Several treatment technologies are available for the treatment of palm oil mill wastes. Vermicomposting is widely recognized as efficient, eco-friendly methods for converting organic waste materials to valuable products. This study evaluates the effect of different vermicompost extracts obtained from palm oil mill effluent (POME) and palm-pressed fiber (PPF) mixtures on the germination, growth, relative toxicity, and photosynthetic pigments of mung beans (Vigna radiata) plant. POME contains valuable nutrients and can be used as a liquid fertilizer for fertigation. Mung bean seeds were sown in petri dishes irrigated with different dilutions of vermicomposted POME-PPF extracts, namely 50, 60, and 70% at varying dilutions. Results showed that at lower dilutions, the vermicompost extracts showed favorable effects on seed germination, seedling growth, and total chlorophyll content in mung bean seedlings, but at higher dilutions, they showed inhibitory effects. The carotenoid contents also decreased with increased dilutions of POME-PPF. This study recommends that the extracts could serve as a good source of fertilizer for the germination and growth enhancement of mung bean seedlings at the recommended dilutions.
The oil palm kernel shell biochar (OPKS-B) and oil palm kernel shell activated carbon (OPKS-AC) were used as a framework to entrap urea using adsorption method. Batch adsorption studies were performed to gauge the influence of contact time on the adsorption of urea onto both OPKS-B and OPKS-AC. To evaluate the physicochemical traits of the studied materials, energy dispersive X-ray spectrometer (EDS), N2-sorption, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), elemental analysis, differential thermal gravity (TG/DTG) and thermal gravity were applied. Result shows OPKS-AC has a better sorption capacity for urea compared to OPKS-B. The Langmuir isotherm model better justified the sorption isotherms of urea. For the adsorption process for both OPKS-B and OPKS-AC, the pseudo-second-order kinetic model was picked as it best fitted the experimental sorption outcome with the superior R2 values of > 65.1% and > 74.5%, respectively. The outcome of the experiments showcased that the maximum monolayer adsorption capacity of the OPKS-AC towards urea was 239.68 mg/g. OPKS-AC has showed promising attributes to be picked as an organic framework in the production of controlled release urea fertiliser for a greener and environmentally friendly agricultural practices.
Vermicomposting is a process in which earthworms are used to convert organic materials into humus-like material known as vermicompost. A number of researchers throughout the world have found that the nutrient profile in vermicompost is generally higher than traditional compost. In fact, vermicompost can enhance soil fertility physically, chemically and biologically. Physically, vermicompost-treated soil has better aeration, porosity, bulk density and water retention. Chemical properties such as pH, electrical conductivity and organic matter content are also improved for better crop yield. Nevertheless, enhanced plant growth could not be satisfactorily explained by improvements in the nutrient content of the soil, which means that other plant growth-influencing materials are available in vermicomposts. Although vermicomposts have been shown to improve plant growth significantly, the application of vermicomposts at high concentrations could impede growth due to the high concentrations of soluble salts available in vermicomposts. Therefore, vermicomposts should be applied at moderate concentrations in order to obtain maximum plant yield. This review paper discusses in detail the effects of vermicompost on soil fertility physically, chemically and biologically. Future prospects and economy on the use of organic fertilizers in the agricultural sector are also examined.
The valorization process involves transforming low-value materials such as wastes into high-value-added products. The current study aims to determine the potential of using a valorization process such as vermicomposting technology to convert palm oil mill byproduct, namely, decanter cake (DC), into organic fertilizer or vermicompost. The maturity of the vermicompost was characterized through various chemical and instrumental characterization to ensure the end product was safe and beneficial for agricultural application. The vermicomposting of DC showed significantly higher nutrient recovery and decreases in C:N ratio in comparison with the controls, particularly in the treatment with 2 parts DC and 1 part rice straw (w/w) (2DC:1RS). 2DC:1RS vermicompost had a final C:N ratio of 9.03 ± 0.12 and reasonably high levels of calcium (1.13 ± 0.05 g/kg), potassium (25.47 ± 0.32 g/kg), magnesium (4.87 ± 0.19 g/kg), sodium (7.40 ± 0.03 g/kg), and phosphorus (3.62 ± 0.27 g/kg). In addition, instrumental characterization also revealed a higher degree of maturity in the vermicompost. Ratios of 2921:1633 and DTG2:DTG3 also showed significant linear correlations with the C:N ratio, implying that those ratios could be used to characterize the progression of vermicompost maturity during the valorization process of DC.
