Displaying publications 21 - 40 of 71 in total

Abstract:
Sort:
  1. Fulltext Evening home lighting adversely impacts the circadian system and sleep
    Cain SW, McGlashan EM, Vidafar P, Mustafovska J, Curran SPN, Wang X, et al.
    Sci Rep, 2020 11 05;10(1):19110.
    PMID: 33154450 DOI: 10.1038/s41598-020-75622-4
    The regular rise and fall of the sun resulted in the development of 24-h rhythms in virtually all organisms. In an evolutionary heartbeat, humans have taken control of their light environment with electric light. Humans are highly sensitive to light, yet most people now use light until bedtime. We evaluated the impact of modern home lighting environments in relation to sleep and individual-level light sensitivity using a new wearable spectrophotometer. We found that nearly half of homes had bright enough light to suppress melatonin by 50%, but with a wide range of individual responses (0-87% suppression for the average home). Greater evening light relative to an individual's average was associated with increased wakefulness after bedtime. Homes with energy-efficient lights had nearly double the melanopic illuminance of homes with incandescent lighting. These findings demonstrate that home lighting significantly affects sleep and the circadian system, but the impact of lighting for a specific individual in their home is highly unpredictable.
    Matched MeSH terms: Lighting*
  2. Fulltext The effect of lighting conditions and use of headlights on drivers' perception and appraisal of approaching vehicles at junctions
    Lee YM, Sheppard E
    Ergonomics, 2018 Mar;61(3):444-455.
    PMID: 28782425 DOI: 10.1080/00140139.2017.1364790
    Use of Daytime Running Lights (DRL) is mandatory in many countries for motorcycles, and in some for cars. However, in developing countries, DRLs may be optional or compliance low. The effect of car or motorcycle headlights and lighting conditions on Malaysian drivers' ability to perceive and judge the safety of pulling out was investigated. Stimuli were photographs depicting either daytime or nighttime taken at a T-junction with approaching vehicles with headlights on or off. Headlights improved drivers' ability to perceive cars and motorcycles in the nighttime photographs but not the daytime photographs, although this could be due to the bright weather in the photographs. Drivers judged it less safe to pull out when approaching motorcycles had headlights on than off, regardless of the lighting conditions, supporting the utility of DRL for motorcycles. Headlights did not affect judgements for cars, questioning the utility of DRL for cars. Practitioner Summary: The effect of headlights and lighting conditions on drivers' ability to perceive and make judgements about the safety of pulling out was investigated. Daytime Running Lights influenced drivers' decision-making about the safety of pulling out in front of motorcycles, illustrating the importance of having automatic headlights equipped.
    Matched MeSH terms: Lighting*
  3. Electrical behaviour of MEH-PPV based diode and transistor
    Reshak AH, Shahimin MM, Juhari N, Suppiah S
    Prog Biophys Mol Biol, 2013 Nov;113(2):289-94.
    PMID: 24080185 DOI: 10.1016/j.pbiomolbio.2013.09.002
    The potential of organic semiconductor based devices for light generation is demonstrated by the commercialisation of display technologies using organic light emitting diode (OLED). In OLED, organic materials plays an important role of emitting light once the current is passed through. However OLED have drawbacks whereby it suffers from photon loss and exciton quenching. Organic light emitting transistor (OLET) emerged as a new technology to compensate the efficiency and brightness loss encountered in OLED. The structure has combinational capability to switch the electronic signal such as the field effect transistor (FET) as well as to generate light. Different colours of light could be generated by using different types of organic material. The light emission could also be tuned and scanned in OLET. The studies carried out in this paper focuses on investigation of fabricated MEH-PPV based OLED and also OLET via current voltage characteristics. These studies will continue with a view to develop an optimised MEH-PPV based OLET.
    Matched MeSH terms: Lighting/instrumentation*
  4. Fulltext Illumination Intelligent Adaptation and Analysis Framework: A comprehensive solution for enhancing nighttime driving fatigue monitoring
    Tian Z, Albakry NS, Du Y
    PLoS One, 2024;19(8):e0308201.
