Displaying publications 4401 - 4420 of 7301 in total

Abstract:
Sort:
  1. Azali HY, Norly S, Wong LM, Tan KS, Safian NM
    Asian J Surg, 2007 Apr;30(2):138-40.
    PMID: 17475585
    We report an unusual co-existence of Burkholderia pseudomallei and acid fast bacilli in a young Malay gentleman with liver abscess. He was treated with antibiotics and surgical drainage. This phenomenon has not been reported in previous literature and the dilemma of its management is discussed.
  2. Amirah Mohd Napi NN, Ibrahim N, Adli Hanif M, Hasan M, Dahalan FA, Syafiuddin A, et al.
    Bioengineered, 2023 Dec;14(1):2276391.
    PMID: 37942779 DOI: 10.1080/21655979.2023.2276391
    Microplastic (MP) is an emerging contaminant of concern due to its abundance in the environment. Wastewater treatment plant (WWTP) can be considered as one of the main sources of microplastics in freshwater due to its inefficiency in the complete removal of small MPs. In this study, a column-based MP removal which could serve as a tertiary treatment in WWTPs is evaluated using granular activated carbon (GAC) as adsorbent/filter media, eliminating clogging problems commonly caused by powder form activated carbon (PAC). The GAC is characterized via N2 adsorption-desorption isotherm, field emission scanning electron microscopy, and contact angle measurement to determine the influence of its properties on MP removal efficiency. MPs (40-48 μm) removal up to 95.5% was observed with 0.2 g/L MP, which is the lowest concentration tested in this work, but still higher than commonly used MP concentration in other studies. The performance is reduced with further increase in MP concentration (up to 1.0 g/L), but increasing the GAC bed length from 7.5 to 17.5 cm could lead to better removal efficiencies. MP particles are immobilized by the GAC predominantly by filtration process by being entangled with small GAC particles/chips or stuck between the GAC particles. MPs are insignificantly removed by adsorption process through entrapment in GAC porous structure or attachment onto the GAC surface.
  3. Sayuddin ENEN, Taher M, Arzmi MH, Burhanudin NA, Rostam MA
    Arch Oral Biol, 2024 Jan;157:105841.
    PMID: 37952507 DOI: 10.1016/j.archoralbio.2023.105841
    OBJECTIVE: In this article, we review the current studies on the role of podoplanin in oral cancer and the potential application of podoplanin inhibitors as a therapeutic agent for oral cancer.

    DESIGN: The narrative review approach was conducted, providing a comprehensive perspective of related literature. Publications addressing podoplanin and its inhibitors in the context of oral cancer were retrieved from PubMed and Scopus databases.

    RESULTS: Podoplanin has emerged as a biomarker and therapeutic agent for oral cancer. Numerous studies have reported high podoplanin expression in oral cancer and pre-cancerous lesions compared to normal cells. A specific inhibitor targeting podoplanin may have the potential to prevent oral carcinogenesis via interfering with the pathway of cancerous cells involved in cell proliferation and metastasis. Antibodies, chimeric antigen receptor (CAR)-T cells, cancer-specific mAb (CasMab), synthetic molecules, and lectins are among the materials used as anticancer agents targeting podoplanin. Plant-derived lectins appear to demonstrate a unique advantage against alternative candidates.

    CONCLUSIONS: The use of podoplanin inhibitors in place of existing therapeutic approaches could be a promising and novel approach to the prevention and treatment of oral cancer. Nevertheless, further research is required to investigate the practical application of such inhibitors.

