MyMedR

Displaying publications 61 - 80 of 511 in total

Abstract:

Sort:

The oil-absorbing property of polyhydroxyalkanoate films and its practical application: a refreshing new outlook for an old degrading material

Sudesh K, Loo CY, Goh LK, Iwata T, Maeda M

Macromol Biosci, 2007 Nov 12;7(11):1199-205.
PMID: 17703476

Polyhydroxyalkanoates (PHAs) have attracted the attention of academia and industry because of their plastic-like properties and biodegradability. However, practical applications as a commodity material have not materialized because of their high production cost and unsatisfactory mechanical properties. PHAs are also believed to have high-value applications as an absorbable biomaterial for tissue engineering and drug-delivery devices because of their biocompatibility. However, research in these areas is still in its very early stages. The main problem faced by proponents of PHAs is the lack of a niche area where PHAs will be the most desired material in terms of its function during use rather than because of its eco-friendly virtues after use. Here, we report on the oil-absorbing property of PHA films and its potential applications. By comparing with some of the existing commercial products, the potential application of PHAs as cosmetic oil-blotting films is revealed for the first time. Besides having the ability to rapidly absorb and retain oil, PHA films also have a natural oil-indicator property, showing obvious changes in opacity following oil absorption. Surface analysis revealed that the surface structures such as porosity and smoothness exert great influence on the rapid oil-absorption properties of the PHA films. These newly discovered properties could be exploited to create a niche area for the practical applications of PHAs.

Matched MeSH terms: Drug Delivery Systems
Fulltext Doxorubicin-loaded cholic acid-polyethyleneimine micelles for targeted delivery of antitumor drugs: synthesis, characterization, and evaluation of their in vitro cytotoxicity

Amjad MW, Amin MC, Katas H, Butt AM

Nanoscale Res Lett, 2012;7(1):687.
PMID: 23270381 DOI: 10.1186/1556-276X-7-687

Doxorubicin-loaded micelles were prepared from a copolymer comprising cholic acid (CA) and polyethyleneimine (PEI) for the delivery of antitumor drugs. The CA-PEI copolymer was synthesized via pairing mediated by N,N'-dicyclohexylcarbodiimide and N-hydroxysuccinimide using dichloromethane as a solvent. Fourier transform infrared and nuclear magnetic resonance analyses were performed to verify the formation of an amide linkage between CA and PEI and doxorubicin localization into the copolymer. Dynamic light scattering and transmission electron microscopy studies revealed that the copolymer could self-assemble into micelles with a spherical morphology and an average diameter of <200 nm. The CA-PEI copolymer was also characterized by X-ray diffraction and differential scanning calorimetry. Doxorubicin-loaded micelles were prepared by dialysis method. A drug release study showed reduced drug release with escalating drug content. In a cytotoxicity assay using human colorectal adenocarcinoma (DLD-1) cells, the doxorubicin-loaded CA-PEI micelles exhibited better antitumor activity than that shown by doxorubicin. This is the first study on CA-PEI micelles as doxorubicin carriers, and this study demonstrated that they are promising candidates as carriers for sustained targeted antitumor drug delivery system.

Matched MeSH terms: Drug Delivery Systems
Glucagon-Like Peptide-1 Formulation--the Present and Future Development in Diabetes Treatment

Lee CY

Basic Clin Pharmacol Toxicol, 2016 Mar;118(3):173-80.
PMID: 26551045 DOI: 10.1111/bcpt.12524

Type 2 diabetes mellitus is a chronic metabolic disorder that has become the fourth leading cause of death in the developed countries. The disorder is characterized by pancreatic β-cells dysfunction, which causes hyperglycaemia leading to several other complications. Treatment by far, which focuses on insulin administration and glycaemic control, has not been satisfactory. Glucagon-like peptide-1 (GLP1) is an endogenous peptide that stimulates post-prandial insulin secretion. Despite being able to mimic the effect of insulin, GLP1 has not been the target drug in diabetes treatment due to the peptide's metabolic instability. After a decade-long effort to improve the pharmacokinetics of GLP1, a number of GLP1 analogues are currently available on the market. The current Minireview does not discuss these drugs but presents strategies that were undertaken to address the weaknesses of the native GLP1, particularly drug delivery techniques used in developing GLP1 nanoparticles and modified GLP1 molecule. The article highlights how each of the selected preparations has improved the efficacy of GLP1, and more importantly, through an overview of these studies, it will provide an insight into strategies that may be adopted in the future in the development of a more effective oral GLP1 formulation.

