Displaying publications 61 - 80 of 305 in total

Abstract:
Sort:
  1. Kuan JW, Su AT, Leong CF
    J Clin Apher, 2017 Dec;32(6):517-542.
    PMID: 28485020 DOI: 10.1002/jca.21550
    Granulocyte-colony stimulating factor (G-CSF) mobilizes and increases the amount of hematopoietic stem cells in peripheral blood, enabling its harvest by few apheresis procedures. The pegylated G-CSF has longer half-life and is given once only, which is more comfortable for patients, whereas the non-pegylated requires multiple daily injection because of its short half-life. We summarized results of randomized trials comparing the efficacy and safety of pegylated and non-pegylated G-CSF for peripheral blood stem cell mobilization. We searched the Cochrane CENTRAL, MEDLINE, EMBASE, and two conference proceedings. Two authors made the selection, extracted data and evaluated methodological quality using GRADE independently. We used random-effects model for meta-analysis. We found 3956 records and retrieved 47 full texts. We included eight randomized trials with a total number of 554 randomized and 532 analyzed subjects. The meta-analysis included five trials because not all trials reported the same outcomes. Pooling data from two studies shows no evidence for a difference in the successful mobilization rate (CD34+ cell ≥ 2 × 106 /kg collected) between pegfilgrastim 6 mg (early administration) and filgrastim 5 µg/kg/day (147 participants; risk ratio (RR) 0.87, 95% confidence interval (95%CI) 0.67-1.11; P = .26). Pooling data from three studies shows no difference in the incidence of adverse events between pegylated and non-pegylated G-CSF (170 participants; RR 0.86, 95%CI 0.34-2.17; P = .75). No difference found on the quantity of CD34+ cells collected, number of apheresis procedure in successful mobilization, level of peak PB CD34+ cells achieved, and day of neutrophil and platelet engraftment.
    Matched MeSH terms: Polyethylene Glycols/adverse effects; Polyethylene Glycols/pharmacology*; Polyethylene Glycols/therapeutic use
  2. Dahlan Mohd, Mahathir Mohamed
    MyJurnal
    Polymer blends of 60/40 NR/HDPE were prepared using Brabender PL2000 Plasticorder with 60g capacity. The blends were added with radiation-sensitive natural rubber (NR)-based compatibilizer, known as LENRA. They were irradiated with electron-beam radiation at various doses. The efficacy of the compatibilizer was monitored by measuring various properties of the blends such as physical and dynamic mechanical properties including morphological studies by electron microscopic technique. Early results show that the addition of LENRA improves the properties of the TPNR blends.
    Matched MeSH terms: Polyethylene
  3. Mohd Rafi Mohd Solleh, Abdul Aziz Mohamed, Abd. Aziz Tajuddin, Faridah Idris, Mohamad Hairie Rabir, Muhammad Rawi Md Zin, et al.
    MyJurnal
    Thermal neutron beam from thermal column was selected for a Boron Neutron Capture Therapy
    (BNCT) system utilizing the Malaysian TRIGA MARK II reactor. Determination of shielding
    materials for fast and epithermal neutron was conducted. The materials selected were polyethylene,
    paraffin and water. For gamma-ray shielding, lead was used. The objective of this paper is to present
    the simulation and verification of an optimal design of BNCT collimation at a beam. line viewing the
    thermal column. A collimator was made from polyethylene pipe with 8 cm of diameter filled with
    paraffin.
    Matched MeSH terms: Polyethylene
  4. Praveena SM, Shaifuddin SNM, Akizuki S
    Mar Pollut Bull, 2018 Nov;136:135-140.
    PMID: 30509794 DOI: 10.1016/j.marpolbul.2018.09.012
    This study aims understand microplastics from personal care and cosmetic products in Malaysia via quantification and characterization of microplastics together with emission estimation to marine environment. A total of 214 respondents from all over Malaysia were surveyed with identification of top ten personal care and cosmetic products usage. Particles found in facial cleaner/scrub and toothpaste were colored and colorless with majority of granular shapes. Particles in toothpaste were found between 3 and 145 μm while particles in facial cleaner/scrub were found to be between 10 and 178 μm, stipulating the presence of microplastics. Plastic polymers (LDPE and polypropylene) were found in all facial cleaner/scrub samples while only plastic polymers (LDPE) were present in toothpaste sample G. A total of 0.199 trillion microplastics are expected to be released annually to marine environment in Malaysia. Personal care and cosmetic products are seen as one of the microplastics sources for Malaysia and worldwide.
