Tongkat Ali (Eurycoma longifolia) is one of the most popular tropical herbal plants as it is believed to enhance virility and sexual prowess. This study looked examined chromatographic fingerprint of Tongkat Ali roots and its products generated using online solid phase-extraction liquid chromatography (SPE-LC) combined with chemometric approaches. The aim was to determine its quality. Pressurised liquid extraction (PLE) technique was used prior to online SPE-LC using polystyrene divinyl benzene (PSDVB) and C18 columns. Seventeen Tongkat Ali roots and 10 products (capsules) were analysed. Chromatographic dataset was subjected to chemometric techniques, namely cluster analysis (CA), discriminant analysis (DA) and principal component analysis (PCA) using 37 selected peaks. The samples were grouped into three clusters based on their quality. The PCA resulted in 11 latent factors describing 90.8% of the whole variance. Pattern matching analysis showed no significant difference (p>0.05) between the roots and products within the same CA grouping. The findings showed the combination of chromatographic fingerprint and chemometric techniques provided comprehensive evaluation for efficient quality control of Tongkat Ali formulation.
Cable joint insulation breakdown may cause a huge loss to power companies. Therefore, it is vital to diagnose the insulation quality to detect early signs of insulation failure. It is well known that there is a correlation between Partial discharge (PD) and the insulation quality. Although many works have been done on PD pattern recognition, it is usually performed in a noise free environment. Also, works on PD pattern recognition in actual cable joint are less likely to be found in literature. Therefore, in this work, classifications of actual cable joint defect types from partial discharge data contaminated by noise were performed. Five cross-linked polyethylene (XLPE) cable joints with artificially created defects were prepared based on the defects commonly encountered on site. Three different types of input feature were extracted from the PD pattern under artificially created noisy environment. These include statistical features, fractal features and principal component analysis (PCA) features. These input features were used to train the classifiers to classify each PD defect types. Classifications were performed using three different artificial intelligence classifiers, which include Artificial Neural Networks (ANN), Adaptive Neuro-Fuzzy Inference System (ANFIS) and Support Vector Machine (SVM). It was found that the classification accuracy decreases with higher noise level but PCA features used in SVM and ANN showed the strongest tolerance against noise contamination.
The individual compounds and sources of polycyclic aromatic hydrocarbon (PAHs) were studied in the surface sediments
at 32 locations in the tourism area of Langkawi Island. A total of 15 PAHs were determined and quantified by gas
chromatography coupled with mass spectrometry (GC-MS). The total PAH concentrations of surface sediments from
Langkawi Island ranged from 228.13 to 990.25 ng/g and they were classified as being in the low to moderate pollution
range. All sampling stations were dominated by high molecular weight PAHs with 4 rings (31.59%) and 5-6 rings (42.73%).
The diagnostic ratio results showed that in most cases, the sampling stations have pyrogenic input. Further analysis
using principal component analysis (PCA) combined with absolute principal component score (APCS) and multiple linear
regression (MLR) showed that the natural gas emissions contributed to 57% of the total PAH concentration, 22% from the
incomplete combustion and pyrolysis of fuel, 15% from pyrogenic and petrogenic sources and 6% from an undefined source.
Drugs-facilitated crimes (DFCs) involve the incapacitation of victims under the influence of drugs. Conventionally, a drug administration act is often determined through the examination of biological samples; however, dry residues from any surface, such as drinking glass if related to a DFC could be a potential source of evidence. This study was aimed to establish an attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy coupled with chemometrics for the determination of spiked sedative-hypnotics from dry residues of a drug-spiked beverage. In this study, four sedative-hypnotics, namely diazepam, ketamine, nimetazepam, and xylazine were examined using ATR-FTIR spectroscopy. Subsequently, the ATR-FTIR profiles were compared and decomposed by principal component analysis (PCA) followed by linear discriminant analysis (LDA) for their detection and discrimination. Visual comparison of ATR-FTIR profiles revealed distinct spectra among the tested drugs. An initial unsupervised exploratory PCA model indicated the separation of four main sedative-hypnotics clusters, and the proposed PCA score-LDA model had allowed for a 100% accurate classification. Discrimination of sedative-hypnotics from a dry beverage previously spiked with these drugs was also possible upon an additional extraction procedure. In conclusion, ATR-FTIR coupled with PCA score-LDA model was useful in detecting and discriminating sedative-hypnotics, including those that had been previously spiked into a beverage.
