The purpose of this study was to determine the effects of 100% feedback frequencies, 65% of feedback frequencies and bandwidth feedback on overhand throwing skill among children and motivation of the children during practices. 60 of female students from range of aged 10 to 11 years old are participated in this study (age: M=10.53 years/SD=.503, weight: M=29.11/SD3.08, height=126.68/3.04). All participants practiced 60 trials of overhand throwing accuracy task and the motivation of the participant had been measured by using Intrinsic Motivation Inventory Questionnaire (IMI) (r=0.59). Participants were randomly assigned into three group 100% feedback, 65% feedback and bandwidth feedback groups. Learning was inferred from the performance on the delayed (24-hour) retention. To analyze the data, we use mixed-between ANOVA for practice phases, One Way ANOVA for retention test and correlation analysis to measure the relationship between feedback frequencies and motivation. There was no significant result between group (F (2, 57) =.286, p= .752) during practices, there is a significant difference on retention test phase (p
Paper recycling plants usually buy their raw material from suppliers. More than often, bulk used paper supplied to the plant contains some significant quantity of water in its internal voids. It may be included intentionally or unintentionally. The price of used paper depends on its weight, thus adding water will help to increase weight and consequently increase the price. In this way, plant owner who purchase the used paper suffers a significant of financial lost. The objectives of our experiment are to establish a calibration curve that correlate between the amount of neutron backscattered and water content, and finally to develop a correction factor that need to be introduced to the measured values of water content. A fast neutron source (Am-Be 241) and a portable backscattering neutron detector were used for water measurement. The experiments were carried out by measuring neutron backscattering from used paper that has been added with different amount of water. As a result, a neutron calibration curve that provides a correlation between neutron backscattering and water content was established.
Limb loading measurements serve as an objective evaluation of asymmetrical weight bearing in the lower limb. Digital weighing scales (DWSs) could be used in clinical settings for measurement of static limb loading. However, ambiguity exists whether limb loading measurements of DWSs are comparable with a standard tool such as MatScan. A cross-sectional study composed of 33 nondisabled participants was conducted to investigate the reliability, agreement, and validity of DWSs with MatScan in static standing. Amounts of weight distribution and plantar pressure on the individual lower limb were measured using two DWSs (A, B) and MatScan during eyes open (EO) and eyes closed (EC) conditions. The results showed that intra- and interrater reliability (3, 1) were excellent (0.94-0.97) within and between DWS A and B. Bland-Altman plot revealed good agreement between DWS and MatScan in EO and EC conditions. The area under the receiver operating characteristic curve was significant and identified as 0.68 (p = 0.01). The measurements obtained with DWSs are valid and in agreement with MatScan measurements. Hence, DWSs could be used interchangeably with MatScan and could provide clinicians an objective measurement of limb loading suitable for clinical settings.
Matched MeSH terms: Weights and Measures/instrumentation*
BACKGROUND: This study was to investigate the prevalence of single nucleotide polymorphisms (SNPs) in leptin gene LEP (A19G and G2548A) and leptin receptor gene LEPR (K109R and Q223R) and their association with fasting plasma leptin level (PLL) and obesity in a Malaysian suburban population in Kampar, Perak.
METHODS: Convenience sampling was performed with informed consents, and the study sample was drawn from patients who were patrons of the Kampar Health Clinic. A total of 408 subjects (mean age, 52.4 +/- 13.7 years; 169 men, 239 women; 190 obese, 218 non-obese; 148 Malays, 177 ethnic Chinese, 83 ethnic Indians) participated. Socio-demographic data and anthropometric measurements were taken, and genotyping was performed using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP).
RESULTS: The LEP A19G, G2548A and LEPR K109R, Q223R variant allele frequencies were 0.74, 0.67 and 0.61, 0.79, respectively. The genotype and allele distributions of these gene variants were significantly different among ethnic groups, but not among body mass index (BMI) classes. Subjects with LEPR K109 and Q223 allele had significantly higher systolic blood pressure and adiposity indices after adjustment for ethnicity (higher BMI, total body and subcutaneous fat; lower skeletal muscle percentage). Subjects with LEPR 109R allele had lower PLL than their wild-type allele counterparts. The influence of LEP A19G and G2548A SNPs on blood pressures, anthropometrics, and PLL was not evident. Interestingly, synergistic effect of the LEP and LEPR SNPs was observed as subjects homozygous for all four SNPs studied exhibited significantly higher subcutaneous fat and PLL than those with other genotype combinations.
CONCLUSIONS: The LEP and LEPR SNPs in this study may not be an obesity marker among Malaysians in this population, but were associated with ethnicity. Our findings suggest that each of these SNPs contributes to minor but significant variation in obesity-related traits and in combination they display synergistic effects on subcutaneous fat and PLL.