    Matched MeSH terms: Polyethylene
  5. Nel HA, Dalu T, Wasserman RJ, Hean JW
    Sci Total Environ, 2019 Mar 10;655:567-570.
    PMID: 30476836 DOI: 10.1016/j.scitotenv.2018.11.261
    The quantification of microplastics in environmental samples often requires an observer to determine whether a particle is plastic or non-plastic, prior to further verification procedures. This implies that inconspicuous microplastics with a low natural detection may be underestimated. The present study aimed at assessing this underestimation, looking at how colour (white, green and blue), size (large; ~1000 μm and small; <400 μm) and grain size fraction may affect detection. Sediment treatments varying in grain size were inoculated with known quantities of low-density polyethylene microbeads extracted from commercially bought facial scrubs. These microbeads varied in colour and size. Once extracted using a density separation method microbeads were counted. An overall underestimation of 78.59% may be a result of observer error and/or technical error. More specifically, the results suggested that microbeads varying in colour and size have a different detection probability and that these microbead features are more important in underestimation likelihoods than grain sizes.
    Matched MeSH terms: Polyethylene
  6. Ainun Zuriyati Mohamed, Sarani Zakaria, Roslinda Shamsuddin, Mustaffa Abdullah
    This paper reports on the preparation of magnetic lumen loaded handsheets from bleached and unbleached mixed tropical hardwood kraft pulps. The lumen coating technique is a physical approach whereby fillers were deposited inside the fibre lumen. In order to produce magnetically responsive fibres, magnetic fillers were loaded into the fibre lumen. The magnetic filler chosen was magnetite which is usually used to make mylar as found in a diskette. Low and high molecular weights of polyacrylamide (PAM) were used as retention aids. The effect of different molecular weight of PAM on filler content in the bleached and unbleached handsheets were studied. The results showed that the amount of fillers deposited in the pulp fibres increased with increasing molecular weight of PAM using both pulps. However the bleached pulps gave better lumen loading than the unbleached when using high molecular weight of PAM.
    Matched MeSH terms: Polyethylene Terephthalates
  7. Hafizawati Zakaria, Norhamidi Muhamad, Abu Bakar Sulong, Mord Halim Irwan Ibrahim, Farhana Foudzi
    Sains Malaysiana, 2014;43:129-136.
    Micro powder injection molding (vim) is a promising process that may satisfy the demand on miniaturization parts to micro domain in mass production with low manufacturing cost. Three mol% yttria stabilized zirconia (Ysz) with nano-sized powder and binder system consists of polyethylene glycol (PEG), polymethyl methacrylate (PMMA) and stearic acid (sA) were used. Nano-size powders with higher surface area generally require more binder to form a feedstock. As such, determination of the optimum powder loading of the feedstock for 1UPIM process is important. The rheological characteristics of different YSZ feedstocks with powder loading of 52 53 and 54 vol.% were investigated in terms of flow behavior as a function of viscosity and shear rate. Fairly low values of flow behavior exponent ranging from 025 to 0.39 (n<1) resulted in pseudoplastic flow behavior of the examined Yszfeedstock. The 52 vol.% feedstock exhibited the lowest viscosity resulting in highest activation energy and lowest moldability index of 1.862x10-6, while the 54 vol.% feedstock regardless to its high viscosity, yielded a low activation energy of 4.14 kJImol and high moldability index of 4.59x10-6. Based on rheological properties obtained, a powder loading of 54 vol.% has desirable feedstock characteristics for iumm process and exhibited molding ability for micro detail filling. The relationship between the optimum rheological properties obtained and the actual injection process was also determined. The results showed that the green parts were able to be injected without defects such as short shot or flashing.
