Searches for the direct electroweak production of supersymmetric charginos, neutralinos, and sleptons in a variety of signatures with leptons and [Formula: see text], [Formula: see text], and Higgs bosons are presented. Results are based on a sample of proton-proton collision data collected at center-of-mass energy [Formula: see text] with the CMS detector in 2012, corresponding to an integrated luminosity of 19.5 [Formula: see text]. The observed event rates are in agreement with expectations from the standard model. These results probe charginos and neutralinos with masses up to 720 [Formula: see text], and sleptons up to 260 [Formula: see text], depending on the model details.
Measurements are reported of the WZ and ZZ production cross sections in proton-proton collisions at [Formula: see text][Formula: see text] in final states where one Z boson decays to b-tagged jets. The other gauge boson, either W or Z, is detected through its leptonic decay (either [Formula: see text], [Formula: see text] or [Formula: see text], [Formula: see text], or [Formula: see text]). The results are based on data corresponding to an integrated luminosity of 18.9 fb[Formula: see text] collected with the CMS detector at the Large Hadron Collider. The measured cross sections, [Formula: see text] and [Formula: see text], are consistent with next-to-leading order quantum chromodynamics calculations.
The normalised differential top quark-antiquark production cross section is measured as a function of the jet multiplicity in proton-proton collisions at a centre-of-mass energy of 7[Formula: see text] at the LHC with the CMS detector. The measurement is performed in both the dilepton and lepton+jets decay channels using data corresponding to an integrated luminosity of 5.0[Formula: see text]. Using a procedure to associate jets to decay products of the top quarks, the differential cross section of the [Formula: see text] production is determined as a function of the additional jet multiplicity in the lepton+jets channel. Furthermore, the fraction of events with no additional jets is measured in the dilepton channel, as a function of the threshold on the jet transverse momentum. The measurements are compared with predictions from perturbative quantum chromodynamics and no significant deviations are observed.
A search is presented for τ slepton pairs produced in proton-proton collisions at a center-of-mass energy of 13 TeV . The search is carried out in events containing two τ leptons in the final state, on the assumption that each τ slepton decays primarily to a τ lepton and a neutralino. Events are considered in which each τ lepton decays to one or more hadrons and a neutrino, or in which one of the τ leptons decays instead to an electron or a muon and two neutrinos. The data, collected with the CMS detector in 2016 and 2017, correspond to an integrated luminosity of 77.2 fb - 1 . The observed data are consistent with the standard model background expectation. The results are used to set 95% confidence level upper limits on the cross section for τ slepton pair production in various models for τ slepton masses between 90 and 200 GeV and neutralino masses of 1, 10, and 20 GeV . In the case of purely left-handed τ slepton production and decay to a τ lepton and a neutralino with a mass of 1 GeV , the strongest limit is obtained for a τ slepton mass of 125 GeV at a factor of 1.14 larger than the theoretical cross section.
A measurement of differential cross sections for the production of a pair of isolated photons in proton-proton collisions at [Formula: see text] is presented. The data sample corresponds to an integrated luminosity of 5.0[Formula: see text] collected with the CMS detector. A data-driven isolation template method is used to extract the prompt diphoton yield. The measured cross section for two isolated photons, with transverse energy above 40 and 25[Formula: see text] respectively, in the pseudorapidity range [Formula: see text], [Formula: see text] and with an angular separation [Formula: see text], is [Formula: see text][Formula: see text]. Differential cross sections are measured as a function of the diphoton invariant mass, the diphoton transverse momentum, the azimuthal angle difference between the two photons, and the cosine of the polar angle in the Collins-Soper reference frame of the diphoton system. The results are compared to theoretical predictions at leading, next-to-leading, and next-to-next-to-leading order in quantum chromodynamics.
A search for heavy, right-handed neutrinos, [Formula: see text] ([Formula: see text]), and right-handed [Formula: see text] bosons, which arise in the left-right symmetric extensions of the standard model, has been performed by the CMS experiment. The search was based on a sample of two lepton plus two jet events collected in proton-proton collisions at a center-of-mass energy of 8[Formula: see text] corresponding to an integrated luminosity of 19.7 [Formula: see text]. For models with strict left-right symmetry, and assuming only one [Formula: see text] flavor contributes significantly to the [Formula: see text] decay width, the region in the two-dimensional [Formula: see text] mass plane excluded at a 95 % confidence level extends to approximately [Formula: see text] and covers a large range of neutrino masses below the [Formula: see text] boson mass, depending on the value of [Formula: see text]. This search significantly extends the [Formula: see text] exclusion region beyond previous results.