The disposal of industrial paper mill sludge waste is a big issue and has a great importance all over the world. A study was conducted to determine the chemical properties of recycled paper mill sludge (RPMS) and assess its possibilities for land application. RPMS samples were collected from six different paper mills in Malaysia and analyzed for physical and chemical properties, heavy metals, polycyclic aromatic hydrocarbons, (13)C-NMR spectra and for the presence of dioxins/furans. The RPMS was dewatered, sticky with a strong odour, an average moisture of 65.08%, pH 7.09, cation exchange capacity (CEC) 14.43 cmol (+) kg(-1), N 1.45, P 0.18, K 0.12, Ca 0.82, Mg 0.73, Na 0.76 and Al, 1.38%. The polycyclic aromatic hydrocarbons (PAHs) and heavy metals levels were below the standard Class 2 limits. The dioxin and furan were in below the standard concentration of Class 1. The most prominent peak in the (13)C-NMR spectra of RPMS was centered at 31 ppm, proving the presence of methylene (-CH2) groups in long aliphatic chains, with lipids and proteins. The signal at 89 ppm and highly shielded shoulder at 83 ppm were due to presence of cellulose carbon C-4, and the peak at 63 and 65 ppm was due to the cellulose carbon spectrum. The RPMS therefore contains significant amount of nutrients with safe levels of heavy metals and PAHs for environment and can be used as a fertilizer and soil amendment for land application.
Integrated nutrient management systems using plant residues and inorganic P fertilizers have high potential for increasing crop production and ensuring sustainability in the tropics, but their adoption requires in-depth understanding of nutrient dynamics in such systems. This was examined in a highly weathered tropical soil treated with green manures (GMs) and P fertilizers in two experiments conducted in the laboratory and glasshouse. The treatments were factorial combinations of the GMs (Calopogonium caeruleum, Gliricidia sepium, and Imperata cylindrica) and P fertilizers (phosphate rocks [PRs] from North Carolina, China, and Algeria, and triple superphosphate) replicated thrice. Olsen P, mineral N, pH, and exchangeable K, Ca, and Mg were monitored in a laboratory incubation study for 16 months. The change in soil P fractions and available P was also determined at the end of the study. Phosphorus available from the amendments was quantified at monthly intervals for 5 months by 33P-32P double isotopic labeling in the glasshouse using Setaria sphacelata as test crop. The GMs were labeled with 33P to determine their contribution to P taken up by Setaria, while that from the P fertilizers was indirectly measured by labeling the soil with 32P. The P fertilizers hardly changed Olsen P and exchangeable cations during 16 months of incubation. The legume GMs and legume GM+P did not change Olsen P, lowered exchangeable Ca, and increased exchangeable K about threefold (4.5 cmol[+]kg(-1) soil) in the first 4 months, even as large amounts of NH4-N accumulated (approximately 1000 mg kg soil(-1)) and soil pH increased to more than 6.5. Afterwards, Olsen P and exchangeable Ca and Mg increased (threefold) as NH4+-N and soil pH declined. The legume GMs also augmented reversibly sorbed P in Al-P and Fe-P fractions resulting in high residual effect in the soil, while fertilizer-P was irreversibly retained. The GMs increased PR-P utilization by 40 to over 80%, mobilized soil P, and markedly enhanced uptake of N, K, Ca, and Mg. Thus GMs+PRs is an appropriate combination for correcting nutrient deficiencies in tropical soils.
