The studies on municipal solid waste (MSW) management in Pakistan and its impacts on greenhouse gas (GHG) emissions are glaringly missing. Therefore, this study examines the effect of MSW management on GHG emissions in Pakistan and suggests the best suitable strategies for alleviating GHG emissions. The Intergovernmental Panel on Climate Change (IPCC) 2006 waste model (WM) was used to create inventory of GHG emissions from landfilling. The solid waste management GHG (SWM-GHG) calculator and strengths-weaknesses-opportunities-threat (SWOT) analyses were used as strategic planning tools to reduce GHG emissions by improving MSW management in Pakistan. The IPCC 2006 WM estimated 14,987,113 metric tonnes (Mt) carbon dioxide equivalents (CO2-eq) of GHG emissions in 2016. The SWM-GHG calculator, on the other hand, estimated 23,319,370 Mt CO2-eq of GHG emissions from management of 30,764,000 Mt of MSW in 2016, which included 8% recycling, 2% composting, and 90% disposal in open dumps. To reduce GHG emissions, two strategies including recycling-focused and incineration-focused were analysed. The recycling approach can reduce more GHG emissions than incineration, as it can reduce 36% of GHG emissions (as compared to GHG emission in 2016) by recycling 23% of MSW, anaerobically digesting 10% of MSW, and disposing of 67% of MSW in sanitary landfills (with energy recovery). Moreover, the SWOT analysis suggested integration of the informal sector, adoption of anaerobic digestion and formulation of explicit MSW regulations for improving the current management of MSW which will also result in lower GHG emissions.
The present study intends to evaluate the potential of co-digestion for utilizing Organic fraction of Municipal Solid Waste (OFMSW) and sewage sludge (SS) for enhanced biogas production. Metagenomic analysis was performed to identify the dominant bacteria, archaea and fungi, changes in their communities with time and their functional roles during the course of anaerobic digestion (AD). The cumulative biogas yield of 586.2 mL biogas/gVS with the highest methane concentration of 69.5% was observed under an optimum ratio of OFMSW:SS (40:60 w/w). Bacteria and fungi were found to be majorly involved in hydrolysis and initial stages of AD. Probably, the most common archaea Methanosarsina sp. primarily followed the acetoclastic pathway. The hydrogenotrophic pathway was less followed as indicated by the reduction in abundance of syntrophic acetate oxidizers. An adequate understanding of microbial communities is important to manipulate and inoculate the specific microbial consortia to maximize CH4 production through AD.
Due to its increasing demands for fossil fuels, Indonesia needs an alternative energy to diversify its energy supply. Landfill gas (LFG), which key component is methane (CH4), has become one of the most attractive options to sustain its continued economic development. This exploratory study seeks to demonstrate the added value of landfilled municipal solid waste (MSW) in generating sustainable energy, resulting from CH4 emissions in the Bantargebang landfill (Jakarta). The power generation capacity of a waste-to-energy (WTE) plant based on a mathematical modeling was investigated. This article critically evaluated the production of electricity and potential income from its sale in the market. The project's environmental impact assessment and its socio-economic and environmental benefits in terms of quantitative and qualitative aspects were discussed. It was found that the emitted CH4 from the landfill could be reduced by 25,000 Mt annually, while its electricity generation could reach one million kW ⋅h annually, savings on equivalent electricity charge worth US$ 112 million/year (based on US' 8/kW ⋅ h). An equivalent CO2 mitigation of 3.4 × 106 Mt/year was obtained. The income from its power sale were US$ 1.2 ×106 in the 1st year and 7.7 ×107US$ in the 15th year, respectively, based on the projected CH4 and power generation. The modeling study on the Bantargebang landfill using the LFG extraction data indicated that the LFG production ranged from 0.05 to 0.40 m3 per kg of the landfilled MSW. The LFG could generate electricity as low as US' 8 per kW ⋅ h. With respect to the implications of this study, the revenue not only defrays the cost of landfill's operations and maintenance (O&M), but also provides an incentive and means to further improve its design and operations. Overall, this work not only leads to a diversification of primary energy, but also improves environmental protection and the living standard of the people surrounding the plant.