    PMID: 39141655 DOI: 10.1371/journal.pone.0308201
    Nighttime driving presents a critical challenge to road safety due to insufficient lighting and increased risk of driver fatigue. Existing methods for monitoring driver fatigue, mainly focusing on behavioral analysis and biometric monitoring, face significant challenges under low-light conditions. Their effectiveness, especially in dynamic lighting environments, is limited by their dependency on specific environmental conditions and active driver participation, leading to reduced accuracy and practicality in real-world scenarios. This study introduces a novel 'Illumination Intelligent Adaptation and Analysis Framework (IIAAF)', aimed at addressing these limitations and enhancing the accuracy and practicality of driver fatigue monitoring under nighttime low-light conditions. The IIAAF framework employs a multidimensional technology integration, including comprehensive body posture analysis and facial fatigue feature detection, per-pixel dynamic illumination adjustment technology, and a light variation feature learning system based on Convolutional Neural Networks (CNN) and time-series analysis. Through this integrated approach, the framework is capable of accurately capturing subtle fatigue signals in nighttime driving environments and adapting in real-time to rapid changes in lighting conditions. Experimental results on two independent datasets indicate that the IIAAF framework significantly improves the accuracy of fatigue detection under nighttime low-light conditions. This breakthrough not only enhances the effectiveness of driving assistance systems but also provides reliable scientific support for reducing the risk of accidents caused by fatigued driving. These research findings have significant theoretical and practical implications for advancing intelligent driving assistance technology and improving nighttime road safety.
    Matched MeSH terms: Lighting*
  5. Fulltext Robust observation detection for single object tracking: deterministic and probabilistic patch-based approaches
    Zulkifley MA, Rawlinson D, Moran B
    Sensors (Basel), 2012;12(11):15638-70.
    PMID: 23202226 DOI: 10.3390/s121115638
    In video analytics, robust observation detection is very important as the content of the videos varies a lot, especially for tracking implementation. Contrary to the image processing field, the problems of blurring, moderate deformation, low illumination surroundings, illumination change and homogenous texture are normally encountered in video analytics. Patch-Based Observation Detection (PBOD) is developed to improve detection robustness to complex scenes by fusing both feature- and template-based recognition methods. While we believe that feature-based detectors are more distinctive,however, for finding the matching between the frames are best achieved by a collection of points as in template-based detectors. Two methods of PBOD-the deterministic and probabilistic approaches-have been tested to find the best mode of detection. Both algorithms start by building comparison vectors at each detected points of interest. The vectors are matched to build candidate patches based on their respective coordination. For the deterministic method, patch matching is done in 2-level test where threshold-based position and size smoothing are applied to the patch with the highest correlation value. Forthe second approach, patch matching is done probabilistically by modelling the histograms of the patches by Poisson distributions for both RGB and HSV colour models. Then,maximum likelihood is applied for position smoothing while a Bayesian approach is appliedfor size smoothing. The result showed that probabilistic PBOD outperforms the deterministic approach with average distance error of 10.03% compared with 21.03%. This algorithm is best implemented as a complement to other simpler detection methods due to heavy processing requirement.
    Matched MeSH terms: Lighting
  6. Fulltext An Adaptive TE-PV Hybrid Energy Harvesting System for Self-Powered IoT Sensor Applications
    Mishu MK, Rokonuzzaman M, Pasupuleti J, Shakeri M, Rahman KS, Binzaid S, et al.
    Sensors (Basel), 2021 Apr 08;21(8).
    PMID: 33917665 DOI: 10.3390/s21082604
    In this paper, an integrated thermoelectric (TE) and photovoltaic (PV) hybrid energy harvesting system (HEHS) is proposed for self-powered internet of thing (IoT)-enabled wireless sensor networks (WSNs). The proposed system can run at a minimum of 0.8 V input voltage under indoor light illumination of at least 50 lux and a minimum temperature difference, ∆T = 5 °C. At the lowest illumination and temperature difference, the device can deliver 0.14 W of power. At the highest illumination of 200 lux and ∆T = 13 °C, the device can deliver 2.13 W. The developed HEHS can charge a 0.47 F, 5.5 V supercapacitor (SC) up to 4.12 V at the combined input voltage of 3.2 V within 17 s. In the absence of any energy sources, the designed device can back up the complete system for 92 s. The sensors can successfully send 39 data string to the webserver within this time at a two-second data transmission interval. A message queuing telemetry transport (MQTT) based IoT framework with a customised smartphone application 'MQTT dashboard' is developed and integrated with an ESP32 Wi-Fi module to transmit, store, and monitor the sensors data over time. This research, therefore, opens up new prospects for self-powered autonomous IoT sensor systems under fluctuating environments and energy harvesting regimes, however, utilising available atmospheric light and thermal energy.
