Displaying publications 441 - 460 of 668 in total

Abstract:
Sort:
  1. Oginawati K, Susetyo SH, Rosalyn FA, Kurniawan SB, Abdullah SRS
    Environ Sci Pollut Res Int, 2021 Mar;28(11):14000-14008.
    PMID: 33201502 DOI: 10.1007/s11356-020-11590-6
    Chromium (Cr) is used as a mixture to improve strength and corrosion resistance. Milling and welding processes can expose workers to Cr through dermal exposure and inhalation. Cr exposure can be determined by urine testing. The purpose of this study was to analyze the concentration of Cr in urine (UCr) of workers. This study was carried out using a cross-sectional method. Sampling was conducted in the village of Mekarmaju, Bandung, Indonesia. The number of respondents included 30 blacksmiths, and the control group comprised 10 people who were not blacksmiths. Cr6+ exposure was measured using a personal sampling pump placed on the collar of the worker's shirt as a breathing zone and then analyzed using a UV-visible spectrophotometer. UCr was measured with a graphite furnace atomic absorption spectrophotometer. The measured Cr6+ concentration in the exposed working area ranged from 0.03 to 0.63 mg/m3, whereas that in non-exposed area ranged from 0.02 to 0.04 mg/m3. Results showed that 16 out of 30 blacksmiths had a UCr concentration above the biological exposure index (BEI) value, 21 had a higher value than the threshold limit value (TLV), and 22 had hazard index (HI) values > 1, which indicated that Cr has a hazardous potential in the body. The analysis of the exposed and control groups showed a significant difference with a p value of 0.000 for TLV, chronic daily intake, and UCr. These results clearly showed that Cr6+ exposure may harm the health of these workers in the future. The results obtained in this study can be used to promote workers' awareness on the potential health risk caused by Cr6+ exposure in the working environment.
  2. Lai SY, Ng KH, Cheng CK, Nur H, Nurhadi M, Arumugam M
    Chemosphere, 2021 Jan;263:128244.
    PMID: 33297191 DOI: 10.1016/j.chemosphere.2020.128244
    Photocatalytic remediation of industrial water pollution has courted intense attention lately due to its touted green approach. In this respect, Keggin-based polyoxometalates (POMs) as green solid acids in photocatalytic reaction possess superior qualities, viz. unique photoinduced charge-transfer properties, strong photooxidative-photoreductive ability, high chemical and thermal stability, and so forth. Unfortunately, it suffers from a large bandgap energy, low specific surface area, low recoverability, and scarce utilization in narrow absorption range. Therefore, the pollutant degradation performance is not satisfactory. Consequently, multifarious research to enhance the photocatalytic performance of Keggin-based POMs were reported, viz. via novel modifications and functionalizations through a variety of materials, inclusive of, inter alia, metal oxides, transition metals, noble metals, and others. In order to advocate this emerging technology, current review work provides a systematic overview on recent advancement, initiated from the strategized synthetic methods, followed by hierarchical enhancement and intensification process, at the same time emphasizes on the fundamental working principles of Keggin-based POM nanocomposites. By reviewing and summarizing the efforts adopted global-wide, this review is ended with providing useful outlooks for future studies. It is also anticipated to shed light on producing Keggin-based POM nanocomposites with breakthrough visible- and solar-light-driven photocatalytic performance against recalcitrant organic waste.
  3. Mohamad E, Tham JS, Ayub SH, Hamzah MR, Hashim H, Azlan AA
    J Med Internet Res, 2020 11 12;22(11):e23922.
    PMID: 33151897 DOI: 10.2196/23922
    BACKGROUND: There are multiple media platforms and various resources available for information on COVID-19. Identifying people's preferences is key to building public confidence and planning for successful national health intervention strategies.

    OBJECTIVE: This study examines the sources of information for COVID-19 used by the Malaysian public and identifies those that are associated with building public confidence and positive perceptions toward the Malaysian government.

    METHODS: A cross-sectional online survey of 4850 Malaysian residents was conducted. Participant demographics, media use, information sources, and attitudes surrounding COVID-19 were assessed. Descriptive statistics and multiple logistic regression analyses were conducted to gauge the relationship between demographics, information sources, and attitudes toward COVID-19.

