing step and involved direct sample storage at-80oC, shorter processing time and chilled processing conditions had yielded better quality of RNA compared to the others.
    Matched MeSH terms: Sodium Chloride
  9. Fulltext Antimicrorobial evaluation of sodium hypochlorite and ozonated water on E. faecalis biofilm
    Ibrahim, N.Z., Abdullah, M.
    Ann Dent, 2008;15(1):20-26.
    MyJurnal
    This study aim to evaluate antimicrobial efficacy of sodium hypochlorite (NaOCl) and ozonated water against Enterococci faecalis biofilm. The bacterial biofilm was exposed to 2.62%, 1.31% NaOCl and 0.1 ppm ozonated water over a range of time periods. The presence of viable cells was determined by enumeration of colony forming units (CFU). All experiments were repeated four times (n=4). The effectiveness of the agents was compared using nonparametric Kruskal- Wallis test. The result revealed that 2.62% of NaOCl can completely kill E. faecalis biofilm in 15 minutes whereas 1.31 % NaOCl required a longer time to produce such effect. 0.1 ppm ozonated, however, did not exhibit any antimicrobial effect within the period of time tested. From this study, it can be concluded that 0.1 ppm ozonated water was not comparable with 2.62% and 1.31% NaOCl in antimicrobial efficacy against E. faecalis biofilm.
    Matched MeSH terms: Sodium Hypochlorite
  10. Fulltext Method optimization on the process of Iontophoresis with laser doppler fluximetry in the assessment of microvascular endothelial function
    Belqes Abdullah, A. T., Yvonne, T. G. B., Ahmad, S. H., Abdul Aziz, A. S. I., Aida, H. G. R.
    Malaysian Journal of Medicine and Health Sciences, 2011;7(1):35-40.
    MyJurnal
    Introduction: Iontophoresis of vasoactive substances such as acetylcholine (ACh) and sodium nitroprusside (SNP) combined with Laser Doppler fluximetry (LDF) is a non-invasive tool used to determine microvascular endothelial function. This study aims to test the effect of sodium chloride on
    non-specific vasodilatation when used as a vehicle in the process of iontophoresis. This study also aims to define the number of current pulses needed to get the maximum effect during iontophoresis with ACh and SNP using low current strength. Methods: The experiment was conducted in five healthy females. Baseline skin perfusion was taken before administration of seven current pulses. Current strength of 0.007 mA and current density of 0.01 mA/cm2 were used. Acetylcholine was used to assess endothelial dependent vasodilatation, while SNP was used to assess endothelial independent vasodilatation. The mean skin perfusion (AU) responses to the iontophoresis of ACh at the anodal and SNP at the cathode leads were recorded. Sodium chloride (0.9%) was used as a vehicle to obtain concentration of 1% for both ACh and SNP. Iontophoresis of pure vehicle (NaCl) was conducted on a separate day to observe the effect of vehicle only on the iontophoresis process at both anode and cathode. Results: Iontophoresis of NaCl showed no significant increase in perfusion compared to baseline at both anode and cathode. Significant increases in skin perfusion were observed with SNP and ACh; a plateau of ACh was reached from the 3rd pulse onwards; while the plateau of SNP was reached from the 4th pulse onwards. Conclusion: NaCl could be used as a vehicle for Ach and SNP during iontophoresis as it did not cause non-specific vasodilatation. Using five current pulses are adequate for iontophoresis of ACh and SNP to assess microvascular endothelial function.
    Matched MeSH terms: Sodium Chloride
  11. Fulltext Analysis of process parameters effect on synthesis of carboxymethylcellulose
    Krisnaiah, Duduku, Yan, Yan Farm, Awang Bono, Noor Maizura Ismail, Lee, Muei Chng
    Pertanika Journal of Science & Technology, 2009;17(2):-.