In this study, municipal solid waste incineration fly ash (MSWIFA) was pretreated with CO2 via slurry carbonation (SC) and dry carbonation coupled with subsequent water washing (DCW). Both the treated MSWIFAs were then used as cement replacement in cement pastes by weight of 10%, 20% and 30% to investigate the influence on hydration mechanisms, physico-mechanical characteristics and leaching properties. The results showed that carbonates formed on the surface of SC-MSWIFA particles were finer (primarily 20-50 nm calcite) than those from the corresponding DCW-MSWIFA (mostly 130-200 nm vaterite). Hence, SC-MSWIFA blended cement pastes led to shorter setting time and higher early compressive strength than the DCW-MSWIFA pastes. In contrast, the presence of vaterite-rich DCW-MSWIFA in the blended cement pastes could accelerate the cement hydration after 24 h. Both the CO2-pretreated MSWIFA can replace cement up to 30% without sacrificing the long-term strength and mechanical properties of cement pastes, demonstrating excellent performance as a supplementary cementitious material. Moreover, volume stability in terms of expansion and lead leaching of CO2-pretreated MSWIFA cement pastes were far below the regulatory limits.
Solid waste generation has rapidly increased due to the worldwide population, urbanization, and industrialization. Solid waste management (SWM) is a significant challenge for a society that arises local issues with global consequences. Thus, solid waste management strategies to recycle waste products are promising practices that positively impact sustainable goals. Several developed countries possess excellent solid waste management strategies to recycle waste products. Developing countries face many challenges, such as municipal solid waste (MSW) sorting and handling due to high population density and economic instability. This mismanagement could further expedite harmful environmental and socioeconomic concerns. This review discusses the current solid waste management and energy recovery production in developing countries; with statistics, this review provides a comprehensive revision on energy recovery technologies such as the thermochemical and biochemical conversion of waste with economic considerations. Furthermore, the paper discusses the challenges of SWM in developing countries, including several immediate actions and future policy recommendations for improving the current status of SWM via harnessing technology. This review has the potential of helping municipalities, government authorities, researchers, and stakeholders working on MSW management to make effective decisions for improved SWM for achieving sustainable development.
Waste collection widely depends on the route optimization problem that involves a large amount of expenditure in terms of capital, labor, and variable operational costs. Thus, the more waste collection route is optimized, the more reduction in different costs and environmental effect will be. This study proposes a modified particle swarm optimization (PSO) algorithm in a capacitated vehicle-routing problem (CVRP) model to determine the best waste collection and route optimization solutions. In this study, threshold waste level (TWL) and scheduling concepts are applied in the PSO-based CVRP model under different datasets. The obtained results from different datasets show that the proposed algorithmic CVRP model provides the best waste collection and route optimization in terms of travel distance, total waste, waste collection efficiency, and tightness at 70-75% of TWL. The obtained results for 1 week scheduling show that 70% of TWL performs better than all node consideration in terms of collected waste, distance, tightness, efficiency, fuel consumption, and cost. The proposed optimized model can serve as a valuable tool for waste collection and route optimization toward reducing socioeconomic and environmental impacts.
The conversion of starchy sago (Metroxylon sagu) pith waste (SPW), a lignocellulosic biomass waste, to fermentable sugars under mild conditions had been successfully demonstrated. The optimum depolymerization of SPW was achieved at 2 wt% sample loading which was catalyzed by 100 mM of oxalic acid in the presence of 25 wt% NaCl solution at 110 °C for 3 h. Up to 97% SPW sample was being converted into fermentable sugars with limited formation of by-products after two sequential depolymerization cycles. Both reaction temperature and concentration of oxalic acid were crucial parameters for the depolymerization of SPW which exhibited a high selectivity for the production of glucose over other reducing sugars.
The world has been grappling with the crisis of the COVID-19 pandemic for more than a year. Various sectors have been affected by COVID-19 and its consequences. The waste management system is one of the sectors affected by such unpredictable pandemics. The experience of COVID-19 proved that adaptability to such pandemics and the post-pandemic era had become a necessity in waste management systems and this requires an accurate understanding of the challenges that have been arising. The accurate information and data from most countries severely affected by the pandemic are not still available to identify the key challenges during and post-COVID-19. The documented evidence from literature has been collected, and the attempt has been made to summarize the rising challenges and the lessons learned. This review covers all raised challenges concerning the various aspects of the waste management system from generation to final disposal (i.e., generation, storage, collection, transportation, processing, and burial of waste). The necessities and opportunities are recognized for increasing flexibility and adaptability in waste management systems. The four basic pillars are enumerated to adapt the waste management system to the COVID-19 pandemic and post-COVID-19 conditions. Striving to support and implement a circular economy is one of its basic strategies.