Falls are common and often lead to serious physical and psychological consequences for older persons. The occurrence of falls are usually attributed to the interaction between multiple risk factors. The clinical evaluation of falls risks is time-consuming as a result, hence limiting its availability. The purpose of this study was, therefore, to develop a clustering-based algorithm to determine falls risk. Data from the Malaysian Elders Longitudinal Research (MELoR), comprising 1411 subjects aged ≥55 years, were utilized. The proposed algorithm was developed through the stages of: data pre-processing, feature identification and extraction with either t-Distributed Stochastic Neighbour Embedding (t-SNE) or principal component analysis (PCA)), clustering (K-means clustering, Hierarchical clustering, and Fuzzy C-means clustering) and characteristics interpretation with statistical analysis. A total of 1279 subjects and 9 variables were selected for clustering after the data pre-possessing stage. Using feature extraction with the t-SNE and the K-means clustering algorithm, subjects were clustered into low, intermediate A, intermediate B and high fall risk groups which corresponded with fall occurrence of 13%, 19%, 21% and 31% respectively. Slower gait, poorer balance, weaker muscle strength, presence of cardiovascular disorder, poorer cognitive performance, and advancing age were the key variables identified. The proposed fall risk clustering algorithm grouped the subjects according to features. Such a tool could serve as a case identification or clinical decision support tool for clinical practice to enhance access to falls prevention efforts.
The presence of harmful substances in the atmosphere poses significant risks to the environment and public health. These pollutants can come from natural sources like dust and wildfires, or from human activities such as industrial, transportation, and agricultural practices. The objective of this study was to assess air quality on the East Coast of Peninsular Malaysia by analyzing historical data from the Department of Environment, Malaysia. Daily measurements of PM10, O3, SO2, NO2, and CO were collected from eight monitoring stations over 11 years (2011-2021) and analyzed using environmetric techniques. Hierarchical agglomerative cluster analysis (HACA) classified two stations as belonging to the high pollution cluster (HPC), three stations as part of the moderate pollution cluster (MPC), and three stations as the low pollution cluster (LPC). Discriminant analysis revealed a correct assignment rate of 90.50%, indicating that all five parameters were able to differentiate pollution levels with high significance (p
In the Johor River Basin, a comprehensive analysis was conducted on 24 water environmental parameters across 33 sampling sites over 3 years, encompassing both dry and wet seasons. A total of 396 water samples were collected and analyzed to calculate the Water Quality Index (WQI). To further assess water quality and pinpoint potential pollution sources, multivariate techniques such as principal component analysis (PCA) and cluster analysis (CA), alongside spatial analysis using inverse distance weighted (IDW) interpolation, were employed. According to the National Water Quality Standard, most of the analyzed physicochemical components fall within Classes II and III, albeit with varying concentrations. However, certain sites exhibited levels of BOD5, TSS, and nutrients such as total nitrogen (TN) and total phosphorus (TP) that exceeded the threshold level of water quality standards, signaling pollution from diverse sources. Notably, all trace elements, with the exception of copper (Cu) and nickel (Ni), remained within the acceptable limits set by WHO guidelines and the National Water Quality Standard. PCA revealed parameter groupings linked to factors such as soil erosion, salinity, wastewater discharge, and fecal contamination, which are key determinants of water quality. The cluster analysis categorized the 33 sampling sites into three distinct clusters, each reflecting the geological setting and varying levels of pollution. The IDW-based spatial distribution indicated significant water quality degradation as the river flows downstream, particularly in regions experiencing rapid agricultural, industrial, and residential development. These activities contribute to the breakdown of organic matter and the release or overflow of wastewater into nearby river systems. This study highlights the effectiveness of integrating data-driven methodologies for surface water quality assessment, offering valuable insights for sustainable watershed management.
