Displaying publications 301 - 320 of 1919 in total

Abstract:
Sort:
  1. Karniza Khalid, Thyagarajan, Dandaithapani, Muhammad Zul Azri Mohammad Yusof, Ruzita Jamaluddin
    MyJurnal
    Medical professionals work in a constantly stressful environment. The nature of the profession requires routine extended working hours, but little is known about the effect of long working hours on selective physiological measures. A cross-sectional feasibility study was conducted from 1 October 2017 until 30 April 2018 on medical doctors in a tertiary health centre in northwest Malaysia. There was a total of 55 study participants recruited. The overall systolic blood pressure (SBP) was highest after working 24-hour stretch (p=0.006) and the overall diastolic blood pressure (DBP) were highest after working for 33 hours in a single stretch, at the end of on call rotation (p
    Matched MeSH terms: Blood Pressure
  2. Ho JJ, Subramaniam P, Sivakaanthan A, Davis PG
    Cochrane Database Syst Rev, 2020 10 15;10:CD002975.
    PMID: 33058139 DOI: 10.1002/14651858.CD002975.pub2
    BACKGROUND: The application of continuous positive airway pressure (CPAP) has been shown to have some benefits in the treatment of preterm infants with respiratory distress. CPAP has the potential to reduce lung damage, particularly if applied early before atelectasis has occurred. Early application may better conserve an infant's own surfactant stores and consequently may be more effective than later application.

    OBJECTIVES: • To determine if early compared with delayed initiation of CPAP results in lower mortality and reduced need for intermittent positive-pressure ventilation in preterm infants in respiratory distress ○ Subgroup analyses were planned a priori on the basis of weight (with subdivisions at 1000 grams and 1500 grams), gestation (with subdivisions at 28 and 32 weeks), and according to whether surfactant was used ▫ Sensitivity analyses based on trial quality were also planned ○ For this update, we have excluded trials using continuous negative pressure SEARCH METHODS: We used the standard search strategy of Cochrane Neonatal to search the Cochrane Central Register of Controlled Trials (CENTRAL; 2020, Issue 6), in the Cochrane Library; Ovid MEDLINE(R) and Epub Ahead of Print, In-Process & Other Non-Indexed Citations Daily and Versions(R); and the Cumulative Index to Nursing and Allied Health Literatue (CINAHL), on 30 June 2020. We also searched clinical trials databases and the reference lists of retrieved articles for randomised controlled trials (RCTs) and quasi-RCTs.

    SELECTION CRITERIA: We included trials that used random or quasi-random allocation to either early or delayed CPAP for spontaneously breathing preterm infants in respiratory distress.

    DATA COLLECTION AND ANALYSIS: We used the standard methods of Cochrane and Cochrane Neonatal, including independent assessment of trial quality and extraction of data by two review authors. We used the GRADE approach to assess the certainty of evidence.

    MAIN RESULTS: We found four studies that recruited a total of 119 infants. Two were quasi-randomised, and the other two did not provide details on the method of randomisation or allocation used. None of these studies used blinding of the intervention or the outcome assessor. Evidence showed uncertainty about whether early CPAP has an effect on subsequent use of intermittent positive-pressure ventilation (IPPV) (typical risk ratio (RR) 0.77, 95% confidence interval (CI) 0.43 to 1.38; typical risk difference (RD) -0.08, 95% CI -0.23 to 0.08; I² = 0%, 4 studies, 119 infants; very low-certainty evidence) or mortality (typical RR 0.93, 95% CI 0.43 to 2.03; typical RD -0.02, 95% CI -0.15 to 0.12; I² = 33%, 4 studies, 119 infants; very low-certainty evidence). The outcome 'failed treatment' was not reported in any of these studies. There was an uncertain effect on air leak (pneumothorax) (typical RR 1.09, 95% CI 0.39 to 3.04, I² = 0%, 3 studies, 98 infants; very low-certainty evidence). No trials reported intraventricular haemorrhage or necrotising enterocolitis. No cases of retinopathy of prematurity were reported in one study (21 infants). One case of bronchopulmonary dysplasia was reported in each group in one study involving 29 infants. Long-term outcomes were not reported.

