The linear and the mass attenuation coefficients of Rhizophora spp. wood in the photon energy range of 11.22 - 28.43 keV were determined. This was done by studying the attenuation of x-ray fluorescent (XRF) photons from selenium, molybdenum, silver and tin targets. Both the Kα and Kβ peaks were utilised. The results were compared with theoretical values for average breast tissues for youngage, middle-age and old-age groups calculated by using a XCOM computer programme. The mass attenuation coefficient of Rhizophora spp. was found to be close to that of the calculated young-age breast in this photon energy range.
Developments of computer technology and image processing have shifted conventional industrial radiography application to industrial digital radiography (IDR) system. In this study, two types of IDR modules for non destructive testing (NDT), namely drum- and laser- type film digitizer with 50 μm pixel pitch have been evaluated for NDT applications. The modulation transfer function (MTF) and noise power spectrum (NPS) measurement were adapted to evaluate the image quality of IDR images. Results shown the averaged MTF for drum- and laser- type film digitizer at 20% modulation were 6.15 cycles/mm and 6.55 cycles/mm respectively. For NPS measurement and calculation, the result obtained shows that drum type film digitizer produced higher noise then laser type film digitizer. The study shows that the laser type film digitizer is the best system to be used for film digitization purposes because the MTF result shows that it modulates better than drum type and has the lowest and stable NPS.
Complex engineering systems are usually designed to last for many years. Such systems will face many uncertainties in the future. Hence the design and deployment of these systems should not be based on a single scenario, but should incorporate flexibility. Flexibility can be incorporated in system architectures in the form of options that can be exercised in the future when new information is available. Incorporating flexibility comes, however, at a cost. To evaluate if this cost is worth the investment a real options analysis can be carried out. This approach is demonstrated through analysis of a case study of a previously developed static system-of-systems for maritime domain protection in the Straits of Malacca. This article presents a framework for dynamic strategic planning of engineering systems using real options analysis and demonstrates that flexibility adds considerable value over a static design. In addition to this it is shown that Monte Carlo analysis and genetic algorithms can be successfully combined to find solutions in a case with a very large number of possible futures and system designs.
The stability of biocatalysts is an important criterion for a sustainable industrial operation economically. T1 lipase is a thermoalkalophilic enzyme derived from Geobacillus zalihae strain T1 (T1 lipase) that was isolated from palm oil mill effluent (POME) in Malaysia. We report here the results of high temperatures molecular dynamics (MD) simulations of T1 lipase in explicit solvent. We found that the N-terminal moiety of this enzyme was accompanied by a large flexibility and dynamics during temperature-induced unfolding simulations which preceded and followed by clear structural changes in two specific regions; the small domain (consisting of helices alpha3 and alpha5, strands beta1 and beta2, and connecting loops) and the main catalytic domain or core domain (consisting of helices alpha6- alpha9 and connecting loops which located above the active site) of the enzyme. The results suggest that the small domain of model enzyme is a critical region to the thermostability of this organism.
Polycystic ovary syndrome (PCOS) is a complex but frequently occurring endocrine abnormality. PCOS has become one of the leading causes of oligo-ovulatory infertility among premenopausal women. The definition of PCOS remains unclear because of the heterogeneity of this abnormality, but it is associated with insulin resistance, hyperandrogenism, obesity and dyslipidaemia. The main purpose of this study was to identify possible candidate genes involved in PCOS. Several genomic approaches, including linkage analysis and microarray analysis, have been used to look for candidate PCOS genes. To obtain a clearer view of the mechanism of PCOS, we have compiled data from microarray analyses. An extensive literature search identified seven published microarray analyses that utilized PCOS samples. These were published between the year of 2003 and 2007 and included analyses of ovary tissues as well as whole ovaries and theca cells. Although somewhat different methods were used, all the studies employed cDNA microarrays to compare the gene expression patterns of PCOS patients with those of healthy controls. These analyses identified more than a thousand genes whose expression was altered in PCOS patients. Most of the genes were found to be involved in gene and protein expression, cell signaling and metabolism. We have classified all of the 1081 identified genes as coding for either known or unknown proteins. Cytoscape 2.6.1 was used to build a network of protein and then to analyze it. This protein network consists of 504 protein nodes and 1408 interactions among those proteins. One hypothetical protein in the PCOS network was postulated to be involved in the cell cycle. BiNGO was used to identify the three main ontologies in the protein network: molecular functions, biological processes and cellular components. This gene ontology analysis identified a number of ontologies and genes likely to be involved in the complex mechanism of PCOS. These include the insulin receptor signaling pathway, steroid biosynthesis, and the regulation of gonadotropin secretion among others.