The physical mechanisms of ultrasound, namely cavitation and acoustic streaming, generated by the Enac-Osada ultrasonic unit were investigated for effectiveness in disrupting Streptococcus mitis. In addition, the bactericidal effect of ultrasound in the presence of 2.5% sodium hypochlorite was examined. Bacterial suspensions were irradiated directly with ultrasound in simulated root canals, and the viability of bacteria was examined after growth on a blood agar medium under anaerobic conditions at 37 degrees C for 5 days. The results indicated that ultrasound per se failed to disrupt bacteria but resulted in increases in the viable counts; the former was considered to be because of the lack of cavitation and the latter because of the dispersal effects of acoustic streaming. The 2.5% sodium hypochlorite solution demonstrated powerful bactericidal activity.
Background: Congenital colour vision deficiency (CCVD) is an untreatable disorder which has lifelong consequences. Increasing use of colours in schools has raised concern for pupils with CCVD. This case-control study was conducted to compare behavioural and emotional issues among age, gender and class-matched pupils with CCVD and normal colour vision (NCV). Methods: A total of 1732 pupils from 10 primary schools in the Federal Territory of Kuala Lumpur were screened, of which 46 pupils (45 males and 1 female) had CCVD. Mothers of male pupils with CCVD (n=44) and NCV (n=44) who gave consent were recruited to complete a self-administered parent report form, Child Behaviour Checklist for Ages 4-18 (CBCL/ 4-18) used to access behavioural and emotional problems. The CBCL/ 4-18 has three broad groupings: Internalising, Externalising and Total Behaviour Problems. Internalising Problems combines the Withdrawn, Somatic Complaints and Anxiety/ Depression sub constructs, while Externalising Problems combines the Delinquent and Aggressive Behaviour sub constructs. Results: Results from CBCL/ 4-18 showed that all pupils from both groups had scores within the normal range for all constructs. However, results from the statistical analysis for comparison, Mann-Whitney U test, showed that pupils with CCVD scored significantly higher for Externalising Problems (U=697.50, p=0.02) and Total Behaviour Problems (U=647.00, p= 0.01). Significantly higher scores were observed in Withdrawn (U=714.00, p=0.02), Thought Problems (U=438.50, p<0.001) and Aggressive Behaviour (U=738.00, p=0.04). Odds ratios, 95% CI, showed significant relative risk for high Total Behaviour Problem (OR:2.39 ,CI:1.0-5.7), Externalising Problems (OR:2.32, CI:1.0-5.5), Withdrawn (OR:2.67, CI:1.1-6.5), Thought Problems (OR:9.64, CI:3.6-26.1) and Aggressive Behaviour (OR:10.26, CI:3.4-31.0) scores among pupils with CCVD. Conclusion: Higher scores among CCVD pupils indicates that they present more behavioural and emotional problems compared to NCV pupils. Therefore, school vision screenings in Malaysia should also include colour vision to assist in the early clinical management of CCVD children.
Fenton oxidation, an advanced oxidation process, is an efficient method for the treatment of recalcitrant wastewaters. Unfortunately, it utilizes H2O2 and iron-based homogeneous catalysts, which lead to the formation of high volumes of sludge and secondary pollutants. To overcome these problems, an alternate option is the usage of heterogeneous catalyst. In this study, a heterogeneous catalyst was developed to provide an alternative solution for homogeneous Fenton oxidation. Iron Zeolite Socony Mobile-5 (Fe-ZSM-5) was synthesized using a new two-step process. Next, the catalyst was characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, fourier transform infrared spectroscopy, and Brunauer-Emmett-Teller analysis and tested against a model wastewater containing the azo dye Acid Blue 113. Results showed that the loading of iron particles reduced the surface area of the catalyst from 293.59 to 243.93 m2/g; meanwhile, the average particle size of the loaded material was 12.29 nm. Furthermore, efficiency of the developed catalyst was evaluated by performing heterogeneous Fenton oxidation. Taguchi method was coupled with principal component analysis in order to assess and optimize mineralization efficiency. Experimental results showed that under optimized conditions, over 99.7% degradation and 77% mineralization was obtained, with a 90% reduction in the consumption of the developed catalyst. Furthermore, the developed catalyst was stable and reusable, with less than 2% leaching observed under optimized conditions. Thus, the present study proved that newly developed catalyst has enhanced the oxidation process and reduced the chemicals consumption.
