Restrictive dietetic practices, rather than helping the patient, reduce his food intake and thereby impair recovery. This is a cruelty born-of erroneous notion passed on to us as a legacy from hakims and vaids (quakes), rather than having any scientific justification. Even if some doctors do not entertain such restrictions, the so called well-wishers of patients will definitely offer free advice and impose food restrictions upon their patients. Everybody has his own share of bitter experiences, horrific memories, and heart-rending stories of the past. The chain of death and destruction remains unbroken. The gloomy, dark sky is waiting for break of a new dawn gone into eclipse years before. The ongoing Indo- Pak peace process has already resulted in a number of confidence- building measures, but in spite of all that an average of five persons each day are being killed in terror-related incidents across the State. A tricky situation prevails in which militants and security forces are pitted against each other, converting the streets, the lanes and by-lanes, and human settlements in to a well-entrenched battle ground. Innocent Kashmir’s are dying, getting maimed, and suffering mental agony and the world is watching with a nonchalant indifference.
The purpose of this study was to examine the effect of stimulus sweep direction on the fine structure of the 2f1-f2 distortion product otoacoustic emission (DPOAE). It was hypothesised that the DPOAE fine structure could be shifted if the stimulus sweep changed from one direction to the other. In the present study, ascending, descending and random frequency sweeps were used, with f2 frequency varying between 992 Hz and 2496 Hz and f2/f1 fixed at 1.22. DPOAE fine structure was recorded at 16 Hz intervals. Screening, spontaneous otoacoustic emission (SOAE) and DPOAE measurements were carried out on 19 ears of 19 subjects aged between 22 and 30 years. Data from 14 ears that had at least one significant peak or valley in their DPOAE fine structure were included in the main analysis. Of these, five ears showed at least one occurrence of SOAE over the frequency span 600 Hz to 2500 Hz. Data for ears with and without SOAEs were grouped and analysed separately. The results showed no effect of sweep direction on DPOAE fine structure. No significant differences were observed in peak or valley frequencies, peak height or valley depth between the three stimulus sweep conditions (p > 0.05). There was also no significant effect of stimulus sweep direction on DPOAE level at the point at which SOAE frequency equalled DPOAE frequency (p > 0.05). In conclusion, the study found no effect of stimulus sweep direction on the fine structure of the 2f1-f2 DPOAE, either in ears with or without SOAEs. Therefore, future measurements of this fine structure may use either sweep direction.
The most commonly used techniques of alpha and gamma spectrometry were performed to measure
210Pb activity in marine sediment core as a comparison. Alpha analytical technique measured the
activity of 210Pb from it’s in-grow grand-daughter 210Po after a chemical separation, assuming
radioactive equilibrium between the two radionuclides. Meanwhile, gamma analysis technique
allows direct measurement, non-destructive and no preliminary chemical separation. Through the
comparison, it is found that both alpha and gamma analysis techniques were slightly difference.
Overall, the results from alpha analytical technique were basically higher than those from the
gamma analytical techniques. Some logical argument had been discussed to explain this situation.
In routine analysis, the analytical technique used should be chosen carefully based on advantages
and disadvantages of the each technique and analysis requirements. Therefore, it is recommended to
determine exactly the needs and purpose of analysis and to know the sample history before decide
the appropriate analytical technique
Nur Humaira’ Lau Abdullah, Zal U’yun Wan Mahmood, Norfaizal Mohamed @ Muhamad, Nazaratul Ashifa Abdullah Salim, Ahmad Nazrul Abd Wahid, Nor Dalila Desa, et al.
A glasshouse experiment was performed to evaluate the uptake of grasses viz. Napier and Vetiver
in radiophytoremediation of caesium-contaminated soil. The radiophytoremediation experiment
was designed according to the Randomized Complete Block Design (RCBD). The grasses were
grown in troughs filled with soil mixed with a known specific activity of 134Cs. Initial Cs activity and
activity after different cultivation time intervals of 1, 3, 6 and 9 months were analyzed using gamma
spectrometer direct measurement. The results showed the uptake of caesium by Napier and Vetiver
after 9 months with the transfer factors (TF) were 4.70 and 6.25, respectively. The remediation of
caesium from the contaminated soil during the study period was 98.08% for Napier and 98.21% for
Vetiver. Both grasses have been found to accumulate caesium, with Vetiver accumulating higher
than Napier. Thus, the present study suggests that Vetiver could be used as a potential plant for
radiophytoremediation of caesium.