    Matched MeSH terms: Lighting
  7. Fulltext Car license plate detection method for Malaysian plates-styles by using a web camera
    Al-Ghaili, Abbas M., Syamsiah Mashohor, Abdul Rahman Ramli, Alyani Ismail
    Pertanika Journal of Science & Technology, 2010;18(2):-.
    MyJurnal
    Recently, license plate detection has been used in many applications especially in transportation systems. Many methods have been proposed in order to detect license plates, but most of them work under restricted conditions such as fixed illumination, stationary background, and high resolution images. License plate detection plays an important role in car license plate recognition systems because it affects the accuracy and processing time of the system. This work aims to build a Car License Plate Detection (CLPD) system at a lower cost of its hardware devices and with less complexity of algorithms’ design, and then compare its performance with the local CAR Plate Extraction Technology (CARPET). As Malaysian plates have special design and they differ from other international plates, this work tries to compare two likely-design methods. The images are taken using a web camera for both the systems. One of the most important contributions in this paper is that the proposed CLPD method uses Vertical Edge Detection Algorithm (VEDA) to extract the vertical edges of plates. The proposed CLPD method can work to detect the region of car license plates. The method shows the total time of processing one 352x288 image is 47.7 ms, and it meets the requirement of real time processing. Under the experiment datasets, which were taken from real scenes, 579 out of 643 images were successfully detected. Meanwhile, the average accuracy of locating car license plate was 90%. In this work, a comparison between CARPET and the proposed CLPD method for the same tested images was done in terms of detection rate and efficiency. The results indicated that the detection rate was 92% and 84% for the CLPD method and CARPET, respectively. The results also showed that the CLPD method could work using dark images to detect license plates, whereas CARPET had failed to do so.
    Matched MeSH terms: Lighting
  8. Fulltext Microfluidic systems for dielectrophoretic separation of fluorescent particles
    Yunus, N.A.M., Jaafar, H., Halin, I.A., Green, N.G.
    ASM Science Journal, 2014;8(1):29-35.
    MyJurnal
    This paper presents a suitable and unique system for observing dielectrophoretic particle separation in a microfluidic device. Details presented on the experimental setup used will enable real time examination, monitoring and analysis of carboxylate-modified latex sphere particles in a colloidal mixture. Observations of the particles were made possible through an optical setup that illuminates the particles that went through the microelectrode array in the microchannel that was controlled by two analog signal generators. Through the setup, it was easily observed that the latex sphere particles move at a flow rate of 0.2 μl/s without colliding or overlapping on each other and successfully separated in two bands left and right. The new separation of one finest particles size for finest purification with respect to frequency was also observed, obtained and analysed.
    Matched MeSH terms: Lighting
  9. Change in level of classroom lighting at a special education school distortion of vision and comparison of lighting at different lighting conditions
    Wan Nur ‘Amirah Ibrahim, Zainora Mohammed, Norliza Mohamad Fadzil, Sumithira Narayanasamy, Mohd ‘Izzuddin Hairol
    Sains Malaysiana, 2018;47:1835-1842.
    Illumination is one of the important physical aspects that influences comfortability during learning session particularly
    among visually impaired students. The purpose of this study was to determine changes in illumination level in classrooms
    during learning session at Sekolah Menengah Pendidikan Khas (SMPK), Setapak. The second objective was to compare
    the illumination level in the classrooms under three different lighting conditions: daylight only, with additional artificial
    light and with removal of obstructions to daylight. Illumination levels in 17 classrooms was measured at one hour interval,
    between 8 am to 1 pm for the first stage and 19 classrooms under three different lighting conditions from 11 am to 12 noon
    for the second stage, using ILM1335 (ISO-TECH, Taiwan) digital luxmeter. Illumination level increased significantly from
    8 am to 11 am (One-Way Repeated Measures ANOVA: F(2.14, 34.26)=76.49, p<0 .001) and was maximum at 1 pm. The
    illumination level was highest for the condition of daylight with additional artificial light (One-Way Repeated Measures
    ANOVA: F(2,34)=110.51, p<0.001) compared to other conditions. Illumination levels for daylight without obstruction
    was significantly higher than daylight only (pairwise comparison: p=0.001). Classroom illumination level was lowest
    in the early morning. However, classroom illumination can be increased either by removing the obstructions to daylight
    or with additional artificial lighting.