Acid sulfate soils having a pH of less than 3.5 are widespread in Malaysia. Some of these soils are planted to cocoa, but the yield is reported to be low due to soil infertility related to Al toxicity. Cocoa growth is sensitive to the presence of Al in the soil. To a certain extent, Al toxicity in soils can be reduced by organic matter application and to a greater extent in iron-poor acid sulfate soil. A study was conducted to determine the efficacy of various types of organic materials easily available in the country to ameliorate acid sulfate soil infertility for growing cocoa seedlings. The treatments were control (nil), lime (3 t/ha), peat (10% w/w), peat plus green manure (10% w/w), peat plus rice straw (10% w/w), peat plus chicken dung (10% w/w) and peat plus POMS (Palm oil mill sludge) (10% w/w). The growth of cocoa seedlings was affected significantly by the presence of Al in the cocoa tissues. As the amount of Al in the leaves increased, the relative top dry weight of cocoa seedlings decreased. Likewise, the relative plant height was negatively correlated with Al in the leaves. Peat as well as peat in combination with green manure, rice straw, chicken dung or palm oil mill sludge was able to reduce Al toxicity in acid sulfate soil; the highest top dry weight of cocoa seedlings were obtained in the peat plus green manure treatment. The best cocoa seedlings root growth was found for the peat treatment alone. The relative top dry weight of cocoa seedlings was negatively correlated with Al(3+) as well as Al(3+)+Al(OH)(2+)+Al(OH)(2)(+) activity in the soil solution. The critical values for Al(3+) and the combination of Al(3+)+Al(OH)(2+)+Al(OH)(2)(+) activity in the soil solution were 10 microM and 15 microM, respectively.
Basal stem rot (BSR) caused by Ganoderma boninense is a major threat to sustainable oil palm production especially in Southeast Asia and has brought economic losses to the oil palm industry around the world. With no definitive cure at present, this study introduces a new fertilizer technology called GanoCare®, as an effort to suppress BSR incidence in oil palm. Experiments were carried out to evaluate the effect of GanoCare® on growth, physiology, and BSR disease suppression using sitting technique in the oil palm nursery stage. A follow-up using similar treatments was carried out in the field to test on severity of Ganoderma using baiting technique under natural condition. Treatments tested were 10 g/month and 30 g/three months given as pretreatment only or continuous treatment. Results showed that GanoCare® increased the height, bulb diameter, leaf area, chlorophyll content, photosynthesis rate, and fresh and dry weight of the leaf, bole, and root of oil palm seedlings in the nursery trial. Seedlings treated with GanoCare® exhibited reduced percentage of disease severity, incidence, and dead seedlings, compared to the control. In nursery and field, lowest percentage of dead seedlings due to Ganoderma was found in seedlings given combination of pretreatment and continuous treatment of 30 g/three months (T4) with 5.56 and 6.67%, while control seedlings significantly marked the maximum percentage of 94.45 and 93.33%. The most successful treatment in both nursery and field was T4 with disease reductions of 77.78 and 82.36%, respectively, proving that nutrients contained in GanoCare® are essential in allowing better development of a strong defense system in the seedlings.
Oil palm (Elaeis guineensis Jacq) is one of the major sources of edible oil. Reducing the effect of Ganoderma, main cause of basal stem rot (BSR) on oil palm, is the main propose of this study. Understanding the oil palm defense mechanism against Ganoderma infection through monitoring changes in the secondary metabolite compounds levels before/after infection by Ganoderma under different fertilizing treatment is required. Oil palm requires macro- and microelements for growth and yield. Manipulating the nutrient for oil palm is a method to control the disease. The 3-4-month-old oil palm seedlings were given different macronutrient treatments to evaluate induction of defense related enzymes and production of secondary metabolite compounds in response to G. boninense inoculation. The observed trend of changes in the infected and uninfected seedlings was a slightly higher activity for β-1,3-glucanases, chitinase, peroxidase, and phenylalanine ammonia-lyase during the process of pathogenesis. It was found that PR proteins gave positive response to the interaction between oil palm seedlings and Ganoderma infection. Although the responses were activated systematically, they were short-lasting as the changes in enzymes activities appeared before the occurrence of visible symptoms. Effect of different nutrients doses was obviously observed among the results of the secondary metabolite compounds. Many identified/unidentified metabolite compounds were presented, of which some were involved in plant cell defense mechanism against pathogens, mostly belonging to alkaloids with bitter-tasting nitrogenous-compounds, and some had the potential to be used as new markers to detect basal stem rot at the initial step of disease.