Digital image forgery is becoming easier to perform because of the rapid development of various manipulation tools. Image splicing is one of the most prevalent techniques. Digital images had lost their trustability, and researches have exerted considerable effort to regain such trustability by focusing mostly on algorithms. However, most of the proposed algorithms are incapable of handling high dimensionality and redundancy in the extracted features. Moreover, existing algorithms are limited by high computational time. This study focuses on improving one of the image splicing detection algorithms, that is, the run length run number algorithm (RLRN), by applying two dimension reduction methods, namely, principal component analysis (PCA) and kernel PCA. Support vector machine is used to distinguish between authentic and spliced images. Results show that kernel PCA is a nonlinear dimension reduction method that has the best effect on R, G, B, and Y channels and gray-scale images.
Matched MeSH terms: Principal Component Analysis/methods*
This paper describes an image analysis technique that objectively measures skin repigmentation for the assessment of therapeutic response in vitiligo treatments. Skin pigment disorders due to the abnormality of melanin production, such as vitiligo, cause irregular pale patches of skin. The therapeutic response to treatment is repigmentation of the skin. However the repigmentation process is very slow and is only observable after a few months of treatment. Currently, there is no objective method to assess the therapeutic response of skin pigment disorder treatment, particularly for vitiligo treatment. In this work, we apply principal component analysis followed by independent component analysis to represent digital skin images in terms of melanin and haemoglobin composition respectively. Vitiligo skin areas are identified as skin areas that lack melanin (non-melanin areas). Results obtained using the technique have been verified by dermatologists. Based on 20 patients, the proposed technique effectively monitored the progression of repigmentation over a shorter time period of six weeks and can thus be used to evaluate treatment efficacy objectively and more effectively.
Matched MeSH terms: Principal Component Analysis/methods*
Boosting accuracy in automatically discriminating patients with Alzheimer's disease (AD) and normal controls (NC), based on multidimensional classification of longitudinal whole brain atrophy rates and their intermediate counterparts in analyzing magnetic resonance images (MRI).
Matched MeSH terms: Principal Component Analysis/methods*
Food intake biomarkers (FIBs) can reflect the intake of specific foods or dietary patterns (DP). DP for successful aging (SA) has been widely studied. However, the relationship between SA and DP characterized by FIBs still needs further exploration as the candidate markers are scarce. Thus, 1H-nuclear magnetic resonance (1H-NMR)-based urine metabolomics profiling was conducted to identify potential metabolites which can act as specific markers representing DP for SA. Urine sample of nine subjects from each three aging groups, SA, usual aging (UA), and mild cognitive impairment (MCI), were analyzed using the 1H-NMR metabolomic approach. Principal components analysis (PCA) and partial least-squares discriminant analysis (PLS-DA) were applied. The association between SA urinary metabolites and its DP was assessed using the Pearson's correlation analysis. The urine of SA subjects was characterized by the greater excretion of citrate, taurine, hypotaurine, serotonin, and melatonin as compared to UA and MCI. These urinary metabolites were associated with alteration in "taurine and hypotaurine metabolism" and "tryptophan metabolism" in SA elderly. Urinary serotonin (r = 0.48, p < 0.05) and melatonin (r = 0.47, p < 0.05) were associated with oat intake. These findings demonstrate that a metabolomic approach may be useful for correlating DP with SA urinary metabolites and for further understanding of SA development.
Matched MeSH terms: Principal Component Analysis/methods
The stability and high yielding of Vigna subterranea L. Verdc. genotype is an important factor for long-term development and food security. The effects of G × E interaction on yield stability in 30 Bambara groundnut genotypes in four different Malaysian environments were investigated in this research. The experiment used a randomized complete block design with three replications in each environment. Over multiple harvests, yield component traits such as the total number of pods per plant, fresh pods weight (g), hundred seeds weight (g), and yield per hectare were evaluated in the main and off-season in 2020 and 2021. Stability tests for multivariate stability parameters were performed based on analyses of variance. For all the traits, the pooled analysis of variance revealed highly significant (p
Matched MeSH terms: Principal Component Analysis/methods*
Rising global temperatures can lead to heat waves, which in turn can pose health risks to the community. However, a notable gap remains in highlighting the primary contributing factors that amplify heat-health risk among vulnerable populations. This study aims to evaluate the precedence of heat stress contributing factors in urban and rural vulnerable populations living in hot and humid tropical regions. A comparative cross-sectional study was conducted, involving 108 respondents from urban and rural areas in Klang Valley, Malaysia, using a face-to-face interview and a validated questionnaire. Data was analyzed using the principal component analysis, categorizing factors into exposure, sensitivity, and adaptive capacity indicators. In urban areas, five principal components (PCs) explained 64.3% of variability, with primary factors being sensitivity (health morbidity, medicine intake, increased age), adaptive capacity (outdoor occupation type, lack of ceiling, longer residency duration), and exposure (lower ceiling height, increased building age). In rural, five PCs explained 71.5% of variability, with primary factors being exposure (lack of ceiling, high thermal conductivity roof material, increased building age, shorter residency duration), sensitivity (health morbidity, medicine intake, increased age), and adaptive capacity (female, non-smoking, higher BMI). The order of heat-health vulnerability indicators was sensitivity > adaptive capacity > exposure for urban areas, and exposure > sensitivity > adaptive capacity for rural areas. This study demonstrated a different pattern of leading contributors to heat stress between urban and rural vulnerable populations.
