We put attention on Intrinsic Josephson Junction (IJJ) to study the fundamental physic for device applications. Convenient self-flux method was used to grow BSCCO single crystals. We investigated the lid effect to examine the single crystal growth of high TC (Critical Temperature). We found that for the crystal growth with no lid, two stage transitions of TC ≅ 61 K and 77 K were observed. While for the crystal growth with lid, the BSCCO has TC ≅ 80K, ΔTC = 10K and approximately average size5x2mm 2 . When we increased weight of lid, the single crystal have increased to TC =80K, ΔTC = 4K and the typical size was ≅7x3mm 2 . TC and the crystal growth show a tendency to increase by the effect of the lid. From observed quasi-particle characteristics, c-axis direction changed from semiconductor to intrinsic Josephson characteristic with decreasing temperature.
Breast-feeding offers many benefits to the baby and the mother. For instance, breast milk provides the right balance of nutrients to help an infant grow into a strong and healthy toddler. Even though breastfeeding is a natural process, it is not always easy. In certain situations, some mothers are unable to breastfeed their babies or the babies are unable to adapt to breastfeeding. This will lead to the use of bottle-feeding. The effect of breast-feeding and bottle-feeding on physical growth has been well established but less has been concentrated on the craniofacial growth and dental development. This review reveals the effects of breast-feeding and bottle-feeding on craniofacial growth and dentoalveolar development based on the available literature.
This paper outlines the past five decades of scientific interests and advances in medicinal plant research in Malaysia. Initially the prime interest of research programmes has been on phytochemical studies leading to the discovery of biologically active compounds as chemical templates to produce new drug candidates. As the Malaysian herbal medicine market experiences an extraordinary growth, the research approaches taken have recently included activities to develop herbal medicines into quality, efficacious and safe products for human consumption. Advances in chromatographic and spectroscopic techniques have had a tremendous impact on the isolation and structure elucidation of the constituents of medicinal plants. The development of a series of bioassay methodologies and utilization of bioassay-guided isolation techniques have contributed significantly to the progress of medicinal plant research in Malaysia. Research work on some medicinal plants carried out by the local scientists will be illustrated as examples.
Effects of cultural practice under different habitats, of well-managed monoculture plantation and growing wild under rubber trees, were studied in Aquilaria malaccensis (Karas) leaves. This study was carried out on Karas growing in these two habitats each from Lipis, Pahang and Sepang, Selangor areas in Malaysia; under the control and induced treatments. The parameters studied include wet and dry weight of 50 matured leaves, iron and zinc elemental contents in leaf, iron and zinc uptakes from soil, and leaf and soil moisture contents. Iron and zinc were analysed in Karas leaves and soil by using Instrumental Neutron Activation Analysis (INAA) technique.