Global food security, which has emerged as one of the sustainability challenges, impacts every country. As food cannot be generated without involving nutrients, research has intensified recently to recover unused nutrients from waste streams. As a finite resource, phosphorus (P) is largely wasted. This work critically reviews the technical applicability of various water technologies to recover macro-nutrients such as P, N, and K from wastewater. Struvite precipitation, adsorption, ion exchange, and membrane filtration are applied for nutrient recovery. Technological strengths and drawbacks in their applications are evaluated and compared. Their operational conditions such as pH, dose required, initial nutrient concentration, and treatment performance are presented. Cost-effectiveness of the technologies for P or N recovery is also elaborated. It is evident from a literature survey of 310 published studies (1985-2022) that no single technique can effectively and universally recover target macro-nutrients from liquid waste. Struvite precipitation is commonly used to recover over 95 % of P from sludge digestate with its concentration ranging from 200 to 4000 mg/L. The recovered precipitate can be reused as a fertilizer due to its high content of P and N. Phosphate removal of higher than 80 % can be achieved by struvite precipitation when the molar ratio of Mg2+/PO43- ranges between 1.1 and 1.3. The applications of artificial intelligence (AI) to collect data on critical parameters control optimization, improve treatment effectiveness, and facilitate water utilities to upscale water treatment plants. Such infrastructure in the plants could enable the recovered materials to be reused to sustain food security. As nutrient recovery is crucial in wastewater treatment, water treatment plant operators need to consider (1) the costs of nutrient recovery techniques; (2) their applicability; (3) their benefits and implications. It is essential to note that the treatment cost of P and/or N-laden wastewater depends on the process applied and local conditions.
Estimating balanced nutrient requirements for soybean (Glycine max [L.] Merr) in China is essential for identifying optimal fertilizer application regimes to increase soybean yield and nutrient use efficiency. We collected datasets from field experiments in major soybean planting regions of China between 2001 and 2015 to assess the relationship between soybean seed yield and nutrient uptake, and to estimate nitrogen (N), phosphorus (P), and potassium (K) requirements for a target yield of soybean using the quantitative evaluation of the fertility of tropical soils (QUEFTS) model. The QUEFTS model predicted a linear-parabolic-plateau curve for the balanced nutrient uptake with a target yield increased from 3.0 to 6.0 t ha-1 and the linear part was continuing until the yield reached about 60-70% of the potential yield. To produce 1000 kg seed of soybean in China, 55.4 kg N, 7.9 kg P, and 20.1 kg K (N:P:K = 7:1:2.5) were required in the above-ground parts, and the corresponding internal efficiencies (IE, kg seed yield per kg nutrient uptake) were 18.1, 126.6, and 49.8 kg seed per kg N, P, and K, respectively. The QUEFTS model also simulated that a balanced N, P, and K removal by seed which were 48.3, 5.9, and 12.2 kg per 1000 kg seed, respectively, accounting for 87.1%, 74.1%, and 60.8% of the total above-ground parts, respectively. These results were conducive to make fertilizer recommendations that improve the seed yield of soybean and avoid excessive or deficient nutrient supplies. Field validation indicated that the QUEFTS model could be used to estimate nutrient requirements which help develop fertilizer recommendations for soybean.
Nitrogen (N) fertilizer is an important yield limiting factor for sunflower production. The correlation between yield components and growth parameters of three sunflower hybrids (Hysun-33, Hysun-38, Pioneer-64A93) were studied with five N rates (0, 60, 120, 180, 240 kg ha(-1)) at three different experimental sites during the two consecutive growing seasons 2008 and 2009. The results revealed that total dry matter (TDM) production and grain yield were positively and linearly associated with leaf area index (LAI), leaf area duration (LAD), and crop growth rate (CGR) at all three sites of the experiments. The significant association of yield with growth components indicated that the humid climate was most suitable for sunflower production. Furthermore, the association of these components can be successfully used to predict the grain yield under diverse climatic conditions. The application of N at increased rate of 180 kg ha(-1) resulted in maximum yield as compared to standard rate (120 kg ha(-1)) at all the experimental sites. In this way, N application rate was significantly correlated with growth and development of sunflower under a variety of climatic conditions. Keeping in view such relationship, the N dose can be optimized for sunflower crop in a particular region to maximize the productivity. Multilocation trails help to predict the input rates precisely while taking climatic variations into account also. In the long run, results of this study provides basis for sustainable sunflower production under changing climate.