    MyJurnal
    Synthesis of carboxymethylcellulose (CMC) from natural cellulose is an important industrial process. The effect of process parameters on the synthesis process is important information for the efficiency improvement of production process. Most of the previous studies on the effect of process parameters
    on the synthesis of CMC are based on the One-Factor-At-Time (OFAT); therefore, in this work, the response surface methodology (RSM) was used. Here, the cellulose was converted to CMC through
    carboxymethylation process using a technique of William etherification in heterogeneous system. The process parameters studied include the solvent ratio, reaction temperature and reactant ratio (molar ratio of NaOH to SMCA). Meanwhile, the analysis and optimization of the responses of the process, degree of substitution (DS) and yield were also performed using the response surface methodology. The validity of the synthesis process was identified by the determination of CMC spectrum using the fast Fourier infrared spectrometer (FTIR). The analysis of the results shows that carboxymethylation is strongly affected by combination of process parameters studied. The results obtained also show that the optimum responses, degree of substitution (DS) is 0.87 and yield is 1.80, whereas the optimum process parameters, solvent ratio is 0.70v/v, reaction temperature at 56.03oC, and molar ratio of NaOH to SMCA at 1.00mol/mol. These findings conclude that the DS and yield of carboxymethylation of cellulose are strongly affected by the combination of the process parameters.
    Matched MeSH terms: Carboxymethylcellulose Sodium
  12. Fulltext Preparation and characterization of glass-ceramic synthesized from soda lime glass and wastewater sludge
    Zaidan Abdul Wahab, Syaharudin Zaibon, Khamirul Amin Matori, Norfarezah Hanim Edros, Thai, Ming Yeow, Mohd Zul Hilmi Mayzan, et al.
    Pertanika Journal of Science & Technology, 2010;18(2):-.
    MyJurnal
    This paper reports an alternative method for making glass-ceramic from disposal waste water
    sludge and soda lime silica (SLS) glass. The glass ceramic samples were prepared from a mixture
    of wastewater sludge and SLS glasses, melted at 1375°C for 3 hours and quenched by pouring into
    water to obtain a coarse frit. The frit glass was then crushed and sieved to 106μm before it was
    pressed to a pellet. The sintering process was performed at various temperatures between 700-
    1000°C for 2 hours and morphologically characterized with XRD, SEM, and EDX. Overall results
    showed the crystalline phase of diopside sodian-critobalite glass-ceramic is depending on thermal
    treatment process and making them attractive to industrial uses such as in construction, tiling, and
    glass-ceramic applications.
    Matched MeSH terms: Sodium Hydroxide
  13. Fulltext Differentiation of ripe banana flour using mineral composition and logistic regression model
    Abbas F.M.A., Saifullah, R., Azhar, M.E.
    International Food Research Journal, 2009;16(1):83-87.
    MyJurnal
    Cavendish (Musa paradisiaca L, cv cavendshii) and Dream (Musa acuminata colla. AAA, cv ‘Berangan’) banana flours were prepared from ripe fruits collected from eleven markets located in Penang, Malaysia. The mineral composition (Na, K, Ca, Mg, Cu, Fe, Mn, Zn) of the flour were analyzed by atomic absorption spectrophotometer and the data obtained were analyzed using logistic regression model. Ripe banana flours were rich source of K and a fair source of other minerals, however logistic regression model identified Mg as an indicator to discriminate between the two types of banana flour affording 100 % correct assignation. Based on this result, mineral analysis may be suggested as a method to authenticate ripe banana flour. This study also presents the usefulness of logistic regression technique for analysis and interpretation of complex data.
    Matched MeSH terms: Sodium, Dietary
  14. Fulltext Mineral contents of selected marine fish and shellfish from the west coast of Peninsular Malaysia
    Nurnadia, A.A., Azrina, A., Amin, I., Mohd Yunus, A.S., Mohd Izuan Effendi, H.
    International Food Research Journal, 2013;20(1):431-437.
    MyJurnal
    The study was conducted to determine the mineral contents of 20 species of marine fish and 4 species of shellfish from the west coast of Peninsular Malaysia.Overall, the contents of micro minerals in all samples were below the permissible limits; except for oyster; with copper slightly higher than the limit set by FAO/WHO (1984), but below the limit set by Malaysian Food Regulations (1985); and zinc content higher than the limit set by Malaysian Food Regulations (1985), but below the limit set by FAO/WHO (1984). Meanwhile for macro minerals, most samples contained comparable sodium contents, significantly lower of potassium contents, higher calcium contents, and extremely higher of magnesium contents compared to the common ranges reported in the literatures. All samples were good sources of micro and macro minerals and could provide multi-health benefits if consumed in recommended amounts.
    Matched MeSH terms: Sodium
  15. Fulltext Inadequate iodine intake among school children in Terengganu-findings from the national iodine deficiency disorder survey 2008
    Lim, Kuang Kuay, Chan, Ying Ying, Ahmad Ali Zainuddin, Teh, Chien Huey, Rusidah Selamat, Kee, Chee Cheong, et al.