Field investigation on the operation of an industrial fluidized bed paddy dryer of 25 t/h capacity available in a processing complex of Padiberas Nasional Berhad (BERNAS) of Malaysia was carried out to assess its drying characteristics, energy consumption and quality of product during two paddy harvesting seasons. A grain drying simulation model was used to predict dryer performance which can be used as a basis for improving drying operations. For the first season (August-September), average drying rate was found to be 538 kg moisture/h to reduce moisture content (mc) from 36.98± 0.89% dry basis (db) to 27.58±0.79% (db) at 100-120°C of drying air temperature with a feed rate (capacity) of 7.75 t/h. In the second season (February-March), average drying rate was found to be 435 kg moisture/h to reduce mc from 28.14 ±0.68% (db) to 22.54 ± 0.69% (db) at 78-90°C drying air temperature with a feed rate of 9.5 t/h. The thermal and electrical energy consumptions were obtained as 7.57 and 0.97 MJ/kg water removed, respectively, for the first season, while 5.92 and 1.2 MJ/kg water removed for the second season. Higher head rice yield and whiteness and lower milling recovery were achieved during the first season than the second season at acceptable milling degree and transparency. Meanwhile, simulation results indicated that the dryer performed better in terms of increased drying capacity during the second than the first season; the dryer could be operated at 150°C to achieve almost double throughput capacity up to 20 t/h for the second season, while for the first season, high mc hindered the capacity to be at or below 7.75 t/h even when using higher a temperature of 160°C to reduce moisture to the desired final moisture of 24-25% (db). Proportion of slower vehicles based on users' opinion poll
Population growth and rise in per capital income have influenced the demand for convenience foods and a meat protein-rich diet. The per capital consumption of beef which had increased from 3.89 kg in 1980 to 5.49 kg in 2006 (DVS, 2006/2007) had resulted in an increased in demand for beef at the rate of 6.2% annually. The local beef production although recorded a 2.5% increased over the last 10 years, is still unable to meat the increasing national demand for beef. In 2008, local production of beef is about 38,250 mt. could only meet about 26.7% of the national demand (DVS, 2008). The gap between supply and demand for beef is expected to widen in the next decades unless efforts is been made to accelerate local production. The lack of number of quality breeding stocks and unorganized breeding system had been the major factors that contribute to the slow growth of the local beef industry.
This study aim to evaluate antimicrobial efficacy of sodium hypochlorite (NaOCl) and ozonated water against Enterococci faecalis biofilm. The bacterial biofilm was exposed to 2.62%, 1.31% NaOCl and 0.1 ppm ozonated water over a range of time periods. The presence of viable cells was determined by enumeration of colony forming units (CFU). All experiments were repeated four times (n=4). The effectiveness of the agents was compared using nonparametric Kruskal- Wallis test. The result revealed that 2.62% of NaOCl can completely kill E. faecalis biofilm in 15 minutes whereas 1.31 % NaOCl required a longer time to produce such effect. 0.1 ppm ozonated, however, did not exhibit any antimicrobial effect within the period of time tested. From this study, it can be concluded that 0.1 ppm ozonated water was not comparable with 2.62% and 1.31% NaOCl in antimicrobial efficacy against E. faecalis biofilm.
There has been a significant increase in research on probiotics-associated health benefits in the last 20 years. Many studies carried out in vitro and clinically show that consumption of probiotics inhibits the growth of pathogenic microorganisms. Furthermore, the consumption of probiotics also enhances the host immune response and decreases the levels of carcinogenesis-inducing enzymes. These positive outcomes have led to the use of probiotics in prevention and treatment of infectious diseases like bacterial or antibiotic associated diarrhea, chronic inflammatory bowel diseases and colon cancer. This review summarises literature pertaining to mechanistic actions of probiotics in improving the well-being of hosts.
A recently published meta-analysis showed that each additional serving of rice increased risk of type 2 diabetes mellitus (DM) by an alarming 11%. We investigated whether this phenomenon is seen in the Malaysian population by studying the effect of rice intake and added sugar consumption on fasting plasma glucose (FPG) and fasting triacylglycerol (TAG).
The production of ethanol, from glucose in batch and fed batch culture, was investigated. In the fed batch culture, the glucose feeding was added into the culture at 16th hour of fermentation. The effects of different glucose concentration feeding rates on ethanol fermentation were investigated for fed batch culture. The 2gL-1hr-1 glucose concentration feeding rate was found to give higher ethanol yield (2.47 g ethanol g glucose-1), with respect to substrate consumed as compared to 8 gL-1hr-1 (0.23 g ethanol g glucose-1) and 4 gL-1hr-1 (0.20 g ethanol g glucose-1). The ethanol yield with respect to substrate consumed obtained in batch culture was 0.81 g ethanol g glucose-1. The fed batch culture at 2 gL-1hr-1 glucose concentration feeding rate was proven to be a better fermentation system than the batch culture. The specific growth rate, specific glucose consumption rate and specific ethanol production rate for the fed batch fermentation, at 2 gL-1hr-1 glucose concentration feeding rate, were 0.065 hr-1, 1.20 hr-1 and 0.0009 hr-1, respectively.