One of the innovations introduced toward tackling the heightening of environmental impact is green technology. In the agricultural industry, the implementation of green fertilizer technology (GFT) for the modern development of environmentally friendly technology is a necessity. Within the Malaysian agriculture sector, the GFT application is needed to increase production levels among all crops. One of the essential commodities of all crops has always been paddy, given its status as the staple food among the country's population. Paddy production with the adoption of GFT potentially opens the path toward sustainable development in the industry as well as it also provides the food safety aspect. Moreover, this helps farmers to improve their productivity on paddy production in Malaysia. This paper attempts to evaluate the contributing socio-psychological factors, innovation attributes of environmental factors, and channels of communication to decision-making among farmers in Malaysia on GFT. Furthermore, this research also aims to assess the moderating role of cost between the farmer's behavioral intention and the adoption of GFT. The sampling process followed the stratified sampling technique-overall, 600 survey questionnaires were dispersed and 437 effective responses were received. The structural analysis results obtained have revealed significant positive effect for perceived awareness, attitude, group norm, perceived behavioral control, environmental concern, agro-environmental regulations, relative advantage, compatibility, trialability, and observability, and on farmer's behavioral intention, a significant effect for paddy farmer's behavioral intention in order to adopt of GFT. Further, the interaction effects of cost on the link between farmer's behavioral intention and adoption of GFT are statistically significant. Though, the finding could not back an outcome for the subjective norm, complexity, and mass media on farmer's behavioral intention. Finally, critical outcomes obtained in this research contribute to deepening the thoughtfulness of paddy farmers' adoption of GFT. This study concludes with policy recommendations and future directions of the research.
A mathematical model for the reaction-diffusion equation is developed to describe the nutrient release profiles and degradation of poly(lactic acid) (PLA)-coated controlled-release fertilizer. A multi-diffusion model that consists of coupled partial differential equations is used to study the diffusion and chemical reaction (autocatalytic degradation) simultaneously. The model is solved using an analytical-numerical method. Firstly, the model equation is transformed using the Laplace transformation as the Laplace transform cannot be inverted analytically. Numerical inversion of the Laplace transform is used by employing the Zakian method. The solution is useful in predicting the nutrient release profiles at various diffusivity, concentration of extraction medium, and reaction rates. It also helps in explaining the transformation of autocatalytic concentration in the coating material for various reaction rates, times of reaction, and reaction-multi diffusion. The solution is also applicable to the other biodegradable polymer-coated controlled-release fertilizers.
This study aims to assess the environmental impacts of conventional and organic rice cultivations and proposes a sustainable conceptual framework of rice farming based on the life cycle assessment (LCA) approach. A cradle-to-gate LCA was performed by using the ReCiPe 2016 method and SimaPro 8.5 software. The functional unit was one ton of rice grains harvested. Primary data were obtained from the farmer, while secondary data were collected from Ecoinvent 3.0, the Agri Footprint 3.0 database and the literature. The total characterization factors for global warming potential (GWP), water consumption potential (WCP) and fossil fuel depletion potential (FFP) were 457.89 kg CO2-eq, 98.18 m3 and 84.56 kg oil-eq, respectively, at the midpoint level for conventional rice, while the impacts for organic rice were 140.55 kg CO2-eq, 29.45 m3 and 22.25 kg oil-eq, respectively. At the endpoint level, the total characterization factors for human health damage (HH), ecosystem damage (ED) and resource availability (RA) for conventional rice were 9.63 × 10-4 DALY, 5.54 × 10-6 species.year and 30.98 Dollar, respectively, while for organic rice, the impacts were 2.60 × 10-4 DALY, 2.28 × 10-6 species.year and 8.44 Dollar, respectively. Rice cultivation impacted the environment, particularly in relation to three impact categories: GWP, WCP and FFP. The cultivation phase of rice production was the main contributor to environmental impacts due to the production and application of fertilizer and pesticides. It can be concluded that the application of LCA in agricultural sector is able to provide information and responses for policy makers in understanding the potential environmental impacts at various spatial levels.