    Int J Public Health Res, 2013;3(1):198-203.
    MyJurnal
    Iodine deficiency is still prevalent worldwide and it is the main cause of goiter, thyroid dysfunction and mental retardation. The aim of the study was to determine the iodine status and goiter prevalence among the school children in Terengganu. The representative sample consists of 1163 primary school children aged 8-10 years old randomly selected from urban and rural schools in Terengganu using stratified systematic random sampling technique. Urinary iodine levels in spot urine were determined by in house modified micro-method while goiter assessment was carried out by palpation of thyroid gland. The status of iodine deficiency was determined by the median urinary iodine concentrations (UIC) and total goiter prevalence (TGP) in accordance with the WHO criteria. The result showed the median [inter-quartile range (IQR)] urinary iodine concentrations was 78.7µg/L (50.1µg/L -120.0µg/L) indicating the iodine intake was slightly lower than recommended range of 100 µg/L. The rural school children had a significantly lower Iodine levels (median UIC=72.4µg/L, IQR=46.7µg/L -113.0µg/L) than the urban school children (median UIC=87.7µg/L, IQR=54.5 µg/L - 127.5µg/L). The total goiter prevalence (TGP) was 5.7%. The prevalence of goiter was significantly higher in rural (TGP=6.9%) compared to urban areas (TGP=3.6%). The study revealed that school children in Terengganu showed mild iodine deficiency and the condition is more pronounced in children from rural areas. The findings emphasize the importance of intervention implementation, universal salt iodization to ensure sufficient intake of iodine among the Terengganu school children.
    Matched MeSH terms: Sodium Chloride, Dietary
  16. Fulltext Method development for determination of sodium, potassium and calcium ions concentrations in hot springs water using EDXRF
    Zaini Hamzah, Nurul Latiffah Abd Rani, Ahmad Saat
    Journal of Nuclear and Related Technologies, 2013;2013(2):59-64.
    MyJurnal
    Measurement of major cation such as Na+, K+, and Ca2+ in water are normally carried out using
    AAS, ICP-OES or flame photometry. In this study, an attempt was made to measure these cations
    using Energy Dispersive X-ray Fluorescent Spectrometry (EDXRF). Hot spring s water was taken from varies hot spring in Selangor and divided into two portions that is filtered and unfiltered. 5 mL of water samples were pipette into a special liquid cups (sample holders) which has a thin mylar film underneath. The MiniPal4 XRF instrument was used in this study. The resolution for the instrument use is 145 keV with energy resolution at 5.9 keV. The spectrum of cations were analysed by using MiniPal/MiniMate software to determine the cations concentration. For K+ and Ca2+, Al-thin filter was used and default filter was used for Na+. The concentration of Na+ obtained for filtered and unfiltered samples were ranged from 38.00 to 66.05 and 43.26 to 76.95 ppm. Meanwhile, concentrations of K+ for filtered and unfiltered samples were ranged from 2.42 to 8.07 and 6.18 to 29.28 ppm. Concentrations of Ca2+ for filtered and unfiltered samples were ranged from 2.59 to 10.94 and 3.18 to 12.99 ppm.
    Matched MeSH terms: Sodium
  17. Fulltext Physicochemical characteristics of gummy added with sutchi catfish (Pangasius hypophthalmus) gelatin
    Normah, I.
    International Food Research Journal, 2015;22(3):1059-1066.
    MyJurnal
    Gelatin from sutchi catfish (Pangasius hypophthalmus) skin was extracted and applied in the preparation of gummy in order to determine the suitability of sutchi catfish gelatin in gummy production. The skin was subjected to pre-treatment in the following sequence; 0.8M NaCl, 0.19 N NaOH followed by 0.12 N acetic acid prior to 12 hours extraction in distilled water at 50oC. The physicochemical characteristics of sutchi catfish gelatin was analysed and compared with the commercial bovine gelatin. Gummy added with sutchi catfish gelatin was also compared with gummy added with commercial gelatin. Analysis comprises of yield, gel strength, setting point and setting time, amino acid composition, texture profile analysis and sensory evaluation. The extraction resulted in 14.47% yield of gelatin. Sutchi catfish gelatin showed higher gel strength value (360.86 g) compared to the commercial gelatin (217.37 g) which is in accordance with proline content. Texture profile analysis showed that gummies prepared using sutchi catfish gelatin had significantly higher (p
    Matched MeSH terms: Sodium Chloride
  18. Fulltext Detection of tetrodotoxin and saxitoxin in dried salted yellow puffer fish (Xenopterus naritus) eggs from Satok Market, Kuching, Sarawak
    Mohd Nor Azman, A., Wan Norhana, M.N.