Traditionally it was thought that fitness-related traits such as male mating frequency, with a history of strong directional selection, should have little additive genetic variance and thus respond asymmetrically to bidirectional artificial selection. However, recent findings and theory suggest that a balance between selection for increased male mating frequency and opposing selection pressures on physiologically linked traits will cause male mating frequency to have high additive genetic variation and hence respond symmetrically to selection. We tested these hypotheses in the stalk-eyed fly, Cyrtodiopsis dalmanni, in which males hold harems comprising many females and so have the opportunity to mate at extremely high frequencies. We subjected male stalk-eyed flies to artificial selection for increased ('high') and decreased ('low') mating frequency in the presence of ecologically realistic, high numbers of females. High line males mated significantly more often than control or low line males. The direct response to selection was approximately symmetric in the high and low lines, revealing high additive genetic variation for, and no significant genetic constraints on, increased male mating frequency in C. dalmanni. In order to investigate trade-offs that might constrain male mating frequency under natural conditions we examined correlated responses to artificial selection. We measured accessory gland length, testis length and eyespan after 7 and 14 generations of selection. High line males had significantly larger accessory glands than low line males. No consistent correlated responses to selection were found in testis length or eyespan. Our results suggest that costs associated with the production and maintenance of large accessory glands, although yet to be identified, are likely to be a major constraint on mating frequency in natural populations of C. dalmanni.
We put attention on Intrinsic Josephson Junction (IJJ) to study the fundamental physic for device applications. Convenient self-flux method was used to grow BSCCO single crystals. We investigated the lid effect to examine the single crystal growth of high TC (Critical Temperature). We found that for the crystal growth with no lid, two stage transitions of TC ≅ 61 K and 77 K were observed. While for the crystal growth with lid, the BSCCO has TC ≅ 80K, ΔTC = 10K and approximately average size5x2mm 2 . When we increased weight of lid, the single crystal have increased to TC =80K, ΔTC = 4K and the typical size was ≅7x3mm 2 . TC and the crystal growth show a tendency to increase by the effect of the lid. From observed quasi-particle characteristics, c-axis direction changed from semiconductor to intrinsic Josephson characteristic with decreasing temperature.
This paper is about the reduction of the overall size of metal blanking sheet that is being used to form a stamping product or car body panel of a car manufacturer in Malaysia. The current blanking sheet produces extra waste which will be recycled and does not contribute to increase productivity but increases inventory cost. The reduction in the blanking sheet size will lead to the reduction of raw material hence reduced the production cost. However, the reduced size of blanking sheet could affect the yield strength of the product. The study of the yield strength and yield improvement of the product are done by simulating stress analysis by using CATIA software. The results show that the new proposed size of the metal blanking sheet provides accuracy of the product dimension as well as maintaining the yield strength of the product and it reduced a significant amount of metal scrap which is nearly 4% of material weight and save around 10% of inventory cost.
This paper presents an anthropometric database of high school and university students from Kuala Lumpur, Malaysia. Forty-one high school participants (21 males and 20 females), 13-17 years old, and 143 university students (74 males and 69 females) took part in the study. Twenty-one static body dimensions were measured. The greatest mean differences in the anthropometric data between male and female high school students were found in the sitting elbow height. In addition, a comparison of anthropometric data of male and female university students showed that data for males and females were significantly different, except for buttock-popliteal length, sitting elbow height and thigh clearance. The primary aim of this study was to develop an anthropometric database that could be used as a primary reference in designing products, devices and equipment for ergonomic learning environments.
High consumption of sugar-sweetened beverages (SSBs) among adolescents has turned into a global concern due to its negative impact on health. This cross-sectional study determined the amount of SSB consumption among adolescents and its associated factors. A total of 421 adolescents aged 13.3 ± 1.3 years (41.8% males, 58.2% females) completed a self-administered questionnaire on sociodemographic characteristics, physical activity, screen-viewing behavior, sleep quality, frequency of eating at fast food restaurants, home food availability, peer social pressure, parenting practice, and SSB consumption. Weight and height were measured. Results showed that the mean daily consumption of SSBs among adolescents was 1038.15 ± 725.55 mL. The most commonly consumed SSB was malted drink, while the least commonly consumed SSB was instant coffee. The multiple linear regression results revealed that younger age (β = -0.204, p < 0.001), higher physical activity (β = 0.125, p = 0.022), higher screen time (β = 0.147, p = 0.007), poorer sleep quality (β = 0.228, p < 0.001), and unhealthy home food availability (β = 0.118, p = 0.032) were associated with a higher SSB intake. Therefore, promoting a healthy lifestyle may help to reduce the excessive consumption of SSBs among adolescents.