    Matched MeSH terms: Lighting
  10. Levels of Visual Stress in Proficient Readers: Effects of Spectral Filtering of Fluorescent Lighting on Reading Discomfort
    Loew SJ, Rodríguez C, Marsh NV, Jones GL, Núñez JC, Watson K
    Span J Psychol, 2015;18:E58.
    PMID: 26255657 DOI: 10.1017/sjp.2015.59
    Visual stress (VS) affects reading in 5-12% of the general population and 31-36% of children with reading disorders. Symptoms include print distortions and visual discomfort when reading, and are exacerbated by fluorescent lighting. Prior research has indicated that VS can also affect proficient readers. We therefore examined levels of visual discomfort in a group of expert readers (n = 24) under both standard and spectrally-filtered fluorescent lighting. Participants rated their awareness of six symptoms of VS under each lighting condition. Under the standard condition, 4(16.7%) of the group recorded moderate to high levels of VS. Differences in symptom levels and reading speed between conditions were analysed using the Wilcoxon Signed Rank Test. Under the filter condition, the group reported less discomfort regarding all six symptoms of VS surveyed. The differences were significant with respect to three of the symptoms (p = .029 - p < .001), with a medium effect size in all of them (r = .31 - r = .46) and total score (p = .007; r = .39). Variations in reading proficiency included significantly fewer self-corrections (p = .019) and total errors (p = .004). Here we present evidence that VS-type symptoms of reading discomfort are not confined to populations with reading difficulties and may also occur in proficient readers, and that simple adaptations to fluorescent lighting may alleviate such symptoms.
    Matched MeSH terms: Lighting/adverse effects*; Lighting/standards
  11. Fulltext Boosting Photovoltaic Performance of Dye-Sensitized Solar Cells Using Silver Nanoparticle-Decorated N,S-Co-Doped-TiO2 Photoanode
    Lim SP, Pandikumar A, Lim HN, Ramaraj R, Huang NM
    Sci Rep, 2015;5:11922.
    PMID: 26146362 DOI: 10.1038/srep11922
    A silver nanoparticle-decorated N,S-co-doped TiO2 nanocomposite was successfully prepared and used as an efficient photoanode in high-performance dye-sensitized solar cells (DSSCs) with N719 dye. The DSSCs assembled with the N,S-TiO2@Ag-modified photoanode demonstrated an enhanced solar-to-electrical energy conversion efficiency of 8.22%, which was better than that of a DSSC photoanode composed of unmodified TiO2 (2.57%) under full sunlight illumination (100 mWcm(-2), AM 1.5 G). This enhanced efficiency was mainly attributed to the reduced band gap energy, improved interfacial charge transfer, and retarded charge recombination process. The influence of the Ag content on the overall efficiency was also investigated, and the optimum Ag content with N,S-TiO2 was found to be 20 wt%. Because of the enhanced solar energy conversion efficiency of the N,S-TiO2@Ag nanocomposite, it should be considered as a potential photoanode for high-performance DSSCs.
    Matched MeSH terms: Lighting
  12. Isolation of chromatic and achromatic mechanisms: a new approach
    Sharanjeet-Kaur, Kulikowski JJ, Carden D
    Ophthalmic Physiol Opt, 1998 Jan;18(1):49-56.