    RESULTS: Malaysians primarily used television and internet news portals to access information on COVID-19. The Malaysian Ministry of Health was the most preferred source of COVID-19 information. Respondents who referred to the Ministry of Health, television, and the Malaysian National Security Council for information were more likely to believe that the country could win the battle against COVID-19 and that the government was handling the health crisis well compared to those who referred to other information sources. Those who used the World Health Organization, friends, YouTube, family, and radio as sources of information were less likely to harbor confidence and positive belief toward combating COVID-19.

    CONCLUSIONS: Managing information and sustaining public confidence is important during a pandemic. Health authorities should pay considerable attention to the use of appropriate media channels and sources to allow for more effective dissemination of critical information to the public.

  4. Arumugam AC, Agharbaoui FE, Khazali AS, Yusof R, Abd Rahman N, Ahmad Fuaad AAH
    J Biomol Struct Dyn, 2020 Dec 31.
    PMID: 33382015 DOI: 10.1080/07391102.2020.1866074
    Dengue virus (DV) infection is one of the main public health concerns, affecting approximately 390 million people worldwide, as reported by the World Health Organization. Yet, there is no antiviral treatment for DV infection. Therefore, the development of potent and nontoxic anti-DV, as a complement for the existing treatment strategies, is urgently needed. Herein, we investigate a series of small peptides inhibitors of DV antiviral activity targeting the entry process as the promising strategy to block DV infection. The peptides were designed based on our previously reported peptide sequence, DN58opt (TWWCFYFCRRHHPFWFFYRHN), to identify minimal effective inhibitory sequence through molecular docking and dynamics studies. The in silico designed peptides were synthesized using conventional Fmoc solid-phase peptide synthesis chemistry, purified by RP-HPLC and characterized using LCMS. Later, they were screened for their antiviral activity. One of the peptides, AC 001, was able to reduce about 40% of DV plaque formation. This observation correlates well with the molecular mechanics-Poisson-Boltzmann surface area (MM-PBSA) analysis - AC 001 showed the most favorable binding affinity through 60 ns simulations. Pairwise residue decomposition analysis has revealed four key residues that contributed to the binding of these peptides into the DV2 E protein pocket. This work identifies the minimal peptide sequence required to inhibit DV replication and explains the behavior observed on an atomic level using computational study.Communicated by Ramaswamy H. Sarma.
  5. Parham S, Kharazi AZ, Bakhsheshi-Rad HR, Nur H, Ismail AF, Sharif S, et al.
    Antioxidants (Basel), 2020 Dec 21;9(12).
    PMID: 33371338 DOI: 10.3390/antiox9121309
    Recently, increasing public concern about hygiene has been driving many studies to investigate antimicrobial and antiviral agents. However, the use of any antimicrobial agents must be limited due to their possible toxic or harmful effects. In recent years, due to previous antibiotics' lesser side effects, the use of herbal materials instead of synthetic or chemical drugs is increasing. Herbal materials are found in medicines. Herbs can be used in the form of plant extracts or as their active components. Furthermore, most of the world's populations used herbal materials due to their strong antimicrobial properties and primary healthcare benefits. For example, herbs are an excellent material to replace nanosilver as an antibiotic and antiviral agent. The use of nanosilver involves an ROS-mediated mechanism that might lead to oxidative stress-related cancer, cytotoxicity, and heart diseases. Oxidative stress further leads to increased ROS production and also delays the cellular processes involved in wound healing. Therefore, existing antibiotic drugs can be replaced with biomaterials such as herbal medicine with high antimicrobial, antiviral, and antioxidant activity. This review paper highlights the antibacterial, antiviral, and radical scavenger (antioxidant) properties of herbal materials. Antimicrobial activity, radical scavenger ability, the potential for antimicrobial, antiviral, and anticancer agents, and efficacy in eliminating bacteria and viruses and scavenging free radicals in herbal materials are discussed in this review. The presented herbal antimicrobial agents in this review include clove, portulaca, tribulus, eryngium, cinnamon, turmeric, ginger, thyme, pennyroyal, mint, fennel, chamomile, burdock, eucalyptus, primrose, lemon balm, mallow, and garlic, which are all summarized.
  6. Lai LW, Roslani AC, Yan YW, Bhojwani KM, Jamaluddin MFH
    ANZ J Surg, 2021 05;91(5):896-901.
    PMID: 33522667 DOI: 10.1111/ans.16567
    BACKGROUND: Conventional mass closure uses suture-to-wound length ratio of 4:1 ('long stitch', LS). 'Short stitch' (SS) has a suture-to-wound length ratio of more than 4 and incorporates only the linea alba, which may reduce tension and pain. We compared the post-operative pain after laparotomy closure using LS and SS.