‘Nasi kandar’ is defined as boiled white rice placed inside a wooden basket and carried on the shoulder using a pole. The rice is served with a variety of pairing dishes that are usually fried, curried or boiled. The tradition of carrying rice and pairing dishes on the shoulder began to die out in the 20th century as seller resorted to a more conventional way of selling ‘nasi kandar’. The ‘nasi kandar’ business in Malaysia has evolved from being sold as a street food into a multi-million dollar franchise business rivalling the fast food business. It is available 24 hours and enjoyed by Malaysians from all walks of life. This study aims to compare ‘nasi kandar’ eating pattern among patrons in the Klang Valley and Penang. Three hundred sets of questionnaires were answered and collected. Data from the questionnaires were analyzed in PASW 18.0 using descriptive statistics and chi-square test for association. Klang Valley patrons (72%) would consume ‘nasi kandar’ once a week. More than half (53.3%) of the patrons from Penang consumed ‘nasi kandar’ more than twice a week. A significant relationship exists between patron’s region and frequency of ‘nasi kandar’ consumption where p = <0.0001 and r = 0.277. A significant but moderate relationship between patron’s region and consumption of ‘nasi kandar’ during breakfast (p = <0.001, r = 0.250), lunch (p = <0.0001, r = 264) and dinner (p = <0.0001, r = 0.336). Patrons in Penang consumed ‘nasi kandar’ more often than their Klang Valley counterparts. Klang Valley patrons were more particular than Penang patrons when it comes to cleanliness, menu pricing, friendly service, air-condition and separate smoking area. Klang Valley patrons tend to consume more chicken based dishes while Penang patrons tend to consume more meat, fish, and squid based dishes.
Although lipoma is common in the upper limbs, it rarely occurs in the palm, and usually does not compress the surrounding structures. Here, we report a patient presenting with compressive neuropathy of the ulna and median nerves secondary to a palmar lipoma. Surgical excision led to full neurological recovery.
The central coast of Tamil Nadu, Andaman and Nicobar Islands, along with other regions, was severely hit by the tsunami on 26 December 2004. A strange spawning behaviour of the Indian horseshoe crabs (Tachypleus gigas, Müller) was observed after the tsunami disturbance. Along the northeast coast of India, the horseshoe crabs normally migrate towards the shore in large numbers coinciding with the tidal height and grain size of the sediment and spawn in nests made in sand. The spawning behaviour was normal until November 2004 and throughout that period about 35 to 45 nests in 200 m2 of area of the breeding beach were examined. However, no nesting was observed from December 2004 to March 2005, i.e. after the occurrence of tsunami. The number of nests per 200 m2 of area (~82) and the number of eggs per nest (750-1000 eggs) were increased considerably when the normal conditions were restored in April 2005. The absence of spawning migration, from December 2004 to March 2005, is totally an unusual behaviour and this happened for the first time during the past several years of the study period.
A series of polycrystalline samples (La1-xSmx)0.67Sr0.33MnO3 (X=0.00, 0.05 and 0.10) were prepared using the conventional solid-state reaction method. The XRD analysis indicated that all the samples were fully crystalline and in a single phase with a rhombohedral structure after a sintering at 1200ºC for 24 hours in air. Meanwhile, the Atomic Force Microscopy measurements showed that a small amount of Sm doping in La sites affected the grain growth and this might affect the grain boundary layer, thus resulting in the reduction of the Curie temperature, TC. Extrinsic magnetoresistance (MR) was observed for all the samples with a large negative MR at low field (0-0.1 or 0.2T) region, followed by a slower varying MR at high field (0.1 or 0.2-1T). The highest low-field MR value of -4.6% (at 0.1T) and -6.1% (at 0.2T) were observed for sample X=0.10 and X=0.05, respectively. Hence, these indicated that the extrinsic MR was grain size dependent and was therefore enhanced with a small amount of Sm substitution in La sites.
A field study was conducted on the effect of four primary tillage implements and three seed densities on the grain yield of rain fed wheat (Tajan cultivar), using a drill planting machine with the end wheels. The experimental design was a split plot design in a 4×3 factorial with three replications. In this study, the main plots were the tillage treatments, namely Mouldboard plough, Disc Plough, Chisel Plough, Offset Disc, and sub-plots were seed rates of 350, 400 and 450 seeds.m-2. Determinations included grain yield and selected yield components. The results showed that grain yield was not affected by the densities of seed and tillage machine treatments. The use of Chisel Plough, with 400 seeds.m-2 sowing rate, had the highest grain yield of wheat grown in the Golestan province (Iran), a region with an average annual rainfall of 450 mm.