    AUTHORS' CONCLUSIONS: All four small trials included in this review were performed in the 1970s or the early 1980s, and we are very uncertain whether early application of CPAP confers clinical benefit in the treatment of respiratory distress, or whether it is associated with any adverse effects. Further trials should be directed towards establishing the appropriate level of CPAP and the timing and method of administration of surfactant when used along with CPAP.

    Matched MeSH terms: Intermittent Positive-Pressure Ventilation/statistics & numerical data; Continuous Positive Airway Pressure/methods*
  3. Wong C, Ling YS, Wee JLS, Mujahid A, Müller M
    Sci Rep, 2020 12 14;10(1):21861.
    PMID: 33318532 DOI: 10.1038/s41598-020-78873-3
    Nepenthes, as the largest family of carnivorous plants, is found with an extensive geographical distribution throughout the Malay Archipelago, specifically in Borneo, Philippines, and Sumatra. Highland species are able to tolerate cold stress and lowland species heat stress. Our current understanding on the adaptation or survival mechanisms acquired by the different Nepenthes species to their climatic conditions at the phytochemical level is, however, limited. In this study, we applied an eco-metabolomics approach to identify temperature stressed individual metabolic fingerprints of four Nepenthes species: the lowlanders N. ampullaria, N. rafflesiana and N. northiana, and the highlander N. minima. We hypothesized that distinct metabolite regulation patterns exist between the Nepenthes species due to their adaptation towards different geographical and altitudinal distribution. Our results revealed not only distinct temperature stress induced metabolite fingerprints for each Nepenthes species, but also shared metabolic response and adaptation strategies. The interspecific responses and adaptation of N. rafflesiana and N. northiana likely reflected their natural habitat niches. Moreover, our study also indicates the potential of lowlanders, especially N. ampullaria and N. rafflesiana, to produce metabolites needed to deal with increased temperatures, offering hope for the plant genus and future adaption in times of changing climate.
    Matched MeSH terms: Chromatography, High Pressure Liquid
  4. Khoo HT, Leow CH
    Talanta, 2021 Mar 01;224:121777.
    PMID: 33379011 DOI: 10.1016/j.talanta.2020.121777
    Fast and efficient separation remains a big challenge in high performance liquid chromatography (HPLC). The need for higher efficiency and resolution in separation is constantly in demand. To achieve that, columns developed are rapidly moving towards having smaller particle sizes and internal diameters (i.d.). However, these parameters will lead to high back-pressure in the system and will burden the pumps of the HPLC instrument. To address this limitation, monolithic columns, especially silica-based monolithic columns have been introduced. These columns are being widely investigated for fast and efficient separation of a wide range of molecules. The present article describes the current methods developed to enhance the column efficiency of particle packed columns and how silica monolithic columns can act as an alternative in overcoming the low permeability of particle packed columns. The fundamental processes behind the fabrication of the monolith including the starting materials and the silica sol-gel process will be discussed. Different monolith derivatization and end-capping processes will be further elaborated and followed by highlights of the performance such monolithic columns in key applications in different fields with various types of matrices.
    Matched MeSH terms: Chromatography, High Pressure Liquid
  5. Ishida A, Toma T, Matsumoto Y, Yap SK, Maruyama Y
    Tree Physiol, 1996 Sep;16(9):779-85.
    PMID: 14871685
    Dryobalanops aromatica Gaertn. f. is a major tropical canopy species in lowland tropical rain forests in Peninsular Malaysia. Diurnal changes in net photosynthetic rate (A) and stomatal conductance to water vapor (g(s)) were measured in fully expanded young and old leaves in the uppermost canopy (35 m above ground). Maximum A was 12 and 10 micro mol m(-2) s(-1) in young and old leaves, respectively; however, because of large variation in A among leaves, mean maximum A in young and old leaves was only 6.6 and 5.5 micro mol m(-2) s(-1), respectively. Both g(s) and A declined in young leaves when T(leaf) exceeded 34 degrees C and leaf-to-air vapor pressure deficit (DeltaW) exceeded 0.025, whereas in old leaves, g(s) and A did not start to decline until T(leaf) and DeltaW exceeded 36 degrees C and 0.035, respectively. Under saturating light conditions, A was linearly related to g(s). The coefficient of variation (CV) for the difference between the CO(2) concentrations of ambient air and the leaf intercellular air space (C(a) - C(i)) was smaller than the CV for A or g(s), suggesting that maximum g(s) was mainly controlled by mesophyll assimilation (A/C(i)). Minimum C(i)/C(a) ratios were relatively high (0.72-0.73), indicating a small drought-induced stomatal limitation to A and non-conservative water use in the uppermost canopy leaves.