Matched MeSH terms: Drug Delivery Systems
Immunological axis of curcumin-loaded vesicular drug delivery systems

Chellappan DK, Ng ZY, Wong JY, Hsu A, Wark P, Hansbro N, et al.

Future Med Chem, 2018 04 01;10(8):839-844.
PMID: 29620416 DOI: 10.4155/fmc-2017-0245

Several vesicular systems loaded with curcumin have found their way in the therapeutic applications of several diseases, primarily acting through their immunological pathways. Such systems use particles at a nanoscale range, bringing about their intended use through a range of complex mechanisms. Apart from delivering drug substances into target tissues, these vesicular systems also effectively overcome problems like insolubility and unequal drug distribution. Several mechanisms are explored lately by different workers, and interest over vesicular curcumin has been renewed in the past decade. This commentary discusses several immunological targets in which curcumin is employed in a vesicular form.

Matched MeSH terms: Drug Delivery Systems
Fulltext Potential Antimicrobial Applications of Chitosan Nanoparticles (ChNP)

Rozman NAS, Tong WY, Leong CR, Tan WN, Hasanolbasori MA, Abdullah SZ

J Microbiol Biotechnol, 2019 Jul 28;29(7):1009-1013.
PMID: 31288302 DOI: 10.4014/jmb.1904.04065

Polymeric nanoparticles are widely used for drug delivery due to their biodegradability property. Among the wide array of polymers, chitosan has received growing interest among researchers. It was widely used as a vehicle in polymeric nanoparticles for drug targeting. This review explored the current research on the antimicrobial activity of chitosan nanoparticles (ChNP) and the impact on the clinical applications. The antimicrobial activities of ChNP were widely reported against bacteria, fungi, yeasts and algae, in both in vivo and in vitro studies. For pharmaceutical applications, ChNP were used as antimicrobial coating for promoting wound healing, preventing infections and combating the rise of infectious disease. Besides, ChNP also exhibited significant inhibitory on foodborne microorganisms, particularly on fruits and vegetables. It is noteworthy that ChNP can be also applied to deliver antimicrobial drugs, which further enhance the efficiency and stability of the antimicrobial agent. The present review addresses the potential antimicrobial applications of ChNP from these few aspects.

Matched MeSH terms: Drug Delivery Systems
Fulltext Optimization of Aceclofenac Proniosomes by Using Different Carriers, Part 1: Development and Characterization

Sammour RMF, Taher M, Chatterjee B, Shahiwala A, Mahmood S

Pharmaceutics, 2019 Jul 18;11(7).
PMID: 31323799 DOI: 10.3390/pharmaceutics11070350

In the contemporary medical model world, the proniosomal system has been serving as a new drug delivery system that is considered to significantly enhance the bioavailability of drugs with low water solubility. The application of this system can improve the bioavailability of aceclofenac that is used for the relief of pain and inflammation in osteoarthritis, rheumatoid arthritis, and ankylosing spondylitis. The present study is intended to develop an optimized proniosomal aceclofenac formula by the use of different carriers. Aceclofenac proniosomes have been prepared by slurry method, and different carriers such as maltodextrin, mannitol, and glucose were tried. Prepared proniosomes characterized by differential scanning calorimetry (DSC) analysis and Fourier transform infrared (FTIR) analysis revealed the compatibility of the drug chosen with the ingredient added, powder X-ray diffractometry (XRD) confirmed the amorphous phase of the prepared proniosomes, and finally, the surfactant layer was observed by scanning electron microscopy (SEM). Aceclofenac physical state transformations were confirmed with all formulas but maltodextrin proniosomes exhibited solubility more than other formulations. HPLC method has been used to analyze the niosomes derived from proniosomes in terms of their entrapment capability and drug content. The obtained results revealed that aceclofenac proniosomes can be successfully prepared by using different carriers.