Liberica coffee is the most important coffee species grown in Malaysia. However, there is little or no research at all conducted on coffee berries and green coffee beans since the plant itself is a low income crop in Malaysia. Therefore, research on Malaysian Liberica coffee can help to increase the knowledge of coffee farmers and coffee manufacturers in the processing and handling of the coffee. Physical properties of Liberica coffee berries and beans were investigated the current study. The properties investigated include the size, mass, density, coefficient of friction, angle of repose, fracture force and colour. In comparison to Arabica and Robusta coffee, Liberica coffee has the biggest size, mass, true density and fracture force values but were lower in bulk density in both berries and beans. The Liberica berries and beans were found to be orange-ish and yellowish colour respectively. Angle of repose was low and approximately similar in berries and beans while jute fibre gave the highest friction to both Liberica berries and beans.
Complicated crown-root fractures are rare and often need complex treatment planning. This paper describes a simplified treatment option for a complicated crown root fracture that minimally encroached into the biologic region in a growing child without the need for surgery or orthodontic treatment.
Lead-free solder paste printing processes account for the majority of assembly defects in the electronic manufacturing industry. In the stencil printing process, the solder paste must be able to withstand low and high shear rates which result in continuous structural breakdown and build-up. This study investigated the effect of the addition of nickel and platinum powders to the thixotropic behaviour of lead-free Sn/Ag/Cu solder pastes using the structural kinetic model. A hysteresis loop test and constant shear test were utilized to investigate the thixotropic behaviour of the pastes using parallel plate rheometry at 25ºC. In this study, the shear rates were increased from 0.01 s–1 to 10 s–1 and the second curve was a result of decreasing the shear rate from 10 s–1 to 0.01 s–1. For the constant shear test, the samples were subjected to five different shear rates of 0.01s–1, 0.1s–1, 1s–1, 10s–1 and 100s–1. The constant shear rate test was designed to study the structural breakdown and build-up of the paste materials. From this investigation, the hysteresis loop test was shown to be an effective test method to differentiate the extent of structural recovery in the solder pastes. All the pastes showed a high degree of shear thinning behaviour with time. This might be due to the agglomeration of particles in the flux that prohibited paste flow under low shear rate. The action of high shear rate would break the agglomerates into smaller pieces which facilitated the flow of pastes, thus viscosity was reduced at high shear rate.
This case series reports four patients who used religion and spirituality to relieve symptoms of post traumatic stress disorder (PTSD) following motor vehicle accidents. Their symptoms subsided after a few weeks and the recovery is sustained after one month. This demonstrates that in a country where psychological help is still scarce and religion is central to its culture, intervention based on spirituality and religion can be used as an alternative early intervention to relieve symptoms of PTSD and hence protects them from developing the condition.
Silicon nanowires were synthesized on Si substrates (111) via thermal evaporation using AuPd thin layer catalyst. Pre cleaned of Si wafer was used as a substrate to assemble the nanostructure products. In this work, the effect of growth temperature that ranging from 800 to 1000°C on the formation of silicon nanowires studied extensively. X-ray diffraction and field emission scanning electron microscope were employed to characterize the structures and morphology of nanowires. Vertical aligned silicon nanowires have been successfully grown on Si substrates at 900 and 1000°C. At 1100°C, the high aspect ratio of silicon nanowires can be produced but the formation density is low. The presence of AuPd catalyst on the tip of nanowires, it is expected that VLS is the most suitable to explain the growth mechanism of obtained SiNWs. The crystalline structure of SiNWs was proved by XRD data.