The present study was undertaken to determine the content of six minerals, five trace elements, and ten pesticide residues in honeys originating from different regions of Malaysia. Calcium (Ca), magnesium (Mg), iron (Fe), and zinc (Zn) were analyzed by flame atomic absorption spectrometry (FAAS), while sodium (Na) and potassium (K) were analyzed by flame emission spectrometry (FAES). Trace elements such as arsenic (As), lead (Pb), cadmium (Cd), copper (Cu), and cobalt (Co) were analyzed by graphite furnace atomic absorption spectrometry (GFAAS) following the microwave digestion of honey. High mineral contents were observed in the investigated honeys with K, Na, Ca, and Fe being the most abundant elements (mean concentrations of 1349.34, 236.80, 183.67, and 162.31 mg/kg, resp.). The concentrations of the trace elements were within the recommended limits, indicating that the honeys were of good quality. Principal component analysis reveals good discrimination between the different honey samples. The pesticide analysis for the presence of organophosphorus and carbamates was performed by high performance liquid chromatography (HPLC). No pesticide residues were detected in any of the investigated honey samples, indicating that the honeys were pure. Our study reveals that Malaysian honeys are rich sources of minerals with trace elements present within permissible limits and that they are free from pesticide contamination.
In recent years, groundwater quality has become a global concern due to its effect on human life and natural ecosystems. To assess the groundwater quality in the Amol-Babol Plain, a total of 308 water samples were collected during wet and dry seasons in 2009. The samples were analysed for their physico-chemical and biological constituents. Multivariate statistical analysis and geostatistical techniques were applied to assess the spatial and temporal variabilities of groundwater quality and to identify the main factors and sources of contamination. Principal component analysis (PCA) revealed that seven factors explained around 75% of the total variance, which highlighted salinity, hardness and biological pollution as the dominant factors affecting the groundwater quality in the Plain. Two-way analysis of variance (ANOVA) was conducted on the dataset to evaluate the spatio-temporal variation. The results showed that there were no significant temporal variations between the two seasons, which explained the similarity between six component factors in dry and wet seasons based on the PCA results. There are also significant spatial differences (p > 0.05) of the parameters under study, including salinity, potassium, sulphate and dissolved oxygen in the plain. The least significant difference (LSD) test revealed that groundwater salinity in the eastern region is significantly different to the central and western side of the study area. Finally, multivariate analysis and geostatistical techniques were combined as an effective method for demonstrating the spatial structure of multivariate spatial data. It was concluded that multiple natural processes and anthropogenic activities were the main sources of groundwater salinization, hardness and microbiological contamination of the study area.