    International Food Research Journal, 2013;20(5):2963-2966.
    MyJurnal
    The detection of tetrodotoxin (TTX) and saxitoxin (STX) in dried salted yellow puffer fish (Xenopterus naritus) eggs bought from Satok Market, Kuching, Sarawak was carried out by mouse bioassay method. The amount of TTX and STX detected in the samples ranged from 95.6-195.5 Mouse Unit (MU)/g and 1.72-3.58 MU/g respectively. The results indicate that the dried salted eggs samples were found to contain TTX 9-20 times above the regulatory limit for human consumption (10 MU/g). Although detected, the amount of STX in salted eggs extract was slightly below the accepted threshold limit (4 MU/g). The local public in Sarawak should be educated on the potential danger of consuming dried salted puffer fish eggs in addition to the current warnings on puffer fish.
    Matched MeSH terms: Sodium Chloride
  19. Fulltext Effect of different types of hydrocolloids on the physical and sensory properties of ice cream with fermented glutinous rice ( tapai pulut)
    Shukri, W.H.Z., Hamzah, E.N.H., Halim, N.R.A., Isa, M.I.N., Sarbon, N.M.
    International Food Research Journal, 2014;21(5):1777-1787.
    MyJurnal
    The aim of this work is to study the effect of hydrocolloids (guar gum, xanthan gum and carboxymethyl cellulose (CMC) on the physical properties and sensory evaluation of ice cream produced in order to investigate the potential of applying fermented glutinous rice (tapai pulut) as a value-added ingredient. The addition of 25% fermented glutinous rice was the most reliable amount to enhance the physical and sensory properties of ice cream when incorporating hydrocolloids. The addition of hydrocolloids significantly (p < 0.05) increased the pH, firmness, overrun, and melting rate of fermented glutinous rice ice cream. The addition of guar gum scored the highest firmness value (5403 g) followed by CMC (4630 g) and xanthan gum (3481g). Fermented glutinous rice ice cream with xanthan gum added, induced a noticeable change in overrun value (62%) while the addition of CMC decreased the melting rate compared to the control. The FTIR spectrum of fermented glutinous rice ice cream with different hydrocolloids containing carboxyl, amide and carbonyl group was appeared at 3362-3379 cm-1 , 1639-1640 cm-1 and 1026-1064 cm-1, respectively. In conclusion, the addition of xanthan gum presented great potential to improve the quality of fermented glutinous rice ice cream produced in terms of its firmness, overrun and melting rate.
    Matched MeSH terms: Carboxymethylcellulose Sodium
  20. Fulltext Comparison of Pressure-Retarded Osmosis Performance between Pilot-Scale Cellulose Triacetate Hollow-fiber and Polyamide Spiral-Wound Membrane Modules
    Kakihana Y, Jullok N, Shibuya M, Ikebe Y, Higa M
    Membranes (Basel), 2021 Feb 28;11(3).
    PMID: 33671075 DOI: 10.3390/membranes11030177
    Pressure-retarded osmosis (PRO) has recently received attention because of its ability to generate power via an osmotic pressure gradient between two solutions with different salinities: high- and low-salinity water sources. In this study, PRO performance, using the two pilot-scale PRO membrane modules with different configurations-five-inch cellulose triacetate hollow-fiber membrane module (CTA-HF) and eight-inch polyamide spiral-wound membrane modules (PA-SW)-was evaluated by changing the draw solution (DS) concentration, applied hydrostatic pressure difference, and the flow rates of DS and feed solution (FS), to obtain the optimum operating conditions in PRO configuration. The maximum power density per unit membrane area of PA-SW at 0.6 M NaCl was 1.40 W/m2 and 2.03-fold higher than that of CTA-HF, due to the higher water permeability coefficient of PA-SW. In contrast, the maximum power density per unit volume of CTA-SW at 0.6 M NaCl was 4.67 kW/m3 and 6.87-fold higher than that of PA-SW. The value of CTA-HF increased to 13.61 kW/m3 at 1.2 M NaCl and was 12.0-fold higher than that of PA-SW because of the higher packing density of CTA-HF.
    Matched MeSH terms: Sodium Chloride
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links