Displaying publications 361 - 380 of 852 in total

Abstract:
Sort:
  1. Eliminating iodine deficiency in rural Sarawak, Malaysia: the relevance of water iodization
    Foo LC, Mahmud N, Satgunasingam N
    Am J Public Health, 1998 Apr;88(4):680-1.
    PMID: 9551019
    Matched MeSH terms: Sodium Chloride, Dietary*
  2. Analysis of paralytic shellfish poisoning toxin congeners by a sodium channel receptor binding assay
    Usup G, Leaw CP, Cheah MY, Ahmad A, Ng BK
    Toxicon, 2004 Jul;44(1):37-43.
    PMID: 15225560
    This study was carried out to characterize the detection and quantitation of several paralytic shellfish poisoning (PSP) toxin congeners using a receptor binding assay (RBA). This involved competitive binding of the toxin congeners against tritium-labeled STX for receptor sites on rat brain sodium channels. Competitive binding curves were described by a four-parameter logistic equation. Half-saturation values (EC(50)) ranged from 4.38 nM for STX to 142 nM for GTX5. Receptor binding affinity was in the order STX>GTX1/4>neoSTX>GTX2/3>dcSTX>GTX5, and this was similar to the order of mouse toxicity of these congeners. Predicted toxin concentrations from observed STXeq values and EC(50) ratios relative to STX were within 20% or better of the actual concentrations used in the assay. In contrast predicted toxin concentrations using mouse toxicity ratios relative to STX did not provide a good match to actual concentrations, except for GTX1/4. This study has shown that the rat brain sodium channel RBA will provide a reliable integration of total toxicity of various PSP toxin congeners present in a sample.
    Matched MeSH terms: Sodium Channels/metabolism*
  3. Effects of fasting during Ramadan on urinary excretion in Malaysian Muslims
    Cheah SH, Ch'ng SL, Husain R, Duncan MT
    Br J Nutr, 1990 Mar;63(2):329-37.
    PMID: 2334668
    Urine analysis was conducted on male Muslims before, during and after Ramadan. Various changes in urine volume, osmolality, total solute, sodium, potassium, titratable acidity and urea in response to altered feeding and activity regimens were found. There were no detectable levels of ketones, protein, glucose, urobilinogen and haemoglobin. It was concluded that the body adapted to fasting during Ramadan and that there were no adverse effects on renal function.
    Matched MeSH terms: Sodium/urine
  4. Dental abrasion pattern in a selected group of Malaysians
    Yaacob HB, Park AW
    J Nihon Univ Sch Dent, 1990 Sep;32(3):175-80.
    PMID: 2230960
    Among 350 inhabitants of two villages, 31 (8.9%) cleaned their teeth using table salt and charcoal applied to their forefinger or a Melastoma brush. As a result, all had distinct forms of abrasion cavity on the labial surfaces of their teeth. All of the above three agents are highly abrasive and injurious to both the hard and soft oral tissues. This dying practice is only popular among a very small number of persons in the older age group, and should be discouraged.
    Matched MeSH terms: Sodium Chloride/adverse effects
  5. Effectiveness of ultrasonic files in the disruption of root canal bacteria
    Ahmad M, Pitt Ford TR, Crum LA, Wilson RF
    Oral Surg. Oral Med. Oral Pathol., 1990 Sep;70(3):328-32.
    PMID: 2216361
    The physical mechanisms of ultrasound, namely cavitation and acoustic streaming, generated by the Enac-Osada ultrasonic unit were investigated for effectiveness in disrupting Streptococcus mitis. In addition, the bactericidal effect of ultrasound in the presence of 2.5% sodium hypochlorite was examined. Bacterial suspensions were irradiated directly with ultrasound in simulated root canals, and the viability of bacteria was examined after growth on a blood agar medium under anaerobic conditions at 37 degrees C for 5 days. The results indicated that ultrasound per se failed to disrupt bacteria but resulted in increases in the viable counts; the former was considered to be because of the lack of cavitation and the latter because of the dispersal effects of acoustic streaming. The 2.5% sodium hypochlorite solution demonstrated powerful bactericidal activity.
    Matched MeSH terms: Sodium Hypochlorite/pharmacology
  6. Fulltext Brain death: rapid evaluation using computerized radionuclide cerebral flow study
    Paramsothy M, Ong GSY, Wong BH, Loh TG, Delilkan AE
    Med J Malaysia, 1986 Sep;41(3):189-97.
