Displaying publications 41 - 60 of 88 in total

Abstract:
Sort:
  1. Lasekan O, Teoh LS
    BMC Chem, 2019 Dec;13(1):133.
    PMID: 31891159 DOI: 10.1186/s13065-019-0650-3
    Background: The aroma chemistry and the contribution of the aroma compounds to the anti-oxidative properties of roasted yam have yet to be characterized. The growing popularity of roasted yam in regions where they are being consumed calls for a concerted effort to elucidate their aroma chemistry as well as their anti-oxidative properties.

    Results: The aroma compounds in roasted white yam (Dioscorea rotundata) were isolated and identified using static headspace-gas chromatography-mass spectrometry (SH-GC-MS) and gas chromatography-olfactometry (GC-O). In addition, the anti-oxidative activities of the most abundant volatile heterocyclic compounds (2 pyrroles, 4 furans and 3 pyrazines) were evaluated on their inhibitory effect towards the oxidation of hexanal for a period of 30 days. Twenty-nine aroma-active compounds with a flavour dilution (FD) factor range of 2-256 and an array of odour notes were obtained. Among them, the highest odour activities (FD ≥ 128) factors were determined for 2-acetyl furan and 2-acetylpyrrole. Other compounds with significant FD factors ≥ 32 were; 2-methylpyrazine, ethyl furfural, and 5-hydroxy methyl furfural.

    Conclusion: Results of the anti-oxidative activity showed that the pyrroles exhibited the greatest antioxidant activity among all the tested heterocyclic compounds. This was followed by the furans and the pyrazines which had the least antioxidant activity.

    Matched MeSH terms: Flavoring Agents
  2. Haslaniza, H., Maskat, M. Y, Wan Aida, W. M., Mamot, S., Saadiah, I.
    MyJurnal
    Cockle (Anadara granosa) meat wash water precipitate was hydrolyzed using bromelain. Experiments were carried out to determine optimum conditions for temperature, enzyme concentration and hydrolysis time using response surface methodology (RSM) based on a central composite rotatable design (CCRD) to obtain the highest value of nitrogen content (NC) and degree of hydrolysis (DH). Results revealed that the optimum conditions for temperature, enzyme concentration and hydrolysis time were 33.7°C, 1.45% (E/S) and 28.42 hrs, respectively. At the optimum condition, hydrolysis of cockle meat wash water precipitate using bromelain resulted in a NC of 0.6% and DH of 48%. The NC and DH were significantly influenced by temperature, enzyme concentration and hydrolysis time. When the bromelain concentration, hydrolysis time and temperature were increased, the values of NC and DH also increased. The hydrolysate produced contained flavor compounds found in clam and oyster which were 3-methylbutanol and 1-pentanol. The compound 3-MCPD was not found in the hydrolysate.
    Matched MeSH terms: Flavoring Agents
  3. Gumel AM, Annuar MSM
    3 Biotech, 2016 Jun;6(1):24.
    PMID: 28330099 DOI: 10.1007/s13205-015-0355-9
    Enzymatic catalysis is considered to be among the most environmental friendly processes for the synthesis of fine chemicals. In this study, lipase from Thermomyces lanuginosus (Lecitase Ultra™) was used to catalyze the synthesis of flavor esters, i.e., methyl butanoate and methyl benzoate by esterification of the acids with methanol in a microfluidic system. Maximum reaction rates of 195 and 115 mM min(-1) corresponding to catalytic efficiencies (k cat/K M) of 0.30 and 0.24 min(-1) mM(-1) as well as yield conversion of 54 and 41 % were observed in methyl butanoate and methyl benzoate synthesis, respectively. Catalytic turnover (k cat) was higher for methyl butanoate synthesis. Rate of synthesis and yield decreased with increasing flow rates. For both esters, increase in microfluidic flow rate resulted in increased advective transport over molecular diffusion and reaction rate, thus lower conversion. In microfluidic synthesis using T. lanuginosus lipase, the following reaction conditions were 40 °C, flow rate 0.1 mL min(-1), and 123 U g(-1) enzyme loading found to be the optimum operating limits. The work demonstrated the application of enzyme(s) in a microreactor system for the synthesis of industrially important esters.