    Matched MeSH terms: Polyethylene Glycols
  8. Hussain A, Farrukh S, Hussain A, Ayoub M
    Environ Technol, 2019 Mar;40(7):843-854.
    PMID: 29161995 DOI: 10.1080/09593330.2017.1408696
    Most of the polymers and their blends, utilized in carbon capture membranes, are costly, but cellulose acetate (CA) being inexpensive is a lucrative choice. In this research, pure and mixed matrix membranes (MMMs) have been fabricated to capture carbon from natural gas. Polyethylene glycol (PEG) has been utilized in the fabrication of membranes to modify the chain flexibility of polymers. Multi-walled carbon nanotubes (MWCNTs) provide mechanical strength, thermal stability, an extra free path for CO2 molecules and augment CO2/CH4 selectivity. Membranes of pure CA, CA/PEG blend of different PEG concentrations (5%, 10%, 15%) and CA/PEG/MWCNTs blend of 10% PEG with different MWCNTs concentrations (5%, 10%, 15%) were prepared in acetone using solution casting techniques. Fabricated membranes were characterized using SEM, TGA and tensile testing. Permeation results revealed remarkable improvement in CO2/CH4 selectivity. In single gas experiments, CO2/CH4 selectivity is enhanced 8 times for pure membranes containing 10% PEG and 14 times for MMMs containing 10% MWCNTs. In mix gas experiments, the CO2/CH4 selectivity is increased 13 times for 10% PEG and 18 times for MMMs with 10% MWCNTs. Fabricated MMMs have a tensile strength of 13 MPa and are more thermally stable than CA membranes.
    Matched MeSH terms: Polyethylene Glycols
  9. Lee CY, Ooi IH
    PMID: 27618068 DOI: 10.3390/ph9030054
    Temozolomide (TMZ) is one of the most effective chemotherapeutic agents for glioblastoma multiforme, but the required high administration dose is accompanied by side effects. To overcome this problem and to further improve TMZ's efficacy, targeted delivery of TMZ by using polymeric nanoparticles has been explored. We synthesised the PLGA-PEG-FOL copolymer and attempted encapsulation of TMZ into PLGA-PEG-FOL nanoparticles using the emulsion solvent evaporation method and the nanoprecipitation method. Conjugation of PEG and FOL to PLGA has been reported to be able to increase the delivery of TMZ to the brain as well as targeting the glioma cells. However, despite making numerous modifications to these methods, the loading of TMZ in the nanoparticles only ranged between 0.2% and 2%, and the nanoparticles were between 400 nm and 600 nm in size after freeze-drying. We proceed with determining the release profile of TMZ in phosphate buffered saline (PBS). Our initial data indicated that TMZ was slowly released from the nanoparticles. The metabolite of TMZ rather than the parent compound was detected in PBS. Our study suggests that while PLGA-PEG-FOL can be used as a polymeric or encapsulation material for central delivery of TMZ, a practical and cost effective formulation method is still far from reach.
    Matched MeSH terms: Polyethylene Glycols
  10. Fatimah, A.R.H., Supri, A.G., Firuz, Z.
    MyJurnal
    In this study, compatibilizing effects of caprolactam-maleic anhydride (CL-MAH) and
    polyethylene-grafted-maleic anhydride (PE-g-MAH) with different blend compositions on polymer
    blends of recycled high density polyethylene (RHDPE) and ethylene vinyl acetate (EVA) blends were
    investigated by tensile properties and swelling behavior. The use of CL-MAH improved the
    compatibility of RHDPE80/EVA20 blend composition, and tensile properties of the resultant blend
    compared well with those of RHDPE/EVA blends. Addition of PE-g-MAH improved the tensile
    properties of RHDPE/EVA/PE-g-MAH blends than RHDPE/EVA blends without compatibilizer. The
    scanning electron microscopy (SEM) morphologies of fracture surface for RHDPE/EVA blends with
    presence of compatibilizers showing better incorporation of two different phases of polymer matrix.
    Matched MeSH terms: Polyethylene
  11. Liew KB, Ming LC, Goh BH, Peh KK
    Molecules, 2022 May 13;27(10).