The characteristics of urban stormwater pollution in the tropics are still poorly understood. This issue is crucial to the tropical environment because its rainfall and runoff generation processes are so different from temperate regions. In this regard, a stormwater monitoring program was carried out at three urban catchments (e.g. residential, commercial and industrial) in the southern part of Peninsular Malaysia. A total of 51 storm events were collected at these three catchments. Samples were analyzed for total suspended solids, 5-day biochemical oxygen demand, chemical oxygen demand (COD), oil and grease, nitrate nitrogen, nitrite nitrogen, ammonia nitrogen (NH3-N), soluble reactive phosphorus and total phosphorus. Principal component analysis (PCA) and hierarchical cluster analysis were used to interpret the stormwater quality data for pattern recognition and identification of possible sources. The most likely sources of stormwater pollutants at the residential catchment were from surface soil and leachate of fertilizer from domestic lawns and gardens, whereas the most likely sources for the commercial catchment were from discharges of food waste and washing detergent. In the industrial catchment, the major sources of pollutants were discharges from workshops and factories. The PCA factors further revealed that COD and NH3-N were the major pollutants influencing the runoff quality in all three catchments.
The study was aimed to differentiate between porcine and bovine gelatines in adulterated samples by utilising sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) combined with principal component analysis (PCA). The distinct polypeptide patterns of 6 porcine type A and 6 bovine type B gelatines at molecular weight ranged from 50 to 220 kDa were studied. Experimental samples of raw gelatine were prepared by adding porcine gelatine in a proportion ranging from 5% to 50% (v/v) to bovine gelatine and vice versa. The method used was able to detect 5% porcine gelatine added to the bovine gelatine. There were no differences in the electrophoretic profiles of the jelly samples when the proteins were extracted with an acetone precipitation method. The simple approach employing SDS-PAGE and PCA reported in this paper may provide a useful tool for food authenticity issues concerning gelatine.
A sum of 48 accessions of physic nut, Jatropha curcas L. were analyzed to determine the genetic diversity and association between geographical origin using RAPD-PCR markers. Eight primers generated a total of 92 fragments with an average of 11.5 amplicons per primer. Polymorphism percentages of J. curcas accessions for Selangor, Kelantan, and Terengganu states were 80.4, 50.0, and 58.7%, respectively, with an average of 63.04%. Jaccard's genetic similarity co-efficient indicated the high level of genetic variation among the accessions which ranged between 0.06 and 0.81. According to UPGMA dendrogram, 48 J. curcas accessions were grouped into four major clusters at coefficient level 0.3 and accessions from same and near states or regions were found to be grouped together according to their geographical origin. Coefficient of genetic differentiation (G(st)) value of J. curcas revealed that it is an outcrossing species.
The genus Curcuma is a member of the ginger family (Zingiberaceae) that has recently become popular for use as flowering pot plants, both indoors and as patio and landscape plants. We used PCR-based molecular markers (ISSRs) to assess genetic variation and relationships between five varieties of curcuma (Curcuma alismatifolia) cultivated in Malaysia. Sixteen ISSR primers generated 139 amplified fragments, of which 77% had high polymorphism among these varieties. These markers were used to estimate genetic similarity among the varieties using Jaccard's similarity coefficient. The similarity matrix was used to construct a dendrogram, and a principal component plot was developed to examine genetic relationships among varieties. Similarity coefficient values ranged from 0.40 to 0.58 (with a mean of 0.5) among the five varieties. The mean value of number of observed alleles, number of effective alleles, mean Nei's gene diversity, and Shannon's information index were 8.69, 1.48, 0.29, and 0.43, respectively.
The pollution status of the downstream section of the Jakara River was investigated. Dissolved oxygen (DO), 5-day biochemical oxygen demand (BOD(5)), chemical oxygen demand (COD), suspended solids (SS), pH, conductivity, salinity, temperature, nitrogen in the form of ammonia (NH(3)), turbidity, dissolved solids (DS), total solids (TS), nitrates (NO(3)), chloride (Cl) and phosphates (PO(3-)(4)) were evaluated, using both dry and wet season samples, as a measure of variation in surface water quality in the area. The results obtained from the analyses were correlated using Pearson's correlation matrix, principal component analysis (PCA) and paired sample t-tests. Positive correlations were observed for BOD(5), NH(3), COD, and SS, turbidity, conductivity, salinity, DS, TS for dry and wet seasons, respectively. PCA was used to investigate the origin of each water quality parameter, and yielded 5 varimax factors for each of dry and wet seasons, with 70.7 % and 83.1 % total variance, respectively. A paired sample t-test confirmed that the surface water quality varies significantly between dry and wet season samples (P < 0.01). The source of pollution in the area was concluded to be of anthropogenic origin in the dry season and natural origins in the wet season.