    Matched MeSH terms: Flavoring Agents
  4. Aishah, M.S., Wan Rosli, W.I.
    MyJurnal
    Mushroom cultivation has been more popular recently in Malaysia. They are favoured due to their delicious flavour and low calorific value. Apart from that, they also contain high amount of protein and other essential nutrients. As recommended by food pyramid, people should take in more of their calories from whole grains-based foods than any other sources. Three selected carbohydrate based products namely rice-porridge (RP), paratha flat bread (PB) and conventional cake (CC) were formulated with dried Pleurotus sajor-caju (PSC) powder. All three products were analyzed for proximate analysis and sensory evaluation. Result shows the percentage of moisture, ash, fat and protein of RP increased in line with the levels of PSC powder used except for carbohydrate. Whereas for PB and CCs added with 2%, 4% and 6% PSC, the percentage of all nutrients were higher than control (0%) except for fat. Mushroombased RP had significantly higher value of odour attribute as compared to control, with RP added with 6% PSC powder received the highest score. Meanwhile, mushroom-based PB received better score on textural attribute compared the control. In CC, panels prefer the cake added with 4% PSC powder as they gave higher scores for softness and flavour attributes. In conclusion, addition of PSC powder to partially replace rice and wheat flour in RP, CC and PB enhance essential nutritional components and well accepted by consumers. Thus, PSC powder can be considered to be utilized in carbohydrate–based food products with the purpose of enhancing nutrient compositions without affecting its sensory acceptance.
    Matched MeSH terms: Flavoring Agents
  5. Nadzirah, K.Z., Zainal, S., Noriham, A., Normah, I., Siti Roha, A.M., Nadya, H.
    MyJurnal
    The aim of this study is to determine colour changes during storage and physico- chemical properties of peel, core and crown extracts of pineapple variety N36 for maturity indices of 1, 2 and 3. The L* (lightness), a* (redness) and b* (yellowness) values for peels increased significantly (p ≤ 0.05) at each maturity stage during seven days storage. pH of pineapple peel, core and crown extracts were in the range of 3.24 to 3.84. The titratable acidity, percentage of pulp and Total Soluble Solid (TSS) of pineapple peel, core and crown extracts were in the range of 0.16 to 0.36%, 1.37 to 2.91% and 1.4 to 5.3˚Brix, respectively. Fructose and glucose contents were significantly highest (p ≤ 0.05) in pineapple core extract followed by pineapple peel extract and pineapple crown extract for maturity index 2. Significant difference (p ≤ 0.05) was found in sucrose content between pineapple core and peel extracts with 8.92% and 3.87%, respectively for maturity index 3. However, sucrose was not detected in pineapple crown extract. Pineapple core extract was significantly higher (p ≤ 0.05) amount of total sugar content compared to pineapple peel and crown extracts for all maturity indices.
    Matched MeSH terms: Flavoring Agents
  6. Herpandi, Huda, N., Rosma, A., Wan Nadiah W. A.
    MyJurnal
    Protein-rich by-products from the canning industry, especially dark flesh of skipjack, have limited uses due to several factors such as darken color, susceptibility to oxidation and off flavour. Protein hydrolysates from skipjack dark flesh was produced with different type of industrial proteases (Alcalase®2.4L FG, Protamex®, Neutrase®1.5MG and Flavourzyme®500MG) for 60, 120, 180 and 240 min with level of proteases used of 0.5, 1, 1.5 and 2% per weight of raw material. The degree of hydrolysis and free tryptophan content of hydrolysate were investigated. The results shows longer time with higher concentration of enzyme has increased the degree of hydrolysis. Alcalase®2.4L FG had the highest degree of hydrolysis among all proteases followed by Protamex®, Flavourzyme®500MG and Neutrase® 1.5MG. All enzymes increase free tryptophan content linearly with the increament of protease enzyme level. The longer the hydrolysis time, the higher the content of free tryptophan produced.