Results of the Model Unspecific Search in CMS (MUSiC), using proton-proton collision data recorded at the LHC at a centre-of-mass energy of 13 TeV , corresponding to an integrated luminosity of 35.9 fb - 1 , are presented. The MUSiC analysis searches for anomalies that could be signatures of physics beyond the standard model. The analysis is based on the comparison of observed data with the standard model prediction, as determined from simulation, in several hundred final states and multiple kinematic distributions. Events containing at least one electron or muon are classified based on their final state topology, and an automated search algorithm surveys the observed data for deviations from the prediction. The sensitivity of the search is validated using multiple methods. No significant deviations from the predictions have been observed. For a wide range of final state topologies, agreement is found between the data and the standard model simulation. This analysis complements dedicated search analyses by significantly expanding the range of final states covered using a model independent approach with the largest data set to date to probe phase space regions beyond the reach of previous general searches.
A search for dark matter particles is performed using events with a Z boson candidate and large missing transverse momentum. The analysis is based on proton-proton collision data at a center-of-mass energy of 13 Te , collected by the CMS experiment at the LHC in 2016-2018, corresponding to an integrated luminosity of 137 fb - 1 . The search uses the decay channels Z → e e and Z → μ μ . No significant excess of events is observed over the background expected from the standard model. Limits are set on dark matter particle production in the context of simplified models with vector, axial-vector, scalar, and pseudoscalar mediators, as well as on a two-Higgs-doublet model with an additional pseudoscalar mediator. In addition, limits are provided for spin-dependent and spin-independent scattering cross sections and are compared to those from direct-detection experiments. The results are also interpreted in the context of models of invisible Higgs boson decays, unparticles, and large extra dimensions.
Production cross sections of the Higgs boson are measured in the H → Z Z → 4 ℓ ( ℓ = e , μ ) decay channel. A data sample of proton-proton collisions at a center-of-mass energy of 13 TeV , collected by the CMS detector at the LHC and corresponding to an integrated luminosity of 137 fb - 1 is used. The signal strength modifier μ , defined as the ratio of the Higgs boson production rate in the 4 ℓ channel to the standard model (SM) expectation, is measured to be μ = 0.94 ± 0.07 (stat) - 0.08 + 0.09 (syst) at a fixed value of m H = 125.38 GeV . The signal strength modifiers for the individual Higgs boson production modes are also reported. The inclusive fiducial cross section for the H → 4 ℓ process is measured to be 2 . 84 - 0.22 + 0.23 (stat) - 0.21 + 0.26 (syst) fb , which is compatible with the SM prediction of 2.84 ± 0.15 fb for the same fiducial region. Differential cross sections as a function of the transverse momentum and rapidity of the Higgs boson, the number of associated jets, and the transverse momentum of the leading associated jet are measured. A new set of cross section measurements in mutually exclusive categories targeted to identify production mechanisms and kinematical features of the events is presented. The results are in agreement with the SM predictions.
Pollen micro-morphological features have proven to be helpful for the plant taxonomists in the identification and classification of plants. The utilization of this plantmayhelpfulin the areas of lignocellulosic conversion to biofuels and diversify application toward biomass. The current study was planned with the aim to evaluate the pollen features of complex Ranunculaceous flora of District Chitral, Northern Pakistan using both scanning electron microscopy (SEM) and Light Microscope (LM) for their taxonomic importance. Pollens of 18 Ranunculaceous species belonging to 6 genera were collected from different localities of the research area. SEM and LM were used to examine both qualitative and quantitative micro-morphological features. Sculptring of the sexine include; Scabrate, psilate, echinate, verrucate, perforate gemmate, and reticulate and so forth. Shape of the pollens was sub-spheroidal, spheroidal, prolate, subprolate and oblate and so forth. Type of pollen was ranged from mono to tricolpate and tricolporate. Quantitative characters include length/width of the pollen, colpus, exine thickness, and P/E ratio. Based on these micro-morphological features a taxonomic key was prepared for the fast and correct identification. RESEARCH HIGHLIGHT: Study of the pollen micro-morphological features of Ranunculaceous species by SEM and LM. Analysing both qualitative and quantitative characters of the pollens. Preparation of taxonomic key based on micro-morphological features for the correct and fast identification.