Matched MeSH terms: Drug Delivery Systems
Fulltext Synthesis and Optimization of Mesoporous Silica Nanoparticles for Ruthenium Polypyridyl Drug Delivery

Harun SN, Ahmad H, Lim HN, Chia SL, Gill MR

Pharmaceutics, 2021 Jan 24;13(2).
PMID: 33498795 DOI: 10.3390/pharmaceutics13020150

The ruthenium polypyridyl complex [Ru(dppz)2PIP]2+ (dppz: dipyridophenazine, PIP: (2-(phenyl)-imidazo[4,5-f ][1,10]phenanthroline), or Ru-PIP, is a potential anticancer drug that acts by inhibiting DNA replication. Due to the poor dissolution of Ru-PIP in aqueous media, a drug delivery agent would be a useful approach to overcome its limited bioavailability. Mesoporous silica nanoparticles (MSNs) were synthesized via a co-condensation method by using a phenanthrolinium salt with a 16 carbon length chain (Phen-C16) as the template. Optimization of the synthesis conditions by Box-Behnken design (BBD) generated MSNs with high surface area response at 833.9 m2g-1. Ru-PIP was effectively entrapped in MSNs at 18.84%. Drug release profile analysis showed that Ru-PIP is gradually released, with a cumulative release percentage of approximately 50% at 72 h. The release kinetic profile implied that Ru-PIP was released from MSN by diffusion. The in vitro cytotoxicity of Ru-PIP, both free and MSN-encapsulated, was studied in Hela, A549, and T24 cancer cell lines. While treatment of Ru-PIP alone is moderately cytotoxic, encapsulated Ru-PIP exerted significant cytotoxicity upon all the cell lines, with half maximal inhibitory concentration (IC50) values determined by MTT (([3-(4,5-dimethylthiazol-2-yl)-2,5-dephenyltetrazolium bromide]) assay at 48 h exposure substantially decreasing from >30 µM to <10 µM as a result of MSN encapsulation. The mechanistic potential of cytotoxicity on cell cycle distribution showed an increase in G1/S phase populations in all three cell lines. The findings indicate that MSN is an ideal drug delivery agent, as it is able to sustainably release Ru-PIP by diffusion in a prolonged treatment period.

Matched MeSH terms: Drug Delivery Systems
Fulltext Fabrication and Evaluation of Transdermal Microneedles for a Recombinant Human Keratinocyte Growth Factor

Chellathurai MS, Ling VWT, Palanirajan VK

Turk J Pharm Sci, 2021 Feb 25;18(1):96-103.
PMID: 33634684 DOI: 10.4274/tjps.galenos.2020.21033

Objectives: Microneedle transdermal patches are a combination of hypodermic needles and transdermal patches used to overcome the individual limitations of both injections and patches. The objective of this study was to design a minimally invasive, biodegradable polymeric recombinant human keratinocyte growth factor (rHuKGF) microneedle array and evaluate the prepared biodegradable microneedles using in vitro techniques.
Materials and Methods: Biodegradable polymeric microneedle arrays were fabricated out of poly lactic-co-glycolic acid (PLGA) using the micromolding technique under aseptic conditions, and the morphology of the microneedles was characterized using light microscopy. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis was used to rule out drug-polymer interactions. Standard procedures were used to analyze the prepared microneedle arrays for in vitro drug release and to perform a microneedle insertion test. Enzyme-linked immunosorbent assay was used to quantify rHuKGF.
Results: The PLGA polymer was safe for use in the fabrication of rHuKGF microneedles as there was no interaction between the drug and the polymer. The fabricated rHuKGF microneedle arrays had fully formed microneedles with a height of 600 µm and a base of 300 µm. The drug from the microneedle patch was released in vitro within 30 minutes. The strength of the microneedles in the patch was good, as they were able to reach a depth of 381±3.56 µm into parafilm without any structural change or fracture.
Conclusion: Microneedle transdermal patches were successfully prepared for rHuKGF, and their evaluation suggested excellent quality and uniformity of patch characteristics. This can have potential applications in the therapeutic arena, offering advantages in terms of reduced dosing frequency, improved patient compliance, and bioavailability.