    PMID: 9666910
    The purpose of this study was to optimise the testing paradigm for isolating the contributions of chromatic and achromatic mechanisms to the human spectral sensitivity function. Spectral sensitivity was determined for a test spot size of 1.2 deg presented with various spatial and temporal masks on a large, 10 deg background field of moderate intensity (1000 td) and colour temperature, CT = 2700 K. Sinusoidal temporal presentation (1 Hz) and a masking annulus of between 3 and 10 min of arc surrounding the test spot, was found to be most effective in separating chromatic from achromatic mechanisms. Square-wave (1 Hz) temporal presentation combined with the annulus was slightly less selective. The presence of the annulus did not affect the shape of flicker detection at 25 Hz which is a measure of the luminosity (achromatic) spectral sensitivity function.
    Matched MeSH terms: Lighting
  13. Fulltext The Effects of Different Outdoor Environments, Sunglasses and Hats on Light Levels: Implications for Myopia Prevention
    Lanca C, Teo A, Vivagandan A, Htoon HM, Najjar RP, Spiegel DP, et al.
    Transl Vis Sci Technol, 2019 Jul;8(4):7.
    PMID: 31360613 DOI: 10.1167/tvst.8.4.7
    Purpose: Lack of outdoor time is a known risk factor for myopia. Knowledge of the light levels reaching the eye and exposure settings, including sun-protective measures, is essential for outdoor programs and myopia. We evaluated the impact of sun-protective strategies (hat and sunglasses) on maintaining high illuminance levels to prevent myopia.

    Methods: A child-sized mannequin head was developed to measure light illuminance levels with and without sun-protective equipment, across a wide range of environments in Singapore, outdoors (open park, under a tree, street) and indoors (under a fluorescent illumination with window, under white LED-based lighting without window). A comparison was made between indoor and outdoor light levels that are experienced while children are involved in day-to-day activities.

    Results: Outdoor light levels were much higher (11,080-18,176 lux) than indoors (112-156 lux). The higher lux levels protective of myopia (>1000 lux) were measured at the tree shade (5556-7876 lux) and with hat (4112-8156 lux). Sunglasses showed lux levels between 1792 and 6800 lux. Although with sunglasses readings were lower than tree shade and hat, light levels were still 11 to 43 times higher than indoors.

    Conclusions: Recommendations on spending time outdoors for myopia prevention with adequate sun protection should be provided while partaking in outdoor activities, including protection under shaded areas, wearing a hat or sunglasses, sunscreen, and adequate hydration.

    Translational Relevance: Light levels outdoors were higher than indoors and above the threshold illuminance for myopia prevention even with adequate sun-protective measures.

    Matched MeSH terms: Lighting
  14. Fulltext A Review on Haematococcus pluvialis Bioprocess Optimization of Green and Red Stage Culture Conditions for the Production of Natural Astaxanthin
    Oslan SNH, Shoparwe NF, Yusoff AH, Rahim AA, Chang CS, Tan JS, et al.
    Biomolecules, 2021 02 10;11(2).
    PMID: 33578851 DOI: 10.3390/biom11020256
    As the most recognizable natural secondary carotenoid astaxanthin producer, the green microalga Haematococcus pluvialis cultivation is performed via a two-stage process. The first is dedicated to biomass accumulation under growth-favoring conditions (green stage), and the second stage is for astaxanthin evolution under various stress conditions (red stage). This mini-review discusses the further improvement made on astaxanthin production by providing an overview of recent works on H. pluvialis, including the valuable ideas for bioprocess optimization on cell growth, and the current stress-exerting strategies for astaxanthin pigment production. The effects of nutrient constituents, especially nitrogen and carbon sources, and illumination intensity are emphasized during the green stage. On the other hand, the significance of the nitrogen depletion strategy and other exogenous factors comprising salinity, illumination, and temperature are considered for the astaxanthin inducement during the red stage. In short, any factor that interferes with the cellular processes that limit the growth or photosynthesis in the green stage could trigger the encystment process and astaxanthin formation during the red stage. This review provides an insight regarding the parameters involved in bioprocess optimization for high-value astaxanthin biosynthesis from H. pluvialis.
    Matched MeSH terms: Lighting
  15. Fulltext EFFECTS OF TANK COLOUR ON BODY COLOUR INTENSITY AND GROWTH OF YELLOW GOURAMI Trichopodus trichopterus
    Asra Nor Izaty, A., Norazmi-Lokman, N. H.