    Matched MeSH terms: Vapor Pressure
  6. Tan GH, Chong CL
    Environ Monit Assess, 1993 Feb;24(3):267-77.
    PMID: 24227384 DOI: 10.1007/BF00545983
    The Klang River Basin is located in the most densely populated region in Malaysia, with its heavy concentration of industries and population. A systematic study of the pollution to this river system caused by phenolic compounds have been carried out under this project. Analyses of water samples from the Klang River by high performance liquid chromatography (HPLC) with an ultraviolet (UV) detector at 280 nm have shown the presence of some priority phenolic pollutants.
    Matched MeSH terms: Chromatography, High Pressure Liquid
  7. Wee, Siaw Khur, Chok, Vui Soon, Gorin, Alexander, Chua, Han Bing, Yan, Hong Ming
    MyJurnal
    Compartmented Fluidized Bed Gasifier (CFBG), consisting of two compartments - the combustorand gasifier, uses air blown instead of pure oxygen for syngas production in bubbling fluidization mode, eliminating the need of air separation unit, and reducing the capital cost, thus distinguishes it from other traditional ones. Fluidization quality is a determining factor in the CFBG to guarantee its well-lifted behaviour. Previous study, without solid circulation at ambient conditions, brought to the fore the necessity of considering the effect of the minimum allowable effective diameter. The study was then performed in the CFBG cold physical model of 0.66m overall diameter (effective diameter for combustor and gasifier is 0.413m and 0.257m) to investigate the fluidization quality and compare it with the results obtained from the previous cold model of about 1.36 times smaller, but with the same compartmented ratio of 65:35. Different inert particles (river sand, quartz sand and alumina) were used, over a range of aspect ratios, for the aforementioned objective. The results showed that the fluidization quality in the gasifier has not been achieved and the degradation of fluidization quality in the combustor is still observed, notwithstanding the fact that the condition of the minimum allowable effective diameter has been met. The reduction of distributor free area, to increase the distributor pressure drop, showed a marginal effect on the quality. The effect of the minimum allowable effective diameter on fluidization quality in CFBG as well as the interplay of geometric and operational parameters require further studies be carried out. The fluidization quality of the binary mixture is also currently under investigation.
    Matched MeSH terms: Pressure
  8. Ahmad, D., Jamarei, O., Sulaiman, S., Fashina, A.B., Akande, F.B.
    MyJurnal
    The motion resistances of 660 mm pneumatic and rigid bicycle wheels of the same rim diameter were measured experimentally using the developed tractor-towed single non-lug narrow wheel motion resistance test rig for traction studies. The motion resistances measured were taken to be the towing forces determined in real time using Mecmesin Basic Force Gauge (BFG 2500). The test variables included two test surfaces [tilled and wet (mud) surfaces], the dynamic load and the towing velocity. The tyre inflation pressure of 414 kPa was chosen to make the surface synonymous with that of the rigid wheel. Motion resistance ratios of the two wheels were determined empirically and through semi-empirical approach. The motion resistances of the rigid wheel were found to be greater than those of the pneumatic wheel for both surfaces. Consequently, the motion resistance ratios of the rigid wheel were greater than those obtained
    from the pneumatic wheel. Analysis of variance showed that there were significant differences between the means of the motion resistance measured on the test surfaces, as well as between the two wheels and their interactions with the test surfaces. The motion resistance ratio exhibited a linear relationship with the towing velocity, while the relationship with the dynamic load was quadratic. However, such a relationship is either direct or inverse with the respective variables. The motion resistance ratio models for the pneumatic and rigid wheels showed that on different test conditions of the dynamic loads and the towing velocities, the relationships between the motion resistance ratio and the dynamic load, and motion resistance with dynamic load were also different.
