Zerumbone (ZER), a compound derived from the rhizome of Zingiber Zerumbet (L.) Smith, has demonstrated anti-inflammatory properties but suffers from poor water solubility, limiting its clinical application. While ZER's effects on lung inflammation are known, its role in lung fibrosis remains unexplored. Herein, ZER was encapsulated in pH-sensitive liposomes formulated with oleic acid, dipalmitoylphosphatidylcholine, and cholesterol to enhance ZER solubility and delivery to the acidic environment of lung fibrosis. The liposomes were optimized using Box-Behnken design, resulting in an average diameter of 87.8 ± 3.5 nm, a polydispersity index of 0.16 ± 0.2, and a zeta potential of -24 ± 0.32 mV. ZER release from the carrier followed zero-order kinetics and showed higher release in acidic settings. Cascade impactor and HPLC analyses confirmed that ZER liposome powder produced by freeze-drying reached stage 7, indicating effective delivery to deep lung regions. The uptake of ZER liposomes was concentration and pH-dependent, being higher in acidic conditions and greater in MRC-5 cells compared to A549 cells. Notably, ZER liposomes reduced cell migration and downregulated fibrotic markers such as fibronectin, MMP-2, and α-SMA in MRC-5 and A549 cells. This study suggests that ZER liposomes hold promise for treating lung fibrosis and merit further investigation.
Although dietary trans fatty acids can affect plasma lipoproteins negatively in humans, no direct comparison with specific saturated fatty acids has been reported, even though trans fatty acids were designed to replace saturates in foods and food processing. In this study, dietary trans 18:1 [elaidic acid at 5.5% energy (en)] was specifically exchanged for cis 18:1, 16:0 or 12:0 + 14:0 in 27 male and female subjects consuming moderate fat (31% en), low cholesterol (<225 mg/d) whole food diets during 4-wk diet periods in a crossover design. The trans-rich fat significantly elevated total cholesterol and LDL cholesterol relative to the 16:0-rich and 18:1-rich fats and uniquely depressed HDL cholesterol relative to all of the fats tested. Trans fatty acids also elevated lipoprotein (a) [Lp(a)] values relative to all dietary treatments. Furthermore, identical effects on lipoproteins were elicited by 16:0 and cis 18:1 in these subjects. The current results suggest that elaidic acid, one of the principal trans isomers produced during industrial hydrogenation of edible oils, adversely affects plasma lipoproteins. Thus, the negative effect of elaidic acid on the lipoprotein profile of humans appears to be unmatched by any other natural fatty acid(s).
The present study investigates the detection of lard in cocoa butter through changes in fatty acids composition, triacylglycerols profile, and thermal characteristics. Cocoa butter was mixed with 1% to 30% (v/v) of lard and analyzed using a gas chromatography flame ionization detector, high performance liquid chromatography, and differential scanning calorimetry. The results revealed that the mixing of lard in cocoa butter showed an increased amount of oleic acid in the cocoa butter while there was a decrease in the amount of palmitic acid and stearic acids. The amount of POS, SOS, and POP also decreased with the addition of lard. A heating thermogram from the DSC analysis showed that as the concentration of lard increased from 3% to 30%, two minor peaks at -26 °C and 34.5 °C started to appear and a minor peak at 34.5 °C gradually overlapped with the neighbouring major peak. A cooling thermogram of the above adulterated cocoa butter showed a minor peak shift to a lower temperature of -36 °C to -41.5 °C. Values from this study could be used as a basis for the identification of lard from other fats in the food authentication process.
The bioactive compounds and "in vitro" antioxidant activity measured by three antioxidant assays of some traditional and non-traditional cold-pressed edible oils from Macedonia were object of this study. The fatty acid composition showed dominance of monounsaturated oleic acid in "sweet" and "bitter" apricot kernel oils with percentages of 66.7 ± 0.5 and 57.8 ± 0.3%, respectively. The most dominant fatty acid in paprika seed oil was polyunsaturated linoleic acid with abundance of 69.6 ± 2.3%. The most abundant tocopherol was γ-tocopherol with the highest quantity in sesame seed oil (57.6 ± 0.1 mg/100 g oil). Paprika seed oil, sesame seed oil and sweet apricot oil were the richest source of phytosterols. DPPH assay was the most appropriate for the determination of the antioxidant activity of cold-pressed sunflower oil due to high abundance of α-tocopherol with a level of 22.8 ± 1.1 mg/100 g of oil. TEAC assay is the best for the determination of the antioxidant activity of sesame seed oil and paprika seed oils as the richest sources of phenolic compounds. β-carotene assay was the most suitable assay for oils obtained from high pigmented plant material. Triacylglycerols and phytosterol profiles can be used as useful markers for the origin, variety and purity of the oils.