The nuts consumption pattern of Malaysian adults were assessed by a set of food frequency questionnaire collected from June to December 2008 from 364 adults (129 men and 235 women) which were selected by stratified random sampling from five areas of Penang state. Average total nuts consumption of 0.77 g/day among Penang adults was found to be no gender-specific difference but was significantly different (P
The detection of tetrodotoxin (TTX) and saxitoxin (STX) in dried salted yellow puffer fish (Xenopterus naritus) eggs bought from Satok Market, Kuching, Sarawak was carried out by mouse bioassay method. The amount of TTX and STX detected in the samples ranged from 95.6-195.5 Mouse Unit (MU)/g and 1.72-3.58 MU/g respectively. The results indicate that the dried salted eggs samples were found to contain TTX 9-20 times above the regulatory limit for human consumption (10 MU/g). Although detected, the amount of STX in salted eggs extract was slightly below the accepted threshold limit (4 MU/g). The local public in Sarawak should be educated on the potential danger of consuming dried salted puffer fish eggs in addition to the current warnings on puffer fish.
Bacillus cereus is a soil inhabitant gram positive bacterium, and is known to cause severe food poisoning. The objective of this study was to isolate and identify the presence of Bacillus cereus s.l. from selected ready to eat cereals purchased randomly from local supermarkets in Kuching and Kota Samarahan, Sarawak. The result showed that four of the 30 food samples were detected to be contaminated by B. cereus s.l. . Our findings suggested that it is important for the public to be aware of the safety of RTE cereals consumption, as it is possible that B. cereus s.l. may be present in high count number and pose hazardous health effects to the consumers.
A longitudinal study was conducted to relate basal metabolic rate (BMR) with growth during adolescence. Subjects comprise 70 boys and 69 girls aged between ten and thirteen years at the time of recruitment. Parameters studied include anthropometric measurements and BMR, which was measured by indirect calorimetry using the Deltatrac metabolic monitor. Measurements were carried out serially once every six months, with a total of 713 BMR data points collected over three years. Mean BMR of boys aged 11, 12, 13 and 14 years were 4.96 ± 0.63 MJ/day, 5.28 ± 0.71 MJ/day, 5.73 ± 0.68 MJ/day and 5.92 ± 0.63 MJ/day, respectively; while mean BMR of girls in the 10, 11, 12 and 13 year age groups were 4.96 ± 0.63 MJ/day, 4.85 ± 0.63 MJ/day, 5.05 ± 0.55 MJ/day and 4.94 ± 0.51 MJ/day, respectively. Comparison of measured BMR with BMR values predicted from the FAO/WHO/UNU (1985) equations shows that the predictive equations overestimated the BMR of Malaysian boys by 3% and that of girls by 5%. The Henry & Rees (1991) equations for populations in the tropics underestimated BMR of boys and girls by 1% and 2%, respectively. Linear regression equations to predict BMR based on body weight were derived according to sex and age groups. It is recommended that these predictive equations be used for the estimation of BMR of Malaysian adolescents.
Introduction: Amniotic fluid (AF) consists of heterogenous population of cells with high diagnostic
and therapeutic values. The study of rat amniotic fluid cells is very limited, despite the extensive use
of this animal model in biomedical research. Primary culture of rat AF cells, especially from full term pregnancies has not been well established. Here we attempt to determine the suitable medium in
culturing rat AF cells that would enhance the cell viability, growth rate and heterogeneity. Methods:
The cell viability, growth rate and heterogeneity of rat AF cells were compared upon culturing the
primary cells in two different media; Amniomax or RPMI. Cell viability study was carried out using
trypan blue staining, while the growth rate was monitored based on the time required to passage the cells (population doubling time in hour). The heterogeneity of cells was examined based on the morphology of the cells. Statistical analysis was performed using t-test. Results: Amniomax was observed to provide a better culture condition in culturing rat AF cells as the cells are more viable, grow faster and more heterogenous as compared to the cells grown in RPMI. Conclusion: Amniomax is a more suitable medium for high quality and viability of full term rat AF cell culture, as compared to RPMI. Thus, warranting propagation of more rat AF cells for biomedical research.