Compartmented Fluidized Bed Gasifier (CFBG), consisting of two compartments - the combustorand gasifier, uses air blown instead of pure oxygen for syngas production in bubbling fluidization mode, eliminating the need of air separation unit, and reducing the capital cost, thus distinguishes it from other traditional ones. Fluidization quality is a determining factor in the CFBG to guarantee its well-lifted behaviour. Previous study, without solid circulation at ambient conditions, brought to the fore the necessity of considering the effect of the minimum allowable effective diameter. The study was then performed in the CFBG cold physical model of 0.66m overall diameter (effective diameter for combustor and gasifier is 0.413m and 0.257m) to investigate the fluidization quality and compare it with the results obtained from the previous cold model of about 1.36 times smaller, but with the same compartmented ratio of 65:35. Different inert particles (river sand, quartz sand and alumina) were used, over a range of aspect ratios, for the aforementioned objective. The results showed that the fluidization quality in the gasifier has not been achieved and the degradation of fluidization quality in the combustor is still observed, notwithstanding the fact that the condition of the minimum allowable effective diameter has been met. The reduction of distributor free area, to increase the distributor pressure drop, showed a marginal effect on the quality. The effect of the minimum allowable effective diameter on fluidization quality in CFBG as well as the interplay of geometric and operational parameters require further studies be carried out. The fluidization quality of the binary mixture is also currently under investigation.
The process of etching is the most crucial part of the work of manufacturing printed circuit boards (PCB). In the etching process by nitric acid, a spent etching waste solution of composition 250 g/L HNO3, 30-40 g/L Cu, 30-40 g/L Sn, 30-40 g/L Pb and 20-25 g/L Fe is produced. High metal concentrations in the spent etching waste solution make it a viable candidate for the recovery of metals. Recovery of metals from spent etching waste solution is a significant concern as the recent growth in production of printed circuit boards has generated a drastic increase of spent etching waste solution each year. This study concerns itself with the recovery of metals from spent etching waste. In this study a dilution was made in order to increase the pH of the solution as spent etching waste solution has high acidity, and the electrowinning method was performed to recover metals from the spent etching waste solution. Glassy carbon and platinum were used as cathode and anode in order to investigate the electrodeposition of metals and cyclic voltammetry investigation suggests that the deposition of metals on glassy carbon electrodes occurs at four different overpotentials mainly at -0.15 V, -0.35 V, -0.45 V and -0.75 V. Microscopy observation demonstrates that there is a deposition of metals by applying the potentials in a set of current-time transient study for a duration of 60 seconds and the metals recovered formed as aggregates.
Studies have been carried out to determine the chemical (soluble solid content) and physical (firmness) parameters of locally grown Cavendish banana by near infrared (NIR) spectroscopy. NIR spectra in the wavelength region of 680-2500 nm were obtained from a total of 408 Cavendish bananas of different ripeness indices. Chemometrics using multiple linear regression (MLR) was applied to develop calibration models for prediction of firmness and soluble solid content (SSC) of Cavendish banana. Results showed that NIR spectroscopy had the feasibility for non-destructive determination of the quality of Cavendish banana. The coefficient of determination (R2) for firmness and SSC calibration models at different ripeness indices ranged from 0.78 to 0.86 and 0.75 to 0.96, respectively. The calibration models were validated using independent sets of data and prediction models developed with the root mean square error of prediction (RMSEP) ranged from 0.01 to 0.26 kgf and 0.039 to 0.788 Brix for firmness and SSC, respectively. The multi-index models showed considerable robustness but higher prediction error with RMSEP of 0.336 kgf for firmness and 0.937% Brix for SSC compared to index specific model.
Chili shrimp paste (CSP) is a favorite condiment in Southeast Asia. Microbial spoilage makes CSP unsuitable for consumption within several days. Thermal treatment was applied to produce microbiologically safe CSP. The effect of heating process on physicochemical and sensorial properties of CSP was studied. Heating at the optimum condition (21.6 min, 80 ˚C) has been shown effective and reliable in controlling microorganisms in CSP. Complete inactivation of peroxidase activities could not be accomplished at the optimal point, and significant reduction of the total phenolic and capsaicinoids contents was observed. Sensorial evaluation indicated that thermally processed CSP was less preferred by panelists when compared to freshly prepared samples of dry weight respectively.
Disaster can strike at any time on a small or large scale, but if an institution is prepared, the damage may be reduced or avoided. A disaster is a serious disruption of the functioning of a society, causing widespread human, material, or environmental losses which exceed the ability of affected society to cope using only its own resources. Disasters are often classified according to their speed of onset (sudden or ‘slow burning’), or according to their cause (natural or man-made). There is no single and specific method in handling a disaster. The application and method of disaster management do not only depend on types, location and levels of disaster, but also depend on the effectiveness and good system of management as well as the total commitment of first responders and disaster managers involved in handling a disaster. National Security Council Directive No. 20 is both a proactive and reactive generic plan to manage disasters in Malaysia. It is an integrated disaster management plan in mitigation, preparedness, response and recovery.