Polycyclic aromatic hydrocharbons (PAHs) are a class of highly toxic pollutants that are highly detrimental to the ecosystem. Landfill leechate emanated from municipal solid waste are reported to constitute significant PAHs. In the present investigation, three Fenton proceses, namely conventional Fenton, photo-fenton and electro-fenton methods have been employed to treat landfill leehcate for removing PAHs from a waste dumpig yard. Response surface methodology (RSM) and artificial neural network (ANN) methodologies were adopted to optimize and validate the conditions for optimum oxidative removal of COD and PAHs. The statistical analysis results showed that all independent variables chosen in the study are reported to have significant influence of the removal effects with P-values <0.05. Sensitivity analysis by the developed ANN model showed that the pH had the highest significance of 1.89 in PAH removal when compared to the other parameters. However for COD removal, H2O2 had the highest relative importance of 1.15, followed by Fe2+ and pH. Under optimal treatment conditions, the photo-fenton and electro-fenton processes showed better removal of COD and PAH compared to the Fenton process. The photo-fenton and electro-fenton treatment processes removed 85.32% and 74.64% of COD and 93.25% and 81.65% of PAHs, respectively. Also the investigations revelaed the presence of 16 distinct PAH compunds and the removal percentage of each of these PAHs are also reported. The PAH treatment research studies are generally limited to the assay of removal of PAH and COD levels. In the present investigation, in addition to the treatment of landfill leachate, particle size distribution analysis and elemental characterization of the resultant iron sludge by FESEM and EDX are reported. It was revealed that elemental oxygen is present in highest percentage, followed by iron, sulphur, sodium, chlorine, carbon and potassium. However, iron percentage can be reduced by treating the Fenton-treated sample with NaOH.
This review provides the history and current paradigms of waste management (WM) practices in developing nations during the last five decades. It explores the evolution of the challenges, complexities, and trends during this period. This paper, for the first time, presents an estimation of the amount of municipal solid waste (MSW) generated in developing nations in the last five decades based on the material flow analysis approach. Overall, the amount of MSW in developing countries has increased from about 0.64 billion Mt in 1970 to 2 billion Mt in 2019. This review demonstrates the importance of finding new WM approaches in developing nations in the context of formulating policies, strategies, and highlights the major trends that re-define WM in developing countries. It also aims to present the holistic changes in technology, economic and environmental feasibility aspects to attain an integrated sustainable WM system in developing countries. Specific focus on open-burning, open-dumping, informal recycling, food waste, plastic pollution, and waste collection with reference to Sustainable Development Goals are explained. Drivers for the way forward including circular economy are investigated.
Growing populations, expanding economies, industrialisation, and urbanisation pose a problem for waste management in developing countries. Their waste management methods, on the other hand, are not as efficient as they could be. Most developing countries' current waste management practices do not fully conform to developed countries' best practices for meeting socioeconomic goals. As a result, the importance of waste management in developing countries has grown in recent years. In order to highlight the socioeconomic perspectives of waste management practices, the present study examines the existing literature, policies, information, and records on waste management in developing nations. The findings indicate that essential socioeconomic factors such as finances, population density, per capita income, education level, policies, and technology have a significant impact on waste management, which encompasses waste generation, collection, composition, and disposal/treatment. Nonetheless, waste management has a number of economic benefits, including financial stability, job creation, and community cohesion. This study will inspire further research on the need for developing nations to consider the socioeconomic benefits of proper waste management and to develop a policy plan to achieve these benefits.