The paper discuss the design of 1-bit full adder circuit using Shannon theorem. This proposed full adder circuit is used as one of the circuit component for implementation of Non- Restoring and Restoring divider circuits. The proposed adder and divider schematics are designed by using DSCH2 CAD tool and their layouts are generated by Microwind 3 VLSI CAD tool. The divider circuits are designed by using standard CMOS 0.35 microm feature size and corresponding power supply 3.5 V. The parameters analyses are carried out by BSIM 4 analysis. We have compared the simulated results of the Shannon based divider circuit with CPL and CMOS adder cell based divider circuits. We have further compared the results with published results and observed that the proposed adder cell based divider circuit dissipates lower power, gives faster response, lower latency, low EPI and high throughput.
Computational chemistry is a discipline that concerns the computing of physical and chemical properties of atoms and molecules using the fundamentals of quantum mechanics. The expense of computational chemistry calculations is significant and limited by available computational capabilities. The use of high-performance computing clusters alleviate such calculations. However, as high-performance computing (HPC) clusters have always required a balance between four major factors: raw computing power, memory size, I/O capacity, and communication capacity. In this paper, we present the results of standard HPC benchmarks in order to help assess the performance characteristics of the various hardware and software components of a home-built commodity-class Linux cluster. We optimized a range of TCP/MPICH parameters and achieved a maximum MPICH bandwidth of 666 Mbps. The bandwidth and latency of GA put/get operations were better than the corresponding MPICH send/receive ones. We also examined the NFS, PVFS2, and Lustre parallel filesystems and Lustre provided the best read/write bandwidths with more than 90% of those of the local filesystem.
Background: Social misconduct amongst adolescents is a worrying and ever growing problem in Malaysia, despite efforts taken to overcome it.
Methods : A cross sectional study was conducted among secondary school students in Melaka Tengah District to measure the prevalence and determine the factors associated with social misconduct amongst adolescents. A total of 414 form four students were recruited by systematic random sampling fulfilling the study criteria between Jun to September 2008, from eight randomly selected secondary schools in the district. Data were collected using a structured self-administered questionnaire and analyzed using SPSS software version 12.0. Socio-demographic, housing and family factors in relation with social misconduct were studied.
Results : The prevalence of the social misconduct in this study was 70.5%. The most prevalent misconduct includes loitering (37.4%), truancy (30.0%), watching pornographic films (28.7%), and involved in pre-sexual activities (23.7%). The factors that showed significant association with social misconduct were sex and race.
Conclusion : The prevalence of social misconduct is high among adolescent and males as well as Malays are at higher risk. Activities planned for adolescents should be stressed on the danger and effects of social misconduct and be more focused towards male and Malay adolescents.
In this project, a Geographic Information System (GIS) was used to collect and compile various field data in the Pedro Vicente Maldonado Ecuadorian Scientific Station Antarctica Base area. The main source of data was obtained from a global positioning system (GPS) survey using kinematic GPS (GPS-RTK) which allowed continuous point mapping in the terrain. GPS units were utilized in the collection of spatial data for all field work. The co-ordinates obtained were used to produce a point map which was then exported into GIS software where the proximity of cartographic phenomena and boundaries were mapped. All the collected data were subsequently gathered to develop the GIS database which was then used to generate and compile different maps to test for spatial and temporal relationships. The output of the project comprises a GIS database, spatial maps and 3D terrain model of the area. The developed GIS database can be used with other ecological datasets to provide biogeographical information, potential range distribution and sampling adequacy. The database is also applicable to geographical management and multi-disciplinary research projects.
Indialite or α-cordierite was synthesized by glass crystallization method using mainly talc and kaolin and with small amount of MgO, Al2O3, SiO2 to compensate the chemical formulation of non-stoihiometric compositions of cordierite. (3MgO.1.5Al2O3.5SiO2). B2O3, P2O5 and CaO was also added to decrease the melting and sintering temperature of cordierite. The glasses were pelletized and sintered from 850 o C up to 1050 o C. Phase compositions of both heat treated glass was quantified by X-ray powder diffraction data by the Rietveld method using TOPAS Ver 3 software. Result shows that about 60wt% of α cordierite has successfully crystallized at 850 o C. Beside secondary phases (forsterite) which come from initial raw materials, phases from grinding media were also presents in the sample. The contamination was considered high since it has reacted with existence phases to form a new phase at higher temperature. Without any contamination from grinding it was expected to obtain more than 90wt% α cordierite using the same composition.
This study explores whether differences in levels of psychological well-being exist between the Orang Asli in Pertak and those in Gerachi Jaya. Field studies were conductecl on orang Asli in both these villages by using structured interviews. Psychological well-being questionnaires were modified by the researcher based on the Psychological Well-being Scale (Ryff 1989). Psychological well-being was measured in terms of autonomy, control environment, personal development and positive relationships. This study involved 40 Orang Asli from Gerachi City and 35 Orang Asli from Pertak. Data were analyzed with SPSS software using t-tests. Results show that the levels of psychological well-being between the two groups were not significantly different (t= 0.339, k> 0.05). Implications are also discussed.