The characteristics of a potentiometric biosensor for the determination of permethrin in treated wood based on immobilised cells of the fungus Lentinus sajor-caju on a potentiometric transducer are reported this paper. The potentiometric biosensor was prepared by immobilisation of the fungus in alginate gel deposited on a pH-sensitive transducer employing a photocurable acrylic matrix. The biosensor gave a good response in detecting permethrin over the range of 1.0-100.0 µM. The slope of the calibration curve was 56.10 mV/decade with detection limit of 1.00 µM. The relative standard deviation for the sensor reproducibility was 4.86%. The response time of the sensor was 5 min at optimum pH 8.0 with 1.00 mg/electrode of fungus L. sajor-caju. The permethrin biosensor performance was compared with the conventional method for permethrin analysis using high performance liquid chromatography (HPLC), and the analytical results agreed well with the HPLC method (at 95% confidence limit). There was no interference from commonly used organophosphorus pesticides such as diazinon, parathion, paraoxon, and methyl parathion.
Polyhydroxybutyrate (PHB)/polycaprolactone (PCL)/stearate Mg-Al layered double hydroxide (LDH) nanocomposites were prepared via solution casting intercalation method. Coprecipitation method was used to prepare the anionic clay Mg-Al LDH from nitrate salt solution. Modification of nitrate anions by stearate anions between the LDH layers via ion exchange reaction. FTIR spectra showed the presence of carboxylic acid (COOH) group which indicates that stearate anions were successfully intercalated into the Mg-Al LDH. The formation of nanocomposites only involves physical interaction as there are no new functional groups or new bonding formed. X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicated that the mixtures of nanocomposites are intercalated and exfoliated types. XRD results showed increasing of basal spacing from 8.66 to 32.97 Å in modified stearate Mg-Al LDH, and TEM results revealed that the stearate Mg-Al LDH layers are homogeneously distributed in the PHB/PCL polymer blends matrix. Enhancement in 300% elongation at break and 66% tensile strength in the presence of 1.0 wt % of the stearate Mg-Al LDH as compare with PHB/PCL blends. Scanning electron microscopy (SEM) proved that clay improves compatibility between polymer matrix and the best ratio 80PHB/20PCL/1stearate Mg-Al LDH surface is well dispersed and stretched before it breaks.
In this research, silver nanoparticles (AgNPs) were synthesized in chitosan (Cts), Cts/gelatin and gelatin suspensions using a chemical reducing agent. Cts and gelatin were used as natural stabilizers and solid support, whereas AgNO(3) was used as the silver precursor. Sodium borohydride (NaBH(4)) was used as the reducing agent. The properties of AgNPs in Cts, Cts/gelatin and gelatin bionanocomposites (BNCs) were studied in terms of their surface plasmon resonance, crystalline structure, average diameter size, particle distributions, surface topography and functional groups. All the samples were characterized by UV-visible spectroscopy, powder X-ray diffraction, transmission electron microscopy, atomic force microscopy and Fourier transform infrared spectroscopy.