    METHODS: Patients undergoing elective midline laparotomy through standardized incisions in two tertiary hospitals from February 2017 to September 2018 were randomized to either LS or SS. The primary outcome was post-operative patient-controlled analgesia morphine usage at 24 h. Secondary outcomes were presence of surgical site infection and length of hospital stay (LOHS). Categorical variables were analysed using chi-squared analysis. Outcomes of study were tested for normal distribution. Skewed data were analysed using Mann-Whitney U-test.

    RESULTS: Eighty-six patients were recruited (42 SS and 44 LS). The median age was 66 (interquartile range (IQR) 15). Majority were males (62.8%) and Chinese (50%). The median incision length was 17 cm in both groups. The median patient-controlled analgesia morphine usage 24 h post-operatively did not differ significantly (SS 21 mg, IQR 28.3; LS 18.5 mg, IQR 33.8, P = 0.829). The median pain score at rest (SS 1, IQR 1; LS 1, IQR 2, P = 0.426) and movement (SS 3, IQR 1; LS 3, IQR 2, P = 0.307) did not differ significantly. LOHS was shorter in the SS group (SS 6, IQR 4; LS 8, IQR 5, P = 0.034). The rate of surgical site infection trended lower in the SS group with no statistical difference.

    CONCLUSION: There were no differences in post-operative pain between SS and LS but we found that there were shorter LOHS in SS arm as secondary outcome.

  7. Yahaya N, Sanagi MM, Abd Aziz N, Wan Ibrahim WA, Nur H, Loh SH, et al.
    Biomed Chromatogr, 2017 Feb;31(2).
    PMID: 27474795 DOI: 10.1002/bmc.3803
    A rapid dispersive micro-solid phase extraction (D-μ-SPE) combined with LC/MS/MS method was developed and validated for the determination of ketoconazole and voriconazole in human urine and plasma samples. Synthesized mesoporous silica MCM-41 was used as sorbent in d-μ-SPE of the azole compounds from biological fluids. Important D-μ-SPE parameters, namely type desorption solvent, extraction time, sample pH, salt addition, desorption time, amount of sorbent and sample volume were optimized. Liquid chromatographic separations were carried out on a Zorbax SB-C18 column (2.1 × 100 mm, 3.5 μm), using a mobile phase of acetonitrile-0.05% formic acid in 5 mm ammonium acetate buffer (70:30, v/v). A triple quadrupole mass spectrometer with positive ionization mode was used for the determination of target analytes. Under the optimized conditions, the calibration curves showed good linearity in the range of 0.1-10,000 μg/L with satisfactory limit of detection (≤0.06 μg/L) and limit of quantitation (≤0.3 μg/L). The proposed method also showed acceptable intra- and inter-day precisions for ketoconazole and voriconazole from urine and human plasma with RSD ≤16.5% and good relative recoveries in the range 84.3-114.8%. The MCM-41-D-μ-SPE method proved to be rapid and simple and requires a small volume of organic solvent (200 μL); thus it is advantageous for routine drug analysis.
  8. Asha'ari ZA, Rahman JA, Mohamed AH, Abdullah K, Leman WI
    JAMA Otolaryngol Head Neck Surg, 2017 03 01;143(3):239-246.
    PMID: 27893073 DOI: 10.1001/jamaoto.2016.3268
    Importance: In patients with obstructive sleep apnea (OSA), operative risks depend on the severity of the underlying OSA and the invasiveness of the surgical procedure.

    Objective: To investigate the nature of the associations between the severity of OSA and the number and anatomical sites of upper airway operations with operative complications.