  4. Mat Jan NA, Marsani MF, Thiruchelvam L, Zainal Abidin NB, Shabri A, Abdullah Sani SA
    Geospat Health, 2023 Nov 13;18(2).
    PMID: 37961980 DOI: 10.4081/gh.2023.1236
    The occurrence of floods has the potential to escalate the transmission of infectious diseases. To enhance our comprehension of the health impacts of flooding and facilitate effective planning for mitigation strategies, it is necessary to explore the flood risk management. The variability present in hydrological records is an important and neglecting non-stationary patterns in flood data can lead to significant biases in estimating flood quantiles. Consequently, adopting a non-stationary flood frequency analysis appears to be a suitable approach to challenge the assumption of independent and identically distributed observations in the sample. This research employed the generalized extreme value (GEV) distribution to examine annual maximum flood series. To estimate non-stationary models in the flood data, several statistical tests, including the TL-moment method was utilized on the data from ten stream-flow stations in Johor, Malaysia, which revealed that two stations, namely Kahang and Lenggor, exhibited non-stationary behaviour in their annual maximum streamflow. Two non-stationary models efficiently described the data series from these two specific stations, the control of which could reduce outbreak of infectious diseases when used for controlling the development measures of the hydraulic structures. Thus, the application of these models may help prevent biased prediction of flood occurrences leading to lower number of cases infected by disease.
  5. Abdurrahman M, Kamal MS, Ramadhan R, Daniati A, Arsad A, Abdul Rahman AF, et al.
    ACS Omega, 2023 Nov 07;8(44):41004-41021.
    PMID: 37970044 DOI: 10.1021/acsomega.3c04450
    The use of different types of chemicals in upstream oilfield operations is critical for optimizing the different operations involved in hydrocarbon exploration and production. Surfactants are a type chemical that are applied in various upstream operations, such as drilling, fracturing, and enhanced oil recovery. However, due to their nonbiodegradability and toxicity, the use of synthetic surfactants has raised environmental concerns. Natural surfactants have emerged because of the hunt for sustainable and environmentally suitable substitutes. This Review discusses the role of natural surfactants in upstream operations as well as their benefits and drawbacks. The Review discusses the basic characteristics of surfactants, their classification, and the variables that affect their performance. Finally, the Review examines the possible applications of natural surfactants in the upstream oil sector and identifies areas that require further research.
  6. Ali S, Tan SC, Lee CK, Yusoff Z, Haque MR, Mylonas A, et al.
    Sensors (Basel), 2023 Nov 02;23(21).
    PMID: 37960622 DOI: 10.3390/s23218922
    Software-Defined Networking (SDN), which is used in Industrial Internet of Things, uses a controller as its "network brain" located at the control plane. This uniquely distinguishes it from the traditional networking paradigms because it provides a global view of the entire network. In SDN, the controller can become a single point of failure, which may cause the whole network service to be compromised. Also, data packet transmission between controllers and switches could be impaired by natural disasters, causing hardware malfunctioning or Distributed Denial of Service (DDoS) attacks. Thus, SDN controllers are vulnerable to both hardware and software failures. To overcome this single point of failure in SDN, this paper proposes an attack-aware logical link assignment (AALLA) mathematical model with the ultimate aim of restoring the SDN network by using logical link assignment from switches to the cluster (backup) controllers. We formulate the AALLA model in integer linear programming (ILP), which restores the disrupted SDN network availability by assigning the logical links to the cluster (backup) controllers. More precisely, given a set of switches that are managed by the controller(s), this model simultaneously determines the optimal cost for controllers, links, and switches.
  7. Javed MN, Adnan HM, Hanan MA, Sarmiti NZ, Adeeb H, Khan A, et al.
    Heliyon, 2023 Nov;9(11):e21579.
    PMID: 38027868 DOI: 10.1016/j.heliyon.2023.e21579