Mushrooms have been highly regarded as possessing enormous nutritive and medicinal values. In the present study, we evaluated the anti-oxidative and anti-atherosclerotic potential of shiitake mushroom (Lentinula edodes) using its solvent-solvent partitioned fractions that consisted of methanol:dichloromethane (M:DCM), hexane (HEX), dichloromethane (DCM), ethyl acetate (EA) and aqueous residue (AQ). The hexane fraction (1 mg/mL) mostly scavenged (67.38%, IC50 0.55 mg/mL) the 2,2-diphenyl-1-picryl hydrazyl (DPPH) free radical, contained the highest reducing capacity (60.16 mg gallic acid equivalents/g fraction), and most potently inhibited lipid peroxidation (67.07%), low density lipo-protein oxidation and the activity of 3-hydroxy 3-methyl glutaryl co-enzyme A reductase (HMGR). GC-MS analyses of the hexane fraction identified α-tocopherol (vitamin E), oleic acid, linoleic acid, ergosterol and butyric acid as the bio-functional components present in L. edodes. Our findings suggest that L. edodes possesses anti-atherosclerotic bio-functionality that can be applied as functional food-based therapeutics against cardiovascular diseases.
Oleic acid (OA) capped wolfram (VI) oxide, WO3 nanoparticles were chemically synthesized and characterized by means of Fourier Transform-Infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM). The tribological properties of the capped WO3 nanoparticles as an additive in base oils were investigated using a four-ball machine. Results show that OA-capped WO3 nanoparticles are able to prevent water adsorption and capable of being dispersed stable in organic solvents which is base oils. The as-prepared capped WO3 nanoparticles have an average size of 15 nm. In addition, OA-capped WO3 nanoparticles as an additive in base oils perform good anti-wear (AW) and anti-friction (AF) properties owing to the formation of a boundary film.
Fats and oils in human diets are the main sources of essential fatty acids for the body. However, there is a mounting concern about the intake of foods containing trans fatty acids (TFAs) due to their deleterious effects on human. Thus, the accurate detection of fatty acids (FAs) and TFAs is needed to control and correct nutrition labeling in dietary fat samples. Accordingly, a method for the identification and quantification of FAs and TFAs in food fats by gas chromatography (GC) based on the extraction of lipids and derivatization using base catalyzed followed by trimethylsilyl-diazomethane (TMS-DM) was developed. The proposed method was evaluated to standard mixture of oleic acid (OA) (C18:1cis 9) and Elaidic acid (EA) (C18:1 trans 9) and its application to three samples of commercial margarines was demonstrated. Based on the results obtained, recovery values (R) from all the samples were close to 100%. Repeatability (RSD) values ranged between 0.78 and 2.47%, while Reproducibility (RSD) values ranged between 1.14 and 3.65%. Consequently, the proposed method is sensitive, accurate and suitable for FAs and TFAs analysis of food fats and oils and can be applied to nutritional, medicine and food studies.
Kappa-carrageenan is one form of necessary hydrocolloid. Hydrocolloids are macromolecular materials, which swell upon absorption of water; in some cases, forming a stiff gel in the presence of additives. This property is very important to suspend nanocarriers into gel network, which provide them long time stability at a varying temperature range. In this work, we prepared microemulsion and trapped these particles inside the kappa-carrageenan gel network. The microemulsion was composed of sodium N-lauroylsarcosinate hydrate (SNLS), oleic acid and deionized water. The purpose of this study was to immobilize them into the gel network, giving longer shelf life at a range of temperatures for oral drug delivery. Morphological properties were investigated by transmission electron microscope (TEM), dynamic light scattering (DLS) and Fourier transform infrared (FTIR) spectra. The TEM results showed that microemulsions are trapped in the gel network, and the diameter of the microemulsions are below 100 nm, which is comparable with the DLS results. The important functional groups of kappa-carrageenan and microemulsion were shown from the FTIR result of the complex microemulsion gel. These results confirmed the interaction between SNLS based microemulsion and kappa- carrageenan gel.