    PMID: 2823083
    Demonstration of arrested intracerebral blood flow is the ultimate evidence of brain death. Computerized radionuclide cerebral flow study was done on 18 patients diagnosed clinically as brain dead. Correlation was made with clinical neurophysiological and EEG findings. The criteria for diagnosis of arrested intracerebral perfusion using radionuclide flow study were: non-visualization of blood flow activity in the intracranial arteries during the arterial phase, diffused cerebral activity during the capillary phase and non-filling of venous sinuses during the venous phase; visualization of typical 'hot nasal' activity; the time activity curve over the cerebral hemispheres lacks a bolus effect and instead shows a delayed gradual rise of activity. These features are pathognomonic of brain tamponade.
    Arrested intracranial circulation was seen in 16 patients (ten had electrocerebral silence; one had extremely abnormal EEG with small voltage activity and five had no EEG done). In the remaining two patients, some cerebral blood flow was demonstrated (one had no definite cerebral activity and the other had diffused EEG activity).
    Radionuclide cerebral flow study is a very sensitive, accurate, safe, simple, rapid and non-invasive modality in confirming brain death and is especially useful in patients on "brain-protection" regime, in hypothermia or in certain metabolic states where diagnosis based on clinical and EEG criteria is difficult. EEG need not be a required procedure once brain death is established by the demonstration of arrested intracranial circulation.
    Matched MeSH terms: Sodium Pertechnetate Tc 99m*
  7. The effects of newborn calf serum and foetal bovine serum on the Na+ + K+-activated adenosine triphosphatase activity in 3T3 and SV3T3 cells grown to confluency
    Tenang EM, McCaldin B
    Biochem. Int., 1988 Feb;16(2):193-8.
    PMID: 2835046
    The effects of cell density and growth in 10% foetal bovine serum and 10% newborn calf serum on the activity of the enzyme (Na+ + K+)-ATPase were studied in 3T3 and SV3T3 cells. The enzyme activity decreases in 3T3 cells grown in foetal bovine serum as the cells approach confluency while in those grown in newborn calf serum the enzyme activity increases. The (Na+ + K+)-ATPase activity does not change with increase in cell density in SV3T3 cells grown in foetal bovine serum while the enzyme activity in those grown in newborn calf serum increases with increase in cells density up to about 1.35 x 10(5) cells/sq. cm. and then decreases with further increase in cell number. At confluency it was found that the enzyme activity is higher in the SV3T3 as compared to the 3T3 cells when the cells were grown in 10% foetal bovine serum, whereas in those grown in 10% newborn calf serum the enzyme activity is higher in the 3T3 as compared to the SV3T3 cells.
    Matched MeSH terms: Sodium-Potassium-Exchanging ATPase/metabolism*
  8. Fulltext A randomized cross-over study comparing the performance of HD integra™ central concentrate system versus pre-produced concentrate in hemodialysis
    Fauziah K, Go KW, Ghazali A, Zaki M, Lim TO
    BMC Nephrol, 2017 Apr 03;18(1):123.
    PMID: 28372556 DOI: 10.1186/s12882-017-0537-2
    BACKGROUND: Pre-produced bicarbonate concentrates (PPC) are still widely used in developing countries despite its cost and risk but Central Concentrate System (CCS) is lacking in data to support its wider adoption.

    METHODS: We conducted an 8-week randomized crossover study on 16 Hemodialysis machines to compare CCS versus PPC. Performance is assessed by solute concentrations while safety is assessed by microbial count, endotoxin level and adverse event reporting.

    RESULTS: Microbial counts and endotoxin levels were monitored on 48 occasions during the 8-week study for the CCS arm of the study. The levels were all below the action limit during the study. No patient reported any adverse events. Dialysate Sodium, Chloride and Bicarbonate concentrations were measured on a total of 128 occasions for each arm of the study. The relative deviations of Sodium, Chloride and Bicarbonate concentration were within ±5% of their nominal values for both. The 95% Confidence Intervals for the ratio of the mean solute concentrations on the CCS to PPC lie within the tolerance limit of ±5%.

    CONCLUSION: Modern CCS is bacteriologically safe and its performance statistically equivalent to PPC.