    Design, Setting, and Participants: This retrospective study included adult patients diagnosed with OSA (apnea-hypopnea index [AHI], >5) who underwent upper airway surgery at a single tertiary referral hospital between October 1, 2008, and October 1, 2015.

    Interventions: All patients underwent single or combination surgery on the nose, palatopharyngeal (tonsils, adenoids, and soft palate), and tongue base as a treatment of OSA.

    Main Outcomes and Measures: Pulmonary, surgical, and cardiovascular complications within the first 30 postoperative days were analyzed according to OSA severity and types of upper airway surgery. Logistic regression was used to assess the multivariable association of OSA, age, sex, body mass index, medical comorbidities, and types of upper airway surgery with short-term operative complications.

    Results: The study included 95 patients (87 males [91.6%]; 83 were Malay [87.4%]; mean [SD] age, 37.7 [1.6] years) with complete data and follow-up who underwent upper airway surgery to treat OSA. Patients with more severe OSA had greater body mass index (Cohen d, 0.27; 95% CI, -0.28 to 0.82), longer surgical time (Cohen d, 1.57; 95% CI, 0.95-2.15), and older age (Cohen d, 3.06; 95% CI, 2.29-3.77). At least 1 operative complication occurred in 48 of 95 patients (51%). In a multivariable model, the overall complication rate was increased with age and body mass index. Complication rates were not associated with AHI severity, type of procedure performed, and whether the surgery was single or combination surgery. Lowest oxygen desaturation (odds ratio, 1.03; 95% CI, 0.96-1.45; P = .04) and longest apnea duration (odds ratio, 1.03; 95% CI, 0.99-1.08; P = .02) were polysomnographic variables that predict the short-term operative complications.

    Conclusions and Relevance: In patients with OSA undergoing upper airway surgery, the severity of OSA as assessed by AHI, and the sites and numbers of concurrent operations performed were not associated with the rate of short-term operative complications.