Matched MeSH terms: Drug Delivery Systems
Fulltext Insulin-Loaded Barium Salt Particles Facilitate Oral Delivery of Insulin in Diabetic Rats

Zaman R, Karim ME, Othman I, Zaini A, Chowdhury EH

Pharmaceutics, 2020 Jul 29;12(8).
PMID: 32751231 DOI: 10.3390/pharmaceutics12080710

Oral delivery is considered as the most preferred and yet most challenging mode of drug administration; especially a fragile and sensitive peptide like insulin that shows extremely low bioavailability through the gastro-intestinal (GIT) route. To address this problem, we have designed a novel drug delivery system (DDS) using precipitation-induced Barium (Ba) salt particles. The DDS can load insulin molecules and transport them through the GIT route. There were several in vitro simulation tests carried out to prove the efficiency of Ba salt particles as oral delivery candidates. All three Ba salt particles (BaSO4, BaSO3, and BaCO3) showed very good loading of insulin (>70% in all formulations) and a degree of resistance throughout a wide range of pHs from basic to acidic conditions when assessed by spectrophotometry. Particles and insulin-associated particles were morphologically assessed and characterized using FE-SEM and FT-IR. A set of tests were designed and carried out with mucin to predict whether the particles are potentially capable of overcoming one of the barriers for crossing intestinal epithelium. The mucin binding experiment demonstrated 60-100% of mucin adhesion to the three different particles. FT-IR identifies the characteristic peaks for mucin protein, particles, and particle-mucin complex re-confirming mucin adhesion to the particles. Finally, the effectiveness of nano-insulin was tested on streptozotocin (STZ) induced diabetic rats. A short acting human insulin analog, insulin aspart, was loaded into Ba salt particles at a dose of 100 IU/Kg prior to oral administration. Among the three formulations, insulin aspart-loaded BaSO4 and BaCO3 particles dramatically reduced the existing hyperglycemia. BaSO4 with loaded Insulin showed an onset of glucose-lowering action within 1 hr, with blood glucose level measured significantly lower compared to the 2nd and 3rd h (p < 0.05). Insulin-loaded BaCO3 particles showed a significant decrease in blood glucose level at 1-2 h, although the glucose level started to show a slight rise at 3rd h and by 4th h, it was back to baseline level. However, although BaSO3 particles with loaded insulin showed a trend of reduction in blood glucose level, the reduction was not found to be significant (p < 0.05) at any point in time. Therefore, oral formulations of insulin/BaSO4 and insulin/BaCO3 particles were observed as effective as native insulin aspart subcutaneous formulation in terms of onset and duration of action. Further investigation will be needed to reveal bioavailability and mechanism of action of this novel Nano-Insulin formulations.

Matched MeSH terms: Drug Delivery Systems
Fulltext Targeting dendritic cells through gold nanoparticles: A review on the cellular uptake and subsequent immunological properties

Ahmad S, Zamry AA, Tan HT, Wong KK, Lim J, Mohamud R

Mol Immunol, 2017 11;91:123-133.
PMID: 28898717 DOI: 10.1016/j.molimm.2017.09.001

Gold nanoparticles (NPs) have been proposed as a highly potential tool in immunotherapies due to its advantageous properties including customizable size and shapes, surface functionality and biocompatibility. Dendritic cells (DCs), the sentinels of immune response, have been of interest to be manipulated by using gold NPs for targeted delivery of immunotherapeutic agent. Researches done especially in human DCs showed a variation of gold NPs effects on cellular uptake and internalization, DC maturation and subsequent T cells priming as well as cytotoxicity. In this review, we describe the synthesis and physiochemical properties of gold NPs as well as the importance of gold NPs in immunotherapies through their actions on human DCs.