    The agricultural sector is the backbone and single-largest sector of the Pakistani economy. Pakistan's agricultural productivity is suffering due to climate change. The study aimed at finding how social media reporting can change patterns of attitudes among farmers to cope with sudden weather changes. A correlation-experimental research design was used to find the relationships and effects of climate change on agriculture in Punjab (Pakistan) and the mediating effect of social media reporting. A purposive sampling technique was used to collect samples from 120 male farmers. Online surveys, with the help of Google Docs, were used to collect participants' responses about the type of behavior they used to adopt when getting information about climate change through social media. After determining their reliability and validity through piloting, two self-constructed questionnaires were used: (i) Measuring Farmers' Behavior Influenced by Social Media Reporting of Climate Change and (ii) Effects of Social Media Reporting of Climate Change on Agriculture. Data were analyzed using SPSS-21, and correlation analysis was done to find out the relationship between social media reporting and farmers' behavior. Linear regression was used to measure the functional relationship between social media reporting about climate change and farmers' attitudes towards adopting precautions to increase annual yield. The coefficient of social media reporting was positively and significantly related to farmers' attitudes towards the selection of crops, land management, and water storage. Based on the findings, the social media reports significantly predicted patterns of farmers' behavior towards the adaptation of advanced measures to select crops, reduce pest attacks, manage land, and store water.
  8. Ahmad NI, Kar YB, Doroody C, Kiong TS, Rahman KS, Harif MN, et al.
    Heliyon, 2023 Nov;9(11):e21622.
    PMID: 38027707 DOI: 10.1016/j.heliyon.2023.e21622
    Recent advancements in CdTe solar cell technology have introduced the integration of flexible substrates, providing lightweight and adaptable energy solutions for various applications. Some of the notable applications of flexible solar photovoltaic technology include building integrated photovoltaic systems (BIPV), transportation, aerospace, satellites, etc. However, despite this advancement, certain issues regarding metal and p-CdTe remained unresolved. Besides, the fabrication of a full-working device on flexible glass is challenging and requires special consideration due to the unstable morphology and structural properties of deposited film on ultra-thin glass substrates. The existing gap in knowledge about the vast potential of flexible CdTe solar cells on UTG substrates and their possible applications blocks their full capacity utilization. Hence, this comprehensive review paper exclusively concentrates on the obstacles associated with the implementation of CdTe solar cells on UTG substrates with a potential back surface field (BSF) layer. The significance of this study lies in its meticulous identification and analysis of the substantial challenges associated with integrating flexible CdTe onto UTG substrates and leveraging Cu-doped ZnTe as a potential BSF layer to enhance the performance of flexible CdTe solar cells.
  9. Isah M, Doroody C, Rahman KS, Harif MN, Kiong TS, Zuhdi AWM
    Heliyon, 2023 Nov;9(11):e21536.
    PMID: 38027560 DOI: 10.1016/j.heliyon.2023.e21536
    The study used magnetron sputtering to investigate the growth of cadmium telluride (CdTe) thin films on surface treated n-type silicon (n-Si) substrates. The n-Si substrates were textured using potassium hydroxide (KOH) before the sputter deposition of CdTe. This was followed by cadmium chloride treatment to reduce the strain at the interface of CdTe and Si, which is caused by the incompatible lattice and thermal expansion mismatch (CTE). X-ray diffraction (XRD) analysis showed that the lowest FWHM and dislocation densities were obtained for CdCl2/CdTe/txt-nSi, which aligns with the scanning electron microscopy (SEM) results. In the SEM images, the interface bonding between the CdTe and Si surfaces was visible in the cross-sections, and the top-view images revealed sputtered CdTe thin films conforming to the patterns of pyramidal textured Si as an engineered surface to capture more light to maximize absorption in the CdTe/Si tandem design. The Energy dispersive X-ray (EDX) results showed that all the CdTe deposited on textured n-Si exhibited more Te atoms than Cd atoms, irrespective of the CdCl2 treatment. The presented results suggest that the texturization and CdCl2 treatment improved the morphology and grain boundary passivation of the sputtered CdTe. The adhesiveness of CdTe on the n-Si substrate was also significantly enhanced. Our findings further demonstrate that proper surface treatment of the Si substrate can greatly improve the quality of CdTe grown on Si by reducing the strain that occurs during the growth process. This study demonstrates a valuable method for enhancing the integration of CdTe with Si for two-junction tandem solar cell applications.
  10. Khan MN, Jan AA, Asif M, Lai FW, Shad MK, Shadab S
    Heliyon, 2023 Dec;9(12):e22848.
    PMID: 38076083 DOI: 10.1016/j.heliyon.2023.e22848
    PURPOSE: Innovation activities have gained much importance due to their pivotal role in achieving economic growth - directly by increasing productivity and - indirectly by increasing the degree of trade openness. This study aims to focus on the indirect channel, a rarely explored area of research, especially in the context of emerging economies.