  9. Al Husaini MAS, Habaebi MH, Gunawan TS, Islam MR, Elsheikh EAA, Suliman FM
    Neural Comput Appl, 2021 Aug 07.
    PMID: 34393379 DOI: 10.1007/s00521-021-06372-1
    Breast cancer is one of the most significant causes of death for women around the world. Breast thermography supported by deep convolutional neural networks is expected to contribute significantly to early detection and facilitate treatment at an early stage. The goal of this study is to investigate the behavior of different recent deep learning methods for identifying breast disorders. To evaluate our proposal, we built classifiers based on deep convolutional neural networks modelling inception V3, inception V4, and a modified version of the latter called inception MV4. MV4 was introduced to maintain the computational cost across all layers by making the resultant number of features and the number of pixel positions equal. DMR database was used for these deep learning models in classifying thermal images of healthy and sick patients. A set of epochs 3-30 were used in conjunction with learning rates 1 × 10-3, 1 × 10-4 and 1 × 10-5, Minibatch 10 and different optimization methods. The training results showed that inception V4 and MV4 with color images, a learning rate of 1 × 10-4, and SGDM optimization method, reached very high accuracy, verified through several experimental repetitions. With grayscale images, inception V3 outperforms V4 and MV4 by a considerable accuracy margin, for any optimization methods. In fact, the inception V3 (grayscale) performance is almost comparable to inception V4 and MV4 (color) performance but only after 20-30 epochs. inception MV4 achieved 7% faster classification response time compared to V4. The use of MV4 model is found to contribute to saving energy consumed and fluidity in arithmetic operations for the graphic processor. The results also indicate that increasing the number of layers may not necessarily be useful in improving the performance.
  10. Zainal Abidin NA, Abdul Wahab AH, Abdul Rahim RA, Abdul Kadir MR, Ramlee MH
    Med Biol Eng Comput, 2021 Sep;59(9):1945-1960.
    PMID: 34392448 DOI: 10.1007/s11517-021-02419-6
    Complication rates of anterior cruciate ligament reconstruction (ACL-R) were reported to be around 15% although it is a common arthroscopic procedure with good outcomes. Breakage and migration of fixators are still possible even months after surgery. A fixator with optimum stability can minimise those two complications. Factors that affect the stability of a fixator are its configuration, material, and design. Thus, this paper aims to analyse the biomechanical effects of different types of fixators (cross-pin, interference screw, and cortical button) towards the stability of the knee joint after ACL-R. In this study, finite element modelling and analyses of a knee joint attached with double semitendinosus graft and fixators were carried out. Mimics and 3-Matic softwares were used in the development of the knee joint models. Meanwhile, the graft and fixators were designed by using SolidWorks software. Once the meshes of all models were finished in 3-Matic, simulation of the configurations was done using MSC Marc Mentat software. A 100-N anterior tibial load was applied onto the tibia to simulate the anterior drawer test. Based on the findings, cross-pin was found to have optimum stability in terms of stress and strain at the femoral fixation site for better treatment of ACL-R.
  11. Wibawa PJ, Nur M, Asy'ari M, Wijanarka W, Susanto H, Sutanto H, et al.
    Molecules, 2021 Jun 22;26(13).
    PMID: 34206375 DOI: 10.3390/molecules26133790
    This research aimed to enhance the antibacterial activity of silver nanoparticles (AgNPs) synthesized from silver nitrate (AgNO3) using aloe vera extract. It was performed by means of incorporating AgNPs on an activated carbon nanoparticle (ACNPs) under ultrasonic agitation (40 kHz, 2 × 50 watt) for 30 min in an aqueous colloidal medium. The successful AgNPs synthesis was clarified with both Ultraviolet-Visible (UV-Vis) and Fourier Transform Infrared (FTIR) spectrophotometers. The successful AgNPs-ACNPs incorporation and its particle size analysis was performed using Transmission Electron Microscope (TEM). The brown color suspension generation and UV-Vis's spectra maximum wavelength at around 480 nm confirmed the existence of AgNPs. The particle sizes of the produced AgNPs were about 5 to 10 nm in the majority number, which collectively surrounded the aloe vera extract secondary metabolites formed core-shell like nanostructure of 8.20 ± 2.05 nm in average size, while ACNPs themselves were about 20.10 ± 1.52 nm in average size formed particles cluster, and 48.00 ± 8.37 nm in average size as stacking of other particles. The antibacterial activity of the synthesized AgNPs and AgNPs-immobilized ACNPs was 57.58% and 63.64%, respectively (for E. coli); 61.25%, and 93.49%, respectively (for S. aureus). In addition, when the AgNPs-immobilized ACNPs material was coated on the cotton and polyester fabrics, the antibacterial activity of the materials changed, becoming 19.23% (cotton; E. coli), 31.73% (polyester; E. coli), 13.36% (cotton; S. aureus), 21.15% (polyester; S. aureus).
  12. Abdul Wahab AH, Mohamad Azmi NA, Abdul Kadir MR, Md Saad AP
    Int J Artif Organs, 2022 Feb;45(2):200-206.
    PMID: 33645338 DOI: 10.1177/0391398821999391
    Glenoid conformity is one of the important aspects that could contribute to implant stability. However, the optimal conformity is still being debated among the researchers. Therefore, this study aims to analyze the stress distribution of the implant and cement in three types of conformity (conform, non-conform, and hybrid) in three load conditions (central, anterior, and posterior). Glenoid implant and cement were reconstructed using Solidwork software and a 3D model of scapula bone was done using MIMICS software. Constant load, 750 N, was applied at the central, anterior, and posterior region of the glenoid implant which represents average load for daily living activities for elder people, including, walking with a stick and standing up from a chair. The results showed that, during center load, an implant with dual conformity (hybrid) showed the best (Max Stress-3.93 MPa) and well-distributed stress as compared to other conformity (Non-conform-7.21 MPa, Conform-9.38 MPa). While, during eccentric load (anterior and posterior), high stress was located at the anterior and posterior region with respect to the load applied. Cement stress for non-conform and hybrid implant recorded less than 5 MPa, which indicates it had a very low risk to have cement microcracks, whilst, conform implant was exposed to microcrack of the cement. In conclusion, hybrid conformity showed a promising result that could compromise between conform and non-conform implant. However, further enhancement is required for hybrid implants when dealing with eccentric load (anterior and posterior).
  13. Mizher H, Zin CS, Helal Uddin AB, Mohamed AH, Ling TH, Izzat M
    J Pharm Bioallied Sci, 2020 Nov;12(Suppl 2):S663-S666.
    PMID: 33828357 DOI: 10.4103/jpbs.JPBS_13_20
    Introduction: Little is known whether the duration of opioid use influences the concentrations of pro- and anti-inflammatory cytokines.