Matched MeSH terms: Drug Delivery Systems
Fulltext Gliclazide loaded PLGA-HPMC second generation nanocrystals for oral delivery: design, development and in vitro performance characterization

Krishnamoorthy R., Bibhu Prasad Panda, Shivashekaregowda N. K. H., Low B. S., Bhattamisra S. K.

Malaysian Journal of Medicine and Health Sciences, 2019;15(102):44-44.
MyJurnal

Introduction: Second generation functionalized nanocrystal is the advancement of nanocrystal technology with great potential to accommodate BCS (Biopharmaceutical Classification System) class II drugs to meet their formulation and drug delivery challenges. Gliclazide is a BCS class II drug used in the treatment of type 2 diabetes, shows poor water solubility and low rate of dissolution, leads to poor and variable oral bioavailability. The second generation poly(D,L-lactide-co-glycolide) (PLGA) Hydroxypropyl methylcellulose (HPMC) based functionalized nanocrystals of gliclazide were prepared by a combination method of emulsion diffusion-high pressure homogenization-solvent evaporation. Methods: Gliclazide second generation nanocrystals were fabricated with taguchi orthogonal experimental design in combination of step up and top down nanoformulation strategies using drug-polymer (PLGA) ratio at 1:0.5, 1:0.75, 1:1 with HPMC(0.5, 0.75, 1% w/v) as stabilizer. The formulated gliclazide PLGA-HPMC nanocrystals were investigated on particle size, polydispersity index, zeta potential, solubility study, drug entrapment efficiency, in vitro drug release, and surface morphology and compatibility studies. The gliclazide PLGA nanocrystals formulation was prepared with Drug : PLGA at 1: 1 ratio with concentrations 0.75% w/v HPMC at 5 homogenization cycles with 1000bar produce optimized gliclazide nanocrystals. Results: The optimized MSGNC8 formulation
showed particle size of 239.9 nm, entrapment efficiency 98.62%, and drug release of 43.75%, 82.12% and 98.08% at 3hrs, 24hrs, and 48hrs compared to pure gliclazide % drug release of 28.73%, 67.51% and 78.41% at 3hrs, 24hrs, 48hrs respectively. The solubility study of optimized formulation shows eight folds increased in saturation solubility compared to pure drug. Scanning electron microscopy (SEM) analysis of the gliclazide nanocrystals revealed that
gliclazide retained its crystal morphology in polymeric nanocrystals. Further, fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) studies on gliclazide PLGA-HPMC nanocrystals emphasize drug and excipient compatibility in development of gliclazide nanocrystals. Conclusion: The potential outcomes of research findings emphasize that the developed gliclazide second-generation nanocrystals, which resulted in increase in drug solubility and rate of dissolution with delayed modified release, can be explored in delivery of gliclazide for type 2 diabetes management.

Matched MeSH terms: Drug Delivery Systems
Fulltext Electrospun deferoxamine nanofiber for diabetic wound healing