General obesity, as reflected by BMI, is an established risk factor for esophageal adenocarcinoma (EAC), a suspected risk factor for gastric cardia adenocarcinoma (GCC) and appears unrelated to gastric non-cardia adenocarcinoma (GNCC). How abdominal obesity, as commonly measured by waist circumference (WC), relates to these cancers remains largely unexplored. Using measured anthropometric data from 391,456 individuals from the European Prospective Investigation into Cancer and Nutrition (EPIC) study and 11 years of follow-up, we comprehensively assessed the association of anthropometric measures with risk of EAC, GCC and GNCC using multivariable proportional hazards regression. One hundred twenty-four incident EAC, 193 GCC and 224 GNCC were accrued. After mutual adjustment, BMI was unrelated to EAC, while WC showed a strong positive association (highest vs. lowest quintile HR = 1.19; 95% CI, 0.63-2.22 and HR = 3.76; 1.72-8.22, respectively). Hip circumference (HC) was inversely related to EAC after controlling for WC, while WC remained positively associated (HR = 0.35; 0.18-0.68, and HR=4.10; 1.94-8.63, respectively). BMI was not associated with GCC or GNCC. WC was related to higher risks of GCC after adjustment for BMI and more strongly after adjustment for HC (highest vs. lowest quintile HR = 1.91; 1.09-3.37, and HR = 2.23; 1.28-3.90, respectively). Our study demonstrates that abdominal, rather than general, obesity is an indisputable risk factor for EAC and also provides evidence for a protective effect of gluteofemoral (subcutaneous) adipose tissue in EAC. Our study further shows that general obesity is not a risk factor for GCC and GNCC, while the role of abdominal obesity in GCC needs further investigation.
Analyses of conventional morphometric, meristic and truss morphometric were performed on two
species of Pangasiid catfish, Pangasius pangasius and P. nasutus. The purpose is to find characters that help in differentiating these two species to avoid confusion among fish farmers. Three morphometric approaches (conventional, meristic and truss morphometric) were employed to identify the morphological differences. Conventional morphometric suggested eye diameter, body width, body depth, dorsal fin base length and barbells as characters that have significant differences (P< 0.05) between the species, hence making them as potential diagnostic markers. Truss morphometric analyses approved that P. nasutus have larger dorsal fin base length as suggested by conventional morphometry data. Meristic analysis showed significant difference (P
Protein-rich by-products from the canning industry, especially dark flesh of skipjack, have limited uses due to several factors such as darken color, susceptibility to oxidation and off flavour. Protein hydrolysates from skipjack dark flesh was produced with different type of industrial proteases (Alcalase®2.4L FG, Protamex®, Neutrase®1.5MG and Flavourzyme®500MG) for 60, 120, 180 and 240 min with level of proteases used of 0.5, 1, 1.5 and 2% per weight of raw material. The degree of hydrolysis and free tryptophan content of hydrolysate were investigated. The results shows longer time with higher concentration of enzyme has increased the degree of hydrolysis. Alcalase®2.4L FG had the highest degree of hydrolysis among all proteases followed by Protamex®, Flavourzyme®500MG and Neutrase® 1.5MG. All enzymes increase free tryptophan content linearly with the increament of protease enzyme level. The longer the hydrolysis time, the higher the content of free tryptophan produced.
Monitoring clinical activity at the bedside in the intensive care unit (ICU) can provide useful information to evaluate nursing care and patient recovery. However, it is labour intensive to quantify these activities and there is a need for an automated method to record and quantify these activities. This paper presents an automated system, Clinical Activity Tracking System (CATS), to monitor and evaluate clinical activity at the patient's bedside. The CATS uses four Microsoft Kinect infrared sensors to track bedside nursing interventions. The system was tested in a simulated environment where test candidates performed different motion paths in the detection area. Two metrics, 'Distance' and 'Dwell time', were developed to evaluate interventions or workload in the detection area. Results showed that the system can accurately track the intervention performed by individual or multiple subjects. The results of a 30-day, 24-hour preliminary study in an ICU bed space matched clinical expectations. It was found that the average 24-hour intervention is 22.0minutes/hour. The average intervention during the day time (7am-11pm) is 23.6minutes/hour, 1.4 times higher than 11pm-7am, 16.8minutes/hour. This system provides a unique approach to automatically collect and evaluate nursing interventions that can be used to evaluate patient acuity and workload demand.