    Matched MeSH terms: Sodium/analysis
  9. Effect of volume of porogens on the porosity of PLGA scaffolds in pH-controlled environment
    Gupta M, Aina A, Boukari Y, Doughty S, Morris A, Billa N
    Pharm Dev Technol, 2018 Feb;23(2):207-210.
    PMID: 28290217 DOI: 10.1080/10837450.2017.1304415
    Poly(lactic-co-glycolic acid) (PLGA) is a well-studied biodegradable polymer used in drug delivery and other medical applications such as in tissue regeneration. It is often necessary to impart porosity within the scaffold (microparticles) in order to promote the growth of tissue during the regeneration process. Sodium chloride and ammonium bicarbonate have been extensively used as porogens in the generation of porous microstructure. In this study, we compared the effect of volumes (250 μl, 500 μl and 750 μl) of two porogens, sodium chloride (1.71 M) and ammonium bicarbonate (1.71 M), on the porosity of PLGA microparticles.
    Matched MeSH terms: Sodium Chloride/chemistry
  10. Recovery of lignin peroxidase from submerged liquid fermentation of Amauroderma rugosum (Blume & T. Nees) Torrend using polyethylene glycol/salt aqueous two-phase system
    Jong WYL, Show PL, Ling TC, Tan YS
    J Biosci Bioeng, 2017 Jul;124(1):91-98.
    PMID: 28319022 DOI: 10.1016/j.jbiosc.2017.02.008
    Amauroderma rugosum is a wild mushroom species widely distributed in tropics and is classified under the class of Basidiomycetes. Basidiomycetes are well-known for their abilities of producing lignocellulolytic enzymes such as lignin peroxidase (LiP), laccase (Lac) and manganese peroxidase (MnP). Different factors such as nutrient sources, incubation period and agitation affect the production of lignocellulolytic enzymes. The A. rugosum produced LiP in the medium supplemented with potato dextrose broth (PDB), 0.5% yeast and 1.0% saw dust at 26.70±3.31 U/mL. However, the LiP activity was increased to 106.32±5.32 U/mL when supplemented with 150 μm of copper (CuSO4). The aqueous two-phase system (ATPS) is a simple, rapid and low cost method for primary extraction and recovery of LiP. A total of 25 systems made from five different molecular weights of polyethylene glycol (PEG)/dipotassium hydrogen phosphate (K2HPO4) were tested. PEG 600 produced the highest top phase purification factor (PFT) of 1.33±0.62 with yield of 72.18±8.50%. The optimization of the ATPS parameters, such as volume ratio VR, pH and crude enzyme loading are the factors controlling the phase partition. Our results showed that significant improvement (PFT of 6.26±2.87 with yield of 87.31±3.14%) of LiP recovery can be achieved by optimized the parameters.
    Matched MeSH terms: Sodium Chloride/chemistry
  11. Fulltext Effects of germination conditions on 5'-phosphodiesterase activity of selected seeds
    Pui, L.P., Abdulkarim, S.M., Ghazali, H.M.
    International Food Research Journal, 2012;19(4):1641-1648.
    MyJurnal
    5'-Phosphodiesterase (5'-PDE) is an enzyme that hydrolyses RNA to form 5'-inosine monophosphate (5'-IMP) and 5'-guanosine monophosphate (5'-GMP), which function as flavour enhancers. Selection of the best producer of 5'-PDE was made by determining the activity of the enzyme in six seeds that have been germinated, namely mung bean (Vigna radiate), soybean (Glycine max), adzuki/red bean (Vigna angularis L.), chick pea (Cicer arietinum), black eye pea (Vigna unguiculata) and petai (Parkia speciosa). Seeds that were not germinated acted as the control. In order to ensure there is no contamination from potential 5'-PDE-producing microorganisms during germination, microbial growth was reduced by using different surface sterilizing treatments where the seeds were soaked in 100 mL solution containing different concentrations of sodium hypochlorite (with or without 0.05% sodium azide) for 5 minutes before rinsing it five times with sterilized distilled water (total 500 mL). The seeds were observed every day for 3 days and the best surface sterilizing treatment was selected based on absence of mold growth and the effects on hypocotyl length. Sodium hypochlorite at 0.3% (v/v) concentration was able to inhibit mold growth in adzuki bean, soybean and chickpea. On the other hand, only 0.1% (v/v) sodium hypochlorite was needed to inhibit mold growth in black eye pea and petai, while mung bean required 0.05% (v/v) sodium hypochlorite to inhibit mold growth. Under these conditions, the growth of hypocotyl (hypocotyls length) was only slightly affected compared to the control. 