    UMT Journal of Undergraduate Research, 2019;1(4):9-18.
    MyJurnal
    Yellow gourami (Trichopodus trichopterus) is a species native to Southeast Asia and is famous as ornamental species. However, hobbyists and farmers encounter problems where its body colour easily becomes faded in captivity. Since colour enhancer pellets are expensive, an experiment was performed to determine whether tank colour can influence the body colour intensity and growth of T. trichopterus. Four different tank colours (white, yellow, blue and green) with five replicates were tested where fish were kept under natural lighting (outdoor) conditions for two months. The results demonstrated that fish reared in green coloured tank showed an increment in its colour intensity while fish reared in white tanks increased its body weight. It can be concluded that tank colour does affect the body colour intensity and weight of T. trichopterus. This study will help farmers and hobbyists to solve colour fading problem using a cheaper way.
    Matched MeSH terms: Lighting
  16. Fulltext Solution Processed PVB/Mica Flake Coatings for the Encapsulation of Organic Solar Cells
    Channa IA, Chandio AD, Rizwan M, Shah AA, Bhatti J, Shah AK, et al.
    Materials (Basel), 2021 May 12;14(10).
    PMID: 34065936 DOI: 10.3390/ma14102496
    Organic photovoltaics (OPVs) die due to their interactions with environmental gases, i.e., moisture and oxygen, the latter being the most dangerous, especially under illumination, due to the fact that most of the active layers used in OPVs are extremely sensitive to oxygen. In this work we demonstrate solution-based effective barrier coatings based on composite of poly(vinyl butyral) (PVB) and mica flakes for the protection of poly (3-hexylthiophene) (P3HT)-based organic solar cells (OSCs) against photobleaching under illumination conditions. In the first step we developed a protective layer with cost effective and environmentally friendly methods and optimized its properties in terms of transparency, barrier improvement factor, and bendability. The developed protective layer maintained a high transparency in the visible region and improved oxygen and moisture barrier quality by the factor of ~7. The resultant protective layers showed ultra-flexibility, as no significant degradation in protective characteristics were observed after 10 K bending cycles. In the second step, a PVB/mica composite layer was applied on top of the P3HT film and subjected to photo-degradation. The P3HT films coated with PVB/mica composite showed improved stability under constant light irradiation and exhibited a loss of <20% of the initial optical density over the period of 150 h. Finally, optimized barrier layers were used as encapsulation for organic solar cell (OSC) devices. The lifetime results confirmed that the stability of the OSCs was extended from few hours to over 240 h in a sun test (65 °C, ambient RH%) which corresponds to an enhanced lifetime by a factor of 9 compared to devices encapsulated with pristine PVB.
    Matched MeSH terms: Lighting
  17. Enhanced Photocatalytic Performance of Sn6SiO8 Nanoparticles and Their Reduced Graphene Oxide (rGO) Nanocomposite
    Gnanamoorthy G, Muthukumaran M, Varun Prasath P, Karthikeyan V, Narayanan V, Sagadevan S, et al.
    J Nanosci Nanotechnol, 2020 09 01;20(9):5426-5432.
    PMID: 32331114 DOI: 10.1166/jnn.2020.17814
    Photocatalysts provide excellent potential for the full removal of organic chemical pollutants as an environmentally friendly technology. It has been noted that under UV-visible light irradiation, nanostructured semiconductor metal oxides photocatalysts can degrade different organic pollutants. The Sn6SiO8/rGO nanocomposite was synthesized by a hydrothermal method. The Sn6SiO8 nanoparticles hexagonal phase was confirmed by XRD and functional groups were analyzed by FT-IR spectroscopy. The bandgap of Sn6SiO8 nanoparticles (NPs) and Sn6SiO8/GO composites were found to be 2.7 eV and 2.5 eV, respectively. SEM images of samples showed that the flakes like morphology. This Sn6SiO8/rGO nanocomposite was testing for photocatalytic dye degradation of MG under visible light illumination and excellent response for the catalysts. The enhancement of photocatalytic performance was mainly attributed to the increased light absorption, charge separation efficiency and specific surface area, proved by UV-vis DRS. Further, the radical trapping experiments revealed that holes (h+) and superoxide radicals (·O-₂) were the main active species for the degradation of MG, and a possible photocatalytic mechanism was discussed.