    Matched MeSH terms: Pressure
  9. Mohd. Sapuan Salit, Mohamed Abd. Rahman, Khalina Abdan
    MyJurnal
    Vinyl esters combine the best of polyesters and epoxies in terms of properties and processing. Without
    complicating presence of reinforcing fibres, this study investigated the effects of catalyst amount, preheating time, molding temperature, and pressure on flexural and water absorption properties of cast vinyl ester (VE) using a factorial experiment. Longer preheating time enhanced the stiffness of VE, while higher molding pressure reduced the flexural modulus. All the four factors did not affect the flexural strength and elongation at the break of molded VE significantly. Using a high molding pressure also caused molded VE to have higher water absorption for a long water exposure period. Meanwhile, greater water absorption at bigger amount of catalyst and higher preheating temperature indicate possible interactions between these factors. The results suggest possible negative effects of high molding pressure through the increase in the network of micro-cracks, and thus lowering the integrity of cast VE sheets. Judicious selection of the process parameters was required in order to obtain good quality molded VE sheets and by extension fibre-reinforced VE composites. Molded VE-unsaturated polyester (UP) blend is a significantly different material which is 1.49 times stronger, 2.38 times more flexible, but it is 0.69 less stiff than neat VE and with significantly higher water absorption. The results obtained warrant for a further investigation in process optimization of VE molding and the use of VE-UP blend as a matrix for natural fibre-reinforced composites.
    Matched MeSH terms: Pressure
  10. Ghiasi, Vahed, Husaini Omar
    MyJurnal
    Shotcrete is a process where concrete is projected or “shot” under pressure, using a feeder or a
    “gun” onto a surface to form structural shapes including walls, floors, and roofs. The surface can
    be wood, steel, polystyrene, or any other surfaces that concrete can be projected onto. The surface
    can be trowel led smooth while the concrete is still wet. Shotcrete has high strength, durability, low
    permeability, excellent bond, and limitless shape possibilities. These properties allow shotcrete
    to be used as a structural material in most cases. Although the hardened properties of shotcrete
    are similar to conventional cast-in-place concrete, the nature of the placement process provides
    additional benefits, such as excellent bond with most substrates and instant or rapid capabilities,
    particularly on complex forms or shapes. In addition to building homes, shotcrete can also be used
    to build pools. The practice of underground tunneling shows that the degree of stability of tunnels
    is dependent on the state of the soil, rock mass, and shotcrete around the tunnel contour. The
    development in the urban or suburban areas leads to the construction of tunnels in all kinds of soil
    and rock. Meanwhile, the construction of tunnels in shallow depth or soft soils causes the ground
    to displace. The determination of soil and rock mechanical properties to assess the stability of New
    Austrian Tunnelling Method (NATM) tunnels and design the support system is one of the most
    important steps in tunnelling. This paper provides information pertaining to the safety and increase
    the stability of NATM tunnel before, during and after the operation of the tunnel. Therefore, the
    shotcrete process is a recognized method for cemented sandy silt stabilization, with the aid of high
    pressure shot concrete to increase the stability of tunnels.
    Matched MeSH terms: Pressure
  11. Rasif Mohd Zain, Roslan Yahya, Mohamad Rabaie Shari, Airwan Affandi Mahmood, Mior Ahmad Khusaini Adnan
    MyJurnal
    Many times a year natural gas transmission and distribution companies need to make new connections to pipelines to expand or modify their existing system through hot tapping procedure. This procedure involves the installation of a new pipeline connection while the pipeline remains in service, flowing natural gas under pressure. The hot tap procedure includes attaching a branch connection and valve on the outside of an operating pipeline, and then cutting out the pipe-line wall within the branch and removing the wall section, which is called object of coupon through the valve. During the hot tapping process a critical problems occurred when a coupon fell into the mother pipeline. To overcome this problem, a gamma-ray absorption technique was chosen whereby a mapping technique will be done to detect the coupon position. The technique is non-destructive as it applies Co-60 (5mCi) as a radioisotope sealed source to emit gamma radiation and a NaI(Tl) scintillation as detector. The result provided a visible representation of density profile inside pipeline where the coupon location can be located. This paper provides the detail of the technique used and presents the result obtained.