5'-PDE was extracted from seeds that have been germinated for 24 hours and their control (ungerminated seeds) by homogenization in a blender with 400 mL of 50 mM acetate buffer, pH 4.5. After that, the homogenates were stirred for 30 min and the centrifuged at 9000 rpm for 15 min at 10°C. 5'-PDE activity was determined using thymidine 5'-monophosphate p-nitrophenyl ester as substrate at pH 7.0 and 55°C. The formation of nucleotide monophosphates, the products of reaction, was determined at 405 nm. As a strong presence of phosphomonoesterase (PME) will reduce the yield of nucleotide monophosphates as the enzyme hydrolyzes these products into nucleosides and orthophosphate, PME activity was also determined using p-nitrophenyl phosphate as the substrate at 60°C and pH 5.0. Thus, the seed with the highest 5'-PDE activity and a low PME activity can be selected. Germinated adzuki bean was found to have the highest 5'-PDE activity (0.59 µmol p-nitrophenol/min/mg protein) among the germinated seeds. A time-course study indicated that the level of 5'-PDE in adzuki bean increased with time of germination until 15 hours (0.69 µmol p-nitrophenol/min/mg protein), after which the acitivity decreased until it reached the basal level (0.44 µmol p-nitrophenol/min/mg protein) at 72 hours. On the other hand, PME in the bean was the highest at 9 h germination (0.98 µmol p-nitrophenol/min/mg protein). In general, controls have very low basal level of 5'-PDE activity (0.18- 0.42 µmol p-nitrophenol/min/mg protein).
    Matched MeSH terms: Sodium Hypochlorite; Sodium Azide
  12. Fulltext Formulation of aerosol concentrates containing haruan (Channa striatus) for wound dressing
    Febriyenti, Azmin Mohd. Noor, Saringat Baei
    Malaysian Journal of Pharmaceutical Science, 2008;6(1):43-58.
    MyJurnal
    The objective of this research was to formulate an aerosol concentrate containing haruan (Channa
    striatus) water extract that would produce a thin film when sprayed onto a wound and could be used for wound dressing. The aerosol concentrates were formulated with various polymer and plasticiser mixtures and tested in dispersion systems. The polymers evaluated were hydroxypropyl methylcellulose (HPMC), carboxymethylcellulose sodium (CMC Sodium), acacia, tragacanth, chitosan, gelatine and gelatine (bloom 151–160), all at concentrations of 2%. The plasticisers evaluated were polyethylene glycol (PEG) 400 and 4000, glycerine, propylene glycol, and triacetin. Films were prepared from film-forming dispersions by casting techniques. Film-forming dispersions were characterised in terms of pH, density, surface tension, rheological properties, particle size distribution, and tackiness. Based on these evaluations, HPMC was chosen as the best polymer. It produced a film with the expected qualities and was easy to reproduce in the form of dispersions or as thin transparent films. Glycerine was judged as the most appropriate plasticiser because it produced the concentrate having the desired qualities and properties expected from an aerosol concentrate.
    Matched MeSH terms: Carboxymethylcellulose Sodium; Sodium
  13. Fulltext Synthesis of silica fine particle by the addition of a non-ionic surfactant
    Mohd Nazri Idris, Hazizan Md. Akil, Zainal Arifin Ahmad
    Journal of Nuclear and Related Technologies, 2007;2005(1):29-33.
    MyJurnal
    Sodium silicate was used to synthesize silica fine particles at room temperature using non-ionic surfactant of triethanolamine (TEA), dissolution salt and precipitating agent. The experiments were conducted by different composition of precursor material, nonionic surfactant and dissolution salt concentrations through the sol-gel process. Various particle sizes in the range 100-300nm were synthesized. The particle size of silica powders were analyzed via Field Emission Scanning Electron Microscope (FESEM), Energy Dispersive X-ray Analysis (EDAX), X-Ray Fluorescence (XRF), and Fourier Transformation Infrared (FTIR). The result has demonstrated that the particle size can be controlled by changing the ratio of non-ionic surfactant and dissolution salt or the sodium silicate concentration.
    Matched MeSH terms: Sodium Chloride; Sodium Chloride, Dietary
  14. Fulltext Electrical conductivity of anionic surfactant-doped polypyrrole nanoparticles prepared via emulsion polymerization
    Ghalib, H., Abdullah, I., Daik, R.