    METHODOLOGY: To achieve the aim of the study, four proxies of innovation (resident patent applications, nonresident patent applications, scientific and technical journal articles, and research and development expenditures) are used to establish a robust relationship between innovation activities and trade openness in BRICS economies. Panel data from 2000 to 2020 is obtained from World Development Indicators and Penn World Tables. Econometric techniques of panel data such as fixed effect and generalized least squares are employed to extract results from the specified models.

    FINDINGS: The findings of the study revealed that three proxies of innovation (i.e., resident patent applications, nonresident patent applications, scientific and technical journal articles) have a significant positive role in improving trade openness in the BRICS economies. However, the fourth proxy of innovation i.e., research and development expenditures had a negative impact on the degree of trade openness. Besides, innovation activities such as inflation rate and foreign direct investment have also influenced the degree of trade openness positively and significantly. Conversely, GDP per capita had a negative relationship with trade openness. Moreover, domestic investments showed a positive influence on the degree of trade openness while employment had a negative and insignificant influence on the degree of trade openness. Finally, the causality analysis revealed a one-way relationship running from innovations to trade openness.

    IMPLICATIONS: In view of the results obtained, the policymakers of the BRICS economies might focus on encouraging innovation activities to enhance the degree of trade openness. Increased trade openness will consequently contribute to economic growth enormously and thus the attainment of sustainable development goals (SDG-8). Policymakers are also suggested to encourage FDI inflows and further ensure a moderate inflation rate to improve the degree of trade openness and hence accelerate economic growth.

    ORIGINALITY: This study focused on examining the nexus between innovation activities and trade openness in emerging economies, which is indeed an interesting but rarely explored area of research. The findings of the study might help the policymakers of the BRICS economies in formulating policies regarding trade openness and innovation activities.

  11. Amran S, Salleh MZM, Hizaddin HF, Luthfi AAI, Alhadid A, Hadj-Kali MK
    Molecules, 2023 Dec 16;28(24).
    PMID: 38138617 DOI: 10.3390/molecules28248129
    The conventional hydrodenitrogenation method is expensive and involves the use of catalysts and harsh procedures. In the last few years, ionic liquids (ILs) have gained attention as a promising alternative solvent for fuel oil extractive denitrogenation. In this work, the Conductor-like Screening Model for Real Solvents (COSMO-RS) was used to screen 173 potential ILs as solvents for fuel oil. Two ILs (1-ethyl-3-methylimidazolium dicyanamide ([EMIM][N(CN)2]) and 1-ethyl-3-methylimidazolium methanesulfonate ([EMIM][MeSO3])) were selected for experimental investigation. The experimental liquid-liquid extraction of pyrrole (taken as the model nitrogen compound) from n-hexadecane (the model fuel) was conducted at 298 K and 1 atm with feed concentrations of pyrrole ranging from 10 to 50 wt%, using either the two pure ILs or their mixtures with dimethylformamide or ethylene glycol. Moreover, the NRTL model was effectively used to correlate the experimental tie lines. This work shows that the use of a binary mixture of ILs with a conventional solvent results in good selectivity, but has a low capacity for extracting pyrrole compounds. On the other hand, using an IL-IL mixture exhibits good results for both capacity and selectivity. All the ternary systems tested showed positive slopes, indicating that the nitrogen compounds had a higher affinity for the IL and binary mixture extract phase. In fact, the extraction efficiency for all the systems shows promising results. This characteristic is advantageous, as it requires less solvent to remove nitrogen compounds.
  12. Ahmad T, Kumar N, Kumar A, Mubashir M, Bokhari A, Paswan BK, et al.
    Environ Res, 2024 Mar 15;245:117960.
    PMID: 38135098 DOI: 10.1016/j.envres.2023.117960
    Carbon capture technologies are becoming increasingly crucial in addressing global climate change issues by lowering CO2 emissions from industrial and power generation activities. Post-combustion carbon capture, which uses membranes instead of adsorbents, has emerged as one of promising and environmentally friendly approaches among these technologies. The operation of membrane technology is based on the premise of selectively separating CO2 from flue gas emissions. This provides a number of different benefits, including improved energy efficiency and decreased costs of operation. Because of its adaptability to changing conditions and its low impact on the surrounding ecosystem, it is an appealing choice for a diverse array of uses. However, there are still issues to be resolved, such as those pertaining to establishing a high selectivity, membrane degradation, and the costs of the necessary materials. In this article, we evaluate and explore the prospective applications and roles of membrane technologies to control climate change by post-combustion carbon capturing. The primary proposition suggests that the utilization of membrane-based carbon capture has the potential to make a substantial impact in mitigating CO2 emissions originating from industrial and power production activities. This is due to its heightened ability to selectively absorb carbon, better efficiency in energy consumption, and its flexibility to various applications. The forthcoming challenges and potential associated with the application of membranes in post-carbon capture are also discussed.
  13. I Yahya S, Zubir F, Nouri L, Yusoff Z, Chaudhary MA, Assaad M, et al.
    PLoS One, 2023;18(12):e0296272.
    PMID: 38134045 DOI: 10.1371/journal.pone.0296272
    Microstrip couplers play a crucial role in signal processing and transmission in various applications, including RF and wireless communication, radar systems, and satellites. In this work, a novel microstrip 180° coupler is designed, fabricated and measured. The layout configuration of this coupler is completely new and different from the previously reported Rat-race, branch-line and directional couplers. To obtain the proposed coupler, the meandrous coupled lines are used and analyzed mathematically. To improve the performance of our coupler, an optimization method is used. The designed coupler is very compact with an overall size of 0.014λg2. The obtained values of S21 and S31 are -3.45 dB and -3.75 dB, respectively at the operating frequency, while the fractional bandwidth (FBW) is 56.2%. It operates at fo = 1.61 GHz (suitable for 5G applications) and can suppress harmonics up to 2.17fo. Another advantage of this coupler is its low phase imbalance, while the phase difference between S21 and S31 is 180°± 0.023°. Therefore, our device is a balanced coupler with ±0.3 dB magnitude unbalance at its operating frequency. It is important to note that it is very difficult to find a coupler that has all these advantages at the same time. The proposed 180° coupler is fabricated and measured. The comparison shows that the measurement and simulation results are in good agreement. Therefore, the proposed coupler can be easily used in designing high-performance 5G communication systems.
  14. Ahmad MS, Asban MA, Mohd Salleh NSA, Mohd Sarmin N', Abd Rahman ANA
    Spec Care Dentist, 2023;43(6):815-823.
    PMID: 36018716 DOI: 10.1111/scd.12770
    INTRODUCTION: Interprofessional education (IPE), which is aimed at improving the quality of patient care and overall health outcome, has been advocated to prepare future healthcare professionals for collaborative practice OBJECTIVES: This study aimed to investigate the perceptions of IPE among clinical healthcare students at a Malaysian institution METHODS: A validated questionnaire, developed from previous studies, was distributed online to selected final year students of 10 clinical programs from medical, dental, pharmacy and health sciences faculties (n = 501). Quantitative data was analyzed via chi-square test (significance value p 
  15. Rosli MA, Mohd Nasir NA, Mustafa MZ, Othman MA, Zakaria Z, Halim AS
    J Taibah Univ Med Sci, 2024 Feb;19(1):209-219.
    PMID: 38124990 DOI: 10.1016/j.jtumed.2023.11.003
    PURPOSE: Kelulut honey contains trehalulose and has high antioxidant content, such as phenolic and flavonoid substances, which can promote wound healing. This study evaluated the effectiveness of Kelulut honey in diabetic wound healing compared to a commercially available conventional gel dressing (Intrasite gel).