    Objectives: This study examined the plasma concentration of pro-inflammatory cytokine, interleukin 6 (IL-6), and anti-inflammatory cytokine, interleukin 10 (IL-10), in short-, and long-term opioid users with noncancer pain.

    Materials and Methods: Adult patients with opioid therapy for noncancer pain were recruited from pain clinics at two tertiary hospital settings in Malaysia between February 2016 and March 2017. They were stratified into short- or long-term users based on opioid prescriptions ≥ 90 days per year. A 10mL blood sample was taken for the analysis of plasma concentrations of IL-6 and IL-10 and were quantified using a highly sensitive multiplex assay.

    Results: Of 38 patients recruited, 24% (n = 9/38) and 76% (n = 29/38) were respectively short- and long-term opioid users. Short-term use of opioid was associated with higher levels of IL-6 (mean ± SD, 173.9 ± 13.7 pg/mL) and IL-10 (50 ± 5.8 pg/mL), whereas long-term use of opioids was associated with lower levels (no significant difference) of both cytokines IL6 (125 ± 16.1 pg/mL) and IL10 (41.3 ± 6.7 pg/mL). There was strong correlation between IL-6 and IL-10 within the same group (r² = 0.72, P < 0.05) and (r² = 0.76, P < 0.05) for short- and long-term users, respectively.

    Conclusion: The duration of opioid use may modulate the level of pro-inflammatory cytokines in which it was higher in short-term use and lower in long-term use, but the effect of pain relief was similar as both cytokines were well correlated.

  14. Abbas S, Al-Abrrow H, Abdullah HO, Alnoor A, Khattak ZZ, Khaw KW
    Curr Psychol, 2022;41(12):9109-9122.
    PMID: 33519147 DOI: 10.1007/s12144-021-01381-8
    Due to the outbreak of Covid-19 epidemic, work stress among health sector employees has risen too high. The study aims at determining the effect of the current coronavirus epidemic in the form of stress perceived among the medical workers in Pakistan and to discover the moderating role played by a healthy climate in offsetting it. The data was collected from 255 medical workers through a self-administered online questionnaire. Multiple Hierarchical Regression was used as a tool to test the hypotheses of the study. The results obtained indicate a correlation between the pandemic and the stress caused by it among the health workers, whereas, the role of a wholesome climate in the reduction of stress among them was found lacking. Sub-hypotheses indicate that the healthy environment provided by supervisors is effective in reducing the impact of workers' handling of the Covid-19 epidemic and perceived stress, while the healthy environment provided by hospitals in general or by workgroups fails to cause such positive change. This revelation necessitates the adoption of compulsory precautionary measures on the part of relevant authorities, because increase in stress caused by the pandemic can prove more lethal than the pandemic itself. The threat of the coronavirus pandemic has emerged as a massive socio-economic challenge for the global community, especially for the developing countries like Pakistan which faces serious socio-economic challenges in the current scenario. On account of the similarity of situations, the results obtained through this study can be safely generalized to other developing countries, particularly from the South Asian region.
  15. Abdollahpour Ranjbar H, Parhoon H, Mohammadkhani S, Munawar K, Moradi A, Jobson L
    Suicide Life Threat Behav, 2021 06;51(3):586-595.
    PMID: 33565166 DOI: 10.1111/sltb.12735
    OBJECTIVE: This study compared cognitive control (working memory, interference control, perseveration) and cognitive emotion regulation among Iranian women with depression who had attempted suicide, had only suicidal ideation, and healthy controls.

    METHOD: Participants (N = 75) completed a clinical interview, cognitive control tasks, and the Cognitive Emotion Regulation Questionnaire.

    RESULTS: Those with suicidal ideation or previous attempts had poorer cognitive control and cognitive emotion regulation than controls. Furthermore, those who had attempted suicide had poorer cognitive control and reported greater use of self-blame, rumination, and catastrophizing, and less use of acceptance, than those with suicidal ideation only. There was an indirect effect of cognitive control deficits on suicidality through cognitive emotion regulation (self-blame, acceptance, rumination, catastrophizing).