    Matched MeSH terms: Flavoring Agents
  7. Lim, J.Y., Wan Rosli, W.l.
    MyJurnal
    Consumption of dietary fibre-rich food has been associated with various beneficial physiological properties and health effects. Presently, different types of natural fibre-rich ingredients are added into variety of bakery-based products to improve it fibre content for health promotional purposes. However, majority of these products are frequently added with imported dietary fibre ingredients. In the present study, bread samples were prepared with Zea mays ear (young corn) powder at the levels of either 2%, 4% or 6%. The bread samples were analyzed for nutritional composition, textural properties and sensory acceptance. Addition of young corn powder (YCP) at the level of 6% increases total dietary fibre (from 3.48% to 5.26%), moisture (from 25.64% to 26.55%), fat (from 4.35% to 4.61%) and protein content (from 9.13% to 9.51%) significantly. However, with the increasing of YCP levels in the bread, the carbohydrate content was decreased significantly (from 59.93% to 58.34%) while the ash content (from 0.95% to 0.99%) was not significantly affected. Results of texture profile analysis indicated that addition of YCP up to 6% not significantly affected the springiness (1.01-1.00) but significantly decreased cohesiveness (0.95-0.82). However, the addition of YCP up to 6% has increased hardness (0.18kg-0.57kg), gumminess (0.17kg-0.47kg) and chewiness (0.18kg-0.47kg) attributes of bread samples. On the other result, the sensory evaluation shows that the flavour score was not significantly affected by addition of YCP up to 4% (4.82-4.52) while the tenderness (4.53-4.42), elasticity (4.75-4.58), aroma (4.40-4.47), colour (4.93-4.55) and overall acceptance (4.80-4.35) scores were not significant affected up to 6%. In summary, breads with 4% addition of YCP were considered to be acceptable and potentially used in improving nutritional composition without changing sensory score.
    Matched MeSH terms: Flavoring Agents
  8. Chye, S.J., Ahmad, R., Noor Aziah, A.A.
    MyJurnal
    This study was carried out to improve the nutritional value of goat’s milk dadih by the addition of tropical-fruit purees, namely, jackfruit (Artocarpus heterophyllus, Lam.), pineapple (Ananas comosus) and papaya (Carica papaya). Dadih with added fruits were compared with the control (without fruit puree) for physical, chemical and sensory attributes. The texture properties of the tropical- fruit dadih were significantly different (p< 0.05) from the control. Control dadih showed highest values for lightness and hue (p< 0.05) as compared to tropical- fruit dadih. The addition of tropical- fruit purees significantly increased (p< 0.05) the moisture, protein, ash and vitamin C contents of the fruit added dadih. There were no significant differences (p> 0.05) in the fat, carbohydrate, energy and total soluble solid contents. Sensory evaluations using a hedonic test showed that all dadih were acceptable. Overall, syneresis of the dadih increased with decreasing pH throughout storage at 4°C.
    Matched MeSH terms: Flavoring Agents
  9. Souad, A.M., Jamal, P., Olorunnisola, K.S.
    MyJurnal
    Watermelon waste materials remained one of the important food grade agro-wastes generated by most hospitality industries in Southeast Asia and particularly in Malaysia. Jam was prepared from watermelon rind with different flavours (vanilla, pineapple, strawberry, lemon and no flavour). Five different samples were prepared at various compositions T₁ (50-50), T₂ (80-20), T₃ (60-40), T₄ (40-60) and T₅ (20-80) of rind and sugar. T₁ (50-50) gave the best jam set. Ten man panel (trained) evaluated the jam for its sensory characteristics and physicochemical analysis. Sensory evaluation conducted among five flavours was significantly different at (p>0.05). Chemical analysis showed that ascorbic acid reduced greatly among all treatments during three month storage. Soluble sugar and pH also decreased gradually for T₁ (from 4.96 to 4.40), T₂ (from 4.92 to 4.21), T₃ (from 4.74 to 4.11), T₄ (from 4.62 to 4.51) and T₅ (from 4.52 to 4.25) upon storage. Strawberry flavoured jam was most acceptable by the panel.
    Matched MeSH terms: Flavoring Agents
  10. Wan Rosli, W.I., Chow, Y.N.
    Malays J Nutr, 2014;20(1):93-99.