Solid waste management was explored in Asia's last five decades, and the issues and challenges were identified. Waste generation has increased in all nations in the previous 50 years, although more recently, a declining trend has been observed in Japan and Korea. The composition has been predominantly organic, with 45-50% being kitchen waste. Material extraction and productivity to sustain the most populous part of the globe are explained. Waste management technologies have evolved, with more nations slowly transitioning from landfills to using waste-to-energy options. However, landfilling and open dumps are still the major disposal choice in most developing countries in Asia. Thus, the issues of concern include dumpsites management, the informal sector, waste collection, open burning and food waste. Changes (increasing trends) in the recycling technologies and quantum are evident, as seen in several country reports from India, Indonesia, Japan, Malaysia, Singapore, South Korea, Thailand and Vietnam. There are several issues and challenges for recycling, which are explored in the text. Lastly, the drivers that propel the whole scenario of waste management in Asia and the evolution of these drivers over time are discussed. Several recommendations are included to achieve sustainable waste management in Asia.
Plastic waste circularity is a priority at a global level. Sustainable development goals (SDGs) set the ways to go, and the circular economy principles underlined the 'green' strategies to be employed. However, in practice, there is still much to do, especially in developing countries, where open burning and open dumping still represent the common way of plastic waste disposal. This review aims to analyse current plastic waste circular approaches in low-middle income settings. Seven countries were selected based on the economic level and data availability from the authors, and analysed to collect and critically discuss the actions implemented at a city level. Examples of waste minimization and recycling strategies, selective collection systems and public campaigns are reported from Africa, Asia and Latin America. First, a background analysis related to physical and governance aspects of municipal solid waste management systems of the chosen settings was conducted. The assessment was focused on the treatment processes or minimization actions. Then, the applicability of the projects to achieve the SDGs was commented on. The outcomes of the research underline the need to: (1) scale up small-scale and pilot projects, (2) disseminate good practices in more low- to middle-income settings, (3) create synergies among international partners for further replications in cities. Urgent solutions to plastic waste pollution are needed. The review presented practical actions to be implemented now to boost plastic waste circularity in developing cities.
Compost leachate (CL) is often treated as sewage. Limited studies have characterised the use of CL for agriculture application due to the variation of nutrient range, potential pollutants and need for pretreatment before use. This paper reviewed the characteristics of CL in terms of its nutrients and physical characteristics from three types of biowastes, i.e. the organic portion of municipal solid waste (OP-MSW), animal manure and green waste. The nutrient range characterised are used to develop the dilution rate of the CL as fertigation water for three types of vegetables. The dilution rate of CL developed is based on the fertigation standards set by the Food and Agriculture Organization of the United Nations and Malaysia Standards. The results show that all CL contain high organic content and micronutrients, which exceeded the upper limits. For the fertigation of vegetables using the CL, based on the requirement of COD and micronutrients (Fe, Mn, Zn, Cu, Pb, Ni, Cd, Cr) of the vegetables, the CL from green waste required the lowest dilution rate (8-45 fold), followed by animal waste (33-65 fold) and the OP-MSW (193-1770 fold). The novel dilution range developed is vital to balance the essential nutrients in the CL while avoiding phototoxicity on plant and soil pollution. The dilution strategy developed is essential to support the conversion of CL as an organic liquid fertiliser for agricultural application.
Sustainability has become a focus area for practitioners and scholars due to the growing socio-economic issues. The sustainability of airport operations is being raised in various international platforms. This paper aims to identify the dimensions of sustainability and evaluate sustainable practices in airports of selected ASEAN countries. The various dimensions associated with the environmental aspect are energy management, emissions management, water and effluents management, solid waste management. It was understood that noise management, employee development, and community investment belong to the social dimension. Similarly, the factors such as economic contribution, passenger experience, airport safety, and security are inclined to economic dimensions of sustainability. It was found that environmentally sustainable practices have greater importance than social and economic initiatives in the airport context which provide quantifiable benefits for airports in the long term. Airport operators in South East Asia strived to mitigate carbon emissions, reduce waste and effluents, enhance the economic contribution, satisfy passengers, and meet employee needs. Compared to the total economic and social benefits obtained from these airports, the negative impacts of airport operation (such as noise emission from aircraft) are minimal but significant. The most common sustainable initiatives in airports, such as employee development, energy management, and passenger safety, supported sustainable development goals (SDG) 8, SDG 9, and SDG 11. A weak connection is observed between SDG 14 & SDG 15 and the airport's sustainable practices. The new technological innovations are concentrated in busy and profitable airports. A slow trend towards the adoption of new technologies for sustainable practices is observed in airports. The paper concludes that major airport operators in South-East Asia have effectively responded to the growing sustainability challenges in aviation markets. The sustainable dimensions and practices discussed will be valuable resource for airports striving to achieve sustainability goals.