    CONCLUSIONS: Exploring these cognitive deficits and difficulties can assist in further understanding the risk factors for suicidality and improve targeted interventions. This is of particular relevance in Iran where the need for policies and interventions targeting the prevention of suicide has been identified.

  16. Mustafa N, Safii NS, Jaffar A, Sani NS, Mohamad MI, Abd Rahman AH, et al.
    JMIR Mhealth Uhealth, 2021 02 04;9(2):e24457.
    PMID: 33538704 DOI: 10.2196/24457
    BACKGROUND: Mobile health (mHealth) apps play an important role in delivering education, providing advice on treatment, and monitoring patients' health. Good usability of mHealth apps is essential to achieve the objectives of mHealth apps efficiently. To date, there are questionnaires available to assess the general system usability but not explicitly tailored to precisely assess the usability of mHealth apps. Hence, the mHealth App Usability Questionnaire (MAUQ) was developed with 4 versions according to the type of app (interactive or standalone) and according to the target user (patient or provider). Standalone MAUQ for patients comprises 3 subscales, which are ease of use, interface and satisfaction, and usefulness.

    OBJECTIVE: This study aimed to translate and validate the English version of MAUQ (standalone for patients) into a Malay version of MAUQ (M-MAUQ) for mHealth app research and usage in future in Malaysia.

    METHODS: Forward and backward translation and harmonization of M-MAUQ were conducted by Malay native speakers who also spoke English as their second language. The process began with a forward translation by 2 independent translators followed by harmonization to produce an initial translated version of M-MAUQ. Next, the forward translation was continued by another 2 translators who had never seen the original MAUQ. Lastly, harmonization was conducted among the committee members to resolve any ambiguity and inconsistency in the words and sentences of the items derived with the prefinal adapted questionnaire. Subsequently, content and face validations were performed with 10 experts and 10 target users, respectively. Modified kappa statistic was used to determine the interrater agreement among the raters. The reliability of the M-MAUQ was assessed by 51 healthy young adult mobile phone users. Participants needed to install the MyFitnessPal app and use it for 2 days for familiarization before completing the designated task and answer the M-MAUQ. The MyFitnessPal app was selected because it is one among the most popular installed mHealth apps globally available for iPhone and Android users and represents a standalone mHealth app.

    RESULTS: The content validity index for the relevancy and clarity of M-MAUQ were determined to be 0.983 and 0.944, respectively, which indicated good relevancy and clarity. The face validity index for understandability was 0.961, which indicated that users understood the M-MAUQ. The kappa statistic for every item in M-MAUQ indicated excellent agreement between the raters (κ ranging from 0.76 to 1.09). The Cronbach α for 18 items was .946, which also indicated good reliability in assessing the usability of the mHealth app.

    CONCLUSIONS: The M-MAUQ fulfilled the validation criteria as it revealed good reliability and validity similar to the original version. M-MAUQ can be used to assess the usability of mHealth apps in Malay in the future.