    MyJurnal
    Introduction: Scientific evidence indicates that higher dietary fibre consumption protects against various chronic diseases and leads to recovery enhancement. Young corn ear is very rich in total dietary fibre (TDF). The study objective was to evaluate the effects of young corn ear addition on the nutritional composition, textural properties and sensory attributes of conventional cake. Methods: Wheat flour used in the preparation of conventional cake was substituted with different percentages (0%, 5%, 10% and 15%) of young corn ear powder (YCP). Moisture, total ash, fat, protein and TDF content of conventional cake samples were investigated. Textural properties including firmness, cohesiveness, springiness, gumminess and chewiness were examined. The aroma, colour, chewiness, tenderness, flavour and overall acceptance of conventional cake were evaluated via sensory evaluation. Results: The conventional cake with addition of 15% YCP recorded the highest moisture content. There was no predictable trend observed in the ash and fat content following the incorporation of YCP. Addition of 15% of YCP increased the protein content significantly while TDF content of conventional cake increased proportionally (1.42%-2.88%) with the level of YCP added. The incorporation of YCP did not produce any trend on all the textural properties of conventional cake. Conventional cake with 10% of YCP was the most preferred manifested by the highest scores in chewiness, tenderness and flavour attributes. Conclusion: In conclusion, 10% of YCP could be recommended as the ideal formulation in order to produce a healthier conventional cake without jeopardising acceptability.
    Matched MeSH terms: Flavoring Agents
  11. Phebe, D., Ong, P.T.
    MyJurnal
    ‘Kampuchea’ guavas were treated with 300, 600 and 900 nL L‾¹ 1-methylcyclopropene (1-MCP) for 0,
    3 and 6 h, and stored at 27˚C with 70% relative humidity. The C* values, soluble solids concentration, titratable acidity and pH of these fruits were not affected by both the 1-MCP concentrations and exposure duration while h˚ values and flesh firmness were affected by these treatments. The L* values, vitamin C content and weight loss were affected by the concentrations of 1-MCP, but not by the exposure duration. Less weight loss and disease incidence in fruit treated with 600 and 900 nL L-1 1-MCP. Fruit exposed to 6 h 1-MCP showed lowest disease incidence compared to other exposure duration in 5 days of storage. Treating Kampuchea guava fruit with 600 nL L‾¹ 1-MCP and exposure duration of 6 h was able to retain fruit colour, flesh firmness and delayed disease development for 5 days.
    Matched MeSH terms: Flavoring Agents
  12. Nor NM, Carr A, Hardacre A, Brennan CS
    Foods, 2013 May 14;2(2):160-169.
    PMID: 28239106 DOI: 10.3390/foods2020160
    Pumpkin products confer natural sweetness, desirable flavours and β-carotene, a vitamin A precursor when added as ingredients to extruded snacks. Therefore, a potential use for dried pumpkin flour is as an ingredient in ready-to-eat (RTE) snack foods. Growth in this market has driven food manufacturers to produce a variety of new high value snack foods incorporating diverse ingredients to enhance the appearance and nutritional properties of these foods. Ready-to-eat snacks were made by extruding corn grits with 5%, 10%, 15% and 20% of pumpkin flour. Snacks made from 100% corn grits were used as control products for this work. The effect of formulation and screw speeds of 250 rpm and 350 rpm on torque and specific mechanical energy (SME, kWh/kg), physical characteristics (expansion ratio, bulk density, true density and hardness) and the microstructure of the snacks were studied. Increasing the screw speed resulted in a decrease of torque for all formulations. When pumpkin flour was added the specific mechanical energy (SME) decreased by approximately 45%. Increasing the percentage of pumpkin flour at the higher screw speed resulted in a harder texture for the extruded products. X-ray tomography of pumpkin flour-corn grit snacks showed that increased levels of pumpkin flour decreased both the bubble area and bubble size. However, no significant differences (p > 0.05) in bubble wall thickness were measured. By understanding the conditions during extrusion, desirable nutritional characteristics can be incorporated while maximizing expansion to make a product with low bulk density, a fine bubble structure and acceptable organoleptic properties.
    Matched MeSH terms: Flavoring Agents
  13. Mazlin Mohideen, Mohamad Iqbal Hazmie Idris, Nor Syamimi Izzati Zainal Abidin, Nur Azzalia Kamaruzaman
    MyJurnal
    Kaffir lime or “limau purut” (Citrus hystrix) is a popular traditional herbal plant with aromatic leaves. It produces fruits which are commonly used in Asian cuisines as a flavouring agent. Essential oil has been a popular and valuable product applicable in various industries, but its availability is scarce. Essential oil from the leaves of Citrus hystrix is a complex mixture of volatile and semi-volatile compounds. It is rich in bioactive molecules that act synergistically to improve the well-being of an individual. Essential oil is extracted from Citrus hystrix leaves using a few extraction methods; however, the most excellent extraction methods have yet to be ascertained. This review paper highlights several extraction methods that determined the final yield of Citrus hystrix leaves’ essential oil and the comparison of advantages and disadvantages between each method. Two types of methods are discussed, which are conventional and modern methods. Conventional methods include hydro-distillation, steam distillation, Soxhlet distillation and solvent extraction, while the modern method includes pressurized liquid extraction (PLE). In addition, pre- treatment processes are also included as they can significantly affect the performance of other important processes and production yield. This paper also found that the highest yield of 56.16% was obtained using PLE method. Essentially, each of the extraction and pre-treatment methods has its own pros and cons; hence choosing a suitable method depends heavily on the producer's demand and requirement.