Optical biosensor for the detection of formaldehyde has been developed based on the transparent enzymatic stacked membranes system on the glass substrate, and employing optical absorption transducer with H+ ion-selective Nile Blue chromoionophore (NBCM) dye-doped methacrylic acrylic (MB28) copolymer membrane as the optode membrane. Alcohol oxidase (AOx) enzymes were entrapped within the biocompatible sol-gel matrix and deposited on top of the pH optode membrane. As the uppermost catalytic membrane catalyzes the oxidative conversion of formaldehyde to formic acid and hydrogen peroxide, the immobilized NBCM undergoes protonation reaction and forms HNBCM+, the dark blue ion-chromoionophore complex via H+ ion transfer reaction within the soft and flexible MB28 polymeric membrane. This rendered the enzymatic optode membrane absorbed a high yellow light intensity from the light source and exhibited maximum absorption peaks at 610 and 660 nm. Optical evaluation of formaldehyde by means on UV-vis absorption transduction of the enzymatic stacked membranes demonstrated rapid response time of 10 min with high sensitivity, good linearity and high reproducibility across a wide formaldehyde concentration range of 1 × 10-3-1 × 103 mM (R2 = 0.9913), and limit of detection (LOD) at 1 × 10-3 mM, which could be useful for formaldehyde assay in industrial, agricultural, environmental, food and beverages as well as medical samples. The formaldehyde concentration in snapper fish, pomfret fish and threadfin fish samples determined by the proposed optical enzymatic biosensor were very much close to the formaldehyde concentration values determined by the UV-vis spectrophotometric NASH standard method based on the statistical t-test. This suggests that the optical biosensor can be used as a reliable method for quantitative determination of formaldehyde levels in food samples.
Pyrazoline and benzimidazoles derivatives have been widely studied due to their potential applications in the medicinal field. In this research project, we have hybridized these two heterocyclic systems in the same molecule. A new series of compounds, 2-((3,5-diaryl-4,5-dihydro-1H-pyrazol-1-yl)methyl)-1H-benzo[d]imidazole (5a-i) were synthesized through a multistep reaction. In the first step, chalcones 3a-i were prepared by coupling of various acetophenones and benzaldehydes under alkaline conditions. These chalcones were cyclized with hydrazine hydrate to form a series of pyrazolines which were finally coupled with 2-chloromethyl-1H-benzimidazole to get a new series of titled hybrid molecules. The structures of these compounds were elucidated by spectral (1H NMR and 13C NMR) analysis. The anti-diabetic potential of these compounds was studied by screening them for their α-glucosidase inhibition activity. The SAR was established through molecular docking analysis. Compound 5d appeared as effective inhibitor with IC50 = 50.06μM as compared to reference drug (acarbose) having IC50 = 58.8μM.
α-Glucosidase inhibitors occupy a prominent position among the various treatments of type-2 diabetes mellitus (DM2). In this study, a series of new norfloxacin-acetanilide hybrid molecules were synthesized and screened for α-glucosidase inhibition activity. The synthetic methodology involves the synthesis of a series of α-bromoacetanilides by condensing bromoacetyl bromide with various substituted anilines. These α-bromoacetanilides were coupled with norfloxacin in DMF to get the titled hybrids. The structure elucidation of synthesized compounds were characterized by 1H NMR, 13C NMR and LC-MS. Finally, the compounds were screened for their α-glucosidase inhibition activity using acarbose as a reference drug (IC50 =58 μM). Among the tested compounds, 3i and 3j displayed potent α-glucosidase inhibition activity with IC50 values of 7.81±0.038 and 5.55±0.012 μM respectively. In-addition, 3m, 3f and 3k were demonstrated moderate alpha-glucosidase inhibition activities with IC50 values of 52.905±0.041, 23.79± 0.087 and 23.06±0.026 μM respectively. The structure-activity relationship was established with the help of molecular docking by using Molecular Operating Environment software (MOE 2014).
Heterocyclic compounds are attractive candidates because of their vast applications in natural and physical sciences. Thienothiophene (TT) is an annulated ring of two thiophene rings with a stable and electron-rich structure. Thienothiophenes (TTs) fully represent the planar system, which can drastically alter or improve the fundamental properties of organic, π-conjugated materials when included into a molecular architecture. These molecules possessed many applications including, pharmaceutical as well as optoelectronic properties. Different isomeric forms of thienothiophene showed various applications such as antiviral, antitumor, antiglaucoma, antimicrobial, and as semiconductors, solar cells, organic field effect transistors, electroluminiscents etc. A number of methodologies were adopted to synthesize thienothiophene derivatives. In this review, we have addressed different synthetic strategies of various isomeric forms of thienothiophene that have been reported during last seven years, i.e., 2016-2022.