    Matched MeSH terms: Lighting
  18. Fulltext Ecological Characteristics of a Gonystylus bancanus-rich Area in Pekan Forest Reserve, Pahang, Malaysia
    Hamzah KA, Ismail P, Kassim AR, Hassan CH, Akeng G, Said NM
    Trop Life Sci Res, 2009 Dec;20(2):15-27.
    PMID: 24575176 MyJurnal
    Tropical peat swamp forest (PSF) is a unique wetland ecosystem with distinct vegetation types. Due to the waterlogged environment, the stand characteristics in this ecosystem are different from those of other inland forests. This paper highlights stand characteristics of a PSF based on our investigation of a 1 ha ecological plot established in a Virgin Jungle Reserve (VJR) at Compartment 100, Pekan Forest Reserve, Pahang, Malaysia. This site is considered a Gonystylus bancanus-rich area. From the inventory, we recorded a total of 49 tree species from 38 genera and 25 families among all trees of ≥ 10 cm in diameter at breast height. Calophyllum ferrugineum var. ferrugineum was the most abundant species, followed by G. bancanus. The forest appeared healthy, as all tree characteristics (crown shape, log grade and climber infestation) generally fell within Classes 1 and 2 (good and moderate categories), with the exception of crown illumination which majority of the trees were rated as class 3 (received less sunlight). The latter finding indicates that most of the trees living under the canopy received minimal illumination. In terms of total tree biomass, we estimated that about 414.6 tonnes exist in this 1 ha area; this tree biomass is higher than in some PSF areas of Sumatra, Indonesia.
    Matched MeSH terms: Lighting
  19. Fulltext Application of computer vision in the detection of chilling injury in bananas
    Norhashila Hashim, Rimfiel B. Janius, Russly Abdul Rahman, Azizah Osman, Zude, Manuela, Shitan, Mahendran
    Pertanika Journal of Science & Technology, 2013;21(1):111-118.
    MyJurnal
    Bananas were chilled at 6oC and the appearance of brown spots when exposed to ambient air, a
    phenomenon known as chilling injury (CI), was detected using computer vision. The system consisted of a digital colour camera for acquiring images, an illumination set-up for uniform lighting, a computer for receiving, storing and displaying of images and software for analyzing the images. The RGB colour space values of the images were transformed into that of HSI colour space which is intuitive to human vision. Visual assessment of CI by means of a browning scale was used as a reference and correlation between this reference values and hue was investigated. Results of the computer vision study successfully demonstrate the potential of the system in substituting visual assessment in the evaluation of CI in bananas. The results indicate significant influence, at α=0.05, of treatment days and temperature on hue. A strong correlation was also found between hue and visual assessment with R>0.85.
    Matched MeSH terms: Lighting
  20. Fulltext Design and Development of a Nearable Wireless System to Control Indoor Air Quality and Indoor Lighting Quality
    Salamone F, Belussi L, Danza L, Galanos T, Ghellere M, Meroni I
    Sensors (Basel), 2017 May 04;17(5).
    PMID: 28471398 DOI: 10.3390/s17051021
    The article describes the results of the project "open source smart lamp" aimed at designing and developing a smart object able to manage and control the indoor environmental quality (IEQ) of the built environment. A first version of this smart object, built following a do-it-yourself (DIY) approach using a microcontroller, an integrated temperature and relative humidity sensor, and techniques of additive manufacturing, allows the adjustment of the indoor thermal comfort quality (ICQ), by interacting directly with the air conditioner. As is well known, the IEQ is a holistic concept including indoor air quality (IAQ), indoor lighting quality (ILQ) and acoustic comfort, besides thermal comfort. The upgrade of the smart lamp bridges the gap of the first version of the device providing the possibility of interaction with the air exchange unit and lighting system in order to get an overview of the potential of a nearable device in the management of the IEQ. The upgraded version was tested in a real office equipped with mechanical ventilation and an air conditioning system. This office was occupied by four workers. The experiment is compared with a baseline scenario and the results show how the application of the nearable device effectively optimizes both IAQ and ILQ.
    Matched MeSH terms: Lighting
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links