    PMID: 35630605 DOI: 10.3390/molecules27103128
    A fast melt tablet (FMT) is well regarded as an alternative delivery system that might help resolve a patient's non-compliance issue. The main objective of this study was to develop a cocoa butter-based FMT. Additives, namely 5-15% of PEG 6000, beeswax, paraffin wax, and corn starch, were incorporated into the cocoa butter-based FMT to study the effects of these additives with the physical characteristic of a cocoa butter FMT. An optimum-based formulation was chosen according to the desired hardness and disintegration time and the taste masking property achieved with the model drug-dapoxetine. The analysis demonstrated that incorporating beeswax (15%) and paraffin wax (15%) could prolong the disintegration time by at least two-fold. On the contrary, the presence of corn starch was found to cause an increase in the hardness and reduction of the disintegration time. The disintegration mechanism might be presumed due to the synergistic effect of starch swelling and cocoa butter melting. The hardness value and in vitro disintegration time of the optimum formulation were recorded at 2.93 ± 0.22 kg and 151.67 ± 6.98 s. In terms of dissolution, 80% of dapoxetine was released within 30 min and the dissolution profile was comparable to the innovator product. The formulation was palatable and stable for at least 1 year. The exposure of the FMT formulation at 30 °C for 12 months was reported to be stable. Along with the sound palatability profile and high drug load capacity, the current formulation possesses the desired characteristics to be scaled up and marketed.
    Matched MeSH terms: Polyethylene Glycols
  12. Mahenthiran AV, Jawad ZA, Chin BLF
    Environ Sci Pollut Res Int, 2023 Dec;30(60):124654-124676.
    PMID: 35655021 DOI: 10.1007/s11356-022-20168-3
    The carbon dioxide (CO2) separation technology has become a focus recently, and a developed example is the membrane technology. It is an alternative form of enhanced gas separation performance above the Robeson upper bound line resulting in the idea of mixed matrix membranes (MMMs). With attention given to membrane technologies, the MMMs were fabricated to have the most desirable gas separation performance. In this work, blend MMMs were synthesised by using two polymers, namely, poly(ether sulfone) (PES) and poly (ethylene glycol) (PEG). These polymers were dissolved in blend N-methyl-2-pyrrolidone (NMP) and dimethylformamide (DMF) solvents with the functionalised multi-walled carbon nanotubes (MWCNTs-F) fillers by using the mixing solution method. The embedding of the pristine MWCNTs and MWCNTs-F within the new synthesised MMM was then studied towards CO2/N2 separation. In addition, the optimisation of the loading of MWCNTs-F for blend MMM for CO2/N2 separation was also studied. The experimental results showed that the functionalised MWCNTs (MWCNTs-F) were a better choice at enhancing gas separation compared to the pristine MWCNTs (MWCNTs-P). Additionally, the effects of MWCNTs-F at loadings 0.01 to 0.05% were studied along with the polymer compositions for PES:PEG of 10:20, 20:20 and 30:10. Both these parameters of study affect the manner of gas separation performance in the blend MMMs. Overall, the best performing membrane showed a selectivity value of 1.01 + 0.05 for a blend MMM (MMM-0.03F) fabricated with 20 wt% of PES, 20 wt% of PEG and 0.03 wt% of MWCNTs-F. The MMM-0.03F was able to withstand a pressure of 2 bar, illustrating its mechanical strength and ability to be used in the post combustion carbon capture application industries where the flue gas pressure is at 1.01 bar.
    Matched MeSH terms: Polyethylene Glycols
  13. Lai KL, Roziyanna A, Ogunniyi DS, Zainal AM, Azlan AA
    Med J Malaysia, 2004 May;59 Suppl B:61-2.
    PMID: 15468819
    Various blend ratios of high-density polyethylene (HDPE) and ultra high molecular weight polyethylene (UHMWPE) were prepared with the objective of determining their suitability as biomaterials. In the unfilled state, a blend of 50/50 (HDPE/UHMWPE) ratio by weight was found to yield optimum properties in terms of processability and mechanical properties. Hydroxyapatite (HA) was compounded with the optimum blend ratio. The effects of HA loading, varied from 0 to 50wt% for both filled and unfilled blends were tested for mechanical properties. It was found that the inclusion of HA in the blend led to a remarkable improvement of mechanical properties compared to the unfilled blend. In order to improve the bonding between the polymer blend and the filler, the HA used was chemically treated with a coupling agent known as 3-(trimethoxysiyl) propyl methacrylate and the treated HA was mixed into the blend. The effect of mixing the blend with silane-treated HA also led to an overall improvement of mechanical properties.