Home composting can be an effective way to reduce the volume of municipal solid waste. The aim of this study is to evaluate the effect of Effective Microorganism™ (EM) for the home scale co-composting of food waste, rice bran and dried leaves. A general consensus is lacking regarding the efficiency of inoculation composting. Home scale composting was carried out with and without EM (control) to identify the roles of EM. The composting parameters for both trials showed a similar trend of changes during the decomposition. As assayed by Fourier Transform Infrared Spectroscopy (FTIR), the functional group of humic acid was initially dominated by aliphatic structure but was dominated by the aromatic in the final compost. The EM compost has a sharper peak of aromatic CC bond presenting a better degree of humification. Compost with EM achieved a slightly higher temperature at the early stage, with foul odour suppressed, enhanced humification process and a greater fat reduction (73%). No significant difference was found for the final composts inoculated with and without EM. The properties included pH (∼7), electric conductivity (∼2), carbon-to-nitrogen ratio (C: N 100%), humic acid content (4.5-4.8%) and pathogen content (no Salmonella, <1000 Most Probable Number/g E. coli). All samples were well matured within 2 months. The potassium and phosphate contents in both cases were similar however the EM compost has a higher nitrogen content (+1.5%). The overall results suggested the positive effect provided by EM notably in odour control and humification.
After twenty-four years of government efforts, the latest national recycling rate in Malaysia rose from 5% in 1993 to approximately 24.6% in 2017. However, the practice of solid waste recycling in developing countries is still challenging compared to developing countries. Especially in Malaysia, a multi-ethnic country where people with different ethics have different living lifestyles. Still, Malaysia faces rapidly increasing solid waste and management costs, lacks appropriate data on solid waste management and recycling, lacks awareness of the 3R's (reduce, reuse and recycle) culture and lacks policies to promote 3R's culture. In addition, prior to the enforcement of ACT 672, information and networks between stakeholders have been limited for more than 20 years. Some scholars believe that the success of recycling practices is mainly influenced by community recycling behaviours. Therefore, in order to improve and evaluate the effectiveness of current national solid waste recycling management systems, research and assessment of community recycling behaviours are essential. This paper aims to evaluate the factors that attract communities to implement recycling in their daily lives and to obtain data through quantitative survey methods. Face-to-face questionnaires are conducted through purposive sampling and collected data is further analysed by PASW statistical tools. The comparison between recyclers and non-recyclers are presented in terms of frequency, means scores and radar chart. The results indicate that policy makers involved in the planning, organisation, and implementation of community recycling programs have to focus on strategies that engage community members and adopt recycling practices to improve environmental impact by changing their attitudes. Based on the results of means scores, the type of age, occupation and place of life must be taken into consideration in order to organize future recycling campaigns or awareness programs. In conclusion, the information will help policymakers make better solid waste recycling management to meet the needs of the public.