Matched MeSH terms: Weights and Measures/instrumentation*; Weights and Measures/standards
Cadaver body bags are the conventional method to contain a human body or human remains, which includes the use for storage and transportation of the deceased at any crime scene or disaster scene. During disasters, most often than not, the first responders including the police will be equipped with cadaver body bags to do scene processing of human remains and collection of personal belongings at the disaster site. However, in an unanticipated large scale disasters involving hundreds and thousands of fatalities, cadaver body bags supplies may be scarce. The authors have therefore innovated the cling film plastic wrap as an alternative for the cadaver body bag used at the disaster site. The plastic wrap was tested on six different experimental subjects, i.e. both adult and child mannequins; body parts of the mannequin figure (arm and hand); a human adult subject and an unknown dead body. The strengths of the cling film plastic wrap are discussed in comparison with the cadaver body bag in the aspects of costing, weight, duration of the wrap, water and body fluid resistant properties, visibility and other advantages. An average savings of more than 5000% are noted for both adult body wrap and child body wrap compared to the cadaver body wrap. This simply means that the authors can either wrap 25 adult dead bodies or 80 children dead bodies with the cost of 1 cadaver body bag. The cling film plastic wrap has proven to have significant innovation impact for dead body management particularly by the first responders in large scale disasters. With proper handling of dead bodies, first responders can manage the dead with dignity and respect in an overwhelmed situation to facilitate the humanitarian victim identification process later.
To assess the effect of dietary ascorbate on lipid metabolism, 1-year black sea bream (Acanthopagrus schlegelii) were reared on a casein-based purified diet and an ascorbate fortified diet (1,100 mg of L: -ascorbyl-2- monophosphate-Mg/kg diet). The fortified ascorbate was effectively incorporated into the fish body and elevated muscle carnitine content. Fortifications of dietary ascorbate depressed activities of glucose-6-phosphate dehydrogenase and NADP-isocitrate dehydrogenase as lipogenic enzymes in the hepatopancreas and intraperitoneal fat body. Starvation after feeding experiment activated carnitine palmitoyltransferase as a lipolysis enzyme in the hepatopancreas in both control and vitamin C(VC) groups, while the lipolysis activity was significantly higher in VC group. These results confirmed that dietary ascorbate depressed lipogenesis and activated lipolysis, i.e., influenced the lipid metabolism of black sea bream.
Free-piston engine generators (FPEGs) have huge potential to be the principal energy conversion device for generating electricity from fuel as part of a hybrid-electric vehicle (EV) powertrain system. The principal advantages lay in the fact that they are theoretically more efficient, more compact, and more lightweight compared to other competing EV hybrid and range-extender solutions (internal combustion engines, rotary engines, fuel cells, etc.). However, this potential has yet to be realized. This article details a novel dual-piston FPEG configuration and presents the full layout of a system and provides technical evidence of a commercial FPEG system's likely size and weight. The work also presents the first results obtained from a project which set-out to realize an operational FPEG system in hardware through the development and testing of a flexible prototype test platform. The work presents the performance and control system characteristics, for a first of a kind system; these show great technical potential with stable and repeatable combustion events achieved with around 700 W per cylinder and 26% indicated efficiency.
In this data article, we provide energy dispersive X-ray spectroscopy (EDX) spectra of the electrospun composite (SnO2-TiO2) nanowires with the elemental values measured in atomic and weight%. The linear sweep voltammetry data of composite and its component nanofibers are provided. The data collected in this article is directly related to our research article "Synergistic combination of electronic and electrical properties of SnO2 and TiO2 in a single SnO2-TiO2 composite nanowire for dye-sensitized solar cells" [1].
The dataset presented here are part of the data planned to produce biodiesel from flaxseed. Biodiesel production from flaxseed oil through transesterification process using KOH as catalyst, and the operating parameters were optimized with the help of face-centered central composite design (FCCD) of response surface methodology (RSM). The operating independent variables selected such as, methanol oil ratio (4:1 to 6:1), catalyst (KOH) weight (0.40-1.0%), temperature (35 °C-65 °C), and reaction time (30 min-60 min) were optimized against biodiesel yield as response. The maximum yield (98.6%) of biodiesel from flaxseed can achieved at optimum methanol oil ratio (5.9:1), catalyst (KOH) weight (0.51%), reaction temperature (59.2 °C), and reaction time (33 min). The statistical significance of the data set was tested through the analysis of variance (ANOVA). These data were the part of the results reported in "Optimization of process variables for biodiesel production by transesterification of flaxseed oil and produced biodiesel characterizations" Renewable Energy [1].
This data article is about bats observed from fragmented forest understories interspaced by agricultural plantations, utility corridors, and man-made structures within rural areas of Setiu (Bukit Kesing Forest Reserve and Ladang Tayor TDM) and Hulu Terengganu (Pengkalan Utama and Sungai Buweh, Kenyir) that are situated in Terengganu state, Peninsular Malaysia. Surveys were conducted from October 2018 until January 2019. These bats were captured using harp traps and mist nets that were set 30 m apart across flyways, streams, rivers and less cluttered trees in the 50 m transect zones (identified at each site). All animals captured were distinguished by morphology and released at the same location it was caught. The data comprise of 15 species of bats from four family groups, namely Hipposideridae, Pteropodidae, Rhinolophidae and Vespertilionidae. The data were interpreted into weight-forearm length (W-FA) to inform about bats Body Condition Index (-0.25 to 0.25).