    Matched MeSH terms: Polyethylenes/analysis; Polyethylenes/chemical synthesis*; Polyethylene/analysis; Polyethylene/chemical synthesis*
  14. Hussain Z, Khan S, Imran M, Sohail M, Shah SWA, de Matas M
    Drug Deliv Transl Res, 2019 06;9(3):721-734.
    PMID: 30895453 DOI: 10.1007/s13346-019-00631-4
    On account of heterogeneity, intrinsic ability of drug resistance, and the potential to invade to other parts of the body (malignancy), the development of a rational anticancer regimen is dynamically challenging. Chemotherapy is considered the gold standard for eradication of malignancy and mitigation of its reoccurrence; nevertheless, it has also been associated with detrimental effects to normal tissues owing to its nonselectivity and nominal penetration into the tumor tissues. In recent decades, nanotechnology-guided interventions have been well-acclaimed due to their ability to facilitate target-specific delivery of drugs, avoidance of nontarget distribution, alleviated systemic toxicity, and maximized drug internalization into cancer cells. Despite their numerous biomedical advantages, clinical translation of nanotechnology-mediated regimens is challenging due to their short plasma half-life and early clearance. PEGylation of nanomedicines has been adapted as an efficient strategy to extend plasma half-life and diminished early plasma clearance via alleviating the opsonization (uptake by monocytes and macrophages) of drug nanocarriers. PEGylation provides "stealth" properties to nanocarrier's surfaces which diminished their recognition or uptake by cellular immune system, leading to longer circulation time, reduced dosage and frequency, and superior site-selective delivery of drugs. Therefore, this review aims to present a comprehensive overview of the pharmaceutical advantages and therapeutic feasibility of PEGylation of nanocarriers in improving tumor-specific targetability, reversing drug resistance, and improving pharmacokinetic profile of drugs and anticancer efficacy. Challenges to PEGylated cancer nanomedicines, possible adaptations to resolve those challenges, and pivotal requirement for interdisciplinary research for development of rational anticancer regimen have also been pondered.
    Matched MeSH terms: Polyethylene Glycols/administration & dosage*; Polyethylene Glycols/chemistry
  15. Butt AM, Mohd Amin MC, Katas H
    Int J Nanomedicine, 2015;10:1321-34.
    PMID: 25709451 DOI: 10.2147/IJN.S78438
    BACKGROUND: Doxorubicin (DOX), an anthracycline anticancer antibiotic, is used for treating various types of cancers. However, its use is associated with toxicity to normal cells and development of resistance due to overexpression of drug efflux pumps. Poloxamer 407 (P407) and vitamin E TPGS (D-α-tocopheryl polyethylene glycol succinate, TPGS) are widely used polymers as drug delivery carriers and excipients for enhancing the drug retention times and stability. TPGS reduces multidrug resistance, induces apoptosis, and shows selective anticancer activity against tumor cells. Keeping in view the problems, we designed a mixed micelle system encapsulating DOX comprising TPGS for its selective anticancer activity and P407 conjugated with folic acid (FA) for folate-mediated receptor targeting to cancer cells.

    METHODS: FA-functionalized P407 was prepared by carbodiimide crosslinker chemistry. P407-TPGS/FA-P407-TPGS-mixed micelles were prepared by thin-film hydration method. Cytotoxicity of blank micelles, DOX, and DOX-loaded micelles was determined by alamarBlue(®) assay.

    RESULTS: The size of micelles was less than 200 nm with encapsulation efficiency of 85% and 73% for P407-TPGS and FA-P407-TPGS micelles, respectively. Intracellular trafficking study using nile red-loaded micelles indicated improved drug uptake and perinuclear drug localization. The micelles show minimal toxicity to normal human cell line WRL-68, enhanced cellular uptake of DOX, reduced drug efflux, increased DOX-DNA binding in SKOV3 and DOX-resistant SKOV3 human ovarian carcinoma cell lines, and enhanced in vitro cytotoxicity as compared to free DOX.