    METHODS: A prospective, randomized, single-blinded control trial was performed on eligible diabetic patients with full-thickness cavity wounds. Patients' demographics, size and site of wounds, and baseline routine blood investigations were recorded. The wounds were dressed every other day with Kelulut honey for the intervention group or gel for the control group. The wound size reduction and granulation tissue formation percentage were calculated every 6 days for 1 month.

    RESULTS: Seventy-one patients were randomized. After 30 days of follow-up, 62 participants were available for analysis: 30 from the control group and 32 from the treatment group. The control group had increased granulation tissue at baseline and more wounds on the lower limb and posterior trunk. Both groups showed an increasing mean and median percentage of wound epithelialization and granulation tissue over time, with significantly higher values at every timepoint in the honey group (p 

  16. Ahmad SM, Mat Jin N, Ahmad MF, Abdul Karim AK, Abu MA
    Horm Mol Biol Clin Investig, 2023 Dec 01;44(4):379-384.
    PMID: 38124670 DOI: 10.1515/hmbci-2022-0087
    OBJECTIVES: Unexplained subfertility (UEI) describes a couple whose standard subfertility workout consider acceptable but unable to conceived.

    METHODS: This retrospective study was conducted in the Advanced Reproductive Centre, UKM Hospital, Kuala Lumpur, from January 2016 to December 2019. The data of 268 UEI couples were obtained from the clinical database. Women aged 21-45 years old was included and further divided into four groups according to the female partner's age and subfertility duration: group A (age <35 years and subfertility <2 years), group B (age <35 years and subfertility >2 years), group C (age >35 years and subfertility <2 years), and group D (age >35 years and subfertility <2 years). All statistical analyses were performed using SPSS 22.0 for Windows.