Third generation biofuels, also known as microalgal biofuels, are promising alternatives to fossil fuels. One attractive option is microalgal biodiesel as a replacement for diesel fuel. Chlamydomonas sp. Tai-03 was previously optimized for maximal lipid production for biodiesel generation, achieving biomass growth and productivity of 3.48 ± 0.04 g/L and 0.43 ± 0.01 g/L/d, with lipid content and productivity of 28.6 ± 1.41% and 124.1 ± 7.57 mg/L/d. In this study, further optimization using 5% CO2 concentration and semi-batch operation with 25% medium replacement ratio, enhanced the biomass growth and productivity to 4.15 ± 0.12 g/L and 1.23 ± 0.02 g/L/d, with lipid content and productivity of 19.4 ± 2.0% and 239.6 ± 24.8 mg/L/d. The major fatty acid methyl esters (FAMEs) were palmitic acid (C16:0), oleic acid (C18:1), and linoleic acid (C18:2). These short-chain FAMEs combined with high growth make Chlamydomonas sp. Tai-03 a suitable candidate for biodiesel synthesis.
We report the self-assembly of an extensive inter-ligand hydrogen-bonding network of octylphosphonates on the surface of cesium lead bromide nanocrystals (CsPbBr3 NCs). The post-synthetic addition of octylphosphonic acid to oleic acid/oleylamine-capped CsPbBr3 NCs promoted the attachment of octylphosphonate to the NC surface, while the remaining oleylammonium ligands maintained the high dispersability of the NCs in non-polar solvent. Through powerful 2D solid-state 31P-1H NMR, we demonstrated that an ethyl acetate/acetonitrile purification regime was crucial for initiating the self-assembly of extensive octylphosphonate chains. Octylphosphonate ligands were found to preferentially bind in a monodentate mode through P-O-, leaving polar P[double bond, length as m-dash]O and P-OH groups free to form inter-ligand hydrogen bonds. The octylphosphonate ligand network strongly passivated the nanocrystal surface, yielding a fully-purified CsPbBr3 NC ink with PLQY of 62%, over 3 times higher than untreated NCs. We translated this to LED devices, achieving maximum external quantum efficiency and luminance of 7.74% and 1022 cd m-2 with OPA treatment, as opposed to 3.59% and 229 cd m-2 for untreated CsPbBr3 NCs. This represents one of the highest efficiency LEDs obtained for all-inorganic CsPbBr3 NCs, accomplished through simple, effective passivation and purification processes. The robust binding of octylphosphonates to the perovskite lattice, and specifically their ability to interlink through hydrogen bonding, offers a promising passivation approach which could potentially be beneficial across a breadth of halide perovskite optoelectronic applications.
Naturally derived antimicrobial peptides (AMPs) are an attractive source of new antimicrobial agents. However, clinical application of AMPs is associated with poor bioavailability and toxicity. In this study, we address these limitations by designing a new series of chitosan derivatives to mimic the amphiphilic topology of AMPs. The synthesized chitosan derivatives were found to self-assemble into nanoparticles in the aqueous environment. Among the compounds, a chitosan derivative grafted with arginine and oleic acid (CH-Arg-OA) exhibited the most potent antimicrobial activity, especially against Gram-negative bacteria. It also caused minimal cell death when tested in HEK293 and HepG2 cell lines, thus confirming the role of cationicity and lipophilicity for selective bacteria targeting. CH-Arg-OA exhibited its antimicrobial activity by disrupting bacterial membranes and causing the leakage of cytoplasmic contents. Thus, amphiphilic chitosan nanoparticles offer a great promise as a new class of AMPs mimics that is effective against Gram-negative bacteria.