Tracey Anastacia Jeckson, Sreenivas Patro Sisinthy, Neo Yun Ping

Malaysian Journal of Medicine and Health Sciences, 2019;15(102):46-46.
MyJurnal

Introduction: Diabetic foot ulcer (DFU) is the most distressing complication of diabetes mellitus and often associated with risk of non-traumatic lower extremity amputations. Available formulations and wound dressings for DFU treatment are unfortunately less effective both on controlling and healing DFU. Issues commonly found are associated with providing an optimum environment which facilitates healing process; moist environment, effective oxygen exchange, preventing infection, controlling exudate and also patients compliance. The challenge is therefore to develop a novel drug delivery which address this unmet medical need for better wound treatment of chronic and slow healing DFU. This study aimed to develop a biomaterial based nanofibrous wound dressing formulation containing deferoxamine (DFO), which reported as a potential therapeutic approach to improve wound healing. Deferoxamine regulates the expression and increase stability of hypoxia-inducible factor-1α (HIF-1 α), growthfactor that crucial in wound repair, and thus increase neovascularization. Preparation and characterization of chosen polymers; chitosan/ alginate/polyvinyl alcohol (PVA) for nanofiber formulation will be carried out. Such biodegradable polymer nanofiber is a great benefit for drug delivery owing to its high surface area to volume ratio and high porosity which creates ideal environment to aid in wound healing. Methods: Nanofibers loaded DFO will be fabricated by electrospinning
method that utilizes electrostatic force to produce fine fibers from the polymeric solution. Results: Various polymers concentrations and ratios are investigated to obtain the desired fibers characteristics. The selected optimized DFO nanofibers will be studied for its efficacy in wound healing through in-vivo animal studies. Conclusion: The proposed formulation would be an ideal low cost novel wound dressing with improved healing potential for efficient treatment
of diabetic foot ulcer.

Matched MeSH terms: Drug Delivery Systems
Fulltext miRNA nanotherapeutics: potential and challenges in respiratory disorders

Mehta M, Chellappan DK, Wich PR, Hansbro NG, Hansbro PM, Dua K

Future Med Chem, 2020 06;12(11):987-990.
PMID: 32270706 DOI: 10.4155/fmc-2020-0066
Matched MeSH terms: Drug Delivery Systems
Preparation and Characterization of Alginate Microparticles Containing a Model Protein for Oral Administration in Gnotobiotic European Sea Bass (Dicentrarchus labrax) Larvae

Yaacob EN, Goethals J, Bajek A, Dierckens K, Bossier P, De Geest BG, et al.

Mar Biotechnol (NY), 2017 Aug;19(4):391-400.
PMID: 28643227 DOI: 10.1007/s10126-017-9758-4

Aquaculture is the fastest growing animal production sector. However, the production of marine fish is still hampered by the high mortality rate in the first few weeks after hatching. Mortality in larvae is often caused by microbial infections. Today, the incorporation of immunostimulants into microparticles provides us new tools to enhance disease resistance in marine larviculture. In this study, we prepared alginate microparticles loaded with the model antigen fluorescein isothiocyanate conjugated-bovine serum albumin. Optimum concentrations of alginate and CaCl2, the correct alginate viscosity and the appropriate preparatory conditions led to the creation of desirable microparticles with the correct size for oral feeding in gnotobiotic European sea bass larvae. The prepared alginate microparticles were stable in sea water and were successfully ingested by gnotobiotic sea bass larvae at day after hatching 7 without causing any negative effects. Results suggest the suitability of this drug delivery system for targeting the innate immune system of fish larvae in order to enhance disease resistance and thus reduce mortality in larviculture.

Matched MeSH terms: Drug Delivery Systems
Oral Nanoemulsion of Fenofibrate: Formulation, Characterization, and In Vitro Drug Release Studies

Gulati N, Kumar Chellappan D, M Tambuwala M, A A Aljabali A, Prasher P, Kumar Singh S, et al.

Assay Drug Dev Technol, 2021 05 14;19(4):246-261.
PMID: 33989048 DOI: 10.1089/adt.2021.012

Nanoemulsions (NMs) are one of the most important colloidal dispersion systems that are primarily used to improve the solubility of poorly water soluble drugs. The main objectives of this study were, first, to prepare an NM loaded with fenofibrate using a high shear homogenization technique and, second, to study the effect of variable using a central composite design. Twenty batches of fenofibrate-loaded NM formulations were prepared. The formed NMs were subjected to droplet size analysis, zeta potential, entrapment efficiency, pH, dilution, polydispersity index, transmission electron microscopy (TEM), Fourier transform infrared spectrophotometry, differential scanning calorimetry (DSC), and in vitro drug release study. Analysis of variance was used for entrapment efficiency data to study the fitness and significance of the design. The NM-7 batch formulation demonstrated maximum entrapment efficiency (81.82%) with lowest droplet size (72.28 nm), and was thus chosen as the optimized batch. TEM analysis revealed that the NM was well dispersed with droplet sizes <100 nm. Incorporation of the drug into the NM was confirmed with DSC studies. In addition, the batch NM-7 also showed the maximum in vitro drug release (87.6%) in a 0.05 M sodium lauryl sulfate solution. The release data revealed that the NM followed first-order kinetics. The outcomes of the study revealed the development of a stable oral NM containing fenofibrate using the high shear homogenization technique. This approach may aid in further enhancing the oral bioavailability of fenofibrate, which requires further in vivo studies.