    Matched MeSH terms: Pressure
  12. Ahmad Rasdan Ismail, Mohd Afiq Zainal Rosli, Isa Halim, Baba Md. Deros, Mohd Nizam Ab Rahman, Md. Mustafizur Rahman
    MyJurnal
    The main purpose of this study was to establish the comfort zone for bus drivers in a seated position. In addition, this study is to investigate the seated pressure distribution among Malaysian bus drivers. The study consists of 10 bus drivers randomly selected to be a part of this study. The FSA pressure mat was utilized in order to investigate the force distribution of buttock to the seat pan of the drivers’ seat. This device is placed on the driver seat and backrest. Later, the subject would sit on for several minute. The finding reveals that most of the bus drivers feel discomfort by having low back pain and musculoskeletal disorder. The seat pressure distribution of Malaysian busses indicated that the seat not able to absorb high pressure generated from buttock that later may cause the discomfort and restricted the performance of drivers.
    Matched MeSH terms: Pressure
  13. Mustapha, I., Takriff, M.S., Kamaruddin, S.K., Hassan, N.M., Zain, R.M.
    MyJurnal
    Electrical capacitance tomography (ECT) velocimetry technique was utilized in this study to quantify the flow structure of gas-liquid based on the ECT images. A new 8 electrodes sensor ECT has been successfully developed to provide 2D images in a cross section of pipeline. The ECT has been attentively applied in the test section of the flow rig for imaging the gas-liquid distribution. The inside diameter of ECT pipeline sensor is 100mm. Meanwhile, the flow rig consists of close loop of “CPVC” pipes that includes a pipe test section, two tanks of oil and water respectively and allows the working pressure up to 5 bars. Transparent pipe is used for visual monitoring. A portable Doppler flow meter that utilizes the ultrasonic signal has also been placed at the test section to measure the velocity. The images obtained by ECT show that the different flow patterns have been observed in the horizontal pipe during the experiment. The technique enables realization of the time and position at which particle density fluctuations with respect to dominant time-space levels pass through the pipeline.
    Matched MeSH terms: Pressure
  14. Wan Fahmin Faiz Wan Ali, Mohd Fadhil Ain, Zainal Arifin Ahmad
    MyJurnal
    Triyttrium Pentairon (iii) Oxide (Y3Fe501,2) or familiar called as Yttrium Iron Garnet (YIG) is successfully prepared using a conventional mixed-oxide method of 5:3 Fe to Y ratios. YIG prepared from conventional mixed-oxide usually produced some associated phase which surely will affect electrical properties. In this study, various temperature used in the sintering process to induce associated phases (YIP) to be fully reacting to form single phase of YIG and the effect on resonance frequency is studied for resonator applications. The mixtures of oxide powders are calcined at 1100 "C and sintered at various temperatures of (1350, 1380, 1400, 1420 1450 QC, respectively). Cubic phase is detected from the formation of YIG. Some other phases such as YIP and hematite also present as secondary phase. However, it is seen that, based on the Rietvield refinement method, the total amount of secondary phase simulated are inversely proportional with sintering temperature. The powder was pressed into cylindrical pellet and tested as a microwave resonator in antenna application. It was found that, on the actual antenna circuit the operating frequencies measured are in the range of 10-12 GHz for all samples which suitable for X-band. At the end, overall radiation pattern for all samples exhibit an omnidirectional behavior.