Polygonum minus is a plant rich with bioactive components that contribute to food, pharmaceutical, and perfume industries. However, high moisture content in fresh plants will allow
microbial activity that leads to the degradation of plant quality. This can be prevented by
drying the fresh plants to preserve the characteristics of their bioactive components. The
present work was conducted to determine the effect of different drying methods such as
air-drying, oven-drying (40 and 60°C), and freeze-drying on essential oil (EO) yield and
chemical compounds of P. minus roots. For comparison purposes, all samples were extracted
by maceration with n-hexane at room temperature. Then, the samples were analysed and
identified by using gas chromatography-mass spectrometry (GC-MS). The highest EO yield
extract was obtained from freeze-drying (4.15 ± 0.5), followed by air-drying (3.79 ± 0.19). EO
yield from oven-drying at 40 and 60°C was 3.4 ± 0.14 and 0.86 ± 0.04, respectively. Results
showed that by increasing the drying temperature, the EO yield would decrease and cause a
loss of major chemical compounds in the P. minus root. Air-drying was found to be the best
method in preserving the presence of important chemical compound in P. minus roots such as
β-caryophyllene (1.43%), pentadecane (4.34%), hexadecanoic acid (3.91%) and oleic acid
(3.97%).
Date palm is an important plant in arid regions with more than 20 varieties reported all over the world. Date seed is a byproduct of date fruit industry which is normally being discarded, used as animal feed ingredient or turned into non-caffeinated coffee by the Arabs. About 11-18% of date fruit weight is the seed which is composed of carbohydrates, dietary fiber, fat, ash and protein. In addition, the antioxidant content in date seed oil (DSO) was found to be comparable with olive oil, which can be as a good source of antioxidant in order to fulfill the consumers demand. Oleic acid is the major fatty acid found in DSO, followed by lauric, linoleic, palmitic and myristic acid. However, different varieties of date fruits have different fatty acid compositions. This paper reviewed the potential use of date seed and date seed oil in order to discover and develop its usage and find out the suitable application of these seed and oil.
Mycelium-bound lipase (MBL) was prepared using a strain of Geotrichum candidum isolated from local soil. At the time of maximum lipase activity (54 h), the mycelia to which the lipase was bound were harvested by filtration and centrifugation. Dry MBL was prepared by lyophilizing the mycelia obtained. The yield of MBL was 3.66 g/l with a protein content of 44.11 mg/g. The lipase activity and specific lipase activity were 22.59 and 510 U/g protein, respectively. The moisture content of the MBL was 3.85%. The activity of free (extracellular) lipase in the culture supernatant (after removal of mycelia) was less than 0.2 U/ml. The MBL showed selectivity for oleic acid over palmitic acid during hydrolysis of palm olein, indicating that the lipase from G. candidum displayed high substrate selectivity for unsaturated fatty acid containing a cis-9 double bond, even in crude form. This unique specificity of MBL could be a direct, simple and inexpensive way in the fats and oil industry for the selective hydrolysis or transesterification of cis-9 fatty acid residues in natural triacylglycerols.
The present study was carried out to characterize red fruit (Pandanus conoideus Lam) oil (RFO) in term of FTIR spectra, fatty acid composition, and volatile compounds. FTIR spectrum of RFO was slightly
different from other common vegetable oils and animal fats, in which in the frequency range of 1750 – 1700 cm-1, RFO appear two bands. The main fatty acid composition of RFO is oleic acid accounting for 68.80% followed by linoleic acid with the concentration of 8.49%. The main volatile compounds of RFO as determined using gas chromatography coupled with mass spectrometry (GC-MS) and headspace analyser are 1,3-dimethylbenzene (27.46%), N-glycyl- L-alanine (17.36%), trichloromethane (15.22%), and ethane (11.43%).
Studies were conducted to assess the percutaneous absorption of the triacyglycerols (TAGs), tocols and carotenoids present in crude and refined palm oil. In vitro experiments using upright Franz diffusion cells were employed to investigate the permeability of these compounds across full thickness human skin and into the receptor solution. Cetrimide, a cationic surfactant was chosen to be used as a solubilising agent in the receptor phase with an optimum concentration of 3.0 mg/mL and was able to provide sink conditions throughout the permeation. TAGs, tocols and carotenoids all permeated human skin from crude palm oil (CPO), whereas only TAGs permeated when refined palm oil (RPO) was used. Of the TAGs, oleic acid-containing TAGs was preferentially absorbed despite palmitic acid being the most prevalent fatty acid (FA) in TAGs. Tocols in the form of α-T3 showed the highest permeation followed by γ-T3, α-T and the lowest permeation was observed for δ-T3. Carotenoids (α-carotene and β-carotene) also showed an appreciable amount of permeation from CPO.