Sewage sludge has long been regarded as a hazardous waste by virtue of the loaded heavy metals and pathogens. Recently, more advanced technologies are introduced to make use of the nutrients from this hazardous sludge. Successful recovery of sludge's carbon content could significantly convert waste to energy and promote energy sustainability. Meanwhile, the recovery of nitrogen and trace minerals allows the production of fertilizers. This review is elucidating the performances of modern thermal treatment technologies in recovering resources from sewage sludge while reducing its environmental impacts. Exhaustive investigations show that most modern technologies are capable of recovering sludge's carbon content for energy generation. Concurrently, the technologies could as well stabilize heavy metals, destroy harmful pathogens, and reduce the volume of sludge to minimize the environmental impacts. Nevertheless, the high initial investment cost still poses a huge hurdle for many developing countries. Since the initial investment cost is inevitable, the future works should focus on improving the profit margin of thermal technologies; so that it would be more financially attractive. This can be done through process optimization, improved process design as well as the use of suitable co-substrates, additives, and catalyst as propounded in the review.
The association of arbuscular mycorrhiza fungi (AMF) and roots undoubtedly
gives positive advantages to the host plant. However, heavily fertilised soil such as in oil
palm plantation, inhibit the growth of mycorrhiza. Thus, the aim of this research is to
distinguish and quantify the availability of AMF population and propagules at different sites
of an oil palm plantation by Most Probable Number (MPN) assay. In addition, root infection
method was employed to observe host compatibility through the propagation of AMF using
two different types of hosts, monocotyledon (Echinochloa cruss-galli) and dicotyledon
(Vigna radiata). Three different locations at an oil palm plantation were chosen for
sampling. Each location was represented by a distinctive soil series, and were further
divided into two sites, that is canopy and midway area. Midway site had a greater
population of AMF compared to canopy. The result showed that different environments
affect the availability of AMF in the soil. Higher number of AMF infection observed in
monocotyledon host suggests that the fibrous root system provide a better association
with mycorrhiza.
Batu Reput’ is primary sediment mineral and abundantly found in Perlis. Perlis is one of the major producers of ‘Batu Reput’ in Malaysia that content large deposit of high-purity dolomite [CaMg (CO3)2]. Pure samples of ‘Batu Reput’ recently explored in the Koperasi Rimba Mas Padang Besar Quarry were investigated for their physical, chemical and mineralogical composition. SEM and XRD analysis methods were applied. The potential of ‘Batu Reput’ as a raw material in fertilizer production was investigated in this paper.
A factorial experiment of three light intensities and three fertiliser levels was carried out on the potted seedlings of neobalanocarpus heimii as stock plants for subsequent rooting of cuttings. Light intensities used were 25%, 50% and 100% of the open sunlight and the fertilizer levels were 0 g, 1 g and 2 g plant-1 month-1. Results of 11 months after potting showed that the stock plants treated with 1 g and 2 g fertilizer had significantly better height and diameter increments than those without fertilizer in all light intensities tried. On the other hand, no significant effect of light intensity was obtained in height and diameter increments of the stock plants. Survival of stock plants of more than 86% was obtained in all light intensities tried with or without fertilizer application. Test on rooting of subsequent cuttings showed that light intensity of 25% and 0 g fertiliser, to stock plants gave the highest rooting percentage (73%) and the number of roots (2.0). The general trend showed that rooting decreased to below 60% when intensity of light was increased. In terms of size, cuttings with diameter between 1.2 mm and 2.3 mm is recommended as it yielded rooting of 65% to 75%. For practical application, a combination of 25% light intensity and 1 g of fertilizer plant-1 month-1 can be applied to the stock plants to maintain their healthy growth for continuous production of cutting materials for rooting.
One of the most significant chemical operations in the past century was the Haber-Bosch catalytic synthesis of ammonia, a fertilizer vital to human life. Many catalysts are developed for effective route of ammonia synthesis. The major challenges are to reduce temperature and pressure of process and to improve conversion of reactants produce green ammonia. The present review, briefly discusses the evolution of ammonia synthesis and current advances in nanocatalyst development. There are promising new ammonia synthesis catalysts of different morphology as well as magnetic nanoparticles and nanowires that could replace conventional Fused-Fe and Promoted-Ru catalysts in existing ammonia synthesis plants. These magnetic nanocatalyst could be basis for the production of magnetically induced one-step green ammonia and urea synthesis processes in future.