    RESULTS: A total of 255 cases were included in this study. The mean age of the women was 32.9 ± 4.04 years, and the mean subfertility duration was 5.04 ± 2.9 years. A total of 51 (20 %) cases underwent timed sexual intercourse, 147 (57.6 %) cases had intrauterine insemination (IUI), whereas 57 (22.4 %) cases opted for in vitro fertilization (IVF). A total of 204 cases underwent active management (IUI/IVF), which showed a significant difference (p<0.05). Out of eight clinical pregnancies, half of them were from group B.

    CONCLUSIONS: Active management in younger women with a shorter subfertility duration revealed a better pregnancy outcome. Otherwise, individualized treatment should be considered in selecting a suitable treatment plan.

  17. Sadikan MZ, Abdul Nasir NA, Bakar NS, Iezhitsa I, Agarwal R
    BMC Complement Med Ther, 2023 Jun 02;23(1):179.
    PMID: 37268913 DOI: 10.1186/s12906-023-04005-9
    BACKGROUND: Diabetic retinopathy (DR) is the second commonest microvascular complication of diabetes mellitus. It is characterized by chronic inflammation and angiogenesis. Palm oil-derived tocotrienol-rich fraction (TRF), a substance with anti-inflammatory and anti-angiogenic properties, may provide protection against DR development. Therefore, in this study, we investigated the effect of TRF on retinal vascular and morphological changes in diabetic rats. The effects of TRF on the retinal expression of inflammatory and angiogenic markers were also studied in the streptozotocin (STZ)-induced diabetic rats.

    METHODS: Male Sprague Dawley rats weighing 200-250 g were grouped into normal rats (N) and diabetic rats. Diabetes was induced by intraperitoneal injection of streptozotocin (55 mg/kg body weight) whereas N similarly received citrate buffer. STZ-injected rats with blood glucose of more than 20 mmol/L were considered diabetic and were divided into vehicle-treated (DV) and TRF-treated (DT) groups. N and DV received vehicle, whereas DT received TRF (100 mg/kg body weight) via oral gavage once daily for 12 weeks. Fundus images were captured at week 0 (baseline), week 6 and week 12 post-STZ induction to estimate vascular diameters. At the end of experimental period, rats were euthanized, and retinal tissues were collected for morphometric analysis and measurement of NFκB, phospho-NFκB (Ser536), HIF-1α using immunohistochemistry (IHC) and enzyme-linked immunosorbent assay (ELISA). Retinal inflammatory and angiogenic cytokines expression were measured by ELISA and real-time quantitative PCR.

    RESULTS: TRF preserved the retinal layer thickness (GCL, IPL, INL and OR; p 

  18. Mustafa ZU, Maqbool F, Wahid M, Salman M, Haroon S, Khan YH, et al.
    Rev Soc Bras Med Trop, 2023;56:e0044.
    PMID: 37283345 DOI: 10.1590/0037-8682-0044-2023
    BACKGROUND: Safety and efficacy concerns regarding coronavirus disease 2019 (COVID-19) vaccines are common among the public and have a negative impact on their uptake. We aimed to report the adverse effects currently associated with the vaccine in Pakistan to build confidence among the population for its adoption.

    METHODS: A cross-sectional study was conducted in five districts of the Punjab province of Pakistan between January and March 2022. The participants were recruited using convenience sampling. All data were analyzed using SPSS 22.

    RESULTS: We recruited 1622 people with the majority aged between 25-45 years. Of these, 51% were female, including 27 pregnant women and 42 lactating mothers. Most participants had received the Sinopharm (62.6%) or Sinovac (17.8%) vaccines. The incidences of at least one side effect after the first (N = 1622), second (N = 1484), and booster doses (N = 219) of the COVID-19 vaccine were 16.5%, 20.1%, and 32%, respectively. Inflammation/erythema at the injection site, pain at the injection site, fever, and bone/muscle pain were common side effects of vaccination. No significant differences were observed in the adverse effect scores between all demographic variables except for pregnancy (P = 0.012) after the initial dose. No significant association was observed between any variable and the side effect scores of the second and booster doses of the vaccine.

    CONCLUSIONS: Our study showed a 16-32% prevalence of self-reported side effects after the first, second, and booster COVID-19 vaccinations. Most adverse effects were mild and transient, indicating the safety of different COVID-19 vaccines.