Matched MeSH terms: Drug Delivery Systems
Microwave non-destructive testing technique for characterization of HPMC-PEG 3000 films

Wong TW, Deepak KG, Taib MN, Anuar NK

Int J Pharm, 2007 Oct 1;343(1-2):122-30.
PMID: 17597317

The capacity of microwave non-destructive testing (NDT) technique to characterize the matrix property of binary polymeric films for use as transdermal drug delivery system was investigated. Hydroxypropylmethylcellulose (HPMC) and polyethylene glycol (PEG) 3000 were the choice of polymeric matrix and plasticizer, respectively with loratadine as the model drug. Both blank and drug loaded HPMC-PEG 3000 films were prepared using the solvent-evaporation method. These films were conditioned at the relative humidity of 25, 50 and 75% prior to physicochemical characterization using the established methods of ultra-violet spectrophotometry, differential scanning calorimetry and Fourier transform infrared spectroscopy methods, as well as, novel microwave NDT technique. Blank films exhibited a greater propensity of polymer-polymer interaction at the O-H domain upon storage at a lower level of relative humidity, whereas drug loaded films exhibited a greater propensity of polymer-polymer, polymer-plasticizer and/or drug-polymer interaction via the O-H, C-H and/or aromatic C=C functional groups when they were stored at a lower or moderate level of relative humidity. The absorption and transmission characteristics of both blank and drug loaded films for microwave varied with the state of polymer-polymer, polymer-plasticizer, and/or drug-polymer interaction of the matrix. The measurements of microwave NDT test at 8 and 12 GHz were sensitive to the polar fraction of film involving functional group such as O-H moiety and the less polar environment of matrix consisting of functional groups such as C-H and aromatic C=C moieties. The state of interaction between polymer, plasticizer and/or drug of a binary polymeric film can be elucidated through its absorption and transmission profiles of microwave.

Matched MeSH terms: Drug Delivery Systems
Evaluation of kappa carrageenan as potential carrier for floating drug delivery system: Effect of cross linker

Selvakumaran S, Muhamad II

Int J Pharm, 2015 Dec 30;496(2):323-31.
PMID: 26453788 DOI: 10.1016/j.ijpharm.2015.10.005

Genipin, a natural and non-toxic cross linker, was used to prepare cross linked floating kappa carrageenan/sodium carboxymethyl cellulose hydrogels and the effect of genipin on hydrogels characterization was investigated. Calcium carbonates were employed as gas forming agents. Ranitidine hydrochloride was used as drug. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were carried out to study the changes in the characteristics of hydrogels. Furthermore, scanning electron microscope (SEM) was performed to study microstructure of hydrogels. The result showed that all formulated hydrogels had excellent floating behavior. It was discovered that the cross linking reaction showed significant effect on gel strength, porosity and swelling ratio compared to non-cross linked hydrogels. It was found that the drug release was slower and lesser after being cross linked. Microstructure study shows that cross linked hydrogels exhibited hard and rough surface. Therefore, genipin can be an interesting cross linking agent for controlled drug delivery in gastrointestinal tract.

Matched MeSH terms: Drug Delivery Systems
Recent advances and prospects in gemcitabine drug delivery systems

Paroha S, Verma J, Dubey RD, Dewangan RP, Molugulu N, Bapat RA, et al.