    Matched MeSH terms: Flavoring Agents
  14. Ha Rahim Z, M Bakri M, Hm Z, Ia A, Na Z
    Pak J Med Sci, 2014 Mar;30(2):404-8.
    PMID: 24772152
    In children, excessive ingestion of fluoride from different sources including bottled drinking water and flavoured beverages or soft drinks can lead to the development of dental fluorosis. In addition, the pH level of beverages is important. Low pH can cause dental erosion. In this study we explore the fluoride content and pH level of certain popular beverages available in Malaysian supermarkets and hawkers' stalls.
    Matched MeSH terms: Flavoring Agents
  15. Tan MM, Chan CK, Reidpath DD
    PMID: 24319472 DOI: 10.1155/2013/146214
    Objectives. To systematically review articles investigating the relationship between religion and spirituality (R/S) and fruit, vegetable, and fat intake. Methods. PubMed, CINAHL, and PsycInfo were searched for studies published in English prior to March 2013. The studies were divided into two categories: denominational studies and degree of R/S studies. The degree of R/S studies was further analyzed to (1) determine the categories of R/S measures and their relationship with fruit, vegetable, and fat intake, (2) evaluate the quality of the R/S measures and the research design, and (3) determine the categories of reported relationship. Results. Thirty-nine studies were identified. There were 14 denominational studies and 21 degree of R/S studies, and 4 studies were a combination of both. Only 20% of the studies reported validity and 52% reported reliability of the R/S measures used. All studies were cross-sectional, and only one attempted mediation analysis. Most studies showed a positive association with fruit and vegetable intake and a mixed association with fat intake. Conclusion. The positive association between R/S and fruit and vegetable intake may be one possible link between R/S and positive health outcome. However, the association with fat intake was mixed, and recommendations for future research are made.
    Matched MeSH terms: Flavoring Agents
  16. Chuah LO, Ho WY, Beh BK, Yeap SK
    PMID: 23990846 DOI: 10.1155/2013/751658
    Garcinia is a plant under the family of Clusiaceae that is commonly used as a flavouring agent. Various phytochemicals including flavonoids and organic acid have been identified in this plant. Among all types of organic acids, hydroxycitric acid or more specifically (-)-hydroxycitric acid has been identified as a potential supplement for weight management and as antiobesity agent. Various in vivo studies have contributed to the understanding of the anti-obesity effects of Garcinia/hydroxycitric acid via regulation of serotonin level and glucose uptake. Besides, it also helps to enhance fat oxidation while reducing de novo lipogenesis. However, results from clinical studies showed both negative and positive antiobesity effects of Garcinia/hydroxycitric acid. This review was prepared to summarise the update of chemical constituents, significance of in vivo/clinical anti-obesity effects, and the importance of the current market potential of Garcinia/hydroxycitric acid.
    Matched MeSH terms: Flavoring Agents
  17. Feng Y, Ping Tan C, Zhou C, Yagoub AEA, Xu B, Sun Y, et al.
    Food Chem, 2020 Sep 15;324:126883.
    PMID: 32344350 DOI: 10.1016/j.foodchem.2020.126883
    Freeze-thaw cycles (FTC) pretreatment was employed before the vacuum freeze-drying of garlic slices, aimed at improving the drying process and the quality of the end product. Cell viability, water status, internal structure, flavor, chemical composition and thermogravimetric of garlic samples were evaluated. The results indicated that FTC pretreatment reduced the drying time (22.22%-33.33%) and the energy consumption (14.25%-15.50%), owing to the water loss, the increase in free water, and the formation of porous structures. The FTC pretreatment improved thermal stability, flavor and chemical composition content of dried products. The antioxidant activity of polysaccharides extracted from FTC pretreated dried products was higher than that of the unpretreated dried product due to the reduction in polysaccharide molecular weight. This research could pave a route for future production of dried garlic slices having good quality by using the FTC pretreatment, with lower energy consumption and shorter drying time.