    CONCLUSION: FA-P407-TPGS-DOX micelles show potential as a targeted nano-drug delivery system for DOX due to their multiple synergistic factors of selective anticancer activity, inhibition of multidrug resistance, and folate-mediated selective uptake.

    Matched MeSH terms: Polyethylene Glycols/pharmacokinetics; Polyethylene Glycols/chemistry
  16. Adam A, Marzuki A, Abdul Rahman H, Abdul Aziz M
    Vet Hum Toxicol, 1997 Jun;39(3):147-51.
    PMID: 9167243
    The toxicities of ROUNDUP and its component chemicals, glyphosate (N-phosphonomethylglycine) and polyoxyethyleneamine (POEA), were determined at 0, 1, 3, 6 and 24 h following administration to rats. The intratracheal administration of glyphosate (0.2 g/kg), POEA (0.1 g/kg), a mixture of glyphosate (0.2 g/kg) + POEA (0.1 g/kg), or ROUNDUP (containing 0.2 g/kg glyphosate and 0.1 g/kg POEA) elicited immediate respiratory effects which were more severe and which lasted longer in the groups receiving the POEA-containing preparations than in the glyphosate alone group. By 1 h, all test preparations had caused deaths, but more occurred from the POEA-containing preparations than from glyphosate. The po administration of POEA (1 g/kg), the mixture of glyphosate (2 g/kg) +POEA (1 g/kg), or ROUNDUP (containing 2 g/kg glyphosate and 1 g/kg POEA) produced diarrhea and blood-stained weeping from noses. Death was only seen from POEA at 24 h. Glyphosate (2 g/kg po) produced transient diarrhea without nose bleeds; POEA caused diarrhea at 1 h; and the mixture of POEA + glyphosate produced diarrhea later that increased in severity with time. Bloody nose secretions were seen only with the preparations that contained POEA. No deaths, respiratory effects or bloody nose secretions occurred in controls given saline. Both POEA and glyphosate caused lung hemorrhages and lung epithelial cell damage with po or intratracheal exposures. These results indicate POEA and preparations that contained POEA were more toxic than glyphosate.
    Matched MeSH terms: Polyethylene Glycols/administration & dosage; Polyethylene Glycols/toxicity*
  17. Chan WK, Azmi N, Mahadeva S, Goh KL
    World J Gastroenterol, 2014 Oct 21;20(39):14488-94.
    PMID: 25339836 DOI: 10.3748/wjg.v20.i39.14488
    To compare same-day whole-dose vs split-dose of 2-litre polyethylene glycol electrolyte lavage solution (PEG-ELS) plus bisacodyl for colon cleansing for morning colonoscopy.
    Matched MeSH terms: Polyethylene Glycols/administration & dosage*; Polyethylene Glycols/adverse effects
  18. Tiede A, Abdul-Karim F, Carcao M, Persson P, Clausen WHO, Kearney S, et al.
    Haemophilia, 2017 Jul;23(4):547-555.
    PMID: 28233381 DOI: 10.1111/hae.13191
    INTRODUCTION: Nonacog beta pegol (N9-GP) is a glycoPEGylated recombinant factor IX (FIX) with an extended half-life developed for routine prophylaxis and the prevention and treatment of bleeding episodes in patients with haemophilia B.

    AIM: The aim of this study was to evaluate the pharmacokinetics (PK) of N9-GP.

    METHODS: Data from 41 previously treated haemophilia B patients, enrolled globally (16 adolescents/adults and 25 children; FIX activity ≤0.02 IU mL-1) with no history of FIX inhibitors, were included. N9-GP was administered once-weekly as 10 IU kg-1or 40 IU kg-1in adolescents/adults and 40 IU kg-1in children. Blood was sampled up to 168 h (1 week) post dose. Standard PK was estimated on the basis of plasma FIX activity vs. time (PK profiles) using non-compartmental methods. Furthermore, a population PK analysis and FIX activity predictions were performed.