  19. Khalil MA, Yong WH, Islam MT, Hoque A, Islam MS, Leei CC, et al.
    Sci Rep, 2023 May 05;13(1):7373.
    PMID: 37147337 DOI: 10.1038/s41598-023-34514-z
    Metamaterials have gained much attention due to their exciting characteristics and potential uses in constructing valuable technologies. This paper presents a double negative square resonator shape metamaterial sensor to detect the material and its thickness. An innovative double-negative metamaterial sensor for microwave sensing applications is described in this paper. It has a highly sensitive Q-factor and has good absorption characteristics approximately equal to one. For the metamaterial sensor, the recommended measurement is 20 by 20 mm. Computer simulation technology (C.S.T.) microwave studios are used to design the metamaterial structure and figure out its reflection coefficient. Various parametric analyses have been performed to optimize the design and size of the structure. The experimental and theoretical results are shown for a metamaterial sensor that is attached to five different materials such as, Polyimide, Rogers RO3010, Rogers RO4350, Rogers RT5880, and FR-4. A sensor's performance is evaluated using three different thicknesses of FR-4. There is a remarkable similarity between the measured and simulated outcomes. The sensitivity values for 2.88 GHz and 3.5 GHz are 0.66% and 0.19%, respectively, the absorption values for both frequencies are 99.9% and 98.9%, respectively, and the q-factor values are 1413.29 and 1140.16, respectively. In addition, the figure of merit (FOM) is analyzed, and its value is 934.18. Furthermore, the proposed structure has been tested against absorption sensor applications for the purpose of verifying the sensor's performance. With a high sense of sensitivity, absorption, and Q-factor, the recommended sensor can distinguish between thicknesses and materials in various applications.
  20. Yussof NS, Ping TC, Boon TT, Utra U, Ramli ME
    Food Technol Biotechnol, 2023 Mar;61(1):39-50.
    PMID: 37200792 DOI: 10.17113/ftb.61.01.23.7538
    RESEARCH BACKGROUND: Various approaches have been used to present functional lipids including lycopene in a palatable food form to consumers. However, being highly hydrophobic, lycopene is insoluble in aqueous systems and has a limited bioavailability in the body. Lycopene nanodispersion is expected to improve the properties of lycopene, but its stability and bioaccessibility are also affected by emulsifier type and environmental conditions such as pH, ionic strength and temperature.

    EXPERIMENTAL APPROACH: The influence of soy lecithin, sodium caseinate and soy lecithin/sodium caseinate at 1:1 ratio on the physicochemical properties and stability of lycopene nanodispersion prepared using the emulsification-evaporation methods before and after treatment at different pH, ionic strength and temperature were investigated. The in vitro bioaccessibility of the nanodispersions was also studied.

    RESULTS AND CONCLUSION: Under neutral pH conditions, nanodispersion stabilized with soy lecithin had the highest physical stability and the smallest particle size (78 nm), the lowest polydispersity index (PDI) value (0.180) and highest zeta potential (-64 mV) but the lowest lycopene concentration (1.826 mg/100 mL). Conversely, nanodispersion stabilized with sodium caseinate had the lowest physical stability. Combining the soy lecithin with sodium caseinate at 1:1 ratio resulted in a physically stable lycopene nanodispersion with the highest lycopene concentration (2.656 mg/100 mL). The lycopene nanodispersion produced by soy lecithin also had high physical stability under different pH range (pH=2-8) where the particle size, PDI and zeta potential remained fairly consistent. The nanodispersion containing sodium caseinate was unstable and droplet aggregation occurred when the pH was reduced close to the isoelectric point of sodium caseinate (pH=4-5). The particle size and PDI value of nanodispersion stabilized with soy lecithin and sodium caseinate mixture increased sharply when the NaCl concentration increased above 100 mM, while the soy lecithin and sodium caseinate counterparts were more stable. All of the nanodispersions showed good stability with respect to temperature changes (30-100 °C) except for the one stabilized by sodium caseinate, which exhibited an increased particle size when heated to above 60 °C. The combination of soy lecithin and sodium caseinate was found to increase the bioaccessibility of the lycopene nanodispersion. The physicochemical properties, stability and extent of the lycopene nanodispersion digestion highly depend on the emulsifier type.

    NOVELTY AND SCIENTIFIC CONTRIBUTION: Producing a nanodispersion is considered one of the best ways to overcome the poor water solubility, stability and bioavailability issues of lycopene. Currently, studies related to lycopene-fortified delivery systems, particularly in the form of nanodispersion, are still limited. The information obtained on the physicochemical properties, stability and bioaccessibility of lycopene nanodispersion is useful for the development of an effective delivery system for various functional lipids.

Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links