    Matched MeSH terms: Flavoring Agents/analysis
  18. Zzaman W, Bhat R, Yang TA, Easa AM
    J Sci Food Agric, 2017 Oct;97(13):4429-4437.
    PMID: 28251656 DOI: 10.1002/jsfa.8302
    BACKGROUND: Roasting is one of the important unit operations in the cocoa-based industries in order to develop unique flavour in products. Cocoa beans were subjected to roasting at different temperatures and times using superheated steam. The influence of roasting temperature (150-250°C) and time (10-50 min) on sugars, free amino acids and volatile flavouring compounds were investigated.

    RESULTS: The concentration of total reducing sugars was reduced by up to 64.61, 77.22 and 82.52% with increased roasting temperature at 150, 200 and 250°C for 50 min, respectively. The hydrophobic amino acids were reduced up to 29.21, 36.41 and 48.87% with increased roasting temperature at 150, 200 and 250°C for 50 min, respectively. A number of pyrazines, esters, aldehydes, alcohols, ketones, carboxyl acids and hydrocarbons were detected in all the samples at different concentration range. Formation of the most flavour active compounds, pyrazines, were the highest concentration (2.96 mg kg-1 ) at 200°C for 10 min.

    CONCLUSION: The superheated steam roasting method achieves the optimum roasting condition within a short duration Therefore, the quality of cocoa beans can be improved using superheated steam during the roasting process. © 2017 Society of Chemical Industry.

    Matched MeSH terms: Flavoring Agents/chemistry*
  19. Mohamed HN, Man YC, Mustafa S, Manap YA
    Molecules, 2012 May 03;17(5):5062-80.
    PMID: 22555296 DOI: 10.3390/molecules17055062
    Budu is a famous Malaysian fish sauce, usually used as seasoning and condiment in cooking. Budu is produced by mixing fish and salt at certain ratio followed by fermentation for six months in closed tanks. In this study, four commercial brands of Budu were analyzed for their chemical properties (pH, salt content and volatile compounds). The pH of Budu samples ranged from 4.50-4.92, while the salt (NaCl) content ranged between 11.80% and 22.50% (w/v). For tentative identification of volatile flavor compounds in Budu, two GC columns have been used, DB-WAX and HP-5MS. A total of 44 volatile compounds have been detected and 16 were common for both columns. 3-Methyl-1-butanol, 2-methylbutanal, 3-methylbutanal, dimethyl disulfide, 3-(methylthio)-propanal, 3-methylbutanoic acid and benzaldehye have been identified as the aroma-active compounds in Budu due to their lower threshold values.
    Matched MeSH terms: Flavoring Agents/analysis*
  20. Tan PY, Tan CP, Abas F, Ho CW, Mustapha WA
    Molecules, 2013 Jun 10;18(6):6792-803.
    PMID: 23752466 DOI: 10.3390/molecules18066792
    Palm sugar-like flavouring (PSLF) is a type of flavour product that is formed by heating amino acids and sugar under specific heating conditions. Unfortunately, PSLF has a salty taste and contains high amounts of acrylamide. Hence, the objective of this research was to reduce saltiness and acrylamide without negatively affecting the aroma properties of PSLF. A decrease in the sodium phosphate (NaHPO₄) buffer concentration from 0.20 to 0.02 M was found to reduce sodium to approximately 15% of the level found in original PSLF. A further decrease (~25%) in the sodium content was achieved by removing monobasic sodium phosphate (NaH₂PO₄) from the buffer system. Meanwhile, the addition of CaCl₂ at 20-40 mg/L reduced the acrylamide content in PSLF by as much as 58%. A CaCl₂ concentration of 20 mg/mL was most favourable as it most efficiently suppressed acrylamide formation while providing an acceptably high flavour yield in PSLF. In view of the high acrylamide content in PSLF, additional work is necessary to further reduce the amount of acrylamide by controlling the asparagine concentration in the precursor mixture.
    Matched MeSH terms: Flavoring Agents/chemistry*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links