The aim of this study was to assess the most probable number-polymerase chain reaction (MPNPCR) technique for detection of Listeria monocytogenes in salad vegetables in comparison with reference EN ISO 11290-2 and Food Drug Administration Bacteriological Analytical Manual method using artificial and naturally contaminated samples. Based on recovery of L. monocytogenes from artificially contaminated samples, MPN-PCR showed a moderate correlation (R=0.67) between spiking concentration and microbial levels which was better than the FDA-BAM method (R=0.642) and ISO 11290-2:1998 method (R=0.655). With naturally contaminated samples, it was found that L. monocytogenes was detected in 25% of the vegetable samples using MPN-PCR; 15% of the samples by the FDA-BAM method and 8% of samples using ISO 11290-2:1998 method. Overall, MPN-PCR was found to be a rapid and reliable method that could facilitate the enumeration of L. monocytogenes in vegetables.
Living with borderline personality disorder (BPD) involves a lot of emotional suffering which may be hidden behind the complex and controversial nature of the condition and treatment. The condition is still largely under-diagnosed, undertreated and stigmatized. This paper described the emotional battle faced by a patient living with the disorder and the application of psychosocial treatments in helping her to recover.
Protocorm-like bodies (PLBs) of an orchid (Oncidium lanceanum) were irradiated using 220 MeV 12 C 5+ ions, accelerated by AVF cyclotron at JAEA, Japan in 2005. Five different doses were applied to the PLBs; 0, 1.0, 2.0, 6.0 and 12.0 Gy. Following irradiation, these PLBs were maintained in cultures for germination and multiplication. Irradiation effects on growth and seedling regeneration patterns as well as molecular characteristics of the in vitro cultures were monitored and recorded. In general, average fresh weights of the irradiated PLBs increased progressively by irradiating the explants at 1.0, 2.0 and reached the maximum at 6.0 Gy. The figure however dropped when the explants were irradiated at 12 Gy. Surprisingly, although the highest average fresh weight was recorded on PLBs irradiated at 6.0 Gy, most of these PLBs were not able to regenerate into complete shoots. On average, after 4 months of irradiation, only 21 seedlings were successfully regenerated from each gram of these PLBs. The highest shoot regeneration was recorded on cultures irradiated at 2.0 Gy in which 102 seedlings were obtained from one gram of the PLBs. Some morphological changes were seen on in vitro plantlets derived from PLBs irradiated at doses of 1.0 and 2.0 Gy. Most of the regenerated seedlings have been transferred to glasshouse for further morphological selection. Molecular analysis showed the presence of DNA polymorphisms among the seedlings from different doses of irradiation.
The microstructural evolution of Sn-40Pb/Cu joints has been investigated under 125 o C thermal exposure conditions using single shear lap joints. A scanning electron microscope (SEM) was used to observe the morphology of the phases and energy dispersive x-ray (EDX) was used to estimate the elemental compositions of the phases. A double layer of Cu6Sn5 and Cu3Sn were observed. The Cu6Sn5 developed with a scalloped morphology, while the Cu3Sn always grew as a somewhat undulated planar layer in phase with the Cu6Sn5. The Cu6Sn5 layer began to transform from scallop shape to planar type after aging for 375 hours due to reduction in the interfacial energy. The intermetallic layers showed a linear dependence on the square root of aging time. The growth rate constant of the intermetallic compounds are estimated as 15.2 x 10 - 14 and 0.152 x 10 -14 cm 2 /s for Cu6Sn5 and Cu3Sn intermetallic, respectively.
The presence of airflow during heating process is expected to increase heat uniformity in a closed heating chamber. Circulation of hot air increases the percentage of convective heat transfer. In this study effects of airflow on oven temperature, cake temperature and several cake qualities were investigated. Experimental studies were conducted in convective oven using two different baking modes; with and without airflow. During baking, oven temperatures and internal cake temperature were measured, and images of cake expansion were captured. Results of the study showed that the presence of airflow could maintain the oven temperature within a small range of set point temperature. Temperature in the oven exhibited ±5.5°C fluctuation, approximately 3.5% overshoot that occurred continuously during baking with airflow. On the contrary, higher overshoot (ranging from 15 to 30%) was observed in oven temperature without airflow. Airflow also showed a significant effect (p