    Pertanika Journal of Science & Technology, 2013;21(2):459-472.
    MyJurnal
    Conducting polypyrrole (PPy) nanoparticles were synthesized by chemical oxidative polymerization of pyrrole in aqueous solution containing ferric sulfate (Fe2(SO4)3), anionic surfactants (sodium dodecylbenzene-sulfonate (NaDBS) or sodium dodecyl sulfate (SDS)), 1-pentanol as the oxidant, dopant and co-emulsifier, respectively. The polymerization was carried out at 0 ºC and 25 ºC. Fourier transform infrared spectroscopy (FTIR) and elemental analysis indicated that anionic surfactants were successfully incorporated into the PPy backbone. Incorporation of anionic surfactants caused enhanced electrical conductivity, increased yield, decreased the size of particles as well as improved the thermal stability of the resultant PPy. The presence of anionic surfactant seems to inhibit undesirable side reactions so as to improve the regularity of the PPy backbone. Globular PPy particles were obtained with diameter ranged from 40 to 118 nm as revealed by field emission scanning electron microscopy (FE-SEM) and conductivity of 7.89×10-4 –2.35×10-2 S cm-1, as measured using impedance analyzer. It was found that polymerization at low temperature (0 ºC) produced PPy particles with smaller size and higher conductivity. The sodium dodecyl sulfate-doped PPy (SDS-doped PPy) exhibited higher conductivity than that of the sodium dodecylbenzenesulfonate-doped PPy (NaDBS-doped PPy), due to the bulkiness of NaDBS as compared to SDS.
    Matched MeSH terms: Sodium; Sodium Dodecyl Sulfate
  15. The syndrome of hyperosmolar non-ketotic diabetic acidosis following craniotomy: a case report
    Arumugasamy N, Siqueira EB
    Med J Malaya, 1970 Dec;25(2):155-60.
    PMID: 4251137
    Matched MeSH terms: Sodium/blood
  16. Fulltext Body composition and nutritional habits among first year medical students in a Malaysian public university
    Narimah AHH, Adlina S, Hakimi ZA
    Malaysian Journal of Public Health Medicine, 2007;7(1):52-55.
    MyJurnal
    Various studies have reported that excess body weight may increase the risk to various diseases and death. A study reported that adolescents who were overweight were almost 18 times more likely than their leaner peers to be obese in early adulthood and were 8.5 times more likely to have hypertension as young adults. Therefore, this study was conducted to determine the body composition and four dietary factors i.e., prudent diet habits, calorie control habits, dietary fat/ cholesterol and sodium/salt control which may affect blood pressure and the risk of heart disease among year 1 medical students in a public university in Selangor. Body composition was determined by measuring the body mass index (BMI) and body fat percentage. None of the female students showed excellent/good eating habits while majority were fair (37.7%) and poor/very poor (62.3%). Nearly half of the male students showed excellent/good eating habits (42.5%), but more than half (57.5%) were poor/very poor. Majority of the female (85.7%, 85.7% and 94.8% respectively) and male students (80.9%, 57.5% and 93.6% respectively) showed excellent/good eating habits in calorie, dietary fat and salt control. Majority of the students (64.9% female and 61.7% male) have normal BMI values while 24.7% of female and 10.6% of male students were underweight (BMI values less than 18.5). Only a small number of female students were overweight (5.2%) and obese (5.2%). However 14.9% of male students were overweight and another 12.8% were obese.
    Matched MeSH terms: Sodium, Dietary*
  17. Mesoporous-activated carbon prepared from chitosan flakes via single-step sodium hydroxide activation for the adsorption of methylene blue
    Marrakchi F, Ahmed MJ, Khanday WA, Asif M, Hameed BH
    Int J Biol Macromol, 2017 May;98:233-239.
    PMID: 28147233 DOI: 10.1016/j.ijbiomac.2017.01.119
    In this work, mesoporous-activated carbon (CSAC) was prepared from chitosan flakes (CS) via single-step sodium hydroxide activation for the adsorption of methylene blue (MB). CSAC was prepared using different impregnation ratios of NaOH:CS (1:1, 2:1, 3:1, and 4:1) at 800°C for 90min. The adsorption performance of CSAC was evaluated for MB at different adsorption variables, such MB initial concentrations (25-400mg/L), solution pH (3-11), and temperature (30-50°C). The adsorption isotherm data of CSAC-MB were well fitted to Langmuir model with a maximum adsorption capacity 143.53mg/g at 50°C. Best representation of kinetic data was obtained by the pseudo-second order model. CSAC exhibited excellent adsorption uptake for MB and can potentially be used for other cationic dyes.