    Matched MeSH terms: Pressure
  15. Sharifah Hanisah S.A. Aziz, Khairul Zaman Mohd Dahlan, Jalaluddin Harun
    MyJurnal
    At present, research in composite materials is being directed at using natural fibres instead of synthetic fibres. Kenaf which is extensively grown in the Far East including Malaysia, has been identified as a bast (stem) fibre with significant market potential. In this work, long and random kenaf fibres (non-woven mat form) were used in the as-received condition and alkalized with a 0.06M NaOH solution. They were combined with polypropylene thin sheets, sandwiched between layers of kenaf fibres and hot-pressed to form natural fibre composites. The mechanical properties of the composites were investigated to observe the effect of fibre alignment, fibre treatment and pre-irradiation method used. A general trend was observed whereby alkalized and long fibre composites gave higher flexural modulus and flexural strength compared with random mat and untreated fibres. The long fibre composites also gave a higher work of fracture. However, the correlation between fibre surface treatment and the work of fracture was less clear. Pre-irradiation on the polypropylene pellets and fibres before the composite is manufactured showed significant improvement on the flexural modulus and flexural strength. The bond performance test performed on the treated composites demonstrated good bonding and interfacial adhesion between the fibre and matrix. However, the method of moulding used need to be improved to optimize the performance of the composites.
    Matched MeSH terms: Pressure
  16. Mohamad Zaky Noh, Luay Bakir Hussain, Zainal Arifin Ahmad
    MyJurnal
    The joining of ceramic-metal could be done through a few techniques: brazing, diffusion bonding, friction welding etc. However, the mechanism of ceramic-metal joining was still not properly understood. In this study, alumina rod was bonded to mild steel rod via friction welding technique by using Al 1100 sheet as interlayer. The diameter of the rods was 10 mm. Friction pressure of 20 MPa and forging pressure of 40 MPa were used. Rotational speeds were maintained at 900 rpm and friction times of 2 to 20 seconds were applied. The joining strength was determined through four point bending test. The maximum bending strength, 240 MPa was obtained at the friction times of 20 seconds. Under optical microscope and SEM observation, the deformation of the aluminum interface was clearly obtained. Mechanical interlocking and close contact between the aluminaaluminum and aluminum-mild steel were observed at magnifications of 3000X. The strength of alumina-steel bonding is much dependent on the wettability of the alumina surface by the molten aluminum and the existing of mechanical interlocking between interlayer and sample materials.
    Matched MeSH terms: Pressure
  17. Hasmida, M.N., Liza, M. S., Nur Syukriah, A.R., Harisun, Y., Mohd Azizi, C. Y., Fadzilah Adibah, A. M.
    MyJurnal
    Quercus infectoria gall, which is known as manjakani in Malaysia, was traditionally used in treating diseases. The bioactive compounds from the galls can be extracted using various extraction methods. In this study, supercritical carbon dioxide (SC-CO2) extraction was used to study the effects of CO2 flow rate on the yield, total phenolic content and antioxidant activity of Q. infectoria extract by fixing the pressure and temperature at the highest density (P: 30 MPa, T: 40°C). The results were compared with those acquired from the Soxhlet extraction method. The results showed that the Soxhlet extraction had a higher percentage of extraction yield than SC-CO2 extraction. The selectivity of Q. infectoria extracts using SC-CO2 extraction was better than the Soxhlet extraction method. Meanwhile, the extraction efficiency using the SC-CO2 extraction ranged from 46% to 53%. The SC-CO2 extraction also yielded higher total phenolic content than using the Soxhlet extraction method when 2 mL/min of CO2 flow rate was applied (203.53 mg GA/g sample). This study also revealed that the extracts from the SC-CO2 extraction showed a better radical scavenging activity compared to the Soxhlet extraction when analysed using DPPH (2,2-diphenyl-1-picryl hydrazyl) radical scavenging activity assays.radical scavenging activity compared to the Soxhlet extraction when analysed using DPPH (2,2-diphenyl-1-picryl hydrazyl) radical scavenging activity assays.