    RESULTS: Incremental recoveries were 0.02 (IU mL-1)/(IU kg-1) in both adolescents/adults and children. The extended half-life resulted in mean trough levels of 0.27 IU mL-1for adolescents/adults and 0.17 IU mL-1for children at steady-state after weekly dosing at 40 IU kg-1. The population PK analysis confirmed a mono-exponential decay in FIX activity and allowed for predictions of FIX activity for adolescents/adults above 0.15 IU mL-1at all times and 6.4 days week-1in children.

    CONCLUSION: N9-GP has the potential to shift previously treated haemophilia B patients from a severe/moderate disease state into a mild- or non-haemophilic range for most of the dosing interval, which is expected to reduce the number of bleeding episodes.

    Matched MeSH terms: Polyethylene Glycols/pharmacokinetics*; Polyethylene Glycols/therapeutic use
  19. Carcao M, Zak M, Abdul Karim F, Hanabusa H, Kearney S, Lu MY, et al.
    J Thromb Haemost, 2016 Aug;14(8):1521-9.
    PMID: 27174727 DOI: 10.1111/jth.13360
    Essentials Nonacog beta pegol is a recombinant glycoPEGylated factor IX with an extended half-life. This phase 3 trial investigated its safety/efficacy in previously treated hemophilia B boys ≤ 12 years. A 40 IU kg(-1) dose provided effective once-weekly prophylaxis and hemostasis when used to treat bleeds. Nonacog beta pegol was well tolerated in previously treated boys ≤ 12 years with hemophilia B.

    SUMMARY: Background Nonacog beta pegol is a recombinant glycoPEGylated factor IX with an extended half-life, developed to improve care for patients with hemophilia B. Objectives To investigate the safety, efficacy and pharmacokinetics of nonacog beta pegol for the prophylaxis and treatment of bleeds in previously treated children with hemophilia B. Patients/Methods This phase 3 trial, paradigm(™) 5, enrolled and treated 25 children (aged ≤ 12 years) with hemophilia B (FIX ≤ 2%). Patients were stratified by age (0-6 years and 7-12 years), and received once-weekly prophylaxis with 40 IU kg(-1) nonacog beta pegol for 50 exposure days. Results No patient developed inhibitors, and no safety concerns were identified. Forty-two bleeds in 15 patients were reported to have been treated; the overall success rate was 92.9%, and most bleeds (85.7%) resolved after one dose. The median annualized bleeding rates (ABRs; bleeds per patient per year) were 1.0 in the total population, 0.0 in the 0-6-year group, and 2.0 in the 7-12-year group; the estimated mean ABRs were 1.44 in the total population, 0.87 in the 0-6-year group, and 1.88 in the 7-12-year group. For 22 patients who had previously been receiving prophylaxis, the estimated mean ABR was 1.38 versus a historical ABR of 2.51. Estimated mean steady-state FIX trough levels were 0.153 IU mL(-1) (0-6 years) and 0.190 IU mL(-1) (7-12 years). Conclusion Nonacog beta pegol was well tolerated in previously treated children with hemophilia B; a 40 IU kg(-1) dose provided effective once-weekly prophylaxis and hemostasis when bleeds were treated.

    Matched MeSH terms: Polyethylene Glycols/pharmacokinetics*; Polyethylene Glycols/therapeutic use
  20. Buzayan MM, Ariffin YT, Yunus N
    J Prosthodont, 2013 Oct;22(7):591-5.
    PMID: 23551843 DOI: 10.1111/jopr.12036
    A method is described for the fabrication of a closed hollow bulb obturator prosthesis using a hard thermoforming splint material and heat-cured acrylic resin. The technique allowed the thickness of the thermoformed bulb to be optimized for weight reduction, while the autopolymerized seal area was covered in heat-cured acrylic resin, thus eliminating potential leakage and discoloration. This technique permits the obturator prosthesis to be processed to completion from the wax trial denture without additional laboratory investing, flasking, and processing.
    Matched MeSH terms: Polyethylene Glycols/chemistry; Polyethylene Terephthalates/chemistry
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links