UV-curable hyperbranched urethane acrylate (HBPUA) from oleic acid of palm oil has been synthesized through a medium aided by p-toluene sulfonic acid as a catalyst. This mixture was then used as the core (HBP) and reacted with palm oil oleic acid to form the hyperbranched polyol (HBP-1). HBPUA was prepared by reacting HBP-1 resin with diisocyanate and hydroxyl-containing acrylate monomer with the presence of 0.1-2 wt% dibutyltin dilaurate as a catalyst. The reaction was confirmed by several analytical data i.e. hydroxyl value (OHV), Fourier Transform infrared (FTIR) spectroscopy, gel permeation chromatography (GPC) and nuclear magnetic resonance (NMR) spectroscopy analyses. The HBPUA was easily curable when subjected to ultraviolet (UV) radiation.
This study was conducted to ascertain the cytotoxicity effect of oil palm (Elaeis guineensis) kernel protein hydrolysates (OPKHs) produced from its protein isolate. A modified microplate titer WST-1 [2-(4-iodophenyl)-3-(4-nitrophenyl)-5-(2,4-disulfophenyl)-2H-tetrazolium] assay was used to investigate the cytotoxicity of hydrolysates produced from protease and pepsin-pancreatin hydrolysis at various concentrations (0.1, 1, 10, 100 μg/ml and 1 mg/ml) using HepG2 cell model. Additionally, peptide stimulation test using OPKHs at 1 mg/ml was carried out to investigate whether OPKHs could serve as growth factor for HepG2 cells other than affecting its viability. As a result, oleic acid appeared to normalize the WST-1 readings of HepG2 cells treated with both hydrolysates at 1 mg/ml. The presence of amino acids in OPKHs could stimulate the growth and prolongs the viability of HepG2 cells. Both OPKHs were non-cytotoxic to HepG2 cells at all tested concentrations even at high concentrations. This study indicated that pepsin-pancreatin and protease hydrolysates produced from oil palm kernel protein were non-cytotoxic on HepG2 cells.
A study was carried out to compare the composition and thermal profiles of the fat component of six brands of commercial biscuits (BA, BB, BC, BD, BE & BF) with those of lard and palm oil. Extraction of fat from biscuit samples was done using petroleum ether according to the soxhlet extraction procedure. The isolated fat samples along with lard and palm oil were analyzed using gas liquid chromatography (GLC), reversed-phase high performance liquid chromatography (RP-HPLC), and differential scanning calorimetry (DSC). According to GLC analysis, palm oil, lard and all six biscuit brands had either palmitic or oleic acid as major fatty acids. Sn-2 positional analysis of fatty acids showed that oleic (> 60%) as the most dominant fatty acid of palm oil and biscuit brands BA, BB, BC, and BD while palmitic (> 60%) as the most dominant fatty acid of lard and biscuit brands BE and BF. RP-HPLC analysis showed that the triacylglycerol (TAG) profiles of lard and biscuit brands BE and BF were closely similar while those of brands BA, BB, BC, and BD and palm oil were similar. DSC analysis showed that the cooling and heating profiles of lard and brands BE and BF were similar, while those of palm oil and brands BA, BB, BC, and BD were similar. Hence, this study concluded that biscuit brands BE and BF are not suitable for consumers whose religious restriction prohibit the use of lard as food ingredient.
Overuse of antibiotics has led to the development of multi drug resistant strains. Antibiotic resistance is a major drawback in the biomedical field since medical implants are prone to infection by biofilms of antibiotic resistant strains of bacteria. With increasing prevalence of antibiotic resistant pathogenic bacteria, the search for alternative method is utmost importance. In this regard, magnetic nanoparticles are commonly used as a substitute for antibiotics that can circumvent the problem of biofilms growth on the surface of biomedical implants. Iron oxide nanoparticles (IONPs) have unique magnetic properties that can be exploited in various ways in the biomedical applications. IONPs are engineered employing different methods to induce surface functionalization that include the use of polyethyleneimine and oleic acid. IONPs have a mechanical effect on biofilms when in presence of an external magnet. In this review, a detailed description of surface engineered magnetic nanoparticles as ideal antibacterial agents is provided, accompanied by various methods of literature review. This article is protected by copyright. All rights reserved.