    Matched MeSH terms: Pressure
  18. Hussain H. Al-Kayiem, Iylia Elena Abdul Jamil
    MyJurnal
    In the moving layer of particles with variable concentration, the shear estimation is not directly predictable and there is no existing clear mathematical or empirical formula to achieve this objective. This paper presents a developed approach to estimate the shear forces in a flow having suspended and moving layers of solid particles in liquid flow. The two-layer approach was taken whereby the flow consisting of one upper suspended layer of particles in the liquid, and the bottom layer was the moving bed of particles. In the present work, the method of finding the force acting on the pipe wall by the particles in the layer, termed as the ‘dry force’, was presented using a “pseudo hydrostatic pressure” method. To attain the equation for the dry force, a mathematical approach is taken with the assumptions that the flow is horizontal, two-phase pipe flow (solid in Newtonian liquid), incompressible and it is at steady-state. The analysis was conducted considering various particles densities, various concentrations in the suspended layer and different thicknesses of the moving bed. Changing the concentration in the suspended layer from 0.00001 up to 0.001 didn’t showed significant changes in the dry force evaluation. The dry friction force is increasing with increasing moving bed thickness. The developed mathematical model can be
    applicable in solving for the shear force in horizontal solid liquid two-phase flows.
    Matched MeSH terms: Hydrostatic Pressure
  19. Yapp JH, Kamil R, Rozi M, Mohtarrudin N, Loqman MY, Ezamin AR, et al.
    J Tissue Viability, 2017 Aug;26(3):196-201.
    PMID: 28438463 DOI: 10.1016/j.jtv.2017.03.002
    Tissue recovery is important in preventing tissue deterioration, which is induced by pressure and may lead to pressure ulcers (PU). Reactive hyperaemia (RH) is an indicator used to identify people at risk of PU. In this study, the effect of different recovery times on RH trend is investigated during repetitive loading. Twenty-one male Sprague-Dawley rats (seven per group), with body weight of 385-485 g, were categorised into three groups and subjected to different recovery times with three repetitive loading cycles. The first, second, and third groups were subjected to short (3 min), moderate (10 min), and prolonged (40 min) recovery, respectively, while fixed loading time and pressure (10 min and 50 mmHg, respectively). Peak hyperaemia was measured in the three cycles to determine trends associated with different recovery times. Three RH trends (increasing, decreasing, and inconsistent) were observed. As the recovery time is increased (3 min vs. 10 min vs. 40 min), the number of samples with increasing RH trend decreases (57% vs. 29% vs. 14%) and the number of samples with inconsistent RH trend increases (29% vs. 57% vs. 72%). All groups consists of one sample with decreasing RH trend (14%). Results confirm that different recovery times affect the RH trend during repetitive loading. The RH trend may be used to determine the sufficient recovery time of an individual to avoid PU development.
    Matched MeSH terms: Pressure Ulcer/prevention & control; Pressure/adverse effects
  20. Chiu CL, Jaais F, Wang CY
    Br J Anaesth, 1999 May;82(5):757-60.
    PMID: 10536557
    We have compared the effect of rocuronium and succinylcholine on intraocular pressure (IOP) during rapid sequence induction of anaesthesia using propofol and fentanyl, in a randomized double-blind study. We studied 30 adult patients, allocated to one of two groups. Anaesthesia was induced with fentanyl 2 micrograms kg-1 and propofol until loss of verbal response. This was followed by succinylcholine 1.5 mg kg-1 (group S; n = 15) or rocuronium 0.9 mg kg-1 (group R; n = 15). Laryngoscopy was performed 60 s later. IOP, mean arterial pressure (MAP) and heart rate (HR) were measured before induction, immediately before intubation and every minute after intubation for 5 min. A Keeler Pulsair air impulse tonometer was used to measure IOP and the mean of two readings obtained in the right eye at each measurement time was recorded. Intubating conditions were evaluated according to a simple scoring system. IOP in the succinylcholine group was significantly greater than that in the rocuronium group (mean 21.6 (SEM 1.4) mm Hg vs 13.3 (1.4) mm Hg; P < 0.001). Intubating conditions were equally good in both groups. We conclude that with rapid sequence induction of anaesthesia using propofol and fentanyl, rocuronium did not cause as great an increase in IOP as succinylcholine and may be an alternative in open eye injury cases.
    Matched MeSH terms: Blood Pressure/drug effects; Intraocular Pressure/drug effects*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links