  17. Md Yusop AH, Ulum MF, Al Sakkaf A, Hartanto D, Nur H
    Biotechnol J, 2021 Dec;16(12):e2100255.
    PMID: 34520117 DOI: 10.1002/biot.202100255
    Iron (Fe) and Fe-based materials have been vigorously explored in orthopedic applications in the past decade mainly owing to their promising mechanical properties including high yield strength, elastic modulus and ductility. Nevertheless, their corrosion products and low corrosion kinetics are the major concerns that need to be improved further despite their appealing mechanical strengths. The current studies on porous Fe-based scaffolds show an improved corrosion rate but the in vitro biocompatibility is still problematic in general. Unlike the Mg implants, the biodegradation and bioabsorption of Fe-based implants are still not well described. This vague issue could implicate the development of Fe-based materials as potential medical implants as they have not reached the clinical trial stage yet. Thus, there is a need to understand in-depth the Fe corrosion behavior and its bioabsorption mechanism to facilitate the material design of Fe-based scaffolds and further improve its biocompatibility. This manuscript provides an important insight into the basic bioabsorption of the multi-ranged Fe-based corrosion products with a review of the latest progress on the corrosion & in vitro biocompatibility of porous Fe-based scaffolds together with the remaining challenges and the perspective on the future direction.
  18. Alsafrani AE, Adeosun WA, Marwani HM, Khan I, Jawaid M, Asiri AM, et al.
    Polymers (Basel), 2021 Sep 30;13(19).
    PMID: 34641198 DOI: 10.3390/polym13193383
    A new class of conductive metal-organic framework (MOF), polyaniline- aluminum succinate (PANI@Al-SA) nanocomposite was prepared by oxidative polymerization of aniline monomer using potassium persulfate as an oxidant. Several analytical techniques such as FTIR, FE-SEM, EDX, XRD, XPS and TGA-DTA were utilized to characterize the obtained MOFs nanocomposite. DC electrical conductivity of polymer-MOFs was determined by four probe method. A bare glassy carbon electrode (GCE) was modified by nafion/PANI@Al-SA, and examined for Zn (II) ion detection. Modified electrode showed improved efficiency by 91.9%. The modified electrode (PANI@Al-SA/nafion/GCE) exhibited good catalytic property and highly selectivity towards Zn(II) ion. A linear dynamic range of 2.8-228.6 µM was obtained with detection limit of LOD 0.59 µM and excellent sensitivity of 7.14 µA µM-1 cm-2. The designed procedure for Zn (II) ion detection in real sample exhibited good stability in terms of repeatability, reproducibility and not affected by likely interferents. Therefore, the developed procedure is promising for quantification of Zn(II) ion in real samples.
  19. Taufiq A, Yuliantika D, Sunaryono S, Saputro RE, Hidayat N, Mufti N, et al.
    An Acad Bras Cienc, 2021;93(4):e20200774.
    PMID: 34705939 DOI: 10.1590/0001-3765202120200774
    This study performs natural sand-based synthesis using the sonochemical route for preparing Zn-doped magnetite nanoparticles. The nanoparticles were dispersed in water as a carrier liquid to form Zn-doped magnetite aqueous ferrofluids. Structural data analysis indicated that the Zn-doped magnetite nanoparticles formed a nanosized spinel structure. With an increase in the Zn content, the lattice parameters of the Zn-doped magnetite nanoparticles tended to increase because Zn2+ has a larger ionic radius than those of Fe3+ and Fe2+. The existence of Zn-O and Fe-O functional groups in tetrahedral and octahedral sites were observed in the wavenumber range of 400-700 cm-1. The primary particles of the Zn-doped magnetite ferrofluids tended to construct chain-like structures with fractal dimensions of 1.2-1.9. The gas-like compression (GMC) plays as a better model than the Langevin theory to fit the saturation magnetization of the ferrofluids. The ferrofluids exhibited a superparamagnetic character, with their magnetization was contributed by aggregation. The Zn-doped magnetite ferrofluids exhibited excellent antibacterial activity against gram-positive and negative bacteria. It is suggested that the presence of the negatively charged surface and the nanoparticle size may contribute to the high antibacterial activity of Zn-doped magnetite ferrofluids and making them potentially suitable for advanced biomedical.
  20. Azlan AA, Hamzah MR, Tham JS, Ayub SH, Ahmad AL, Mohamad E
    PMID: 34063294 DOI: 10.3390/ijerph18094860
    Health literacy is progressively seen as an indicator to describe a nation's health status. To improve health literacy, countries need to address health inequalities by examining different social demographic factors across the population. This assessment is crucial to identify and evaluate the strengths and limitations of a country in addressing health issues. By addressing these health inequalities, a country would be better informed to take necessary steps to improve the nation's health literacy. This study examines health literacy levels in Malaysia and analyses socio-demographic factors that are associated with health literacy. A cross-sectional survey was carried out using the HLS-M-Q18 instrument, which was validated for the Malaysian population. Multi-stage random sampling strategy was used in this study, utilising several sampling techniques including quota sampling, cluster sampling, and simple random sampling to allow random data collection. A total of 855 respondents were sampled. Our results showed that there were significant associations between health literacy and age, health status, and health problems. Our findings also suggest that lower health literacy levels were associated with the younger generation. This study's findings have provided baseline data on Malaysians' health literacy and provide evidence showing potential areas of intervention.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links