Int J Pharm, 2021 Jan 05;592:120043.
PMID: 33152476 DOI: 10.1016/j.ijpharm.2020.120043

Cancer is a community health hazard which progress at a fatal rate in various countries across the globe. An agent used for chemotherapy should exhibit ideal properties to be an effective anticancer medicine. The chemotherapeutic medicines used for treatment of various cancers are, gemcitabine, paclitaxel, etoposide, methotrexate, cisplatin, doxorubicin and 5-fluorouracil. However, many of these agents present nonspecific systemic toxicity that prevents their treatment efficiency. Of all, gemcitabine has shown to be an active agent against colon, pancreatic, colon, ovarian, breast, head and neck and lung cancers in amalgamation with various anticancer agents. Gemcitabine is considered a gold-standard and the first FDA approved agent used as a monotherapy in management of advanced pancreatic cancers. However due to its poor pharmacokinetics, there is need of newer drug delivery system for efficient action. Nanotechnology has shown to be an emerging trend in field of medicine in providing novel modalities for cancer treatment. Various nanocarriers have the potential to deliver the drug at the desired site to obtain information about diagnosis and treatment of cancer. This review highlights on various nanocarriers like polymeric nanoparticles, solid lipid nanoparticles, mesoporous silica nanoparticles, magnetic nanoparticles, micelles, liposomes, dendrimers, gold nanoparticles and combination approaches for delivery of gemcitabine for cancer therapy. The co-encapsulation and concurrent delivery of Gem with other anticancer agents can enhance drug action at the cancer site with reduced side effects.

Matched MeSH terms: Drug Delivery Systems
Selective targeting of cancer signaling pathways with nanomedicines: challenges and progress

Barkat HA, Das SS, Barkat MA, Beg S, Hadi HA

Future Oncol, 2020 Dec;16(35):2959-2979.
PMID: 32805124 DOI: 10.2217/fon-2020-0198

Cancer is one of the leading causes of death worldwide. Regardless of advances in understanding the molecular mechanics of cancer, its treatment is still lacking and the death rates for many forms of the disease remain the same as six decades ago. Although a variety of therapeutic agents and strategies have been reported, these therapies often failed to provide efficient therapy to patients as a consequence of the inability to deliver right and adequate chemotherapeutic agents to the right place. However, the situation has started to revolutionize substantially with the advent of novel 'targeted' nanocarrier-based cancer therapies. Such therapies hold great potential in cancer management as they are biocompatible, tailored to specific needs, tolerated and deliver enough drugs at the targeted site. Their use also enhances the delivery of chemotherapeutics by improving biodistribution, lowering toxicity, inhibiting degradation and increasing cellular uptake. However, in some instances, nonselective targeting is not enough and the inclusion of a ligand moiety is required to achieve tumor targeting and enhanced drug accumulation at the tumor site. This contemporary review outlines the targeting potential of nanocarriers, highlighting the essentiality of nanoparticles, tumor-associated molecular signaling pathways, and various biological and pathophysiological barriers.

Matched MeSH terms: Drug Delivery Systems
Biomedical Applications of Aromatic Azo Compounds

Ali Y, Hamid SA, Rashid U

Mini Rev Med Chem, 2018;18(18):1548-1558.
PMID: 29792144 DOI: 10.2174/1389557518666180524113111

Azo dyes are widely used in textile, fiber, cosmetic, leather, paint and printing industries. Besides their characteristic coloring function, azo compounds are reported as antibacterial, antiviral, antifungal and cytotoxic agents. They have the ability to be used as drug carriers, either by acting as a 'cargo' that entrap therapeutic agents or by prodrug approach. The drug is released by internal or external stimuli in the region of interest, as observed in colon-targeted drug delivery. Besides drug-like and drug carrier properties, a number of azo dyes are used in cellular staining to visualize cellular components and metabolic processes. However, the biological significance of azo compounds, especially in cancer chemotherapy, is still in its infancy. This may be linked to early findings that declared azo compounds as one of the possible causes of cancer and mutagenesis. Currently, researchers are screening the aromatic azo compounds for their potential biomedical use, including cancer diagnosis and therapy. In this review, we highlight the medical applications of azo compounds, particularly related to cancer research. The biomedical significance of cis-trans interchange and negative implications of azo compounds are also discussed in brief.

Matched MeSH terms: Drug Delivery Systems

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links