    Matched MeSH terms: Sodium Hydroxide/chemistry*
  18. Effects of electric potential, NaCl, pH and distance between electrodes on efficiency of electrolysis in landfill leachate treatment
    Erabee IK, Ahsan A, Jose B, Arunkumar T, Sathyamurthy R, Idrus S, et al.
    J Environ Sci Health A Tox Hazard Subst Environ Eng, 2017 Jul 03;52(8):735-741.
    PMID: 28471297 DOI: 10.1080/10934529.2017.1303309
    This study investigated the effects of different parameters on the removal efficiencies of organic and inorganic pollutants in landfill leachate treatment by electrolysis. Different parameters were considered such as the electric potential (e.g., 24, 40 and 60 V), hydraulic retention time (HRT) (e.g., 40, 60, 80, 100 and 120 min), sodium chloride (NaCl) concentration (e.g., 1, 3, 5 and 7%), pH (e.g., 3, 7 and 9), electrodes materials [e.g., aluminum (Al) and iron (Fe)] and distance between electrodes (e.g., 1, 2 and 3 cm). The best operational condition of electrolysis was then recommended. The electric potential of 60 V with HRT of 120 min at 5% of NaCl solution using Al as anode and Fe as cathode (kept at a distance of 3 cm) was the most efficient condition which increased the removal efficiencies of various parameters such as turbidity, salinity, total suspended solids (TSS), total dissolved solids (TDS), biochemical oxygen demand (BOD), chemical oxygen demand (COD) and heavy metals (e.g., Zn and Mn). The higher removal percentages of many parameters, especially COD (94%) and Mn (93%) indicated that the electrolysis is an efficient technique for multi-pollutants (e.g., organic, inorganic and heavy metals) removal from the landfill leachate.
    Matched MeSH terms: Sodium Chloride/chemistry*
  19. Estimates of mineral intakes using food composition tables vs measures by inductively-coupled plasma mass spectrometry: Part 2: sodium, potassium, magnesium, copper, zinc
    Shimbo S, Zhang ZW, Miyake K, Watanabe T, Nakatsuka H, Matsuda-Inoguchi N, et al.
    Eur J Clin Nutr, 1999 Mar;53(3):233-8.
    PMID: 10201806
    To examine the accuracy of food composition table (FCT)-based estimation of dietary nutrient element intake in reference to the instrumental measurement by inductively-coupled plasma mass spectrometry (ICP-MS), as an extension of the first part of this study.
    Matched MeSH terms: Sodium/administration & dosage*
  20. Mixed polymer coating for modified release from coated spheroids
    Tan YT, Heng PW, Wan LS
    Pharm Dev Technol, 1999;4(4):561-70.
    PMID: 10578511
    Modified-release drug spheroids coated with an aqueous mixture of high-viscosity hydroxypropylmethylcellulose (HPMC) and sodium carboxymethylcellulose (NaCMC) were formulated. The preparation of core drug spheroids and the coating procedures were performed using the rotary processor and a bottom-spray fluidized bed, respectively. Dissolution studies indicated that incorporation of suitable additives, such as poly(vinylpyrrolidone) (PVP) and poly(ethylene glycol) 400 (PEG) improved the flexibility and integrity of the coat layer by retarding the drug release. An increase in coating levels applied generally retarded the release rate of the drug. However, the ratio of HPMC to NaCMC in the mixed, plasticized polymeric coat played a more dominant role in determining the dissolution T50% values. The optimal ratio of HPMC to NaCMC for prolonged drug release was found to be 3:1, whereas an increase in the amount of NaCMC in the mixed polymer coat only increased drug release. The synergistic viscosity effect of HPMC and NaCMC in retarding drug release rate was greater in distilled water than in dissolution media of pH 1 and 7.2. Cross-sectional view of the scanning electron micrograph showed that all of the coated spheroids exhibited a well-fused, continuous, and distinct layer of coating film. The drug release kinetics followed a biexponential first-order kinetic model.
    Matched MeSH terms: Carboxymethylcellulose Sodium*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links