The aim of this study is to investigate the factors that cause landslides in the area along the new road between Cameron Highlands and Gua Musang. Landslide factors such as lineaments have been extracted from remote sensing data (Landsat TM image) using ERDAS software. A soil map has been produced using field work and laboratory analysis, and the lithology, roads, drainage pattern and rainfall have been digitized using ILWIS software together with the slope angle and elevation from the Digital Elevation Model (DEM). All these parameters, which are vital for landslide hazard assessment, have been integrated into the geographical information system (GIS) for further data processing. Weightage for these landslide relevant factors related to their influence in landslide occurrence using the heuristic method has been carried out. The results from this combination through a modified ‘index overlay with multi class maps’ model was used to produce a landslide hazard zonation map. Five classes of potential landslide hazard have been derived as the following: very low hazard zone 17.27%, low hazard zone 39.35%, medium hazard zone 25.1%, high hazard zone 15.35% and very high hazard zone 2.93%. The results from this work have been checked through the landslide inventory using available aerial photos interpretation and field work, and show that the slope and elevation have the most direct affect on landslide occurrence.
This work studied the bioremediation of weathered crude oil (WCO) in coastal sediment samples using central composite face centered design (CCFD) under response surface methodology (RSM). Initial oil concentration, biomass, nitrogen and phosphorus concentrations were used as independent variables (factors) and oil removal as dependent variable (response) in a 60 days trial. A statistically significant model for WCO removal was obtained. The coefficient of determination (R(2)=0.9732) and probability value (P<0.0001) demonstrated significance for the regression model. Numerical optimization based on desirability function were carried out for initial oil concentration of 2, 16 and 30 g per kg sediment and 83.13, 78.06 and 69.92 per cent removal were observed respectively, compare to 77.13, 74.17 and 69.87 per cent removal for un-optimized results.
This paper describes the method used to develop the One Stop Crisis Centre (OSCC) Portal, an open-source web-based electronic patient record system (EPR) for the One Stop Crisis Center, Hospital Universiti Sains Malaysia (HUSM) in Kelantan, Malaysia. Features and functionalities of the system are presented to demonstrate the workflow. Use of the OSCC Portal improved data integration and data communication and contributed to improvements in care management. With implementation of the OSCC portal, improved coordination between disciplines and standardisation of data in HUSM were noticed. It is expected that this will in turn result in improved data confidentiality and data integrity. The collected data will also be useful for quality assessment and research. Other low-resource centers with limited computer hardware and access to open-source software could benefit from this endeavour.
A cross sectional study of thoracic pedicle morphometry in the immature spine of Malaysian population using reformatted computed tomographic (CT) images.
A linear quantitative structure activity relationship (QSAR) model is presented for modeling and predicting the inhibition of HIV-1 integrase. The model was produced by using the stepwise multiple linear regression technique on a database that consists of 67 recently discovered 1,3,4-oxadiazole substituted naphthyridine derivatives. The developed QSAR model was evaluated for statistical significance and predictive power. The key conclusion of this study is that valence connectivity index order 1, lowest unoccupied molecular orbital and dielectric energy significantly affect the inhibition of HIV-1 integrase activity by 1,3,4-oxadiazole substituted naphthyridine derivatives. The selected physicochemical descriptors serve as a first guideline for the design of novel and potent antagonists of HIV-1 integrase.
Three-dimensional (3D) models of the marginal hooks, dorsal and ventral anchors, bars and haptoral reservoirs of a parasite, Sundatrema langkawiense Lim & Gibson, 2009 (Monogenea) were developed using the polygonal modelling method in Autodesk 3ds Max (Version 9) based on two-dimensional (2D) illustrations. Maxscripts were written to rotate the modelled 3D structures. Appropriately orientated 3D haptoral hard-parts were then selected and positioned within the transparent 3D outline of the haptor and grouped together to form a complete 3D haptoral entity. This technique is an inexpensive tool for constructing 3D models from 2D illustrations for 3D visualisation of the spatial relationships between the different structural parts within organisms.
An intelligent gait-phase detection algorithm based on kinematic and kinetic parameters is presented in this paper. The gait parameters do not vary distinctly for each gait phase; therefore, it is complex to differentiate gait phases with respect to a threshold value. To overcome this intricacy, the concept of fuzzy logic was applied to detect gait phases with respect to fuzzy membership values. A real-time data-acquisition system was developed consisting of four force-sensitive resistors and two inertial sensors to obtain foot-pressure patterns and knee flexion/extension angle, respectively. The detected gait phases could be further analyzed to identify abnormality occurrences, and hence, is applicable to determine accurate timing for feedback. The large amount of data required for quality gait analysis necessitates the utilization of information technology to store, manage, and extract required information. Therefore, a software application was developed for real-time acquisition of sensor data, data processing, database management, and a user-friendly graphical-user interface as a tool to simplify the task of clinicians. The experiments carried out to validate the proposed system are presented along with the results analysis for normal and pathological walking patterns.