Metal, carbon and conducting polymer nanoparticles are blended with organic phase change materials (PCMs) to enhance the thermal conductivity, heat storage ability, thermal stability and optical property. However, the existing nanoparticle are expensive and need to be handle with high caution during operation as well during disposal owing to its toxicity. Subsequently handling of solid waste and the disposal of organic PCM after longevity usage are of utmost concern and are less exposed. Henceforth, the current research presents a new dimension of exploration by green synthesized nanoparticles from a thorny shrub of an invasive weed named Prosopis Juliflora (PJ) which is a agro based solid waste. Subsequently, the research is indented to decide the concentration of green synthesized nanoparticle for effective heat transfer rate of organic PCM (Tm = 35-40 °C & Hm = 145 J/g). Furthermore, an in-depth understanding on the kinetic and thermodynamic profile of degradation mechanism involved in disposal of PCM after usage via Coats and Redfern technique is exhibited. Engaging a two-step method, we fuse the green synthesized nanomaterial with PCM to obtain nanocomposite PCM. On experimental evaluation, thermal conductivity of the developed nanocomposite (PCM + PJ) increases by 63.8% (0.282 W/m⋅K to 0.462 W/m⋅K) with 0.8 wt% green synthesized nanomaterial owing to the uniform distribution of nanoparticle within PCM matrix thereby contributing to bridging thermal networks. Subsequently, PCM and PCM + PJ nanocomposites are tested using thermogravimetric analyzer at different heating rates (05 °C/min; 10 °C/min; 15 °C/min & 20 °C/min) to analyze the decomposition kinetic reaction. The kinetic and thermodynamic profile of degradation mechanism involved in disposal of PCM and its nanocomposite of PCM + PJ provides insight on thermal parameters to be considered on large scale operation and to understand the complex nature of the chemical reactions. Adopting thirteen different chemical mechanism model under Coats and Redfern method we determine the reaction mechanism; kinetic parameter like activation energy (Ea) & pre-exponential factor (A) and thermodynamic parameter like change in enthalpy (ΔH), change in Gibbs free energy (ΔG) and change in entropy (ΔS). Dispersion of PJ nanomaterial with PCM reduces Ea from 370.82 kJ/mol-1 to 342.54 kJ/mol-1 (7.7% reduction), as the developed nanomaterial is enriched in carbon element and exhibits a catalytic effect for breakdown reaction. Corresponding, value of ΔG for PCM and PCM + PJ sample within heating rates of 05-20 °C/min varies between 168.95 and 41.611 kJ/mol-1. The current research will unbolt new works with focus on exploring the pyrolysis behaviour of phase change materials and its nanocomposite used for energy storage applications. This work also provides insights on the disposal of PCM which is an organic solid waste. The thermo-kinetic profile will help to investigate and predict the optimum heating rate and temperature range for conversion of micro-scale pyrolysis to commercial scale process.
International trade of plastic waste promotes the global plastic circular economy and improves resource efficiency, but exacerbates the ubiquitous plastic pollution. Understanding the drivers behind the evolution of the global plastic waste trade network (GPWTN) is pivotal for developing new international instruments to end plastic pollution and fostering clean solid-waste trade. Employing social network analysis (SNA) and quadratic assignment procedure (QAP) model, this study structures the GPWTN using bilateral trade data, revealing shifts from highly centralized to cross-layered networks and relevant drivers. It is suggested that Malaysia and Turkey has become the new key recipients of the GPWTN, replacing China, accompanied by the launch of new environmental regulations in some countries. Transportation cost is the most critical factor for the formation of the GPWTN, followed by gaps in resource demand, bio-based resource availability, and transportation accessibility. Trading partners in closer proximity, especially those with contiguous borders, are more likely to trade in waste plastics, while coastal countries play an important role in these partnerships. Economies with more abundant biomaterials, higher incomes, and greater environmental burdens are more likely to be exporters, while economies with scarcer resources and more compelling demands are more likely to import plastic waste. Countries involved in the trade in plastic waste, as either importers or exporters, receive varying degrees of economic benefits but bear potential environmental impacts. Therefore, global plastic pollution control and trade prosperity necessitates necessitate coordinated endeavors from nations and intergovernmental bodies for a mutually advantageous denouement.
The construction industry generates a substantial volume of solid waste, often destinated for landfills, causing significant environmental pollution. Waste recycling is decisive in managing waste yet challenging due to labor-intensive sorting processes and the diverse forms of waste. Deep learning (DL) models have made remarkable strides in automating domestic waste recognition and sorting. However, the application of DL models to recognize the waste derived from construction, renovation, and demolition (CRD) activities remains limited due to the context-specific studies conducted in previous research. This paper aims to realistically capture the complexity of waste streams in the CRD context. The study encompasses collecting and annotating CRD waste images in real-world, uncontrolled environments. It then evaluates the performance of state-of-the-art DL models for automatically recognizing CRD waste in-the-wild. Several pre-trained networks are utilized to perform effectual feature extraction and transfer learning during DL model training. The results demonstrated that DL models, whether integrated with larger or lightweight backbone networks can recognize the composition of CRD waste streams in-the-wild which is useful for automated waste sorting. The outcome of the study emphasized the applicability of DL models in recognizing and sorting solid waste across various industrial domains, thereby contributing to resource recovery and encouraging environmental management efforts.